#include "stdafx.h" #include "TDbColumn.h" //ver: 0-TArch8 const Adesk::UInt8 TDbScissorsStair::g_nVersion = 0; ACRX_DXF_DEFINE_MEMBERS(ATSScissorsStair, ATSPolyPathEnt, AcDb::kDHL_CURRENT, AcDb::kMReleaseCurrent, 1, ATS_SCISSORSSTAIR, "ATS_SCISSORSSTAIR图形无法解析, 请下载上华软件|网址: www.shanghuasoft.com"); IMPLEMENT_TENTBASE(TDbScissorsStair); TDbScissorsStair::TDbScissorsStair() { m_nStepHeight=_AS_SYS_UNIT(220.0); //踏步高 m_nStepWidth=_AS_SYS_UNIT(300); //踏步宽 m_nStairWidth=_AS_SYS_UNIT(1200); //边梯段宽 m_nSlabSize=_AS_SYS_UNIT(1200); //休息平台尺寸 m_nRotation=0.0; //旋转角度 m_nStepNum1=m_nStepNum2=0; //一二跑步数 m_nSpaceWidth=_AS_SYS_UNIT(3600.0); //楼梯间尺寸 m_nRailHeight=_AS_SYS_UNIT(900); m_nStairFlag=1; //楼层标记 m_nStartSide=OFFSET_LEFT; //左梯起步 m_nAlignment=0; //踏步取齐: 0--齐休息平台, 1--齐中间, 2--齐楼板 m_nRailWidth=_AS_SYS_UNIT(60.0); //扶手宽度 m_nRailDistMid=m_nStepWidth*0.5; //层间转角处扶手伸出距离 m_nRailDist=m_nStepWidth*0.5; //层与层连接处扶手伸出距离 m_dSectRotation=PI/6.0; //剖断线旋转角度 m_nFlagEx=0; m_nBeamHeight=_AS_SYS_UNIT(200); //边梁高，坡道专用 m_nBeamThick=_AS_SYS_UNIT(120); //边梁厚度 m_nSlabThick=_AS_SYS_UNIT(120); //板厚或梁厚 m_nViewCtrl=0; //自动确定 m_nFlagEx |= SFEX_SECTPOS; m_dTextHeight=3.5; } TDbScissorsStair::~TDbScissorsStair() { } BOOL TDbScissorsStair::IsValid() const { BOOL bRet=TDbEntity::IsValid(); if(!bRet) return bRet; bRet=(m_nStepHeight>_DIST_SNAP && //踏步高 m_nStepWidth>_DIST_SNAP && //踏步宽 m_nStairWidth>_DIST_SNAP && //边梯段宽 m_dTextHeight>0&& //字高 m_nStepNum1>1 && //一跑步数 m_nStepNum2>1 && //二跑步数 m_nSpaceWidth-2*m_nStairWidth>-_DIST_SNAP && //楼梯间尺寸 m_nRailHeight>_DIST_SNAP && //扶手高 m_nRailWidth>_DIST_SNAP && //扶手宽 GreatEqual(m_nRailDistToSide,-(m_nSpaceWidth*0.5-m_nStairWidth)) && //扶手距边 GreatEqual(m_nBeamHeight, 0.0) &&//边梁高 GreatEqual(m_nBeamThick, 0.0) &&//边梁厚 GreatEqual(m_nSlabThick, 0.0) &&//休息台厚 m_nStairWidth>m_nRailWidth+m_nRailDistToSide); //扶手高度 return bRet; } // 提供对格式刷的支持 void TDbScissorsStair::CopyPropertiesFrom(AcDbEntity *pSrcEntity, unsigned gMatchFlag) { assertWriteEnabled(); TDbPolyPathEnt::CopyPropertiesFrom(pSrcEntity, gMatchFlag); TDbScissorsStair *pSrc=TDbScissorsStair::cast(pSrcEntity); if(pSrc) { m_nStepHeight=pSrc->m_nStepHeight; m_nStepWidth=pSrc->m_nStepWidth; m_nStairWidth=pSrc->m_nStairWidth; m_nSlabSize=pSrc->m_nSlabSize; m_nStepNum1=pSrc->m_nStepNum1; m_nStepNum2=pSrc->m_nStepNum2; m_dTextHeight=pSrc->m_dTextHeight; m_nSpaceWidth=pSrc->m_nSpaceWidth; m_nRailHeight=pSrc->m_nRailHeight; m_nRailWidth=pSrc->m_nRailWidth; m_nRailDistToSide=pSrc->m_nRailDistToSide; m_nStairFlag=pSrc->m_nStairFlag; m_nAlignment=pSrc->m_nAlignment; m_nRailDistMid=pSrc->m_nRailDistMid; m_nRailDist=pSrc->m_nRailDist; m_dSectRotation=pSrc->m_dSectRotation; m_nSectStepNum=pSrc->m_nSectStepNum; m_nStartSide=pSrc->m_nStartSide; //add by xlc on 090426箭头文字 SetTextUp(pSrc->GetTextUp()); SetTextDown(pSrc->GetTextDown()); m_nFlagEx=pSrc->m_nFlagEx; m_nBeamHeight=pSrc->m_nBeamHeight; //边梁高，坡道专用 m_nBeamThick=pSrc->m_nBeamThick; //边梁厚度 m_nSlabThick=pSrc->m_nSlabThick; //板厚或梁厚 if(database()==NULL|| pSrcEntity->database()==NULL|| database()==pSrcEntity->database()) { m_idLayerHand3d=pSrc->m_idLayerHand3d; m_idLayerStep3d=pSrc->m_idLayerStep3d; m_idLayerBeam3d=pSrc->m_idLayerBeam3d; m_idLayerRail3d=pSrc->m_idLayerRail3d; m_idLayerArrow=pSrc->m_idLayerArrow; m_idLayerText=pSrc->m_idLayerText; m_idTextStyle=pSrc->m_idTextStyle; } m_nViewCtrl=pSrc->m_nViewCtrl; } } Acad::ErrorStatus TDbScissorsStair::subGetClassID(CLSID* pClsid) const { return Acad::eOk; } // 从DWG读入数据: Acad::ErrorStatus TDbScissorsStair::dwgInFields (AcDbDwgFiler* pFiler) { assertWriteEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dwgInFields(pFiler); if(es != Acad::eOk) return es; Adesk::UInt8 nVer; pFiler->readItem(&nVer); if(nVer>g_nVersion) {// Version is too new return Acad::eMakeMeProxy; } pFiler->readItem((AcGePoint3d *)&m_ptLocation); pFiler->readItem(&m_nRotation); //旋转角度 pFiler->readItem(&m_nStepHeight); //踏步高 pFiler->readItem(&m_nStepWidth); //踏步宽 pFiler->readItem(&m_nStairWidth); //边梯段宽 pFiler->readItem(&m_nSlabSize); //休息平台尺寸 pFiler->readItem(&m_nStepNum1); //一跑步数 pFiler->readItem(&m_nStepNum2); //二跑步数 pFiler->readItem(&m_nSpaceWidth); //楼梯间尺寸 pFiler->readItem(&m_nRailHeight); //扶手高 pFiler->readItem(&m_nStairFlag); //楼层标记 pFiler->readItem(&m_nStartSide); //起步的一侧 pFiler->readItem(&m_nAlignment); //踏步取齐: 0--齐休息平台, 1--齐中间, 2--齐楼板 pFiler->readItem(&m_nRailWidth); //扶手宽 pFiler->readItem(&m_nRailDistToSide); //扶手距离边 pFiler->readItem(&m_nRailDistMid); //层间转角处扶手伸出距离 pFiler->readItem(&m_nRailDist); //层与层连接处扶手伸出距离 pFiler->readItem(&m_nSectStepNum); //剖断步数 pFiler->readItem(&m_dSectRotation); //剖断转角 pFiler->readItem(&m_dTextHeight); //字高 pFiler->readItem(&m_nFlagEx); pFiler->readItem(&m_nBeamHeight); pFiler->readItem(&m_nBeamThick); pFiler->readItem(&m_nSlabThick); pFiler->readItem(&m_idLayerHand3d); pFiler->readItem(&m_idLayerStep3d); pFiler->readItem(&m_idLayerBeam3d); pFiler->readItem(&m_idLayerRail3d); pFiler->readItem(&m_idLayerText); pFiler->readItem(&m_idTextStyle); pFiler->readItem(&m_idLayerArrow); pFiler->readItem(&m_nViewCtrl); return pFiler->filerStatus(); } Acad::ErrorStatus TDbScissorsStair::dwgOutFields(AcDbDwgFiler* pFiler) const { assertReadEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dwgOutFields(pFiler); if(es != Acad::eOk) return es; pFiler->writeItem(g_nVersion); pFiler->writeItem((AcGePoint3d &)m_ptLocation); pFiler->writeItem(m_nRotation); //旋转角度 pFiler->writeItem(m_nStepHeight); //踏步高 pFiler->writeItem(m_nStepWidth); //踏步宽 pFiler->writeItem(m_nStairWidth); //边梯段宽 pFiler->writeItem(m_nSlabSize); //休息平台尺寸 pFiler->writeItem(m_nStepNum1); //一跑步数 pFiler->writeItem(m_nStepNum2); //二跑步数 pFiler->writeItem(m_nSpaceWidth); //楼梯间宽度 pFiler->writeItem(m_nRailHeight); //扶手高度 pFiler->writeItem(m_nStairFlag); //楼层标记 pFiler->writeItem(m_nStartSide); //起步的一侧 pFiler->writeItem(m_nAlignment); //踏步取齐: 0--齐休息平台, 1--齐中间, 2--齐楼板 pFiler->writeItem(m_nRailWidth); //扶手宽 pFiler->writeItem(m_nRailDistToSide); //扶手距离边 pFiler->writeItem(m_nRailDistMid); //层间转角处扶手伸出距离 pFiler->writeItem(m_nRailDist); //层与层连接处扶手伸出距离 pFiler->writeItem(m_nSectStepNum); //剖断步数 pFiler->writeItem(m_dSectRotation); //剖断转角 pFiler->writeItem(m_dTextHeight); //字高 pFiler->writeItem(m_nFlagEx); pFiler->writeItem(m_nBeamHeight); pFiler->writeItem(m_nBeamThick); pFiler->writeItem(m_nSlabThick); pFiler->writeItem(m_idLayerHand3d); pFiler->writeItem(m_idLayerStep3d); pFiler->writeItem(m_idLayerBeam3d); pFiler->writeItem(m_idLayerRail3d); pFiler->writeItem(m_idLayerText); pFiler->writeItem(m_idTextStyle); pFiler->writeItem(m_idLayerArrow); pFiler->writeItem(m_nViewCtrl); return pFiler->filerStatus(); } Acad::ErrorStatus TDbScissorsStair::dxfInFields (AcDbDxfFiler* pFiler) { assertWriteEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dxfInFields(pFiler); if(es!=Acad::eOk) return es; if (!pFiler->atSubclassData(_T("TDbScissorsStair"))) { return Acad::eBadDxfSequence; } Adesk::Int32 fieldsFlags=0; resbuf rb; double r1, r2, r3, r4, r5, r6, r7, r8, r9; int i1, i2, i3, i4, i5; XPoint pt; while ((es == Acad::eOk) && ((es = pFiler->readResBuf(&rb)) == Acad::eOk)) { switch (rb.restype) { case AcDb::kDxfXCoord: pt=rb.resval.rpoint; fieldsFlags |= 0x01; break; case AcDb::kDxfReal: r1=rb.resval.rreal; fieldsFlags |= 0x02; break; case AcDb::kDxfReal+1: r2=rb.resval.rreal; fieldsFlags |= 0x04; break; case AcDb::kDxfReal+2: r3=rb.resval.rreal; fieldsFlags |= 0x08; break; case AcDb::kDxfReal+3: r4=rb.resval.rreal; fieldsFlags |= 0x10; break; case AcDb::kDxfReal+4: r5=rb.resval.rreal; fieldsFlags |= 0x20; break; case AcDb::kDxfReal+5: r6=rb.resval.rreal; fieldsFlags |= 0x40; break; case AcDb::kDxfReal+6: r7=rb.resval.rreal; fieldsFlags |= 0x80; break; case AcDb::kDxfReal+7: r8=rb.resval.rreal; fieldsFlags |= 0x100; break; case AcDb::kDxfReal+8: m_dTextHeight=rb.resval.rreal; break; case AcDb::kDxfReal+9: m_nRailDistMid=rb.resval.rreal; break; case AcDb::kDxfReal+11: m_nRailDist=rb.resval.rreal; break; case AcDb::kDxfReal+12: m_dSectRotation=rb.resval.rreal; break; case AcDb::kDxfAngle: r9 = rb.resval.rreal; fieldsFlags |= 0x200; break; case AcDb::kDxfInt16: i1=rb.resval.rint; fieldsFlags |= 0x400; break; case AcDb::kDxfInt16+1: i2=rb.resval.rint; fieldsFlags |= 0x800; break; case AcDb::kDxfInt16+2: i3=rb.resval.rint; fieldsFlags |= 0x1000; break; case AcDb::kDxfInt16+3: i4=rb.resval.rint; fieldsFlags |= 0x400; break; case AcDb::kDxfInt16+4: i5=rb.resval.rint; fieldsFlags |= 0x400; break; case 75: m_nViewCtrl=(Adesk::UInt8)rb.resval.rint; break; case 76: m_nSectStepNum=(int)rb.resval.rint; break; case 90: m_nFlagEx=rb.resval.rlong; break; case 145: m_nBeamHeight=rb.resval.rreal; break; case 146: m_nBeamThick=rb.resval.rreal; break; case 147: m_nSlabThick=rb.resval.rreal; break; case 412: m_idLayerStep3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 413: m_idLayerBeam3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 414: m_idLayerHand3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 415: m_idLayerRail3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 416: m_idLayerText=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 417: m_idTextStyle=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 418: m_idLayerArrow=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; //fall through intentional default: // An unrecognized group. Push it back so that // the subclass can read it again. pFiler->pushBackItem(); es = Acad::eEndOfFile; break; } } // At this point the es variable must contain eEndOfFile // - either from readResBuf() or from pushback. If not, // it indicates that an error happened and we should // return immediately. // if (es != Acad::eEndOfFile) return Acad::eInvalidResBuf; if (!(fieldsFlags&0x01)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 10")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x02)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 40")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x04)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 41")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x08)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 42")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x10)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 43")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x20)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 44")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x800)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 71")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x1000)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 72")); return Acad::eMissingDxfField; } m_ptLocation=pt; SetStepHeight(r1); SetSpaceWidth(r2); SetSlabSize(r3); SetStepWidth(r4); SetStairWidth(r5); if(fieldsFlags&0x40) SetRailHeight(r6); if(fieldsFlags&0x80) SetRailWidth(r7); if(fieldsFlags&0x100) SetRailDistToSide(r8); if(fieldsFlags&0x200) SetRotation(r9); if(fieldsFlags&0x400) SetStairFlag(i1); SetStepNum1(i2); SetStepNum2(i3); m_nStartSide=i4; m_nAlignment=i5; return pFiler->filerStatus(); } Acad::ErrorStatus TDbScissorsStair::dxfOutFields(AcDbDxfFiler* pFiler) const { assertReadEnabled(); Acad::ErrorStatus es; es = TDbPolyPathEnt::dxfOutFields(pFiler); assert(es == Acad::eOk); es = pFiler->writeItem(AcDb::kDxfSubclass,_T("TDbScissorsStair")); assert(es == Acad::eOk); pFiler->writePoint3d(AcDb::kDxfXCoord, m_ptLocation); pFiler->writeDouble(AcDb::kDxfReal, GetStepHeight()); pFiler->writeDouble(AcDb::kDxfReal+1, GetSpaceWidth()); pFiler->writeDouble(AcDb::kDxfReal+2, GetSlabSize()); pFiler->writeDouble(AcDb::kDxfReal+3, GetStepWidth()); pFiler->writeDouble(AcDb::kDxfReal+4, GetStairWidth()); pFiler->writeDouble(AcDb::kDxfReal+5, GetRailHeight()); pFiler->writeDouble(AcDb::kDxfReal+6, GetRailWidth()); pFiler->writeDouble(AcDb::kDxfReal+7, GetRailDistToSide()); pFiler->writeDouble(AcDb::kDxfReal+8, GetTextHeight()); pFiler->writeDouble(AcDb::kDxfReal+9, GetRailDistMid()); pFiler->writeDouble(AcDb::kDxfReal+11, GetRailDist()); pFiler->writeDouble(AcDb::kDxfReal+12, GetSectRotation()); pFiler->writeDouble(AcDb::kDxfAngle, GetRotation()); pFiler->writeInt16(AcDb::kDxfInt16, GetStairFlag()); pFiler->writeInt16(AcDb::kDxfInt16+1, GetStepNum1()); pFiler->writeInt16(AcDb::kDxfInt16+2, GetStepNum2()); pFiler->writeInt16(AcDb::kDxfInt16+3, m_nStartSide); pFiler->writeInt16(AcDb::kDxfInt16+4, m_nAlignment); pFiler->writeInt16(AcDb::kDxfInt16+5, m_nViewCtrl); pFiler->writeInt16(AcDb::kDxfInt16+6, m_nSectStepNum); pFiler->writeInt32(90, m_nFlagEx); pFiler->writeDouble(145, m_nBeamHeight); pFiler->writeDouble(146, m_nBeamThick); pFiler->writeDouble(147, m_nSlabThick); pFiler->writeString(412, (const TCHAR *)LayerId2String(m_idLayerStep3d)); pFiler->writeString(413, (const TCHAR *)LayerId2String(m_idLayerBeam3d)); pFiler->writeString(414, (const TCHAR *)LayerId2String(m_idLayerHand3d)); pFiler->writeString(415, (const TCHAR *)LayerId2String(m_idLayerRail3d)); pFiler->writeString(416, (const TCHAR *)LayerId2String(m_idLayerText)); pFiler->writeString(417, (const TCHAR *)LayerId2String(m_idTextStyle)); pFiler->writeString(418, (const TCHAR *)LayerId2String(m_idLayerArrow)); return pFiler->filerStatus(); } Acad::ErrorStatus TDbScissorsStair::subGetGripPoints(AcGePoint3dArray& gripPoints, AcDbIntArray& osnapModes, AcDbIntArray& geomIds) const { assertReadEnabled(); int nStepNum1=m_nStepNum1,nStepNum2=m_nStepNum2; if(m_nStartSide!=OFFSET_LEFT) { nStepNum1=m_nStepNum2; nStepNum2=m_nStepNum1; } XPoint ptMidLeft=GetMidLeft2d(), ptMidRight=GetMidRight2d(); // 0,1--移动 gripPoints.append(ptMidLeft); gripPoints.append(ptMidRight); // 2,3,4,5--楼梯间 XPoint ptLeft1, ptRight1,ptLeft2, ptRight2; double nDist=GetSlabSize()/2+(nStepNum1-1)*m_nStepWidth/2.0; ads_polar(ptMidLeft, m_nRotation-PI/2.0, nDist, ptLeft1); ads_polar(ptMidRight, m_nRotation-PI/2.0, nDist, ptRight1); ads_polar(ptMidLeft, m_nRotation+PI/2.0, nDist, ptLeft2); ads_polar(ptMidRight, m_nRotation+PI/2.0, nDist, ptRight2); gripPoints.append(ptLeft1); gripPoints.append(ptRight1); gripPoints.append(ptLeft2); gripPoints.append(ptRight2); // 6,7,8,9--楼梯宽度 ads_polar(ptLeft1, m_nRotation, GetStairWidth(), ptLeft1); ads_polar(ptRight1, m_nRotation+PI, GetStairWidth(), ptRight1); ads_polar(ptRight1, m_nRotation+PI*0.5, GetStepWidth(), ptRight1); ads_polar(ptLeft2, m_nRotation, GetStairWidth(), ptLeft2); ads_polar(ptLeft2, m_nRotation+PI*0.5, GetStepWidth(), ptLeft2); ads_polar(ptRight2, m_nRotation+PI, GetStairWidth(), ptRight2); gripPoints.append(ptLeft1); gripPoints.append(ptRight1); gripPoints.append(ptLeft2); gripPoints.append(ptRight2); double dStairWidth=0.0; //井宽 dStairWidth = GetSpaceWidth() - GetStairWidth()*2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } // 10,11,12,13--休息平台 ads_polar(ptMidLeft, m_nRotation-PI/2.0, GetSlabSize()/2, ptLeft1); ads_polar(ptMidRight, m_nRotation-PI/2.0, GetSlabSize()/2, ptRight1); ads_polar(ptMidLeft, m_nRotation+PI/2.0, GetSlabSize()/2, ptLeft2); ads_polar(ptMidRight, m_nRotation+PI/2.0, GetSlabSize()/2, ptRight2); gripPoints.append(ptLeft1); gripPoints.append(ptRight1); gripPoints.append(ptLeft2); gripPoints.append(ptRight2); { XPoint ptTmp,ptMid; //14,15--休息平台端扶手伸出距离 ads_polar(ptMidLeft, m_nRotation, m_nStairWidth+dStairWidth*0.5, ptMid); ads_polar(ptMid, m_nRotation-PI/2, m_nSlabSize/2-m_nRailDistMid, ptTmp); gripPoints.append(ptTmp); ads_polar(ptMid, m_nRotation+PI/2, m_nSlabSize/2-m_nRailDistMid, ptTmp); gripPoints.append(ptTmp); double dLen=((nStepNum1>nStepNum2)?(nStepNum1-1):(nStepNum2-1))*m_nStepWidth; //16,17--楼层连接段扶手伸出距离 ads_polar(ptMid, m_nRotation-PI/2, m_nSlabSize/2+m_nRailDist+dLen, ptTmp); gripPoints.append(ptTmp); ads_polar(ptMid, m_nRotation+PI/2, m_nSlabSize/2+m_nRailDist+dLen, ptTmp); gripPoints.append(ptTmp); } { //剖切线 double lSectPos(0),rSectPos(0); if(CalSectPos(lSectPos,rSectPos,ptLeft1,ptRight1,ptLeft2, ptRight2)) { XPoint ptMid; Midpoint(ptLeft1,ptRight1,ptMid); gripPoints.append(ptMid); gripPoints.append(ptLeft1); gripPoints.append(ptRight1); gripPoints.append(ptLeft2); gripPoints.append(ptRight2); Midpoint(ptLeft2,ptRight2,ptMid); gripPoints.append(ptMid); } } return Acad::eOk; } Acad::ErrorStatus TDbScissorsStair::subGetStretchPoints(AcGePoint3dArray & stretchPoints) const { assertReadEnabled(); XPoint ptUpLeft=GetMidLeft2d(); stretchPoints.append(ptUpLeft); return Acad::eOk; } Acad::ErrorStatus TDbScissorsStair::GetGripText(int i, CString &cs) const { switch(i) { case 0: case 1: cs=_T("移动楼梯"); break; case 2: case 3: case 4: case 5: cs=_T("改楼梯间宽度"); break; case 6: case 7: case 8: case 9: cs=_T("改梯段宽度"); break; case 10: case 11: case 12: case 13: cs=_T("改平台宽"); break; case 14: case 15: case 16: case 17: cs=_T("改扶手伸出距离"); break; case 18: case 23: cs=_T("移动剖切位置"); break; case 19: case 20: case 21: case 22: cs=_T("移动剖切角度"); break; default: break; } return Acad::eOk; } Acad::ErrorStatus TDbScissorsStair::subTransformBy(const AcGeMatrix3d& xform) { assertWriteEnabled(); TDbEntity::subTransformBy(xform); XPoint ptX, ptY; ads_polar(m_ptLocation, m_nRotation, GetSpaceWidth(), ptX); ads_polar(m_ptLocation, m_nRotation+PI/2.0, 1000.0, ptY); ((AcGePoint3d &)ptX).transformBy(xform); ((AcGePoint3d &)ptY).transformBy(xform); ((AcGePoint3d &)m_ptLocation).transformBy(xform); double nAng = CT_std_angle(ads_angle(m_ptLocation, ptY)- ads_angle(m_ptLocation, ptX)); if(fabs(nAng-PI*1.5)<_angSnap) { TchPrivate::Exchange(m_ptLocation, ptX); m_dSectRotation=-m_dSectRotation; m_nStartSide = !m_nStartSide; } m_nRotation = ads_angle(m_ptLocation, ptX); return Acad::eOk; } Acad::ErrorStatus TDbScissorsStair::subMoveGripPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset) { assertWriteEnabled(); XPoint vtOffset=*(XPoint *)&offset; vtOffset.z = 0; int nStepNum1=m_nStepNum1,nStepNum2=m_nStepNum2; if(m_nStartSide!=OFFSET_LEFT) { nStepNum1=m_nStepNum2; nStepNum2=m_nStepNum1; } double nVtRot=CT_std_angle(ads_angle(XPoint(), vtOffset)-m_nRotation); double nIncWidth=ads_distance(XPoint(), vtOffset) * cos(nVtRot); double nIncLen=ads_distance(XPoint(), vtOffset) * sin(nVtRot); int nLen=indices.length(); for (int i = 0; i < nLen; i++) { int idx = indices[i]; switch(idx) { case 0: case 1: //移动楼梯 if(nLen==1) { m_ptLocation += vtOffset; } break; case 2: case 4: //改楼梯间宽度 if(m_nSpaceWidth-nIncWidth-2*m_nStairWidth > -1.0E-6) { m_nSpaceWidth -= nIncWidth; ads_polar(XPoint(m_ptLocation), m_nRotation, nIncWidth, m_ptLocation); } else { double width=m_nSpaceWidth-m_nStairWidth*2; ads_polar(XPoint(m_ptLocation), m_nRotation, width, m_ptLocation); m_nSpaceWidth = m_nStairWidth*2; } break; case 3: case 5: //改楼梯间宽度 if(m_nSpaceWidth+nIncWidth-2*m_nStairWidth > -1.0E-6) m_nSpaceWidth += nIncWidth; else m_nSpaceWidth = m_nStairWidth*2; break; case 6: case 8: //改边梯段宽度 if(m_nStairWidth+nIncWidth > _DIST_SNAP && -1.0E-6 _DIST_SNAP && -1.0E-6_DIST_SNAP) m_nSlabSize -= nIncLen*2; break; case 12: case 13: //改休息平台尺寸 if(m_nSlabSize+nIncLen*2>_DIST_SNAP) m_nSlabSize += nIncLen*2; break; case 14: //扶手伸出距离 if(m_nRailDistMid+nIncLen>-_DIST_SNAP && m_nRailDistMid+nIncLen < m_nSlabSize/2) m_nRailDistMid += nIncLen; else if(m_nRailDistMid+nIncLen<_DIST_SNAP) m_nRailDistMid = 0; break; case 15: //扶手伸出距离 if(m_nRailDistMid-nIncLen>-_DIST_SNAP && m_nRailDistMid-nIncLen < m_nSlabSize/2) m_nRailDistMid -= nIncLen; else if(m_nRailDistMid-nIncLen<_DIST_SNAP) m_nRailDistMid = 0; break; case 16: //扶手伸出距离 { int num=(nStepNum1>nStepNum2)?nStepNum1:nStepNum2; double length=(num-1)*0.5*m_nStepWidth; if(m_nRailDist-nIncLen>-length) m_nRailDist -= nIncLen; } break; case 17: //扶手伸出距离 { int num=(nStepNum1>nStepNum2)?nStepNum1:nStepNum2; double length=(num-1)*0.5*m_nStepWidth; if(m_nRailDist+nIncLen>-length) m_nRailDist += nIncLen; } break; case 18: case 19: case 20: case 21: case 22: case 23: //剖切位置 { double lSectPos,rSectPos; XPoint ptLeft2d,ptRight2d,ptLeft1, ptRight1; double angle=m_dSectRotation; if(CalSectPos(lSectPos,rSectPos,ptLeft2d,ptRight2d,ptLeft1, ptRight1)) { XPoint ptMid; if(idx == 18 || idx == 19|| idx == 20) { Midpoint(ptLeft2d,ptRight2d,ptMid); } else { Midpoint(ptLeft1,ptRight1,ptMid); ptLeft2d=ptLeft1; ptRight2d=ptRight1; } if(idx==18||idx==23) { XPoint ptHit2d; ptHit2d=ptMid; ptHit2d += vtOffset; int nPosHit=HitSectPosByPoint2d(ptHit2d); if(nPosHit!=-1) { m_nSectStepNum = nPosHit; } } else { XPoint ptTmp; ads_polar(ptMid, m_nRotation, m_nStairWidth, ptTmp); AcGeVector3d vectFrom,vectTo; vectFrom=ptMid-ptTmp; if((idx-19)%2==0) { ptTmp=ptLeft2d+vtOffset; vectTo=ptTmp-ptMid; } else { ptTmp=ptRight2d+vtOffset; vectTo=ptMid-ptTmp; } angle=vectFrom.angleTo(vectTo,AcGeVector3d::kZAxis); SetSectRotation(angle); } } break; } default: break; } } return Acad::eOk; //return TDbEntity::moveGripPointsAt(indices, offset); } Acad::ErrorStatus TDbScissorsStair::subMoveStretchPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset) { assertWriteEnabled(); if(indices.length()) { AcGeMatrix3d mat; mat.setToTranslation(offset); subTransformBy(mat); } return Acad::eOk; } const TCHAR * TDbScissorsStair::GetDefaultLayer() const { return LAY_STAIR; } void TDbScissorsStair::GetTips(DList &lstInfo) const { lstInfo.Append(new TObjInfoUnit(_T("对象类型"), _T("交叉楼梯"))); lstInfo.Append(new TObjInfoUnit(_T("左梯步数"), XString(_T("%d"), int(GetStepNum1())))); lstInfo.Append(new TObjInfoUnit(_T("右梯步数"), XString(_T("%d"), int(GetStepNum2())))); lstInfo.Append(new TObjInfoUnit(_T("踏步高"), Dist2Str(GetStepHeight()))); lstInfo.Append(new TObjInfoUnit(_T("踏步宽"), Dist2Str(GetStepWidth()))); lstInfo.Append(new TObjInfoUnit(_T("楼梯高"), Dist2Str(GetStepHeight()*(GetStepNum1()+GetStepNum2())))); lstInfo.Append(new TObjInfoUnit(_T("梯段宽"), Dist2Str(GetStairWidth()))); lstInfo.Append(new TObjInfoUnit(_T("梯间宽"), Dist2Str(GetSpaceWidth()))); lstInfo.Append(new TObjInfoUnit(_T("扶手宽"), Dist2Str(GetRailWidth()))); lstInfo.Append(new TObjInfoUnit(_T("扶手边距"), Dist2Str(GetRailDistToSide()))); lstInfo.Append(new TObjInfoUnit(_T("平台宽"), Dist2Str(GetSlabSize()))); lstInfo.Append(new TObjInfoUnit(_T("底标高"), Dist2Str(GetElevation()))); const TCHAR *pszFloor=_T("首层"); if(m_nStairFlag==1) pszFloor=_T("中间层"); else if(m_nStairFlag==2) pszFloor=_T("顶层"); lstInfo.Append(new TObjInfoUnit(_T("楼层标记"), pszFloor)); const TCHAR *pszStep=_T("齐休息平台"); if(m_nAlignment==1) pszStep=_T("齐中间"); else if(m_nAlignment==2) pszStep=_T("齐楼板"); lstInfo.Append(new TObjInfoUnit(_T("踏步取齐"), pszStep)); lstInfo.Append(new TObjInfoUnit(_T("上楼位置"), m_nStartSide? _T("右侧") : _T("左侧"))); } //右边起步时的内侧扶手 void TDbScissorsStair::GetRailFromRight(TDbLineStair &stair1, //[in/out]左梯段 TDbLineStair &stair2, //[in/out]右梯段 XPoly2D &polyRail, //[in/out]内侧扶手 XPoint &ptStart //[in/out]扶手顶点 )const { double nDistToSide=(GetSpaceWidth()-2*GetStairWidth()<_DIST_SNAP &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double dStairWidth=0.0; //井宽 dStairWidth = m_nSpaceWidth - m_nStairWidth*2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } //梯段位置 XPoint ptLoc1, ptLoc2; ptLoc1 = stair1.GetLocation(); ptLoc2 = stair2.GetLocation(); //梯段长度 double nLen1=stair1.GetStairLength(), nLen2=stair2.GetStairLength(); double nRailDist=m_nRailDist-m_nRailWidth*0.5, nRailDistMid=m_nRailDistMid-m_nRailWidth*0.5; //扶手有连接时回缩半个扶手宽度 //扶手伸出距离为负时产生的高差 double elev1=(nRailDist/nLen1)*(stair1.GetStairHeight()-m_nStepHeight), elev2=(nRailDistMid/nLen1)*(stair1.GetStairHeight()-m_nStepHeight); if(m_nStairFlag!=SF_TOP) { BOOL bFlag=FALSE; if(m_nStairFlag!=SF_FIRST && nLen2 m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc2.z; } else { ptStart.z = ptLoc2.z-m_nStepHeight*0.5+elev1; } polyRail.AppendNode(ptStart); //右下对齐点 ads_polar(XPoint(ptStart), stair2.GetRotation(), dStairWidth + nDistToSide*2, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc2.z; } else { ptStart.z = ptLoc2.z+m_nStepHeight*0.5-elev1; } polyRail.AppendNode(ptStart); bFlag=TRUE; } if(m_nStairFlag==SF_MIDDLE) { if(nLen2>nLen1+_DIST_SNAP && m_nAlignment!=2) { //扶手在左边梯起点 ads_polar(ptLoc1, stair2.GetRotation()-PI/2, nLen1+nRailDist, ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()+PI, nDistToSide, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z=ptLoc2.z; } else { ptStart.z=ptLoc2.z-m_nStepHeight*0.5+elev1; } polyRail.AppendNode(ptStart); // 左下水平段顶点 ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0, (m_nAlignment==1? (nLen2-nLen1)/2.0 : (nLen2-nLen1)), ptStart); polyRail.AppendNode(ptStart); } else { if(!bFlag) { //扶手在左边梯起点 ads_polar(ptLoc2, stair2.GetRotation()+PI, dStairWidth + nDistToSide, ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0, nRailDist, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc2.z; } else { ptStart.z = ptLoc2.z+elev1-m_nStepHeight*0.5; } polyRail.AppendNode(ptStart); } } } } else { //右下水平段点 if(nLen2= m_nRailWidth*0.5) { ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0,dDist, ptStart); ptStart.z = ptLoc2.z + m_nStepHeight*0.5; } else { ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0,dDist+nRailDist-m_nRailWidth*0.5, ptStart); ptStart.z = ptLoc2.z + m_nStepHeight*0.5-elev1; } polyRail.AppendNode(ptStart); } } //右梯扶手下顶点 ads_polar(ptLoc2, stair2.GetRotation(), nDistToSide, ptStart); //modify by xlc on 090402 顶层扶手画法 if(m_nStairFlag==SF_TOP) { if(nRailDist>=m_nRailWidth*0.5) { ptStart.z=ptLoc2.z+m_nStepHeight*0.5; } else { ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0, nRailDist-(/*(fabs(nLen2-nLen1)<_DIST_SNAP||m_nAlignment==2)?*/m_nRailWidth*0.5/*:0*/), ptStart); ptStart.z = ptLoc2.z-elev1+m_nStepHeight*0.5; } } else { ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0,nRailDist, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0,nRailDist-m_nStepWidth*0.5, ptStart); } else { ptStart.z = ptLoc2.z - elev1 + m_nStepHeight*0.5; } } polyRail.AppendNode(ptStart); //右梯扶手上顶点 ads_polar(ptLoc2, stair2.GetRotation(), nDistToSide, ptStart); if(nRailDistMid > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0,nLen2+m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc2.z + stair2.GetStairHeight(); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0,nRailDistMid-m_nStepWidth*0.5, ptStart); } else { ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0,nLen2 + nRailDistMid,ptStart); ptStart.z = ptLoc2.z + stair2.GetStairHeight() - m_nStepHeight*0.5 + elev2; } polyRail.AppendNode(ptStart); if(nLen1 m_nStepWidth*0.5 + _DIST_SNAP) { ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0,nRailDistMid, ptStart); ptStart.z = ptLoc1.z; polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0,nRailDistMid-m_nStepWidth*0.5, ptStart); } else { ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0,nRailDistMid, ptStart); ptStart.z = ptLoc1.z + m_nStepHeight*0.5 - elev2; } polyRail.AppendNode(ptStart); //左梯扶手下顶点 ads_polar(ptLoc1, stair1.GetRotation(), nDistToSide, ptStart); if(nRailDist > m_nStepWidth*0.5 + _DIST_SNAP) { ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nLen1+m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc1.z+stair1.GetStairHeight(); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart); } else { ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nLen1+nRailDist, ptStart); ptStart.z = ptLoc1.z+stair1.GetStairHeight()-m_nStepHeight*0.5 + elev1; } polyRail.AppendNode(ptStart); } //左边起步时的内侧扶手 void TDbScissorsStair::GetRailFromLeft(TDbLineStair &stair1, //[in/out]左梯段 TDbLineStair &stair2, //[in/out]右梯段 XPoly2D &polyRail, //[in/out]内侧扶手 XPoint &ptStart //[in/out]扶手顶点 )const { double nDistToSide=(GetSpaceWidth()-2*GetStairWidth()<_DIST_SNAP &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double dStairWidth=0.0; //井宽 dStairWidth = m_nSpaceWidth - m_nStairWidth*2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } //梯段位置 XPoint ptLoc1, ptLoc2; ptLoc1 = stair1.GetLocation(); ptLoc2 = stair2.GetLocation(); //梯段长度 double nLen1=stair1.GetStairLength(), nLen2=stair2.GetStairLength(); double nRailDist=m_nRailDist-m_nRailWidth*0.5, nRailDistMid=m_nRailDistMid-m_nRailWidth*0.5; //扶手有连接时回缩半个扶手宽度 //扶手伸出距离为负时产生的高差 double elev1=nRailDist/nLen1*(stair1.GetStairHeight()-m_nStepHeight), elev2=nRailDistMid/nLen1*(stair1.GetStairHeight()-m_nStepHeight); if(m_nStairFlag!=SF_TOP) //首层或中间层 { BOOL bFlag=FALSE; // if(m_nStairFlag!=SF_FIRST && nLen2 m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z-m_nStepHeight*0.5+elev1; } polyRail.AppendNode(ptStart); //右梯下水平段顶点 ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, (m_nAlignment==1? (nLen1-nLen2)/2.0 : (nLen1-nLen2)), ptStart); polyRail.AppendNode(ptStart); bFlag=TRUE; } if(m_nStairFlag==SF_MIDDLE) { if(nLen2>nLen1+_DIST_SNAP && m_nAlignment!=2) { //扶手从右梯开始 ads_polar(ptLoc2, stair1.GetRotation()-PI/2, nLen2+nRailDist, ptStart); ads_polar(XPoint(ptStart), stair1.GetRotation()+PI, m_nStairWidth - nDistToSide, ptStart); if(nRailDist > m_nStepWidth/2+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z-m_nStepHeight*0.5+elev1; } polyRail.AppendNode(ptStart); //对齐点 ads_polar(XPoint(ptStart), stair1.GetRotation()+PI, dStairWidth + nDistToSide*2, ptStart); if(nRailDist > m_nStepWidth/2+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z+m_nStepHeight*0.5-elev1; } //ptStart.z=ptLoc1.z+m_nStepHeight*0.5; polyRail.AppendNode(ptStart); } else { if(!bFlag) { //右梯起点 ads_polar(ptLoc2, stair1.GetRotation()-PI/2, nLen2+nRailDist, ptStart); ads_polar(XPoint(ptStart), stair1.GetRotation()+PI, m_nStairWidth - nDistToSide, ptStart); if(nRailDist > m_nStepWidth/2+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z+elev1-m_nStepHeight*0.5; } polyRail.AppendNode(ptStart); } } } } else { if(nLen2>nLen1+_DIST_SNAP&&m_nAlignment!=2) { //左梯起点 ads_polar(ptLoc2, stair1.GetRotation()+PI,m_nStairWidth+dStairWidth+ nDistToSide, ptStart); if(nRailDist >= m_nRailWidth*0.5) { ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nLen2, ptStart); ptStart.z = ptLoc1.z+m_nStepHeight*0.5; } else { ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nLen2+nRailDist-m_nRailWidth*0.5, ptStart); ptStart.z=ptLoc1.z+m_nStepHeight*0.5-elev1; } polyRail.AppendNode(ptStart); } } //左梯下顶点 ads_polar(ptLoc1, stair1.GetRotation(), m_nStairWidth - nDistToSide, ptStart); //modify by xlc on 090402 顶层扶手画法 if(m_nStairFlag==SF_TOP) { if(nRailDist>=m_nRailWidth*0.5) { ptStart.z=ptLoc1.z+m_nStepHeight*0.5; } else { ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nRailDist-(/*(nLen2==nLen1||m_nAlignment==2)?*/(m_nRailWidth*0.5)/*:0*/), ptStart); ptStart.z = ptLoc1.z-elev1+m_nStepHeight*0.5; } } else { if(nRailDist > m_nStepWidth/2 + _DIST_SNAP) { ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nRailDist, ptStart); ptStart.z = ptLoc1.z; polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart); } else { ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nRailDist, ptStart); ptStart.z = ptLoc1.z+m_nStepHeight*0.5-elev1; } } polyRail.AppendNode(ptStart); //左梯上顶点 ads_polar(ptLoc1, stair1.GetRotation(), m_nStairWidth - nDistToSide, ptStart); if(nRailDistMid > m_nStepWidth*0.5 + _DIST_SNAP) { ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nLen1+m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc1.z+stair1.GetStairHeight(); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nRailDistMid-m_nStepWidth*0.5, ptStart); } else { ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nLen1+nRailDistMid, ptStart); ptStart.z = ptLoc1.z+stair1.GetStairHeight()-m_nStepHeight*0.5+elev2; } polyRail.AppendNode(ptStart); if(nLen1 m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(ptLoc2, stair2.GetRotation(), m_nStairWidth-nDistToSide, ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0, m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc2.z; polyRail.AppendNode(ptStart); } // 右梯下顶点 ads_polar(ptLoc2, stair2.GetRotation(), m_nStairWidth-nDistToSide, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nLen2+m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc2.z+stair2.GetStairHeight(); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart); } else { ads_polar(XPoint(ptStart), stair1.GetRotation()-PI/2.0, nLen2+nRailDist, ptStart); ptStart.z = ptLoc2.z+stair2.GetStairHeight()-m_nStepHeight*0.5+elev1; } polyRail.AppendNode(ptStart); } Acad::ErrorStatus TDbScissorsStair::ExplodeTo(TDbLineStair &stair1, //[in/out]左下梯段 TDbLineStair &stair2, //[in/out]右下梯段 TDbLineStair &stair3, //[in/out]左上梯段 TDbLineStair &stair4, //[in/out]右上梯段 TDbSlab &slab, //[in/out]休息平台 TDbHandRail &rail, //[in/out]内侧扶手 TDbHandRail &rail2, //[in/out]内侧扶手 TDbHandRail *pRailTop, //[out]顶层扶手 TDbHandRail *pRailTop2, //[out]顶层扶手 TDbHandRail* pRailOut1, //[out]外侧扶手 TDbHandRail*pRailOut2 //[out]外侧扶手 ) const { assertReadEnabled(); int nSectStair=GetSectStairPos(); XPoint ptUpLeft, ptUpMid, ptUpRight, ptLowLeft, ptLowMid, ptLowRight; //休息平台板的顶点 int nStepNum1=m_nStepNum1,nStepNum2=m_nStepNum2; if(m_nStartSide!=OFFSET_LEFT) { nStepNum1=m_nStepNum2; nStepNum2=m_nStepNum1; } double nLen1=(nStepNum1-1)*m_nStepWidth, nLen2=(nStepNum2-1)*m_nStepWidth; double dLeftDist = m_nSlabSize*0.5,dRightDist = m_nSlabSize*0.5;//平台中点到两侧梯段的距离 if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment != 0) { double nTemp=(m_nAlignment==1)? 2.0 : 1.0; if(nLen1 > nLen2) //左梯长 { dRightDist = m_nSlabSize*0.5+(nLen1-nLen2)/nTemp; } else { dLeftDist = m_nSlabSize*0.5+(nLen2-nLen1)/nTemp; } } ads_polar(GetMidLeft2d(), m_nRotation+PI/2.0, dRightDist, ptUpLeft); ads_polar(GetMidRight2d(), m_nRotation+PI/2.0, dLeftDist, ptUpRight); ads_polar(GetMidLeft2d(), m_nRotation-PI/2.0, dLeftDist, ptLowLeft); ads_polar(GetMidRight2d(), m_nRotation-PI/2.0, dRightDist, ptLowRight); //设置梯段宽度 stair1.SetStairWidth(m_nStairWidth); stair2.SetStairWidth(m_nStairWidth); stair3.SetStairWidth(m_nStairWidth); stair4.SetStairWidth(m_nStairWidth); //设置踏步高度 stair1.SetStepHeight(m_nStepHeight); stair2.SetStepHeight(m_nStepHeight); stair3.SetStepHeight(m_nStepHeight); stair4.SetStepHeight(m_nStepHeight); //设置踏步宽度 stair1.SetStepWidth(m_nStepWidth); stair2.SetStepWidth(m_nStepWidth); stair3.SetStepWidth(m_nStepWidth); stair4.SetStepWidth(m_nStepWidth); //设置踏步数 stair1.SetStepNum(nStepNum1); stair2.SetStepNum(nStepNum2); stair3.SetStepNum(nStepNum1); stair4.SetStepNum(nStepNum2); //设置踏步旋转角度 if(m_nStartSide == OFFSET_LEFT) { stair1.SetRotation(m_nRotation); stair2.SetRotation(CT_std_angle(m_nRotation+PI)); stair3.SetRotation(CT_std_angle(m_nRotation+PI)); stair4.SetRotation(m_nRotation); } else { stair1.SetRotation(CT_std_angle(m_nRotation+PI)); stair2.SetRotation(m_nRotation); stair3.SetRotation(m_nRotation); stair4.SetRotation(CT_std_angle(m_nRotation+PI)); } //计算梯段位置 XPoint ptLoc1, ptLoc2, ptLoc3, ptLoc4; if(m_nStartSide==OFFSET_LEFT) //左边上楼 { ads_polar(ptLowLeft, m_nRotation-PI/2, nLen1, ptLoc1); ptLoc2 = ptLowRight; ads_polar(ptUpRight, m_nRotation+PI/2, nLen1, ptLoc3); ptLoc4 = ptUpLeft; ptLoc1.z = ptLoc3.z = m_ptLocation.z; ptLoc2.z = ptLoc4.z = ptLoc1.z + nStepNum1*m_nStepHeight; } else { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth, ptLoc1); XPoint ptTmp; ads_polar(ptLowRight, m_nRotation+PI, m_nStairWidth, ptTmp); ads_polar(ptTmp, m_nRotation-PI/2, nLen2, ptLoc2); ads_polar(ptUpRight, m_nRotation+PI, m_nStairWidth, ptLoc3); ads_polar(ptUpLeft, m_nRotation, m_nStairWidth, ptTmp); ads_polar(ptTmp, m_nRotation+PI/2, nLen2, ptLoc4); ptLoc2.z = ptLoc4.z = m_ptLocation.z; ptLoc1.z = ptLoc3.z = ptLoc2.z + nStepNum2*m_nStepHeight; } //设置梯段位置 stair1.SetLocation(ptLoc1); stair2.SetLocation(ptLoc2); stair3.SetLocation(ptLoc3); stair4.SetLocation(ptLoc4); //设置梯段标记 stair1.Set3DFlag(m_nStairFlag==SF_TOP? 0 : SF_HAS3D); stair2.Set3DFlag(m_nStairFlag==SF_TOP? 0 : SF_HAS3D); stair3.Set3DFlag(m_nStairFlag==SF_TOP? 0 : SF_HAS3D); stair4.Set3DFlag(m_nStairFlag==SF_TOP? 0 : SF_HAS3D); stair1.Set2DFlag(SF_NOSECT); stair2.Set2DFlag(SF_NOSECT); stair3.Set2DFlag(SF_NOSECT); stair4.Set2DFlag(SF_NOSECT); if(m_nStairFlag==SF_FIRST) //首层 { if(nSectStair==0) //左梯剖断 { stair1.Set2DFlag(SF_1SECT); stair3.Set2DFlag(SF_1SECT); } else if(nSectStair==1) //边梯剖断 { stair2.Set2DFlag(SF_1SECT); stair4.Set2DFlag(SF_1SECT); } } else if(m_nStairFlag==SF_MIDDLE) //中间层 { if(nSectStair==0) //左梯剖断 { stair1.Set2DFlag(SF_2SECT); stair3.Set2DFlag(SF_2SECT); } else if(nSectStair==1) //右梯剖断 { stair2.Set2DFlag(SF_2SECT); stair4.Set2DFlag(SF_2SECT); } } // 设置边梁属性 /*for(int nSide=0; nSide<2; nSide++) { stair1.SetSideBeam(nSide, HasSideBeam(nSide)); stair2.SetSideBeam(nSide, HasSideBeam(nSide)); stair3.SetSideBeam(nSide, HasSideBeam(nSide)); stair4.SetSideBeam(nSide, HasSideBeam(nSide)); }*/ if(m_nStartSide==OFFSET_LEFT) { stair1.SetSideBeam(0, IsOutSideBeam()); stair2.SetSideBeam(0, IsOutSideBeam()); stair3.SetSideBeam(0, IsOutSideBeam()); stair4.SetSideBeam(0, IsOutSideBeam()); stair1.SetSideBeam(1, IsInSideBeam()); stair2.SetSideBeam(1, IsInSideBeam()); stair3.SetSideBeam(1, IsInSideBeam()); stair4.SetSideBeam(1, IsInSideBeam()); } else { stair1.SetSideBeam(1, IsOutSideBeam()); stair2.SetSideBeam(1, IsOutSideBeam()); stair3.SetSideBeam(1, IsOutSideBeam()); stair4.SetSideBeam(1, IsOutSideBeam()); stair1.SetSideBeam(0, IsInSideBeam()); stair2.SetSideBeam(0, IsInSideBeam()); stair3.SetSideBeam(0, IsInSideBeam()); stair4.SetSideBeam(0, IsInSideBeam()); } ///////////////////////////////////////////////////////////////// //扶手, 考虑了详图画法 double nDistToSide=(GetSpaceWidth()-2*GetStairWidth()<_DIST_SNAP &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double dStairWidth=0.0; //井宽 dStairWidth = m_nSpaceWidth - m_nStairWidth*2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } XPoly2D polyRail,polyRail2; //内侧扶手 XPoint ptStart,ptStart2; if(m_nStartSide==OFFSET_LEFT) //左边上楼 { GetRailFromLeft(stair1,stair2,polyRail,ptStart); GetRailFromLeft(stair3,stair4,polyRail2,ptStart2); } else //右边上楼 { GetRailFromRight(stair1,stair2,polyRail,ptStart); GetRailFromRight(stair3,stair4,polyRail2,ptStart2); } polyRail.SetFlag(0); polyRail2.SetFlag(0); if(m_nStairFlag==SF_TOP) //顶层 { //处理扶手端点 XPoint ptA, ptB; ptA = *polyRail.Head(); ads_polar(ptA, m_nRotation+PI/2, m_nRailWidth/2, ptB); // *polyRail.Head() = ptB; ptA = *polyRail2.Head(); ads_polar(ptA, m_nRotation-PI/2, m_nRailWidth/2, ptB); // *polyRail2.Head() = ptB; //顶端扶手 XPoly2D polyTopRail(0),polyTopRail2(0); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); //顶端扶手起点 polyTopRail2.AppendNode(XPoint(ptStart2.x, ptStart2.y, GetElevation()));//顶端扶手起点 if(nLen2nLen1+_DIST_SNAP && m_nAlignment!=2) { double nTemp=(m_nAlignment==1)? 2.0 : 1.0; XPoint ptTmp=ptStart; double elev=ptStart.z; ads_polar(ptLoc2, m_nRotation+PI, dStairWidth+nDistToSide, ptStart); ads_polar(ptStart, m_nRotation-PI/2.0, m_nRailDist-m_nRailWidth*0.5, ptStart);//扶手左侧下水平段点 ptStart.z = elev; polyRail.AppendNode(ptStart); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); //扶手右侧下水平段点 ads_polar(ptStart, m_nRotation, m_nStairWidth+dStairWidth+nDistToSide, ptStart); polyRail.AppendNode(ptStart); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); ads_polar(ptLoc4, m_nRotation, dStairWidth+nDistToSide, ptStart2); ads_polar(ptStart2, m_nRotation+PI/2.0, m_nRailDist-m_nRailWidth*0.5, ptStart2);//扶手右侧上水平段点 ptStart2.z = elev; polyRail2.AppendNode(ptStart2); polyTopRail2.AppendNode(XPoint(ptStart2.x, ptStart2.y, GetElevation())); //扶手右侧下水平段点 ads_polar(ptStart2, m_nRotation+PI, m_nStairWidth+dStairWidth+nDistToSide, ptStart2); polyRail2.AppendNode(ptStart2); polyTopRail2.AppendNode(XPoint(ptStart2.x, ptStart2.y, GetElevation())); } else { //顶端扶手终点 ads_polar(ptStart, m_nRotation, m_nStairWidth+dStairWidth+nDistToSide, ptStart); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); ads_polar(ptStart2, m_nRotation+PI, m_nStairWidth+dStairWidth+nDistToSide, ptStart2); polyTopRail2.AppendNode(XPoint(ptStart2.x, ptStart2.y, GetElevation())); polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } } } polyRail.SetFlag(0); rail.SetHas2D(TRUE); rail.SetHas3D(FALSE); if(pRailTop) { pRailTop->SetPathPoly(polyTopRail,GetNormal().AsAcGeVector3d()); pRailTop->SetWidth(m_nRailWidth); pRailTop->SetHeight(m_nRailHeight); pRailTop->SetStyle(TDbHandRail::RS_RAIL1); } rail2.SetHas2D(TRUE); rail2.SetHas3D(FALSE); if(pRailTop2) { pRailTop2->SetPathPoly(polyTopRail2,GetNormal().AsAcGeVector3d()); pRailTop2->SetWidth(m_nRailWidth); pRailTop2->SetHeight(m_nRailHeight); pRailTop2->SetStyle(TDbHandRail::RS_RAIL1); } } else { rail.SetHas2D(TRUE); rail.SetHas3D(TRUE); rail2.SetHas2D(TRUE); rail2.SetHas3D(TRUE); } rail.SetPathPoly(polyRail,GetNormal().AsAcGeVector3d()); rail.SetWidth(m_nRailWidth); rail.SetHeight(m_nRailHeight); rail.SetStyle(TDbHandRail::RS_RAIL1); rail2.SetPathPoly(polyRail2,GetNormal().AsAcGeVector3d()); rail2.SetWidth(m_nRailWidth); rail2.SetHeight(m_nRailHeight); rail2.SetStyle(TDbHandRail::RS_RAIL1); if(pRailOut1!=0) //左边梯外侧扶手 { XPoly2D poly; if(m_nStartSide==OFFSET_LEFT) { GetRailPoly(stair1,stair4,poly); if(m_nStairFlag == SF_TOP) { XPoint ptA, ptB; ptA = *poly.Head(); ads_polar(ptA, m_nRotation+PI/2, m_nRailWidth/2, ptB); // *poly.Head() = ptB; } } else { GetRailPoly(stair4,stair1,poly); if(m_nStairFlag == SF_TOP) { XPoint ptA, ptB; ptA = *poly.Head(); ads_polar(ptA, m_nRotation-PI/2, m_nRailWidth/2, ptB); // *poly.Head() = ptB; } } pRailOut1->SetPathPoly(poly,GetNormal().AsAcGeVector3d()); pRailOut1->SetWidth(m_nRailWidth); pRailOut1->SetHeight(m_nRailHeight); pRailOut1->SetStyle(TDbHandRail::RS_RAIL1); } if(pRailOut2!=0) //右边梯外侧扶手 { XPoly2D poly; if(m_nStartSide==OFFSET_LEFT) { GetRailPoly(stair3,stair2,poly); if(m_nStairFlag == SF_TOP) { XPoint ptA, ptB; ptA = *poly.Head(); ads_polar(ptA, m_nRotation-PI/2, m_nRailWidth/2, ptB); // *poly.Head() = ptB; } } else { GetRailPoly(stair2,stair3,poly); if(m_nStairFlag == SF_TOP) { XPoint ptA, ptB; ptA = *poly.Head(); ads_polar(ptA, m_nRotation+PI/2, m_nRailWidth/2, ptB); // *poly.Head() = ptB; } } pRailOut2->SetPathPoly(poly,GetNormal().AsAcGeVector3d()); pRailOut2->SetWidth(m_nRailWidth); pRailOut2->SetHeight(m_nRailHeight); pRailOut2->SetStyle(TDbHandRail::RS_RAIL1); } //休息平台 if(m_nSlabSize>_DIST_SNAP) { XPoly2D polySlab(1); polySlab.AppendNode(ptLowRight); polySlab.AppendNode(ptUpRight); if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment!=0) { XPoint ptTemp1, ptTemp2; if(nLen1 > nLen2-_DIST_SNAP) { ads_polar(ptUpRight, m_nRotation+PI, m_nStairWidth+dStairWidth, ptTemp1); ads_polar(ptUpLeft, m_nRotation, m_nStairWidth, ptTemp2); } else { ads_polar(ptUpRight, m_nRotation+PI, m_nStairWidth, ptTemp1); ads_polar(ptUpLeft, m_nRotation, m_nStairWidth+dStairWidth, ptTemp2); } polySlab.AppendNode(ptTemp1); polySlab.AppendNode(ptTemp2); } polySlab.AppendNode(ptUpLeft); XPoint ptMid; Midpoint(ptUpLeft,ptLowLeft,ptMid); polySlab.AppendNode(ptMid); polySlab.AppendNode(ptLowLeft); if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment!=0) { XPoint ptTemp1, ptTemp2; if(nLen1 > nLen2-_DIST_SNAP) { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth+dStairWidth, ptTemp1); ads_polar(ptLowRight, m_nRotation+PI, m_nStairWidth, ptTemp2); } else { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth, ptTemp1); ads_polar(ptLowRight, m_nRotation+PI, m_nStairWidth+dStairWidth, ptTemp2); } polySlab.AppendNode(ptTemp1); polySlab.AppendNode(ptTemp2); } if(polySlab.PathArea()>0) polySlab.Reverse(); slab.SetOutline(polySlab); if(m_nStartSide==OFFSET_LEFT) slab.SetElevation(ptLoc2.z); else slab.SetElevation(ptLoc1.z); slab.SetThickness(-m_nSlabThick); } stair1.setPropertiesFrom(this); stair2.setPropertiesFrom(this); stair3.setPropertiesFrom(this); stair4.setPropertiesFrom(this); stair1.SetBeamHeight(GetBeamHeight()); stair2.SetBeamHeight(GetBeamHeight()); stair3.SetBeamHeight(GetBeamHeight()); stair4.SetBeamHeight(GetBeamHeight()); stair1.SetBeamThick(GetBeamThick()); stair2.SetBeamThick(GetBeamThick()); stair3.SetBeamThick(GetBeamThick()); stair4.SetBeamThick(GetBeamThick()); slab.setPropertiesFrom(this); rail.setPropertiesFrom(this); rail2.setPropertiesFrom(this); if(pRailTop!=NULL) pRailTop->setPropertiesFrom(this); if(pRailTop2!=NULL) pRailTop2->setPropertiesFrom(this); if(pRailOut1!=NULL) pRailOut1->setPropertiesFrom(this); if(pRailOut2!=NULL) pRailOut2->setPropertiesFrom(this); if(m_idLayerStep3d.isValid()) { slab.setLayer(m_idLayerStep3d); stair1.SetLayerStep3d(m_idLayerStep3d); stair2.SetLayerStep3d(m_idLayerStep3d); stair3.SetLayerStep3d(m_idLayerStep3d); stair4.SetLayerStep3d(m_idLayerStep3d); } if(m_idLayerBeam3d.isValid()) { stair1.SetLayerBeam3d(m_idLayerBeam3d); stair2.SetLayerBeam3d(m_idLayerBeam3d); stair3.SetLayerBeam3d(m_idLayerBeam3d); stair4.SetLayerBeam3d(m_idLayerBeam3d); } if(m_idLayerHand3d.isValid()) { rail.setLayer(m_idLayerHand3d); rail2.setLayer(m_idLayerHand3d); if(pRailTop!=NULL) pRailTop->setLayer(m_idLayerHand3d); if(pRailTop2!=NULL) pRailTop2->setLayer(m_idLayerHand3d); if(pRailOut1!=NULL) pRailOut1->setLayer(m_idLayerHand3d); if(pRailOut2!=NULL) pRailOut2->setLayer(m_idLayerHand3d); } return Acad::eOk; } void TDbScissorsStair::GetRailPoly(TDbLineStair &stair1,TDbLineStair &stair2,XPoly2D &poly)const { double nDistToSide=(GetSpaceWidth()-2*GetStairWidth()<_DIST_SNAP*2 &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double nDist=m_nStartSide==OFFSET_LEFT?nDistToSide:-nDistToSide; XLine line1=stair1.GetSideCurve2d(m_nStartSide==OFFSET_LEFT?0:1).Offset(nDist,0); XLine line2=stair2.GetSideCurve2d(m_nStartSide==OFFSET_LEFT?0:1).Offset(nDist,0); XPoint ptTemp; { double nRailDist=m_nRailDist;//顶层扶手起点的处理 if(m_nStairFlag==SF_TOP&&m_nRailDistToSide>=-m_nRailWidth) { if(m_nRailDist>=m_nRailWidth) { nRailDist=0; } else if(m_nRailDist>=0) { double width=0;//外侧扶手起点回缩距离 int n1=stair1.GetStepNum(),n2=stair2.GetStepNum(); if(m_nAlignment==2||stair1.GetStepNum()==stair2.GetStepNum()) { nRailDist=m_nRailDist-m_nRailWidth; } else if((stair1.GetStepNum()stair2.GetStepNum()) { nRailDist=m_nRailDist-m_nRailWidth; } } else { double width=0;//外侧扶手起点回缩距离 if(m_nAlignment==2||stair1.GetStepNum()==stair2.GetStepNum()) { width=m_nRailWidth; } else if(stair1.GetStepNum()>stair2.GetStepNum()) { width=m_nRailWidth; } nRailDist=m_nRailDist-width; } } if(nRailDist > m_nStepWidth*0.5 + _DIST_SNAP) { ads_polar(XPoint(line1.StartPoint()),stair1.GetRotation()-PI/2,nRailDist,ptTemp); ptTemp.z=GetElevation(); poly.AppendNode(ptTemp); //扶手伸出点 ads_polar(XPoint(line1.StartPoint()),stair1.GetRotation()-PI/2,m_nStepWidth*0.5,ptTemp); ptTemp.z=GetElevation(); poly.AppendNode(ptTemp); //扶手拐点 } else { ads_polar(XPoint(line1.StartPoint()),stair1.GetRotation()-PI/2,nRailDist,ptTemp); double elev=0,length=0; length=stair1.GetStairLength(); elev=(nRailDist/length)*(stair1.GetStairHeight()-m_nStepHeight); ptTemp.z =GetElevation()+m_nStepHeight*0.5-elev; poly.AppendNode(ptTemp); //扶手缩回点 } //休息台段扶手 { ads_polar(XPoint(line1.EndPoint()),stair1.GetRotation()+PI/2,m_nStepWidth*0.5,ptTemp); ptTemp.z = GetElevation()+stair1.GetStairHeight(); poly.AppendNode(ptTemp); //伸出点 ads_polar(XPoint(line2.StartPoint()),stair2.GetRotation()-PI/2,m_nStepWidth*0.5,ptTemp); ptTemp.z = GetElevation()+stair1.GetStairHeight(); poly.AppendNode(ptTemp); //伸出点 } if(nRailDist > m_nStepWidth*0.5 + _DIST_SNAP) { ads_polar(XPoint(line2.EndPoint()),stair2.GetRotation()+PI/2,m_nStepWidth*0.5,ptTemp); ptTemp.z=GetElevation()+GetStairHeight(); poly.AppendNode(ptTemp); //扶手拐点 ads_polar(ptTemp,stair2.GetRotation()+PI/2,nRailDist-m_nStepWidth*0.5,ptTemp); poly.AppendNode(ptTemp); //扶手伸出点 } else { ads_polar(XPoint(line2.EndPoint()),stair2.GetRotation()+PI/2,nRailDist,ptTemp); double elev=0,length=0; length=stair2.GetStairLength(); elev=(nRailDist/length)*(stair2.GetStairHeight()-m_nStepHeight); ptTemp.z =GetElevation()+GetStairHeight()-m_nStepHeight*0.5+elev; poly.AppendNode(ptTemp); //扶手缩回点 } } } void TDbScissorsStair::GetDefaultArrow(TDbLineStair &stair1,TDbLineStair &stair2,TDbLineStair &stair3,TDbLineStair &stair4, TDbSymbArrow*pArrowUp1,TDbSymbArrow*pArrowUp2, TDbSymbArrow*pArrowDown1,TDbSymbArrow*pArrowDown2)const { assertReadEnabled(); int nSectStair=GetSectStairPos(); if(m_nStairFlag != SF_TOP && nSectStair == -1)//剖断位置不正确 return; int nSectStepNum=m_nSectStepNum; //剖断步数 if(nSectStepNum < 0) //负数调整为正的 { nSectStepNum=m_nSectStepNum+m_nStepNum1+m_nStepNum2+1; } int nStepNum1=m_nStepNum1,nStepNum2=m_nStepNum2; if(m_nStartSide!=OFFSET_LEFT) { nStepNum1=m_nStepNum2; nStepNum2=m_nStepNum1; } if(nSectStepNum==m_nStepNum1 ||nSectStepNum==m_nStepNum1+m_nStepNum2) { nSectStepNum--; } XPoint pt1,pt2,pt3,pt4,pt5,pt6,pt7,pt8,pt9,pt10,pt11,pt12,pt13,pt14,pt; /*----------点相对位置示意---------------------- *pt11 | *pt12 | | | | *pt10 | *pt13 *pt9 | *pt14 | | | | -------------------------- *pt4 | *pt5 | | | | *pt3 | *pt6 *pt2 | *pt7 | | | | *pt1 | *pt8 ------------------------------------------------*/ ads_polar(stair1.GetLocation(),stair1.GetRotation(),stair1.GetStairWidth()/2,pt); if(m_nStartSide==OFFSET_LEFT) //左边起步 { ads_polar(pt,stair1.GetRotation()-PI/2,m_nStepWidth*0.5,pt1); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-1)),pt2); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*nSectStepNum),pt3); ads_polar(stair2.GetLocation(),stair2.GetRotation(),stair2.GetStairWidth()*0.5,pt); ads_polar(pt,stair2.GetRotation()+PI/2,stair2.GetStairLength()+m_nStepWidth*0.5,pt8); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum1)),pt7); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum1-1)),pt6); ads_polar(stair3.GetLocation(),stair3.GetRotation(),stair3.GetStairWidth()*0.5,pt); ads_polar(pt,stair3.GetRotation()-PI/2,m_nStepWidth*0.5,pt12); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-1)),pt13); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*nSectStepNum),pt14); ads_polar(stair4.GetLocation(),stair4.GetRotation(),stair4.GetStairWidth()/2,pt); ads_polar(pt,stair4.GetRotation()+PI/2,stair4.GetStairLength()+m_nStepWidth*0.5,pt11); ads_polar(pt,stair4.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum1)),pt10); ads_polar(pt,stair4.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum1-1)),pt9); } else //右边起步 { ads_polar(pt,stair1.GetRotation()+PI/2,(stair1.GetStairLength()+m_nStepWidth*0.5),pt1); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum2)),pt2); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum2-1)),pt3); ads_polar(stair2.GetLocation(),stair2.GetRotation(),stair2.GetStairWidth()*0.5,pt); ads_polar(pt,stair2.GetRotation()-PI/2,m_nStepWidth/2,pt8); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-1)),pt7); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*nSectStepNum),pt6); ads_polar(stair3.GetLocation(),stair3.GetRotation(),stair3.GetStairWidth()*0.5,pt); ads_polar(pt,stair3.GetRotation()+PI/2,(stair3.GetStairLength()+m_nStepWidth*0.5),pt12); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum2)),pt13); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-nStepNum2-1)),pt14); ads_polar(stair4.GetLocation(),stair4.GetRotation(),stair4.GetStairWidth()*0.5,pt); ads_polar(pt,stair4.GetRotation()-PI/2,m_nStepWidth/2,pt11); ads_polar(pt,stair4.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-1)),pt10); ads_polar(pt,stair4.GetRotation()+PI/2,(m_nStepWidth*nSectStepNum),pt9); } ads_polar(GetMidLeft2d(),GetRotation(),GetStairWidth()*0.5,pt4); ads_polar(GetMidLeft2d(),GetRotation(),GetSpaceWidth()-GetStairWidth()*0.5,pt5); if(m_nStairFlag==SF_TOP) //顶层 { XPoly2D poly1; XPoly2D poly2; if(m_nStartSide==OFFSET_LEFT) //左梯起跑 { poly1.AppendNode(pt8); poly1.AppendNode(pt5); poly1.AppendNode(pt4); ads_polar(pt1,m_nRotation+PI*0.5,m_nStepWidth,pt1); poly1.AppendNode(pt1); poly2.AppendNode(pt11); poly2.AppendNode(pt4); poly2.AppendNode(pt5); ads_polar(pt12,m_nRotation-PI*0.5,m_nStepWidth,pt12); poly2.AppendNode(pt12); } else //右梯起跑 { poly1.AppendNode(pt1); poly1.AppendNode(pt4); poly1.AppendNode(pt5); ads_polar(pt8,m_nRotation+PI*0.5,m_nStepWidth,pt8); poly1.AppendNode(pt8); poly2.AppendNode(pt12); poly2.AppendNode(pt5); poly2.AppendNode(pt4); ads_polar(pt11,m_nRotation-PI*0.5,m_nStepWidth,pt11); poly2.AppendNode(pt11); } poly1.SetElevation(GetElevation()); poly2.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly1); pArrowDown2->SetPoly2D(poly2); } else //首层和中间层 { XPoly2D poly,poly2; if(m_nStartSide==OFFSET_LEFT) //左边起跑 { if(nSectStair==0) //左梯剖断 { poly.AppendNode(pt1); poly.AppendNode(pt2); poly2.AppendNode(pt12); poly2.AppendNode(pt13); if(m_nStairFlag==SF_MIDDLE) //中间层 { XPoly2D poly3,poly4; poly3.AppendNode(pt8); poly3.AppendNode(pt5); poly3.AppendNode(pt4); poly3.AppendNode(pt3); poly4.AppendNode(pt11); poly4.AppendNode(pt4); poly4.AppendNode(pt5); poly4.AppendNode(pt14); poly3.SetElevation(GetElevation()); poly4.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); pArrowDown2->SetPoly2D(poly4); } } else if(nSectStair==1) //右梯剖断 { poly.AppendNode(pt1); poly.AppendNode(pt4); poly.AppendNode(pt5); poly.AppendNode(pt6); poly2.AppendNode(pt12); poly2.AppendNode(pt5); poly2.AppendNode(pt4); poly2.AppendNode(pt9); if(m_nStairFlag==SF_MIDDLE) //中间层 { XPoly2D poly3,poly4; poly3.AppendNode(pt8); poly3.AppendNode(pt7); poly4.AppendNode(pt11); poly4.AppendNode(pt10); poly3.SetElevation(GetElevation()); poly4.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); pArrowDown2->SetPoly2D(poly4); } } } else //右梯起跑 { if(nSectStair==0) //左梯剖断 { poly.AppendNode(pt8); poly.AppendNode(pt5); poly.AppendNode(pt4); poly.AppendNode(pt3); poly2.AppendNode(pt11); poly2.AppendNode(pt4); poly2.AppendNode(pt5); poly2.AppendNode(pt14); if(m_nStairFlag==SF_MIDDLE) //中间层 { XPoly2D poly3,poly4; poly3.AppendNode(pt1); poly3.AppendNode(pt2); poly4.AppendNode(pt12); poly4.AppendNode(pt13); poly3.SetElevation(GetElevation()); poly4.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); pArrowDown2->SetPoly2D(poly4); } } else if(nSectStair==1) //右梯剖断 { poly.AppendNode(pt8); poly.AppendNode(pt7); poly2.AppendNode(pt11); poly2.AppendNode(pt10); if(m_nStairFlag==SF_MIDDLE) //中间层 { XPoly2D poly3,poly4; poly3.AppendNode(pt1); poly3.AppendNode(pt4); poly3.AppendNode(pt5); poly3.AppendNode(pt6); poly4.AppendNode(pt12); poly4.AppendNode(pt5); poly4.AppendNode(pt4); poly4.AppendNode(pt9); poly3.SetElevation(GetElevation()); poly4.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); pArrowDown2->SetPoly2D(poly4); } } } poly.SetElevation(GetElevation()); poly2.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly); pArrowUp2->SetPoly2D(poly2); } { pArrowUp1->setPropertiesFrom(this); //add by xlc on 090212 pArrowUp1->SetTextHeight(m_dTextHeight); //modify by xlc on 090205 pArrowUp1->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowUp1->SetText(_T("上")); pArrowUp1->SetText(GetTextUp()); pArrowUp1->SetTextAlign(TDbSymbArrow::kAtSide); pArrowUp1->SetTextLocation(pArrowUp1->GetDefaultTextLocation()); pArrowUp1->SetTextLayerId(m_idLayerText); pArrowUp1->SetTextStyleId(m_idTextStyle); pArrowUp2->setPropertiesFrom(this); //add by xlc on 090212 pArrowUp2->SetTextHeight(m_dTextHeight); pArrowUp2->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowUp2->SetText(_T("上")); pArrowUp2->SetText(GetTextUp()); pArrowUp2->SetTextAlign(TDbSymbArrow::kAtSide); pArrowUp2->SetTextLocation(pArrowUp2->GetDefaultTextLocation()); pArrowUp2->SetTextLayerId(m_idLayerText); pArrowUp2->SetTextStyleId(m_idTextStyle); pArrowDown1->setPropertiesFrom(this); //add by xlc on 090212 pArrowDown1->SetTextHeight(m_dTextHeight); pArrowDown1->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowDown1->SetText(_T("下")); pArrowDown1->SetText(GetTextDown()); pArrowDown1->SetTextAlign(TDbSymbArrow::kAtSide); pArrowDown1->SetTextLocation(pArrowDown1->GetDefaultTextLocation()); pArrowDown1->SetTextLayerId(m_idLayerText); pArrowDown1->SetTextStyleId(m_idTextStyle); pArrowDown2->setPropertiesFrom(this); //add by xlc on 090212 pArrowDown2->SetTextHeight(m_dTextHeight); pArrowDown2->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowDown2->SetText(_T("下")); pArrowDown2->SetText(GetTextDown()); pArrowDown2->SetTextAlign(TDbSymbArrow::kAtSide); pArrowDown2->SetTextLocation(pArrowDown2->GetDefaultTextLocation()); pArrowDown2->SetTextLayerId(m_idLayerText); pArrowDown2->SetTextStyleId(m_idTextStyle); if(m_idLayerArrow.isValid()) { pArrowUp1->setLayer(m_idLayerArrow); pArrowUp2->setLayer(m_idLayerArrow); pArrowDown1->setLayer(m_idLayerArrow); pArrowDown2->setLayer(m_idLayerArrow); } } } //add by xlc on 090122 获得梯段扶手线的位置 void TDbScissorsStair::GetRailPolyFromStair(TDbLineStair &stair, //[in]操作梯段 double dOffset, //[in]偏移距离 double dDistS, //[in]起始端伸出距离 double dDistE, //[in]终端伸出距离 BOOL bRight, //[in]扶手侧 XPoly2D &poly //[out]扶手线 )const { poly.Reset(); XLine line=stair.GetSideCurve2d(bRight).Offset(dOffset,0); XPoint pt=line.StartPoint(); pt.z=stair.GetElevation()+0.5*m_nStepHeight; if(dDistS<-0.5*m_nStepWidth+_DIST_SNAP) { int num=(int)fabs((dDistS-0.5*m_nStepWidth)/m_nStepWidth); ads_polar(pt, stair.GetRotation()+PI/2,m_nStepWidth*num, pt); pt.z+=m_nStepHeight*num; } poly.AppendNode(pt); pt=line.EndPoint(); pt.z=stair.GetElevation()+stair.GetStairHeight()-0.5*m_nStepHeight; if(dDistE<-0.5*m_nStepWidth+_DIST_SNAP) { int num=(int)fabs((dDistE-0.5*m_nStepWidth)/m_nStepWidth); ads_polar(pt, stair.GetRotation()-PI/2,m_nStepWidth*num, pt); pt.z-=m_nStepHeight*num; } poly.AppendNode(pt); } void TDbScissorsStair::DrawRail(XPoly2D polyPath,double nStepWidth,XExplodeDraw &dc) const { double nTotalDist=polyPath.Distance2d(); int nRailNum=AS_INT(nTotalDist/nStepWidth); if(nRailNum<1) nRailNum=1; double nStepW=nTotalDist/nRailNum; double nRailHeight=m_nRailHeight-_AS_SYS_UNIT(40); if(m_nRailDistToSide < -_DIST_SNAP)//扶手偏移距离为负时栏杆增加一个踏步高 nRailHeight += m_nStepHeight; for(int iRail=0; iRailz -= m_nStepHeight; } } dc.DrawMesh(poly2d, XVector3D(0,0,nRailHeight)); } } Acad::ErrorStatus TDbScissorsStair::ExplodeOrDraw3d(XExplodeDraw &dc) const { if(m_nViewCtrl==1) return Acad::eOk; //三维被禁止 assertReadEnabled(); TDbLineStair stair1, stair2, stair3, stair4; TDbSlab slab; TDbHandRail rail, rail2, railTop, railTop2,railOut1,railOut2; ExplodeTo(stair1, stair2, stair3, stair4, slab, rail, rail2, &railTop, &railTop2,&railOut1,&railOut2); if(m_nStairFlag==SF_TOP) { { TPushProperty vProp(&railTop, dc); if(dc.IsFullExplode()) railTop.ExplodeOrDraw3d(dc); else dc.DrawEntity(railTop); } { TPushProperty vProp(&railTop2, dc); if(dc.IsFullExplode()) railTop2.ExplodeOrDraw3d(dc); else dc.DrawEntity(railTop2); } // 内侧栏杆 if(IsAutoRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=railTop.GetOutline(); DrawRail(polyPath,m_nStepWidth,dc); //if(m_nStartSide != OFFSET_LEFT)//顶层右边栏杆 { XPoly2D polyPath=railTop2.GetOutline(); DrawRail(polyPath,m_nStepWidth,dc); } } } else { //左边梯段 { TPushProperty vProp(&stair1, dc); if(dc.IsFullExplode()) stair1.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair1); } //中间梯段 { TPushProperty vProp(&stair2, dc); if(dc.IsFullExplode()) stair2.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair2); } //右边梯段 { TPushProperty vProp(&stair3, dc); if(dc.IsFullExplode()) stair3.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair3); } //中间梯段 { TPushProperty vProp(&stair4, dc); if(dc.IsFullExplode()) stair4.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair4); } //休息平台 if(m_nSlabSize>_DIST_SNAP) { TPushProperty vProp(&slab, dc); if(dc.IsFullExplode()) slab.ExplodeOrDraw3d(dc); else dc.DrawEntity(slab); } { //外侧扶手 if(IsOutRail()) { if(dc.IsFullExplode()) { railOut1.ExplodeOrDraw3d(dc); railOut2.ExplodeOrDraw3d(dc); } else { dc.DrawEntity(railOut1); dc.DrawEntity(railOut2); } // 外侧栏杆 if(IsAutoOutRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=railOut1.GetOutline(); //add by xlc on 090121 修改栏杆画法，不作为坡道时，只在踏步中间画 // DrawRail(polyPath,m_nStepWidth,dc); // // polyPath=railOut2.GetOutline(); // DrawRail(polyPath,m_nStepWidth,dc); double nDistToSide=(GetSpaceWidth()-2*GetStairWidth()<_DIST_SNAP*2 &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; if(m_nStartSide == OFFSET_LEFT) { GetRailPolyFromStair(stair1,nDistToSide,m_nRailDist,0,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair4,nDistToSide,0,m_nRailDist,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair2,nDistToSide,0,m_nRailDist,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair3,nDistToSide,m_nRailDist,0,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } else { GetRailPolyFromStair(stair1,-nDistToSide,0,m_nRailDist,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair4,-nDistToSide,m_nRailDist,0,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair2,-nDistToSide,m_nRailDist,0,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair3,-nDistToSide,0,m_nRailDist,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } } } //内侧扶手 extern BOOL g_bInElevProcess; TPushProperty vProp(&rail, dc); if(g_bInElevProcess) { XPoly2D polyPath; AcGeVector3d normal; rail.GetPathPoly(polyPath,normal); for(int mm=0; mm_DIST_SNAP) { XPoly2D poly3d(0); poly3d.AppendNode(cv.StartPoint(), cv.GetBulge()); poly3d.AppendNode(cv.EndPoint()); rail.SetPathPoly(poly3d,normal); if(dc.IsFullExplode()) rail.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail); } } rail.SetPathPoly(polyPath,normal); } else { if(dc.IsFullExplode()) rail.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail); } TPushProperty vProp2(&rail2, dc); if(g_bInElevProcess) { XPoly2D polyPath; AcGeVector3d normal; rail2.GetPathPoly(polyPath,normal); for(int mm=0; mm_DIST_SNAP) { XPoly2D poly3d(0); poly3d.AppendNode(cv.StartPoint(), cv.GetBulge()); poly3d.AppendNode(cv.EndPoint()); rail2.SetPathPoly(poly3d,normal); if(dc.IsFullExplode()) rail2.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail2); } } rail2.SetPathPoly(polyPath,normal); } else { if(dc.IsFullExplode()) rail2.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail2); } } // 内侧栏杆 if(IsAutoRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=rail.GetOutline(); //add by xlc on 090121 修改栏杆画法，只在踏步中间画 // DrawRail(polyPath,m_nStepWidth,dc); // // polyPath=railOut2.GetOutline(); // DrawRail(polyPath,m_nStepWidth,dc); double nDistToSide=(GetSpaceWidth()-2*GetStairWidth()<_DIST_SNAP*2 &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; if(m_nStartSide == OFFSET_LEFT) { GetRailPolyFromStair(stair1,-nDistToSide,m_nRailDist,0,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair4,-nDistToSide,0,m_nRailDist,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair2,-nDistToSide,0,m_nRailDist,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair3,-nDistToSide,m_nRailDist,0,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } else { GetRailPolyFromStair(stair1,nDistToSide,0,m_nRailDist,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair4,nDistToSide,m_nRailDist,0,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair2,nDistToSide,m_nRailDist,0,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair3,nDistToSide,0,m_nRailDist,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } } } return Acad::eOk; } bool TDbScissorsStair::IsClipMe(const TEntityBase* pEnt)const { if(TDbEntity::IsClipMe(pEnt)) return true; if(pEnt->GetMe()->isKindOf(TDbColumn::desc())) return true; return false; } Acad::ErrorStatus TDbScissorsStair::ExplodeOrDraw2d(XExplodeDraw &dc) const { if(m_nViewCtrl==2) return Acad::eOk; //二维被禁止 assertReadEnabled(); CString s1=dc.Desc(),s2=XAcGiViewDraw::Descriptor(); if(_tcscmp(dc.Desc(), XAcGiViewDraw::Descriptor())==0 || g_bOsnapExpl) { XPushMemVar bExpl(g_bOsnapExpl, FALSE); XPushMemVar bFull(XExplodeStream::m_bFullExplode, TRUE); AcDbVoidPtrArray entSet; XExplodeStream dcExp(entSet); dcExp.SetPropertiesFrom(this); ExplodeOrDraw2d(dcExp); INT_PTR nQuickMarker=GetQuickMarker(); int nGsMarker=1; int nCount=entSet.length(); for(int i=0; i-GetRailWidth()) { XPoint pt; /*if(m_nStartSide==OFFSET_LEFT) { pt=stair1.GetLowLeft2d(); ads_polar(pt, m_nRotation-PI*0.5, GetRailDist()+_DIST_SNAP, pt); poly.AppendNode(pt); ads_polar(pt, m_nRotation+PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly.AppendNode(pt); ads_polar(pt, m_nRotation, GetRailDistToSide()+GetRailWidth()+3.0*_DIST_SNAP, pt); poly.AppendNode(pt); ads_polar(pt, m_nRotation-PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly.AppendNode(pt); if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } pt=stair3.GetLowLeft2d(); ads_polar(pt, m_nRotation+PI*0.5, GetRailDist()+_DIST_SNAP, pt); poly2.AppendNode(pt); ads_polar(pt, m_nRotation-PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly2.AppendNode(pt); ads_polar(pt, m_nRotation+PI, GetRailDistToSide()+GetRailWidth()+3.0*_DIST_SNAP, pt); poly2.AppendNode(pt); ads_polar(pt, m_nRotation+PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly2.AppendNode(pt); if(poly2.Length()>0) { dc.PushClip(poly2); clipCount++; } } else { pt=stair2.GetLowRight2d(); ads_polar(pt, m_nRotation-PI*0.5, GetRailDist()+_DIST_SNAP, pt); poly.AppendNode(pt); ads_polar(pt, m_nRotation+PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly.AppendNode(pt); ads_polar(pt, m_nRotation+PI, GetRailDistToSide()+GetRailWidth()+3.0*_DIST_SNAP, pt); poly.AppendNode(pt); ads_polar(pt, m_nRotation-PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly.AppendNode(pt); if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } pt=stair4.GetLowRight2d(); ads_polar(pt, m_nRotation+PI*0.5, GetRailDist()+_DIST_SNAP, pt); poly2.AppendNode(pt); ads_polar(pt, m_nRotation-PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly2.AppendNode(pt); ads_polar(pt, m_nRotation, GetRailDistToSide()+GetRailWidth()+3.0*_DIST_SNAP, pt); poly2.AppendNode(pt); ads_polar(pt, m_nRotation+PI*0.5, GetRailWidth()+_DIST_SNAP, pt); poly2.AppendNode(pt); if(poly2.Length()>0) { dc.PushClip(poly2); clipCount++; } }*/ } railOut1.setPropertiesFrom(this); railOut2.setPropertiesFrom(this); if(dc.IsFullExplode()) { railOut1.ExplodeOrDraw2d(dc); railOut2.ExplodeOrDraw2d(dc); } else { dc.DrawEntity(railOut1); dc.DrawEntity(railOut2); } for(long i=0;i_DIST_SNAP) { slab.AddTempRail(&rail); slab.AddTempRail(&rail2); if(IsOutRail()) { slab.AddTempRail(&railOut1); slab.AddTempRail(&railOut2); } if(dc.IsFullExplode()) slab.ExplodeOrDraw2d(dc); else dc.DrawEntity(slab); } } // 绘制楼板线 if((m_nStairFlag!=SF_FIRST)/*&&(m_nRailDist<0||m_nRailDist>m_nRailWidth)*/) { double nLen1=stair1.GetStairLength(),nLen2=stair2.GetStairLength(); XPoint ptFromL=m_nStartSide==OFFSET_LEFT? stair2.GetUpRight2d() : stair2.GetLowLeft2d(); XPoint ptToL=m_nStartSide==OFFSET_LEFT? stair1.GetLowRight2d() : stair1.GetUpLeft2d(); XPoint ptFrom=m_nStartSide==OFFSET_LEFT? stair4.GetUpRight2d() : stair4.GetLowLeft2d(); XPoint ptTo=m_nStartSide==OFFSET_LEFT? stair3.GetLowRight2d() : stair3.GetUpLeft2d(); //modidy by xlc on 090313 对楼板线裁剪处理 // if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment!=2) // { // double nIdent=m_nAlignment==1? (nLen2-nLen1)/2 : (nLen2-nLen1); // XPoint ptTempL,ptTemp; // if(nIdent>0) // { // ads_polar(ptToL, m_nRotation-PI/2, nIdent, ptTempL); // ads_polar(ptTo, m_nRotation+PI/2, nIdent, ptTemp); // // ads_polar(ptTempL, m_nRotation+PI/2, fabs(m_nRailDist), ptToL); // ads_polar(ptTemp, m_nRotation-PI/2, fabs(m_nRailDist), ptTo); // } // else // { // ads_polar(ptFromL, m_nRotation-PI/2, fabs(nIdent), ptTempL); // ads_polar(ptFrom, m_nRotation+PI/2, fabs(nIdent), ptTemp); // // ads_polar(ptTempL, m_nRotation+PI/2, fabs(m_nRailDist), ptFromL); // ads_polar(ptTemp, m_nRotation-PI/2, fabs(m_nRailDist), ptFrom); // } // dc << XLine(ptFromL, ptTempL) << XLine(ptTempL, ptToL) // << XLine(ptFrom, ptTemp) << XLine(ptTemp, ptTo); // } // else // { // dc << XLine(ptFromL, ptToL)<< XLine(ptFrom, ptTo); // } XPoly2D poly(1); poly.Reset(); long clipCount=0; double nRailDist=m_nRailDist; if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment!=2) { double nIdent=m_nAlignment==1? (nLen2-nLen1)/2 : (nLen2-nLen1); XPoint ptTempL,ptTemp; if(nIdent>0) { ads_polar(ptToL, m_nRotation-PI/2, nIdent, ptTempL); ads_polar(ptTo, m_nRotation+PI/2, nIdent, ptTemp); XPoint ptTmp1,ptTmp2,ptTmp3; if(nRailDist>-nIdent) { //stair1,stair2楼板线切割 ads_polar(ptToL, m_nRotation+PI, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation+PI, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation-PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); poly.AppendNode(ptTmp1); poly.AppendNode(ptTmp2); if(m_nStairFlag==SF_TOP&&m_nRailDistToSide<-m_nRailWidth&&m_nStartSide==OFFSET_LEFT) { ads_polar(ptTmp2, m_nRotation-PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp1); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation+PI, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp1); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation-PI*0.5, m_nRailWidth, ptTmp3); } else { ads_polar(ptTmp2, m_nRotation-PI*0.5, fabs(nIdent)+nRailDist, ptTmp3); } poly.AppendNode(ptTmp3); if(nRailDist<0) { ads_polar(ptFromL, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptTmp1); ads_polar(ptTmp1, m_nRotation-PI*0.5, nRailDist, ptTmp2); ads_polar(ptTmp2, m_nRotation+PI*0.5, m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp3); } else { ads_polar(ptFromL, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptTmp2); ads_polar(ptTmp2, m_nRotation-PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); if(m_nStairFlag==SF_TOP &&m_nRailDistToSide<-m_nRailWidth &&nRailDist<=m_nRailWidth &&m_nStartSide!=OFFSET_LEFT) { ads_polar(ptTmp3, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); poly.AppendNode(ptTmp2); ads_polar(ptTmp2, m_nRotation+PI*0.5, m_nRailWidth, ptTmp2); poly.AppendNode(ptTmp2); ads_polar(ptTmp2, m_nRotation+PI, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); poly.AppendNode(ptTmp2); } ads_polar(ptFromL, m_nRotation, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation+PI*0.5, m_nRailWidth, ptTmp1); ads_polar(ptTmp2, m_nRotation+PI*0.5, m_nRailWidth, ptTmp2); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation-PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); } if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } poly.Reset(); //stair3,stair4楼板线切割 ads_polar(ptTo, m_nRotation, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation+PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); poly.AppendNode(ptTmp1); poly.AppendNode(ptTmp2); if(m_nStairFlag==SF_TOP &&m_nRailDistToSide<-m_nRailWidth &&m_nStartSide==OFFSET_LEFT ) { ads_polar(ptTmp2, m_nRotation+PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp1); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp1); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation+PI*0.5, m_nRailWidth, ptTmp3); } else { ads_polar(ptTmp2, m_nRotation+PI*0.5, fabs(nIdent)+nRailDist, ptTmp3); } poly.AppendNode(ptTmp3); if(nRailDist<0) { ads_polar(ptFrom, m_nRotation+PI, m_nRailDistToSide+m_nRailWidth, ptTmp1); ads_polar(ptTmp1, m_nRotation+PI*0.5, nRailDist, ptTmp2); ads_polar(ptTmp2, m_nRotation-PI*0.5, m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp3); } else { ads_polar(ptFrom, m_nRotation+PI, m_nRailDistToSide+m_nRailWidth, ptTmp2); ads_polar(ptTmp2, m_nRotation+PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); if(m_nStairFlag==SF_TOP &&m_nRailDistToSide<-m_nRailWidth &&nRailDist<=m_nRailWidth &&m_nStartSide!=OFFSET_LEFT) { ads_polar(ptTmp3, m_nRotation+PI, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); poly.AppendNode(ptTmp2); ads_polar(ptTmp2, m_nRotation-PI*0.5, m_nRailWidth, ptTmp2); poly.AppendNode(ptTmp2); ads_polar(ptTmp2, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); poly.AppendNode(ptTmp2); } ads_polar(ptFrom, m_nRotation+PI, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation+PI, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation-PI*0.5, m_nRailWidth, ptTmp1); ads_polar(ptTmp2, m_nRotation-PI*0.5, m_nRailWidth, ptTmp2); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation+PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); } if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } } } else { ads_polar(ptFromL, m_nRotation-PI/2, fabs(nIdent), ptTempL); ads_polar(ptFrom, m_nRotation+PI/2, fabs(nIdent), ptTemp); XPoint ptTmp1,ptTmp2,ptTmp3; if(nRailDist>nIdent) { //stair1,stair2楼板线切割 ads_polar(ptFromL, m_nRotation, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation-PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); poly.AppendNode(ptTmp1); poly.AppendNode(ptTmp2); if(m_nStairFlag==SF_TOP &&m_nRailDistToSide<-m_nRailWidth &&nRailDist<=m_nRailWidth &&m_nStartSide!=OFFSET_LEFT) { ads_polar(ptTmp2, m_nRotation-PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); ads_polar(ptTmp3, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); poly.AppendNode(ptTmp2); ads_polar(ptTmp2, m_nRotation-PI*0.5, m_nRailWidth, ptTmp3); } else { ads_polar(ptTmp2, m_nRotation-PI*0.5, fabs(nIdent)+nRailDist, ptTmp3); } poly.AppendNode(ptTmp3); if(nRailDist<0) { ads_polar(ptToL, m_nRotation+PI, m_nRailDistToSide+m_nRailWidth, ptTmp1); ads_polar(ptTmp1, m_nRotation-PI*0.5, nRailDist, ptTmp2); ads_polar(ptTmp2, m_nRotation+PI*0.5, m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp3); } else { ads_polar(ptToL, m_nRotation+PI, m_nRailDistToSide+m_nRailWidth, ptTmp2); if(m_nStairFlag==SF_TOP &&m_nRailDistToSide<-m_nRailWidth &&nRailDist<=m_nRailWidth &&m_nStartSide==OFFSET_LEFT) { ads_polar(ptTmp2, m_nRotation-PI*0.5, nRailDist-m_nRailWidth, ptTmp1); ads_polar(ptTmp1, m_nRotation+PI, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); ads_polar(ptTmp2, m_nRotation-PI*0.5, m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp1); } else { ads_polar(ptTmp2, m_nRotation-PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); } ads_polar(ptToL, m_nRotation+PI, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation+PI, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation+PI*0.5, m_nRailWidth, ptTmp1); ads_polar(ptTmp2, m_nRotation+PI*0.5, m_nRailWidth, ptTmp2); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation-PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); } if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } poly.Reset(); //stair3,stair4楼板线切割 ads_polar(ptFrom, m_nRotation+PI, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation+PI, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation+PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); poly.AppendNode(ptTmp1); poly.AppendNode(ptTmp2); if(m_nStairFlag==SF_TOP &&m_nRailDistToSide<-m_nRailWidth &&nRailDist<=m_nRailWidth &&m_nStartSide!=OFFSET_LEFT) { ads_polar(ptTmp2, m_nRotation+PI*0.5, fabs(nIdent)+nRailDist-m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); ads_polar(ptTmp3, m_nRotation+PI, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); poly.AppendNode(ptTmp2); ads_polar(ptTmp2, m_nRotation+PI*0.5, m_nRailWidth, ptTmp3); } else { ads_polar(ptTmp2, m_nRotation+PI*0.5, fabs(nIdent)+nRailDist, ptTmp3); } poly.AppendNode(ptTmp3); if(nRailDist<0) { ads_polar(ptTo, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptTmp1); ads_polar(ptTmp1, m_nRotation+PI*0.5, nRailDist, ptTmp2); ads_polar(ptTmp2, m_nRotation-PI*0.5, m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp3); } else { ads_polar(ptTo, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptTmp2); if(m_nStairFlag==SF_TOP &&m_nRailDistToSide<-m_nRailWidth &&nRailDist<=m_nRailWidth &&m_nStartSide==OFFSET_LEFT) { ads_polar(ptTmp2, m_nRotation+PI*0.5, nRailDist-m_nRailWidth, ptTmp1); ads_polar(ptTmp1, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptTmp2); ads_polar(ptTmp2, m_nRotation+PI*0.5, m_nRailWidth, ptTmp3); poly.AppendNode(ptTmp3); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp1); } else { ads_polar(ptTmp2, m_nRotation+PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); } ads_polar(ptTo, m_nRotation, m_nRailDistToSide, ptTmp1); ads_polar(ptTmp1, m_nRotation, m_nRailWidth, ptTmp2); ads_polar(ptTmp1, m_nRotation-PI*0.5, m_nRailWidth, ptTmp1); ads_polar(ptTmp2, m_nRotation-PI*0.5, m_nRailWidth, ptTmp2); poly.AppendNode(ptTmp2); poly.AppendNode(ptTmp1); ads_polar(ptTmp1, m_nRotation+PI*0.5, nRailDist, ptTmp3); poly.AppendNode(ptTmp3); } if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } } } dc << XLine(ptFromL, ptTempL) << XLine(ptTempL, ptToL) << XLine(ptFrom, ptTemp) << XLine(ptTemp, ptTo); } else { if(nRailDist>0&&nRailDist0) { dc.PushClip(poly); clipCount++; } //stair3,stair4楼板线切割 poly.Reset(); if(m_nStairFlag==SF_TOP&&m_nRailDistToSide<-m_nRailWidth&&m_nStartSide!=OFFSET_LEFT) { ptTempL=ptFrom; } else ads_polar(ptFrom, m_nRotation+PI, m_nRailDistToSide+m_nRailWidth, ptTempL); if(m_nStairFlag==SF_TOP&&m_nRailDistToSide<-m_nRailWidth&&m_nStartSide==OFFSET_LEFT) { ptTempR=ptTo; } else ads_polar(ptTo, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptTempR); ads_polar(ptTempL, m_nRotation+PI*0.5, nRailDist, ptTempL); ads_polar(ptTempR, m_nRotation+PI*0.5, nRailDist, ptTempR); poly.AppendNode(ptTempL); poly.AppendNode(ptTempR); ads_polar(ptTempL, m_nRotation-PI*0.5, m_nRailWidth, ptTempL); ads_polar(ptTempR, m_nRotation-PI*0.5, m_nRailWidth, ptTempR); poly.AppendNode(ptTempR); poly.AppendNode(ptTempL); if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } } else if(nRailDist>=m_nRailWidth) //扶手遮挡 { XPoint ptTempL,ptTempR; //stair1,stair2楼板线切割 ads_polar(ptFromL, m_nRotation, m_nRailDistToSide, ptTempL); ads_polar(ptTempL, m_nRotation, m_nRailWidth, ptTempR); ads_polar(ptTempL, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempL); ads_polar(ptTempR, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempR); poly.AppendNode(ptTempL); poly.AppendNode(ptTempR); ads_polar(ptTempL, m_nRotation+PI*0.5, m_nRailWidth, ptTempL); ads_polar(ptTempR, m_nRotation+PI*0.5, m_nRailWidth, ptTempR); poly.AppendNode(ptTempR); poly.AppendNode(ptTempL); if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } poly.Reset(); ads_polar(ptToL, m_nRotation+PI, m_nRailDistToSide, ptTempL); ads_polar(ptTempL, m_nRotation+PI, m_nRailWidth, ptTempR); ads_polar(ptTempL, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempL); ads_polar(ptTempR, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempR); poly.AppendNode(ptTempL); poly.AppendNode(ptTempR); ads_polar(ptTempL, m_nRotation+PI*0.5, m_nRailWidth, ptTempL); ads_polar(ptTempR, m_nRotation+PI*0.5, m_nRailWidth, ptTempR); poly.AppendNode(ptTempR); poly.AppendNode(ptTempL); if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } //stair3,stair4楼板线切割 poly.Reset(); ads_polar(ptFrom, m_nRotation+PI, m_nRailDistToSide, ptTempL); ads_polar(ptTempL, m_nRotation+PI, m_nRailWidth, ptTempR); ads_polar(ptTempL, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempL); ads_polar(ptTempR, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempR); poly.AppendNode(ptTempL); poly.AppendNode(ptTempR); ads_polar(ptTempL, m_nRotation+PI*0.5, m_nRailWidth, ptTempL); ads_polar(ptTempR, m_nRotation+PI*0.5, m_nRailWidth, ptTempR); poly.AppendNode(ptTempR); poly.AppendNode(ptTempL); if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } poly.Reset(); ads_polar(ptTo, m_nRotation, m_nRailDistToSide, ptTempL); ads_polar(ptTempL, m_nRotation, m_nRailWidth, ptTempR); ads_polar(ptTempL, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempL); ads_polar(ptTempR, m_nRotation-PI*0.5, m_nRailWidth*0.5, ptTempR); poly.AppendNode(ptTempL); poly.AppendNode(ptTempR); ads_polar(ptTempL, m_nRotation+PI*0.5, m_nRailWidth, ptTempL); ads_polar(ptTempR, m_nRotation+PI*0.5, m_nRailWidth, ptTempR); poly.AppendNode(ptTempR); poly.AppendNode(ptTempL); if(poly.Length()>0) { dc.PushClip(poly); clipCount++; } } dc << XLine(ptFromL, ptToL)<< XLine(ptFrom, ptTo); } for(long i=0;i_DIST_SNAP) { dLen=width*tan(m_dSectRotation); } else { return FALSE; } if((len+fabs(dLen)+m_nStepWidth/3.0 )>length ||(len-fabs(dLen)-m_nStepWidth/3.0 )<_DIST_SNAP) //剖断线转角过大，不能与梯段两边都相交 { double dist=(len_DIST_SNAP) { dLen=dist; } else { dLen=-dist; } } double nStairHeight1=0,nStairHeight2=0; nStairHeight1=GetStepNum1()*GetStepHeight(); //边梯高 nStairHeight2=GetStepNum2()*GetStepHeight(); //中梯高 lSectPos=(len-dLen)/length; rSectPos=(len+dLen)/length; XPointDir2d pt; cvLeft1.Polar(len-dLen, pt); ptLeft1=pt; cvRight1.Polar(len+dLen, pt); ptRight1=pt; cvLeft2.Polar(len-dLen, pt); ptLeft2=pt; cvRight2.Polar(len+dLen, pt); ptRight2=pt; return TRUE; } //获得剖断线所在梯段：0，左梯段；1，右梯段；-1，没有剖断 int TDbScissorsStair::GetSectStairPos()const { if(m_nStairFlag==SF_TOP) return -1; if(abs(m_nSectStepNum)<1|| abs(m_nSectStepNum)>m_nStepNum1+m_nStepNum2) { return -1; } int nSectStepNum=m_nSectStepNum; //剖断步数 if(nSectStepNum < 0) //负数调整为正的 { nSectStepNum=m_nSectStepNum+m_nStepNum1+m_nStepNum2+1; } int nStepNum1=m_nStepNum1,nStepNum2=m_nStepNum2; if(m_nStartSide!=OFFSET_LEFT) { nStepNum1=m_nStepNum2; nStepNum2=m_nStepNum1; } int nSectStair; if((m_nStartSide==OFFSET_LEFT&&nSectStepNum<=nStepNum1) ||(m_nStartSide!=OFFSET_LEFT&&nSectStepNum>nStepNum2) ) { nSectStair=0; //剖断在左梯 } else { nSectStair=1; //剖断在右梯 } return nSectStair; } // 由平面二维点推算剖切步数 int TDbScissorsStair::HitSectPosByPoint2d(XPoint ptHit2d) const { TDbLineStair stair1, stair2,stair3,stair4; TDbSlab slab; TDbHandRail rail, rail2; ExplodeTo(stair1, stair2, stair3,stair4, slab, rail, rail2); XDirectionCurve cvLeft1=stair1.GetSideCurve2d(0); XDirectionCurve cvRight1=stair1.GetSideCurve2d(1); XPoly2D poly1(1); poly1.AppendNode(cvLeft1.StartPoint()); poly1.AppendNode(cvRight1.StartPoint()); poly1.AppendNode(cvRight1.EndPoint()); poly1.AppendNode(cvLeft1.EndPoint()); ptHit2d.z=0; int nStepNum1=m_nStepNum1,nStepNum2=m_nStepNum2; if(m_nStartSide!=OFFSET_LEFT) { nStepNum1=m_nStepNum2; nStepNum2=m_nStepNum1; } int nPosHit=-1; if((ptHit2d&poly1)!=PR_OUTSIDE) //下端左梯段 { XPoint ptPrj; cvLeft1.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft1.StartPoint())/m_nStepWidth); if(m_nStartSide == OFFSET_LEFT) { nPosHit += 1; } else { nPosHit += nStepNum2+1; } } else { XDirectionCurve cvLeft2=stair2.GetSideCurve2d(0); XDirectionCurve cvRight2=stair2.GetSideCurve2d(1); XPoly2D poly2(1); poly2.AppendNode(cvLeft2.StartPoint()); poly2.AppendNode(cvRight2.StartPoint()); poly2.AppendNode(cvRight2.EndPoint()); poly2.AppendNode(cvLeft2.EndPoint()); if((ptHit2d&poly2)!=PR_OUTSIDE) //下端右梯段 { XPoint ptPrj; cvLeft2.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft2.StartPoint())/m_nStepWidth); if(m_nStartSide == OFFSET_LEFT) { nPosHit += nStepNum1+1; } else { nPosHit += 1; } } else { XDirectionCurve cvLeft3=stair3.GetSideCurve2d(0); XDirectionCurve cvRight3=stair3.GetSideCurve2d(1); XPoly2D poly3(1); poly3.AppendNode(cvLeft3.StartPoint()); poly3.AppendNode(cvRight3.StartPoint()); poly3.AppendNode(cvRight3.EndPoint()); poly3.AppendNode(cvLeft3.EndPoint()); if((ptHit2d&poly3)!=PR_OUTSIDE) //上端右梯段 { XPoint ptPrj; cvLeft3.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft3.StartPoint())/m_nStepWidth); if(m_nStartSide == OFFSET_LEFT) { nPosHit += 1; } else { nPosHit += nStepNum2+1; } } else { XDirectionCurve cvLeft4=stair4.GetSideCurve2d(0); XDirectionCurve cvRight4=stair4.GetSideCurve2d(1); XPoly2D poly4(1); poly4.AppendNode(cvLeft4.StartPoint()); poly4.AppendNode(cvRight4.StartPoint()); poly4.AppendNode(cvRight4.EndPoint()); poly4.AppendNode(cvLeft4.EndPoint()); if((ptHit2d&poly4)!=PR_OUTSIDE) //剖切上端左梯段 { XPoint ptPrj; cvLeft4.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft4.StartPoint())/m_nStepWidth); if(m_nStartSide == OFFSET_LEFT) { nPosHit += nStepNum1+1; } else { nPosHit += 1; } } } } } return nPosHit; } // Attribute Access method double TDbScissorsStair::GetTextHeight()const { assertReadEnabled(); return m_dTextHeight; } void TDbScissorsStair::SetTextHeight(double h) { assertWriteEnabled(); m_dTextHeight=h; } Adesk::UInt8 TDbScissorsStair::GetStepNum1() const { assertReadEnabled(); return m_nStepNum1; } Adesk::UInt8 TDbScissorsStair::GetStepNum2() const { assertReadEnabled(); return m_nStepNum2; } double TDbScissorsStair::GetStepHeight() const { assertReadEnabled(); return m_nStepHeight; } void TDbScissorsStair::SetStepNum1(Adesk::UInt8 n) { assertWriteEnabled(); m_nStepNum1=n; } void TDbScissorsStair::SetStepNum2(Adesk::UInt8 n) { assertWriteEnabled(); m_nStepNum2=n; } double TDbScissorsStair::GetSlabSize() const { assertReadEnabled(); return m_nSlabSize; } double TDbScissorsStair::GetRailHeight() const { assertReadEnabled(); return m_nRailHeight; } double TDbScissorsStair::GetRailWidth() const { assertReadEnabled(); return m_nRailWidth; } double TDbScissorsStair::GetRailDistToSide() const { assertReadEnabled(); return m_nRailDistToSide; } double TDbScissorsStair::GetRailDistMid() const { assertReadEnabled(); return m_nRailDistMid; } double TDbScissorsStair::GetRailDist() const { assertReadEnabled(); return m_nRailDist; } double TDbScissorsStair::GetSpaceWidth() const { assertReadEnabled(); return m_nSpaceWidth; } double TDbScissorsStair::GetStairWidth() const { assertReadEnabled(); return m_nStairWidth; } double TDbScissorsStair::GetStepWidth() const { assertReadEnabled(); return m_nStepWidth; } Adesk::UInt8 TDbScissorsStair::GetStairFlag() const { assertReadEnabled(); return m_nStairFlag; } double TDbScissorsStair::GetElevation() const { assertReadEnabled(); return m_ptLocation.z; } XPoint TDbScissorsStair::GetLocation() const { assertReadEnabled(); return m_ptLocation; } double TDbScissorsStair::GetRotation() const { assertReadEnabled(); return m_nRotation; } int TDbScissorsStair::GetStartSide() const { assertReadEnabled(); return m_nStartSide; } int TDbScissorsStair::GetAlignment() const { assertReadEnabled(); return m_nAlignment; } int TDbScissorsStair::GetSectStepNum()const { assertReadEnabled(); return m_nSectStepNum; } XPoint TDbScissorsStair::GetMidRight2d() const { assertReadEnabled(); XPoint pt=GetMidLeft2d(); ads_polar(XPoint(pt), m_nRotation, m_nSpaceWidth, pt); return pt; } XPoint TDbScissorsStair::GetMidLeft2d() const { assertReadEnabled(); XPoint pt=m_ptLocation; pt.z=0; return pt; } void TDbScissorsStair::SetSlabSize(double s) { assertWriteEnabled(); m_nSlabSize=s; } void TDbScissorsStair::SetRailHeight(double l) { assertWriteEnabled(); m_nRailHeight=l; } void TDbScissorsStair::SetRailWidth(double w) { assertWriteEnabled(); m_nRailWidth=w; } void TDbScissorsStair::SetRailDistToSide(double l) { assertWriteEnabled(); m_nRailDistToSide=l; } void TDbScissorsStair::SetRailDistMid(double l) { assertWriteEnabled(); m_nRailDistMid=l; } void TDbScissorsStair::SetRailDist(double l) { assertWriteEnabled(); m_nRailDist=l; } void TDbScissorsStair::SetStairFlag(Adesk::UInt8 flag) { assertWriteEnabled(); m_nStairFlag=flag; } void TDbScissorsStair::SetSpaceWidth(double w) { assertWriteEnabled(); m_nSpaceWidth=w; } void TDbScissorsStair::SetStepWidth(double w) { assertWriteEnabled(); m_nStepWidth=w; } void TDbScissorsStair::SetStairWidth(double w) { assertWriteEnabled(); m_nStairWidth=w; } void TDbScissorsStair::SetElevation(double elev) { assertWriteEnabled(); m_ptLocation.z = elev; } void TDbScissorsStair::SetLocation(const XPoint &pt) { assertWriteEnabled(); m_ptLocation = pt; } void TDbScissorsStair::SetRotation(double rot) { assertWriteEnabled(); m_nRotation=rot; } void TDbScissorsStair::SetStartSide(int nSide) { assertWriteEnabled(); m_nStartSide=nSide; } void TDbScissorsStair::SetAlignment(int nSide) { assertWriteEnabled(); m_nAlignment=nSide; } void TDbScissorsStair::SetStepHeight(double h) { assertWriteEnabled(); m_nStepHeight=h; } void TDbScissorsStair::SetArrow(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx|=SFEX_ARROW; else m_nFlagEx&=~SFEX_ARROW; } BOOL TDbScissorsStair::IsArrow() const { return ((m_nFlagEx&SFEX_ARROW)!=0); } BOOL TDbScissorsStair::IsAutoOutRail() const { return ((m_nFlagEx&SFEX_AUTOOUTRAIL)!=0); } // TArch6 memeber BOOL TDbScissorsStair::IsAutoRail() const { return ((m_nFlagEx&SFEX_AUTORAIL)!=0); } BOOL TDbScissorsStair::IsOutRail()const { return (m_nFlagEx&SFEX_OUTRAIL)!=0; } void TDbScissorsStair::SetOutRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx|=SFEX_OUTRAIL; else m_nFlagEx&=~SFEX_OUTRAIL; } BOOL TDbScissorsStair::IsArcPlatform() const { return ((m_nFlagEx&SFEX_ARCPLAT)!=0); } BOOL TDbScissorsStair::HasSideBeam(int nSide) const { int nBitFlag=nSide? SFEX_RBEAM : SFEX_LBEAM; return ((m_nFlagEx&nBitFlag)!=0); } BOOL TDbScissorsStair::IsAscent() const { return ((m_nFlagEx&SFEX_ASCENT)!=0); } BOOL TDbScissorsStair::IsOnGround() const { return ((m_nFlagEx&SFEX_GROUND)!=0); } BOOL TDbScissorsStair::HasSlant() const { return ((m_nFlagEx&SFEX_SLANT)!=0); } void TDbScissorsStair::SetAutoOutRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_AUTOOUTRAIL; else m_nFlagEx &= ~SFEX_AUTOOUTRAIL; } void TDbScissorsStair::SetAutoRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_AUTORAIL; else m_nFlagEx &= ~SFEX_AUTORAIL; } void TDbScissorsStair::SetAscent(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_ASCENT; else m_nFlagEx &= ~SFEX_ASCENT; } void TDbScissorsStair::SetOnGround(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_GROUND; else m_nFlagEx &= ~SFEX_GROUND; } void TDbScissorsStair::SetSlant(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_SLANT; else m_nFlagEx &= ~SFEX_SLANT; } void TDbScissorsStair::SetArcPlatform(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_ARCPLAT; else m_nFlagEx &= ~SFEX_ARCPLAT; } void TDbScissorsStair::SetSideBeam(int nSide, BOOL bTrue) { assertWriteEnabled(); int nBitFlag=nSide? SFEX_RBEAM : SFEX_LBEAM; if(bTrue) m_nFlagEx |= nBitFlag; else m_nFlagEx &= ~nBitFlag; } double TDbScissorsStair::GetBeamHeight() const { return m_nBeamHeight; } double TDbScissorsStair::GetBeamThick() const { return m_nBeamThick; } double TDbScissorsStair::GetSlabThick() const { return m_nSlabThick; } AcDbObjectId TDbScissorsStair::GetLayerBeam3d() const { return m_idLayerBeam3d; } AcDbObjectId TDbScissorsStair::GetLayerStep3d() const { return m_idLayerStep3d; } AcDbObjectId TDbScissorsStair::GetLayerHand3d() const { return m_idLayerHand3d; } AcDbObjectId TDbScissorsStair::GetLayerRail3d() const { return m_idLayerRail3d; } AcDbObjectId TDbScissorsStair::GetLayerText() const { return m_idLayerText; } AcDbObjectId TDbScissorsStair::GetTextStyle() const { return m_idTextStyle; } AcDbObjectId TDbScissorsStair::GetLayerArrow() const { return m_idLayerArrow; } void TDbScissorsStair::SetBeamHeight(double val) { assertWriteEnabled(); m_nBeamHeight = val; } void TDbScissorsStair::SetSlabThick(double val) { assertWriteEnabled(); m_nSlabThick=val; } void TDbScissorsStair::SetBeamThick(double val) { assertWriteEnabled(); m_nBeamThick=val; } void TDbScissorsStair::SetLayerBeam3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerBeam3d=idLayer; } void TDbScissorsStair::SetLayerStep3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerStep3d=idLayer; } void TDbScissorsStair::SetLayerHand3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerHand3d=idLayer; } void TDbScissorsStair::SetLayerRail3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerRail3d=idLayer; } void TDbScissorsStair::SetLayerText(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerText=idLayer; } void TDbScissorsStair::SetTextStyle(AcDbObjectId idStyle) { assertWriteEnabled(); m_idTextStyle=idStyle; } void TDbScissorsStair::SetLayerArrow(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerArrow=idLayer; } void TDbScissorsStair::SetSectStepNum(int n) { assertWriteEnabled(); m_nSectStepNum=n; } double TDbScissorsStair::GetSectRotation()const { return m_dSectRotation; } void TDbScissorsStair::SetSectRotation(double r) { assertWriteEnabled(); m_dSectRotation=r; } //add by xlc 090426，箭头文字，动态数据 CString TDbScissorsStair::GetTextUp() const { assertReadEnabled(); CString sVal(_T("上")); const TEntityFields &fd = GetFields(); fd.GFD(_T("上楼箭头文字"), sVal); return sVal; } void TDbScissorsStair::SetTextUp(const TCHAR *sVal) { assertWriteEnabled(); TEntityFields &fd = Fields(); fd.SFD(_T("上楼箭头文字"), sVal); } CString TDbScissorsStair::GetTextDown() const { assertReadEnabled(); CString sVal(_T("下")); const TEntityFields &fd = GetFields(); fd.GFD(_T("下楼箭头文字"), sVal); return sVal; } void TDbScissorsStair::SetTextDown(const TCHAR *sVal) { assertWriteEnabled(); TEntityFields &fd = Fields(); fd.SFD(_T("下楼箭头文字"), sVal); } // sg add 101115，支持统一标高 bool TDbScissorsStair::UnifyElevation(double dElevation) { assertWriteEnabled(); SetElevation(dElevation); return true; } // cet 2013.9.5 add CString TDbScissorsStair::GetXml(const AcGeMatrix3d& mat) const { CString sXml; AcDbVoidPtrArray arrEnts; explode(arrEnts); int nSize = arrEnts.length(); for (int i = 0; i < nSize; ++i) { AcDbEntity *pEnt = (AcDbEntity*)arrEnts[i]; if (pEnt == NULL) { continue; } TDbLineStair *pLineStair = TDbLineStair::cast(pEnt); if (pLineStair != NULL) { sXml += pLineStair->GetXml(mat); continue; } TDbSlab *pSlab = TDbSlab::cast(pEnt); if (pSlab != NULL) { sXml += pSlab->GetXml(mat); } } ReleaseEntSet(arrEnts); return sXml; } ///////////////////////////////////////////////////////////////////////////// void InitDbScissorsStair(BOOL bTrue) { if(bTrue) { TDbScissorsStair::rxInit(); acrxBuildClassHierarchy(); TDbScissorsStair::InitMatchProtocol(TRUE); } else { TDbScissorsStair::InitMatchProtocol(FALSE); deleteAcRxClass(TDbScissorsStair::desc()); } }