#include "stdafx.h"
#include "StdArx.h"
#include "FZLBDlg.h"
#include "CoreTools.h"


//填充面板对话框：
extern bool acedHatchPalletteDialog(const TCHAR* Pattern, bool bAllowCustom, TCHAR*& result);
DLLIMPEXP CString IDCreate();

IMPLEMENT_DYNAMIC(CFZLBDlg, CDialog)

int g_nSlabNo = 1;
CFZLBDlg::CFZLBDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CFZLBDlg::IDD, pParent)
	, m_dT(360.0)
	, m_dBomEl(0.0)
	, m_sMaterial(_T("钢筋混凝土"))
	, m_sPurpose(_T("工业楼板"))
	, m_dWallThick(400.0)
	, m_bOffsetHalfWall(FALSE)
	, m_sNo(_T("B-01"))
	, m_sPatternName(_T(""))
	, m_dAngle(0.0)
	, m_sScale(_T("50.0"))
	, m_bNOSetDefault(TRUE)
	, m_sHatch(HATCH_DEFAULT)
	, m_bAddHatch(TRUE)
{
	g_nSlabNo++;
	m_sNo.Format(_T("B-%d"),g_nSlabNo);

	if (m_bNOSetDefault)
		m_sNo = IDCreate();

	GET_CACHE(CFZLBDlg
		, %f%f%f%s%s%s%d%s
		, &m_dT
		, &m_dBomEl
		, &m_dWallThick
		, &m_sMaterial
		, &m_sPurpose
		, &m_sNo
		, &m_bOffsetHalfWall
		, &m_sHatch );
}

CFZLBDlg::~CFZLBDlg()
{
}

void CFZLBDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Text(pDX, IDC_EDIT1, m_dT);
	DDX_Text(pDX, IDC_EDIT3, m_dBomEl);
	DDX_Text(pDX, IDC_EDIT4, m_dWallThick);
	DDX_Text(pDX, IDC_EDIT2, m_sMaterial);
	DDX_Text(pDX, IDC_EDIT12, m_sPurpose);
	DDX_Text(pDX, IDC_EDIT6, m_sNo);
	DDX_Check(pDX, IDC_CHECK1, m_bOffsetHalfWall);
	DDX_Text(pDX, IDC_EDIT5, m_sPatternName);
	DDX_CBString(pDX, IDC_COMBO3, m_sScale);
	DDX_Text(pDX, IDC_EDIT18, m_dAngle);
	DDX_Check(pDX, IDC_CHECK6, m_bNOSetDefault);
	DDX_Control(pDX, IDC_BTN_FILL, m_wndBtHatch);
	DDX_Check(pDX, IDC_CHECK_HATCH, m_bAddHatch);
	DDX_Text(pDX, IDC_BTN_FILL, m_sHatch);
}


BEGIN_MESSAGE_MAP(CFZLBDlg, CDialog)
	ON_BN_CLICKED(IDOK, &CFZLBDlg::OnBnClickedOk)
	ON_BN_CLICKED(IDC_BUTTON3, &CFZLBDlg::OnBnClickedButton3)
	ON_BN_CLICKED(IDC_BUTTON1, &CFZLBDlg::OnBnClickedButton1)
	ON_BN_CLICKED(IDC_CHECK6, &CFZLBDlg::OnBnClickedCheck6)
	ON_BN_CLICKED(IDC_BTN_FILL, &CFZLBDlg::OnBnClickedBtnFill)
	ON_BN_CLICKED(IDC_CHECK_HATCH, &CFZLBDlg::OnBnClickedCheckHatch)
END_MESSAGE_MAP()


BOOL CFZLBDlg::OnInitDialog()
{
	CDialog::OnInitDialog();


	if (m_bNOSetDefault)
	{
		GetDlgItem(IDC_EDIT6)->EnableWindow(FALSE);
	}

	if (m_idSlab.isValid())
	{
		GetDlgItem(IDC_CHECK1)->EnableWindow(FALSE);
		GetDlgItem(IDC_EDIT4)->EnableWindow(FALSE);
	}

	m_wndBtHatch.EnableWindow(m_bAddHatch);

	UpdateData(FALSE);

	return TRUE;
}

void CFZLBDlg::OnBnClickedOk()
{
	if (!UpdateData(TRUE)) return;

	SET_CACHE(CFZLBDlg
		, %f%f%f%s%s%s%d%s
		, m_dT
		, m_dBomEl
		, m_dWallThick
		, m_sMaterial
		, m_sPurpose
		, m_sNo
		, m_bOffsetHalfWall
		, m_sHatch);

	//界面为顶部标高,内部调整为板底标高
	m_dBomEl -= m_dT;

	// 保护一下楼板类型
	if (m_sPurpose.IsEmpty() || m_sPurpose.Find(_T("楼板")) == -1)
		m_sPurpose += _T("楼板");

	UpdateSlabData();

	OnOK();
}

void CFZLBDlg::OnBnClickedButton3()
{
	UpdateData();
	LPCTSTR pszPattern = _T("ANSI32");

#ifdef ZWCAD
	TCHAR* pszReslt = new TCHAR;
#else
	TCHAR* pszReslt = NULL;
#endif

	if ( acedHatchPalletteDialog(pszPattern,true,pszReslt) )
	{
		m_sPatternName = pszReslt;
		UpdateData(FALSE);
	}
	DELETE_PTR(pszReslt);
}

void CFZLBDlg::OnBnClickedButton1()
{
	
}

void CFZLBDlg::OnBnClickedCheck6()
{
	UpdateData();

	if (m_bNOSetDefault)
	{
		GetDlgItem(IDC_EDIT6)->EnableWindow(FALSE);
	}
	else
	{
		GetDlgItem(IDC_EDIT6)->EnableWindow(TRUE);
	}
}

void CFZLBDlg::SetFromId(AcDbObjectId& id)
{
	m_idSlab = id;

	AcDbEntity* pEnt = NULL;
	if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite))
	{
		AecDbXSlab* pSlab = AecDbXSlab::cast(pEnt);
		if (pSlab != NULL)
		{
			AcGePoint3d ptCenPos;
			pSlab->GetSpecialtyData()->GetAt(KEY_ORGPT,ptCenPos);
			m_dBomEl = ptCenPos.z;

			pSlab->GetSpecialtyData()->GetAt(KEY_BOMTHICK,m_dT);

			//界面为顶部标高,调整为顶部标高
			m_dBomEl += m_dT;

			pSlab->GetSpecialtyData()->GetAt(KEY_NO,m_sNo);

			pSlab->GetSpecialtyData()->GetAt(KEY_MATERIAL,m_sMaterial);

			pSlab->GetSpecialtyData()->GetAt(KEY_PURPOSE,m_sPurpose);
			
			pSlab->GetSpecialtyData()->GetAt(KEY_PATTERN,m_sPatternName);
			pSlab->GetSpecialtyData()->GetAt(KEY_PATTERNANG,m_dAngle);
			pSlab->GetSpecialtyData()->GetAt(KEY_SECTION_HATCH, m_sHatch);

			if (m_sHatch == HATCH_NO_NEED)
				m_bAddHatch = FALSE;
			else
				m_bAddHatch = TRUE;

			double dScale = 1.0;
			pSlab->GetSpecialtyData()->GetAt(KEY_PATTERNSCA,dScale);
			m_sScale.Format(_T("%.1f"),dScale);

			pSlab->GetAt(_T("_SLAB_HALF_WALL_"), m_bOffsetHalfWall);
			if (m_bOffsetHalfWall)
				pSlab->GetAt(_T("_HALF_WALL_THICK_"), m_dWallThick);

		}
		pEnt->close();
	}
}

void CFZLBDlg::UpdateSlabData()
{
	AcDbEntity* pEnt = NULL;
	if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,m_idSlab,AcDb::kForWrite))
	{
		AecDbXSlab* pSlab = AecDbXSlab::cast(pEnt);
		if (pSlab != NULL)
		{
			AcGePoint3d ptCenPos;
			pSlab->GetSpecialtyData()->GetAt(KEY_ORGPT,ptCenPos); 
			CString sPl;			
			pSlab->GetSpecialtyData()->GetAt(KEY_POINTS,sPl);

			AcDbPolyline* pPl = CoreTools::StringToPolyline(sPl);
			if (pPl != NULL)
			{
				pPl->setElevation(m_dBomEl);
				CoreTools::PolylineToString(pPl,sPl);
				delete pPl;
			}

			//仅仅改变厚度和标高,Region不变
			//ptCenPos.z = 0.0;
			//pSlab->SetRegionSlab(sPl,m_dT,m_dBomEl,ptCenPos);

			AcDbLine* pLn = AcDbLine::cast(pSlab->GetBaseCurve());
			if (pLn != NULL)
			{
				AcGePoint3d ptSta = pLn->startPoint();
				AcGePoint3d ptEnd = pLn->endPoint();

				ptSta.z = m_dBomEl;
				ptEnd.z = ptSta.z + m_dT;

				pLn->setStartPoint(ptSta);
				pLn->setEndPoint(ptEnd);

				pSlab->SetBaseCurve(pLn);
				delete pLn;
			}

			AcGePoint3d pt = ptCenPos;
			pt.z = m_dBomEl;
			pSlab->GetSpecialtyData()->SetAt(KEY_ORGPT,pt,TRUE);
			pSlab->GetSpecialtyData()->SetAt(KEY_POINTS,sPl);
			pSlab->GetSpecialtyData()->SetAt(KEY_BOMTHICK,m_dT);

			// 以后的楼板都用此标记来判断
			pSlab->SetAt(AecDbXSlab::KEY_LB_Flag, TRUE);

			pSlab->GetSpecialtyData()->SetAt(KEY_NO,m_sNo);
			pSlab->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
			pSlab->GetSpecialtyData()->SetAt(KEY_MATERIAL,m_sMaterial);
			pSlab->GetSpecialtyData()->SetAt(KEY_PURPOSE,m_sPurpose);
			pSlab->SetHatch(m_sPatternName,m_dAngle,_ttof(m_sScale));
			pSlab->GetSpecialtyData()->SetAt(KEY_SECTION_HATCH, m_sHatch);
			if (m_bOffsetHalfWall)
			{
				pSlab->SetAt(_T("_SLAB_HALF_WALL_"), TRUE);
				pSlab->SetAt(_T("_HALF_WALL_THICK_"), m_dWallThick);
			}
			else
			{
				pSlab->SetAt(_T("_SLAB_HALF_WALL_"), FALSE);
			}

		}
		pEnt->close();
	}
}

void CFZLBDlg::OnBnClickedBtnFill()
{
	UpdateData();
	TCHAR *psz = new TCHAR[1024];
	::memset(psz, 0, sizeof(TCHAR) * 1024);

	CString sHatch(m_sMaterial);
	if (!m_sHatch.IsEmpty())
		sHatch = m_sHatch;

	if (acedHatchPalletteDialog(sHatch, false, psz))
	{
		m_sHatch = psz;
		m_wndBtHatch.SetWindowText(m_sHatch);
	}

	delete[] psz;
}


void CFZLBDlg::OnBnClickedCheckHatch()
{
	UpdateData();
	m_wndBtHatch.EnableWindow(m_bAddHatch);
	if (!m_bAddHatch)
		m_sHatch = HATCH_NO_NEED;
	else
		m_sHatch = HATCH_DEFAULT;

	UpdateData(FALSE);
}