commit 9c41e1d91cc5b9561b7df1780ca0349545a75a47 Author: LittleGuo Date: Mon Sep 28 21:19:38 2026 +0800 新增工程cadproject diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..611f9a4 --- /dev/null +++ b/.gitignore @@ -0,0 +1,3 @@ +out/ +bin/ +lib/ \ No newline at end of file diff --git a/build.bat b/build.bat new file mode 100644 index 0000000..d9a1341 --- /dev/null +++ b/build.bat @@ -0,0 +1,4 @@ +::cmake --build --preset R190 +cmake --build --preset R230 --config release +cmake --build --preset R220 --config release +pause \ No newline at end of file diff --git a/cmake/ThirdPartyDeps.cmake b/cmake/ThirdPartyDeps.cmake new file mode 100644 index 0000000..c815145 --- /dev/null +++ b/cmake/ThirdPartyDeps.cmake @@ -0,0 +1,204 @@ +# cmake/ThirdPartyDeps.cmake + +message(STATUS ">>> 正在注册全局第三方 INTERFACE 目标...") + +# ========================================== +# 内部全局头文件 +# ========================================== +# 定义一个全局的内部接口目标，专门管理公共头文件 +add_library(ShsGlobalIncludes INTERFACE) +target_include_directories(ShsGlobalIncludes INTERFACE + "${CMAKE_SOURCE_DIR}/inc" + ) + +# ========================================== +# SQLite3 +# ========================================== +add_library(ThirdParty::SQLite3 UNKNOWN IMPORTED) +set_target_properties(ThirdParty::SQLite3 PROPERTIES + IMPORTED_LOCATION "sqlite3_x64.lib" + INTERFACE_INCLUDE_DIRECTORIES "${CMAKE_CURRENT_SOURCE_DIR}/inc" + INTERFACE_LINK_DIRECTORIES "${DEP_LIB_ROOT}/pub" +) + +# ========================================== +# cURL +# ========================================== +add_library(ThirdParty_cURL INTERFACE) +target_include_directories(ThirdParty_cURL INTERFACE "${DEP_INC_ROOT}/curl") +target_link_directories(ThirdParty_cURL INTERFACE "${DEP_LIB_ROOT}/curl/${CMAKE_GENERATOR_TOOLSET}") + +add_library(ThirdParty::cURL ALIAS ThirdParty_cURL) + +# ========================================== +# ObjectARX +# ========================================== +set(CURRENT_ARX_SDK "${CAD_SDK_ROOT}/R${CAD_SDK_VERSION}.${CAD_SDK_SUBVERSION}") + +add_library(ThirdParty_ARX INTERFACE) +# 保存 头文件目录 列表 +set(INC_DIRS + "${CURRENT_ARX_SDK}/inc" + "${CURRENT_ARX_SDK}/inc-x64" + "${CURRENT_ARX_SDK}/utils/amodeler/inc" + "${CURRENT_ARX_SDK}/utils/Atil/inc" + "${CURRENT_ARX_SDK}/utils/brep/inc" + "${CURRENT_ARX_SDK}/utils/HlrApi/inc" +) +# 保存 lib文件的目录 列表 +set(LIB_DIRS + "${CURRENT_ARX_SDK}/lib-x64" + "${CURRENT_ARX_SDK}/utils/amodeler/lib-x64" + "${CURRENT_ARX_SDK}/utils/Atil/lib-x64" + "${CURRENT_ARX_SDK}/utils/brep/lib-x64" + "${CURRENT_ARX_SDK}/utils/HlrApi/lib-x64" +) +# 需要依赖的库文件 +set(ARX_LIBS + acad.lib + accore.lib + rxapi.lib + acgiapi.lib + axdb.lib + aecmodeler.lib) + + list(APPEND ARX_LIBS + acdb${CAD_SDK_VERSION}.lib + acge${CAD_SDK_VERSION}.lib + acISMobj${CAD_SDK_VERSION}.lib + adui${CAD_SDK_VERSION}.lib + acui${CAD_SDK_VERSION}.lib + ac1st${CAD_SDK_VERSION}.lib + acgex${CAD_SDK_VERSION}.lib + acbr${CAD_SDK_VERSION}.lib) + + if (CAD_SDK_VERSION GREATER 19) + list(APPEND ARX_LIBS + acdrawbridge.lib) + endif() + + if (CAD_SDK_VERSION GREATER 23) + list(APPEND ARX_LIBS + acpal.lib + acgeoment.lib) + endif() + +# 保存头文件目录列表 (你的 INC_DIRS 保持不变) +target_include_directories(ThirdParty_ARX INTERFACE ${INC_DIRS}) + +# 保存库文件目录列表 (你的 LIB_DIRS 保持不变) +target_link_directories(ThirdParty_ARX INTERFACE ${LIB_DIRS}) + +# 🌟 这里的 ARX_LIBS 是个列表，直接扔给 link_libraries 就行了！ +target_link_libraries(ThirdParty_ARX INTERFACE ${ARX_LIBS}) + +# 穿上马甲 +add_library(ThirdParty::ARX ALIAS ThirdParty_ARX) + +# ========================================== +# ZW ZRX +# ========================================== +set(CURRENT_ZRX_SDK "${CAD_SDK_ROOT}/Z${CAD_SDK_VERSION}") +add_library(ThirdParty_ZRX INTERFACE) + +if (CAD_SDK_VERSION LESS 2025) + # 保存 头文件目录 列表 + set(INC_DIRS_Z + "${CURRENT_ZRX_SDK}/arxport" + "${CURRENT_ZRX_SDK}/arxport/arxport/pal/api" + + "${CURRENT_ZRX_SDK}/inc" + "${CURRENT_ZRX_SDK}/inc/arxport/pal/api" + + "${CURRENT_ZRX_SDK}/utils/amodeler/inc" + "${CURRENT_ZRX_SDK}/utils/amodeler/arxport" + + "${CURRENT_ZRX_SDK}/utils/ztil/inc" + "${CURRENT_ZRX_SDK}/utils/ztil/arxport" + + "${CURRENT_ZRX_SDK}/utils/brep/inc" + "${CURRENT_ZRX_SDK}/utils/brep/arxport" + + "${CURRENT_ZRX_SDK}/utils/hlr/inc" + "${CURRENT_ZRX_SDK}/utils/hlr/arxport" + ) + # 保存 lib文件的目录 列表 + set(LIB_DIRS_Z + "${CURRENT_ZRX_SDK}/lib-x64" + "${CURRENT_ZRX_SDK}/utils/amodeler/lib-x64" + "${CURRENT_ZRX_SDK}/utils/ztil/lib-x64" + "${CURRENT_ZRX_SDK}/utils/brep/lib-x64" + "${CURRENT_ZRX_SDK}/utils/hlr/lib-x64" + ) +else() # 大于2024版本,库文件重新调整,所有依赖都在根目录的arxport下 + set (ZRX_SDK_ARXPORT "${CURRENT_ZRX_SDK}/arxport") + set(INC_DIRS_Z + "${ZRX_SDK_ARXPORT}/inc" + "${ZRX_SDK_ARXPORT}/inc-x64" + + "${ZRX_SDK_ARXPORT}/utils/amodeler/inc" + + "${ZRX_SDK_ARXPORT}/utils/atil/inc" + + "${ZRX_SDK_ARXPORT}/utils/brep/inc" + + "${ZRX_SDK_ARXPORT}/utils/hlrapi/inc" + ) + # 保存 lib文件的目录 列表 + set(LIB_DIRS_Z + "${ZRX_SDK_ARXPORT}/lib-x64" + "${ZRX_SDK_ARXPORT}/utils/amodeler/lib-x64" + "${ZRX_SDK_ARXPORT}/utils/atil/lib-x64" + "${ZRX_SDK_ARXPORT}/utils/brep/lib-x64" + "${ZRX_SDK_ARXPORT}/utils/hlrapi/lib-x64" + ) +endif() +# 需要依赖的库文件 +set(ARX_LIBS_Z + ZwBase.lib + ZWCAD.lib + ZwAuto.lib + ZwRx.lib + ZwZrx.lib + ZwGeometry.lib + ZwDatabase.lib + ZwDatabaseMgd.lib + ZwdUI.lib + ZwGs.lib + ZwTc.lib + ZwUI.lib + ZwBrep.lib + ZwAECModeler.lib) + +# 保存头文件目录列表 (你的 INC_DIRS 保持不变) +target_include_directories(ThirdParty_ZRX INTERFACE ${INC_DIRS_Z}) + +# 保存库文件目录列表 (你的 LIB_DIRS 保持不变) +target_link_directories(ThirdParty_ZRX INTERFACE ${LIB_DIRS_Z}) + +# 🌟 这里的 ARX_LIBS 是个列表，直接扔给 link_libraries 就行了！ +target_link_libraries(ThirdParty_ZRX INTERFACE ${ARX_LIBS_Z}) + +# 穿上马甲 +add_library(ThirdParty::ZRX ALIAS ThirdParty_ZRX) + +# ========================================== +# bitanswer +# ========================================== +add_library(ThirdParty_BitAnswer INTERFACE) +target_link_directories(ThirdParty_BitAnswer INTERFACE "${DEP_LIB_ROOT}/pub") +add_library(ThirdParty::BitAnswer ALIAS ThirdParty_BitAnswer) + +# ========================================== +# modernGlue +# ========================================== +add_library(ThirdParty_modernGlue INTERFACE) +target_include_directories(ThirdParty_modernGlue INTERFACE "${DEP_INC_ROOT}/modernGlue") +add_library(ThirdParty::modernGlue ALIAS ThirdParty_modernGlue) + +# ========================================== +# cadOcr +# ========================================== +add_library(ThirdParty_CadOcr INTERFACE) +target_include_directories(ThirdParty_CadOcr INTERFACE "${DEP_INC_ROOT}/cadOcr") +add_library(ThirdParty::CadOcr ALIAS ThirdParty_CadOcr) \ No newline at end of file diff --git a/cmake/functions.cmake b/cmake/functions.cmake new file mode 100644 index 0000000..4ded680 --- /dev/null +++ b/cmake/functions.cmake @@ -0,0 +1,296 @@ +# cmake/functions.cmake + +# 判断时否时中望版本 +function (IsZWCAD out) + if (DEFINED CACHE{ZWCAD}) + set(${out} TRUE PARENT_SCOPE) + else() + set(${out} FALSE PARENT_SCOPE) + endif() +endfunction() + +function(apply_arx_definitions TARGET_NAME) + if(MSVC) + target_compile_definitions(${TARGET_NAME} PRIVATE + _ALLOW_RTCc_IN_STL + _WIN32_IE=0x0600 + WIN + WIN32 + _CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES=1 + _CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES_COUNT=1 + _AFXDLL + UNICODE + _UNICODE + #_CRT_STDIO_ISO_WIDE_SPECIFIERS=0 + ) + endif() +endfunction() + + +function(apply_arx_optimization TARGET_NAME) + if(MSVC) + # ========================================== + # Debug 配置选项 + # ========================================== + target_compile_options(${TARGET_NAME} PRIVATE + $<$:/Od> # 禁用优化 (Optimization: Disabled) + $<$:/Zi> # 禁用优化 (Optimization: Disabled) + $<$:/Ob0> # 禁用优化 (Optimization: Disabled) + #$<$:/RTC1> # 启用快速检查 (BasicRuntimeChecks: EnableFastChecks) + #$<$:/RTCc> # 较小类型检查 (SmallerTypeCheck: true) + ) + + # ========================================== + # Release 配置选项 + # ========================================== + target_compile_options(${TARGET_NAME} PRIVATE + $<$:/O2> # 最大优化速度 (Optimization: MaxSpeed) + $<$:/Ob2> # 任何合适的内联扩展 (InlineFunctionExpansion: AnySuitable) + $<$:/Oi> # 启用内部函数 (IntrinsicFunctions: true) + $<$:/Ot> # 代码速度优先 (FavorSizeOrSpeed: Speed) + $<$:/Oy> # 省略帧指针 (OmitFramePointers: true)[cite: 2] + $<$:/GT> # 纤程安全优化 (EnableFiberSafeOptimizations: true)[cite: 2] + ) + + # 预处理器宏定义 + target_compile_definitions(${TARGET_NAME} PRIVATE + $<$:_NDEBUG=1> # 预处理器定义 (PreprocessorDefinitions)[cite: 2] + $<$:NDEBUG=1> # 预处理器定义 (PreprocessorDefinitions)[cite: 2] + ) + + if (DEFINED(WholeProgramOptimization)) + # 注意: 这里的 /GL (WholeProgramOptimization) 配合下方的 /LTCG 使用[cite: 2] + target_compile_options(${TARGET_NAME} PRIVATE + $<$:/GL> + ) + # 链接器选项 + target_link_options(${TARGET_NAME} PRIVATE + $<$:/LTCG> # 链接时代码生成 (LinkTimeCodeGeneration: UseLinkTimeCodeGeneration)[cite: 2] + ) + endif() + + endif() +endfunction() + +# 简单判断是中望还是ACAD，根据结果来链接相应sdk +function (simple_link_cad_sdk + TARGET_NAME) + + IsZWCAD(isZW) + + if (isZW) + target_link_libraries(${TARGET_NAME} PRIVATE ThirdParty::ZRX) + else() + target_link_libraries(${TARGET_NAME} PRIVATE ThirdParty::ARX) + endif() + + apply_arx_optimization(${TARGET_NAME}) + apply_arx_definitions(${TARGET_NAME}) + +endfunction() + +function (get_sdk_version out) + IsZWCAD(isZW) + set(VER ${CAD_SDK_VERSION}) + if (isZW) + string(REGEX MATCH "..$" VER "${CAD_SDK_VERSION}") + endif() + set(${out} ${VER} PARENT_SCOPE) +endfunction() + +# 根据 ZWCAD宏,来判断需要的def文件名称,保存到表_SOURCES 里面 +function (add_def_file_name + _SOURCES + _BASE_NAME) + + set (tmp "${${_SOURCES}}") + + IsZWCAD(isZW) + + if (isZW) + list(APPEND tmp "${_BASE_NAME}_zrx.def") + else() + list(APPEND tmp "${_BASE_NAME}.def") + endif() + + set(${_SOURCES} "${tmp}" PARENT_SCOPE) + +endfunction() + +# 得到加密类型 +function(get_encryption_modes + _modes) + + set (tmp "${${_modes}}") + + list(APPEND tmp "BAL_REMOTE" "TRIAL_YEAR") + + set(${_modes} "${tmp}" PARENT_SCOPE) + +endfunction() + +# 根据加密方式为工程设置宏和输出路径 +function(set_encryption_definitions_and_output_path + TARGET_NAME + MODE) + # ${TRIAL_YEAR} 在 cmakepresets.json内定义 + # ${PRODUCT} 在 cmakepresets.json内定义 + + # 下面处理加密 + if (MODE STREQUAL "TRIAL_YEAR") # TRIAL_YEAR 理论上不需要debug模式 + target_compile_definitions(${TARGET_NAME} PRIVATE + BAL_REMOTE # TRIAL_YEAR加密默认BAL_REMOTE宏 + $<$:TRIAL_YEAR=${TRIAL_YEAR}> # ${TRIAL_YEAR} 在 cmakepresets.json内定义 + $<$:WF2023> + $<$:${PRODUCT}> + ) + else() + target_compile_definitions(${TARGET_NAME} PRIVATE + # 实际上，debug版本一直要带着加密，默认是BAL_REMOTE,但由于程序中检测加密锁是auto模式， REMOTE和LOCAL模式都可以通过验证 + $<$:WF2023> + $<$:BAL_REMOTE> + $<$:${PRODUCT}> + $<$:${MODE}> + ) + endif() + + + set_target_properties(${TARGET_NAME} PROPERTIES + RUNTIME_OUTPUT_DIRECTORY_DEBUG + # 和上面的target_compile_definitions() debug 的情况一致使用 /WF2023/BAL_REMOTE 做为目录 + "${GLOBAL_BIN_DIR}/Debug-x64-${GENERATE_DIR_TAG}/WF2023/BAL_REMOTE") + + set_target_properties(${TARGET_NAME} PROPERTIES + RUNTIME_OUTPUT_DIRECTORY_RELEASE + "${GLOBAL_BIN_DIR}/Release-x64-${GENERATE_DIR_TAG}/${PRODUCT}-${MODE}") + + set_target_properties(${TARGET_NAME} PROPERTIES + ARCHIVE_OUTPUT_DIRECTORY_DEBUG + "${GLOBAL_LIB_DIR}/Debug-x64-${GENERATE_DIR_TAG}/WF2023-BAL_REMOTE" + ) + set_target_properties(${TARGET_NAME} PROPERTIES + ARCHIVE_OUTPUT_DIRECTORY_RELEASE + "${GLOBAL_LIB_DIR}/Release-x64-${GENERATE_DIR_TAG}/${PRODUCT}-${MODE}" + ) + + target_link_libraries(${TARGET_NAME} PRIVATE ThirdParty::BitAnswer) +endfunction() + +function(target_link_objectarx + TARGET_NAME + # 每个工程的dll标识宏都不一样，所以这里允许传入宏定义 + _EXTENSION + ) + + if (ARGC LESS 2) + message(FATAL_ERROR "target_link_objectarx() 函数至少需要两个参数: TARGET_NAME 和 _EXTENSION") + endif() + + target_link_libraries(${TARGET_NAME} PRIVATE ShsGlobalIncludes) + target_include_directories(${TARGET_NAME} PRIVATE "${DEP_INC_ROOT}") + + # 1. 确定具体的 SDK 目录 (假设你的 SDK 按版本号平铺放置) + simple_link_cad_sdk(${TARGET_NAME}) + #[[if (DEFINED CACHE{ZWCAD}) + target_link_libraries(${TARGET_NAME} PRIVATE ThirdParty::ZRX) + else() + target_link_libraries(${TARGET_NAME} PRIVATE ThirdParty::ARX) + endif()]] + + target_link_libraries(${TARGET_NAME} PRIVATE "rpcrt4.lib") + + + # 4. 配置必须的宏定义和编译选项 + target_compile_definitions(${TARGET_NAME} PRIVATE + CMAKE + ARX=${SDK_VERSION} + ${_EXTENSION} # 指示这是一个 ARX 扩展 + ) +endfunction() + +# 定义函数：设置 Target 的输出名称和后缀 +function(target_set_name_and_suffix + target_name + new_name + new_suffix) + # 1. 检查目标是否存在，防止拼写错误导致静默失败 + if(NOT TARGET ${target_name}) + message(FATAL_ERROR "[ObjectARX-CMake] Target '${target_name}' 不存在！") + endif() + + # 2. 设置基础输出名称 (OUTPUT_NAME) + # 无论是 exe, dll, arx 还是 lib，OUTPUT_NAME 都会统一修改主输出文件的 Base Name + if(NOT "${new_name}" STREQUAL "") + set_target_properties(${target_name} PROPERTIES OUTPUT_NAME "${new_name}") + endif() + + # 3. 设置后缀 (SUFFIX) + if(NOT "${new_suffix}" STREQUAL "") + # 获取 Target 的类型 (EXECUTABLE, SHARED_LIBRARY, MODULE_LIBRARY, STATIC_LIBRARY 等) + get_target_property(target_type ${target_name} TYPE) + + # 如果是 ".arx" 那么判断一下是不是中望版本,如果是则自动变成".zrx" + if ("${new_suffix}" STREQUAL ".arx" AND IS_ZWCAD) + set(new_suffix ".zrx") + endif() + + # 设置主输出文件的后缀 + set_target_properties(${target_name} PROPERTIES SUFFIX "${new_suffix}") + + # 【核心细节】：针对动态库和导出符号的 EXE 进行导入库保护 + # 在 MSVC 中，构建 SHARED_LIBRARY (或开启 ENABLE_EXPORTS 的 EXE) 时， + # 会同时生成 主文件(如 .arx) 和 导入库(如 .lib)。 + # 修改 SUFFIX 虽然主要作用于主文件，但为了防止某些 CMake 版本的意外行为或全局变量污染， + # 显式将 IMPORT_SUFFIX 锁定为 ".lib" 是非常严谨的做法。 + if(target_type MATCHES "^(SHARED_LIBRARY|MODULE_LIBRARY|EXECUTABLE)$") + set_target_properties(${target_name} PROPERTIES + IMPORT_SUFFIX ".lib" + IMPORT_PREFIX "" + ) + endif() + + # 注：如果是 STATIC_LIBRARY，CMake 原生就使用 SUFFIX 属性来控制后缀， + # 传入 ".lib" 会完美适配，无需额外设置 IMPORT_SUFFIX。 + endif() +endfunction() + +# 为工程的debug模式,设置分发路径,把生成物copy到相应的插件目录下面 +function(set_debug_post_build + target_name # 工程名 + arx_name # 文件名 + ext # 后缀 +) + set(CONFIG_JSON "sh_output_path.json") + if (IS_ZWCAD) + set(CONFIG_JSON "zw_output_path.json") + endif() + + add_custom_command( + TARGET ${target_name} + POST_BUILD + # 核心：精准构造命令行参数 + COMMAND "$<$:${CMAKE_SOURCE_DIR}/copyarx.exe>" + "$<$:CMAKE>" + "$<$:$>" + "$<$:${GENERATE_DIR_TAG}>" + "$<$:${CMAKE_SOURCE_DIR}/${CONFIG_JSON}>" + COMMENT "正在调用 copyarx.exe 部署 ARX 模块..." + VERBATIM + ) +endfunction() + +function(add_custom_module_2 dir_path target_name folder_path) + # 1. 声明库 + add_subdirectory(${dir_path}) + + # 2. 设置 ARX 特有属性 + set_target_properties(${target_name} PROPERTIES + FOLDER "${folder_path}" # 动态传入分组路径 + ) +endfunction() + +function(add_custom_module dir_path folder_path) + get_filename_component(target_name "${dir_path}" NAME) + add_custom_module_2(${dir_path} ${target_name} ${folder_path}) +endfunction() + diff --git a/cmake/x64-windows-static-md.cmake b/cmake/x64-windows-static-md.cmake new file mode 100644 index 0000000..eaa8c3b --- /dev/null +++ b/cmake/x64-windows-static-md.cmake @@ -0,0 +1,3 @@ +set(VCPKG_TARGET_ARCHITECTURE x64) +set(VCPKG_CRT_LINKAGE dynamic) +set(VCPKG_LIBRARY_LINKAGE static) \ No newline at end of file diff --git a/cmakelists.txt b/cmakelists.txt new file mode 100644 index 0000000..a9b21ba --- /dev/null +++ b/cmakelists.txt @@ -0,0 +1,139 @@ +# 声明最低版本 (与你的 CMakePresets.json 保持一致) +cmake_minimum_required(VERSION 3.21) + +# CMP0091 策略最好放在最前面，确保全局生效 +cmake_policy(SET CMP0091 NEW) + +# 强制指定 Windows SDK 版本为 Win11 SDK +set(CMAKE_SYSTEM_VERSION "${WIN11_SDK}" CACHE STRING "Specify Windows SDK version" FORCE) + +# 定义工程大本营 +project(CADProject VERSION 1.0.0 LANGUAGES CXX) + +# 开启全局解决方案文件夹支持 +set_property(GLOBAL PROPERTY USE_FOLDERS ON) + +# 全局设定：强制所有配置使用 Release 版本的 CRT 运行库 (/MD) +set(CMAKE_MSVC_RUNTIME_LIBRARY "MultiThreadedDLL") + +# 将我们自定义的 cmake 文件夹加入模块搜索路径 +list(APPEND CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake") +include(functions) + +IsZWCAD(IS_ZWCAD) +# 如果时中望,取出版本号的后两位,作为宏定义 +get_sdk_version(SDK_VERSION) + +# ThirdPartyDeps里面使用了SDK_VERSION +include(ThirdPartyDeps) + + +# 对 CMake 生成的默认 +if(MSVC) + # 剔除 所有工程内的 _DEBUG 宏, 判断是否是 debug/release 模式时,使用 NDEBUG 来判断 + string(REGEX REPLACE "[/-]D_DEBUG" "" CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG}") + string(REGEX REPLACE "[/-]D_DEBUG" "" CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG}") + # 剔除 /RTC 相关的运行时检查参数 (如 /RTC1, /RTCs, /RTCu) + # 这一步是消除 __MSVC_RUNTIME_CHECKS 宏的关键 + string(REGEX REPLACE "[/-]RTC[a-zA-Z0-9]+" "" CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG}") + string(REGEX REPLACE "[/-]RTC[a-zA-Z0-9]+" "" CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG}") +endif() + +if (IS_ZWCAD) + if (CAD_SDK_VERSION GREATER 2021) + message(STATUS ">>> 检测到现代 ZRX SDK (${CAD_SDK_VERSION})，自动提权至 C++14 标准") + set(CMAKE_CXX_STANDARD 14) + endif() +else() + if(CAD_SDK_VERSION GREATER 25) + message(STATUS ">>> 检测到现代 ARX SDK (${CAD_SDK_VERSION})，自动提权至 C++20 标准") + set(CMAKE_CXX_STANDARD 20) + elseif (CAD_SDK_VERSION GREATER_EQUAL 20) + message(STATUS ">>> 检测到现代 ARX SDK (${CAD_SDK_VERSION})，自动提权至 C++14 标准") + set(CMAKE_CXX_STANDARD 14) + elseif (CAD_SDK_VERSION GREATER 19) + message(STATUS ">>> 检测到现代 ARX SDK (${CAD_SDK_VERSION})，自动提权至 C++03 标准") + set(CMAKE_CXX_STANDARD 03) + else() + message(STATUS ">>> 检测到传统 ARX SDK (${CAD_SDK_VERSION})，保持 C++98 标准") + set(CMAKE_CXX_STANDARD 98) + endif() +endif() + +set(CMAKE_CXX_STANDARD_REQUIRED ON) + +# 检查presets中是否定义了必要的变量 +# 把所有必须存在的变量名写成一个列表 (完美支持换行) +set(REQUIRED_VARS + CAD_SDK_ROOT + DEP_LIB_ROOT + DEP_INC_ROOT + CAD_SDK_VERSION) + +if (NOT IS_ZWCAD) + list(APPEND REQUIRED_VARS CAD_SDK_SUBVERSION) +endif() + +# 2. 遍历这个列表进行检查 +foreach(VAR_NAME IN LISTS REQUIRED_VARS) + # 注意这里使用了 ${VAR_NAME}，它会展开成上面的字符串，如 "CAD_SDK_VERSION" + if(NOT DEFINED ${VAR_NAME}) + message(FATAL_ERROR "【严重错误】缺少必要的配置变量: ${VAR_NAME}！请在 CMakePresets.json 中提供。") + endif() +endforeach() + +# 以下为所有工程都加入相应的宏 +if(MSVC) + # 🌟 开启 MSVC 多核并发编译！巨型工程提速的终极神器 + add_compile_options(/MP) + + # 🌟 统一设置全局 Unicode 宏 (ARX 和 MFC 都强烈需要) + add_compile_definitions( + UNICODE + _UNICODE + # release 模式下，统一设置 NDEBUG 宏 + $<$:NDEBUG> + # 关闭安全警告 + _CRT_SECURE_NO_WARNINGS + ) + + # 判断一下是不是中望cad + if (IS_ZWCAD) + message(STATUS ">>> 编译中望CAD版本") + # 加入 ZWCAD 宏,为代码标记中望版本 + add_compile_definitions(ZWCAD) + endif() + + # 使用for 循环内声明的变量作用域 + add_compile_options(/Zc:forScope-) + # 可选：关闭 MSVC 烦人的极度严格警告 (根据你的团队习惯开启/关闭) + add_compile_options(/wd4819 /wd4996) +endif() + +# ========================================== +# 第二部分：全局输出目录重定向 (精准路由) +# ========================================== + +# 用 CMake 内置命令把带 ../ 的路径“洗”成干净的绝对路径 +get_filename_component(GLOBAL_BIN_DIR "${GENERATE_BIN_DIR}" ABSOLUTE) +get_filename_component(GLOBAL_LIB_DIR "${GENERATE_LIB_DIR}" ABSOLUTE) + +# 生成形如 "R243", "R200" 的后缀,中望版本"Z2023","Z2024" + +if (IS_ZWCAD) + set(GENERATE_DIR_TAG "Z${CAD_SDK_VERSION}") +else() + set(GENERATE_DIR_TAG "R${CAD_SDK_VERSION}${CAD_SDK_SUBVERSION}") +endif() +message(STATUS ">>> 当前输出版本标签: ${GENERATE_DIR_TAG}") + +# 配置输出目录 +set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG "${GLOBAL_BIN_DIR}/Debug-${GENERATE_DIR_TAG}") +set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE "${GLOBAL_BIN_DIR}/Release-${GENERATE_DIR_TAG}") +set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY_DEBUG "${GLOBAL_LIB_DIR}/Debug-${GENERATE_DIR_TAG}") +set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY_RELEASE "${GLOBAL_LIB_DIR}/Release-${GENERATE_DIR_TAG}") + +message(STATUS ">>> 正在构建业务树...") + +add_subdirectory(./src/AutoAgent) + diff --git a/cmakepresets.json b/cmakepresets.json new file mode 100644 index 0000000..cb98595 --- /dev/null +++ b/cmakepresets.json @@ -0,0 +1,243 @@ +{ + "version": 10, + "cmakeMinimumRequired": { + "major": 3, + "minor": 21, + "patch": 0 + }, + "configurePresets": [ + { + "name": "base", + "hidden": true, + "$comment": " 各个子preset统一使用 vs2026，本地vs2026 已经安装好了需要使用的 Toolset", + "generator": "Visual Studio 18 2026", + "architecture": "x64", + "binaryDir": "${sourceDir}/out/${presetName}", + "cacheVariables": { + "VCPKG_INSTALLED_DIR": "${sourceDir}/out/vcpkg_shared_installed", + "CMAKE_TOOLCHAIN_FILE": "$env{VCPKG_ROOT}/scripts/buildsystems/vcpkg.cmake", + "VCPKG_TARGET_TRIPLET": "x64-windows-static-md", + "VCPKG_OVERLAY_TRIPLETS": "${sourceDir}/cmake", + "WIN11_SDK": "10.0.22621.0", + "DEP_LIB_ROOT": "${sourceDir}/dep_lib", + "DEP_INC_ROOT": "${sourceDir}/dep_inc", + "GENERATE_BIN_DIR": "${sourceDir}/bin", + "GENERATE_LIB_DIR": "${sourceDir}/lib" + } + }, + { + "name": "acad_base", + "hidden": true, + "inherits": "base", + "cacheVariables": { + "CAD_SDK_ROOT": "${sourceDir}/../new-start/envi-code/Arx" + } + }, + { + "name": "zwcad_base", + "hidden": true, + "inherits": "base", + "cacheVariables": { + "CAD_SDK_ROOT": "${sourceDir}/../new-start/envi-code/Zrx" + } + }, + { + "name": "R260", + "$comment": "ARX 26.0 vs2022 v143 CAD(2027)", + "inherits": "acad_base", + "toolset": "v143", + "cacheVariables": { + "CAD_SDK_VERSION": "26", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R250", + "$comment": "ARX 25.0 vs2022 v143 CAD(2025-2026)", + "inherits": "acad_base", + "toolset": "v143", + "cacheVariables": { + "CAD_SDK_VERSION": "25", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R243", + "$comment": "ARX 24.3 vs2022 v143 CAD(2024)", + "inherits": "acad_base", + "toolset": "v143", + "cacheVariables": { + "CAD_SDK_VERSION": "24", + "CAD_SDK_SUBVERSION": "3" + } + }, + { + "name": "R240", + "$comment": "ARX 24.0 vs2019 v142 CAD(2021-2023)", + "inherits": "acad_base", + "toolset": "v142", + "cacheVariables": { + "CAD_SDK_VERSION": "24", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R230", + "$comment": "ARX 23.0 vs2017 v141 CAD(2019-2020)", + "inherits": "acad_base", + "toolset": "v141", + "cacheVariables": { + "CAD_SDK_VERSION": "23", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R220", + "$comment": "ARX 22.0 vs2015 v140 CAD(2018)", + "inherits": "acad_base", + "toolset": "v140", + "cacheVariables": { + "CAD_SDK_VERSION": "22", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R210", + "$comment": "ARX 21.0 vs2015 v140 CAD(2017)", + "inherits": "acad_base", + "toolset": "v140", + "cacheVariables": { + "CAD_SDK_VERSION": "21", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R200", + "$comment": "ARX 20.0 vs2012 v110 CAD(2015-2016)", + "inherits": "acad_base", + "toolset": "v110", + "cacheVariables": { + "CAD_SDK_VERSION": "20", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R190", + "$comment": "ARX 19.0 vs2010 v100 CAD(2013-2014)", + "inherits": "acad_base", + "toolset": "v100", + "cacheVariables": { + "CAD_SDK_VERSION": "19", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "R180", + "$comment": "ARX 18.0 vs2008 v90 CAD(2010-2012)", + "inherits": "acad_base", + "toolset": "v90", + "cacheVariables": { + "CAD_SDK_VERSION": "18", + "CAD_SDK_SUBVERSION": "0" + } + }, + { + "name": "Z2026", + "$comment": "ZRX 2026 vs2017 v141 ZWCAD(2026)", + "inherits": "zwcad_base", + "toolset": "v141", + "cacheVariables": { + "CAD_SDK_VERSION": "2026", + "ZWCAD": "ZWCAD" + } + }, + { + "name": "Z2025", + "$comment": "ZRX 2025 vs2017 v141 ZWCAD(2025)", + "inherits": "zwcad_base", + "toolset": "v141", + "cacheVariables": { + "CAD_SDK_VERSION": "2025", + "ZWCAD": "ZWCAD" + } + }, + { + "name": "Z2024", + "$comment": "ZRX 2024 vs2017 v141 ZWCAD(2024)", + "inherits": "zwcad_base", + "toolset": "v141", + "cacheVariables": { + "CAD_SDK_VERSION": "2024", + "ZWCAD": "ZWCAD" + } + }, + { + "name": "Z2023", + "$comment": "ZRX 2023 vs2017 v141 ZWCAD(2023)", + "inherits": "zwcad_base", + "toolset": "v141", + "cacheVariables": { + "CAD_SDK_VERSION": "2023", + "ZWCAD": "ZWCAD" + } + } + ], + "buildPresets": [ + { + "name": "R260", + "configurePreset": "R260" + }, + { + "name": "R250", + "configurePreset": "R250" + }, + { + "name": "R243", + "configurePreset": "R243" + }, + { + "name": "R240", + "configurePreset": "R240" + }, + { + "name": "R230", + "configurePreset": "R230" + }, + { + "name": "R220", + "configurePreset": "R220" + }, + { + "name": "R210", + "configurePreset": "R210" + }, + { + "name": "R200", + "configurePreset": "R200" + }, + { + "name": "R190", + "configurePreset": "R190" + }, + { + "name": "R180", + "configurePreset": "R180" + }, + { + "name": "Z2026", + "configurePreset": "Z2026" + }, + { + "name": "Z2025", + "configurePreset": "Z2025" + }, + { + "name": "Z2024", + "configurePreset": "Z2024" + }, + { + "name": "Z2023", + "configurePreset": "Z2023" + } + ] +} \ No newline at end of file diff --git a/inc/cadsdk.h b/inc/cadsdk.h new file mode 100644 index 0000000..98e96aa --- /dev/null +++ b/inc/cadsdk.h @@ -0,0 +1,566 @@ +#pragma once + +// Description: +// AutoCAD ObjectARX开发包KTCadKernel，提供对ObjectARX的二次封装， +// 使的开发更加方便，使用时只要将本文件#include进stdafx.h文件中即可， +// 并且大部分的arx的头文件都不需要在别处包含了 +// Company: Kingtouch Software Corporation. Copyright 2002-2005 +// Author: WangYongguang +// Date: 2002.05.01 + +// 根据ObjectARX版本不同链接不同库文件 + +/* 郭建明 于 2017/04/09 修改 + + 从2010开始，vc++ 可以用切换 PlatformToolset 的方式编译低版本的二进制代码。 + 所以，不再需要在工程中自己为ADS宏定义版本（例如： ADS=19）, + 只需要 ADS=$(PlatformToolsetVersion) 即可自动赋值。 + 故 ADS 由以前的 ObjectARX 版本号，改为 VC++ PlatformToolset 号。 + 这样一来，只需要切换相应的 PlatformToolset 就可以编译各个CAD平台所使用的二进制文件。 + + PS： + ADS 宏 改为在 earthworm.props 文件内定义。 + + + 版本映射： + | vc platformtoolset | arx | vc平台 | cad | + | 80 | 17 | vc2005 | 2007-2009 | + | 90 | 18 | vc2008 | 2010-2012 | + | 100 | 19 | vc2010 | 2013-2014 | + | 110 | 20 | vc2012 | 2015-2016 | + | 140 | 21 | vc2015 | 2017 | R21 使用vc2015编译 + | 140 | 22 | vc2015 | 2018 | R22 使用vc2015编译 + | 141 | 23 | vc2017 | 2019-2020 | + | 142 | 24 | vc2019 | 2021-2023 | R24.0-R24.2 使用vc2019编译 + | 143 | 24.3| vc2022 | 2024 | R24.3使用vc2022编译 + | 143 | 25 | vc2022 | 2025-2026 | + | 143 | 26 | vc2022 | 2027- | +*/ + +#ifndef ZWCAD + +// 以前通过 toolset 来倒推 ARX,现在已经不行了. R24.3,R25,R26都使用 v143 编译 +// 所以,现在打包是使用 cmake 工具, ARX 直接从外部传入 +#ifdef CMAKE +// ARX 从 cmake传入,不再使用toolset倒推 +// 对 objectarx库文件的依赖再cmake中定义 +#else +#if ADS == 80 // VC++2005 +#define ARX 17 +#elif ADS == 90 // VC++2008 +#define ARX 18 +#elif ADS == 100 // VC++2010 +#define ARX 19 +#elif ADS == 110 // VC++2012 +#define ARX 20 +#elif ADS == 140 && !defined(R22) // VC++2015 +#define ARX 21 +#elif ADS == 140 && defined(R22) // VC++2015 +#define ARX 22 +#elif ADS == 141 // VC++2017 +#define ARX 23 +#elif ADS == 142 // VC++2019 +#define ARX 24 +#elif ADS == 143 // VC++2022 +#define ARX 25 + +// 注意,以下ARX不要再用此方式编译调试了,toolset已经不能倒推ARX了,所以,如果要编译R26,请使用 cmake, +// #elif ADS == 143 // VC++2022 +// #define ARX 26 +// #elif ADS == 143 // VC++2022 +// #define ARX 27 +#endif + +// 下面定义去要依赖的objectarx的库 +#if ARX == 17 +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acedapi.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "acdb17.lib") +#pragma comment(lib, "acge17.lib") +#pragma comment(lib, "acISMobj17.lib") +#pragma comment(lib, "aecmodeler50.lib") +#pragma comment(lib, "adui17.lib") +#pragma comment(lib, "acui17.lib") +#pragma comment(lib, "acgex17.lib") +#pragma comment(lib, "acbr17.lib") +#endif // arx 17 +#if ARX == 18 +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acedapi.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "acdb18.lib") +#pragma comment(lib, "acge18.lib") +#pragma comment(lib, "acISMobj18.lib") +#pragma comment(lib, "aecmodeler60.lib") +#pragma comment(lib, "adui18.lib") +#pragma comment(lib, "acui18.lib") +#pragma comment(lib, "acgex18.lib") +#pragma comment(lib, "acbr18.lib") +#endif // arx 18 + +#if ARX == 19 +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "accore.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "acdb19.lib") +#pragma comment(lib, "acge19.lib") +#pragma comment(lib, "acISMobj19.lib") +#pragma comment(lib, "aecmodeler.lib") +#pragma comment(lib, "adui19.lib") +#pragma comment(lib, "acui19.lib") +#pragma comment(lib, "ac1st19.lib") +#pragma comment(lib, "acgex19.lib") +#pragma comment(lib, "acbr19.lib") +#endif // arx 19 + +#if ARX == 20 +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "accore.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "acdb20.lib") +#pragma comment(lib, "acge20.lib") +#pragma comment(lib, "acISMobj20.lib") +#pragma comment(lib, "aecmodeler.lib") +#pragma comment(lib, "adui20.lib") +#pragma comment(lib, "acui20.lib") +#pragma comment(lib, "ac1st20.lib") +#pragma comment(lib, "acdrawbridge.lib") +#pragma comment(lib, "acgex20.lib") +#pragma comment(lib, "acbr20.lib") +#endif // arx 20 + +#if ARX == 21 +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "accore.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "acdb21.lib") +#pragma comment(lib, "acge21.lib") +#pragma comment(lib, "aecmodeler.lib") +#pragma comment(lib, "acISMobj21.lib") +#pragma comment(lib, "adui21.lib") +#pragma comment(lib, "acui21.lib") +#pragma comment(lib, "ac1st21.lib") +#pragma comment(lib, "acdrawbridge.lib") +#pragma comment(lib, "acgex21.lib") +#pragma comment(lib, "acbr21.lib") +#endif // arx 21 + +#if ARX == 22 +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "accore.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "acdb22.lib") +#pragma comment(lib, "acge22.lib") +#pragma comment(lib, "aecmodeler.lib") +#pragma comment(lib, "acISMobj22.lib") +#pragma comment(lib, "adui22.lib") +#pragma comment(lib, "acui22.lib") +#pragma comment(lib, "ac1st22.lib") +#pragma comment(lib, "acdrawbridge.lib") +#pragma comment(lib, "acgex22.lib") +#pragma comment(lib, "acbr22.lib") +#endif // arx 22 + +#if ARX == 23 +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "accore.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "acdb23.lib") +#pragma comment(lib, "acge23.lib") +#pragma comment(lib, "aecmodeler.lib") +#pragma comment(lib, "acISMobj23.lib") +#pragma comment(lib, "adui23.lib") +#pragma comment(lib, "acui23.lib") +#pragma comment(lib, "ac1st23.lib") +#pragma comment(lib, "acdrawbridge.lib") +#pragma comment(lib, "acgex23.lib") +#pragma comment(lib, "acbr23.lib") +#endif // arx 23 + +#if ARX == 24 +#pragma comment(lib, "acpal.lib") +#pragma comment(lib, "ac1st24.lib") +#pragma comment(lib, "acdb24.lib") +#pragma comment(lib, "acge24.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "acISMobj24.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "accore.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "aecmodeler.lib") +#pragma comment(lib, "adui24.lib") +#pragma comment(lib, "acui24.lib") +#pragma comment(lib, "acdrawbridge.lib") +#pragma comment(lib, "acgex24.lib") +#pragma comment(lib, "acbr24.lib") +#pragma comment(lib, "acgeoment.lib") +#endif // arx 24 + +#if ARX == 25 +#pragma comment(lib, "acpal.lib") +#pragma comment(lib, "ac1st25.lib") +#pragma comment(lib, "acdb25.lib") +#pragma comment(lib, "acge25.lib") +#pragma comment(lib, "acgiapi.lib") +#pragma comment(lib, "acISMobj25.lib") +#pragma comment(lib, "rxapi.lib") +#pragma comment(lib, "acad.lib") +#pragma comment(lib, "accore.lib") +#pragma comment(lib, "axdb.lib") +#pragma comment(lib, "aecmodeler.lib") +#pragma comment(lib, "adui25.lib") +#pragma comment(lib, "acui25.lib") +#pragma comment(lib, "acdrawbridge.lib") +#pragma comment(lib, "acgex25.lib") +#pragma comment(lib, "acbr25.lib") +#pragma comment(lib, "acgeoment.lib") +#endif // arx 25 + +#endif // !CMAKE + +#else // ZWCAD +#if ADS == 141 // VC++2017 +#if defined(R24) +#define ARX 24 +#pragma message("Automatically linking with ZRX 2024.") +#elif defined(R25) +#define ARX 25 +#pragma message("Automatically linking with ZRX 2025.") +#elif defined(R26) +#define ARX 26 +#pragma message("Automatically linking with ZRX 2026.") +#endif +#pragma comment(lib, "ZwBase.lib") +#pragma comment(lib, "ZWCAD.lib") +#pragma comment(lib, "ZwAuto.lib") +#pragma comment(lib, "ZwRx.lib") +#pragma comment(lib, "ZwZrx.lib") +#pragma comment(lib, "ZwGeometry.lib") +#pragma comment(lib, "ZwDatabase.lib") +#pragma comment(lib, "ZwDatabaseMgd.lib") +#pragma comment(lib, "ZwdUI.lib") +#pragma comment(lib, "ZwGs.lib") +#pragma comment(lib, "ZwTc.lib") +#pragma comment(lib, "ZwUI.lib") +#pragma comment(lib, "ZwBrep.lib") +#pragma comment(lib, "ZwAECModeler.lib") +#endif +#endif + +#if ARX > 18 +#include "acedads.h" +#include "adsmigr.h" +#endif + +#ifndef ZWCAD +#if ARX > 19 +#if defined(acedCommand) +#undef acedCommand +#endif +#define acedCommand Old_Function_Must_Switch_To_SHacedCommand + +#if defined(ads_command) +#undef ads_command +#endif +#define ads_command Old_Function_Must_Switch_To_SHads_command + +#if defined(acedCmd) +#undef acedCmd +#endif +#define acedCmd Old_Function_Must_Switch_To_SHacedCmd + +#define SHacedCommand(rtype, ...) acedCommandS((rtype), __VA_ARGS__) +#define SHacedCmd(rb) acedCmdS((rb)) +#define SHads_command SHacedCommand +#else +#define SHacedCommand(rtype, ...) acedCommand((rtype), __VA_ARGS__) +#define SHacedCmd(rb) acedCmd((rb)) +#define SHads_command SHacedCommand +#endif + +#else + +#if ARX > 19 +#define SHacedCommand(rtype, ...) acedCommand((rtype), __VA_ARGS__) +#define SHacedCmd(rb) acedCmdS((rb)) +#define SHads_command SHacedCommand +#else +#define SHacedCommand(rtype, ...) acedCommand((rtype), __VA_ARGS__) +#define SHacedCmd(rb) acedCmd((rb)) +#define SHads_command SHacedCommand +#endif + +extern void zrxPostCommand(wchar_t const *); + +#ifndef acrxEntryPoint +#define acrxEntryPoint zcrxEntryPoint +#endif + +#ifndef acedPostCommand +#define acedPostCommand zrxPostCommand +#endif + +#ifndef fromAcDbTextStyle +#define fromAcDbTextStyle fromZcDbTextStyle +#endif + +#ifndef ASMBodyCopy +#define ASMBodyCopy ZSMBodyCopy +#endif + +#ifndef getLockedASMBody +#define getLockedASMBody getLockedZSMBody +#endif + +#ifndef unlockASMBody +#define unlockASMBody unlockZSMBody +#endif + +#ifndef getLockedWritableASMBody +#define getLockedWritableASMBody getLockedWritableZSMBody +#endif + +#ifndef commitWritableASMBody +#define commitWritableASMBody commitWritableZSMBody +#endif + +#ifndef setASMBody +#define setASMBody setZSMBody +#endif + +#endif + +#if (ARX > 19) +#include "acedCmdNF.h" +#endif + +#pragma region INCLUDE +#include "accmd.h" +#include "acdb.h" +#include "acdbabb.h" +#include "aced.h" +#include "acedinpt.h" +#include "acestext.h" +#include "acgi.h" +#include "acgiutil.h" +#include "AcGsManager.h" +#include "acgs.h" +#include "gs.h" +#include "AcDbLMgr.h" +#include "actrans.h" +#include "adesk.h" +#include "adeskabb.h" +#include "ads.h" +#include "adscodes.h" +#include "adsdef.h" +#include "adsdlg.h" +#include "adslib.h" +#include "adsrxdef.h" +#include "appinfo.h" +#include "dbacis.h" +#include "dbapserv.h" +#include "dbaudita.h" +#include "dbbody.h" +#include "dbboiler.h" +#include "dbcfilrs.h" +#include "dbcurve.h" +#include "dbdate.h" +#include "dbdict.h" +#include "dbdictdflt.h" +#include "dbelipse.h" +#include "dbents.h" +#include "dbfcf.h" +#include "dbfiler.h" +#include "dbfilter.h" +#include "dbframe.h" +#include "dbgroup.h" +#include "dbhandle.h" +#include "dbhatch.h" +#include "dbid.h" +#include "dbidar.h" +#include "dbidmap.h" +#if ARX < 23 +#include "dbid_ops.h" +#endif +#include "dbimage.h" +#include "dbindex.h" +#include "dbintar.h" +#include "dbjig.h" +#include "dblayout.h" +#include "dblead.h" +#include "dbltrans.h" +#include "dblyfilt.h" +#include "dblyindx.h" +#include "dbmain.h" +#include "dbmline.h" +#include "dbmstyle.h" +#include "dbmtext.h" +#include "dbole.h" +#include "dbpl.h" +#include "dbplhldr.h" +#include "dbplotsettings.h" +#include "dbproxy.h" +#include "dbptrar.h" +#include "dbray.h" +#include "dbregion.h" +#include "dbsol3d.h" +#include "dbspline.h" +#include "dbspfilt.h" +#include "dbspindx.h" +#include "dbsubeid.h" +#include "dbsymtb.h" +#include "dbxline.h" +#include "dbxrecrd.h" +#include "dbxutil.h" +#include "summinfo.h" +#include "geapln3d.h" +#include "gearc2d.h" +#include "gearc3d.h" +#include "geassign.h" +#include "geblok2d.h" +#include "geblok3d.h" +#include "gebndpln.h" +#include "gecbndry.h" +#include "gecint2d.h" +#include "gecint3d.h" +#include "gecomp2d.h" +#include "gecomp3d.h" +#include "gecone.h" +#include "gecspl2d.h" +#include "gecspl3d.h" +#include "gecurv2d.h" +#include "gecurv3d.h" +#include "gecylndr.h" +#include "gedblar.h" +#include "gedll.h" +#include "gedwgio.h" +#include "gedxfio.h" +#include "geell2d.h" +#include "geell3d.h" +#include "geent2d.h" +#include "geent3d.h" +#include "geextc2d.h" +#include "geextc3d.h" +#include "geextsf.h" +#include "gefileio.h" +#include "gefiler.h" +#include "gegbl.h" +#include "gegblabb.h" +#include "geintarr.h" +#include "geintrvl.h" +#include "gekvec.h" +#include "gelent2d.h" +#include "gelent3d.h" +#include "gelibver.h" +#include "geline2d.h" +#include "geline3d.h" +#include "gelnsg2d.h" +#include "gelnsg3d.h" +#include "gemat2d.h" +#include "gemat3d.h" +#include "genurb2d.h" +#include "genurb3d.h" +#include "genurbsf.h" +#include "geoffc2d.h" +#include "geoffc3d.h" +#include "geoffsf.h" +#include "gepent2d.h" +#include "gepent3d.h" +#include "geplanar.h" +#include "geplane.h" +#include "geplin2d.h" +#include "geplin3d.h" +#include "gepnt2d.h" +#include "gepnt3d.h" +#include "geponc2d.h" +#include "geponc3d.h" +#include "geponsrf.h" +#include "gepos2d.h" +#include "gepos3d.h" +#include "gept2dar.h" +#include "gept3dar.h" +#include "geray2d.h" +#include "geray3d.h" +#include "gescl2d.h" +#include "gescl3d.h" +#include "gesent2d.h" +#include "gesent3d.h" +#include "gesphere.h" +#include "gesurf.h" +#include "getol.h" +#include "getorus.h" +#include "gevc2dar.h" +#include "gevc3dar.h" +#include "gevec2d.h" +#include "gevec3d.h" +#include "gevptar.h" +#include "gexbndsf.h" +#include "graph.h" +#include "imgdef.h" +#include "imgent.h" +#include "imgvars.h" +#include "lngtrans.h" +#include "migrtion.h" +#include "oleaprot.h" +#include "ol_errno.h" +#include "rxboiler.h" +#include "rxclass.h" +#include "rxdefs.h" +#include "rxdict.h" +#include "rxditer.h" +#include "rxdlinkr.h" +#include "rxiter.h" +#include "rxkernel.h" +#include "rxmfcapi.h" +#include "rxnames.h" +#include "rxobject.h" +#include "rxregsvc.h" +#include "rxsrvice.h" +#include "xgraph.h" +#include "adui.h" +#include "acui.h" +#include "acuiDialog.h" +#include +#include "amodeler.h" +#include "Point3d.h" +#include "axlock.h" +#include "dbsubd.h" +#include "dbobjptr.h" +#pragma endregion + +#ifndef ZWCAD +extern Adesk::Boolean acedPostCommand(const TCHAR *pszCmd); +#endif + +#include +// 为 vc2008 的 std::tr1::shared_ptr 注入std空间 +#if defined(_MSC_VER) && (_MSC_VER <= 1500) // VC2008 及更早版本 +namespace std +{ + using tr1::shared_ptr; + using tr1::weak_ptr; +} +#endif + +#ifdef min +#undef min +#endif +#ifdef max +#undef max +#endif diff --git a/preset.bat b/preset.bat new file mode 100644 index 0000000..10f8128 --- /dev/null +++ b/preset.bat @@ -0,0 +1,4 @@ +cmake --preset R190 +cmake --preset R230 +cmake --preset R220 +pause \ No newline at end of file diff --git a/src/.gitignore b/src/.gitignore new file mode 100644 index 0000000..1d81b02 --- /dev/null +++ b/src/.gitignore @@ -0,0 +1,87 @@ +# ===== Visual Studio / MSVC ===== +# 生成目录 +[Bb]in/ +[Oo]bj/ +[Dd]ebug/ +[Rr]elease/ +x64/ +x86/ +[Aa][Rr][Mm]/ +[Aa][Rr][Mm]64/ +build/ +out/ +[Bb]uild/ +[Ll]og/ +[Ll]ogs/ + +# Visual Studio 用户设置 +.vs/ +*.user +*.suo +*.userosscache +*.sln.docstates +*.VC.db +*.VC.VC.opendb +*.opendb +*.dbmdl +*.sdf +*.opensdf +*.cachefile +*.psess +*.vsp +*.vspx +*.log + +# Visual Studio Code +.vscode/ + +# ===== 编译产物 ===== +*.obj +*.o +*.lo +*.slo +*.pch +*.pdb +*.idb +*.ilk +*.exp +*.out +*.app +*.res +*.gch +*.ipch + +# 中间文件 +*.i +*.ii +*.s +*.asm +*.cod + +# ===== CMake ===== +CMakeCache.txt +CMakeFiles/ +cmake_install.cmake +CMakeUserPresets.json +install_manifest.txt + +# ===== 依赖 / 包管理 ===== +vcpkg_installed/ +packages/ +*.nupkg +*.snupkg +.nuget/ + +# ===== 其他 ===== +*.tmp +*.temp +*.bak +*.swp +*~ +.DS_Store +Thumbs.db +desktop.ini + +# 日志 +*.log +*.trace \ No newline at end of file diff --git a/src/AutoAgent/AutoAgent.cpp b/src/AutoAgent/AutoAgent.cpp new file mode 100644 index 0000000..e162389 --- /dev/null +++ b/src/AutoAgent/AutoAgent.cpp @@ -0,0 +1,77 @@ +#include "StdAfx.h" +#include "resource.h" +#include "cadsdk.h" + +HINSTANCE _hdllInstance = NULL ; + +#ifndef _ttof +#define _ttof(pszVal) _tcstod((pszVal), NULL) +#endif + +void AddCommand(const TCHAR* cmdGroup, const TCHAR* cmdInt, const TCHAR* cmdLoc, + const int cmdFlags, const AcRxFunctionPtr cmdProc, const int idLocal = -1); + +void InitApplication(); +void UnloadApplication(); + +AC_IMPLEMENT_EXTENSION_MODULE(EarthWormDLL); + +extern "C" BOOL WINAPI DllMain(HINSTANCE hInstance, DWORD dwReason, LPVOID /*lpReserved*/) +{ + if (dwReason == DLL_PROCESS_ATTACH) + { + _hdllInstance = hInstance; + EarthWormDLL.AttachInstance(hInstance); + } + else if (dwReason == DLL_PROCESS_DETACH) + { + EarthWormDLL.DetachInstance(); + } + return TRUE; +} + +extern "C" AcRx::AppRetCode acrxEntryPoint(AcRx::AppMsgCode msg, void* pkt) +{ + switch (msg) + { + case AcRx::kInitAppMsg: + acrxDynamicLinker->unlockApplication(pkt); + acrxDynamicLinker->registerAppMDIAware(pkt); + InitApplication(); + break; + case AcRx::kUnloadAppMsg: + UnloadApplication(); + break; + } + return AcRx::kRetOK; +} + +void CR_SCGXCmdFnc(); +void InitApplication() +{ + acrxBuildClassHierarchy(); + + AddCommand(_T("SHCRACKTOOLS"), _T("CR_SCGX"), _T("CR_SCGX"), ACRX_CMD_TRANSPARENT | ACRX_CMD_USEPICKSET, CR_SCGXCmdFnc); + +} + +void UnloadApplication() +{ + acedRegCmds->removeGroup(_T("SHCRACKTOOLS")); +} + +void AddCommand(const TCHAR* cmdGroup, const TCHAR* cmdInt, const TCHAR* cmdLoc, + const int cmdFlags, const AcRxFunctionPtr cmdProc, const int idLocal) +{ + TCHAR cmdLocRes[65]; + + if (idLocal != -1) + { + ::LoadString(_hdllInstance, idLocal, cmdLocRes, 64); + acedRegCmds->addCommand(cmdGroup, cmdInt, cmdLocRes, cmdFlags, cmdProc); + } + else + { + acedRegCmds->addCommand(cmdGroup, cmdInt, cmdLoc, cmdFlags, cmdProc); + } +} diff --git a/src/AutoAgent/AutoAgent.def b/src/AutoAgent/AutoAgent.def new file mode 100644 index 0000000..51cd555 --- /dev/null +++ b/src/AutoAgent/AutoAgent.def @@ -0,0 +1,7 @@ + +LIBRARY "AutoAgent.arx" + +EXPORTS + acrxEntryPoint PRIVATE + acrxGetApiVersion PRIVATE + diff --git a/src/AutoAgent/AutoAgent.rc b/src/AutoAgent/AutoAgent.rc new file mode 100644 index 0000000..24e70d8 --- /dev/null +++ b/src/AutoAgent/AutoAgent.rc @@ -0,0 +1,110 @@ +// Microsoft Visual C++ generated resource script. +// +#include "resource.h" + +#define APSTUDIO_READONLY_SYMBOLS +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 2 resource. +// +#include "afxres.h" + +///////////////////////////////////////////////////////////////////////////// +#undef APSTUDIO_READONLY_SYMBOLS + +///////////////////////////////////////////////////////////////////////////// +// Chinese (Simplified, PRC) resources + +#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_CHS) +LANGUAGE LANG_CHINESE, SUBLANG_CHINESE_SIMPLIFIED +#pragma code_page(936) + +#ifdef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// TEXTINCLUDE +// + +1 TEXTINCLUDE +BEGIN + "resource.h\0" +END + +2 TEXTINCLUDE +BEGIN + "#include ""afxres.h""\r\n" + "\0" +END + +3 TEXTINCLUDE +BEGIN + "#include ""res\\AutoAgent.rc2"" // non-Microsoft Visual C++ edited resources\r\n" + "\0" +END + +#endif // APSTUDIO_INVOKED + + +///////////////////////////////////////////////////////////////////////////// +// +// Version +// + +VS_VERSION_INFO VERSIONINFO + FILEVERSION 1,0,0,1 + PRODUCTVERSION 1,0,0,1 + FILEFLAGSMASK 0x3fL +#ifdef _DEBUG + FILEFLAGS 0x1L +#else + FILEFLAGS 0x0L +#endif + FILEOS 0x4L + FILETYPE 0x2L + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "FileDescription", "AutoAgent ObjectARX application" + VALUE "FileVersion", "1, 0, 0, 1" + VALUE "InternalName", "AutoAgent" + VALUE "LegalCopyright", "Copyright 2014" + VALUE "OriginalFilename", "AutoAgent.arx" + VALUE "ProductName", "AutoAgent Application" + VALUE "ProductVersion", "1, 0, 0, 1" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END + + +///////////////////////////////////////////////////////////////////////////// +// +// String Table +// + +STRINGTABLE +BEGIN + IDS_PROJNAME "AutoAgent" +END + +#endif // Chinese (Simplified, PRC) resources +///////////////////////////////////////////////////////////////////////////// + + + +#ifndef APSTUDIO_INVOKED +///////////////////////////////////////////////////////////////////////////// +// +// Generated from the TEXTINCLUDE 3 resource. +// +#include "res\AutoAgent.rc2" // non-Microsoft Visual C++ edited resources + +///////////////////////////////////////////////////////////////////////////// +#endif // not APSTUDIO_INVOKED + diff --git a/src/AutoAgent/StdAfx.cpp b/src/AutoAgent/StdAfx.cpp new file mode 100644 index 0000000..c232d35 --- /dev/null +++ b/src/AutoAgent/StdAfx.cpp @@ -0,0 +1,6 @@ +// StdAfx.cpp : source file that includes just the standard includes +// StdAfx.pch will be the pre-compiled header +// StdAfx.obj will contain the pre-compiled type information + +#include "StdAfx.h" + diff --git a/src/AutoAgent/StdAfx.h b/src/AutoAgent/StdAfx.h new file mode 100644 index 0000000..39a9247 --- /dev/null +++ b/src/AutoAgent/StdAfx.h @@ -0,0 +1,50 @@ +#pragma once + +#if _MSC_VER > 1000 +#pragma once +#endif // _MSC_VER > 1000 + +#define WINVER 0x0600 + +#pragma warning(disable: 4786) + +//- 'DEBUG workaround' below prevents the MFC or ATL #include-s from pulling +//- in "Afx.h" that would force the debug CRT through #pragma-s. +#if defined(_DEBUG) && !defined(AC_FULL_DEBUG) +#define _DEBUG_WAS_DEFINED +#undef _DEBUG +#pragma message ("Compiling MFC / STL / ATL header files in release mode.") +#endif + +#pragma pack (push, 8) +#pragma warning(disable: 4786 4996) + +#define VC_EXTRALEAN // Exclude rarely-used stuff from Windows headers + +#include // MFC core and standard components +#include // MFC extensions + +#ifndef _AFX_NO_OLE_SUPPORT +#include // MFC OLE classes +#include // MFC OLE dialog classes +#include // MFC Automation classes +#endif + +#include // MFC support for Internet Explorer 4 Common Controls +#ifndef _AFX_NO_AFXCMN_SUPPORT +#include // MFC support for Windows Common Controls +#endif + +#include +#include +#include +#include +#include + +extern HINSTANCE _hdllInstance; + +#ifdef _DEBUG_WAS_DEFINED +#define _DEBUG +#undef _DEBUG_WAS_DEFINED +#endif + diff --git a/src/AutoAgent/cmakelists.txt b/src/AutoAgent/cmakelists.txt new file mode 100644 index 0000000..139886e --- /dev/null +++ b/src/AutoAgent/cmakelists.txt @@ -0,0 +1,29 @@ +cmake_minimum_required(VERSION 3.16) + +project(AutoAgent) + +find_package(nlohmann_json CONFIG REQUIRED) +find_package(CURL CONFIG REQUIRED) + +set(SOURCES + "AutoAgent.cpp" + "command.cpp" + "stdafx.cpp" + "AutoAgent.rc" + ) +add_def_file_name(SOURCES "${PROJECT_NAME}") + +add_library(${PROJECT_NAME} SHARED ${SOURCES}) + +target_precompile_headers(${PROJECT_NAME} PRIVATE StdAfx.h) + +target_link_objectarx(${PROJECT_NAME} AECRXBASE_EXPORT) + +target_set_name_and_suffix(${PROJECT_NAME} "${PROJECT_NAME}" ".arx") + +target_compile_options(${PROJECT_NAME} PRIVATE /Zc:forScope) + +target_link_libraries(${PROJECT_NAME} PRIVATE + nlohmann_json::nlohmann_json + CURL::libcurl +) \ No newline at end of file diff --git a/src/AutoAgent/command.cpp b/src/AutoAgent/command.cpp new file mode 100644 index 0000000..9b445e6 --- /dev/null +++ b/src/AutoAgent/command.cpp @@ -0,0 +1,5 @@ +#include "StdAfx.h" + +void CR_SCGXCmdFnc() +{ +} diff --git a/src/AutoAgent/res/AutoAgent.rc2 b/src/AutoAgent/res/AutoAgent.rc2 new file mode 100644 index 0000000..cc86e14 --- /dev/null +++ b/src/AutoAgent/res/AutoAgent.rc2 @@ -0,0 +1,13 @@ +// +// AutoAgent.RC2 - resources Microsoft Visual C++ does not edit directly +// + +#ifdef APSTUDIO_INVOKED + #error this file is not editable by Microsoft Visual C++ +#endif //APSTUDIO_INVOKED + + +///////////////////////////////////////////////////////////////////////////// +// Add manually edited resources here... + +///////////////////////////////////////////////////////////////////////////// diff --git a/src/AutoAgent/resource.h b/src/AutoAgent/resource.h new file mode 100644 index 0000000..88a4c80 --- /dev/null +++ b/src/AutoAgent/resource.h @@ -0,0 +1,16 @@ +//{{NO_DEPENDENCIES}} +// Microsoft Visual C++ generated include file. +// Used by newProject.rc +// +#define IDS_PROJNAME 100 + +// Next default values for new objects +// +#ifdef APSTUDIO_INVOKED +#ifndef APSTUDIO_READONLY_SYMBOLS +#define _APS_NEXT_RESOURCE_VALUE 426 +#define _APS_NEXT_COMMAND_VALUE 32768 +#define _APS_NEXT_CONTROL_VALUE 438 +#define _APS_NEXT_SYMED_VALUE 122 +#endif +#endif diff --git a/vcpkg.json b/vcpkg.json new file mode 100644 index 0000000..864f124 --- /dev/null +++ b/vcpkg.json @@ -0,0 +1,9 @@ +{ + "name": "cad-ocr", + "version": "1.0.0", + "dependencies": [ + "nlohmann-json", + "curl" + ], + "builtin-baseline": "127402f1c75bb3d5ff6bce04b285faa4930a5aca" +} \ No newline at end of file