#ifndef AFX_DBGOUGE_H__ #define AFX_DBGOUGE_H__ #if _MSC_VER > 1000 #pragma once #endif #include "DbPipeCanal.h" #define MINDIST 500 class PS_EXP TDbCableTrench : public TDbPipeCanal { DECLARE_TENTBASE(); ACRX_DECLARE_MEMBERS(TDbCableTrench); public: TDbCableTrench(); ~TDbCableTrench(); enum GougeStyle { eGNull = 0, // 空 eGCover = 1, // 盖板 eGLSide = 2, // 靠左边 eGRSide = 3, // 靠右边 eGOrder = 4, // 两边对齐 eGInter = 5 // 两边交错 }; //宽度 void SetGougeWidth(double dWidth); //电缆沟沟深 void SetGougeHeight(double dHeight); //电缆沟线宽 void SetGougeLineWidth(double dLineW); //电缆沟支架形式 void SetGougeMode(Adesk::UInt16 nType); //支架长度 void SetBracketLen(double dLen); //支架间距 void SetBracketDis(double dDis); //支架线宽 void SetBracketLineWidth(double dLineW); //拐角类别 void SetCornerType(Adesk::UInt16 nType); //倒角半径 void SetCornerRadius(double dRadius); //电缆编号 void SetTrenchNo(LPCTSTR lpNo); //宽度 double GetGougeWidth(); //电缆沟沟深 double GetGougeHeight(); //电缆沟线宽 double GetGougeLineWidth(); //电缆沟支架形式 Adesk::UInt16 GetGougeMode(); //支架长度 double GetBracketLen(); //支架间距 double GetBracketDis(); //支架线宽 double GetBracketLineWidth(); //拐角类别 Adesk::UInt16 GetCornerType(); //倒角半径 double GetCornerRadius() const; //得到电缆编号 void GetTrenchNo(CString &sNo); virtual CString GetXml(const AcGeMatrix3d& mat) const; public: // Override TDbEntity Acad::ErrorStatus subGetOsnapPoints(AcDb::OsnapMode osnapMode, INT_PTR gsSelectionMark, const AcGePoint3d& ptPick, const AcGePoint3d& lastPoint, const AcGeMatrix3d& viewXform, AcGePoint3dArray& snapPoints, AcDbIntArray& geomIds) const; virtual void CopyPropertiesFrom(AcDbEntity *pSrc, unsigned gMatchFlag); virtual Acad::ErrorStatus subGetClassID(CLSID* pClsid) const; virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &dc) const; virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &dc) const; virtual Acad::ErrorStatus dwgInFields (AcDbDwgFiler*); virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const; virtual Acad::ErrorStatus dxfInFields (AcDbDxfFiler*); virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const; virtual BOOL CanMergeWith(const TDbPipePrototype &other, int *iPosThis=NULL, int *iPosOther=NULL) const; // 自动增加节点到当前数据库，ids－该节点自动连接的管线，派生类应当重载 virtual AcDbObjectId AddAutoNodeToDb(const XPoint &ptAt, const DList &ids) const; virtual int GetFirstVersion()const{return 8;} // 绘制电缆沟支架 // add by 2011.02.21 剖切功能 注意 GetSection内不应将std::vector参数清空 virtual bool GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir, std::vector §ionRecord, AcDbVoidPtrArray& arFillPtrs) const; // 剖切用，返回Z坐标最高、最低点 virtual Acad::ErrorStatus GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const; virtual int GetBodyBox(AcDbExtents& ext); protected: void ExplodeOrDrawPipeCanal(XExplodeDraw &dc) const; void ExplodeOrDrawCanalType1(XExplodeDraw &dc) const; void ExplodeOrDrawCanalType2(XExplodeDraw &dc) const; ////////////////////////////////////////////////////////////////////////// //add liaoy 170627 当拐角半径不同时显示效果不好的问题 //基于TDbPipeCanal::SortPipeCanal() void SortPipeCanalTrench(const AcGePoint3d &ptOr,const AcDbObjectIdArray &arIds,AcArray>& arPairSeg) const; //基于TDbPipeCanal::GetCorner2InterPts() void GetCorner2InterPtsTrench(const std::pair &seg1,const const std::pair &seg2,const AcGePoint3d &pt,int nSegCount,AcGePoint3dArray &arPts,AcArray &map) const; void GetCorner2InterPtsTrench(const XCurveSegment &seg1,const XCurveSegment &seg2,const AcGePoint3d &pt,int nSegCount,double dSpare,AcGePoint3dArray &arPts,AcArray &map) const; //基于TDbPipeCanal::GetInterPts() void GetInterPtsTrench(const AcArray> &arPairSeg,AcArray &arPts,AcArray &map) const; //基于TDbPipeCanal::GetCannalPts() void GetCannalPtsTrench(const AcDbObjectId &id,AcGePoint3d &pt1,AcGePoint3d &pt2,AcArray &map) const; //add end ////////////////////////////////////////////////////////////////////////// private: // 绘制支架 Acad::ErrorStatus DrawBrackets(XExplodeDraw &dc,XCurveSegment& cenSeg) const; // 单边 BOOL MakeCurvesOfCableGougeSide(AcArray >& arBracket,XCurveSegment& cenSeg) const; // 对立 BOOL MakeCurvesOfCableGougeOrder(AcArray >& arBracket,XCurveSegment& cenSeg) const; // 交错 BOOL MakeCurvesOfCableGougeInter(AcArray >& arBracket,XCurveSegment& cenSeg) const; // 判断端口是否需要绘制连接线 BOOL IsHasMorePipes(const AcDbObjectId& idNode) const; // 节点连接的管子个数 int GetNodeCntPipeNumber(const AcDbObjectId& idNode) const; // 绘制支架 void DrawBracketsFun(const AcGeVector3d& vtHor,const AcGeVector3d& vtVer,const AcGePoint3d& ptStart,const AcGePoint3d& ptEnd,AcArray >& arBracket) const; void DrawBracketsFun(const AcGeVector3d& vtHor,const AcGeVector3d& vtVer,const AcGePoint3d& ptStart,double dLen,AcArray >& arBracket) const; // 绘制拐角处支架 void DrawBracketOfCorner(const AcGePoint3d& ptRef,AcArray& mapPt,AcArray >& arBracket,const AcDbObjectId& idNode) const; // 得到指定连接点的拐角点组 BOOL GetCornerPtMap(const AcGePoint3d& ptRef,AcArray& mapPt,CornerLine& temOut) const; // 重新构建绘制支架的线 BOOL ReConstructBracketLine(AcGePoint3d& ptS,AcGePoint3d& ptE,const AcDbObjectId& idNode) const; // 得到相连的另一条沟的宽度和倒角半径 void GetAnotherTrenchParam(const AcGeVector3d& vtHor,const AcDbObjectId& idNode,double& dWidth,double& dRadius) const; // 获取垂足点 BOOL GetVerticalFootPoint(const AcGePoint3d& pickPoint,const AcGePoint3d& lastPoint,AcGePoint3d& ptVerFoot) const; // 获取最近点 BOOL GetNearestPoint(const AcGePoint3d& pickPoint,AcGePoint3d& ptNear) const; // 释放内存 void FreeBuffer(AcArray& cplCurve) const; private: static const Adesk::UInt8 g_nVersion; double m_dGougeLineW; //电缆沟线宽 Adesk::UInt16 m_nBracketMode; //支架形式 double m_dBracketLen; //支架长度 double m_dBracketDis; //支架间距 double m_dBracketLineW; //支架线宽 Adesk::UInt16 m_nCornerType; //拐角类别 XString m_sTrenchNo; //电缆沟编号 XString m_sSpare; // 备用 double m_dSpare; // 备用 Adesk::UInt16 m_nSpare; // 备用 }; #endif // !defined(AFX_DBGOUGE_H__61B791DA_199E_45EC_B50D_C6CC518EFCE0__INCLUDED_)