#include "stdafx.h"
#include "YXKKDlg.h"
#include "AecDbEarthWorm.h"
#include "AecDbShEarthWorm.h"
#include "KTCADUtilityEx.h"
#include "AcDbX3dSolid.h"
#include "AecDbX3dGroup.h"
#include "axlock.h"
#include "CCSYDlg.h"
#include "UITools.h"
#include "AecDbEarthWormFitting.h"
#include "AecDb3dRoadAxisLine.h"
#include "coretools.h"

extern Acad::ErrorStatus AddToModelSpace(AcDbEntity* pEnt,AcDbDatabase* pDb ,bool bClose );
extern void SplitStrintToArray(LPCTSTR pszDescr,CStringArray& arInfo,TCHAR tcSpace);
extern CString IDCreate();

static void FreeBuffer(AcDbVoidPtrArray& arTextPtrs)
{
	AcDbEntity* pEnt = NULL;
	while (arTextPtrs.length() > 0)
	{
		pEnt = (AcDbEntity*)arTextPtrs.first();
		arTextPtrs.removeFirst();
		DELETE_PTR(pEnt);
	}
}

IMPLEMENT_DYNAMIC(CYXKKDlg, CDialog)

CYXKKDlg::CYXKKDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CYXKKDlg::IDD, pParent)
	, m_dL1(5.0)
	, m_dL2(3.0)
	, m_dL3(0.5)
	, m_nShape(0)
	, m_nPos(2)
	, m_bAllEw(FALSE)
	, m_idxRoom(-1)
	, m_dW1(2)
	, m_nH(1)
	, m_nV(1)
	, m_dHSpace(0.5)
	, m_dVSpace(0.5)
	, m_bSpecThick(FALSE)
	, m_dSpecThick(0.4)
	, m_bAddHoleCase(TRUE)
	, m_sMaterial(_T("PVC套管"))
	, m_bAddHoop(FALSE)
	, m_dX(5.1)
	, m_dY(5.1)
	, m_dZ(0.1)
	, m_dt(0.1)
	, m_dHoleH(0.4)
{
	m_pRectCell = new AcDbPolyline;
	m_pRectCell->addVertexAt(0, AcGePoint2d::kOrigin);
	m_pRectCell->addVertexAt(1, AcGePoint2d(1, 0));
	m_pRectCell->addVertexAt(1, AcGePoint2d(1, 1));
	m_pRectCell->addVertexAt(1, AcGePoint2d(0, 1));
	m_pRectCell->setColorIndex(6);
	m_pRectCell->setClosed(Adesk::kTrue);
	m_pRectCell->setConstantWidth(0.1);

	UIDataCache::Read(_T("%d%d%d%i%i%i%d%i%s%i%i%d%d%i%d%i"), _T("CYXKKDlg")
		, &m_dL1 , &m_dL2 , &m_dL3
		, &m_nShape , &m_nPos , &m_bAllEw
		, &m_dW1
		, &m_idxRoom
		, &m_sCrossSectionScr
		, &m_nH
		, &m_nV
		, &m_dHSpace
		, &m_dVSpace
		, &m_bSpecThick
		, &m_dSpecThick
		, &m_bAddHoleCase
	);
	m_sPoints = _T("");
	m_sPointsIn = _T("");

	m_dX = m_dL1 + 0.1;
	m_dY = m_dL2 + 0.1;

	m_curSection.pReg = NULL;
	m_curSection.pt.set(0,0,0);
	m_sCrossSectionScr = _T("");
	m_sAddtionScr = _T("");
	m_idxRoom = 0;
	m_pRegionRoom = NULL;
}

CYXKKDlg::~CYXKKDlg()
{
}

void CYXKKDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Text(pDX, IDC_EDIT1, m_dL1);
	DDX_Text(pDX, IDC_EDIT34, m_dL2);
	DDX_Text(pDX, IDC_EDIT35, m_dL3);
	DDX_Radio(pDX, IDC_RADIO1, m_nShape);
	DDX_Radio(pDX, IDC_RADIO2, m_nPos);
	DDX_Check(pDX, IDC_CHECK1, m_bAllEw);
	DDX_Text(pDX, IDC_EDIT3, m_dW1);
	DDX_Text(pDX, IDC_EDIT8, m_nH);
	DDX_Text(pDX, IDC_EDIT9, m_nV);
	DDX_Text(pDX, IDC_EDIT19, m_dHSpace);
	DDX_Text(pDX, IDC_EDIT20, m_dVSpace);
	DDX_Check(pDX, IDC_CHECK2, m_bSpecThick);
	DDX_Text(pDX, IDC_EDIT2, m_dSpecThick);
	DDX_Check(pDX, IDC_CHECK3, m_bAddHoleCase);
	DDX_Text(pDX, IDC_EDIT10, m_sMaterial);
	DDX_Check(pDX, IDC_CHECK4, m_bAddHoop);
	DDX_Text(pDX, IDC_EDIT21, m_dX);
	DDX_Text(pDX, IDC_EDIT22, m_dY);
	DDX_Text(pDX, IDC_EDIT23, m_dZ);
	DDX_Text(pDX, IDC_EDIT25, m_dt);
	DDX_Text(pDX, IDC_EDIT4, m_dHoleH);
}


BEGIN_MESSAGE_MAP(CYXKKDlg, CDialog)
	ON_BN_CLICKED(IDC_RADIO1, &CYXKKDlg::OnBnClickedRadio1)
	ON_BN_CLICKED(IDC_RADIO13, &CYXKKDlg::OnBnClickedRadio13)
	ON_BN_CLICKED(IDOK, &CYXKKDlg::OnBnClickedOk)
	ON_MESSAGE(WM_VIEW_LBUTTONDOWN, &CYXKKDlg::OnViewLButtonDown)
	ON_BN_CLICKED(IDC_BUTTON1, &CYXKKDlg::OnBnClickedButton1)
	ON_BN_CLICKED(IDC_BUTTON2, &CYXKKDlg::OnBnClickedButton2)
	ON_BN_CLICKED(IDC_BUTTON3, &CYXKKDlg::OnBnClickedButton3)
	ON_BN_CLICKED(IDC_BUTTON4, &CYXKKDlg::OnBnClickedButton4)
END_MESSAGE_MAP()

BOOL CYXKKDlg::OnInitDialog()
{
	CDialog::OnInitDialog();

	// 子类化控件对象
	if (!m_wndViewCtrl.SubclassDlgItem(IDC_STATIC_EW, this))
	{
		// 错误时，结束对话框
		EndDialog(IDCANCEL);
		return FALSE;
	}

	ShowEarthWorm();

	if (m_idxRoom > -1)
	{
		HitEarthWorm(m_idxRoom);
	}

	UpdateData(FALSE);

	return TRUE;
}

void CYXKKDlg::HitEarthWorm(int idxRoom)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		HitShEarthWorm(idxRoom);
		return;
	}

	//判断 点落在 room 内
	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	AcGeLineSeg3d ln;
	AcGePoint3d pt2(1000.0, 0, 0);
	ln.set(AcGePoint3d::kOrigin, pt2);

	AcGePoint3d ptGe[4];
	AcDbVoidPtrArray arRegPtrs;
	int nRooms = worm.CreateSectionRoomRegion(ln, eType, arDatas, arRegPtrs);
	if (nRooms > 0)
	{
		if (idxRoom > -1 && idxRoom < arRegPtrs.length() )
		{
			AcDbRegion* pReg = (AcDbRegion*)arRegPtrs.at(idxRoom);
			if (pReg != NULL)
			{
				AcDbExtents ext;
				pReg->getGeomExtents(ext);

				ptGe[0] = ext.minPoint();
				ptGe[1] = ptGe[0];
				ptGe[1].x = ext.maxPoint().x;
				ptGe[2] = ext.maxPoint();
				ptGe[3] = ptGe[0];
				ptGe[3].y = ext.maxPoint().y;

				AcGsView* pView = m_wndViewCtrl.view();
				AcGsModel* pModel = m_wndViewCtrl.model();
				if (pView != NULL)
				{
					if (m_pRectCell != NULL)
						pView->erase(m_pRectCell);
				}

				if (m_pRectCell != NULL)
				{
					for (int i = 0; i < 4; i++)
					{
						m_pRectCell->setPointAt(i, ptGe[i].convert2d(AcGePlane::kXYPlane));
					}
				}

				if (pView != NULL)
				{
					pView->add(m_pRectCell, pModel);
				}
			}
		}

		FreeBuffer(arRegPtrs);

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();

		UpdateData(FALSE);
	}
}

void CYXKKDlg::ShowEarthWorm()
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		ShowShEarthWorm();
		return;
	}

	m_wndViewCtrl.clearAll();
	m_wndViewCtrl.init(true);
	m_wndViewCtrl.SetOrbitFlag(OBF_PAN | OBF_ZOOM | OBF_COTE);

	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0f);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	//外壁厚,内隔壁厚
	if (arDatas.length() > 0)
	{
		m_dHoleH = arDatas.last().x;
	}

	AcGeLineSeg3d ln;
	AcGePoint3d pt2(1000.0,0,0);
	ln.set(AcGePoint3d::kOrigin,pt2);

	AcDbRegion* pEWRegion = worm.CreateSectionRegion(ln,eType,arDatas);
	if (pEWRegion != NULL)
	{
		AcDbExtents exts;
		pEWRegion->getGeomExtents(exts);

		AcGeMatrix3d xform;
		xform.setToScaling(0.95);
		pEWRegion->transformBy(xform);

		m_wndViewCtrl.InitFromCurrentView2D(exts,true);

		AcDbVoidPtrArray arr;
		int rooms = worm.CreateSectionRoomRegion(ln, eType, arDatas, arr);

		AcDbEntity* pEnt = NULL;
		AcDbVoidPtrArray arr2;
		worm.CreateSectionRoomAddition(ln,eType,arr2);
		for (int i = 0; i < arr2.length(); i++)
		{
			pEnt = (AcDbEntity*)arr2.at(i);
			m_wndViewCtrl.Add(pEnt);
		}

		m_wndViewCtrl.Add(pEWRegion);
		m_wndViewCtrl.view()->invalidate();

		m_wndViewCtrl.Invalidate();
		m_wndViewCtrl.RedrawWindow();
	}
}

void CYXKKDlg::ShowShEarthWorm()
{
	//1.截面
	CString sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.sat");

	AcDbVoidPtrArray arBodyPtrs;
	if ( Acad::eOk == AcDbBody::acisIn(sFullPath,arBodyPtrs) )
	{
		if (arBodyPtrs.length() > 0)
		{
			AcDbEntity* pEnt = (AcDbEntity*)arBodyPtrs.first();
			AcDbRegion* pRegion = AcDbRegion::cast(pEnt);
			if (pRegion != NULL)
			{
				m_curSection.pReg = pRegion;
			}

			if (m_curSection.pReg != NULL)
			{
				ExtractRegionRooms();
				ShowEwSection();
			}
		}
	}

	//2.壁厚
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.ext");

	CString sLine;
	CStdioFile file;
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		file.ReadString(sLine);
		file.Close();

		sLine.TrimRight(_T('\n'));
		CStringArray arInf;
		SplitStrintToArray(sLine,arInf,_T(','));

		if (arInf.GetSize() >= 6)
		{
			m_curSection.pt.set(_ttof(arInf.GetAt(0)),_ttof(arInf.GetAt(1)),0.0);
			m_curSection.dThick[0] = _ttof(arInf.GetAt(2));
			m_curSection.dThick[1] = _ttof(arInf.GetAt(3));
			m_curSection.dThick[2] = _ttof(arInf.GetAt(4));
			m_curSection.dThick[3] = _ttof(arInf.GetAt(5));

			m_dHoleH = AS_MUNIT(m_curSection.dThick[0]);
		}
	}

	//3.名称
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.nam");

	CString sIndex,sName;
	AcDbText* pText = NULL;
	AcGePoint3d ptIns;

	CStringArray arInf;
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		sLine = _T("");
		while(file.ReadString(sLine))
		{
			sLine.TrimRight(_T('\n'));
			arInf.RemoveAll();
			SplitStrintToArray(sLine,arInf,_T(','));

			if (arInf.GetSize() >= 4)
			{
				sIndex = arInf.GetAt(0);
				sName = arInf.GetAt(1);
				m_mapIndexToName.SetAt(sIndex,sName);
			}
		}
		file.Close();
	}

	ExtractRegionRooms();

	//4.显示附件
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.adt");
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		sLine = _T("");
		file.ReadString(sLine);
		sLine.TrimRight(_T('\n'));

		m_sAddtionScr = sLine;

		m_mapAddtion.RemoveAll();
		ExtrAddtionToMap();

		file.Close();
	}
	ShowAddtion();
	ShowRoomName();

	UpdateData(FALSE);
	UpdateWindow();
}

void CYXKKDlg::ExtrAddtionToMap( )
{
	m_mapAddtion.RemoveAll();
	int nPos = m_sAddtionScr.Find(_T("EXT:"));
	if (nPos != -1)
	{
		//EXT:
		if (nPos + 4 < m_sAddtionScr.GetLength() )
		{
			CString sName;
			CString sExt = m_sAddtionScr.Mid(nPos + 4);
			//<><><><><><>.....
			CString sScript,sScriptT,sScript2,sScriptNewVer;
			CString sKey,sOld;

			int nSta = 0,nPos2 = 0,nRoomIndex = 0,nLRPos = 0,nNo = 1;
			nPos = sExt.Find(_T('<'),nSta);
			while(nPos != -1)
			{
				nPos2 = sExt.Find(_T('>'),nPos + 1);
				if (nPos2 == -1)
					break;

				//..<***>...
				sScript = sExt.Mid(nPos + 1,nPos2 - nPos - 1);

				if (sScript.Find( EW_HOLDER ) != -1)
				{
					//HOLDER:房间|左右位置|层数|垂直间隙|水平间隙|距顶D|长度|宽度|厚度|材料|用途|偏移=(,,,)|编号
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_HOLDER);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 12)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						nLRPos = _ttoi(arInf.GetAt(1));

						if (arInf.GetSize() > 12)
						{
							nNo = _ttoi(arInf.GetAt(12));
						}
						else//旧版本
						{
							static int nNum = 1;
							nNo = nNum++;

							sOld.Format(_T("|%d"),nNo);
							sScriptNewVer =sScript + sOld;
							m_sAddtionScr.Replace(sScript,sScriptNewVer);
							sScript = sScriptNewVer;
						}

						sKey.Format(_T("%d-%d-%d-HOLDER"),nRoomIndex,nLRPos,nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_BOSS) != -1)
				{
					//<BOSS:房间|左右位置|侧间隙|水平间隙|宽|高|长|直径|用途>
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_BOSS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 9)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						if (arInf.GetSize() > 16)
							nLRPos = _ttoi(arInf.GetAt(16));

						sKey.Format(_T("%d-%d-BOSS"),nRoomIndex,nLRPos);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find( EW_HANGER ) != -1)
				{
					//HANGER:房间|层数|垂直间隙|水平间隙|左侧距离|距顶D|长度|宽度|厚度|材料|用途|偏移(,,,)
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_HANGER);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-HANGER"),nRoomIndex,0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_RINGS) != -1)
				{
					//RINGS:房间|半径|长度|位置|材料|用途
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_RINGS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 9)
					{
						nNo = _ttoi(arInf.GetAt(8));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 7)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-RINGS"),nRoomIndex,0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_LAMPS) != -1)
				{
					//LAMPS:房间|长度|宽度|厚度|左侧定位|纵向间距|瓦数|名称|型好|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_LAMPS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 12)
					{
						nNo = _ttoi(arInf.GetAt(11));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-LAMPS"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_FIREET) != -1)
				{

					//FIREET:房间|安装方式|安装位置|X直径L|Y直径H|上间隙TSP|下间隙DSP|填充量|工作温度|性能|型号|名称|类别|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_FIREET);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 16)
					{
						nNo = _ttoi(arInf.GetAt(15));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 13)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nSetup = _ttoi(arInf.GetAt(1));
						int nHSetup = _ttoi(arInf.GetAt(2));

						CString sTemp;
						sTemp.Format(_T("1%d%d"),nSetup,nHSetup);

						sKey.Format(_T("%d-%s-%d-FIREET"), nRoomIndex, sTemp, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_GUTTERWAY) != -1)
				{
					sKey.Format(_T("%d-%d-GUTTERWAY"), 0, 0);

					sScript2.Format(_T("<%s>"),sScript);
					m_mapAddtion.SetAt(sKey,sScript);
				}
				else if (sScript.Find(EW_FIREDOOR) != -1)
				{
					//FIREDOOR:房间|宽|高|位置|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_FIREDOOR);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 8)
					{
						nNo = _ttoi(arInf.GetAt(7));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 5)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-FIREDOOR"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_SECURITY) != -1)
				{
					//SECURITY:房间|大径|小径|高度|定位|间距|名称|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_SECURITY);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 11)
					{
						nNo = _ttoi(arInf.GetAt(10));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 9)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-SECURITY"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_DRAFAN) != -1)
				{
					//DRAFAN:房间|外径|长度|吊高|间距|风量|功率|机号|名称|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_DRAFAN);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-DRAFAN"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_GASALARM) != -1)
				{
					//GASALARM:房间|位置|高度|长|宽|厚|间距|名称|等级|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_GASALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						nLRPos = _ttoi(arInf.GetAt(1));

						sKey.Format(_T("%d-%d-%d-GASALARM"), nRoomIndex, nLRPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if(sScript.Find(EW_ROOMSLAB) != -1)
				{
					//ROOMSLAB: 房间|位置方向|距离|子舱宽|板厚度|偏移x|偏移y|编号
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_ROOMSLAB);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 8)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						CString sNo = arInf.GetAt(7);

						sKey.Format(_T("%d-%s-ROOMSLAB"), nRoomIndex, sNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_SMOKALARM) != -1)
				{
					//SMOKALARM:房间|位置|间距|外径|高度|名称|编号|规格|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_SMOKALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 11)
					{
						nNo = _ttoi(arInf.GetAt(10));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-SMOKALARM"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_TEMPALARM) != -1)
				{
					//TEMPALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|编号|规格|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_TEMPALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));

						sKey.Format(_T("%d-%d-%d-TEMPALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_COALARM) != -1)
				{
					//COALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|浓度|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_COALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 12)
					{
						nNo = _ttoi(arInf.GetAt(11));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));
						sKey.Format(_T("%d-%d-%d-COALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_OXALARM) != -1)
				{
					//OXALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|采样方式|测量精度|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_OXALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));
						sKey.Format(_T("%d-%d-%d-OXALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_ROOMNAME) != -1)
				{
					//ROOMNAME:房间|中心x|中心y|名称  -->x,y放大100倍
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_ROOMNAME);
					sScriptT.TrimLeft(_T(':'));

					//判断是否分舱
					//double dCenX = (pt[0].x + pt[2].x) / 2.0;
					//double dCenY = (pt[0].y + pt[2].y) / 2.0;
					//CString sKey,sVal;
					//sKey.Format(_T("%d|%d|%d|ROOMNAME"), nRoomIndex, (int)( 100.0 * dCenX ),(int)(100.0 * dCenY) );//放大100倍
					//sVal.Format(_T("<ROOMNAME:%d|%d|%d|%s>"),nRoomIndex,(int)( 100.0 * dCenX ),(int)(100.0 * dCenY),m_sRoomName);
					//m_mapAddtion.SetAt(sKey,sVal);

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 4)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nCenX = _ttoi(arInf.GetAt(1));
						int nCenY = _ttoi(arInf.GetAt(2));
						sName = arInf.GetAt(3);

						sKey.Format(_T("%d|%d|%d|ROOMNAME"),nRoomIndex,nCenX,nCenY);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
						m_mapIndexToName.SetAt(arInf.GetAt(0),sName);
					}
				}
				else if (sScript.Find(EW_CHARMNO) != -1)
				{
					//盾构没有倒角
				}

				nSta += sScript.GetLength();
				nPos = sExt.Find(_T('<'),nSta);
			}
		}
	}
}

void CYXKKDlg::ShowEwSection()
{
	if (m_curSection.pReg != NULL)
	{
		m_arDrawBuffer.removeAll();
		m_wndViewCtrl.clearAll();
		m_wndViewCtrl.init(true);
		m_wndViewCtrl.SetOrbitFlag(OBF_PAN | OBF_ZOOM | OBF_COTE);

		AcDbExtents exts;
		m_curSection.pReg->getGeomExtents(exts);
		m_wndViewCtrl.InitFromCurrentView2D(exts,true);

		m_wndViewCtrl.Add(m_curSection.pReg);
		m_arDrawBuffer.append(m_curSection.pReg);

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.Invalidate();
		m_wndViewCtrl.RedrawWindow();
	}	
}

void CYXKKDlg::FormatAddtionScr()
{
	m_sAddtionScr = _T("");
	CString sExt = _T("EXT:"),sKey,sExtVal;
	for (POSITION ps = m_mapAddtion.GetStartPosition();ps != NULL;)
	{
		m_mapAddtion.GetNextAssoc(ps,sKey,sExtVal);
		sExt += sExtVal;
	}
	if (sExt.CompareNoCase(_T("EXT:")) != 0)
	{
		m_sAddtionScr += sExt;
	}
}

void CYXKKDlg::ShowAddtion()
{
	//合成脚本
	FormatAddtionScr();

	if (!m_sAddtionScr.IsEmpty())
	{
		AecDbShEarthWorm shWorm;

		AcGePoint3d ptEnd(100,0,0);
		AcDbLine ln(AcGePoint3d(0,0,0),ptEnd);

		AecDb3dRoadAxisLine* pRoadLn = new AecDb3dRoadAxisLine;
		pRoadLn->AppendCurveSeg(&ln);

		shWorm.GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
		shWorm.SetSection(m_curSection.pReg,m_curSection.pt);
		shWorm.SetBaseCurve(pRoadLn);
		shWorm.SetAddtionScr(m_sAddtionScr);

		AcDbVoidPtrArray arCurPtrs;
		shWorm.GetAddtionSection(arCurPtrs);

		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < arCurPtrs.length();i++)
		{
			pEnt = (AcDbEntity*)arCurPtrs.at(i);
			pView->add(pEnt, pModel);
			m_arDrawBuffer.append(pEnt);
		}

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();	
	}
}


void CYXKKDlg::ShowRoomName()
{
	CString sKey,sName;
	AcDbRegion* pRegion = NULL;
	AcDbText* pText = NULL;

	//延着整体圆排序
	double             perimeter;
	double             area;
	AcGePoint2d        centroid;
	double             momInertia[2];
	double             prodInertia;
	double             prinMoments[2];
	AcGeVector2d       prinAxes[2];
	double             radiiGyration[2];
	AcGePoint2d        extentsLow;
	AcGePoint2d        extentsHigh;

	AcGePoint3d ptIns;
	for (int i = 0;i < m_arRegionRooms.length();i++)
	{
		pRegion = (AcDbRegion*)m_arRegionRooms.at(i);

		pRegion->getAreaProp(AcGePoint3d::kOrigin,AcGeVector3d::kXAxis,AcGeVector3d::kYAxis,
			perimeter,
			area,
			centroid,
			momInertia,
			prodInertia,
			prinMoments,
			prinAxes,
			radiiGyration,
			extentsLow,
			extentsHigh);

		sKey.Format(_T("%d"),i);
		ptIns.set(centroid.x,centroid.y,0.0);

		if (m_mapIndexToName.Lookup(sKey,sName))
		{
			pText = NULL;
			if (m_mapIndexToDbText.Lookup(sKey,(void*&)pText))
			{
				pText->setPosition(ptIns);
				pText->setTextString(sName);
			}
			else
			{
				ptIns.set(centroid.x,centroid.y,0.0);
				pText = new AcDbText(ptIns,sName,acdbCurDwg()->textstyle(),0.15,0.0);
				pText->setHeight(.15);
				pText->setColorIndex(1);
				pText->setTextStyle(acdbCurDwg()->textstyle());
				pText->setHorizontalMode(AcDb::kTextLeft);
				m_mapIndexToDbText.SetAt(sKey,pText);
			}

			if (pText != NULL)
			{
				m_wndViewCtrl.view()->erase(pText);
				m_wndViewCtrl.Add(pText);

				if (m_arDrawBuffer.find(pText) == -1)
					m_arDrawBuffer.append(pText);
			}
		}
	}
	m_wndViewCtrl.view()->invalidate();
	m_wndViewCtrl.Invalidate();
	m_wndViewCtrl.RedrawWindow();
}

void CYXKKDlg::ExtractRegionRooms()
{
	if (m_curSection.pReg != NULL)
	{
		AecDbShEarthWorm::ExtractRegionRooms(m_arRegionRooms,m_curSection.pReg);
	}
}

//矩形
void CYXKKDlg::OnBnClickedRadio1()
{
	UpdateData();
}

//圆
void CYXKKDlg::OnBnClickedRadio13()
{
	UpdateData();
}

void CYXKKDlg::OnBnClickedOk()
{
	UpdateData();
	if (m_dL1 < 1.e-10)
	{
		AfxMessageBox(_T("开孔尺寸L1太小"));
		return;
	}

	if (m_dL2 < 1.e-10)
	{
		AfxMessageBox(_T("开孔尺寸L2太小"));
		return;
	}

	if (m_dHSpace - m_dL1 < 1.e-3 && m_nH > 1)
	{
		AfxMessageBox(_T("水平间距尺寸必须大于开口长度尺寸或直径!"));
		return;
	}

	if (m_dVSpace - m_dL1 < 1.e-3 && m_nV > 1)
	{
		AfxMessageBox(_T("垂直间距尺寸必须大于开口长度尺寸或直径!"));
		return;
	}

	if (m_idxRoom == -1)
	{
		AfxMessageBox(_T("请选择舱室开洞!"));
		return;
	}

	if (m_bSpecThick && m_dSpecThick < 0.1)
	{
		AfxMessageBox(_T("指定开孔所在墙板壁厚太薄!请重新输入壁厚!"));
		return;
	}

	if (m_bAddHoop)
	{
		if (m_dX - m_dL1 < -1.e-6)
		{
			AfxMessageBox(_T("矩形孔加环扣结构长小于洞口L1!请重新输入尺寸!"));
			return;
		}
		if (m_dY - m_dW1 < -1.e-6)
		{
			AfxMessageBox(_T("矩形孔加环扣结构宽小于洞口W1!请重新输入尺寸!"));
			return;
		}

		if (m_dt < 1.e-3 || m_dZ < 1.e-3)
		{	
			AfxMessageBox(_T("环扣结构垛宽或高度尺寸不合理!请重新输入尺寸!"));
			return;
		}
	}

	UIDataCache::Write(_T("%d%d%d%i%i%i%d%i%s%i%i%d%d%i%d%i"), _T("CYXKKDlg")
		, &m_dL1 , &m_dL2 , &m_dL3
		, &m_nShape , &m_nPos , &m_bAllEw
		, &m_dW1
		, &m_idxRoom
		, &m_sCrossSectionScr
		, &m_nH
		, &m_nV
		, &m_dHSpace
		, &m_dVSpace
		, &m_bSpecThick
		, &m_dSpecThick
		, &m_bAddHoleCase);

	OnOK();
}

int CYXKKDlg::GetX3dSolidRecs(AecDbX3dGroup*& pGroup)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		return GetX3dSolidRecsShEw(pGroup);
	}

	//_T("RECT:3900x3600|2900x3600|400x300|EXT:...");//EXT为扩充字段
	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	double dSideAdd(.0);
	int nSideLR = worm.GetLeftOrRightThickAdd(dSideAdd);
	double dR((nSideLR == 1 ? dSideAdd : .0));
	double dL((nSideLR == 0 ? dSideAdd : .0));

	//外壁厚,内隔壁厚
	double dOutW = 0.0,dIntW = 0.0;
	if (arDatas.length() > 0)
	{
		dOutW = arDatas.last().x;
		dIntW = arDatas.last().y;
	}

	//总高度
	double dHeight = arDatas.first().y;
	dHeight += 2 * arDatas.last().x;

	//总宽度
	double dWidth = 0.0;
	for (int i = 0;i < arDatas.length()-1;i++)
	{
		dWidth += arDatas.at(i).x;
	}

	dWidth += (arDatas.length() - 2) * dIntW;
	dWidth += dOutW * 2.0;
	dWidth += dSideAdd;

	double dThick = dIntW;
	AcGeVector3d vtZ,vtStep;
	AcGePoint3d ptOrg;

	AcArray<ERoom> arRooms;
	ERoom room;
	AcGePoint2d ptThick;
	AcGeLineSeg3d ln(AcGePoint3d::kOrigin,AcGePoint3d(10.0,0.0,0));
	worm.GetSectionRoomsTo(ln,arRooms,ptThick);


	if (m_bAllEw)
	{
		if (m_nShape == 0)//矩形孔
		{
			switch (m_nPos)
			{
			case 0://上
			{
				dThick = dOutW;
				vtZ.set(0, 0, 1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, dHeight / 2.0 - 0.5 * dThick);
				break;
			}
			case 1://下
			{
				dThick = dOutW;
				vtZ.set(0, 0, -1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, -dHeight / 2.0 + 0.5 * dThick);
				break;
			}
			case 2://左
			{
				dThick = dOutW + dL;
				vtZ.set(0, 1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, dWidth / 2.0 - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
				break;
			}
			case 3://右
			{
				dThick = dOutW + dR;
				vtZ.set(0, -1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, -dWidth / 2.0 + 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
				break;
			}
			default:
				break;
			}
		}
		else//圆孔
		{
			switch (m_nPos)
			{
			case 0://上
			{
				dThick = dOutW;
				vtZ.set(0, 0, 1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, dHeight / 2.0 - dThick);
				break;
			}
			case 1://下
			{
				dThick = dOutW;
				vtZ.set(0, 0, -1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, -dHeight / 2.0 + dThick);
				break;
			}
			case 2://左
			{
				dThick = dOutW + dL;
				vtZ.set(0, 1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, dWidth / 2.0 - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
				break;
			}
			case 3://右
			{
				dThick = dOutW + dR;
				vtZ.set(0, -1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, -dWidth / 2.0 - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
				break;
			}
			default:
				break;
			}
		}
	}
	else
	{
		room = arRooms.at(m_idxRoom);

		if (m_nShape == 0)//矩形孔
		{
			switch (m_nPos)
			{
			case 0://上
			{
				dThick = dOutW;
				vtZ.set(0, 0, 1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, dHeight / 2.0 - 0.5 * dThick);
				break;
			}
			case 1://下
			{
				dThick = dOutW;
				vtZ.set(0, 0, -1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, -dHeight / 2.0 + 0.5 * dThick);
				break;
			}
			case 2://左
			{
				dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dL);
				vtZ.set(0, 1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[0].y + 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
				break;
			}
			case 3://右
			{
				dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dR);
				vtZ.set(0, -1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[1].y - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
				break;
			}
			default:
			{
				return 0;
				break;
			}
			}
		}
		else//圆孔
		{
			switch (m_nPos)
			{
			case 0://上
			{
				dThick = dOutW;
				vtZ.set(0, 0, 1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, dHeight / 2.0 - 0.5 * dThick);
				break;
			}
			case 1://下
			{
				dThick = dOutW;
				vtZ.set(0, 0, -1);
				vtStep.set(0, 1, 0);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, -dHeight / 2.0 + 0.5 * dThick);
				break;
			}
			case 2://左
			{
				dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dL);
				vtZ.set(0, 1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[0].y + 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
				break;
			}
			case 3://右
			{
				dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dR);
				vtZ.set(0, -1, 0);
				vtStep.set(0, 0, 1);
				ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[1].y - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
				break;
			}
			default:
			{
				return 0;
				break;
			}
			}
		}
	}

	if (m_bSpecThick)
	{
		dThick = m_dSpecThick;
	}

	if (pGroup != NULL)
	{
		pGroup->RemoveAll3dSolidRec();
	}
	else
	{
		pGroup = new AecDbX3dGroup;
	}

	AcDbX3dSolid* pXSolid = NULL;
	AcGePoint3d ptNewOrg = ptOrg;
	X3dSolidRec rec;

	if ( !m_sPoints.IsEmpty() )
	{
		if (m_bAddHoleCase)
		{
			pXSolid = new AcDbX3dSolid;
			pXSolid->CreateExtrude(ptOrg,vtZ,m_sPoints,dThick,0.0);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolUnite;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);
		}

		pXSolid = new AcDbX3dSolid;
		pXSolid->CreateExtrude(ptOrg,vtZ,m_sPointsIn,dThick + 0.01,0.0);
		rec.pXSolid = pXSolid;
		rec.bType = AcDb::kBoolSubtract;
		_tcscpy(rec.szLockId,IDCreate());
		pGroup->AddX3dSolidRec(rec);
	}
	else
	{
		AcGePoint3d ptOrgHoop;
		for(int i = 0;i < m_nH;i++)
		{
			ptNewOrg = ptOrg + i * AcGeVector3d::kXAxis * m_dHSpace;
			for (int j = 0;j < m_nV;j++)
			{
				if (m_nShape == 0)//矩形孔
				{
					//外部套管 方管子LxWxtxH 示意
					if (m_bAddHoleCase)
					{
						pXSolid = new AcDbX3dSolid;
						pXSolid->Create(AcDbX3dSolid::kRectTube,ptNewOrg,vtZ,4,m_dL1+0.04,m_dW1+0.04,0.02,dThick);
						rec.pXSolid = pXSolid;
						rec.bType = AcDb::kBoolUnite;
						_tcscpy(rec.szLockId,IDCreate());
						pGroup->AddX3dSolidRec(rec);
					}

					//BOX LxWxH
					pXSolid = new AcDbX3dSolid;
					pXSolid->Create(AcDbX3dSolid::kBox,ptNewOrg,vtZ,3,m_dL1,m_dW1,dThick);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolSubtract;
					_tcscpy(rec.szLockId,IDCreate());
					pGroup->AddX3dSolidRec(rec);

					if (m_bAddHoop)
					{
						vtZ.normalize();
						ptOrgHoop = ptNewOrg;
						ptOrgHoop += vtZ * 0.5 * dThick;
						ptOrgHoop += vtZ * 0.5 * m_dZ;

						pXSolid = new AcDbX3dSolid;
						pXSolid->Create(AcDbX3dSolid::kBox,ptOrgHoop,vtZ,3,m_dX + 2.0 * m_dt,m_dY + 2.0 * m_dt,m_dZ);
						rec.pXSolid = pXSolid;
						rec.bType = AcDb::kBoolUnite;
						_tcscpy(rec.szLockId,IDCreate());
						pGroup->AddX3dSolidRec(rec);

						pXSolid = new AcDbX3dSolid;
						pXSolid->Create(AcDbX3dSolid::kBox,ptOrgHoop,vtZ,3,m_dX,m_dY,m_dZ);
						rec.pXSolid = pXSolid;
						rec.bType = AcDb::kBoolSubtract;
						_tcscpy(rec.szLockId,IDCreate());
						pGroup->AddX3dSolidRec(rec);
					}
				}
				else
				{
					//外部套管 圆管rxtxH
					if (m_bAddHoleCase)
					{
						pXSolid = new AcDbX3dSolid;
						pXSolid->Create(AcDbX3dSolid::kPipe,ptNewOrg,vtZ,3,m_dL1 / 2.0+0.04,0.02,dThick);//壁厚20
						rec.pXSolid = pXSolid;
						rec.bType = AcDb::kBoolUnite;
						_tcscpy(rec.szLockId,IDCreate());
						pGroup->AddX3dSolidRec(rec);
					}

					//CYL RxH
					pXSolid = new AcDbX3dSolid;
					pXSolid->Create(AcDbX3dSolid::kCylinder,ptNewOrg,vtZ,2,m_dL1 / 2.0,dThick);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolSubtract;
					_tcscpy(rec.szLockId,IDCreate());
					pGroup->AddX3dSolidRec(rec);
				}
				ptNewOrg += vtStep * m_dVSpace;
			}
		}
	}

	pGroup->SetOrgPoint( ptOrg );
	pGroup->SetAxis(X,AcGeVector3d::kXAxis);
	pGroup->SetAxis(Y,AcGeVector3d::kYAxis);
	pGroup->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	pGroup->GetSpecialtyData()->SetAt(_T("m_dL1"),m_dL1);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dDn"),AS_M2MM(m_dL1));
	pGroup->GetSpecialtyData()->SetAt(_T("m_dL2"),m_dL2);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dL3"),m_dL3);
	pGroup->GetSpecialtyData()->SetAt(_T("m_nShape"),m_nShape);
	pGroup->GetSpecialtyData()->SetAt(_T("m_nPos"),m_nPos);
	pGroup->GetSpecialtyData()->SetAt(_T("m_bAllEw"),m_bAllEw);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dW1"),m_dW1);
	pGroup->GetSpecialtyData()->SetAt(_T("m_nH"),m_nH);
	pGroup->GetSpecialtyData()->SetAt(_T("m_nV"),m_nV);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dHSpace"),m_dHSpace);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dVSpace"),m_dVSpace);
	pGroup->GetSpecialtyData()->SetAt(_T("m_idxRoom"),m_idxRoom);
	pGroup->GetSpecialtyData()->SetAt(_T("m_bSpecThick"),m_bSpecThick);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dSpecThick"),m_dSpecThick);
	pGroup->GetSpecialtyData()->SetAt(_T("m_bAddHoleCase"),m_bAddHoleCase);
	pGroup->GetSpecialtyData()->SetAt(_T("m_sCrossSectionScr"),m_sCrossSectionScr);
	pGroup->GetSpecialtyData()->SetAt(_T("m_sMaterial"),m_sMaterial);
	pGroup->GetSpecialtyData()->SetAt(_T("m_sPoints"),m_sPoints);
	pGroup->GetSpecialtyData()->SetAt(_T("m_sPointsIn"),m_sPointsIn);

	pGroup->GetSpecialtyData()->SetAt(_T("m_bAddHoop"),m_bAddHoop);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dX"),m_dX);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dY"),m_dY);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dZ"),m_dZ);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dt"),m_dt);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dHoleH"),m_dHoleH);

	return TRUE;
}

STSection* CYXKKDlg::GetShEwSection() const
{
	if (m_sCrossSectionScr.Find(_T("RECT")) != -1)
	{
		return NULL;
	}

	AcGePoint3d pt(0,0,0);
	CString sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.sat");

	STSection* pSection = new STSection;
	pSection->pt = pt;

	CStdioFile file;
	if (file.Open(sFullPath,CFile::modeCreate |CFile::modeWrite ))
	{
		CString sScr = m_sCrossSectionScr;
		int nPos = m_sCrossSectionScr.Find(_T("<ELAGN:") );
		if (nPos != -1)
		{
			sScr = m_sCrossSectionScr.Mid(0,nPos);
		}
		file.WriteString(sScr);
		file.Close();

		CString sX,sY;
		CString sPt = m_sCrossSectionScr.Mid(nPos);
		sPt.TrimLeft(_T("<ELAGN:"));
		sPt.TrimRight(_T(">"));
		nPos = sPt.Find(_T(','));
		if (nPos != -1)
		{
			CStringArray arInfo;
			CoreTools::SplitStrintToArray(sPt,arInfo,_T(','));

			if (arInfo.GetSize() >= 2)
			{
				sX = arInfo.GetAt(0);
				sY = arInfo.GetAt(1);
				pSection->pt.set(_ttof(sX),_ttof(sY),0.0);

				if (arInfo.GetSize() >= 6)
				{
					pSection->dThick[0] = _ttof(arInfo.GetAt(2));
					pSection->dThick[1] = _ttof(arInfo.GetAt(3));
					pSection->dThick[2] = _ttof(arInfo.GetAt(4));
					pSection->dThick[3] = _ttof(arInfo.GetAt(5));
				}
			}
		}
		else//读取壁厚
		{
			CString sThickFile = FilePath::GetSysDir();
			sThickFile.MakeLower();
			sThickFile += _T("\\DGJM.ext");

			CString sLine;
			CStdioFile filet;
			if (filet.Open(sThickFile,CFile::modeRead | CFile::typeText))
			{
				sLine = _T("");
				filet.ReadString(sLine);

				sLine.TrimRight(_T('\n'));
				CStringArray arInfo;
				SplitStrintToArray(sLine,arInfo,_T(','));

				if (arInfo.GetSize() >= 6)
				{
					pSection->dThick[0] = _ttof(arInfo.GetAt(2));
					pSection->dThick[1] = _ttof(arInfo.GetAt(3));
					pSection->dThick[2] = _ttof(arInfo.GetAt(4));
					pSection->dThick[3] = _ttof(arInfo.GetAt(5));
				}
				filet.Close();
			}
		}
	}

	pSection->pReg = NULL;

	AcDbVoidPtrArray arBodyPtrs;
	if ( Acad::eOk == AcDbBody::acisIn(sFullPath,arBodyPtrs) )
	{
		if (arBodyPtrs.length() > 0)
		{
			AcDbEntity* pEnt = (AcDbEntity*)arBodyPtrs.first();
			AcDbRegion* pRegion = AcDbRegion::cast(pEnt);

			if (pRegion != NULL)
			{
				pSection->pReg = pRegion;
			}
		}
	}
	return pSection;
}

int CYXKKDlg::GetX3dSolidRecsShEw(AecDbX3dGroup*& pGroup)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		AecDbShEarthWorm dbEW;
		AcGePoint3d ptSta(0,0,0);
		AcGePoint3d ptEnd(10,0,0);
		AcDbLine ln(ptSta,ptEnd);

		AecDb3dRoadAxisLine* pRoadLn = new AecDb3dRoadAxisLine;
		pRoadLn->AppendCurveSeg(&ln);

		STSection* pSection = GetShEwSection();
		if (pSection == NULL )
		{
			return 0;
		}

		dbEW.GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
		dbEW.SetSection(pSection->pReg, pSection->pt);
		dbEW.SetBaseCurve(pRoadLn);
		dbEW.GetSpecialtyData()->SetAt(KEY_ADDTIONSCR,pSection->sAddtionScr);
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT1,AS_MUNIT(pSection->dThick[0]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT2,AS_MUNIT(pSection->dThick[1]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT4,AS_MUNIT(pSection->dThick[2]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT5,AS_MUNIT(pSection->dThick[3]));

		delete pSection->pReg;
		pSection->pReg = NULL;
		delete pSection;
		delete pRoadLn;

		//外壁厚,内隔壁厚
		double dOutW = 0.0,dIntW = 0.0;
		dOutW = AS_MUNIT(pSection->dThick[0]);
		dIntW = AS_MUNIT(pSection->dThick[1]);

		if (dOutW < m_dHoleH)
			dOutW = m_dHoleH;

		double dSideAdd(.0);
		double dR = 0.0;
		double dL = 0.0;

		AcGePoint2d ptrODtTop,ptrODtBom,ptODt;
		dbEW.GetODAndID(ptrODtTop,ptrODtBom);
		dbEW.GetODAndThick(ptODt);

		//总高度
		double dHeight = ptrODtTop.x;

		//总宽度
		double dWidth = ptODt.x;

		double dThick = dIntW;
		AcGeVector3d vtZ,vtStep;
		AcGePoint3d ptOrg;

		AcArray<ERoom> arRooms;
		ERoom room;
		AcGePoint2d ptThick;
		AcGeLineSeg3d ln3d(ptSta,ptEnd);
		dbEW.GetSectionRoomsTo(ln3d,arRooms,ptThick);

		if (m_bAllEw)
		{
			if (m_nShape == 0)//矩形孔
			{
				switch (m_nPos)
				{
				case 0://上
					{
						dThick = dOutW;
						vtZ.set(0, 0, 1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, dHeight / 2.0 - 0.5 * dThick);
						break;
					}
				case 1://下
					{
						dThick = dOutW;
						vtZ.set(0, 0, -1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, -dHeight / 2.0 + 0.5 * dThick);
						break;
					}
				case 2://左
					{
						dThick = dOutW + dL;
						vtZ.set(0, 1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, dWidth / 2.0 - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
						break;
					}
				case 3://右
					{
						dThick = dOutW + dR;
						vtZ.set(0, -1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, -dWidth / 2.0 + 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
						break;
					}
				default:
					break;
				}
			}
			else//圆孔
			{
				switch (m_nPos)
				{
				case 0://上
					{
						dThick = dOutW;
						vtZ.set(0, 0, 1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, dHeight / 2.0 - dThick);
						break;
					}
				case 1://下
					{
						dThick = dOutW;
						vtZ.set(0, 0, -1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, 0, -dHeight / 2.0 + dThick);
						break;
					}
				case 2://左
					{
						dThick = dOutW + dL;
						vtZ.set(0, 1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, dWidth / 2.0 - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
						break;
					}
				case 3://右
					{
						dThick = dOutW + dR;
						vtZ.set(0, -1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, -dWidth / 2.0 - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
						break;
					}
				default:
					break;
				}
			}
		}
		else
		{
			room = arRooms.at(m_idxRoom);

			if (m_nShape == 0)//矩形孔
			{
				switch (m_nPos)
				{
				case 0://上
					{
						dThick = dOutW;
						vtZ.set(0, 0, 1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, dHeight / 2.0 - 0.5 * dThick);
						break;
					}
				case 1://下
					{
						dThick = dOutW;
						vtZ.set(0, 0, -1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, -dHeight / 2.0 + 0.5 * dThick);
						break;
					}
				case 2://左
					{
						dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dL);
						vtZ.set(0, 1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[0].y + 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
						break;
					}
				case 3://右
					{
						dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dR);
						vtZ.set(0, -1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[1].y - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dW1 / 2.0);
						break;
					}
				default:
					{
						return 0;
						break;
					}
				}
			}
			else//圆孔
			{
				switch (m_nPos)
				{
				case 0://上
					{
						dThick = dOutW;
						vtZ.set(0, 0, 1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, dHeight / 2.0 - 0.5 * dThick);
						break;
					}
				case 1://下
					{
						dThick = dOutW;
						vtZ.set(0, 0, -1);
						vtStep.set(0, 1, 0);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, (room.ptGe[2].y + room.ptGe[3].y) / 2.0, -dHeight / 2.0 + 0.5 * dThick);
						break;
					}
				case 2://左
					{
						dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dL);
						vtZ.set(0, 1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[0].y + 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
						break;
					}
				case 3://右
					{
						dThick = (m_idxRoom > 0 && m_idxRoom < arRooms.length()) ? dIntW : (dOutW + dR);
						vtZ.set(0, -1, 0);
						vtStep.set(0, 0, 1);
						ptOrg.set(m_dL2 + m_dL1 / 2.0, room.ptGe[1].y - 0.5 * dThick, -dHeight / 2.0 + dOutW + m_dL3 + m_dL1 / 2.0);
						break;
					}
				default:
					{
						return 0;
						break;
					}
				}
			}
		}

		if (m_bSpecThick)
		{
			dThick = m_dSpecThick;
		}

		if (pGroup != NULL)
		{
			pGroup->RemoveAll3dSolidRec();
		}
		else
		{
			pGroup = new AecDbX3dGroup;
		}

		AcDbX3dSolid* pXSolid = NULL;
		AcGePoint3d ptNewOrg = ptOrg;
		X3dSolidRec rec;

		if ( !m_sPoints.IsEmpty() )
		{
			if (m_bAddHoleCase)
			{
				pXSolid = new AcDbX3dSolid;
				pXSolid->CreateExtrude(ptOrg,vtZ,m_sPoints,dThick,0.0);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);
			}

			pXSolid = new AcDbX3dSolid;
			pXSolid->CreateExtrude(ptOrg,vtZ,m_sPointsIn,dThick + 0.01,0.0);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);
		}
		else
		{
			AcGePoint3d ptOrgHoop;
			for(int i = 0;i < m_nH;i++)
			{
				ptNewOrg = ptOrg + i * AcGeVector3d::kXAxis * m_dHSpace;
				for (int j = 0;j < m_nV;j++)
				{
					if (m_nShape == 0)//矩形孔
					{
						//外部套管 方管子LxWxtxH 示意
						if (m_bAddHoleCase)
						{
							pXSolid = new AcDbX3dSolid;
							pXSolid->Create(AcDbX3dSolid::kRectTube,ptNewOrg,vtZ,4,m_dL1+0.04,m_dW1+0.04,0.02,dThick);
							rec.pXSolid = pXSolid;
							rec.bType = AcDb::kBoolUnite;
							_tcscpy(rec.szLockId,IDCreate());
							pGroup->AddX3dSolidRec(rec);
						}

						//BOX LxWxH
						pXSolid = new AcDbX3dSolid;
						pXSolid->Create(AcDbX3dSolid::kBox,ptNewOrg,vtZ,3,m_dL1,m_dW1,dThick);
						rec.pXSolid = pXSolid;
						rec.bType = AcDb::kBoolSubtract;
						_tcscpy(rec.szLockId,IDCreate());
						pGroup->AddX3dSolidRec(rec);

						if (m_bAddHoop)
						{
							vtZ.normalize();
							ptOrgHoop = ptNewOrg;
							ptOrgHoop += vtZ * 0.5 * dThick;
							ptOrgHoop += vtZ * 0.5 * m_dZ;

							pXSolid = new AcDbX3dSolid;
							pXSolid->Create(AcDbX3dSolid::kBox,ptOrgHoop,vtZ,3,m_dX + 2.0 * m_dt,m_dY + 2.0 * m_dt,m_dZ);
							rec.pXSolid = pXSolid;
							rec.bType = AcDb::kBoolUnite;
							_tcscpy(rec.szLockId,IDCreate());
							pGroup->AddX3dSolidRec(rec);

							pXSolid = new AcDbX3dSolid;
							pXSolid->Create(AcDbX3dSolid::kBox,ptOrgHoop,vtZ,3,m_dX,m_dY,m_dZ);
							rec.pXSolid = pXSolid;
							rec.bType = AcDb::kBoolSubtract;
							_tcscpy(rec.szLockId,IDCreate());
							pGroup->AddX3dSolidRec(rec);
						}
					}
					else
					{
						//外部套管 圆管rxtxH
						if (m_bAddHoleCase)
						{
							pXSolid = new AcDbX3dSolid;
							pXSolid->Create(AcDbX3dSolid::kPipe,ptNewOrg,vtZ,3,m_dL1 / 2.0+0.04,0.02,dThick);//壁厚20
							rec.pXSolid = pXSolid;
							rec.bType = AcDb::kBoolUnite;
							_tcscpy(rec.szLockId,IDCreate());
							pGroup->AddX3dSolidRec(rec);
						}

						//CYL RxH
						pXSolid = new AcDbX3dSolid;
						pXSolid->Create(AcDbX3dSolid::kCylinder,ptNewOrg,vtZ,2,m_dL1 / 2.0,dThick);
						rec.pXSolid = pXSolid;
						rec.bType = AcDb::kBoolSubtract;
						_tcscpy(rec.szLockId,IDCreate());
						pGroup->AddX3dSolidRec(rec);
					}
					ptNewOrg += vtStep * m_dVSpace;
				}
			}
		}

		pGroup->SetOrgPoint( ptOrg );
		pGroup->SetAxis(X,AcGeVector3d::kXAxis);
		pGroup->SetAxis(Y,AcGeVector3d::kYAxis);
		pGroup->SetAxis(Z,AcGeVector3d::kZAxis);

		//序列化BIM数据
		pGroup->GetSpecialtyData()->SetAt(_T("m_dL1"),m_dL1);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dDn"),AS_M2MM(m_dL1));
		pGroup->GetSpecialtyData()->SetAt(_T("m_dL2"),m_dL2);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dL3"),m_dL3);
		pGroup->GetSpecialtyData()->SetAt(_T("m_nShape"),m_nShape);
		pGroup->GetSpecialtyData()->SetAt(_T("m_nPos"),m_nPos);
		pGroup->GetSpecialtyData()->SetAt(_T("m_bAllEw"),m_bAllEw);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dW1"),m_dW1);
		pGroup->GetSpecialtyData()->SetAt(_T("m_nH"),m_nH);
		pGroup->GetSpecialtyData()->SetAt(_T("m_nV"),m_nV);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dHSpace"),m_dHSpace);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dVSpace"),m_dVSpace);
		pGroup->GetSpecialtyData()->SetAt(_T("m_idxRoom"),m_idxRoom);
		pGroup->GetSpecialtyData()->SetAt(_T("m_bSpecThick"),m_bSpecThick);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dSpecThick"),m_dSpecThick);
		pGroup->GetSpecialtyData()->SetAt(_T("m_bAddHoleCase"),m_bAddHoleCase);
		pGroup->GetSpecialtyData()->SetAt(_T("m_sCrossSectionScr"),m_sCrossSectionScr);
		pGroup->GetSpecialtyData()->SetAt(_T("m_sMaterial"),m_sMaterial);
		pGroup->GetSpecialtyData()->SetAt(_T("m_sPoints"),m_sPoints);
		pGroup->GetSpecialtyData()->SetAt(_T("m_sPointsIn"),m_sPointsIn);

		pGroup->GetSpecialtyData()->SetAt(_T("m_bAddHoop"),m_bAddHoop);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dX"),m_dX);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dY"),m_dY);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dZ"),m_dZ);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dt"),m_dt);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dHoleH"),m_dHoleH);

		return TRUE;
	}
	return FALSE;
}

LRESULT CYXKKDlg::OnViewLButtonDown(WPARAM wp, LPARAM lp)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		return OnViewShEwLButtonDown(wp,lp);
	}

	AcGePoint3d* pPt = (AcGePoint3d*)lp;
	pPt->z = 0.0;
	//判断 点落在 room 内
	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	AcGeLineSeg3d ln;
	AcGePoint3d pt2(1000.0, 0, 0);
	ln.set(AcGePoint3d::kOrigin, pt2);

	AcGePoint3d ptGe[4];
	AcDbVoidPtrArray arRegPtrs;
	int nRooms = worm.CreateSectionRoomRegion(ln, eType, arDatas, arRegPtrs);
	if (nRooms > 0)
	{
		AcDbRegion* pReg = NULL;
		for (int i = 0; i < arRegPtrs.length(); i++)
		{
			pReg = (AcDbRegion*)arRegPtrs.at(i);
			if (pReg != NULL)
			{
				AcDbExtents ext;
				pReg->getGeomExtents(ext);

				ptGe[0] = ext.minPoint();
				ptGe[1] = ptGe[0];
				ptGe[1].x = ext.maxPoint().x;
				ptGe[2] = ext.maxPoint();
				ptGe[3] = ptGe[0];
				ptGe[3].y = ext.maxPoint().y;

				if (KTCADUtilityEx::IsPointInBoundary(*pPt, ptGe[0], ptGe[2]))
				{
					m_idxRoom = i;

					AcGsView* pView = m_wndViewCtrl.view();
					AcGsModel* pModel = m_wndViewCtrl.model();
					if (pView != NULL)
					{
						if (m_pRectCell != NULL)
							pView->erase(m_pRectCell);
					}

					if (m_pRectCell != NULL)
					{
						for (int i = 0; i < 4; i++)
						{
							m_pRectCell->setPointAt(i, ptGe[i].convert2d(AcGePlane::kXYPlane));
						}
					}

					if (pView != NULL)
					{
						pView->add(m_pRectCell, pModel);
					}

					break;
				}
			}
		}

		if (m_idxRoom == -1)
		{
			m_pRectCell->setPointAt(0, AcGePoint2d::kOrigin);
			m_pRectCell->setPointAt(1, AcGePoint2d(1, 0));
			m_pRectCell->setPointAt(2, AcGePoint2d(1, 1));
			m_pRectCell->setPointAt(3, AcGePoint2d(0, 1));
		}

		FreeBuffer(arRegPtrs);

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();
	}
	return 0L;
}

void CYXKKDlg::HitShEarthWorm(int idxRoom)
{
	if (m_curSection.pReg != NULL)
	{
		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		//判断点落在region内
		AcDbExtents ext;
		AcDbCurve* pPl = NULL;
		AcDbRegion* pRegion = NULL;
		AcDbRay rayx1,rayx2;
		AcDbCurve* pCurve = NULL;
		AcGePoint3dArray arPts1,arPts2;

		AcDbVoidPtrArray arCurPtrs,arSubEntPtrs;
		if (idxRoom > -1 && idxRoom < m_arRegionRooms.length())
		{
			pRegion = (AcDbRegion*)m_arRegionRooms.at(idxRoom);

			arCurPtrs.removeAll();
			pRegion->explode(arCurPtrs);

			arSubEntPtrs.removeAll();
			pCurve = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs,arSubEntPtrs);
			pPl = AcDbCurve::cast(pCurve);
			if (pPl != NULL)
			{
				pPl->intersectWith(&rayx1,AcDb::kOnBothOperands,arPts1);
				pPl->intersectWith(&rayx2,AcDb::kOnBothOperands,arPts2);

				if (!arPts1.isEmpty() && !arPts2.isEmpty())
				{
					if (pView != NULL && m_pRegionRoom != NULL)
					{
						pView->erase(m_pRegionRoom);
					}

					m_pRegionRoom = pRegion;
					m_pRegionRoom->setColorIndex(6);

					if (pView != NULL)
					{
						pView->add(m_pRegionRoom, pModel);
					}

					delete pPl;
					m_wndViewCtrl.view()->invalidate();
					m_wndViewCtrl.RedrawWindow();
					return;
				}
			}	
		}
	}
}

LRESULT CYXKKDlg::OnViewShEwLButtonDown(WPARAM wp, LPARAM lp)
{
	//鼠标点击的点
	AcGePoint3d* pPt = (AcGePoint3d*)lp;
	pPt->z = 0.0;

	if (m_curSection.pReg != NULL)
	{
		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		//判断点落在region内
		AcDbExtents ext;
		AcDbCurve* pPl = NULL;
		AcDbRegion* pRegion = NULL;
		AcDbRay rayx1,rayx2;
		AcDbCurve* pCurve = NULL;
		AcGePoint3dArray arPts1,arPts2;

		rayx1.setBasePoint(*pPt);
		rayx1.setUnitDir(AcGeVector3d::kXAxis);

		rayx2.setBasePoint(*pPt);
		rayx2.setUnitDir(-AcGeVector3d::kXAxis);

		AcDbVoidPtrArray arCurPtrs,arSubEntPtrs;
		for (int i = 0;i < m_arRegionRooms.length();i++)
		{
			pRegion = (AcDbRegion*)m_arRegionRooms.at(i);

			arCurPtrs.removeAll();
			pRegion->explode(arCurPtrs);

			arSubEntPtrs.removeAll();
			pCurve = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs,arSubEntPtrs);
			pPl = AcDbCurve::cast(pCurve);
			if (pPl != NULL)
			{
				pPl->intersectWith(&rayx1,AcDb::kOnBothOperands,arPts1);
				pPl->intersectWith(&rayx2,AcDb::kOnBothOperands,arPts2);

				if (!arPts1.isEmpty() && !arPts2.isEmpty())
				{
					if (pView != NULL && m_pRegionRoom != NULL)
					{
						pView->erase(m_pRegionRoom);
					}

					m_pRegionRoom = pRegion;
					m_pRegionRoom->setColorIndex(6);

					if (pView != NULL)
					{
						pView->add(m_pRegionRoom, pModel);
					}

					delete pPl;
					m_wndViewCtrl.view()->invalidate();
					m_wndViewCtrl.RedrawWindow();
					break;
				}
				delete pPl;
			}	
		}
	}
	return 0L;
}

void CYXKKDlg::OnBnClickedButton1()
{
	//尺寸示意图
	CCCSYDlg dlg;
	dlg.SetBmpFileName(_T("YXKK.bmp"));
	dlg.DoModal();
}

void CYXKKDlg::OnBnClickedButton2()
{
	UpdateData(TRUE);

	EnableWindow(FALSE);
	CWnd* pFrame = acedGetAcadFrame();
	pFrame->EnableWindow(TRUE);
	ShowWindow(SW_HIDE);
	pFrame->SetFocus();

	ads_point pt;
	int nRes = acedGetPoint(NULL,_T("\n选择管道接口点:"),pt);
	if (nRes == RTNORM)
	{
		AcGePoint3d ptInf = asPnt3d(pt);

		//选择管道，弯头等
		AcAxDocLock lock;
		AecDbEarthWormFitting* pFit = NULL;
		if ( Acad::eOk == acdbOpenAcDbEntity((AcDbEntity*&)pFit,m_idEWFit,AcDb::kForRead))
		{
			AecDbX3dGroup* pGroupNext = NULL;
			int nPos = 0;
			double dDn = 0.0,dSpace = 0.0;

			while( pFit->GetX3dGroup(nPos,pGroupNext) )
			{
				AcArray<AecInterface> arInfs;
				if ( pGroupNext->GetInterface(arInfs) )
				{
					pGroupNext->GetSpecialtyData()->GetAt(_T("m_dDn"),dDn);
					for (int i = 0;i < arInfs.length();i++)
					{
						dSpace = ptInf.distanceTo(arInfs.at(i).ptPos);
						if ( fabs( dSpace - 0.5 * AS_MUNIT(dDn) ) < 1.e-1) //10mm
						{
							AcGePoint3d ptInf = arInfs.at(i).ptPos;
							AcGeVector3d vtDir = arInfs.at(i).vtDir;

							m_dL2 = ptInf.x - 0.5 * AS_MUNIT(dDn);//位置

							//复制pGroup的材料信息和管径
							double dDn;
							int idxRoom = -1;
							pGroupNext->GetSpecialtyData()->GetAt(_T("m_dDn"),dDn);
							pGroupNext->GetSpecialtyData()->GetAt(_T("m_idxRoom"),idxRoom);

							m_dL1 = AS_MUNIT(dDn);
							if (vtDir.isCodirectionalTo( AcGeVector3d::kZAxis) )
							{
								m_nPos = 0;
							}
							if (vtDir.isCodirectionalTo( -AcGeVector3d::kZAxis) )
							{
								m_nPos = 1;
							}
							if (vtDir.isCodirectionalTo( AcGeVector3d::kYAxis) )
							{
								m_nPos = 2;
							}
							if (vtDir.isCodirectionalTo( -AcGeVector3d::kXAxis) )
							{
								m_nPos = 3;
							}

							if (idxRoom > -1)
							{
								m_idxRoom = idxRoom;
								HitEarthWorm(m_idxRoom);
							}

							break;
						}
					}
				}
			}
			pFit->close();
		}
	}

	pFrame->EnableWindow(FALSE);
	ShowWindow(SW_SHOW);
	EnableWindow(TRUE);

	UpdateData(FALSE);
}

void CYXKKDlg::OnBnClickedButton3()
{
	UpdateData();

	m_sPoints = _T("");
	EnableWindow(FALSE);
	CWnd* pFrame = acedGetAcadFrame();
	pFrame->EnableWindow(TRUE);
	ShowWindow(SW_HIDE);
	pFrame->SetFocus();

	AcAxDocLock lock;
	ads_point pt;
	ads_name ent;
	int nRes = acedEntSel(_T("\n请选择闭合pline线:"),ent,pt);
	if (nRes == RTNORM)
	{
		AcDbObjectId id;
		acdbGetObjectId(id,ent);

		CString sText;
		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead))
		{
			AcDbPolyline* pPl = AcDbPolyline::cast(pEnt);
			if (pPl != NULL)
			{
				AcGePoint2d ptSta;
				pPl->getPointAt(0,ptSta);

				AcGeVector2d vtMove = ptSta.asVector();
				vtMove.negate();

				m_sPoints = _T("");
				double dBulge = 0.0;
				AcGePoint2d pt2d;
				AcGePoint2dArray arPt2ds;
				for (int i = 0;i < pPl->numVerts();i++)
				{
					pPl->getPointAt(i,pt2d);
					pPl->getBulgeAt(i,dBulge);

					pt2d += vtMove;

					//if (arPt2ds.find(pt2d) == -1)
					{
						arPt2ds.append(pt2d);

						sText.Format(_T("%g,%g@%g,"),pt2d.x,pt2d.y,dBulge);
						m_sPoints += sText;
					}
				}

				if ( arPt2ds.last().distanceTo(arPt2ds.first()) > 1.e-2)
				{
					pt2d = arPt2ds.first();
					sText.Format(_T("%g,%g@0.0,"),pt2d.x,pt2d.y);
					m_sPoints += sText;
				}
				m_sPoints.TrimRight(_T(","));


				AcDbVoidPtrArray arOffPtrs,arOffPtrs2;
				pPl->getOffsetCurves(0.01,arOffPtrs);
				pPl->getOffsetCurves(-0.01,arOffPtrs2);

				if (arOffPtrs.length() == 1 && arOffPtrs2.length() == 1)
				{
					AcDbEntity* pEntt = (AcDbEntity*)arOffPtrs.at(0);
					AcDbPolyline* pPl2 = AcDbPolyline::cast(pEntt);

					AcDbEntity* pEntt2 = (AcDbEntity*)arOffPtrs2.at(0);
					AcDbPolyline* pPl22 = AcDbPolyline::cast(pEntt2);

					if (pPl2 != NULL && pPl22 != NULL)
					{
						double dArea1 = 0.0,dArea2 = 0.0;
						pPl2->getArea(dArea1);
						pPl22->getArea(dArea2);

						AcDbPolyline* pPlMin = ( fabs(dArea2) - fabs(dArea1) ) < 1.e-10 ? pPl22 : pPl2;
						arPt2ds.removeAll();

						for (int i = 0;i < pPlMin->numVerts();i++)
						{
							pPlMin->getPointAt(i,pt2d);
							pPlMin->getBulgeAt(i,dBulge);

							pt2d += vtMove;

							//if (arPt2ds.find(pt2d) == -1)
							{
								arPt2ds.append(pt2d);

								sText.Format(_T("%g,%g@%g,"),pt2d.x,pt2d.y,dBulge);
								m_sPointsIn += sText;
							}
						}

						if ( arPt2ds.last().distanceTo(arPt2ds.first()) > 1.e-2)
						{
							pt2d = arPt2ds.first();
							sText.Format(_T("%g,%g@0.0,"),pt2d.x,pt2d.y);
							m_sPointsIn += sText;
						}
						m_sPointsIn.TrimRight(_T(","));

						DELETE_PTR(pPl2);
						DELETE_PTR(pPl22);
					}
				}
			}
			else
			{
				acutPrintf(_T("\n选择的实体不是pline线实体!"));
			}
			pEnt->close();
		}
	}

	pFrame->EnableWindow(FALSE);
	ShowWindow(SW_SHOW);
	EnableWindow(TRUE);

	UpdateData(FALSE);
}

void CYXKKDlg::OnBnClickedButton4()
{
	//尺寸示意图
	CCCSYDlg dlg;
	dlg.SetBmpFileName(_T("HOLEHOOP.bmp"));
	dlg.DoModal();
}