#include "stdafx.h"
#include "AecDbX3dPartEntity.h"
#include "dbgrip.h"
#include "AecGripCback.h"
#include "KTCADUtilityEx.h"
#include "MFCDbDwgFiler.h"
#include "AecDbX3dPart.h"
#include "KTTempTol.h"
#include "CoreTools.h"
#include "KTSetting.h"
#include "KTModelLayoutXData.h"
#include "AcGiExplodeDraw.h"
#include "AecDbSlab.h"
#include "AecDbXDrawPointer.h"

extern CString IDCreate();
extern double PixelToWcs(int nPixel);
extern BOOL Is2DView();
extern AcGeVector3d GetUcsZvt();
extern void PushGripMessage(GripMessage&msg);
extern AcDbPolyline* FormatPolyline(AcGePoint3d* ppPts,int nCount);
extern Acad::ErrorStatus AddToModelSpace(AcDbEntity* pEnt, AcDbDatabase* pDb = NULL, bool bClose = true);
extern void transfromRegion(AcDbRegion *pRegion, const AcGePoint3d &ptOnRegion, const AcGeVector3d &vtNormal, const AcGePoint3d &ptOnPlan);
extern void transfromCurve(AcDbCurve* pCurve,const AcGePoint3d& ptOnRegion,const AcGeVector3d &vtNormal,const AcGePoint3d &ptOnPlan);
extern void transfromPoint(AcGePoint3d& ptOn,const AcGeVector3d &vtNormal,const AcGePoint3d &ptOnPlan);
extern void DLLIMPEXP OrthoProjected3DSolid2(AcDb3dSolid* pSolidClone,const AcGePlane& plan,const AcGePlane& planCut,AcGeMatrix3d& xformPlanToWorld,AcDbVoidPtrArray& arEntPtrs);
extern void DLLIMPEXP OrthoProjected3DSolid(AcDb3dSolid* pSolidClone,const AcGePlane& plan,AcGeMatrix3d& xformPlanToWorld,AcDbVoidPtrArray& arEntPtrs);
extern AcGePoint3d MidPoint(const AcGePoint3d& pt1,const AcGePoint3d& pt2);
extern BOOL DLLIMPEXP GetDimGripOff();
extern void RegionHatch(AcDbRegion* pRegionT,AcDbVoidPtrArray& arHatchPtrs,LPCTSTR pszPattern);
extern void FillSolid(AcGePoint3d *pptGe, int nCount, AcDbVoidPtrArray &arHatchPtrs);
extern DLLIMPEXP void PolylineHatch(AcDbPolyline *pPl, AcDbVoidPtrArray &arHatchPtrs, LPCTSTR pszPattern, const AcGeVector3d &vtZ);

static const Adesk::UInt16 kColorByBlock   = 0;
static const Adesk::UInt16 kRed            = 1;
static const Adesk::UInt16 kYellow         = 2;
static const Adesk::UInt16 kGreen          = 3;
static const Adesk::UInt16 kCyan           = 4;
static const Adesk::UInt16 kBlue           = 5;
static const Adesk::UInt16 kMagenta        = 6;
static const Adesk::UInt16 kWhite          = 7;
static const Adesk::UInt16 kColorByLayer   = 256;

#define HATCH_LOOP 123

Adesk::UInt32 AecDbX3dPartEntity::kCurrentVersionNumber = 2;

ACRX_DXF_DEFINE_MEMBERS (AecDbX3dPartEntity, AecDbEntityBase,
						 AcDb::kDHL_CURRENT, AcDb::kMReleaseCurrent, 
						 AcDbProxyEntity::kNoOperation | AcDbProxyEntity::kDisableProxyWarning, 
						 AEC_X3DPART,
						 "AecDbX3dPartEntity"
						 "|Product Desc:     shanghua earthworm app obj"
						 "|Company:          shanghua inc"
						 "|WEB Address:      www.shanghuasoft.com")

AecDbX3dPartEntity::AecDbX3dPartEntity(void)
{
	m_pPart = new AecDbX3dPart;
	m_pGripAppData = new AecGripData[GRIP_MAXNUM];
	GetSpecialtyData()->SetAt(KEY_HIDENO,TRUE);
}

AecDbX3dPartEntity::~AecDbX3dPartEntity(void)
{
	delete [] m_pGripAppData;
	delete m_pPart;
}

void AecDbX3dPartEntity::AddX3dSolid(AcDbX3dSolid* pXSolid,AcDb::BoolOperType bType/* = AcDb::kBoolUnite*/,bool bSubtractForOwner /*= false*/)
{
	AssertWriteEnabled();

	if (bSubtractForOwner)
	{
		m_pPart->AddX3dSolid(pXSolid,bType,true);
	}
	else
	{
		m_pPart->AddX3dSolid(pXSolid,bType);
	}
}

void AecDbX3dPartEntity::RemoveAt(int nIndex,AcDb::BoolOperType bType/* = AcDb::kBoolUnite*/,bool bSubtractForOwner /* = false*/)
{
	AssertWriteEnabled();
	if (bSubtractForOwner)
	{
		if (nIndex > -1 && nIndex < m_pPart->GetX3dSolidCount(AcDb::kBoolUnite,true))
		{
			m_pPart->RemoveAt(nIndex,bType,true);
		}
	}
	else
	{
		if (nIndex > -1 && nIndex < m_pPart->GetX3dSolidCount())
		{
			m_pPart->RemoveAt(nIndex,bType);
		}
	}
}

void AecDbX3dPartEntity::RemoveAll3dSolidRec()
{
	AssertWriteEnabled();
	m_pPart->RemoveAll3dSolidRec();
}

int  AecDbX3dPartEntity::GetX3dSolidCount(AcDb::BoolOperType bType /*= AcDb::kBoolUnite*/,bool bSubtractForOwner/* = false*/) const
{
	assertReadEnabled();

	if (bSubtractForOwner)
	{
		return m_pPart->GetX3dSolidCount(bType,true);
	}
	return m_pPart->GetX3dSolidCount(bType);
}

bool AecDbX3dPartEntity::Create()
{
	AssertWriteEnabled();

	if (m_pPart != NULL)
	{
		return m_pPart->Create();
	}
	return false;
}

void AecDbX3dPartEntity::SetName(LPCTSTR pszName)
{
	assertWriteEnabled();
	if (m_pPart != NULL)
	{
		m_pPart->SetName(pszName);
	}
}

CString AecDbX3dPartEntity::GetName() const
{
	assertReadEnabled();
	CString sName;
	if (m_pPart != NULL)
	{
		m_pPart->GetName(sName);
	}
	return sName;
}

LPCTSTR AecDbX3dPartEntity::GetGUID() const
{
	assertReadEnabled();
	if (m_pPart != NULL)
	{
		return m_pPart->GetGUID();
	}
	return NULL;
}

AcDbX3dSolid* AecDbX3dPartEntity::GetX3dSolid(int nIndex,AcDb::BoolOperType bType /*= AcDb::kBoolUnite*/,bool bSubtractForOwner/* = false */) const
{
	assertReadEnabled();

	if (bSubtractForOwner)
	{
		if (nIndex > -1 && nIndex < m_pPart->GetX3dSolidCount(bType,true))
		{
			return m_pPart->GetX3dSolid(nIndex,bType);
		}
	}
	else
	{
		if (nIndex > -1 && nIndex < m_pPart->GetX3dSolidCount(bType))
		{
			return m_pPart->GetX3dSolid(nIndex,bType);
		}
	}
	return NULL;
}

void AecDbX3dPartEntity::SetOrgPoint(const AcGePoint3d& ptOrg)
{
	AssertWriteEnabled();
	m_pPart->SetOrgPoint(ptOrg);
}

AcGePoint3d AecDbX3dPartEntity::GetOrgPoint(bool bGetTrans/* = false*/) const
{
	assertReadEnabled();
	return m_pPart->GetOrgPoint(bGetTrans);
}

void AecDbX3dPartEntity::AddMove(const AcGeVector3d& vtMove)
{
	AssertWriteEnabled();
	m_pPart->AddMove(vtMove);

	AcGePoint3d ptPos;
	if ( m_pPart->GetSpecialtyData()->GetAt(KEY_NOPOS,ptPos) )
	{
		ptPos += vtMove;
		m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptPos);
	}
}

AcGeVector3d AecDbX3dPartEntity::GetMove() const
{
	assertReadEnabled();
	return m_pPart->GetMove();
}

void AecDbX3dPartEntity::ResetMove()
{
	AssertWriteEnabled();
	m_pPart->ResetMove();
}

void AecDbX3dPartEntity::AddRotate(int nAxis,double dRotateBy)
{
	AssertWriteEnabled();
	m_pPart->AddRotate(nAxis,dRotateBy);
}

double AecDbX3dPartEntity::GetRotate(int nAxis) const
{
	assertReadEnabled();
	return m_pPart->GetRotate(nAxis);
}

void AecDbX3dPartEntity::ResetRotation(int nAxis)
{
	AssertWriteEnabled();
	m_pPart->ResetRotate(nAxis);
}

AcDb3dSolid* AecDbX3dPartEntity::CreateDraw3dSolid() const
{
	assertReadEnabled();
	return m_pPart->CreateDraw3dSolid();
}

bool AecDbX3dPartEntity::GetForHouseSubtract(AcDbVoidPtrArray& arSolidPtrs) const
{
	assertReadEnabled();
	m_pPart->GetForHouseSubtract(arSolidPtrs);
	return true;
}

AecDbObjXDataMap* AecDbX3dPartEntity::GetSpecialtyData(AcDb::OpenMode bMode /*= AcDb::kForWrite*/)
{
	if (bMode == AcDb::kForWrite)
	{
		if (!isWriteEnabled())
		{
			upgradeOpen();
		}
		assertWriteEnabled();
	}
	else
	{
		assertReadEnabled();
	}
	return m_pPart->GetSpecialtyData();
}

const AecDbObjXDataMap * AecDbX3dPartEntity::GetSpecialtyData() const
{
	assertReadEnabled();
	return m_pPart->GetSpecialtyData();
}

Acad::ErrorStatus AecDbX3dPartEntity::subExplode(AcDbVoidPtrArray& entitySet) const
{
	assertReadEnabled();

	AcDb3dSolid* pSolid = CreateDraw3dSolid();
	if (pSolid != NULL)
	{
		entitySet.append(pSolid);
	}
	return Acad::eOk;
}

void AecDbX3dPartEntity::subList() const
{
	assertReadEnabled();
	AecDbEntityBase::subList();
	acutPrintf(_T("\n装配式簇"));
	m_pPart->List();
	acutPrintf(_T("\n体积:立方"),GetVolume() / 1.e9);
}

bool AecDbX3dPartEntity::GetBimInfoTip(CString& sInfoTip) const
{
	assertReadEnabled();

	CString sField,sFmt;
	CString sName = GetName();
	CString sVal;

	double dVal = 0.0;
	if ( sName.CompareNoCase(_T("开洞")) == 0)
	{
		int nShpae = 0;
		GetSpecialtyData()->GetAt(_T("nShape"),nShpae);//方

		if (nShpae == eRect)
		{
			sField = _T("矩形洞口\n");
			sInfoTip += sField;

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("m_dL"),dVal);
			MAKEFIELD(_T("长度"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("m_dW"),dVal);
			MAKEFIELD(_T("宽度"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("m_dT"),dVal);
			MAKEFIELD(_T("洞深"),_T("%.2f"),dVal,sInfoTip);
		}
		else if(nShpae == eCircle)
		{
			sField = _T("圆形洞口\n");
			sInfoTip += sField;

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("m_dL"),dVal);
			MAKEFIELD(_T("直径"),_T("%.2f"),2.0 * dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("m_dT"),dVal);
			MAKEFIELD(_T("洞深"),_T("%.2f"),dVal,sInfoTip);
		}
		else
		{
			sField = _T("异形洞口\n");
			sInfoTip += sField;

			sVal = _T("");
			GetSpecialtyData()->GetAt(_T("Points"),sVal);
			MAKEFIELD(_T("定义"),_T("%s"),sVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("洞深"),_T("%.2f"),dVal,sInfoTip);
		}

		
		MAKEFIELD(_T("洞底标高"),_T("%.2f"),dVal,sInfoTip);

		sVal = _T("");
		GetSpecialtyData()->GetAt(KEY_NO,sVal);
		MAKEFIELD(_T("编号"),_T("%s"),sVal,sInfoTip);
	}
	else if( sName.CompareNoCase(_T("套管")) == 0)
	{
		int nShpae = 0;
		GetSpecialtyData()->GetAt(_T("nShape"), nShpae);//方

		if (nShpae == eCircle)
		{
			sField = _T("圆形套管\n");
			sInfoTip += sField;

			CString sPipeType;
			GetSpecialtyData()->GetAt(KEY_PIPETYPE, sPipeType);
			MAKEFIELD(_T("套管类型"), _T("%s"), sPipeType, sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("嵌入长度"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dD"),dVal);
			MAKEFIELD(_T("直径"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dT"),dVal);
			MAKEFIELD(_T("壁厚"),_T("%.2f"),dVal,sInfoTip);

			BOOL bExt = 0;
			GetSpecialtyData()->GetAt(_T("bExt"),bExt);
			if (bExt)
			{
				dVal = 0;
				GetSpecialtyData()->GetAt(_T("dEx1"),dVal);
				MAKEFIELD(_T("延申长度1"),_T("%.2f"),dVal,sInfoTip);

				dVal = 0;
				GetSpecialtyData()->GetAt(_T("dEx2"),dVal);
				MAKEFIELD(_T("延申长度2"),_T("%.2f"),dVal,sInfoTip);
			}

			CString sTOD;
			if (GetSpecialtyData()->GetAt(PIPE_TOD,sTOD) )
			{
				MAKEFIELD(_T("套管翼环外径"), _T("%s"), sTOD, sInfoTip);
			}
			int nD2 = 0;
			if (GetSpecialtyData()->GetAt(PIPE_YMS, nD2))
			{
				MAKEFIELD(_T("套管翼环数量"), _T("%d"), nD2, sInfoTip);
			}
		}
		else if(nShpae == eRect)
		{
			sField = _T("矩形套管\n");
			sInfoTip += sField;

			CString sPipeType;
			GetSpecialtyData()->GetAt(KEY_PIPETYPE, sPipeType);
			MAKEFIELD(_T("套管类型"), _T("%s"), sPipeType, sInfoTip);

			dVal = 0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("套管截面长"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0;
			GetSpecialtyData()->GetAt(_T("dL"),dVal);
			MAKEFIELD(_T("套管截面宽"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dT"),dVal);
			MAKEFIELD(_T("壁厚"),_T("%.2f"),dVal,sInfoTip);

			BOOL bExt = 0;
			GetSpecialtyData()->GetAt(_T("bExt"),bExt);
			if (bExt)
			{
				dVal = 0;
				GetSpecialtyData()->GetAt(_T("dEx1"),dVal);
				MAKEFIELD(_T("延申长度1"),_T("%.2f"),dVal,sInfoTip);

				dVal = 0;
				GetSpecialtyData()->GetAt(_T("dEx2"),dVal);
				MAKEFIELD(_T("延申长度2"),_T("%.2f"),dVal,sInfoTip);
			}
		}
		else
		{
			sField = _T("异形套管管\n");
			sInfoTip += sField;
		}

		CString sTOD;
		if (GetSpecialtyData()->GetAt(PIPE_TOD, sTOD))
		{
			MAKEFIELD(_T("套管翼环外径"), _T("%s"), sTOD, sInfoTip);
		}
		int nD2 = 0;
		if (GetSpecialtyData()->GetAt(PIPE_YMS, nD2))
		{
			MAKEFIELD(_T("套管翼环数量"), _T("%d"), nD2, sInfoTip);
		}

		sVal = _T("");
		GetSpecialtyData()->GetAt(KEY_MATERIAL,sVal);
		MAKEFIELD(_T("材质"),_T("%s"),sVal,sInfoTip);

		sVal = _T("");
		GetSpecialtyData()->GetAt(KEY_PIPETYPE,sVal);
		MAKEFIELD(_T("类型"),_T("%s"),sVal,sInfoTip);

		sVal = _T("");
		GetSpecialtyData()->GetAt(KEY_NO,sVal);
		MAKEFIELD(_T("编号"),_T("%s"),sVal,sInfoTip);
	}
	else if ( sName.Find(_T("井")) != -1)
	{
		if (sName.CompareNoCase(_T("方台井")) == 0)
		{
			sField = _T("方台井\n");
			sInfoTip += sField;

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dL"),dVal);
			MAKEFIELD(_T("进口长"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dW"),dVal);
			MAKEFIELD(_T("进口宽"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("井深"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dL1"),dVal);
			MAKEFIELD(_T("出口长"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dW1"),dVal);
			MAKEFIELD(_T("出口宽"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dt"),dVal);
			MAKEFIELD(_T("井侧壁厚"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dBomt"),dVal);
			MAKEFIELD(_T("井底壁厚"),_T("%.2f"),dVal,sInfoTip);
		}
		else if(sName.CompareNoCase(_T("方圆井")) == 0)
		{
			sField = _T("方圆井\n");
			sInfoTip += sField;

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dL"),dVal);
			MAKEFIELD(_T("进口长"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dW"),dVal);
			MAKEFIELD(_T("进口宽"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dr"),dVal);
			MAKEFIELD(_T("出口直径"),_T("%.2f"),2.0 * dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("井深"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dt"),dVal);
			MAKEFIELD(_T("井侧壁厚"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dBomt"),dVal);
			MAKEFIELD(_T("井底壁厚"),_T("%.2f"),dVal,sInfoTip);
		}
		else if(sName.CompareNoCase(_T("集水坑井")) == 0)
		{
			sField = _T("集水坑井\n");
			sInfoTip += sField;

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dL"),dVal);
			MAKEFIELD(_T("进口长"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dW"),dVal);
			MAKEFIELD(_T("进口宽"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("井深"),_T("%.2f"),dVal,sInfoTip);

			double dBomThick = 0.0,dT = 0.0;
			if (GetSpecialtyData()->GetAt(_T("dSlabThick"),dBomThick))
			{
				GetSpecialtyData()->GetAt(_T("dBomThick"),dT);
			}
			else
			{
				GetSpecialtyData()->GetAt(_T("dBomThick"),dBomThick);
				GetSpecialtyData()->GetAt(_T("dBomThick"),dT);
			}
			MAKEFIELD(_T("底部壁厚"),_T("%.2f"),dT,sInfoTip);

			dVal = 0.0;
			if ( GetSpecialtyData()->GetAt(_T("Ang"),dVal) )
			{
				dVal *= 180.0 / PI;
			}
			MAKEFIELD(_T("加强斜角"),_T("%.2f 度"),dVal,sInfoTip);
		}
		else if (sName.CompareNoCase(_T("圆台井")) == 0)
		{
			sField = _T("圆台井\n");
			sInfoTip += sField;

			dVal = 0;
			GetSpecialtyData()->GetAt(_T("dR"),dVal);
			MAKEFIELD(_T("进口直径"),_T("%.2f"),2.0 * dVal,sInfoTip);

			dVal = 0;
			GetSpecialtyData()->GetAt(_T("dr"),dVal);
			MAKEFIELD(_T("出口直径"),_T("%.2f"),2.0 * dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("井深"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dt"),dVal);
			MAKEFIELD(_T("井侧壁厚"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dBomt"),dVal);
			if (dVal < 1.e-2)
				GetSpecialtyData()->GetAt(_T("dt"),dVal);
			MAKEFIELD(_T("井底壁厚"),_T("%.2f"),dVal,sInfoTip);
		}
		else if (sName.CompareNoCase(_T("异形偏心井")) == 0)
		{
			sField = _T("异形偏心井\n");
			sInfoTip += sField;

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dH"),dVal);
			MAKEFIELD(_T("井深"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dThick"),dVal);
			MAKEFIELD(_T("井侧壁厚"),_T("%.2f"),dVal,sInfoTip);

			dVal = 0.0;
			GetSpecialtyData()->GetAt(_T("dBomThick"),dVal);
			MAKEFIELD(_T("底部壁厚"),_T("%.2f"),dVal,sInfoTip);
		}

		sVal = _T("");
		GetSpecialtyData()->GetAt(KEY_REM,sVal);
		MAKEFIELD(_T("用途"),_T("%s"),sVal,sInfoTip);

		sVal = _T("");
		GetSpecialtyData()->GetAt(KEY_NO,sVal);
		MAKEFIELD(_T("编号"),_T("%s"),sVal,sInfoTip);
	}
	else
	{
		sField = _T("装配式簇\n");
		sInfoTip += sField;

		MAKEFIELD(_T("体积"),_T("%.6f 立方"),GetVolume() / 1.e9,sInfoTip);
	}
	return true;
}

Acad::ErrorStatus AecDbX3dPartEntity::copyFrom(const AcRxObject* pSrc)
{
	AssertWriteEnabled();
	if (pSrc != NULL)
	{
		AecDbX3dPartEntity* pPartSrc = AecDbX3dPartEntity::cast(pSrc);
		if (pPartSrc != NULL)
		{
			AssertWriteEnabled();
			m_pPart->CopyFrom(pPartSrc->m_pPart);

			//m_pPart->ResetMove();
			//m_pPart->ResetRotate(X);
			//m_pPart->ResetRotate(Y);
			//m_pPart->ResetRotate(Z);

			m_drawable2d.copyFrom(pPartSrc->m_drawable2d);

			AcDbObjectId idBasin;
			GetAt(KEY_ASSOIC, idBasin);
			addPersistentReactor(idBasin);
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::subDeepClone( AcDbObject *pOwnerObject,
													AcDbObject *&pClonedObject,
													AcDbIdMapping &idMap,
													Adesk::Boolean isPrimary /*= Adesk::kTrue*/) const
{
	// 如果已经克隆过了，就直接返回，避免重复克隆
	AcDbIdPair idPairOpening(id(), AcDbObjectId::kNull, false, isPrimary ? true : false);
	if (idMap.compute(idPairOpening))
		return Acad::eOk;

	Acad::ErrorStatus es = AecDbEntityBase::subDeepClone(pOwnerObject, pClonedObject, idMap, isPrimary);

	//AcDbObjectId idBasin;
	//GetAt(KEY_ASSOIC, idBasin);

	//AcDbEntity *pEnt = NULL;
	//if (Acad::eOk == acdbOpenAcDbEntity(pEnt, idBasin, AcDb::kForWrite))
	//{
	//	AecDbXSlab *pBasin = AecDbXSlab::cast(pEnt);
	//	if (pBasin != NULL)
	//	{
	//		if (pClonedObject)
	//			pBasin->AppendAssocPart(pClonedObject->objectId());
	//	}
	//	pEnt->close();
	//}

	// 与洞口的关联关系再板实体中建立

	if (!pClonedObject) return es;

	AecDbX3dPartEntity *pOpening = AecDbX3dPartEntity::cast(pClonedObject);
	if (pOpening)
		pOpening->SetAt(KEY_ASSOIC, AcDbObjectId::kNull);
	return es;
}

Acad::ErrorStatus AecDbX3dPartEntity::subTransformBy(const AcGeMatrix3d& xform)
{
	AssertWriteEnabled();
	
	//再分解移动,目前只支持X,Y 镜像
	AcGePoint3d pt = GetOrgPoint(true);
	AcGePoint3d pt2 = pt;
	pt2.transformBy(xform);

	AcGeVector3d vtMove = pt2 - pt;
	AddMove(vtMove);

	m_drawable2d.transformBy(xform);

	//确认变换后
	//更新三维,发自 AecDbX3dPartEntity 变动消息
	if (objectId().isValid())
	{
		AcDbObjectId idHost;
		m_pPart->GetSpecialtyData()->GetAt(KEY_ASSOIC,idHost);

		//reset
		GripMessage msg;
		memset(&msg,0,sizeof(GripMessage));
		msg.nSegindex = -1;
		msg.nType = -1;
		msg.pParam = 0;
		msg.nData = -1;
		_tcscpy(msg.szLockId, _T("0"));//锁定id,如果有
		msg.fData = 0;
		msg.nSegindex = 0;
		msg.nSubSegIndex = 0;
		msg.vtOffset.set(0,0,0);
		msg.ptGrip.set(0,0,0);

		//发送调整通知命令
		msg.nType = eAdjust0;
		msg.nData = 0;
		msg.ptGrip.set(0,0,0);
		msg.idHost = objectId();
		msg.vtOffset = vtMove;

		Create();

		if (idHost.isValid())
		{
			PushGripMessage(msg);
		}

		//补充来自管道夹点的动作
		AssocReCreateDraw();
	}

	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::subGetTransformedCopy(const AcGeMatrix3d& xform,AcDbEntity*& ent) const
{
	assertReadEnabled();
	AcDbEntity *pCloned = (AcDbEntity *)clone();

	AecDbX3dPartEntity* pXPart = AecDbX3dPartEntity::cast(pCloned);
	if (pXPart != NULL)
	{
		pXPart->ResetMove();
		pXPart->ResetRotation(X);
		pXPart->ResetRotation(Y);
		pXPart->ResetRotation(Z);
	}

	Acad::ErrorStatus es = pCloned->transformBy(xform);
	if(es == Acad::eOk)
		ent = pCloned;
	else
		DELETE_PTR(pCloned);
	return es;
}

#if ARX>16	
Acad::ErrorStatus AecDbX3dPartEntity::subGetGripPoints( AcDbGripDataPtrArray& grips,
													   const double curViewUnitSize,
													   const int gripSize,
													   const AcGeVector3d& curViewDir,
													   const int bitflags) const
{
	assertReadEnabled();

	AcGePoint3d pt = m_pPart->GetOrgPoint(true);

	CString sName;
	m_pPart->GetName(sName);

	AcDbGripData* pGripData = new AcDbGripData;

	// 位置 0
	int i = 0;
	memset(&m_pGripAppData[i],0,sizeof(AecGripData));
	m_pGripAppData[i].nIndex = i;
	m_pGripAppData[i].ePos = eMid;
	m_pGripAppData[i].ptGrip = pt;
	m_pGripAppData[i].nColor = kBlue;
	_tcscpy(m_pGripAppData[i].szTip,_T("位置夹点"));
	_tcscpy(m_pGripAppData[i].szID,m_pPart->GetGUID());
	m_pGripAppData[i].pOwner = (AcDbEntity*)this;
	m_pGripAppData[i].idHost = objectId();
	pGripData->setGripPoint(pt);
	pGripData->setAppData((void*)&m_pGripAppData[i]);
	pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
	pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
	grips.append(pGripData);

	//洞口消息 1
	i += 1;
	if (sName.CompareNoCase(_T("套管")) == 0 ||
		sName.CompareNoCase(_T("开洞")) == 0)
	{
		double dCmd = PixelToWcs(20);

		pt.x += dCmd;
		pt.y += dCmd;

		pGripData = new AcDbGripData;
		memset(&m_pGripAppData[i],0,sizeof(AecGripData));
		m_pGripAppData[i].nIndex = i;
		m_pGripAppData[i].ePos = eCommand0;
		m_pGripAppData[i].ptGrip = pt;
		_tcscpy(m_pGripAppData[i].szTip,_T("拉管夹点"));
		_tcscpy(m_pGripAppData[i].szID,m_pPart->GetGUID());
		m_pGripAppData[i].pOwner = (AcDbEntity*)this;
		m_pGripAppData[i].idHost = objectId();
		pGripData->setGripPoint(pt);
		pGripData->setAppData((void*)&m_pGripAppData[i]);
		pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
		pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
		grips.append(pGripData);

		//洞口编号 2
		i+= 1;
		AcGePoint3d ptPos;
		if (!m_pPart->GetSpecialtyData()->GetAt(KEY_NOPOS,ptPos))
		{
			ptPos = GetOrgPoint();
		}
		ptPos.x -= dCmd;
		ptPos.y -= dCmd;

		pGripData = new AcDbGripData;
		memset(&m_pGripAppData[i],0,sizeof(AecGripData));
		m_pGripAppData[i].nIndex = i;
		m_pGripAppData[i].ePos = eEnd;
		m_pGripAppData[i].ptGrip = ptPos;
		m_pGripAppData[i].nColor = kBlue;
		_tcscpy(m_pGripAppData[i].szTip,_T("编号夹点"));
		_tcscpy(m_pGripAppData[i].szID,m_pPart->GetGUID());
		m_pGripAppData[i].pOwner = (AcDbEntity*)this;
		m_pGripAppData[i].idHost = objectId();
		pGripData->setGripPoint(ptPos);
		pGripData->setAppData((void*)&m_pGripAppData[i]);
		pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
		pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
		grips.append(pGripData);

		i += 1;

		//调用基类加入单击修改
		SubAddHitEditGrip(grips);
	}

	if (sName.Find(_T("井")) != -1)
	{
		//增加一个修改夹点
		double dCmd = PixelToWcs(20);

		pt.x += dCmd;
		pt.y += dCmd;

		pGripData = new AcDbGripData;
		memset(&m_pGripAppData[i],0,sizeof(AecGripData));
		m_pGripAppData[i].nIndex = i;
		m_pGripAppData[i].ePos = eFlag;//eEdit;
		m_pGripAppData[i].ptGrip = pt;
		m_pGripAppData[i].nColor = kGreen;
		_tcscpy(m_pGripAppData[i].szTip,_T("修改夹点"));
		_tcscpy(m_pGripAppData[i].szID,m_pPart->GetGUID());
		m_pGripAppData[i].pOwner = (AcDbEntity*)this;
		m_pGripAppData[i].idHost = objectId();
		pGripData->setGripPoint(pt);
		pGripData->setAppData((void*)&m_pGripAppData[i]);
		pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
		pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
		grips.append(pGripData);

		//洞口 2
		i+= 1;
		AcGePoint3d ptPos;
		if (!m_pPart->GetSpecialtyData()->GetAt(KEY_NOPOS,ptPos))
		{
			ptPos = GetOrgPoint();
		}
		ptPos.x -= dCmd;
		ptPos.y -= dCmd;

		pGripData = new AcDbGripData;
		memset(&m_pGripAppData[i],0,sizeof(AecGripData));
		m_pGripAppData[i].nIndex = i;
		m_pGripAppData[i].ePos = eEnd;
		m_pGripAppData[i].ptGrip = ptPos;
		m_pGripAppData[i].nColor = kBlue;
		_tcscpy(m_pGripAppData[i].szTip,_T("编号夹点"));
		_tcscpy(m_pGripAppData[i].szID,m_pPart->GetGUID());
		m_pGripAppData[i].pOwner = (AcDbEntity*)this;
		m_pGripAppData[i].idHost = objectId();
		pGripData->setGripPoint(ptPos);
		pGripData->setAppData((void*)&m_pGripAppData[i]);
		pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
		pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
		grips.append(pGripData);
	}

	//动态标注
	//直线,半径 标注风格
	if (!grips.isEmpty())
	{
		SubAddDimPoints(grips,curViewDir);
	}

	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::SubAddDimPoints(AcDbGripDataPtrArray& grips,const AcGeVector3d& curViewDir) const
{
	if (GetDimGripOff())
		return Acad::eOk;

	CString sName;
	sName = GetName();

	AcGePoint3d ptOrg = m_pPart->GetOrgPoint(true);
	AcGePoint3d ptSta,ptEnd,ptMid;
	int nShpae = 0;
	GetSpecialtyData()->GetAt(_T("nShape"),nShpae);//方

	AcGeVector3d vtZ(0,0,0);
	AcGeVector3d vtX;
	double dL = 0.0,dW = 0.0,dD = 0.0,dT = 0.0;	

	if ( sName.CompareNoCase(_T("开洞")) == 0)
	{
		
		if (nShpae == eRect)
		{
			GetSpecialtyData()->GetAt(_T("m_dL"),dL);//x
			GetSpecialtyData()->GetAt(_T("m_dW"),dW);//z
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			vtX = vtZ;
			vtX.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vtX.normalize();

			ptSta = ptOrg;
			ptEnd = ptOrg;
			ptSta.z -= 0.5 * dL;
			ptEnd.z -= 0.5 * dL;
			ptSta -= vtX * 0.5 * dW;
			ptEnd += vtX * 0.5 * dW;
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid.z -= 10.0 * 100.0;

			//X
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			ptSta = ptOrg;
			ptEnd = ptOrg;
			ptSta.z += 0.5 * dL;
			ptEnd.z -= 0.5 * dL;

			ptMid = MidPoint(ptSta,ptEnd);
			ptMid -= vtX * 10.0 * 100.0;

			//Z
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);
		}
		else if (nShpae == eCircle)
		{
			GetSpecialtyData()->GetAt(_T("dRad"),dD);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			vtX = vtZ;
			vtX.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vtX.normalize();
			
			ptSta = ptOrg - vtX * dD;
			ptEnd = ptOrg + vtX * dD;
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid.z += 10.0 * 100.0;
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,2,2.0 * dD);
		}
		else
		{
			//异形
			//...
		}
	}
	else if (sName.CompareNoCase(_T("套管")) == 0)
	{
		if (nShpae == eCircle)
		{
			GetSpecialtyData()->GetAt(_T("dD"),dD);
			GetSpecialtyData()->GetAt(_T("dT"),dT);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			vtX = vtZ;
			vtX.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vtX.normalize();

			ptSta = ptOrg;
			ptSta -= vtX * 0.5 * dD;
			ptEnd = ptOrg;
			ptEnd += vtX * 0.5 * dD;
			ptMid = ptOrg;
			ptMid.z += 10.0 * 100.0;

			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,4,dD,dT);
		}
		else if (nShpae == eRect)
		{
			GetSpecialtyData()->GetAt(_T("dH"),dL);
			GetSpecialtyData()->GetAt(_T("dL"),dW);
			GetSpecialtyData()->GetAt(_T("dT"),dT);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			vtX = vtZ;
			vtX.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vtX.normalize();

			ptSta = ptOrg;
			ptEnd = ptOrg;
			ptSta.z -= 0.5 * dL;
			ptEnd.z -= 0.5 * dL;
			ptSta -= vtX * 0.5 * dW;
			ptEnd += vtX * 0.5 * dW;
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid.z -= 10.0 * 100.0;

			//X
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			ptSta = ptOrg;
			ptEnd = ptOrg;
			ptSta.z += 0.5 * dL;
			ptEnd.z -= 0.5 * dL;

			ptMid = MidPoint(ptSta,ptEnd);
			ptMid -= vtX * 10.0 * 100.0;

			//Z
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);
		} 
		else
		{
			//...
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::AddDimPoints(AcDbGripDataPtrArray& grips,const AcGeVector3d& curViewDir,
												const AcGePoint3d& ptSta,const AcGePoint3d& ptEnd,
												const AcGePoint3d& ptMid,int nDimType,double dVal/* = -1.0*/,
												double dt) const
{
	int i = grips.length();
	if (i >= GRIP_MAXNUM)//多余不显示
		return Acad::eOk;

	EPosition ePos = eDim0;
	memset(&m_pGripAppData[i],0,sizeof(AecGripData));

	m_pGripAppData[i].nIndex = i;
	m_pGripAppData[i].ePos = ePos;
	m_pGripAppData[i].nColor = kGreen;
	m_pGripAppData[i].ptGrip = ptMid;
	m_pGripAppData[i].ptDim[0] = ptSta;
	m_pGripAppData[i].ptDim[1] = ptEnd;
	m_pGripAppData[i].nDimType = nDimType;

	if (dVal > 1.e-3)
	{
		if (nDimType == 1)
		{
			_stprintf(m_pGripAppData[i].szTip,_T("R%.1f"),dVal);
		}
		else if (nDimType == 2)//@100 标注
		{
			_stprintf(m_pGripAppData[i].szTip,_T("Ø%.1f"),dVal);
		}
		else if (nDimType == 3)//角度标注
		{
			_stprintf(m_pGripAppData[i].szTip,_T("%.1f°"),dVal);
		}
		else if (nDimType == 4)//@107x3.5
		{
			_stprintf(m_pGripAppData[i].szTip,_T("Ø%.1fx%.1f"),dVal,dt);
		}
	}
	else
	{
		_tcscpy(m_pGripAppData[i].szTip,_T(" "));
	}
	_tcscpy(m_pGripAppData[i].szID,_T(" "));
	m_pGripAppData[i].pOwner = (AcDbEntity*)this;

	AcDbGripData* pGripData = new AcDbGripData;
	pGripData->setGripPoint(ptMid);
	pGripData->setAppData((void*)&m_pGripAppData[i]);
	pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
	pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
	grips.append(pGripData);

	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::subMoveGripPointsAt(const AcDbVoidPtrArray& appData, const AcGeVector3d& offset, const int bitflags)
{
	if (!appData.isEmpty())
	{
		if (HitOnGripEdit(appData))
		{
			return Acad::eOk;
		}

		CString sName;
		m_pPart->GetName(sName);

		AecGripData* pAppData = NULL;
		pAppData = (AecGripData*)appData.first();

		if (pAppData->nIndex == 0)
		{
			AssertWriteEnabled();

			AddMove(offset);

			AcGeMatrix3d xform;
			xform.setToTranslation(offset);
			m_drawable2d.transformBy(xform);

			AcDbObjectId idHost;
			m_pPart->GetSpecialtyData()->GetAt(KEY_ASSOIC,idHost);

			//reset
			GripMessage msg;
			memset(&msg,0,sizeof(GripMessage));
			msg.nSegindex = -1;
			msg.nType = -1;
			msg.pParam = 0;
			msg.nData = -1;
			_tcscpy(msg.szLockId, _T("0"));//锁定id,如果有
			msg.fData = 0;
			msg.nSegindex = 0;
			msg.nSubSegIndex = 0;
			msg.vtOffset.set(0,0,0);
			msg.ptGrip.set(0,0,0);

			//发送调整通知命令
			msg.nType = eAdjust0;
			msg.nData = 0;
			msg.ptGrip = pAppData->ptGrip;
			msg.idHost = idHost;//pAppData->idHost;
			msg.vtOffset = offset;

			Create();

			PushGripMessage(msg);
		}
		else
		{
			if (sName.CompareNoCase(_T("套管")) == 0 ||
				sName.CompareNoCase(_T("开洞")) == 0)
			{
				if (pAppData->nIndex < 2 )
				{
					AecInterface inf;
					GripMessage msg;
					memset(&msg,0,sizeof(GripMessage));
					//reset
					msg.nSegindex = -1;
					msg.nType = -1;
					msg.idHost.setNull();
					msg.pParam = 0;
					msg.nData = -1;
					_tcscpy(msg.szLockId, _T("0"));//锁定id,如果有
					msg.fData = 0;
					msg.nSegindex = 0;
					msg.nSubSegIndex = 0;
					msg.vtOffset.set(0,0,0);
					msg.ptGrip.set(0,0,0);

					//发送绘制管子命令
					msg.nType = eCommand0;
					msg.nData = 0;
					GetInterface(msg.nData,inf);

					msg.ptGrip = inf.ptPos;
					msg.idHost = pAppData->idHost;
					msg.vtOffset = offset;

					PushGripMessage(msg);

					static CString sCmd = _T("PL_wpipeadd ");
					if (!sCmd.IsEmpty())
					{
						acedPostCommand(_T("\x03"));
						acedPostCommand(sCmd);
					}
				}
				else if (pAppData->nIndex == 2)
				{
					AcGePoint3d ptOn;
					if ( !m_pPart->GetSpecialtyData()->GetAt(KEY_NOPOS,ptOn) )
					{
						ptOn = GetOrgPoint();
					}
					ptOn += offset;
					m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptOn);
				}
			}
			else if (sName.Find(_T("井")) != -1)
			{
				GripMessage msg;
				memset(&msg,0,sizeof(GripMessage));
				//reset
				msg.nSegindex = -1;
				msg.nType = -1;
				msg.idHost.setNull();
				msg.pParam = 0;
				msg.nData = -1;
				_tcscpy(msg.szLockId, _T("0"));//锁定id,如果有
				msg.fData = 0;
				msg.nSegindex = 0;
				msg.nSubSegIndex = 0;
				msg.vtOffset.set(0,0,0);
				msg.ptGrip.set(0,0,0);

				msg.nType = eFlag;//eEdit;
				msg.nData = 0;

				msg.ptGrip = pAppData->ptGrip;
				msg.idHost = pAppData->idHost;
				msg.vtOffset = offset;

				PushGripMessage(msg);

				static CString sCmd = _T("PL_WellModify ");
				if (!sCmd.IsEmpty())
				{
					acedPostCommand(_T("\x03"));
					acedPostCommand(sCmd);
				}
			}
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::subGetStretchPoints(AcGePoint3dArray& stretchPoints) const
{
	assertReadEnabled();
	
	AcGePoint3d pt = m_pPart->GetOrgPoint(true);
	stretchPoints.append(pt);
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::subMoveStretchPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset)
{
	AssertWriteEnabled();

	if (!indices.isEmpty())
	{
		int nIndex = indices.first();
		if (nIndex == 0)
		{
			AddMove(offset);

			m_pPart->Transformby((AcGeVector3d&)offset);
			m_pPart->Create();

			AcGeMatrix3d xform;
			xform.setToTranslation(offset);
			m_drawable2d.transformBy(xform);

			Create();

			AcGePoint3d ptPos;
			m_pPart->GetSpecialtyData()->GetAt(KEY_NOPOS,ptPos);
			ptPos += offset;
			m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptPos);
		}
	}
	return Acad::eOk;
}

void AecDbX3dPartEntity::GetGripText(int nPos, CString& sText)
{

}

Acad::ErrorStatus AecDbX3dPartEntity::subGetOsnapPoints(AcDb::OsnapMode     osnapMode,
														INT_PTR             gsSelectionMark,
														const AcGePoint3d&  pickPoint,
														const AcGePoint3d&  lastPoint,
														const AcGeMatrix3d& viewXform,
														AcGePoint3dArray&   snapPoints,
														AcDbIntArray&       geomIds) const
{
	assertReadEnabled();
	snapPoints.append(GetOrgPoint(true));
	return m_pPart->getOsnapPoints(osnapMode,gsSelectionMark,pickPoint,lastPoint,viewXform,snapPoints,geomIds);
}

Acad::ErrorStatus AecDbX3dPartEntity::subGetGeomExtents(AcDbExtents& extents) const
{
	assertReadEnabled();

	AcDb3dSolid* pSolid = m_pPart->CreateDraw3dSolid();
	if (pSolid != NULL)
	{
		pSolid->getGeomExtents(extents);
		delete pSolid;
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::subIntersectWith( const AcDbEntity*	pEnt, 
													   AcDb::Intersect		intType, 
													   AcGePoint3dArray&	points, 
													   INT_PTR				thisGsMarker, 
													   INT_PTR				otherGsMarker) const
{
	assertReadEnabled();

	AcDb3dSolid* pSolid = m_pPart->CreateDraw3dSolid();
	if (pSolid != NULL)
	{
		pSolid->intersectWith(pEnt,intType,points,thisGsMarker,otherGsMarker);
		delete pSolid;
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::subIntersectWith( const AcDbEntity*	pEnt,
														AcDb::Intersect		intType,
														const AcGePlane&	projPlane,
														AcGePoint3dArray&	points,
														INT_PTR				thisGsMarker,
														INT_PTR				otherGsMarker) const
{
	AcDb3dSolid* pSolid = m_pPart->CreateDraw3dSolid();
	if (pSolid != NULL)
	{
		pSolid->intersectWith(pEnt,intType,projPlane,points,thisGsMarker,otherGsMarker);
		delete pSolid;
	}
	return Acad::eOk;
}
#endif

Acad::ErrorStatus AecDbX3dPartEntity::Draw2d(AcGiDraw &dc) const
{
	assertReadEnabled();

	if (m_pPart != NULL)
	{
		AcDbObjectId idCur = dc.GetLayerId();
		dc.SetLayer(layerId());

		if (!Draw2DBuffers(dc))
		{
			AcGePoint3d ptOrg = m_pPart->GetOrgPoint(true);

			//绘制十字定位,大小
			double dCmd = 50.0;

			AcGePoint3d ptGe[2];
			ptGe[0] = ptOrg;
			ptGe[0] -= AcGeVector3d::kXAxis * 0.5 * dCmd;
			ptGe[1] = ptGe[0] + dCmd * AcGeVector3d::kXAxis;

			AcDbLine *pLn = new AcDbLine(ptGe[0], ptGe[1]);
			dc.DrawEntity(pLn);
			Add2DBuffer(pLn);

			ptGe[0] = ptOrg;
			ptGe[0] -= AcGeVector3d::kYAxis * 0.5 * dCmd;
			ptGe[1] = ptGe[0] + dCmd * AcGeVector3d::kYAxis;

			pLn = new AcDbLine(ptGe[0], ptGe[1]);
			dc.DrawEntity(pLn);
			Add2DBuffer(pLn);

			AcDbVoidPtrArray arDraw2d;
			DrawSymbol2d(dc, arDraw2d);

			Add2DBuffer(arDraw2d);
		}

		//绘制编号
		CString sLable = GetLabel();
		CString sName = GetName();

		BOOL bHideNo = FALSE;
		GetSpecialtyData()->GetAt(KEY_HIDENO,bHideNo);

		sLable.TrimRight(_T(" "));
		if (!sLable.IsEmpty() && !bHideNo )
		{
			DrawLabel(dc,sLable);
		}

		dc.SetLayer(idCur);
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::DrawSymbol2d(AcGiDraw &dc,AcDbVoidPtrArray& arBuffer2d) const
{
	AecComplexCurve curEdage;
	m_drawable2d.GetEdage(curEdage);

	AecComplexCurve curCurve, curLoop;
	for (int i = 0;i < curEdage.length();i++)
	{
		const AecEqui::AecCurveElement &el = curEdage.at(i);
		if (el.gsMark == HATCH_LOOP)
		{
			curLoop.append(el);
		}
		else
		{
			curCurve.append(el);
		}
	}

	if (curCurve.length() > 0)
	{
		AecComplexCurveDraw drawable2d;
		drawable2d.SetEdage(curCurve);
		drawable2d.Draw2d(dc, dc.GetLayerId(), dc.GetLineTypeId(), dc.GetLineTypeId());
		drawable2d.explode(arBuffer2d, dc.GetLayerId(), dc.GetLineTypeId(), dc.GetLineTypeId());
	}

	//绘制填充,如人孔等
	if (curLoop.length() > 0)
	{
		AcDbCurve *pCurve = NULL;
		AcDbVoidPtrArray arCurPtrs,arRes;
		for (int i = 0;i < curLoop.length();i++)
		{
			pCurve = curLoop.segat(i);
			if (pCurve != NULL)
			{
				arCurPtrs.append(pCurve);
			}
		}

		pCurve = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs, arRes);
		AcDbPolyline *pPl = AcDbPolyline::cast(pCurve);
		if (pPl != NULL)
		{
			CString sPattern = _T("SOLID");
			const AecDbObjXDataMap *pXData = GetSpecialtyData();
			if (pXData != NULL)
			{
				pXData->GetAt(KEY_PATTERN, sPattern);
			}

			arRes.removeAll();
			PolylineHatch(pPl, arRes, sPattern, AcGeVector3d::kZAxis);

			AcDbEntity *pEnt = NULL;
			for(int i = 0;i < arRes.length();i++)
			{
				pEnt = (AcDbEntity*)arRes.at(i);
				dc.DrawEntity(pEnt);
			}
			arBuffer2d.append(arRes);
		}
	}

	CString sRxDraw;
	if ( GetSpecialtyData()->GetAt(KEY_DRAW2D,sRxDraw) )
	{
		AecDbXDrawPointer aecDbXDraw(this,sRxDraw);
		aecDbXDraw.Draw2d(dc);

		AcDbVoidPtrArray arEntPtrs;
		dc.Get2dBuffer(arEntPtrs);
		Add2DBuffer(arEntPtrs);
	}

	return Acad::eOk;
}

int AecDbX3dPartEntity::GetDraw2dables(Adesk::UInt16 nDrawStyle, AcDbVoidPtrArray& arEntPtrs) const
{
	assertReadEnabled();

	if (m_pPart != NULL)
	{
		AcGePoint3d ptOrg = m_pPart->GetOrgPoint(true);

		//绘制十字定位,大小
		double dCmd = PixelToWcs(3);

		AecDbObjXDataMap xData;
		const AecDbObjXDataMap* pXData = GetSpecialtyData();
		if (pXData != NULL)
		{
			CString sName = GetName();
			xData.CopyFrom(pXData);
			xData.SetAt(KEY_NAME,sName);
			xData.SetAt(KEY_ORGPT,ptOrg);
		}

		AcGePoint3d ptGe[2];
		ptGe[0] = ptOrg;
		ptGe[0] -= AcGeVector3d::kXAxis * 0.5 * dCmd;
		ptGe[1] = ptGe[0] + dCmd * AcGeVector3d::kXAxis;

		AcGeLineSeg3d ln3d(ptGe[0],ptGe[1]);
		AcDbLine* pLn1 = new AcDbLine(ptGe[0],ptGe[1]);
		//xData.Write(pLn1,BIMDATA_APP);

		int nIndex = arEntPtrs.length();
		arEntPtrs.append(pLn1);

		ptGe[0] = ptOrg;
		ptGe[0] -= AcGeVector3d::kYAxis * 0.5 * dCmd;
		ptGe[1] = ptGe[0] + dCmd * AcGeVector3d::kYAxis;

		ln3d.set(ptGe[0],ptGe[1]);
		pLn1 = new AcDbLine(ptGe[0],ptGe[1]);
		//xData.Write(pLn1,BIMDATA_APP);
		arEntPtrs.append(pLn1);

		AcGiExplodeDraw dc(arEntPtrs);
		DrawSymbol2d(dc, arEntPtrs);

		//洞口或套管写标高
		AecInterface inf;
		if ( GetInterface(0,inf) )
		{
			if (inf.vtDir.isParallelTo(AcGeVector3d::kZAxis))
			{
				xData.SetAt(KEY_CENEL,inf.ptPos.z);
			}
			else
			{
				if (inf.nSectType == eCircle)
				{
					xData.SetAt(KEY_CENEL,inf.ptPos.z);
				}
				else
				{
					xData.SetAt(KEY_BOTMEL,inf.ptPos.z - 0.5 * inf.dSize2);
				}
			}
		}

		AcDbEntity* pEnt = NULL;
		for (int ii = nIndex;ii < arEntPtrs.length();ii++)
		{
			pEnt = (AcDbEntity*)arEntPtrs.at(ii);
			pEnt->setLayer(layerId());
			xData.Write(pEnt,BIMDATA_APP);
		}

		//绘制编号
		CString sLable = GetLabel();
		sLable.TrimRight(_T(" "));
		if (!sLable.IsEmpty())
		{
			AcGiExplodeDraw dc(arEntPtrs);
			DrawLabel(dc,sLable);
		}
	}
	return Acad::eOk;
}

#include "HlrCutOption.h"
void AecDbX3dPartEntity::ProcessHlrResult(const AcArray<AcDbEntity*> &ar
	, const std::map<AcDbEntity*, AcArray<AcDbEntity*>> &preAr
	, AcArray<AcDbEntity *> &output) const
{
	assertReadEnabled();
	// 补充xdata内的数据
	if (m_pPart == NULL) return;
	if (ar.isEmpty() && preAr.empty()) return;

	AcGePoint3d ptOrg = m_pPart->GetOrgPoint(true);
	AecDbObjXDataMap xData;
	const AecDbObjXDataMap *pXData = GetSpecialtyData();
	if (pXData != NULL)
	{
		CString sName = GetName();
		xData.CopyFrom(pXData);
		xData.SetAt(KEY_NAME, sName);
		xData.SetAt(KEY_ORGPT, ptOrg);
	}

	//洞口或套管写标高
	AecInterface inf;
	if (GetInterface(0, inf))
	{
		if (inf.vtDir.isParallelTo(AcGeVector3d::kZAxis))
		{
			xData.SetAt(KEY_CENEL, inf.ptPos.z);
		}
		else
		{
			if (inf.nSectType == eCircle)
			{
				xData.SetAt(KEY_CENEL, inf.ptPos.z);
			}
			else
			{
				xData.SetAt(KEY_BOTMEL, inf.ptPos.z - 0.5 * inf.dSize2);
			}
		}
	}

	HlrCutOption::ProcessHlrResult(this, FALSE, .0, FALSE, ar, preAr, output, &xData);
}

void AecDbX3dPartEntity::PreprocessForHlr(const AcGePoint3d &ptPlnO
	, const AcGeVector3d &vtPlnN
	, AcArray<AcDbEntity *> &ar) const
{
	assertReadEnabled();
	if (m_pPart == NULL) return;

	if (!HlrCutOption::getHlrSTYLE2D_HOLE()) return;

	// 没有洞口方向，直接走3D
	AcGeVector3d vtZ;
	if (!m_pPart->GetSpecialtyData()->GetAt(_T("vtDir"), vtZ)) return;

	// 水平剖切 GetDraw2dables，洞口方向 平行剖面，或者垂直剖面
	if (vtPlnN.isParallelTo(AcGeVector3d::kZAxis)
		&& (vtZ.isPerpendicularTo(vtPlnN) || vtZ.isParallelTo(vtZ)))
	{
		AcDbVoidPtrArray arEnts;
		GetDraw2dables(0, arEnts);
		for (int i(0); i < arEnts.length(); ++i)
		{
			ar.append((AcDbEntity *)arEnts[i]);
		}

		return;
	}
}

Acad::ErrorStatus AecDbX3dPartEntity::SetLabel(const TCHAR* pszLab)
{
	assertWriteEnabled();

	if (pszLab != NULL)
	{
		m_pPart->GetSpecialtyData()->SetAt(KEY_NO,pszLab);
	}
	return Acad::eOk;
}

CString AecDbX3dPartEntity::GetLabel() const
{
	assertReadEnabled();

	CString sLab;
	m_pPart->GetSpecialtyData()->GetAt(KEY_NO,sLab);
	return sLab;
}

BOOL DLLIMPEXP GetDocScale(double& dPScale)
{
	//获取初始化数据
	dPScale = 100.0;
	AecDbObjXDataMap xDataMap;
	KTModelLayoutXData::ReSet(xDataMap);

	if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT,xDataMap))
	{
		return FALSE;
	}

	CString sDocScale = "";
	xDataMap.GetAt(_T("Scale"),sDocScale);
	int nIndex = sDocScale.Find(':',0);
	dPScale = 1.0;
	if (nIndex != -1)
	{
		dPScale = _ttof(sDocScale.Mid(nIndex + 1)) / _ttof(sDocScale.Mid(0,nIndex));
	}
	return TRUE;
}

BOOL DLLIMPEXP GetDimGripOff()
{
	AecDbObjXDataMap xDataMap;
	KTModelLayoutXData::ReSet(xDataMap);

	if (!KTModelLayoutXData::ReadModelXData(KT_PIPEINIT,xDataMap))
	{
		return FALSE;
	}
	
	BOOL bDimGripOff = FALSE;
	xDataMap.GetAt(KEY_DIMGRIPOFF,bDimGripOff);
	
	return bDimGripOff;
}

Acad::ErrorStatus AecDbX3dPartEntity::DrawLabel(AcGiDraw &dc,LPCTSTR pszLab) const
{
	BOOL bHideNo = FALSE;
	m_pPart->GetSpecialtyData()->GetAt(KEY_HIDENO,bHideNo);
	if (bHideNo)
		return Acad::eOk;

	AcDbObjectId id = acdbCurDwg()->textstyle();

	AcDbText* pText = new AcDbText;
	pText->setTextStyle(id);
	pText->setLayer(layerId());
	pText->setWidthFactor(0.75);
	double dScale = 100.0;
	GetDocScale(dScale);

	pText->setHeight(2.5 * dScale);
	pText->setTextString(pszLab);

	AcGePoint3d ptOn = GetOrgPoint();
	if (!m_pPart->GetSpecialtyData()->GetAt(KEY_NOPOS,ptOn) )
	{
		ptOn = GetOrgPoint();
	}

	pText->setPosition(ptOn);
	pText->setHorizontalMode(AcDb::kTextCenter);
	pText->setAlignmentPoint(ptOn);

	dc.DrawEntity(*pText);

	delete pText;//?
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::Draw3d(AcGiDraw &dc) const
{
	assertReadEnabled();

	if (Has3DBuffer())
	{
		AcDbEntity* pEnt = NULL;
		const AcDbVoidPtrArray &ar3D = Get3DBuffer();
		for (int i = 0;i < ar3D.length();i++)
		{
			pEnt = (AcDbEntity*)ar3D.at(i);
			dc.DrawEntity(*pEnt);
		}
		return Acad::eOk;
	}

	AcCmTransparency tr = transparency();
	AcCmTransparency oldTr = dc.SetTransparency(tr);

	if (m_pPart != NULL)
	{
		if (m_pPart->GetBoolOperFor() == AcDb::kBoolUnite)
		{
			m_pPart->Draw3d(dc);
			m_pPart->DrawInf(dc);

			AcDb3dSolid* pSolid = m_pPart->CreateDraw3dSolid();
			if (pSolid != NULL)
			{
				Add3DBuffer(pSolid);
			}
		}
		else
		{
			//绘制中间一个球体 示意
			AcGePoint3d ptOrg = m_pPart->GetOrgPoint(true);
			AcDbEntity* p3dEnt = dc.DrawSphere(ptOrg,10.0);
			if (p3dEnt != NULL)
			{
				Add3DBuffer(p3dEnt);
			}
		}
	}
	dc.SetTransparency(oldTr);
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::dwgInFields (AcDbDwgFiler* pFiler)
{
	AssertWriteEnabled();

	//----- Read parent class information first.
	Acad::ErrorStatus es = Acad::eOk;
	if ( !pFiler->isKindOf(CMFCDbDwgFiler::desc()))
	{
		es = AecDbEntityBase::dwgInFields (pFiler) ;
		if ( es != Acad::eOk )
			return (es) ;
	}

	//----- Object version number needs to be read first
	Adesk::UInt32 version =0 ;
	if ( (es = pFiler->readUInt32 (&version)) != Acad::eOk )
		return (es) ;

	if ( version > AecDbX3dPartEntity::kCurrentVersionNumber )
		return (Acad::eMakeMeProxy) ;

	m_pPart->dwgInFields(pFiler);
	m_pPart->Create();

	m_drawable2d.dwgInFields(pFiler, version);

	return (pFiler->filerStatus ());
}

Acad::ErrorStatus AecDbX3dPartEntity::dwgOutFields(AcDbDwgFiler* pFiler) const
{
	assertReadEnabled();

	//----- Save parent class information first.
	Acad::ErrorStatus es = Acad::eOk;
	if ( !pFiler->isKindOf(CMFCDbDwgFiler::desc()))
	{
		es = AecDbEntityBase::dwgOutFields (pFiler) ;
		if ( es != Acad::eOk )
			return (es) ;
	}

	//----- Object version number needs to be saved first
	if ( (es =pFiler->writeUInt32 (AecDbX3dPartEntity::kCurrentVersionNumber)) != Acad::eOk )
		return (es) ;

	m_pPart->dwgOutFields(pFiler);
	m_drawable2d.dwgOutFields(pFiler, AecDbX3dPartEntity::kCurrentVersionNumber);

	return (pFiler->filerStatus ());
}

Acad::ErrorStatus AecDbX3dPartEntity::dxfInFields (AcDbDxfFiler* pFiler)
{
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::dxfOutFields(AcDbDxfFiler* pFiler) const
{
	return Acad::eOk;
}

void AecDbX3dPartEntity::AssertWriteEnabled(Adesk::Boolean autoUndo, Adesk::Boolean recordModified )
{
	//if (objectId().isValid())
	{
		Clean3DBuffer();
		//FreeBuffer(0,m_ar2DDrableBufPtrs);
		//FreeBuffer(0,m_ar3DDrableBufPtrs);
		//FreeBuffer(0,m_ar2DDrableBufPtrs2);

		//m_ar3DDrableBufPtrs.removeAll();
		//m_ar2DDrableBufPtrs.removeAll();
		//m_ar2DDrableBufPtrs2.removeAll();

		AecDbEntityBase::AssertWriteEnabled(autoUndo, recordModified);
		//assertWriteEnabled();
	}
}

bool AecDbX3dPartEntity::GetInterface(AcArray<AecInterface>& arInfs) const
{
	assertReadEnabled();

	CString sName;
	m_pPart->GetName(sName);

	if (sName.CompareNoCase(_T("开洞")) == 0)
	{
		int nShap = 0;
		m_pPart->GetSpecialtyData()->GetAt(_T("nShape"),nShap);//圆
		if (nShap == (int)eCircle)
		{
			double dH = 0.0,dRad = 0.0,dEl = 0.0;
			m_pPart->GetSpecialtyData()->GetAt(_T("dH"),dH);
			m_pPart->GetSpecialtyData()->GetAt(_T("dRad"),dRad);
			m_pPart->GetSpecialtyData()->GetAt(_T("m_dZ"),dEl);
			AcGePoint3d ptCen = m_pPart->GetOrgPoint(true);

			AcGeVector3d vtZ;
			m_pPart->GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			AecInterface inf;
			inf.dGasket = 0;
			inf.nSectType = eCircle;
			inf.dSize1 = 2.0 * dRad;//DN
			inf.dSize2 = 2.0 * dRad;//DN
			inf.ptPos = ptCen;
			inf.vtDir = vtZ;
			arInfs.append(inf);
		}
		else if (nShap == (int)eRect)
		{
			double dL = 0.0,dW = 0.0,dH = 0.0;
			m_pPart->GetSpecialtyData()->GetAt(_T("dL"),dL);
			m_pPart->GetSpecialtyData()->GetAt(_T("dW"),dW);
			m_pPart->GetSpecialtyData()->GetAt(_T("dH"),dH);

			AcGePoint3d ptCen = m_pPart->GetOrgPoint(true);

			AcGeVector3d vtZ;
			m_pPart->GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			AecInterface inf;
			inf.dGasket = 0;
			inf.nSectType = eRect;
			inf.dSize1 = dL;
			inf.dSize2 = dW;
			inf.ptPos = ptCen;
			inf.vtDir = vtZ;
			arInfs.append(inf);
		}
	}
	else if (sName.CompareNoCase(_T("套管")) == 0)
	{
		int nShap = 0;
		m_pPart->GetSpecialtyData()->GetAt(_T("nShape"),nShap);//圆
		if (nShap == eCircle)
		{
			double dD = 0.0,dT = 0.0;
			AcGeVector3d vtZ;
			m_pPart->GetSpecialtyData()->GetAt(_T("dD"),dD);
			m_pPart->GetSpecialtyData()->GetAt(_T("dT"),dT);
			m_pPart->GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			AcGePoint3d ptCen = m_pPart->GetOrgPoint(true);

			AecInterface inf;
			inf.dGasket = 0;
			inf.dSize1 = dD;//DN
			inf.dSize2 = dD;//DN
			inf.ptPos = ptCen;
			inf.vtDir = vtZ;
			inf.nSectType = eCircle;
			arInfs.append(inf);
		}
		else if (nShap == eRect)
		{
			double dL = 0.0,dW = 0.0,dT = 0.0;
			AcGeVector3d vtZ;

			m_pPart->GetSpecialtyData()->GetAt(_T("dH"),dL);
			m_pPart->GetSpecialtyData()->GetAt(_T("dL"),dW);
			m_pPart->GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			AcGePoint3d ptCen = m_pPart->GetOrgPoint(true);

			AecInterface inf;
			inf.dGasket = 0;
			inf.dSize1 = dL;
			inf.dSize2 = dW;//DN
			inf.ptPos = ptCen;
			inf.vtDir = vtZ;
			inf.nSectType = eRect;
			arInfs.append(inf);
		}
	}
	return !arInfs.isEmpty();
}

bool AecDbX3dPartEntity::GetInterface(int nIndex,AecInterface& inf) const
{
	assertReadEnabled();

	AcArray<AecInterface> arInfs;
	GetInterface(arInfs);

	if (nIndex > -1 && nIndex < arInfs.length())
	{
		inf = arInfs.at(nIndex);
		return true;
	}
	return false;
}

int	 AecDbX3dPartEntity::GetInterfaceCount() const
{
	assertReadEnabled();
	AcArray<AecInterface> arInfs;
	GetInterface(arInfs);

	return arInfs.length();
}

int  AecDbX3dPartEntity::GetActiveInf() const
{
	assertReadEnabled();
	return -1;
}

void AecDbX3dPartEntity::SetActiveInf(int nIndex)
{
	
}

void AecDbX3dPartEntity::LockInf(int nInf)
{
	
}

bool AecDbX3dPartEntity::TransformAssocInf(int nInf,const AcGeMatrix3d& xform)
{
	AssertWriteEnabled();

	//柱子类似 FITTING件没有橡皮拉伸特征,固定整体移动
	transformBy(xform);

	return true;//继续发消息
}

//盆板添加异形偏心井结构
bool AecDbX3dPartEntity::SetAsWell(LPCTSTR pszPoint2dsTop,LPCTSTR pszPoint2dsBom,double dH,double dThick,double dBomThick,double dElBom,bool bHasHole/* = false*/)
{
	if(!bHasHole)//含有洞组合
	{
		AssertWriteEnabled();
		m_pPart->RemoveAll3dSolidRec();
	}

	//洞口编号默认不显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,TRUE);

	//2d
	AcDbPolyline* pPlTop = CoreTools::StringToPolyline(pszPoint2dsTop);
	AcDbPolyline* pPlBom = CoreTools::StringToPolyline(pszPoint2dsBom);

	if (!pPlTop || !pPlBom)
	{
		DELETE_PTR(pPlTop);
		DELETE_PTR(pPlBom);
		return false;
	}

	if (pPlTop != NULL && pPlBom != NULL)
	{
		SetDrawable2d(pPlTop);
		SetDrawable2d(pPlBom);		
	}

	//3D
	m_pPart->SetName(_T("异形偏心井"));

	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	pXSolid->CreateLoftReducer(pszPoint2dsTop,pszPoint2dsBom,dElBom - dH,dH,dThick,dBomThick);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);

	//2.本体
	m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

	AcDbExtents ext;
	pPlTop->getGeomExtents(ext);
	AcGePoint3d ptOrg = MidPoint(ext.maxPoint(),ext.minPoint());
	ptOrg.z = dElBom;

	m_pPart->SetOrgPoint(ptOrg);
	m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
	m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
	m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("TopScr"),pszPoint2dsTop);
	m_pPart->GetSpecialtyData()->SetAt(_T("BomScr"),pszPoint2dsBom);
	m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("dThick"),dThick);
	m_pPart->GetSpecialtyData()->SetAt(_T("dBomThick"),dBomThick);

	m_pPart->Create();

	return true;
}

//盆板添加波浪井拉伸结构
bool AecDbX3dPartEntity::SetAsWell(LPCTSTR pszPoint2dsSec,double dExL,const AcGeVector3d& vtDir,bool bHasHole/* = false*/)
{
	return false;
}

//盆板添加圆台底结构
bool AecDbX3dPartEntity::SetAsWell(const AcGePoint3d& ptCen,double dR,double dr,double dH,double dt,double dBomt,const AcGeVector2d& vtOffset,bool bHasHole/* = false*/)
{
	if (!bHasHole)
	{
		AssertWriteEnabled();
		m_pPart->RemoveAll3dSolidRec();
	}

	//洞口编号默认不显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,TRUE);

	m_pPart->SetName(_T("圆台井"));

	//2D
	SetDrawable2d(ptCen,dR);
	SetDrawable2d(ptCen,dr);

	//3D
	AcGePoint3d ptOrg = ptCen;
	ptOrg.z -= 0.5 * ( dH + dBomt);
	AcGeVector3d vtZ = -AcGeVector3d::kZAxis;

	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	pXSolid->Create(AcDbX3dSolid::kCone,ptOrg,vtZ,3,dR+dt,dr+dt,dH + dBomt);//CON R1xR2xH
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);

	AcGePoint3d ptT = ptOrg;
	ptT.z += dt - 0.5 * dBomt;
	pXSolid = new AcDbX3dSolid;
	pXSolid->Create(AcDbX3dSolid::kCone,ptT,vtZ,3,dR,dr,dH);//CON R1xR2xH
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract);

	//2.本体
	m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

	m_pPart->SetOrgPoint(ptCen);
	m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
	m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
	m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("dR"),dR);
	m_pPart->GetSpecialtyData()->SetAt(_T("dr"),dr);
	m_pPart->GetSpecialtyData()->SetAt(_T("dt"),dt);
	m_pPart->GetSpecialtyData()->SetAt(_T("dBomt"),dBomt);
	m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
	
	m_pPart->Create();
	return true;
}

AcDbPolyline* FormatPolyline(const AcGePoint3d& ptCen,double dL,double dW)
{
	AcDbPolyline* pPl = new AcDbPolyline;

	AcGePoint3d ptGe = ptCen;
	ptGe -= AcGeVector3d::kXAxis * 0.5 * dL;
	ptGe += AcGeVector3d::kYAxis * 0.5 * dW;

	pPl->addVertexAt(0,ptGe.convert2d(AcGePlane::kXYPlane));

	ptGe += AcGeVector3d::kXAxis * dL;
	pPl->addVertexAt(1,ptGe.convert2d(AcGePlane::kXYPlane));

	ptGe -= AcGeVector3d::kYAxis * dW;
	pPl->addVertexAt(2,ptGe.convert2d(AcGePlane::kXYPlane));

	ptGe -= AcGeVector3d::kXAxis * dL;
	pPl->addVertexAt(3,ptGe.convert2d(AcGePlane::kXYPlane));

	ptGe += AcGeVector3d::kYAxis * dW;
	pPl->addVertexAt(4,ptGe.convert2d(AcGePlane::kXYPlane));

	pPl->setClosed(Adesk::kTrue);
	return pPl;
}

//方台井
bool AecDbX3dPartEntity::SetAsWell(const AcGePoint3d& ptCen,double dL,double dW,double dL1,double dW1,double dH,double dt,double dBomThick,const AcGeVector2d& vtOffset,bool bHasHole/* = false*/)
{
	if (!bHasHole)
	{
		AssertWriteEnabled();
		m_pPart->RemoveAll3dSolidRec();
	}

	//洞口编号默认不显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,TRUE);

	m_pPart->SetName(_T("方台井"));

	AcDbPolyline* pplTop = NULL,*pplBom = NULL;
	pplTop = FormatPolyline(ptCen,dL,dW);
	pplBom = FormatPolyline(ptCen,dL1,dW1);

	if (pplBom == NULL || pplTop == NULL)
		return false;

	CString sTopPts,sBomPts;
	CoreTools::PolylineToString(pplTop,sTopPts,true);
	CoreTools::PolylineToString(pplBom,sBomPts,true);

	double dElBom = ptCen.z;
	//double dBomThick = dt;

	//TEST
	//AddToModelSpace(pplTop);
	//AddToModelSpace(pplBom);
	//2D
	SetDrawable2d(pplTop);
	SetDrawable2d(pplBom);
	delete pplBom;
	delete pplTop;

	//3D
	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	pXSolid->CreateLoftReducer(sTopPts,sBomPts,dElBom - dH,dH,dt,dBomThick);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);

	//2.本体
	m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

	AcGePoint3d ptOrg = ptCen;

	m_pPart->SetOrgPoint(ptOrg);
	m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
	m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
	m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("TopScr"),sTopPts);
	m_pPart->GetSpecialtyData()->SetAt(_T("BomScr"),sBomPts);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("nShape"),(int)eRect);//方
	m_pPart->GetSpecialtyData()->SetAt(_T("dL"),dL);
	m_pPart->GetSpecialtyData()->SetAt(_T("dW"),dW);
	m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("dL1"),dL1);
	m_pPart->GetSpecialtyData()->SetAt(_T("dW1"),dW1);
	m_pPart->GetSpecialtyData()->SetAt(_T("dt"),dt);
	m_pPart->GetSpecialtyData()->SetAt(_T("dBomt"),dBomThick);


	m_pPart->Create();
	return true;
}

//盆板添加上方下圆结构
bool AecDbX3dPartEntity::SetAsWell(const AcGePoint3d& ptCen,double dL,double dW,double dr,double dH,double dt,double dBomT,double dXOffset,bool bHasHole/* = false*/)
{
	if (!bHasHole)
	{
		AssertWriteEnabled();
		m_pPart->RemoveAll3dSolidRec();
	}

	//洞口编号默认不显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,TRUE);

	m_pPart->SetName(_T("方圆井"));

	//2D
	AcDbPolyline* pPl = FormatPolyline(ptCen,dL,dW);
	if (pPl != NULL)
	{
		SetDrawable2d(pPl);
		delete pPl;
	}
	SetDrawable2d(ptCen,dr,AcGeVector3d::kZAxis);

	//3D
	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	AcGeVector3d vtMove(0,0,1);
	if ( pXSolid->CreateTydf(ptCen,vtMove,dr,dL,dW,dH + dBomT,dXOffset,TRUE) )
	{
		m_pPart->AddX3dSolid(pXSolid);

		pXSolid = new AcDbX3dSolid;
		if (pXSolid->CreateTydf(ptCen,vtMove,dr - dt,dL - 2.0 * dt,dW - 2.0 * dt,dH,dXOffset,TRUE) )
		{
			m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract);
		}

		//2.本体
		m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

		m_pPart->SetOrgPoint( AcGePoint3d(ptCen.x,ptCen.y,ptCen.z) );
		m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
		m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
		m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

		//序列化BIM数据
		m_pPart->GetSpecialtyData()->SetAt(_T("nShape"),(int)eRect);//方
		m_pPart->GetSpecialtyData()->SetAt(_T("dL"),dL);
		m_pPart->GetSpecialtyData()->SetAt(_T("dW"),dW);
		m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
		m_pPart->GetSpecialtyData()->SetAt(_T("dr"),dr);
		m_pPart->GetSpecialtyData()->SetAt(_T("dt"),dt);
		m_pPart->GetSpecialtyData()->SetAt(_T("dBomT"),dBomT);
		m_pPart->GetSpecialtyData()->SetAt(_T("dXOffset"),dXOffset);

		m_pPart->Create();
		return true;
	}
	else
	{
		delete pXSolid;
	}
	return false;
}

//集水坑井
bool AecDbX3dPartEntity::SetAsWell(const AcGePoint3d& ptCen,double dL,double dW,double dH,float dSlabThick,double dBomThick,double dAng,bool bHasHole/* = false*/)
{
	if (!bHasHole)
	{
		AssertWriteEnabled();
		m_pPart->RemoveAll3dSolidRec();
	}

	//洞口编号默认不显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,TRUE);

	m_pPart->SetName(_T("集水坑井"));

	double dLX = ( dBomThick + dH * tan(dAng) ) * 2.0 + dL;
	double dLY = ( dBomThick + dH * tan(dAng) ) * 2.0 + dW;

	double dBLx = dBomThick * 2.0 + dL;
	double dBLy = dBomThick * 2.0 + dW;

	AcGeVector3d vtZ(0,0,1);
	AcGePoint3d ptNewOrg;
	ptNewOrg.set(ptCen.x,ptCen.y,ptCen.z);

	//2d
	AcDbPolyline* pPl = FormatPolyline(ptCen,dL,dW);
	if (pPl != NULL)
	{
		SetDrawable2d(pPl);
		delete pPl;
	}

	//1.为宿主的开孔
	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	pXSolid->Create(AcDbX3dSolid::kBox,ptNewOrg,vtZ,3,dL,dW,dSlabThick);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract,true);

	//2.本体
	m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

	//3.创建四方台
	AcDbPolyline* pplTop = NULL,*pplBom = NULL;
	pplTop = FormatPolyline(ptNewOrg,dLX,dLY);

	//old
	//pplBom = FormatPolyline(ptNewOrg,dLX - 2.0 * dH,dLY - 2.0 * dH);

	pplBom = FormatPolyline(ptNewOrg,dBLx,dBLy);

	if (pplBom == NULL || pplTop == NULL)
	{
		return false;
	}

	CString sTopPts,sBomPts;
	CoreTools::PolylineToString(pplTop,sTopPts,true);
	CoreTools::PolylineToString(pplBom,sBomPts,true);

	pXSolid = new AcDbX3dSolid;
	vtZ.set(0,0,-1);

	ptNewOrg.z -= 0.5 * dSlabThick;//到达池底
	pXSolid->CreateLoftReducer(sTopPts,sBomPts,ptNewOrg.z - dH,dH,0.0,0.0);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);

	//4.挖去井口
	pXSolid = new AcDbX3dSolid;
	ptNewOrg.z -= 0.5 * (dH - dBomThick);
	pXSolid->Create(AcDbX3dSolid::kBox,ptNewOrg,vtZ,3,dL,dW,dH - dBomThick);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract);

	m_pPart->SetOrgPoint( ptCen );
	m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
	m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
	m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("dL"),dL);
	m_pPart->GetSpecialtyData()->SetAt(_T("dW"),dW);
	m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("dSlabThick"),dSlabThick);
	m_pPart->GetSpecialtyData()->SetAt(_T("dBomThick"),dBomThick);
	m_pPart->GetSpecialtyData()->SetAt(_T("Ang"),dAng);

	m_pPart->Create();
	return true;
}

void AecDbX3dPartEntity::ResetLablePoint()
{
	assertWriteEnabled();

	AcGePoint3d ptCen;
	ptCen = m_pPart->GetOrgPoint(true);

	AcGePoint3d ptNewOrg,ptOn;
	ptNewOrg.set(ptCen.x,ptCen.y,ptCen.z);

	AcGeVector3d vtDir(1,0,0);
	m_pPart->GetSpecialtyData()->GetAt(_T("vtDir"),vtDir);

	vtDir.normalize();
	vtDir *= 3.5 * 100.0;
	ptOn = ptNewOrg;
	ptOn += vtDir;

	int nVt = 0;
	if (m_pPart->GetSpecialtyData()->HasKey(KEY_NOPOS,nVt) )
	{
		m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptOn);
	}
}

//在盆板开洞矩形洞,原始定义位置
bool AecDbX3dPartEntity::SetAsHole(const AcGePoint3d& ptCen,double dL,double dW,double dH,const AcGeVector3d& vtZ,BOOL bHasNozz/* = FALSE*/)
{
	AssertWriteEnabled();

	//洞口编号默认显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,FALSE);

	m_pPart->RemoveAll3dSolidRec();
	m_pPart->SetName(_T("开洞"));

	m_drawable2d.RemoveEdage();

	AcGePoint3d ptNewOrg,ptOn;
	ptNewOrg.set(ptCen.x,ptCen.y,ptCen.z);

	AcGeVector3d vtDir = vtZ;
	vtDir.normalize();
	vtDir *= 3.5 * 100.0;
	ptOn = ptNewOrg;
	ptOn += vtDir;

	if (m_pPart != NULL)
		m_pPart->Transformby(ptOn);
	m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptOn);

	BOOL bAsWell = FALSE;
	m_pPart->GetSpecialtyData()->GetAt(KEY_SETASWELL, bAsWell);
	
	double dL3 = 1.05 * dH;//放大.05
	int nDir = 0;

	//2D
	AcGeLine3d lnZ;
	lnZ.set(ptCen,vtZ);
	if ( AcGePlane::kXYPlane.isParallelTo(lnZ) ) //洞水平
	{
		nDir = 0;//墙开洞
		AcGeVector3d vtZV = vtZ;
		vtZV.rotateBy(-PI / 2.0,AcGeVector3d::kZAxis);

		//左线
		AcGePoint3d ptGe[3],pt0,pt1;
		ptGe[0] = ptCen;
		ptGe[0] -= vtZV * 0.5 * dL;
		ptGe[0] += vtZ * 0.5 * dH;
		ptGe[1] = ptGe[0];
		ptGe[1] -= vtZ * dH;
		SetDrawable2d(ptGe[0],ptGe[1]);

 		//右线
		pt0 = ptGe[0];
		pt1 = ptGe[1];
		ptGe[0] += vtZV * dL;
		ptGe[1] += vtZV * dL;
		SetDrawable2d(ptGe[0],ptGe[1]);

		//X线
		SetDrawable2d(pt0, ptGe[1],TRUE);
		SetDrawable2d(pt1, ptGe[0],TRUE);
	}
	else if (AcGePlane::kXYPlane.isPerpendicularTo(lnZ))
	{
		nDir = 1;//板开洞
		AecComplexCurve cpcur;
		AecEqui::AecCurveElement el;
		memset(&el,0,sizeof(AecEqui::AecCurveElement));

		AcDbPolyline* pPl = FormatPolyline(ptCen,dL,dW);
		if (pPl != NULL)
		{
			SetDrawable2d(pPl);
			delete pPl;
		}

		//< 线
		AcGePoint3d ptGe[5],pt1,pt2;
		ptGe[1] = ptCen;
		ptGe[1] -= AcGeVector3d::kXAxis * 0.5 * dL;
		ptGe[1] += AcGeVector3d::kYAxis * 0.5 * dW;

		ptGe[0] = ptGe[1];
		ptGe[0] += AcGeVector3d::kXAxis * dL;

		ptGe[2] = ptGe[1];
		ptGe[2] -= AcGeVector3d::kYAxis * dW;

		pt1 = ptGe[1];
		pt1.rotateBy(PI / 36.0, AcGeVector3d::kZAxis, ptGe[0]);

		pt2 = ptGe[1];
		pt2.rotateBy(-PI / 36.0, AcGeVector3d::kZAxis, ptGe[2]);

		AcGeLine3d ln1(pt1, ptGe[0]);
		AcGeLine3d ln2(pt2, ptGe[2]);

		pt1 = ptGe[1];
		ln1.intersectWith(ln2, ptGe[1]);
		pt2 = ptGe[1];

		pPl = FormatPolyline(ptGe,3);
		if (pPl != NULL)
		{
			if (!bAsWell)
			{
				SetDrawable2d(pPl);
			}
			delete pPl;

			CString sForUse;
			m_pPart->GetSpecialtyData()->GetAt(KEY_FORUSE, sForUse);

			if (sForUse.Find(_T("人孔")) != -1)
			{
				//人孔填充
				ptGe[1] = pt1;
				ptGe[3] = pt2;
				ptGe[4] = ptGe[0];

				SetDrawable2d(ptGe, 5,HATCH_LOOP);
			}
		}
	}
	else
	{
		//...其他空间方向开孔
	}

	//1.开孔
	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	pXSolid->Create(AcDbX3dSolid::kBox,ptNewOrg,vtZ,3,dL,dW,dL3);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract,true);
	m_pPart->SetBoolOperFor(AcDb::kBoolSubtract);

	m_pPart->SetOrgPoint( AcGePoint3d(ptCen.x,ptCen.y,ptCen.z) );
	m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
	m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
	m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("nShape"),(int)eRect);//方
	m_pPart->GetSpecialtyData()->SetAt(_T("dL"),dL);
	m_pPart->GetSpecialtyData()->SetAt(_T("dW"),dW);
	m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("bHasNozz"),bHasNozz);

	//统一设置开洞的inf
	m_pPart->GetSpecialtyData()->SetAt(_T("vtDir"),vtZ);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dL"),dL);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dW"),dW);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dT"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dX"),ptCen.x);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dY"),ptCen.y);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dZ"),ptCen.z);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nDir"),nDir);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nH"),1);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nV"),1);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dHSpace"),0.0);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dVSpace"),0.0);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_bAddHoleCase"),bHasNozz);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nShape"),(int)eRect);//RECT

	m_pPart->SetActiveInf(CPoint(0,0));
	m_pPart->Create();
	return true;
}

//盆板圆形洞口,原始定义位置
bool AecDbX3dPartEntity::SetAsHole(const AcGePoint3d& ptCen,double dRad,double dH,const AcGeVector3d& vtZ,BOOL bHasNozz/* = FALSE*/)
{
	AssertWriteEnabled();

	//洞口编号默认显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,FALSE);

	m_pPart->RemoveAll3dSolidRec();
	m_pPart->SetName(_T("开洞"));

	m_drawable2d.RemoveEdage();

	AcGePoint3d ptNewOrg;
	ptNewOrg.set(ptCen.x,ptCen.y,ptCen.z);
	double dL3 = 1.05 * dH;//斜边放大

	AcGeVector3d vtDir = vtZ;
	vtDir.normalize();
	vtDir *= 3.5 * 100.0;
	AcGePoint3d ptOn = ptNewOrg;
	ptOn += vtDir;

	if (m_pPart != NULL)
		m_pPart->Transformby(ptOn);
	m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptOn);

	AcGeVector3d vtL = vtZ;
	vtL.normalize();
	//2D
	int nDir = 0;
	AcGeLine3d lnZ;
	lnZ.set(ptCen,vtZ);
	if ( AcGePlane::kXYPlane.isParallelTo(lnZ) ) //洞水平
	{
		nDir = 0;//墙体开洞
		AcGeVector3d vtZV = vtZ;
		vtZV.normalize();
		vtZV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

		AcGePoint3d ptGe[2];
		ptGe[0] = ptCen;
		ptGe[0] -= vtZV * dRad;
		ptGe[0] += vtL * 0.5 * dH;

		ptGe[1] = ptGe[0];
		ptGe[1] -= vtL * dH;

		SetDrawable2d(ptGe[0],ptGe[1]);

		ptGe[0] += vtZV * 2.0 * dRad;
		ptGe[1] += vtZV * 2.0 * dRad;
		SetDrawable2d(ptGe[0],ptGe[1]);

		//中心线
		ptGe[0] = ptCen;
		ptGe[0] += vtL * (0.5 * dH + 2.5);
		ptGe[1] = ptGe[0];
		ptGe[1] -= vtL * (dH + 5.0);
		SetDrawable2d(ptGe[0],ptGe[1]);
	}
	else if (AcGePlane::kXYPlane.isPerpendicularTo(lnZ))
	{
		nDir = 1;//板开洞
		//2d
		SetDrawable2d(ptCen,dRad,vtL);

		//判断是否是人孔
		CString sForUse;
		m_pPart->GetSpecialtyData()->GetAt(KEY_FORUSE, sForUse);

		if (sForUse.Find(_T("人孔")) != -1)
		{
			AcGePoint3d ptGe[5];

			ptGe[0] = ptCen;
			ptGe[0].y += dRad;

			ptGe[1] = ptCen;
			ptGe[1].x -= dRad;

			ptGe[2] = ptCen;
			ptGe[2].y -= dRad;

			ptGe[3] = ptCen;
			ptGe[3].x -= 0.75 * dRad;

			ptGe[4] = ptGe[0];

			AecComplexCurve cpcur;
			m_drawable2d.GetEdage(cpcur);

			AecEqui::AecCurveElement el;
			memset(&el, 0, sizeof(AecEqui::AecCurveElement));
			el.gsMark = HATCH_LOOP;

			el.ptGe[0] = ptGe[0];
			el.ptGe[1] = ptGe[1];
			el.ptGe[2] = ptGe[2];

			cpcur.append(el);

			el.ptGe[0] = ptGe[2];
			el.ptGe[1] = ptGe[3];
			el.ptGe[2] = ptGe[4];

			cpcur.append(el);

			m_drawable2d.SetEdage(cpcur);
		}
	}
	else
	{
		//...
	}

	//1.开孔
	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	pXSolid->Create(AcDbX3dSolid::kCylinder,ptNewOrg,vtL,2,dRad,dL3);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract,true);
	m_pPart->SetBoolOperFor(AcDb::kBoolSubtract);
	m_pPart->Create();

	m_pPart->SetOrgPoint( AcGePoint3d(ptCen.x,ptCen.y,ptCen.z) );
	m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
	m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
	m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("nShape"),(int)eCircle);//圆
	m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("dRad"),dRad);
	m_pPart->GetSpecialtyData()->SetAt(_T("bHasNozz"),bHasNozz);

	//统一设置开洞的inf
	m_pPart->GetSpecialtyData()->SetAt(_T("vtDir"),vtZ);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dL"),dRad);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dW"),dRad);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dT"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dX"),ptCen.x);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dY"),ptCen.y);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dZ"),ptCen.z);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nDir"),nDir);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nH"),1);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nV"),1);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dHSpace"),0.0);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dVSpace"),0.0);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_bAddHoleCase"),FALSE);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nShape"),1);//CIRCLE

	m_pPart->SetActiveInf(CPoint(0,0));
	m_pPart->Create();
	return true;
}

//盆板异型洞,原始定义位置
bool AecDbX3dPartEntity::SetAsHole(const AcGePoint3d& ptCen,LPCTSTR pszPoint2dsTop,double dH,const AcGeVector3d& vtZ)
{
	AssertWriteEnabled();

	//洞口编号默认显示
	//GetSpecialtyData()->SetAt(KEY_HIDENO,FALSE);

	m_pPart->RemoveAll3dSolidRec();
	m_pPart->SetName(_T("开洞"));

	m_drawable2d.RemoveEdage();

	AcGeVector3d vtDir = vtZ;
	vtDir.normalize();
	vtDir *= 3.5 * 100.0;
	AcGePoint3d ptOn = ptCen;
	ptOn += vtDir;

	if (m_pPart != NULL)
		m_pPart->Transformby(ptOn);
	m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptOn);

	double dL = dH;
	AcGePoint3d ptNewOrg = ptCen;
	int nDir = 0;

	AcGeLine3d lnZ;
	lnZ.set(ptCen,vtZ);
	if ( AcGePlane::kXYPlane.isParallelTo(lnZ) ) //洞水平
	{
		nDir = 0;
		AcDbPolyline* pPl = CoreTools::StringToPolyline(pszPoint2dsTop);
		if (pPl != NULL)
		{
			AcDbExtents ext;
			pPl->getGeomExtents(ext);

			dL = ext.maxPoint().x - ext.minPoint().x;

			nDir = 0;//墙体开洞
			AcGeVector3d vtZV = vtZ;
			vtZV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vtZV.normalize();

			AcGeVector3d vtZB= vtZ;
			vtZB.normalize();

			AcGePoint3d ptGe[2];
			ptGe[0] = ptCen;
			ptGe[0] -= vtZV * 0.5 * dL;
			ptGe[0] += vtZB * 0.5 * dH;
			ptGe[1] = ptGe[0];
			ptGe[1] -= vtZ * dH;

			SetDrawable2d(ptGe[0],ptGe[1]);

			ptGe[0] += vtZV * dL;
			ptGe[1] += vtZV * dL;
			SetDrawable2d(ptGe[0],ptGe[1]);

			delete pPl;
		}
	}
	else if (AcGePlane::kXYPlane.isPerpendicularTo(lnZ))
	{
		nDir = 1;
		//2d
		AcDbPolyline* pPl = CoreTools::StringToPolyline(pszPoint2dsTop);
		if (pPl != NULL)
		{
			SetDrawable2d(pPl);
			delete pPl;
			//TEST
			//pPl->setColorIndex(1);
			//CoreTools::AddToModelSpace(pPl);
		}
		else
			return false;
	}
	else
	{
		//...
		return false;
	}

	//1.开孔
	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	vtDir.normalize();

	CString sPoints = pszPoint2dsTop;
	AcDbPolyline* pPl = CoreTools::StringToPolyline(pszPoint2dsTop);
	if (pPl != NULL)
	{
		AcGePlane plan;
		AcDb::Planarity epan;
		pPl->getPlane(plan,epan);

		AcGePoint3d pClst = plan.closestPointTo(ptNewOrg);

		AcGeVector3d vt = ptNewOrg - pClst;
		AcGeMatrix3d xform;
		xform.setToTranslation(vt);
		pPl->transformBy(xform);

		sPoints = _T("");
		CoreTools::PolylineToString(pPl,sPoints);

		delete pPl;
	}

	//以中心两方向减
	pXSolid->CreateExtrude(ptNewOrg,vtZ,sPoints,0.5 * dH,0.0);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract,true);
	m_pPart->SetBoolOperFor(AcDb::kBoolSubtract);

	pXSolid = new AcDbX3dSolid;
	pXSolid->CreateExtrude(ptNewOrg,-vtZ,sPoints,0.5 * dH,0.0);
	m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract,true);
	m_pPart->SetBoolOperFor(AcDb::kBoolSubtract);

	//TEST
	/*AcDb3dSolid* pSolid = pXSolid->GetDraw3dSolid();
	if (pSolid != NULL)
	{
		pSolid->setColorIndex(1);
		AddToModelSpace(pSolid);
	}*/

	m_pPart->SetOrgPoint(ptNewOrg);
	m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
	m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
	m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	m_pPart->GetSpecialtyData()->SetAt(_T("nShape"),(int)eUserDef);//自定义
	m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("Points"),pszPoint2dsTop);

	//统一设置开洞的inf
	m_pPart->GetSpecialtyData()->SetAt(_T("vtDir"),vtZ);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dL"),dL);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dW"),dL);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dT"),dH);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dX"),ptCen.x);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dY"),ptCen.y);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dZ"),ptCen.z);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nDir"),nDir);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nH"),1);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nV"),1);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dHSpace"),0.0);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_dVSpace"),0.0);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_bAddHoleCase"),FALSE);
	m_pPart->GetSpecialtyData()->SetAt(_T("m_nShape"),2);//CIRCLE

	m_pPart->SetActiveInf(CPoint(0,0));
	m_pPart->Create();

	return true;
}

bool AecDbX3dPartEntity::SetAsPipe(const AcGePoint3d& ptCen,int nShape,double dH,double dW,double dT,double dL,BOOL bLRExt,double dEx1,double dEx2,const AcGeVector3d& vtDir)
{
	AssertWriteEnabled();

	m_pPart->RemoveAll3dSolidRec();
	m_pPart->SetName(_T("套管"));

	//二次修改不可以 Reset
	//复制需要Rest
	//m_pPart->ResetMove();
	//m_pPart->ResetRotate(X);
	//m_pPart->ResetRotate(Y);
	//m_pPart->ResetRotate(Z);

	m_drawable2d.RemoveEdage();

	AcGeVector3d vtDirT = vtDir;
	vtDirT.normalize();
	vtDirT *= 3.5 * 100.0;
	AcGePoint3d ptOn = ptCen;
	ptOn += vtDirT;

	if (m_pPart != NULL)
		m_pPart->Transformby(ptOn);
	m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS,ptOn);

	AcDbX3dSolid* pXSolid = NULL;
	if (nShape == 0)//circle
	{
		if (vtDir.isParallelTo(AcGeVector3d::kZAxis))//开口平行Z
		{
			vtDirT.normalize();
			SetDrawable2d(ptCen,0.5 * dH,vtDirT);//Circle
		}
		else//
		{
			AcGeLine3d ln3d;
			ln3d.set(ptCen,vtDir);

			if (AcGePlane::kXYPlane.isParallelTo(ln3d))//开口平行 XY面
			{
				//双线
				vtDirT.normalize();
				SetDrawable2d(ptCen,0.5 * dH,dL,vtDirT);//-||-
			}
		}

		vtDirT.normalize();

		//CYL RxH 为宿主结构准备的solid减
		pXSolid = new AcDbX3dSolid;
		pXSolid->Create(AcDbX3dSolid::kCylinder,ptCen,vtDir,2,0.5 * dH,dL);
		m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract,true);

		//TEST
		/*
		AcDb3dSolid* pSolid = NULL;
		pSolid = pXSolid->GetDraw3dSolid();
		if ( pSolid != NULL)
		{
			pSolid->setColorIndex(3);
			AddToModelSpace(pSolid);
		}*/

		//本体
		m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

		//圆管rxtxH dL管长
		if (bLRExt)
		{
			AcGePoint3d ptCenT = ptCen;
			double dL1 = (0.5 * dL + dEx1);
			ptCenT -= vtDirT * 0.5 * dL1;

			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kPipe,ptCenT,vtDir,3,0.5 * dH,dT,dL1);
			m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

			ptCenT = ptCen;
			double dL2 = (0.5 * dL + dEx2);
			ptCenT += vtDirT * 0.5 * dL2;

			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kPipe,ptCenT,vtDir,3,0.5 * dH,dT,dL2);
			m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
		}
		else
		{
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kPipe,ptCen,vtDir,3,0.5 * dH,dT,dL);
			m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
		}

		m_pPart->SetOrgPoint(ptCen);
		m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
		m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
		m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

		//序列化BIM数据
		m_pPart->GetSpecialtyData()->SetAt(_T("nShape"),(int)eCircle);//自定义
		m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dL);
		m_pPart->GetSpecialtyData()->SetAt(_T("dD"),dH);
		m_pPart->GetSpecialtyData()->SetAt(_T("dT"),dT);
		m_pPart->GetSpecialtyData()->SetAt(_T("bExt"),bLRExt);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx1"),dEx1);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx2"),dEx2);
		m_pPart->GetSpecialtyData()->SetAt(_T("vtDir"),vtDir);

		m_pPart->Create();
	}
	else//rect
	{
		if (vtDir.isParallelTo(AcGeVector3d::kZAxis))//水平
		{
			AcDbPolyline* pPl = FormatPolyline(ptCen,dW,dH);
			if (pPl != NULL)
			{
				SetDrawable2d(pPl);
				delete pPl;
			}
		}
		else//垂直
		{
			AcGeLine3d ln3d;
			ln3d.set(ptCen,vtDir);

			if (AcGePlane::kXYPlane.isParallelTo(ln3d))//XY面
			{
				//双线
				vtDirT.normalize();
				SetDrawable2d(ptCen,0.5 * dW,dL,vtDirT);
			}
		}

		pXSolid = new AcDbX3dSolid;
		pXSolid->Create(AcDbX3dSolid::kBox,ptCen,vtDir,3,dW,dH,dL);
		m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolSubtract,true);

		//本体
		m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

		//BOX LxWxH 为宿主结构准备的solid减
		if (bLRExt)
		{
			AcGePoint3d ptCenT = ptCen;
			double dL1 = (0.5 * dL + dEx1);
			ptCenT -= vtDirT * 0.5 * dL1;

			//kRectTube
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kRectTube,ptCenT,vtDir,4,dW,dH,dT,dL1);
			m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

			ptCenT = ptCen;
			double dL2 = (0.5 * dL + dEx2);
			ptCenT += vtDirT * 0.5 * dL2;

			//kRectTube
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kRectTube,ptCenT,vtDir,4,dW,dH,dT,dL2);
			m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
		}
		else
		{
			//kRectTube
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kRectTube,ptCen,vtDir,4,dW,dH,dT,dL);
			m_pPart->AddX3dSolid(pXSolid,AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
		}

		m_pPart->SetOrgPoint(ptCen);
		m_pPart->SetAxis(X,AcGeVector3d::kXAxis);
		m_pPart->SetAxis(Y,AcGeVector3d::kYAxis);
		m_pPart->SetAxis(Z,AcGeVector3d::kZAxis);

		//序列化BIM数据
		m_pPart->GetSpecialtyData()->SetAt(_T("nShape"),(int)eRect);//自定义
		m_pPart->GetSpecialtyData()->SetAt(_T("dH"),dL);
		m_pPart->GetSpecialtyData()->SetAt(_T("dL"),dW);
		m_pPart->GetSpecialtyData()->SetAt(_T("dW"),dH);
		m_pPart->GetSpecialtyData()->SetAt(_T("dT"),dT);
		m_pPart->GetSpecialtyData()->SetAt(_T("bExt"),bLRExt);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx1"),dEx1);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx2"),dEx2);
		m_pPart->GetSpecialtyData()->SetAt(_T("vtDir"),vtDir);

		m_pPart->Create();
	}
	return true;
}

bool AecDbX3dPartEntity::SetAsPipe(const AcGePoint3d &ptCen, int nShape, double dH, double dW, double dT, double dL, BOOL bLRExt, double dEx1, double dEx2, const AcGeVector3d &vtDir,const AcGeVector3d& vtWall)
{
	AssertWriteEnabled();

	m_pPart->RemoveAll3dSolidRec();
	m_pPart->SetName(_T("套管"));

	//二次修改不可以 Reset
	//复制需要Rest
	//m_pPart->ResetMove();
	//m_pPart->ResetRotate(X);
	//m_pPart->ResetRotate(Y);
	//m_pPart->ResetRotate(Z);

	m_drawable2d.RemoveEdage();

	AcGeVector3d vtDirT = vtDir;
	vtDirT.normalize();
	vtDirT *= 3.5 * 100.0;
	AcGePoint3d ptOn = ptCen;
	ptOn += vtDirT;

	if (m_pPart != NULL)
		m_pPart->Transformby(ptOn);
	m_pPart->GetSpecialtyData()->SetAt(KEY_NOPOS, ptOn);

	AcDbX3dSolid *pXSolid = NULL;
	if (nShape == 0)//circle
	{
		if (vtDir.isParallelTo(AcGeVector3d::kZAxis))//开口平行Z
		{
			vtDirT.normalize();
			SetDrawable2d(ptCen, 0.5 * dH, vtDirT);//Circle
		}
		else//
		{
			AcGeLine3d ln3d;
			ln3d.set(ptCen, vtDir);

			if (AcGePlane::kXYPlane.isParallelTo(ln3d))//开口平行 XY面
			{
				//双线
				vtDirT.normalize();
				SetDrawable2d(ptCen, 0.5 * dH, dL, vtDirT,vtWall);//-||-
			}
		}

		vtDirT.normalize();

		//CYL RxH 为宿主结构准备的solid减
		pXSolid = new AcDbX3dSolid;
		pXSolid->Create(AcDbX3dSolid::kCylinder, ptCen, vtDir, 2, 0.5 * dH, dL);
		m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolSubtract, true);

		//TEST
		/*
		AcDb3dSolid* pSolid = NULL;
		pSolid = pXSolid->GetDraw3dSolid();
		if ( pSolid != NULL)
		{
			pSolid->setColorIndex(3);
			AddToModelSpace(pSolid);
		}*/

		//本体
		m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

		double dAng = vtDir.angleTo(vtWall);
		double dX = 0.0;

		KTTempTol tol(1.e-3);
		if (!vtDir.isPerpendicularTo(vtWall))
		{
			dX = fabs(0.5 * dH * tan(dAng));
		}

		//圆管rxtxH dL管长
		if (bLRExt)
		{
			AcGePoint3d ptCenT = ptCen;
			double dL1 = (0.5 * dL + dEx1 + dX);
			ptCenT -= vtDirT * 0.5 * dL1;

			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kPipe, ptCenT, vtDir, 3, 0.5 * dH, dT, dL1);
			m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

			ptCenT = ptCen;
			double dL2 = (0.5 * dL + dEx2 + dX);
			ptCenT += vtDirT * 0.5 * dL2;

			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kPipe, ptCenT, vtDir, 3, 0.5 * dH, dT, dL2);
			m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

			/*if (!vtDir.isPerpendicularTo(vtWall))
			{
				AcGeVector3d vtY = vtDir.orthoProject(vtWall);
				vtY.normalize();

				ptCenT = ptCen;
				dL1 = (0.5 * dL);
				ptCenT += vtDirT * 0.5 * dL1;

				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kPipe, ptCenT, vtY, 3, 0.5 * dH, dT, dL1);
				AddToModelSpace(pXSolid->GetDraw3dSolid());
				delete pXSolid;

				//m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolSubtract);
				//m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

				ptCenT = ptCen;
				double dL2 = (0.5 * dL);
				ptCenT -= vtDirT * 0.5 * dL2;

				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kPipe, ptCenT, -vtY, 3, 0.5 * dH, dT, dL2);
				AddToModelSpace(pXSolid->GetDraw3dSolid());
				delete pXSolid;
				//m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolSubtract);
				//m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
			}*/
		}
		else
		{
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kPipe, ptCen, vtDir, 3, 0.5 * dH, dT, dL + 2.0 * dX);
			m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

			/*if (!vtDir.isPerpendicularTo(vtWall))
			{
				AcGePoint3d ptCenT = ptCen;
				double dL1 = (0.5 * dL + dX + 3 * dX);

				AcGeVector3d vtY = vtDir.orthoProject(vtWall);
				vtY.normalize();

				ptCenT = ptCen;
				ptCenT += vtDirT * 0.5 * dL1;

				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kCylinder, ptCenT, vtY, 3, dH, dX);
				//AddToModelSpace(pXSolid->GetDraw3dSolid());
				//delete pXSolid;
				m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolSubtract);
				m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

				ptCenT = ptCen;
				double dL2 = (0.5 * dL + dX + 3 * dX);
				ptCenT -= vtDirT * 0.5 * dL2;

				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kCylinder, ptCenT, -vtY, 3, dH, dX);
				//AddToModelSpace(pXSolid->GetDraw3dSolid());
				//delete pXSolid;
				m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolSubtract);
				m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
			}*/
		}

		m_pPart->SetOrgPoint(ptCen);
		m_pPart->SetAxis(X, AcGeVector3d::kXAxis);
		m_pPart->SetAxis(Y, AcGeVector3d::kYAxis);
		m_pPart->SetAxis(Z, AcGeVector3d::kZAxis);

		//序列化BIM数据
		m_pPart->GetSpecialtyData()->SetAt(_T("nShape"), (int)eCircle);//自定义
		m_pPart->GetSpecialtyData()->SetAt(_T("dH"), dL);
		m_pPart->GetSpecialtyData()->SetAt(_T("dD"), dH);
		m_pPart->GetSpecialtyData()->SetAt(_T("dT"), dT);
		m_pPart->GetSpecialtyData()->SetAt(_T("bExt"), bLRExt);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx1"), dEx1);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx2"), dEx2);
		m_pPart->GetSpecialtyData()->SetAt(_T("vtDir"), vtDir);
		m_pPart->GetSpecialtyData()->SetAt(_T("vtWall"), vtWall);

		m_pPart->Create();
	}
	else//rect
	{
		if (vtDir.isParallelTo(AcGeVector3d::kZAxis))//水平
		{
			AcDbPolyline *pPl = FormatPolyline(ptCen, dW, dH);
			if (pPl != NULL)
			{
				SetDrawable2d(pPl);
				delete pPl;
			}
		}
		else//垂直
		{
			AcGeLine3d ln3d;
			ln3d.set(ptCen, vtDir);

			if (AcGePlane::kXYPlane.isParallelTo(ln3d))//XY面
			{
				//双线
				vtDirT.normalize();
				SetDrawable2d(ptCen, 0.5 * dW, dL, vtDirT,vtWall);
			}
		}

		pXSolid = new AcDbX3dSolid;
		pXSolid->Create(AcDbX3dSolid::kBox, ptCen, vtDir, 3, dW, dH, dL);
		m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolSubtract, true);

		//本体
		m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

		//BOX LxWxH 为宿主结构准备的solid减
		if (bLRExt)
		{
			AcGePoint3d ptCenT = ptCen;
			double dL1 = (0.5 * dL + dEx1);
			ptCenT -= vtDirT * 0.5 * dL1;

			//kRectTube
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kRectTube, ptCenT, vtDir, 4, dW, dH, dT, dL1);
			m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);

			ptCenT = ptCen;
			double dL2 = (0.5 * dL + dEx2);
			ptCenT += vtDirT * 0.5 * dL2;

			//kRectTube
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kRectTube, ptCenT, vtDir, 4, dW, dH, dT, dL2);
			m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
		}
		else
		{
			//kRectTube
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kRectTube, ptCen, vtDir, 4, dW, dH, dT, dL);
			m_pPart->AddX3dSolid(pXSolid, AcDb::kBoolUnite);
			m_pPart->SetBoolOperFor(AcDb::kBoolUnite);
		}

		m_pPart->SetOrgPoint(ptCen);
		m_pPart->SetAxis(X, AcGeVector3d::kXAxis);
		m_pPart->SetAxis(Y, AcGeVector3d::kYAxis);
		m_pPart->SetAxis(Z, AcGeVector3d::kZAxis);

		//序列化BIM数据
		m_pPart->GetSpecialtyData()->SetAt(_T("nShape"), (int)eRect);//自定义
		m_pPart->GetSpecialtyData()->SetAt(_T("dH"), dL);
		m_pPart->GetSpecialtyData()->SetAt(_T("dL"), dW);
		m_pPart->GetSpecialtyData()->SetAt(_T("dW"), dH);
		m_pPart->GetSpecialtyData()->SetAt(_T("dT"), dT);
		m_pPart->GetSpecialtyData()->SetAt(_T("bExt"), bLRExt);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx1"), dEx1);
		m_pPart->GetSpecialtyData()->SetAt(_T("dEx2"), dEx2);
		m_pPart->GetSpecialtyData()->SetAt(_T("vtDir"), vtDir);
		m_pPart->GetSpecialtyData()->SetAt(_T("vtWall"), vtWall);

		m_pPart->Create();
	}
	return true;
}

bool AecDbX3dPartEntity::SetAxis(int nIndex, const AcGeVector3d & vtAxis)
{
	AssertWriteEnabled();
	if (m_pPart)
		return m_pPart->SetAxis(nIndex, vtAxis);
	return true;
}

bool AecDbX3dPartEntity::GetAxis(int nIndex, AcGeVector3d & vtAxis) const
{
	assertReadEnabled();
	if (m_pPart)
		return m_pPart->GetAxis(nIndex, vtAxis);
	return true;
}

void AecDbX3dPartEntity::SetDrawable2d(const AcDbPolyline* pPl)
{
	assertWriteEnabled();

	if (pPl->hasBulges())
	{
		AecComplexCurve cpcur;
		m_drawable2d.GetEdage(cpcur);

		AecEqui::AecCurveElement el;
		memset(&el,0,sizeof(AecEqui::AecCurveElement));

		AcDbVoidPtrArray arCurPtrs;
		pPl->explode(arCurPtrs);

		double dSta = 0.0,dEnd = 0.0;
		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < arCurPtrs.length();i++)
		{
			pEnt = (AcDbEntity*)arCurPtrs.at(i);
			AcDbLine* pLn = AcDbLine::cast(pEnt);
			if (pLn != NULL)
			{
				el.ptGe[0] = pLn->startPoint();
				el.ptGe[1] = pLn->endPoint();
				el.ptGe[2] = pLn->endPoint();
				cpcur.append(el);
			}

			AcDbArc* pArc = AcDbArc::cast(pEnt);
			if (pArc != NULL)
			{
				pArc->getStartPoint(el.ptGe[0]);
				pArc->getEndPoint(el.ptGe[2]);

				pArc->getStartParam(dSta);
				pArc->getEndParam(dEnd);
				pArc->getPointAtParam((dSta+dEnd)*0.5,el.ptGe[1]);

				cpcur.append(el);
			}
			delete pEnt;
		}
		if (!cpcur.isEmpty()) m_drawable2d.SetEdage(cpcur);
	}
	else
	{
		AecComplexCurve cpcur;
		m_drawable2d.GetEdage(cpcur);

		AecEqui::AecCurveElement el;
		memset(&el,0,sizeof(AecEqui::AecCurveElement));

		for (int i = 0;i < pPl->numVerts()-1;i++)
		{
			pPl->getPointAt(i,el.ptGe[0]);
			pPl->getPointAt(i+1,el.ptGe[1]);

			el.ptGe[2] = el.ptGe[1];
			el.bHided = FALSE;
			cpcur.append(el);
		}
		m_drawable2d.SetEdage(cpcur);
	}
}

void AecDbX3dPartEntity::SetDrawable2d(AcGePoint3d* pptGe,int nCount,Adesk::Int32 nGsMark)
{
	AecComplexCurve cpcur;
	m_drawable2d.GetEdage(cpcur);

	AecEqui::AecCurveElement el;
	memset(&el, 0, sizeof(AecEqui::AecCurveElement));
	el.gsMark = nGsMark;

	for (int i = 0;i < nCount - 1;i++)
	{
		el.ptGe[0] = pptGe[i];
		el.ptGe[1] = pptGe[i + 1];
		el.ptGe[2] = pptGe[i + 1];
		cpcur.append(el);
	}
	m_drawable2d.SetEdage(cpcur);
}

void AecDbX3dPartEntity::SetDrawable2d(const AcGePoint3d& ptCen,double dR,const AcGeVector3d& vtZ)
{
	assertWriteEnabled();

	AecComplexCurve cpcur;
	m_drawable2d.GetEdage(cpcur);

	AcGePoint3d ptCenNew = ptCen;

	if (m_pPart != NULL)
		m_pPart->Transformby(ptCenNew);

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	if (vtZ.isParallelTo(AcGeVector3d::kZAxis))//板开洞
	{
		el.ptGe[0] = ptCenNew;
		el.ptGe[0].x += dR;

		el.ptGe[1] = ptCenNew;
		el.ptGe[1].y += dR;

		el.ptGe[2] = ptCenNew;
		el.ptGe[2].x -= dR;
		cpcur.append(el);

		el.ptGe[0] = ptCenNew;
		el.ptGe[0].x -= dR;

		el.ptGe[1] = ptCenNew;
		el.ptGe[1].y -= dR;

		el.ptGe[2] = ptCenNew;
		el.ptGe[2].x += dR;
		cpcur.append(el);

		//增加左右- 线
		m_drawable2d.SetEdage(cpcur);
	}
	else
	{

	}
}

void AecDbX3dPartEntity::SetDrawable2d(const AcGePoint3d& pt1,const AcGePoint3d& pt2,BOOL bDashed)
{
	assertWriteEnabled();

	AecComplexCurve cpcur;
	m_drawable2d.GetEdage(cpcur);

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));
	
	el.ptGe[0] = pt1;el.ptGe[1] = pt2;el.ptGe[2] = pt2;

	AcGeLine3d ln3d;
	ln3d.set(pt1,pt2);
	if (ln3d.isParallelTo(AcGePlane::kXYPlane))
	{
		el.idSubLty = KTSetting::InitLineStyle(_T("DASHED"));
	}

	if (m_pPart != NULL)
	{
		m_pPart->Transformby(el.ptGe[0]);
		m_pPart->Transformby(el.ptGe[1]);
		m_pPart->Transformby(el.ptGe[2]);
	}
	if (bDashed)
	{
		el.idSubLty = KTSetting::InitLineStyle(_T("DASHED"));
	}
	cpcur.append(el);
	m_drawable2d.SetEdage(cpcur);
}

//双线
void AecDbX3dPartEntity::SetDrawable2d(const AcGePoint3d& ptCen,double dR,double dL,const AcGeVector3d& vtDir)
 {
	assertWriteEnabled();

	AcGePoint3d ptCenNew = ptCen;
	CString sType = _T("");
	if (m_pPart != NULL)
	{
		m_pPart->Transformby(ptCenNew);
		m_pPart->GetSpecialtyData()->GetAt(KEY_PIPETYPE, sType);
	}

	AcGeLine3d ln3d;
	ln3d.set(ptCenNew,vtDir);

	if (AcGePlane::kXYPlane.isParallelTo(ln3d))
	{
		//		|  |
		//     -|  |-
		//		|  |

		AecComplexCurve cpcur;
		m_drawable2d.GetEdage(cpcur);

		AecEqui::AecCurveElement el;
		memset(&el,0,sizeof(AecEqui::AecCurveElement));

		AcGeVector3d vtL = vtDir;
		vtL.normalize();

		AcGeVector3d vtV = vtL;
		vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

		AcGePoint3d ptS[2], ptE[2];

		el.ptGe[0] = ptCenNew;
		el.ptGe[0] += vtV * dR;
		el.ptGe[0] -= 0.5 * dL * vtL;
		el.ptGe[1] = el.ptGe[0] + vtL * dL;
		el.ptGe[2] = el.ptGe[1];
		ptS[0] = el.ptGe[0];
		ptE[0] = el.ptGe[2];
		//考虑倾斜延伸到墙体对齐
		cpcur.append(el);

		el.ptGe[0] -= vtV * 2.0 * dR;
		el.ptGe[1] -= vtV * 2.0 * dR;
		el.ptGe[2] -= vtV * 2.0 * dR;
		ptS[1] = el.ptGe[0];
		ptE[1] = el.ptGe[2];
		//考虑倾斜延伸到墙体对齐
		cpcur.append(el);

		//增加左右-线
		el.ptGe[0] = ptCenNew;
		el.ptGe[0] += dR * vtV;
		el.ptGe[1] = el.ptGe[0] + vtV * dR;
		el.ptGe[2] = el.ptGe[1];
		el.dWidth = 0.25;
		cpcur.append(el);

		el.ptGe[0] = ptCenNew;
		el.ptGe[0] -= dR * vtV;
		el.ptGe[1] = el.ptGe[0] - vtV * dR;
		el.ptGe[2] = el.ptGe[1];
		cpcur.append(el);

		if (sType.Find(_T("柔性")) != -1)
		{
			el.ptGe[0] = ptS[0];
			el.ptGe[1] = el.ptGe[0] + vtV * dR;
			el.ptGe[2] = el.ptGe[1];
			el.dWidth = 0.25;
			cpcur.append(el);

			el.ptGe[0] = ptE[0];
			el.ptGe[1] = el.ptGe[0] + vtV * dR;
			el.ptGe[2] = el.ptGe[1];
			el.dWidth = 0.25;
			cpcur.append(el);

			el.ptGe[0] = ptS[1];
			el.ptGe[1] = el.ptGe[0] - vtV * dR;
			el.ptGe[2] = el.ptGe[1];
			el.dWidth = 0.25;
			cpcur.append(el);

			el.ptGe[0] = ptE[1];
			el.ptGe[1] = el.ptGe[0] - vtV * dR;
			el.ptGe[2] = el.ptGe[1];
			el.dWidth = 0.25;
			cpcur.append(el);
		}

		m_drawable2d.SetEdage(cpcur);
	}
}

void AecDbX3dPartEntity::SetDrawable2d(const AcGePoint3d &ptCen, double dR, double dL, const AcGeVector3d &vtDir,const AcGeVector3d& vtWall)
{
	assertWriteEnabled();

	AcGePoint3d ptCenNew = ptCen;
	CString sType = _T("");
	if (m_pPart != NULL)
	{
		m_pPart->Transformby(ptCenNew);
		m_pPart->GetSpecialtyData()->GetAt(KEY_PIPETYPE,sType);
	}

	AcGeLine3d ln3d;
	ln3d.set(ptCenNew, vtDir);

	if (AcGePlane::kXYPlane.isParallelTo(ln3d))
	{
			//		|  |
			//     -|  |-
			//		|  |
			AecComplexCurve cpcur;
			m_drawable2d.GetEdage(cpcur);

			AecEqui::AecCurveElement el;
			memset(&el, 0, sizeof(AecEqui::AecCurveElement));

			AcGeVector3d vtL = vtDir;
			vtL.normalize();

			AcGeVector3d vtV = vtWall;
			vtV.normalize();

			double dAng = vtV.angleTo(vtL);
			double dRL = dR / sin(dAng);

			AcGePoint3d ptS[2], ptE[2];

			//  ||
			el.ptGe[0] = ptCenNew;
			el.ptGe[0] += vtV * dRL;
			el.ptGe[0] -= 0.5 * dL * vtL;
			el.ptGe[1] = el.ptGe[0] + vtL * dL;
			el.ptGe[2] = el.ptGe[1];
			ptS[0] = el.ptGe[0];
			ptE[0] = el.ptGe[2];

			//考虑倾斜延伸到墙体对齐
			cpcur.append(el);

			el.ptGe[0] -= vtV * 2.0 * dRL;
			el.ptGe[1] -= vtV * 2.0 * dRL;
			el.ptGe[2] -= vtV * 2.0 * dRL;

			ptS[1] = el.ptGe[0];
			ptE[1] = el.ptGe[2];

			//考虑倾斜延伸到墙体对齐
			cpcur.append(el);

			//增加左右-线
			el.ptGe[0] = ptCenNew;
			el.ptGe[0] += dRL * vtV;
			el.ptGe[1] = el.ptGe[0] + vtV * dRL;
			el.ptGe[2] = el.ptGe[1];
			el.dWidth = 0.25;
			cpcur.append(el);

			el.ptGe[0] = ptCenNew;
			el.ptGe[0] -= dRL * vtV;
			el.ptGe[1] = el.ptGe[0] - vtV * dRL;
			el.ptGe[2] = el.ptGe[1];
			cpcur.append(el);

			if (sType.Find(_T("柔性")) != -1)
			{
				el.ptGe[0] = ptS[0];
				el.ptGe[1] = el.ptGe[0] + vtV * dRL;
				el.ptGe[2] = el.ptGe[1];
				el.dWidth = 0.25;
				cpcur.append(el);

				el.ptGe[0] = ptE[0];
				el.ptGe[1] = el.ptGe[0] + vtV * dRL;
				el.ptGe[2] = el.ptGe[1];
				el.dWidth = 0.25;
				cpcur.append(el);

				el.ptGe[0] = ptS[1];
				el.ptGe[1] = el.ptGe[0] - vtV * dRL;
				el.ptGe[2] = el.ptGe[1];
				el.dWidth = 0.25;
				cpcur.append(el);

				el.ptGe[0] = ptE[1];
				el.ptGe[1] = el.ptGe[0] - vtV * dRL;
				el.ptGe[2] = el.ptGe[1];
				el.dWidth = 0.25;
				cpcur.append(el);
			}

			m_drawable2d.SetEdage(cpcur);
	}
}

Acad::ErrorStatus AecDbX3dPartEntity::subErase(Adesk::Boolean erasing)
{
	if (erasing)
	{
		AssocReCreateDraw();
	}
	return AecDbEntityBase::subErase(erasing);
}

Acad::ErrorStatus AecDbX3dPartEntity::AssocReCreateDraw()
{
	AcDbObjectId id;
	GetSpecialtyData()->GetAt(KEY_ASSOIC,id);

	AcDbEntity* pEnt = NULL;
	Acad::ErrorStatus es;

	if ( Acad::eOk == (es = acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite)))
	{
		AecDbEntityBase* pEntBase = AecDbEntityBase::cast(pEnt);
		if (pEntBase != NULL)
		{
			pEntBase->ReCreateDraw2d();
			pEntBase->ReCreateDraw3d();
		}

		AecDbCurveBase* pCrvBase = AecDbCurveBase::cast(pEnt);
		if (pCrvBase != NULL)
		{
			pCrvBase->ReCreateDraw2d();
			pCrvBase->ReCreateDraw3d();
		}

		pEnt->close();
	}
	return Acad::eOk;
}

bool AecDbX3dPartEntity::GetPositionGrip(int nIndex, AecGripData *&pGrip) const
{
	if (nIndex < GRIP_LENGTH && nIndex >= 0)
	{
		pGrip = &m_pGripAppData[nIndex];
		return true;
	}
	return false;
}

//As Pipe As Hole 实体
Acad::ErrorStatus AecDbX3dPartEntity::HoleAndPipeExtend(double dThickAdd,const AcGeVector3d& vtAdd)
{
	AssertWriteEnabled();

	if (!objectId().isValid())
	{
		return Acad::eOk;
	}

	AcGeVector3d vtZ2 = vtAdd;
	vtZ2.normalize();

	CString sName = GetName();
	AcGeVector3d vtZ,vtWall(0,0,0);
	double dThick = 0.0;
	int nShpae = 0;
	GetSpecialtyData()->GetAt(_T("nShape"),nShpae);//方

	AcGePoint3d ptOrg = m_pPart->GetOrgPoint(false);
	ptOrg += vtAdd;

	double dL = 0.0,dW = 0.0,dH = 0.0,dT = 0.0;	
	CString sNo;
	GetSpecialtyData()->GetAt(KEY_NO,sNo);

	if (sName.CompareNoCase(_T("开洞")) == 0)
	{
		if (nShpae == eRect)
		{
			GetSpecialtyData()->GetAt(_T("m_dL"),dL);
			GetSpecialtyData()->GetAt(_T("m_dW"),dW);
			GetSpecialtyData()->GetAt(_T("m_dT"),dH);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);
			dThick = dH;
		}
		else if (nShpae == eCircle)
		{
			GetSpecialtyData()->GetAt(_T("m_dL"),dL);
			GetSpecialtyData()->GetAt(_T("m_dW"),dW);
			GetSpecialtyData()->GetAt(_T("m_dT"),dH);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			dL *= 2.0;
			dW *= 2.0;
			dThick = dH;
		}
		else
		{
			//异形洞口
			CString sPoint2dsTop;
			GetSpecialtyData()->GetAt(_T("Points"),sPoint2dsTop);

			GetSpecialtyData()->GetAt(_T("dH"),dH);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

			dThick = dH;

			AcDbPolyline* pPl = CoreTools::StringToPolyline(sPoint2dsTop);
			if (pPl != NULL)
			{
				AcGeMatrix3d xform;

				vtZ2 *= 0.5 * dThickAdd;
				xform.setToTranslation(vtZ2);
				pPl->transformBy(xform);

				sPoint2dsTop = _T("");
				CoreTools::PolylineToString(pPl,sPoint2dsTop);

				GetSpecialtyData()->SetAt(_T("Points"),sPoint2dsTop);
				
				delete pPl;
				//TEST
				/*
				pPl->setColorIndex(1);
				AddToModelSpace(pPl);
				*/
			}
		}

		if (nShpae == eCircle)//cir
		{
			GetSpecialtyData()->SetAt(KEY_NO,sNo);
			SetAsHole(ptOrg,0.5 * dL,dThick + dThickAdd,vtZ,FALSE);
		}
		else if (nShpae == eRect)//rect
		{
			GetSpecialtyData()->SetAt(KEY_NO,sNo);
			SetAsHole(ptOrg,dL,dW,dThick + dThickAdd,vtZ,FALSE);
		}
		else
		{
			//异形洞口
			CString sPoint2dsTop;
			GetSpecialtyData()->GetAt(_T("Points"),sPoint2dsTop);
			GetSpecialtyData()->SetAt(KEY_NO,sNo);
			SetAsHole(ptOrg,sPoint2dsTop,dThick + dThickAdd,vtZ);
		}
	}
	else if (sName.CompareNoCase(_T("套管")) == 0)
	{
		int nDlgShape = 0;
		BOOL bExt = FALSE;
		double dEx1 = 0;
		double dEx2 = 0;

		if (nShpae == eCircle)
		{
			GetSpecialtyData()->GetAt(_T("dH"),dL);
			GetSpecialtyData()->GetAt(_T("dD"),dH);
			GetSpecialtyData()->GetAt(_T("dT"),dT);
			GetSpecialtyData()->GetAt(_T("bExt"),bExt);
			GetSpecialtyData()->GetAt(_T("dEx1"),dEx1);
			GetSpecialtyData()->GetAt(_T("dEx2"),dEx2);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);
			GetSpecialtyData()->GetAt(_T("vtWall"), vtWall);

			nDlgShape = 0;
			dThick = dL;
		}
		else if (nShpae == eRect)
		{
			GetSpecialtyData()->GetAt(_T("dH"),dL);
			GetSpecialtyData()->GetAt(_T("dL"),dW);
			GetSpecialtyData()->GetAt(_T("dW"),dH);
			GetSpecialtyData()->GetAt(_T("dT"),dT);
			GetSpecialtyData()->GetAt(_T("bExt"),bExt);
			GetSpecialtyData()->GetAt(_T("dEx1"),dEx1);
			GetSpecialtyData()->GetAt(_T("dEx2"),dEx2);
			GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);
			GetSpecialtyData()->GetAt(_T("vtWall"), vtWall);

			nDlgShape = 1;
			dThick = dL;
		} 
		else
		{
			//没有异形管
			return Acad::eOk;
		}
		GetSpecialtyData()->SetAt(KEY_NO,sNo);

		if (vtWall.isZeroLength())
			SetAsPipe(ptOrg,nDlgShape,dH,(nDlgShape==0) ? dH : dW,dT,dThick + dThickAdd,bExt,dEx1,dEx2,vtZ);
		else
			SetAsPipe(ptOrg, nDlgShape, dH, (nDlgShape == 0) ? dH : dW, dT, dThick + dThickAdd, bExt, dEx1, dEx2, vtZ,vtWall);
	}
	else if(sName.Find(_T("井")) != -1)
	{
		//对于井上对齐,所以vtAdd*2
		AddMove(2.0 * vtAdd);

		AecDbObjXDataMap* pXData = GetSpecialtyData();

		//重建
		if (sName.CompareNoCase(_T("方台井")) == 0)
		{
			double dL = 0,dW = 0,dH = 0,dA = 0,dB = 0,dT = 0,dSlabThick = 0,dBomThick;
			pXData->GetAt(_T("dL"),dL);
			pXData->GetAt(_T("dW"),dW);
			pXData->GetAt(_T("dH"),dH);
			pXData->GetAt(_T("dL1"),dA);
			pXData->GetAt(_T("dW1"),dB);
			pXData->GetAt(_T("dt"),dT);
			pXData->GetAt(_T("dBomt"),dBomThick);
			if (dBomThick < 1.e-2)
				dBomThick = dT;

			pXData->GetAt(_T("m_dT"),dSlabThick);
			dSlabThick /= 1.1;
			dSlabThick += dThickAdd;

			AcGePoint3d ptCen = GetOrgPoint(true);
			ResetMove();
			ptOrg = ptCen;
			ptOrg.z += 0.5 * dSlabThick;//到中心

			SetAsHole(ptOrg,dL,dW,1.1 * dSlabThick,AcGeVector3d::kZAxis);

			AcGeVector2d vtOffset(0,0);
			SetAsWell(ptCen,dL,dW,dA,dB,dH,dT,dBomThick,vtOffset,true);
		}
		else if(sName.CompareNoCase(_T("方圆井")) == 0)
		{
			double dL = 0,dW = 0,dH = 0,dT = 0;
			pXData->GetAt(_T("dL"),dL);
			pXData->GetAt(_T("dW"),dW);
			pXData->GetAt(_T("dH"),dH);

			double dr = 0.0;
			pXData->GetAt(_T("dr"),dr);
			double dD = 2.0 * dr;
			pXData->GetAt(_T("dt"),dT);

			double dBomT = dT;
			pXData->GetAt(_T("dBomT"),dBomT);
			if (dBomT < 1.e-2)
				dBomT = dT;

			double dXOffset = 0,dSlabThick = 0;
			pXData->GetAt(_T("dXOffset"),dXOffset);

			pXData->GetAt(_T("m_dT"),dSlabThick);
			dSlabThick /= 1.1;
			dSlabThick += dThickAdd;

			AcGePoint3d ptCen = GetOrgPoint(true);
			AcGePoint3d ptOrg = ptCen;
			ptOrg = ptCen;
			ptOrg.z += 0.5 * dSlabThick;//到中心

			ResetMove();
			SetAsHole(ptOrg,dL,dW,1.2 * dSlabThick,AcGeVector3d::kZAxis);

			SetAsWell(ptCen,dL,dW,0.5 * dD,dH,dT,dBomT,dXOffset,true);
		}
		else if(sName.CompareNoCase(_T("集水坑井")) == 0)
		{
			double dAng = 22.5,dL = 0,dW = 0,dH = 0;
			pXData->GetAt(_T("dL"),dL);
			pXData->GetAt(_T("dW"),dW);
			pXData->GetAt(_T("dH"),dH);

			double dBomThick = 0,dT = 0,dAngle = 0;
			if (pXData->GetAt(_T("dSlabThick"),dBomThick))
			{
				pXData->GetAt(_T("dBomThick"),dT);
			}
			else
			{
				pXData->GetAt(_T("dBomThick"),dBomThick);
				pXData->GetAt(_T("dBomThick"),dT);
			}

			double dSlabThick = 0;
			pXData->GetAt(_T("m_dT"),dSlabThick);
			dSlabThick /= 1.1;
			dSlabThick += dThickAdd;

			if ( pXData->GetAt(_T("Ang"),dAng) )
			{
				dAng *= 180.0 / PI;
			}
			dAngle = dAng;

			AcGePoint3d ptCen = GetOrgPoint(true);
			AcGePoint3d ptOrg = ptCen;
			ptOrg.z += 0.5 * dSlabThick;//到中心
			ResetMove();
			SetAsHole(ptOrg,dL,dW,1.1 * dSlabThick,AcGeVector3d::kZAxis);

			AcGeVector2d vtOffset(0,0);
			dAng = dAngle * PI / 180.0;
			float fSlabThick = (float)(dBomThick);
			SetAsWell(ptCen,dL,dW,dH,fSlabThick,dT,dAng,true);
		}
		else if (sName.CompareNoCase(_T("圆台井")) == 0)
		{
			double dR = 0,dT = 0,dH = 0;
			pXData->GetAt(_T("dR"),dR);
			double dD = dR * 2.0;

			double dr = 0;
			pXData->GetAt(_T("dr"),dr);
			double dd = dr * 2.0;
			
			pXData->GetAt(_T("dt"),dT);

			double dBomt = dT;
			pXData->GetAt(_T("dBomt"),dBomt);
			pXData->GetAt(_T("dH"),dH);

			double dSlabThick = 0;
			pXData->GetAt(_T("m_dT"),dSlabThick);
			dSlabThick /= 1.1;
			dSlabThick += dThickAdd;

			AcGePoint3d ptCen = GetOrgPoint(true);
			ResetMove();

			AcGePoint3d ptOrg = ptCen;
			ptOrg.z += 0.5 * dSlabThick;//到中心

			SetAsHole(ptOrg,0.5 * dD,1.1 * dSlabThick,AcGeVector3d::kZAxis);

			AcGeVector2d vtOffset(0,0);
			SetAsWell(ptCen,0.5 * dD,0.5 * dd,dH,dT,dBomt,vtOffset,true);

		}
		else if (sName.CompareNoCase(_T("异形偏心井")) == 0)
		{
			CString szPoint2dsTop,szPoint2dsBom;
			pXData->GetAt(_T("TopScr"),szPoint2dsTop);
			pXData->GetAt(_T("BomScr"),szPoint2dsBom);

			double dSlabThick = 0;
			pXData->GetAt(_T("m_dT"),dSlabThick);
			dSlabThick /= 1.1;
			dSlabThick += dThickAdd;

			AcGePoint3d ptCen = GetOrgPoint(true);
			ResetMove();

			AcGePoint3d ptOrg = ptCen;
			ptOrg.z += 0.5 * dSlabThick;//到中心

			double dH = 0,dThick = 0,dBomThick = 0;
			pXData->GetAt(_T("dH"),dH);
			pXData->GetAt(_T("dThick"),dThick);
			pXData->GetAt(_T("dBomThick"),dBomThick);

			SetAsHole(ptOrg,szPoint2dsTop,1.1 * dSlabThick,AcGeVector3d::kZAxis);

			double dElBom = ptOrg.z - 0.5 * dSlabThick;
			AcGeVector2d vtOffset(0,0);
			SetAsWell(szPoint2dsTop,szPoint2dsBom,dH,dThick,dBomThick,dElBom,true);
		}
		else
		{
			//...
		}
	}
	else
	{
		//...
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbX3dPartEntity::AdjustHoleAndPipe(double dThickOld,double dThickAdd,int nDir)
{
	if (!objectId().isValid())
	{
		return Acad::eOk;
	}

	AcGeVector3d vtZ,vtAdd;
	GetSpecialtyData()->GetAt(_T("vtDir"),vtZ);

	vtZ.normalize();
	vtAdd = vtZ;
	vtAdd *= 0.5 * dThickAdd;
	
	//向心的方向
	if (nDir < 0)
		vtAdd *= nDir;

	HoleAndPipeExtend(dThickAdd,vtAdd);

	return Acad::eOk;
}

int AecDbX3dPartEntity::ComparedTo(AecDbEntityBase* pCurOther) const
{
	assertReadEnabled();

	AecDbX3dPartEntity* pOther = AecDbX3dPartEntity::cast(pCurOther);
	if (pOther != NULL)
	{
		CString sName = GetName();
		if (sName.CompareNoCase(_T("开洞")) == 0)
		{
			int nShpae1 = 0;
			GetSpecialtyData()->GetAt(_T("nShape"),nShpae1);

			int nShpae2 = 0;
			GetSpecialtyData()->GetAt(_T("nShape"),nShpae2);
	
			if (nShpae1 != nShpae2)
				return 1;

			double dL = 0.0,dW = 0.0,dH = 0.0;
			if (nShpae1 == eRect)
			{
				GetSpecialtyData()->GetAt(_T("m_dL"),dL);
				GetSpecialtyData()->GetAt(_T("m_dW"),dW);
				GetSpecialtyData()->GetAt(_T("m_dT"),dH);
			}
			else if (nShpae1 == eCircle)
			{
				GetSpecialtyData()->GetAt(_T("m_dL"),dL);
				GetSpecialtyData()->GetAt(_T("m_dW"),dW);
				GetSpecialtyData()->GetAt(_T("m_dT"),dH);
			}
			else
			{
				return -1;
			}

			double dL2 = 0.0,dW2 = 0.0,dH2 = 0.0;
			if (nShpae1 == eRect)
			{
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("m_dL"),dL2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("m_dW"),dW2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("m_dT"),dH2);
			}
			else if (nShpae1 == eCircle)
			{
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("m_dL"),dL2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("m_dW"),dW2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("m_dT"),dH2);
			}
			else
			{
				return -1;
			}

			AcGePoint3d ptOrg1 = GetOrgPoint(true);
			AcGePoint3d ptOrg2 = pOther->GetOrgPoint(true);
			if (ptOrg1.distanceTo(ptOrg2) > 1.e-1)
				return 1;

			if ( fabs(dL - dL2) > 1.0)
				return 1;

			if ( fabs(dW - dW2) > 1.0)
				return 1;

			return 0;
		}
		else if (sName.CompareNoCase(_T("套管")) == 0)
		{
			int nShpae1 = 0;
			GetSpecialtyData()->GetAt(_T("nShape"),nShpae1);

			int nShpae2 = 0;
			GetSpecialtyData()->GetAt(_T("nShape"),nShpae2);

			if (nShpae1 != nShpae2)
				return 1;

			double dL = 0.0,dW = 0.0,dH = 0.0,dT = 0.0;

			if (nShpae1 == eCircle)
			{
				GetSpecialtyData()->GetAt(_T("dH"),dL);
				GetSpecialtyData()->GetAt(_T("dD"),dH);
				GetSpecialtyData()->GetAt(_T("dT"),dT);
			}
			else if (nShpae1 == eRect)
			{
				GetSpecialtyData()->GetAt(_T("dH"),dL);
				GetSpecialtyData()->GetAt(_T("dL"),dW);
				GetSpecialtyData()->GetAt(_T("dW"),dH);
				GetSpecialtyData()->GetAt(_T("dT"),dT);
			}
			else
			{
				return -1;
			}

			double dL2 = 0.0,dW2 = 0.0,dH2 = 0.0,dT2 = 0.0;
			if (nShpae1 == eCircle)
			{
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("dH"),dL2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("dD"),dH2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("dT"),dT2);

				if ( fabs(dL - dL2) > 1.0)
					return 1;

				if ( fabs(dH - dH2) > 1.0)
					return 1;

				if ( fabs(dT - dT2) > 1.0)
					return 1;

				return 0;
			}
			else if (nShpae1 == eRect)
			{
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("dH"),dL2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("dL"),dW2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("dW"),dH2);
				pOther->GetSpecialtyData(AcDb::kForRead)->GetAt(_T("dT"),dT2);

				if ( fabs(dL - dL2) > 1.0)
					return 1;

				if ( fabs(dH - dH2) > 1.0)
					return 1;

				if ( fabs(dT - dT2) > 1.0)
					return 1;

				if ( fabs(dW - dW2) > 1.0)
					return 1;
		
				return 0;
			}
			else
			{
				return -1;
			}
		}
		else
		{
			//比较体积,素砼 体积较大不考虑
			//double dVol1 = GetVolume();
			//double dVol2 = pOther->GetVolume();

			//if ( fabs(dVol1 - dVol2) > 1.0)
			//	return 1;

			return 0;
		}
	}
	return -1;
}

int AecDbX3dPartEntity::GetSectionDraw(const AcGePoint3d& ptFr,const AcGePoint3d& ptTo,const AcGeVector3d& vtViewDir,const AcGeVector3d& vtTo, AcDbVoidPtrArray&  arRegionPtrs) const
{
	//对于井等
	CString sName;
	sName = GetName();

	if (sName.Find(_T("洞")) != -1 ||
		sName.Find(_T("管")) != -1)
	{
		return 0;
	}

	AcGeVector3d vtLn = ptTo - ptFr;
	AcGeVector3d vtNorm = vtLn.crossProduct(vtViewDir);

	AcGePlane plan;
	plan.set(ptFr,vtNorm);

	AcGeMatrix3d xformPlanToWorld;
	xformPlanToWorld.setToPlaneToWorld(plan);
	xformPlanToWorld.invert();

	AcDbVoidPtrArray arSolidPtrs;
	AcDb3dSolid* pSolidDraw = CreateDraw3dSolid();
	if (pSolidDraw != NULL)
	{
		arSolidPtrs.append(pSolidDraw);
	}

	AcDbRegion* pRegionT = NULL;
	AcDb3dSolid* pSolidT = NULL;
	AcDbEntity* pEntT = NULL;
	for (int k = 0;k < arSolidPtrs.length();k++)
	{
		pEntT = (AcDbEntity*)arSolidPtrs.at(k);
		pSolidT = AcDb3dSolid::cast(pEntT);
		if (pSolidT != NULL)
		{
			pRegionT = NULL;
			pSolidT->getSection(plan,pRegionT);

			if (pRegionT != NULL)
			{
				pRegionT->transformBy(xformPlanToWorld);
				pRegionT->setLayer(pSolidT->layer());

				AcDbVoidPtrArray arHatchPtrs;
				CString sPattern;
				GetSectionHatchPattern(sPattern);
				RegionHatch(pRegionT,arHatchPtrs,sPattern);
				if (!arHatchPtrs.isEmpty())
				{
					arRegionPtrs.append(arHatchPtrs);
				}

				//如果是套管标注
				arRegionPtrs.append(pRegionT);
			}
			delete pSolidT;
		}
	}
	return 0;
}

SHJson::WValue& AecDbX3dPartEntity::ToJson(bool bExprotGeo) const
{
	assertReadEnabled();
	using namespace SHJson;
	WValue &v = AecDbEntityBase::ToJson(bExprotGeo);

	AcDbObjectId ownerid;
	GetSpecialtyData()->GetAt(_T("Assoc"), ownerid);
	addMember(v, _T("__owner__"), ownerid.asOldId());
	addMember(v, _T("__pPart__"), m_pPart->ToJson());

	return v;
}

bool AecDbX3dPartEntity::ByJson(const SHJson::WValue &v)
{
	AssertWriteEnabled();
	using namespace SHJson;

	if (!AecDbEntityBase::ByJson(v)) return false;

	MCIt it = v.FindMember(_T("__pPart__"));
	if (it == v.MemberEnd()) return false;

	AecDbX3dPart *pPart = new AecDbX3dPart();
	if (pPart->ByJson(it->value))
	{
		DELETE_PTR(m_pPart);
		m_pPart = pPart;
	}
	else
	{
		DELETE_PTR(pPart);
		return false;
	}

	return false;
}

Acad::ErrorStatus AecDbX3dPartEntity::subWblockClone(AcRxObject * pOwnerObject
	, AcDbObject *& pClonedObject
	, AcDbIdMapping & idMap
	, Adesk::Boolean isPrimary) const
{
	// 如果已经克隆过了，就直接返回，避免重复克隆
	AcDbIdPair idPairOpening(id(), AcDbObjectId::kNull, false, isPrimary ? true : false);
	if (idMap.compute(idPairOpening))
		return Acad::eOk;

	Acad::ErrorStatus es = AecDbEntityBase::subWblockClone(pOwnerObject, pClonedObject, idMap, isPrimary);

	// 与洞口的关联关系再板实体中建立

	if (!pClonedObject) return es;

	AecDbX3dPartEntity *pOpening = AecDbX3dPartEntity::cast(pClonedObject);
	if (pOpening)
		pOpening->SetAt(KEY_ASSOIC, AcDbObjectId::kNull);
	return es;

	return Acad::ErrorStatus();
}