#ifndef _SANITARYSYSFORDRAIN_H__
#define _SANITARYSYSFORDRAIN_H__

#include <DbEquipment.h>
#include "SanitarySys.h"

class SanitarySysForDrain: public SanitarySys
{

public:

	SanitarySysForDrain();
	// 自动连接洁具点和排水点
	virtual void AutoLinkSanitary(const SanitarySysData &data);
	// 设置倒角大小
	void SetChamferLen(double dChamferLen);
	// 连接洁具产生的管线
 	void GetLinkedPipe(std::vector<AcDbLine*> &vecPipe);

private:

	// 处理只有一个洁具的情况
	void LinkSingleSanitary(const SanitarySysData &data);
	// 根据规则设置主干管 ptFrom为排水点或给水点, ptTo为最远洁具点, bDrain判断是否为排水系统
	void SelectMianPipe(std::vector<SanitaryNode> &vec, TPipeSys::SysType sys, const AcDbObjectId &idPipe, AcGePoint3d &ptFrom, AcGePoint3d &ptTo);
	// 设定X轴，Y轴的向量
	void SetVector3dByXOY(AcGeVector3d &vtX, AcGeVector3d &vtY);
	// 在X或Y轴布置主干管
	void SetMainPipeForXOY(std::vector<SanitaryNode> &vec, TPipeSys::SysType sys, const AcDbObjectId &idPipe,
											  AcGePoint3d &pt, AcGePoint3d &ptFrom, AcGePoint3d &ptXoY, PipeDir Dir);
	// 按文档规则连接洁具点和管线
	void LinkPipe(std::vector<SanitaryNode> &data, TPipeSys::SysType sys, const AcGePoint3d &ptFrom);
	// 根据洁具点，管线编号，投影点，连接洁具
	void LinkSanitary(std::vector<SanitaryNode> &vec, TPipeSys::SysType sys, int nId, AcGePoint3d &ptSanitary, AcGePoint3d &ptPrj);
	// 添加管线
	void AddPipeLine(std::vector<SanitaryNode> &vec, TPipeSys::SysType sys, AcGePoint3d &ptS, AcGePoint3d &ptE, PipeType type, PipeDir Dir);
	void AddPipeLine(TPipeSys::SysType sys, const AcGePoint3d &ptS, const AcGePoint3d &ptE, PipeType type, PipeDir Dir);

	//设定排水附件
	void DrawDirtEquip(TPipeSys::SysType sys, SanitaryNode sanData, const AcGePoint3d &ptFrom);

	// 获取离洁具点最近的X Y轴方向的管线
	int GetNearestPipeForY(TPipeSys::SysType sys, const AcGePoint3d &pt);
	int GetNearestPipeForX(TPipeSys::SysType sys, const AcGePoint3d &pt);

	// 获得满足sys和nDir的管线
	void GetPipeLine(TPipeSys::SysType sys, PipeDir Dir, std::map<int, AcDbLine*> &mapLine);
	// sys系统中编号nId的管线
	AcDbLine* GetPipeLine(TPipeSys::SysType sys, int nId);

	// 获取洁具点在管线上的投影点
	bool GetProjectPoint(TPipeSys::SysType sys, int nId, const AcGePoint3d &pt, AcGePoint3d &pt1);
	// 根据 管线类型 和 延长方向 添加延长线
	void ExtendPipeLine(TPipeSys::SysType sys, AcGePoint3d &ptS, AcGePoint3d &ptE, PipeType type, PipeDir Dir, AcGePoint3d &ptTmp, bool bFromStart);

	// 设定管线移动后的点
	void SetBranchPipePt(TPipeSys::SysType sys, const AcGePoint3d &ptSanitary, const AcGePoint3d &ptProj, const AcGePoint3d &ptStart, const AcGePoint3d &ptEnd, AcGePoint3d &ptChamferStart, AcGePoint3d &ptBranchStart);
	// 获取洁具排水点相关信息
	void GetSanitaryDrainPtInfo(Entity &ent, CString &csBlk, CString &csSysBlk, double &dRadius, double &dDang, double &dBigQ, double &dAngle, XPoint &ptDrain);
	// 检查到管线相交时重新设定管线
	bool CheckIntersectPipe(AcGePoint3d &ptS, AcGePoint3d &ptE, TPipeSys::SysType sys);
	// 从管线排出端延长
	bool ExtendPipeLineFromEnd(TPipeSys::SysType sys, AcGePoint3d &ptS, AcGePoint3d &ptE);
	// 获取上级管线连接点
	void GetDrainPtByPipe(TPipeSys::SysType sys, AcGePoint3d &pt);
	double m_dChamferLen; // 倒角长度
	int m_nId;            // 当前可用管线id，使用后自动+1
	AcDbObjectId m_idPipe;// 排水管id
};

#endif