#include "stdafx.h"
#include "DbRadiator.h"
#include "DbPipe.h"
#include "DbRect.h"
#include "PipeTools.h"
#include "dbtext.h"

ACRX_DXF_DEFINE_MEMBERS(ATSRadiator, ATSPipeNode, AcDb::kDHL_CURRENT, AcDb::kMReleaseCurrent, 
						1, ATS_RADIATOR, "ATS_RADIATOR图形无法解析, 请下载上华软件|网址: www.shanghuasoft.com");
IMPLEMENT_TENTBASE(TDbRadiator);


// const Adesk::UInt8 TDbRadiator::g_nVersion = 1;
const Adesk::UInt8 TDbRadiator::g_nVersion = 2; // sg modify
extern BOOL Is2DView();

#define SHOW_UNIT _T("ShowUnit") // 是否显示单位i

//////////////////////////////////////////////////////////////////////
// Construction
//////////////////////////////////////////////////////////////////////
TDbRadiator::TDbRadiator():
m_typeIFace(kSide), m_dSysAngle(0), m_bHasValve(TRUE), m_bIsReverse(FALSE),
m_nType(0), m_dWeight(0.35), m_dLoad(1000)
{
	m_visibility = TPipeSys::kVisible;
	m_dSizeX = 800.0;
	m_dSizeY = 200.0;
	m_dSizeZ = 600.0;
	m_dRotation = 0.0;

	// 添加2个接口
	TPipeInterface iFace;
	iFace.m_faceType = TPipeInterface::kBoundry;
	iFace.m_flowDir = TPipeSys::kInlet; // 第1个接口流进
	AddInterface(iFace);
	
	iFace.m_flowDir = TPipeSys::kOutlet; // 第2个接口流出
	AddInterface(iFace);

	m_iDrawMode = 0;
	m_iNum = 20;
	m_dNum = 1.0; // sg add

	m_sFactory = _T("无");
	m_sType = _T("无");
	m_nFormula = 0;
	m_dA = 0;
	m_dB = 0;
	m_dUnitArea = 0;
	m_dUnitQ = 0;
}

//////////////////////////////////////////////////////////////////////
// Override TDbEntity
//////////////////////////////////////////////////////////////////////
void TDbRadiator::CopyPropertiesFrom(AcDbEntity *pSrc, unsigned gMatchFlag)
{
	assertWriteEnabled();
	TDbPipeNode::CopyPropertiesFrom(pSrc, gMatchFlag);
	TDbRadiator *pRadiator = TDbRadiator::cast(pSrc);
	if (pRadiator != NULL)
	{
		m_dSizeX = pRadiator->m_dSizeX;
		m_dSizeY = pRadiator->m_dSizeY;
		m_dSizeZ = pRadiator->m_dSizeZ;
		m_bHasValve = pRadiator->m_bHasValve;
		m_bIsReverse = pRadiator->m_bIsReverse;

		m_dRotation = pRadiator->m_dRotation;
		m_dSysAngle = pRadiator->m_dSysAngle;
		m_dWeight = pRadiator->m_dWeight;
		m_iDrawMode = pRadiator->m_iDrawMode;
		m_iNum = pRadiator->m_iNum;
		m_dLoad = pRadiator->m_dLoad;
		m_dNum = pRadiator->m_dNum;
		m_sFactory = pRadiator->m_sFactory;
		m_sType = pRadiator->m_sType;
		m_nFormula = pRadiator->m_nFormula;
		m_dA = pRadiator->m_dA;
		m_dB = pRadiator->m_dB;
		m_dUnitArea = pRadiator->m_dUnitArea;
		m_dUnitQ = pRadiator->m_dUnitQ;
	}	
}
//AOLAPI double g_nAcadVer;

Acad::ErrorStatus TDbRadiator::subGetClassID(CLSID* pClsid) const
{
// delete by hh 2013-1-15 18及以上平台 开启特性表
//	if (g_nAcadVer > 17.19)
//		return Acad::eOk;

	return Acad::eOk;
}

// 取动态属性显示数据
void TDbRadiator::GetTips(DList<TObjInfoUnit> &info) const
{
	info.Append(new TObjInfoUnit(_T("对象类型"), _T("散热器")));

	BOOL bValidIn = FALSE;
	BOOL bValidOut = FALSE;
	if (m_lstInterface.Length() == 2)
	{
		bValidIn = HasInPipe();
		bValidOut = HasOutPipe();
	}

	info.Append(new TObjInfoUnit(_T("散热器厂家"), m_sFactory));
	info.Append(new TObjInfoUnit(_T("散热器型号"), m_sType));
	info.Append(new TObjInfoUnit(_T("散热器长"), Dist2Str(m_dSizeX)));
	info.Append(new TObjInfoUnit(_T("散热器宽"), Dist2Str(m_dSizeY)));
	info.Append(new TObjInfoUnit(_T("散热器高"), Dist2Str(m_dSizeZ)));
	info.Append(new TObjInfoUnit(_T("负荷"), XString(_T("%.1f"), m_dLoad)));
	if (m_iDrawMode == 1)
	{
		info.Append(new TObjInfoUnit(_T("片数"), XString(_T("%.d"), m_iNum)));
	}
	else if (m_iDrawMode == 3)
	{
		info.Append(new TObjInfoUnit(_T("片数"), XString(_T("%.1f"), m_dNum)));
	}
	info.Append(new TObjInfoUnit(_T("进口连接"), bValidIn? _T("完成") : _T("未连")));
	info.Append(new TObjInfoUnit(_T("出口连接"), bValidOut? _T("完成") : _T("未连")));
}


//////////////////////////////////////////////////////////////////////
// Override AcTDbEntity
//////////////////////////////////////////////////////////////////////
Acad::ErrorStatus 
TDbRadiator::subGetOsnapPoints(AcDb::OsnapMode	       osnapMode,
							 INT_PTR                   gsSelectionMark,
							 const AcGePoint3d&    ptPick,
							 const AcGePoint3d&    lastPoint,
							 const AcGeMatrix3d&   viewXform,
							 AcGePoint3dArray&     snapPoints,
							 AcDbIntArray&         geomIds) const
{
	Acad::ErrorStatus es = Acad::eOk;
	if (osnapMode == AcDb::kOsModeIns || osnapMode == AcDb::kOsModeCen ||
		osnapMode == AcDb::kOsModeNode)
	{
		snapPoints.append(m_ptLocation);
	}

	es = TDbPipeNode::subGetOsnapPoints(osnapMode, gsSelectionMark, ptPick,
		lastPoint, viewXform, snapPoints, geomIds);
	return es;
}

Acad::ErrorStatus
TDbRadiator::GetGripText(int idx, CString &cs) const
{
	Acad::ErrorStatus es = Acad::eOk;
	switch(idx) {
	case 0:
		cs = _T("流进接口");
		break;
	case 1:
		cs = _T("流出接口");
		break;
	case 2:
		cs = _T("移动散热器");
		break;
	case 3:
		cs = _T("移动标注点");
		break;
	default:
		es = Acad::eInvalidInput;
	}
	return es;
}

Acad::ErrorStatus
TDbRadiator::subGetGripPoints(AcGePoint3dArray& gripPoints,
                           AcDbIntArray&  osnapModes,
                           AcDbIntArray&  geomIds) const
{
	assertReadEnabled();
	Acad::ErrorStatus es = Acad::eOk;
	es = TDbPipeNode::subGetGripPoints(gripPoints, osnapModes, geomIds);
	if (es != Acad::eOk)
	{
		return es;
	}
	return GetGSPoints(gripPoints);
}

Acad::ErrorStatus
TDbRadiator::subGetStretchPoints(AcGePoint3dArray & stretchPoints) const
{ 
	assertReadEnabled();
	Acad::ErrorStatus es = Acad::eOk;
	es = TDbPipeNode::subGetStretchPoints(stretchPoints);
	if (es != Acad::eOk)
	{
		return es;
	}
	return GetGSPoints(stretchPoints);
}

Acad::ErrorStatus
TDbRadiator::GetGSPoints(AcGePoint3dArray & stretchPoints) const
{
	Acad::ErrorStatus es = Acad::eOk;
	XPoint pt1, pt2, pt3, pt4;
	if (GetExplodeMode()==DRAW_2D || IsSysType())
	{
		GetVertexs2d(pt1, pt2, pt3, pt4);
	}
	else
	{
		GetRectVertexs(pt1, pt2, pt3, pt4, FALSE);
	}
	stretchPoints.append(m_ptLocation);

	if (!!m_ptLabel)
	{
		stretchPoints.append(m_ptLabel);
	}
	return es;
}

Acad::ErrorStatus
TDbRadiator::subMoveGripPointsAt(const AcDbIntArray& indices,
							  const AcGeVector3d& offset)
{
	assertWriteEnabled();
	Acad::ErrorStatus es = MoveGSPointsAt(indices, offset);
	if (objectId().isValid())
	{
		ApplyChangeToPipe();
	}
	return es;
}

Acad::ErrorStatus
TDbRadiator::MoveGSPointsAt(const AcDbIntArray& indices,
							const AcGeVector3d& offset)
{
	assertWriteEnabled();
	Acad::ErrorStatus es = Acad::eOk;
	XPoint ptFix = m_ptLocation;
	int idx = 0;
	for (int i = 0; i < indices.length(); i++)
	{
		idx = indices[i];
		switch(idx) {
		case 2:
			{
				m_ptLocation += offset;
				OutLocation() += offset;
				InLocation() += offset;
				break;
			}
		case 3:
			{
				m_ptLabel += offset;
				break;
			}
		default:
			break;
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus
TDbRadiator::subMoveStretchPointsAt(const AcDbIntArray& indices,
								 const AcGeVector3d& offset)
{
	assertWriteEnabled();
	Acad::ErrorStatus es = Acad::eOk;
	es = TDbPipeNode::subMoveStretchPointsAt(indices, offset);
	if (es != Acad::eOk)
	{
		return es;
	}
	return MoveGSPointsAt(indices, offset);
}

Acad::ErrorStatus TDbRadiator::subTransformBy(const AcGeMatrix3d& xform)
{
	assertWriteEnabled();

	/*TDbPipeNode::subTransformBy(xform);
	m_ptLocation.TransformBy(xform);
	if (!!m_ptLabel)
	{
		m_ptLabel.TransformBy(xform); // gesp added
	}

	XVector3D vtRot(cos(m_dRotation), sin(m_dRotation));
	((AcGeVector3d &)vtRot).transformBy(xform);
	m_dRotation = ads_angle(XPoint(), vtRot);

	// 系统图的角度 ywb 2009-6-11
	XVector3D vtRot1(cos(m_dSysAngle), sin(m_dSysAngle));
	((AcGeVector3d &)vtRot1).transformBy(xform);
	m_dSysAngle = ads_angle(XPoint(), vtRot1);*/

	//	if (objectId().isValid()) {
	//		ApplyChangeToPipe();
	//	} // gesp

	// change by hh 2012-08-16 move或copy时，忽略标高差
	AcGeMatrix3d matNew(xform);
	XString &sCmd = GetCurDocData()->m_sCurCommand;
	if((0 == _tcsicmp(sCmd, _T("move")) || 0 == _tcsicmp(sCmd, _T("copy")) 
		|| 0 == _tcsicmp(sCmd, _T("pasteclip"))) && Is2DView()) 
	{
		/*AcGeVector3d vtNoneZ = xform.translation();
		vtNoneZ = vtNoneZ.orthoProject(GetUcsZvt());
		matNew.setToTranslation(vtNoneZ);*/
		// delete by yxx 20150708 修改散热器在ucs下角度问题
	}
	TDbPipeNode::subTransformBy(matNew);
	m_ptLocation.TransformBy(matNew);
	if (!!m_ptLabel)
	{
		m_ptLabel.TransformBy(matNew);
	}

	XVector3D vtRot(cos(m_dRotation), sin(m_dRotation));
	((AcGeVector3d &)vtRot).transformBy(matNew);
	m_dRotation = ads_angle(XPoint(), vtRot);

	// 系统图的角度
	XVector3D vtRot1(cos(m_dSysAngle), sin(m_dSysAngle));
	((AcGeVector3d &)vtRot1).transformBy(matNew);
	m_dSysAngle = ads_angle(XPoint(), vtRot1);

	return Acad::eOk;
}


//////////////////////////////////////////////////////////////////////
// 读写数据
//////////////////////////////////////////////////////////////////////
Acad::ErrorStatus TDbRadiator::dwgInFields(AcDbDwgFiler* pFiler)
{
	assertWriteEnabled();
	Acad::ErrorStatus es = TDbPipeNode::dwgInFields(pFiler);
	if (es != Acad::eOk)
	{
		return es;
	}
	es = TLabelStyle::dwgInFields(pFiler);
	if (es != Acad::eOk)
	{
		return es;
	}

	Adesk::UInt8  nVer;
	pFiler->readItem(&nVer);
	if (nVer > g_nVersion) // Version is too new
	{
		return Acad::eMakeMeProxy;
	}

	pFiler->readItem((AcGePoint3d *)&m_ptLocation);
	pFiler->readItem((AcGePoint3d *)&m_ptLabel);

	pFiler->readItem(&m_dRotation);
	pFiler->readItem(&m_dSizeX);
	pFiler->readItem(&m_dSizeY);
	pFiler->readItem(&m_dSizeZ);

	pFiler->readItem(&m_dSysAngle);
	//pFiler->readItem(&m_bHasValve);
	//pFiler->readItem(&m_bIsReverse);
	FilerRead(pFiler, m_bHasValve);
	FilerRead(pFiler, m_bIsReverse);
	pFiler->readItem(&m_nType);
	pFiler->readItem(&m_dWeight);
	pFiler->readItem(&m_iNum);
	pFiler->readItem(&m_iDrawMode);
	pFiler->readItem(&m_idLabelLayer);
	pFiler->readItem(&m_dLoad);
	if (nVer > 1)
	{
		pFiler->readItem(&m_dNum);
		ReadString(pFiler, m_sFactory);
		ReadString(pFiler, m_sType);
		pFiler->readItem(&m_nFormula);
		pFiler->readItem(&m_dA);
		pFiler->readItem(&m_dB);
		pFiler->readItem(&m_dUnitArea);
		pFiler->readItem(&m_dUnitQ);
	}
	else
	{
		m_dNum = 1.0;
		m_sFactory = _T("无");
		m_sType = _T("无");
		m_nFormula = 0;
		m_dA = 0;
		m_dB = 0;
		m_dUnitArea = 0;
		m_dUnitQ = 0;

	}
	return pFiler->filerStatus();
}

Acad::ErrorStatus TDbRadiator::dwgOutFields(AcDbDwgFiler* pFiler) const
{
	assertReadEnabled();
	Acad::ErrorStatus es = TDbPipeNode::dwgOutFields(pFiler);
	if (es != Acad::eOk)
	{
		return es;
	}
	es = TLabelStyle::dwgOutFields(pFiler);
	if (es != Acad::eOk)
	{
		return es;
	}

// 	if (g_nSaveTArchVer == 7) // 8.0使用
// 	{
// 		pFiler->writeItem((Adesk::UInt8)1);
// 	}
// 	else
// 	{
// 		pFiler->writeItem(g_nVersion);
// 	}
	pFiler->writeItem(g_nVersion);
	pFiler->writeItem((const AcGePoint3d &)m_ptLocation);
	pFiler->writeItem((const AcGePoint3d &)m_ptLabel);

	pFiler->writeItem(m_dRotation);
	pFiler->writeItem(m_dSizeX);
	pFiler->writeItem(m_dSizeY);
	pFiler->writeItem(m_dSizeZ);

	pFiler->writeItem(m_dSysAngle);
	//pFiler->writeItem(m_bHasValve);
	//pFiler->writeItem(m_bIsReverse);
	FilerWrite(pFiler, m_bHasValve);
	FilerWrite(pFiler, m_bIsReverse);
	pFiler->writeItem(m_nType);
	pFiler->writeItem(m_dWeight);

	pFiler->writeItem(m_iNum);
	pFiler->writeItem(m_iDrawMode);
	pFiler->writeItem(m_idLabelLayer);
	pFiler->writeItem(m_dLoad);

// 	if (g_nSaveTArchVer > 7) // 8.0使用
// 	{
	pFiler->writeItem(m_dNum);
	pFiler->writeItem((const TCHAR *)m_sFactory);
	pFiler->writeItem((const TCHAR *)m_sType);
	pFiler->writeItem(m_nFormula);
	pFiler->writeItem(m_dA);
	pFiler->writeItem(m_dB);
	pFiler->writeItem(m_dUnitArea);
	pFiler->writeItem(m_dUnitQ);
// 	}
	return pFiler->filerStatus();
}

Acad::ErrorStatus TDbRadiator::dxfInFields(AcDbDxfFiler* pFiler)
{
	assertWriteEnabled();
	Acad::ErrorStatus es = TDbPipeNode::dxfInFields(pFiler);
	if (es!=Acad::eOk)
	{
		return es;
	}

	if (!pFiler->atSubclassData(_T("TDbRadiator")))
	{
		return Acad::eBadDxfSequence;
	}
	return pFiler->filerStatus();
}

Acad::ErrorStatus TDbRadiator::dxfOutFields(AcDbDxfFiler* pFiler) const
{
	Acad::ErrorStatus es;
	es = TDbPipeNode::dxfOutFields(pFiler);
	assert(es == Acad::eOk);
	es = pFiler->writeItem(AcDb::kDxfSubclass, _T("TDbRadiator"));
	assert(es == Acad::eOk);
	return es;
}


//////////////////////////////////////////////////////////////////////
// 有关Rect
//////////////////////////////////////////////////////////////////////
void TDbRadiator::AsRect(TDbRect &rect) const
{
	rect.setPropertiesFrom(this);
	rect.SetCenter(m_ptLocation);
	rect.SetSizeX(m_dSizeX);
	rect.SetSizeY(m_dSizeY);
	rect.SetSizeZ(m_dSizeZ);
	rect.SetRotation(m_dRotation);
}
void TDbRadiator::GetVertexs2d(XPoint &pt1, XPoint &pt2, XPoint &pt3,
							   XPoint &pt4) const
{
	if (IsSysType())
	{
		GetSysVertexs2d(pt1, pt2, pt3, pt4);
	}
	else
	{
		GetRectVertexs(pt1, pt2, pt3, pt4, TRUE);
	}
}

void TDbRadiator::GetSysVertexs2d(XPoint &pt1, XPoint &pt2, XPoint &pt3,
								  XPoint &pt4) const
{
	double dAngle = CT_std_angle(m_dSysAngle);
	double dSizeX = cos(dAngle) * m_dSizeX;
	double dSubZ  = sin(dAngle) * m_dSizeX;

	pt1.x = m_ptLocation.x;
	pt1.y = m_ptLocation.y - m_dSizeZ/2;

	pt2.x = pt1.x + dSizeX;
	pt2.y = pt1.y + dSubZ;
	
	pt3.x = pt2.x;
	pt3.y = pt2.y + m_dSizeZ;

	pt4.x = m_ptLocation.x;
	pt4.y = m_ptLocation.y + m_dSizeZ/2;
	
	pt1.z = pt2.z = pt3.z = pt4.z = 0;
}

void TDbRadiator::GetSysVertexs(XPoint &ptLeftLow, XPoint &ptRightLow,
								XPoint &ptRightUp, XPoint &ptLeftUp) const
{
	GetSysVertexs2d(ptLeftLow, ptRightLow, ptRightUp, ptLeftUp);
	double dAngle = CT_std_angle(m_dSysAngle);
	if (dAngle>PI/2 && dAngle<PI*3/2)
	{
		TchPrivate::Exchange(ptLeftLow, ptRightLow);
		TchPrivate::Exchange(ptRightUp, ptLeftUp);
	}
}

void TDbRadiator::GetRectVertexs(XPoint &ptLeftLow, XPoint &ptRightLow,
								 XPoint &ptRightUp, XPoint &ptLeftUp, BOOL b2d) const
{
	double dSizeX = fabs(m_dSizeX/2);
	double dSizeY = fabs(m_dSizeY/2);
	
	ptLeftLow.x  = m_ptLocation.x - dSizeX;
	ptLeftLow.y  = m_ptLocation.y - dSizeY;
	ptRightLow.x = m_ptLocation.x + dSizeX;
	ptRightLow.y = m_ptLocation.y - dSizeY;
	ptRightUp.x  = m_ptLocation.x + dSizeX;
	ptRightUp.y  = m_ptLocation.y + dSizeY;
	ptLeftUp.x   = m_ptLocation.x - dSizeX;
	ptLeftUp.y   = m_ptLocation.y + dSizeY;
	
	ads_matrix mat;
	m_ptLocation.GetRotationMatrix(m_dRotation, mat);
	ptLeftLow.TransformBy(mat);
	ptRightLow.TransformBy(mat);
	ptRightUp.TransformBy(mat);
	ptLeftUp.TransformBy(mat);
	
	if (b2d)
	{
		ptLeftLow.z = ptRightLow.z = ptRightUp.z = ptLeftUp.z = 0;
	}
	else
	{
		ptLeftLow.z = ptRightLow.z = ptRightUp.z = ptLeftUp.z = m_ptLocation.z;
	}
}

void TDbRadiator::GetOutline(XPoly2D &poly) const
{
	poly.Reset();
	poly.SetFlag(1);
	XPoint pt1, pt2, pt3, pt4;
	GetVertexs2d(pt1, pt2, pt3, pt4);
	poly.AppendNode(pt1);
	poly.AppendNode(pt2);
	poly.AppendNode(pt3);
	poly.AppendNode(pt4);
}


//////////////////////////////////////////////////////////////////////
// 有关绘制
//////////////////////////////////////////////////////////////////////
extern void DrawWeight(XExplodeDraw &dc, double dWeight, XPoly2D &poly,
					   int nColorIndex, double nScale);
// 绘制2D散热器实体
Acad::ErrorStatus TDbRadiator::DrawRadiator2d(XExplodeDraw &dc) const
{
	XAcGiViewDraw &viewDraw = (XAcGiViewDraw &)dc;
	XPoly2D poly;
	GetOutline(poly);
	if (!IsSysType())
	{
		double dWeight = GetPScale()*m_dWeight;
		DrawWeight(dc, dWeight, poly, colorIndex(), linetypeScale());
	}
	else
	{
		// change by zh 解决系统散热器不加粗的问题
		//dc << poly;
		double dWeight = GetPScale()*m_dWeight;
		DrawWeight(dc, dWeight, poly, colorIndex(), linetypeScale());
	}
	return Acad::eOk;
}

// 绘制2D阀门
Acad::ErrorStatus TDbRadiator::DrawValve2d(XExplodeDraw &dc) const
{
 	if (m_bHasValve && IsSysType())
	{
		XPoint ptLeftLow, ptRightLow, ptRightUp, ptLeftUp;
		// 散热器的系统图边框
		GetSysVertexs2d(ptLeftLow, ptRightLow, ptRightUp, ptLeftUp);

//		double dAngle = CT_std_angle(m_dSysAngle); // sg modify
		double dAngle(0);
		XPoint pt0, pt1, pt2;
		if (m_bIsReverse) // 相反
		{
			dAngle = CT_std_angle(m_dSysAngle - PI);
			pt0 = ptLeftLow;
		}
		else // 相同
		{
			dAngle = CT_std_angle(m_dSysAngle);
			pt0 = ptRightLow;
		}

		pt0.y += m_dSizeZ * 5/6;
		ads_polar(pt0, dAngle, m_dSizeZ/6, pt1);
		pt2 = pt1;
		pt2.y += m_dSizeZ * 2/6;

		dc  << XLine(pt0, pt1) << XLine(pt1, pt2); // 排气阀
	}
	return Acad::eOk;
}

// 绘制2D标注文字
Acad::ErrorStatus TDbRadiator::DrawLabelText(XExplodeDraw &dc) const
{
	AcDbObjectId idLayerOld = dc.GetLayerId();
	if (m_idLabelLayer.isValid())
	{
		dc.SetLayer(m_idLabelLayer);
	}
	
	TDbText text;
	text.setPropertiesFrom(this);
	text.setLayer(m_idLabelLayer);
	text.SetStyleId(m_idTextStyle);
	BOOL bUnit = GetUnit();
	if (m_iDrawMode == 1)
	{
// 	    text.SetText(XString(_T("%d"), m_iNum)); // 标注片数，片单位 modify yxx 2015 -5-29
		if ( !bUnit )
			text.SetText(XString(_T("%d"), m_iNum));
		else 
			text.SetText(XString(_T("%d 片"), m_iNum));
		
	}
    else if (m_iDrawMode == 2) // sg add
	{
        //text.SetText(XString(_T("%.1f"), m_dLoad)); // 标注负荷 modify yxx 2015 -5-29
		if ( !bUnit )
			text.SetText(XString(_T("%.1f"), m_dLoad));
		else
			text.SetText(XString(_T("%.1f W"), m_dLoad));
	}
	else if (m_iDrawMode == 3)
	{
		//text.SetText(XString(_T("%.1f"), m_dNum)); // 标注片数，m单位 modify yxx 2015 -5-29
		if ( !bUnit )
			text.SetText(XString(_T("%.1f"), m_dNum));
		else
			text.SetText(XString(_T("%.1f M"), m_dNum));
	}

	text.SetHeight(m_dTextHeight);
	double dAngle = GetAngle(); // sg add
	dAngle = CT_std_angle(dAngle);
	if ((dAngle > -1.0E-5) && (dAngle < PI/2 + 1.0E-5)) // [0, PI/2]
	{
		dAngle = dAngle;
	}
	else if ((dAngle > PI/2 + 1.0E-5) && (dAngle < PI*1.5 + 1.0E-5)) // (PI/2, 1.5*PI]
	{
		dAngle = dAngle + PI;
	}
	else if ((dAngle > PI*1.5 + 1.0E-5) && (dAngle < 2*PI - 1.0E-5)) // (1.5*PI, 2*PI)
	{
		dAngle = dAngle - PI*2;
	}
	text.SetAlignment(XExplodeDraw::kMiddleCenter);
	text.SetLocation(m_ptLabel);
	text.SetRotation(dAngle);
	dc.DrawEntity(text);
	dc.SetLayer(idLayerOld);

	return Acad::eOk;
}

// 2D绘制
Acad::ErrorStatus TDbRadiator::ExplodeOrDraw2d(XExplodeDraw &dc) const
{
	// cet 2016.10.17 add 图层关闭时，实体不显示，不进行绘制（打印时，也不会绘制）
	AcDbLayerTableRecordPointer player(this->layerId(), AcDb::kForRead);
	if (player.openStatus() == Acad::eOk && player->isOff())
	{
		return Acad::eOk;
	}
	Acad::ErrorStatus es = Acad::eOk;
	es = DrawRadiator2d(dc); // 散热器
	es = DrawValve2d(dc);    // 排气阀
	if (m_iDrawMode > 0) // 标注，支持模型图也标注
	{
		DrawLabelText(dc);
	}
	return es;
}

// 3D绘制
Acad::ErrorStatus TDbRadiator::ExplodeOrDraw3d(XExplodeDraw &dc) const
{
	Acad::ErrorStatus es = Acad::eOk;
	if (!IsSysType()) // 实体，平面图
	{
		if (fabs(m_dSizeX)>1.0E-3 || fabs(m_dSizeY)>1.0E-3)
		{ 
			TDbRect rect;
			AsRect(rect);
			es = rect.ExplodeOrDraw3d(dc);
		}
	}
	else // 系统图
	{
		return ExplodeOrDraw2d(dc);
	}
	return es;
}


//////////////////////////////////////////////////////////////////////
// 有关连接
//////////////////////////////////////////////////////////////////////
// 判断节点是否可以连接管段，nPos：0——start；1——end
BOOL TDbRadiator::CanLinkSide(const AcDbObjectId &idPipe, int nPos) const
{
	BOOL bRet = FALSE;
	OPENOBJ_BEGIN(idPipe, AcDb::kForRead, TDbPipe, pPipe);
	if (pPipe != NULL)
	{
		XPoint ptRef = nPos ? pPipe->EndPoint() : pPipe->StartPoint();
        if (IsSysType()) // 系统图
		{
            XPoly2D poly;
            GetOutline(poly);
            XPoint pt(ptRef.x, ptRef.y);
            if (poly.HitTestOnCurve(pt) != 0)
			{
                bRet = TRUE;
			}
        }
        else // 平面图
		{
            TDbRect rect;
            AsRect(rect);
            rect.SetElevation(0.0);
            XPoint pt(ptRef.x, ptRef.y);
            XPoint ptHit;
            if (rect.getClosestPointTo(pt, ptHit)==Acad::eOk &&
				pt.Distance2d(ptHit)<PS_SNAP)
			{
                bRet = TRUE;
			}

			if (bRet == FALSE) // 下接口情况
			{
				TDbRect newRect;
				AsRect(newRect);
				XPoint ptLeft, ptRight, ptHit;
				ads_polar(m_ptLocation, m_dRotation, -m_dSizeX/2, ptLeft);
				ads_polar(m_ptLocation, m_dRotation, m_dSizeX/2, ptRight);
				AcDbLine helpLine(ptLeft, ptRight);
				if (helpLine.getClosestPointTo(ptRef, ptHit, false) == Acad::eOk 
					&& ptRef.Distance(ptHit)<PS_SNAP)
				{
					bRet = TRUE;
				}
			}
        }
	}
	OPENOBJ_END();
	return bRet;
}

BOOL TDbRadiator::CanInLinkSide(const AcDbObjectId &idPipe) const
{
	BOOL bRet = FALSE;
	OPENOBJ_BEGIN(idPipe, AcDb::kForRead, TDbPipe, pPipe);
	if (pPipe != NULL)
	{
		if (CanInLinkSide(pPipe, 0))
		{
			bRet = TRUE;
		}
		else if (CanInLinkSide(pPipe, 1))
		{
			bRet = TRUE;
		}
	}
	OPENOBJ_END();
	return bRet;
}

BOOL TDbRadiator::CanOutLinkSide(const AcDbObjectId &idPipe) const
{
	BOOL bRet = FALSE;
	OPENOBJ_BEGIN(idPipe, AcDb::kForRead, TDbPipe, pPipe);
	if (pPipe != NULL)
	{
		if (CanOutLinkSide(pPipe, 0))
		{
			bRet = TRUE;
		}
		else if (CanOutLinkSide(pPipe, 1))
		{
			bRet = TRUE;
		}
	}
	OPENOBJ_END();
	return bRet;
}

// nPos: 0--start; 1--end
BOOL TDbRadiator::CanInLinkSide(const TDbPipe* pPipe, int nPos) const
{
	BOOL bRet = FALSE;
	const XPoint &ptRef = nPos==1 ? pPipe->EndPoint() : pPipe->StartPoint();
	double dDist = ptRef.Distance(GetInLocation());
	if (dDist < PS_SNAP) // 进口
	{
		bRet = TRUE;
	}
	return bRet;
}

// nPos: 0--start; 1--end
BOOL TDbRadiator::CanOutLinkSide(const TDbPipe* pPipe, int nPos) const
{
	BOOL bRet=FALSE;
	const XPoint &ptRef = nPos==1 ? pPipe->EndPoint() : pPipe->StartPoint();
	double dDist = ptRef.Distance(GetOutLocation());
	if (dDist < PS_SNAP) // 出口
	{
		bRet=TRUE;
	}
	return bRet;
}
 
//对st类型的接口进行重新连接
void TDbRadiator::UpdateLinkage(const XPoint &ptAt, TPipeSys::SysType st,
								const DList<AcDbObjectId> &idPipes)
{
	assertWriteEnabled();
	if (m_lstInterface.Length() != 2)
	{
		return;
	}

	TPipeInterface &inFace = *m_lstInterface.Head();
	TPipeInterface &outFace = *m_lstInterface.Tail();
	XPoint ptConnet;
	if (!CanInLinkSide(inFace.m_idPipe))
	{
		inFace.m_idPipe = AcDbObjectId::kNull;
		for (int i = 0; i < idPipes.Length(); i++)
		{
			const AcDbObjectId &id1 = idPipes[i];
			if (id1 == outFace.m_idPipe)
			{
				continue;
			}

			OPENOBJ_BEGIN(id1, AcDb::kForRead, TDbPipe, pPipe);
			if (pPipe != NULL)
			{
				if (ptAt.Distance(pPipe->StartPoint()) < ptAt.Distance(pPipe->EndPoint()))
				{
					ptConnet = pPipe->StartPoint();
				}
				else
				{
					ptConnet = pPipe->EndPoint();
				}

				if (ptConnet.Distance(InLocation())<ptConnet.Distance(OutLocation())
					|| HasOutPipe())
				{
					inFace.m_idPipe = id1;
					inFace.m_ptLocation = ptConnet;
				}
				else
				{
					outFace.m_idPipe = id1;
					outFace.m_ptLocation = ptConnet;
				}
			}
			OPENOBJ_END();
		}
	}

	if (!CanOutLinkSide(outFace.m_idPipe))
	{
		outFace.m_idPipe = AcDbObjectId::kNull;
		for (int i = 0; i < idPipes.Length(); i++)
		{
			const AcDbObjectId &id1 = idPipes[i];
			if (id1 == inFace.m_idPipe)
			{
				continue;
			}

			OPENOBJ_BEGIN(id1, AcDb::kForRead, TDbPipe, pPipe);
			if (pPipe != NULL)
			{
				if (ptAt.Distance(pPipe->StartPoint()) < ptAt.Distance(pPipe->EndPoint()))
				{
					ptConnet = pPipe->StartPoint();
				}
				else
				{
					ptConnet = pPipe->EndPoint();
				}

				if (ptConnet.Distance(InLocation())>ptConnet.Distance(OutLocation())
					|| HasInPipe())
				{
					outFace.m_idPipe = id1;
					outFace.m_ptLocation = ptConnet;
				}
				else
				{
					inFace.m_idPipe = id1;
					inFace.m_ptLocation = ptConnet;
				}
			}
			OPENOBJ_END();
		}
	}
}

void TDbRadiator::UpdateInterface()
{
	assertWriteEnabled();
	if (!IsSysType())
	{
		TDbRect rect;
		AsRect(rect);
		XPoint ptLowLeft = rect.GetLowLeft();
		XPoint ptUpRight = rect.GetUpRight();
		Midpoint(rect.GetLowLeft(), rect.GetUpLeft(), InLocation())
		Midpoint(rect.GetLowRight(), rect.GetUpRight(), OutLocation())
	}
	else
	{
		XPoint pt1, pt2, pt3, pt4;
		GetSysVertexs2d(pt1,pt2,pt3,pt4);
		double dAngle = CT_std_angle(m_dSysAngle) + PI/2;
		ads_polar(m_ptLocation, dAngle, 200, InLocation());
		ads_polar(m_ptLocation, -dAngle, 200, OutLocation());
	}
}

// nPos：0-start，1-end
// pt——与接口连接的点；vt——接口向量；pPipe——AcDb::kForWrite
void TDbRadiator::ChangePipe(TDbPipe *pPipe, const XPoint &pt) const
{
	if (pPipe == NULL)
	{
		return;
	}

	if (pPipe->isWriteEnabled() && pPipe->Is(CURVE_LINE))
	{
		int nFlag = pt&(*pPipe);
		BOOL bChangeOneSide	=  nFlag==PR_INSIDE || nFlag==PR_EXTEND || nFlag==PR_ONPT1 
			|| nFlag==PR_ONPT2;
		if (bChangeOneSide)
		{
			pPipe->assertWriteEnabled();
			double nAng = ads_angle(pPipe->GetStartPoint(), pPipe->GetEndPoint());
			if (pPipe->GetNode(1) == objectId())
			{
				double nAng2 = ads_angle(pPipe->GetStartPoint(), pt);
				if (fabs(nAng - nAng2) < 0.01)
				{
					pPipe->EndPoint() = pt;
				}
			}
			else if (pPipe->GetNode(0) == objectId())
			{
				double nAng2 = ads_angle(pt, pPipe->EndPoint());
				if (fabs(nAng - nAng2) < 0.01)
				{
					pPipe->StartPoint() = pt;
				}
			}
		} 
	}
}

// 将散热器的变化应用到连接的管线
void TDbRadiator::ApplyChangeToPipe() const
{
	TPipeInterface &inFace = *m_lstInterface.Head();
	TPipeInterface &outFace = *m_lstInterface.Tail();
	OPENOBJ_BEGIN(GetInPipe(), AcDb::kForWrite, TDbPipe, pPipe);
	if (pPipe != NULL)
	{
		ChangePipe(pPipe, GetInLocation());
	}
	OPENOBJ_END();

	OPENOBJ_BEGIN(GetOutPipe(), AcDb::kForWrite, TDbPipe, pPipe);
	if (pPipe != NULL)
	{
		ChangePipe(pPipe, GetOutLocation());
	}
	OPENOBJ_END();
	inFace.m_idPipe = AcDbObjectId::kNull;
	outFace.m_idPipe = AcDbObjectId::kNull;
}

// 导出XML
CString TDbRadiator::GetXml(const AcGeMatrix3d& mat) const
{
	if (1 == m_nType)	// 系统图不导出
		return CString();

	int nPtPreci = 6; // 位置精度
	int nWhPreci = 0; // 宽度、高度精度

	TXmlTree xmlTree;
	CString csText;
	POSITION posRoot = xmlTree.Insert(_T("ATS_RADIATOR"), NULL, NULL);
	{
		xmlTree.SetAttribute(posRoot, _T("name"), _T("散热器"));
		xmlTree.SetAttribute(posRoot, _T("comment"), _T("上华对象名称"));
	}

	POSITION posItemDrawType = xmlTree.Insert(_T("DrawType"), posRoot, NULL);
	{ 
		xmlTree.SetAttribute(posItemDrawType, _T("name"), _T("绘制类型"));
		xmlTree.SetAttribute(posItemDrawType, _T("comment"), _T("0:模型图,1:系统图"));
		csText.Format(_T("%d"), m_nType);
		xmlTree.SetItemText(posItemDrawType, csText);
	}

	POSITION posItemLoc = xmlTree.Insert(_T("Location"), posRoot, posItemDrawType);
	{ 
		xmlTree.SetAttribute(posItemLoc, _T("name"), _T("位置"));
		xmlTree.SetAttribute(posItemLoc, _T("comment"), _T("基准点为底面中心点"));
		AcGePoint3d ptLoc = m_ptLocation;
		ptLoc.transformBy(mat);
		csText.Format(_T("%s,%s,%s"), DoubleToString(ptLoc.x, nPtPreci),
			DoubleToString(ptLoc.y, nPtPreci), DoubleToString(ptLoc.z, nPtPreci));
		xmlTree.SetItemText(posItemLoc, csText);
	}

	POSITION posItemRotation = xmlTree.Insert(_T("Rotation"), posRoot, posItemLoc);
	{ 
		xmlTree.SetAttribute(posItemRotation, _T("name"), _T("角度"));
		xmlTree.SetAttribute(posItemRotation, _T("comment"), _T("布置时旋转的角度(角度制)"));
		csText = DoubleToString(m_dRotation * 180.0 / PI, 2);
		xmlTree.SetItemText(posItemRotation, csText);
	}

	POSITION posItemLength = xmlTree.Insert(_T("Length"), posRoot, posItemRotation);
	{
		xmlTree.SetAttribute(posItemLength, _T("name"), _T("长度"));
		xmlTree.SetAttribute(posItemLength, _T("comment"), _T("散热器的长度"));
		csText = DoubleToString(m_dSizeX, nWhPreci);
		xmlTree.SetItemText(posItemLength, csText);
	}

	POSITION posItemWidth = xmlTree.Insert(_T("Width"), posRoot, posItemLength);
	{ 
		xmlTree.SetAttribute(posItemWidth, _T("name"), _T("宽度"));
		xmlTree.SetAttribute(posItemWidth, _T("comment"), _T("散热器的宽度"));
		csText = DoubleToString(m_dSizeY, nWhPreci);
		xmlTree.SetItemText(posItemWidth, csText);
	}

	POSITION posItemHeight = xmlTree.Insert(_T("Height"), posRoot, posItemLength);
	{ 
		xmlTree.SetAttribute(posItemHeight, _T("name"), _T("高度"));
		xmlTree.SetAttribute(posItemHeight, _T("comment"), _T("散热器的高度"));
		csText = DoubleToString(m_dSizeZ, nWhPreci);
		xmlTree.SetItemText(posItemHeight, csText);
	}

	POSITION posItemFactory = xmlTree.Insert(_T("Factory"), posRoot, posItemHeight);
	{ 
		xmlTree.SetAttribute(posItemFactory, _T("name"), _T("厂家"));
		xmlTree.SetAttribute(posItemFactory, _T("comment"), _T("厂家"));
		xmlTree.SetItemText(posItemFactory, m_sFactory);
	}

	POSITION posItemModel = xmlTree.Insert(_T("Model"), posRoot, posItemFactory);
	{ 
		xmlTree.SetAttribute(posItemModel, _T("name"), _T("型号"));
		xmlTree.SetAttribute(posItemModel, _T("comment"), _T("型号"));
		xmlTree.SetItemText(posItemModel, m_sType);
	}

	POSITION posObjId = xmlTree.Insert(_T("Object_ID"), posRoot, posItemModel);
	{
		xmlTree.SetAttribute(posObjId, _T("name"),_T("ID"));
		xmlTree.SetAttribute(posObjId, _T("comment"),_T("散热器ID"));

		csText.Format(_T("%ld"), 0x7FFFFFFF & objectId().asOldId());
		xmlTree.SetItemText(posObjId, csText);
	}

	CString csXml = xmlTree.GetXml();
	CString csBase = TEntityBase::GetXml(mat); 
	int nIndex = csXml.Find(_T("</TCH_"));
	if (nIndex > -1)
		csXml.Insert(nIndex, csBase);

	return csXml;
}

bool TDbRadiator::GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir,
							 std::vector<TObjSectionRecord> &sectionRecord, AcDbVoidPtrArray& arFillPtrs) const
{
	TGGeSectionPlane section_pln(face, vtPlaneSecDir); // 构造一个辅助剖面

	AcDbVoidPtrArray arFaces;
	XExplodeStream dc(arFaces);
	ExplodeOrDraw3d(dc);	

	double dElevation(0.0);
	AcDbEntity* pEnt = NULL;
	AcDbFace* pFace = NULL;
	int i(0);
	for (i = 0; i < arFaces.length(); ++i)
	{
		pEnt = (AcDbEntity*)arFaces[i];
		if (NULL == pEnt)
			continue;
		
		pFace = AcDbFace::cast(pEnt);
		if (pFace)
		{
			TGGeSectionPlane pln(*pFace, vtPlaneSecDir);
			TGGePoly2D poly;
			dElevation = SectionUtility::Projection_plane2plane(section_pln, pln, poly);
			sectionRecord.push_back(TObjSectionRecord(objectId(), layerId(), TObjSectionRecord::eTCH_RADIATOR, dElevation, poly));			
		}
		
		delete pEnt;
	}

	return true;
}

Acad::ErrorStatus TDbRadiator::GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const
{
	// mcl add 2011.4.7. 解决自由复制、自由移动时 消失（跑远）问题
	XPoly2D poly;
	GetOutline(poly);

	if (RTNORM == poly.GetExtend(ptLow, ptUp))
		return Acad::eOk;
	
	return Acad::eNotImplementedYet;
}

//////////////////////////////////////////////////////////////////////
// 有关标注
//////////////////////////////////////////////////////////////////////
// 设置标注方式
void TDbRadiator::SetDrawMode(int iMode)
{
	assertWriteEnabled();
	m_iDrawMode = iMode;
	if (m_iDrawMode > 0 && !m_ptLabel)
	{
		XPoint pt1, pt2, pt3, pt4;
		GetSysVertexs2d(pt1, pt2, pt3, pt4);
		Midpoint(pt1, pt3, m_ptLabel);

		if (!IsSysType()) // 默认标在散热器上面
		{
			m_ptLabel.y += m_dSizeY/2 + m_dTextHeight*DocGetPScale();
		}
	}
}

BOOL TDbRadiator::GetUnit() const
{
	assertReadEnabled();
	BOOL bUnit;
	const TEntityFields &fd = GetFields();
	if( !fd.GFD(SHOW_UNIT, bUnit) )
	{
		bUnit = FALSE;
	}
	return bUnit;
}

void TDbRadiator::SetUnit(BOOL bUnit)
{
	assertWriteEnabled();
	TEntityFields &fd = Fields();
	fd.SFD(SHOW_UNIT, bUnit);
}

// 在位编辑
double StringAnalysis(const CString &src, const Adesk::UInt8 &nType);
void TDbRadiator::SetSubText(long i, CString sText) // sg add
{
	assertWriteEnabled();
	double dRet = ::StringAnalysis(sText, m_iDrawMode);
	if (dRet < 0)
	{
		return;
	}

	if (m_iDrawMode == 3) // 散热器片数（M）
	{
		SetMNum(dRet);
	}
	else if (m_iDrawMode == 2) // 负荷
	{
		SetLoad(dRet);
	}
	else if (m_iDrawMode == 1) // 散热器片数（片）
	{
		SetNum((int)dRet);
	}
}


//////////////////////////////////////////////////////////////////////////
void InitDbRadiator(BOOL bTrue)
{
    if (bTrue)
	{
        TDbRadiator::rxInit();
		TDbRadiator::InitMatchProtocol(TRUE);
    }
	else
	{
		TDbRadiator::InitMatchProtocol(FALSE);
		deleteAcRxClass(TDbRadiator::desc());
    }
}


//////////////////////////////////////////////////////////////////////////
// 用于分析系统散热器的标注。sg add
// Adesk::UInt8 nType; // 1：标注片数（片）；2：标注负荷；3：标注片数（m）
double StringAnalysis(const CString &src, const Adesk::UInt8 &nType)
{
	double dRet = -1.0;
	BOOL bFlag(TRUE);
	int nLen = src.GetLength();
	for (int i = 0; i < nLen; i++)
	{
		if (_istdigit(src[i]))
		{
			continue;
		}
		else if (src[i] == _T('.'))
		{
			if ((nType == 2) || (nType == 3))
			{
				continue;
			}
			else if (nType == 1)
			{
				dRet = _tstof(src.Left(i));
				dRet++;
				bFlag = FALSE;
				break;
			}
		}
		else
		{
			bFlag = FALSE;
			ads_alert(_T("请输入数字！"));
			break;
		}
	}

	if (bFlag)
	{
		dRet = _tstof(src);
	}
	return dRet;
}