#include "stdafx.h" #include "EdJigEx.h" #include "DbMultiViewInsert.h" #include "resource.h" #include "InsertBlockDlg.h" #include "imgdef.h" // AcDbRasterImageDef and reactors, #include "imgent.h" #include "actrans.h" // 转换成ADS代码 int TSymbEdJig::GetRetCode(int retCode, int *kwordId) const { int ret = retCode; if (ret == AcEdJig::kCancel) ret = RTCAN; else if(ret == AcEdJig::kNull) ret = RTNONE; else if (ret <= 0) ret = RTNORM; else { if(kwordId) *kwordId = ret-1; ret = RTKWORD; } return ret; } // 开始执行拖动 int TSymbEdJig::DoIt(int *keyIndex) { int nRetCode=0; acedGetAcadDwgView()->SetFocus(); //屏幕菜单点取时, 命令焦点没有在图形窗口 setDispPrompt(m_sPrompt); if(!!m_sKeyword && keyIndex) { INITGET_BEG(-1, m_sKeyword); try { nRetCode = drag(); } catch(...) { nRetCode=AcEdJig::kCancel; } INITGET_END(); } else { try { nRetCode = drag(); } catch(...) { nRetCode=AcEdJig::kCancel; } } nRetCode=GetRetCode(nRetCode, keyIndex); return nRetCode; } AcEdJig::DragStatus TSymbEdJig::GetPoint(XPoint &pt) { return acquirePoint(pt); } // 反馈 AcEdJig::DragStatus TSymbEdJig::sampler() { DragStatus stat; setUserInputControls((UserInputControls) (AcEdJig::kAccept3dCoordinates|AcEdJig::kNullResponseAccepted)); if (!!m_sKeyword) setKeywordList(m_sKeyword); else setKeywordList(NULL); XPoint ptTemp; stat=GetPoint(ptTemp); if(stat == AcEdJig::kNormal) { if (IsPosChanged(ptTemp)) { m_ptResult=ptTemp; } else return AcEdJig::kNoChange; } return stat; } BOOL TSymbEdJig::IsPosChanged(XPoint ptNew) const { return (ptNew.Distance(m_ptResult)>_DIST_SNAP); } //////////////////////////////////////////////////////////////////////////////////////////////////////////////////// TPolyEdJig::TPolyEdJig(AcDbPolyline *pElev) { m_pDrawEnt=pElev; } AcEdJig::DragStatus TPolyEdJig::GetPoint(XPoint &pt) { AcGePoint3d ptBase; m_pDrawEnt->getPointAt(m_pDrawEnt->numVerts()-1, ptBase); //if(m_nOperCode!=kArcMidPoint m_nOperCode!=kArcRadius) // return acquirePoint(pt); return acquirePoint(pt, ptBase); } // 开始执行拖动 int TPolyEdJig::DoIt(int *keyIndex) { XPoly2D poly2d; PolyConvert(*m_pDrawEnt, poly2d); if(m_nOperCode==kLinePoint || m_nOperCode==kArcPoint) { m_ptResult=*poly2d.Tail(); } else if(m_nOperCode==kArcMidPoint) { // MidPoint XCurveSegment cv; poly2d.Nth(poly2d.TotalSegments()-1, cv); m_ptResult=cv.MidPoint(); } int nRet = TSymbEdJig::DoIt(keyIndex); return nRet; } // 更新实体数据 Adesk::Boolean TPolyEdJig::update() { Adesk::Boolean bRet=Adesk::kTrue; XPoly2D poly2d; PolyConvert(*m_pDrawEnt, poly2d); if(m_nOperCode==kLinePoint || m_nOperCode==kArcPoint) { //*poly2d.Tail()=m_ptResult; } else if(m_nOperCode==kArcMidPoint) { XDirectionCurve cv; poly2d.Nth(poly2d.TotalSegments()-1, cv); XCurveSegment seg; seg = XArc(cv.StartPoint(), m_ptResult, cv.EndPoint()); if(!!seg) { if(seg.StartPoint().Distance(cv.StartPoint())>_DIST_SNAP) seg.SetBulge(-seg.GetBulge()); poly2d.SetBulge(poly2d.Length()-2, seg.GetBulge()); } } else if(m_nOperCode==kArcRadius) { XPoint ptBase, ptPrev; int numVert=m_pDrawEnt->numVerts(); m_pDrawEnt->getPointAt(numVert-1, (AcGePoint3d &)ptBase); m_pDrawEnt->getPointAt(numVert-2, (AcGePoint3d &)ptPrev); double nChordLen=ptBase.Distance2d(ptPrev); double nRadius=ptBase.Distance2d(m_ptResult); if(nChordLen<2.0*nRadius+1.0E-6) { double bulge=2.0*asin(nChordLen/2.0/nRadius); if(XLine(ptPrev, ptBase).OnWhichSide(m_ptResult)==OFFSET_LEFT) bulge = -bulge; poly2d.SetBulge(poly2d.Length()-2, bulge); } } PolyConvert(poly2d, *m_pDrawEnt); return bRet; } AcDbEntity* TPolyEdJig::entity() const { return (AcDbEntity *)m_pDrawEnt; } int DragInputPoly2d(XPoint ptStart, XPoly2D &poly2dRet) { AcDbPolyline pline; pline.addVertexAt(0, ptStart); TPolyEdJig jig(&pline); jig.SetPrompt(_T("\n直段下一点或 [弧段(A)/回退(U)]<结束>: ")); jig.SetOperCode(TPolyEdJig::kLinePoint); jig.SetKeyword(_T("A U")); while(1) { int nKeyIndex=0; int nRetCode=jig.DoIt(&nKeyIndex); if(nRetCode==RTNORM) { pline.addVertexAt(pline.numVerts(), (AcGePoint2d &)jig.GetPickPoint()); if(jig.GetOperCode()==TPolyEdJig::kArcPoint) { TPolyEdJig jig1(&pline); jig1.SetOperCode(TPolyEdJig::kArcMidPoint); jig1.SetPrompt(_T("\n点取弧上一点或 [输入半径(R)]:")); jig1.SetKeyword(_T("R")); int nKeyIdx; int nRetCode1=jig1.DoIt(&nKeyIdx); if(nRetCode1==RTKWORD) { TPolyEdJig jig2(&pline); jig2.SetOperCode(TPolyEdJig::kArcRadius); jig2.SetPrompt(_T("\n输入半径(光标位置确定弧的方向):")); jig2.DoIt(); } } //else { //直段 jig.SetPrompt(_T("\n直段下一点或 [弧段(A)/回退(U)]<结束>: ")); jig.SetOperCode(TPolyEdJig::kLinePoint); jig.SetKeyword(_T("A U")); //} } else if(nRetCode==RTKWORD) { if(jig.GetOperCode()==TPolyEdJig::kLinePoint) { if(nKeyIndex==0) { jig.SetOperCode(TPolyEdJig::kArcPoint); jig.SetPrompt(_T("\n弧段下一点或 [直段(L)/回退(U)]<结束>: ")); jig.SetKeyword(_T("L U")); } else if(nKeyIndex==1) { int numVert=pline.numVerts(); if(numVert>1) { pline.removeVertexAt(numVert-1); pline.setBulgeAt(numVert-2, 0.0); } } } else if(jig.GetOperCode()==TPolyEdJig::kArcPoint) { if(nKeyIndex==0) { jig.SetOperCode(TPolyEdJig::kLinePoint); jig.SetPrompt(_T("\n直段下一点或 [弧段(A)/回退(U)]<结束>: ")); jig.SetKeyword(_T("A U")); } else if(nKeyIndex==1) { int numVert=pline.numVerts(); if(numVert>1) { pline.removeVertexAt(numVert-1); pline.setBulgeAt(numVert-2, 0.0); } } } } else if(nRetCode==RTNONE) { break; } else if(nRetCode==RTCAN) { return RTERROR; } } int numVert=pline.numVerts(); if(numVert<2) return RTERROR; PolyConvert(pline, poly2dRet); return RTNORM; } // 输入多段线 TUTIL_IMPEXP int GetOpenPoly2D(const TCHAR *pMsg, XPoly2D &poly2d, Entity &entRet) { XString szPrompt; if(pMsg) szPrompt << pMsg; else szPrompt << _T("\n曲线起点"); szPrompt << _T("或 [点取图中曲线(P)/点取参考点(R)]<退出>:"); XPoint ptStart; int nCode; INITGET_BEG(0, _T("P R")); nCode=ads_getpoint(NULL, szPrompt, ptStart); INITGET_END(); if(nCode==RTKWORD) { XString sKeyword; VERIFY(ads_getinput(sKeyword)==RTNORM); if(sKeyword[0]==_T('R')) { XPoint ptRef; if(ads_getpoint(NULL, _T("\n输入参考点<退出>:"), ptRef)!=RTNORM) return RTERROR; if(ads_getpoint(ptRef, _T("\n曲线起点<退出>:"), ptStart)!=RTNORM) return RTERROR; ptStart=Ucs2Wcs(ptStart); nCode=DragInputPoly2d(ptStart, poly2d); } else { RBList mask(RTDXF0, _T("POLYLINE,LWPOLYLINE,LINE,ARC"), NULL); Entity ent; LAB_RESELECT: if((nCode=ent.FilterSelect(_T("\n选择一曲线(LINE/ARC/PLINE):"), mask))!=RTNORM) return RTERROR; if(ent.Is(_T("LINE")) || ent.Is(_T("ARC"))) { XCurveSegment cv(ent); poly2d.Reset(); cv.AsPoly2D(poly2d); } else { XPoly2D poly(ent); if(!!poly) { poly2d=poly; } else { adsout << _T("\n无效的选择!"); goto LAB_RESELECT; } } entRet=ent; } } else if(nCode==RTNORM) { ptStart=Ucs2Wcs(ptStart); nCode=DragInputPoly2d(ptStart, poly2d); } else { // return nCode; } return nCode; } //////////////////////////////////////////////////////////////// // 图块拖动 TBlockInsertEdJig::TBlockInsertEdJig(AcDbEntity *pDrag, XPoint ptRef) { m_pDrawEnt=pDrag; m_pBackup=(AcDbEntity *)pDrag->clone(); m_ptRef=ptRef; } // 开始执行拖动 int TBlockInsertEdJig::DoIt(int *keyIndex) { m_ptResult=m_ptRef; int nRet = TSymbEdJig::DoIt(keyIndex); return nRet; } // 反馈 AcEdJig::DragStatus TBlockInsertEdJig::GetPoint(XPoint &pt) { DragStatus stat; if(m_nOperCode==kRotate) { double nAngle=0.0; stat=acquireAngle(nAngle, m_ptRef); ads_polar(m_ptRef, nAngle, 100.0, pt); } else { stat=acquirePoint(pt); } return stat; } //以外边框方式拖制图块时，起点为基点，终点为右上角点(如:立面门窗使用这种方法) TUTIL_IMPEXP bool g_bDragBlkCtrlPoint=false;//add by whl // 更新实体数据 Adesk::Boolean TBlockInsertEdJig::update() { //ASSERT(m_pBackup->isA()==TDbBlockInsert::desc() // && m_pDrawEnt->isA()==TDbBlockInsert::desc()); Adesk::Boolean bRet=Adesk::kTrue; AcGeMatrix3d mat; if(m_nOperCode==kMove) { //m_ptRef.GetMoveMatrix(m_ptResult, mat); XVector3D vtMove=m_ptResult-m_ptRef; mat.setToTranslation(vtMove); CopyObject(*m_pBackup, *m_pDrawEnt); m_pDrawEnt->transformBy(mat); } else if(m_nOperCode==kRotate) { CopyObject(*m_pBackup, *m_pDrawEnt); XVector3D vtNormal(0,0,1); if(m_pDrawEnt->isKindOf(AcDbBlockReference::desc())) { (AcGeVector3d &)vtNormal=AcDbBlockReference::cast(m_pDrawEnt)->normal(); } double nRot=ads_angle(Wcs2Ecs(m_ptRef, vtNormal), Wcs2Ecs(m_ptResult, vtNormal)); mat.setToRotation(nRot, vtNormal, m_ptRef); m_pDrawEnt->transformBy(mat); } else if(m_nOperCode==kDragCorner) { CopyObject(*m_pBackup, *m_pDrawEnt); AcDbBlockReference *pInsert=AcDbBlockReference::cast(m_pDrawEnt); BOOL bDelete=FALSE; if(!pInsert) { pInsert=TDbMultiViewInsert::cast(m_pDrawEnt)->NewBlock(TRUE); bDelete=TRUE; } double m_nRot=pInsert->rotation(); XPoint ptCorn1=m_ptRef; XPoint ptCorn2=m_ptResult; double nAngle1=CT_std_angle(ads_angle(ptCorn1, ptCorn2)-m_nRot); double nDist=ptCorn1.Distance2d(ptCorn2); XPoint m_ptCen; Midpoint(ptCorn1, ptCorn2, m_ptCen); double m_nSizeX=nDist*fabs(cos(nAngle1)); double m_nSizeY=nDist*fabs(sin(nAngle1)); ads_matrix matRotOld, matMove, matScale, matRotNew, matTransform; double nSizeX, nSizeY, nSizeZ, nRot; XPoint ptCen, ptNewCen; XPoint ptIns; VERIFY(GetBlockRefSizeInfo(pInsert, ptIns, &nRot, ptCen, &nSizeX, &nSizeY, &nSizeZ)==RTNORM); //add by whl on 040814 for insert elev win if(g_bDragBlkCtrlPoint) { XPoint ptCtrl; GetBlcCtrlPoint(pInsert->blockTableRecord(),ptCtrl); AcGeScale3d scale1=pInsert->scaleFactors(); ptCtrl.x*=scale1[0]; ptCtrl.y*=scale1[1]; ptCen.x=ptCtrl.x/2+ptIns.x; ptCen.y=ptCtrl.y/2+ptIns.y; nSizeX=ptCtrl.x; nSizeY=ptCtrl.y; ads_matrix matRot0; ptIns.GetRotationMatrix(nRot, matRot0); ptCen.TransformBy(matRot0); } ptNewCen = m_ptCen; ptNewCen.z += nSizeZ/2.0; ptNewCen = m_ptCen; ptNewCen.z += nSizeZ/2.0; // 绕旧中心旋转-nRotOld -> 绕旧中心Scale -> 平移到新中心 -> 旋转 RotNew // or // 绕旧中心旋转-nRotOld -> 绕旧中心Scale -> 旋转 RotNew -> 平移到新中心 (Current Method) AcGeScale3d bScale = pInsert->scaleFactors(); double sx=1, sy=1, sz=1; if(fabs(nSizeX)>1.0E-6) bScale[0] *= sx = m_nSizeX/nSizeX; if(fabs(nSizeY)>1.0E-6) bScale[1] *= sy = m_nSizeY/nSizeY; //if(fabs(nSizeZ)>1.0E-6) bScale[2] *= sz = m_nSizeZ/nSizeZ; ptCen.GetRotationMatrix(-nRot, matRotOld); ptCen.GetScaleMatrix(sx, sy, sz, matScale); ptCen.GetRotationMatrix(m_nRot, matRotNew); ptCen.GetMoveMatrix(ptNewCen, matMove); MatrixMultiply(matTransform, matMove, matRotNew, matScale, matRotOld, NULL); ptIns.TransformBy(matTransform); //换算新的基点位置 if(bDelete) { delete pInsert; TDbMultiViewInsert *pMv=TDbMultiViewInsert::cast(m_pDrawEnt); ASSERT(pMv); pMv->SetLocation(ptIns); pMv->SetScaleFactors(bScale); } else { pInsert->setPosition(ptIns); pInsert->setScaleFactors(bScale); } } return bRet; } AcDbEntity* TBlockInsertEdJig::entity() const { return (AcDbEntity *)m_pDrawEnt; } static void InitPrompt(int nFlag, XString &sKeywords, XString &sKeywordNoSpace, XString &szPrompt) { int nOptFlag=IBF_ROT90|IBF_MIRLR|IBF_MIRUD|IBF_FRAME|IBF_ROTATE|IBF_ALIGN|IBF_BASEPT|IBF_RESEL; szPrompt << _T("\n点取插入点"); if(nFlag&nOptFlag) szPrompt << _T("["); BOOL bInitOption=FALSE; int nOptionArray[8]={IBF_ROT90,IBF_MIRLR,IBF_MIRUD,IBF_ALIGN,IBF_FRAME,IBF_ROTATE,IBF_BASEPT,IBF_RESEL}; const TCHAR * szOptionPrompt[8]={_T("转90(A)"), _T("左右(S)"), _T("上下(D)"), _T("对齐(F)"), _T("外框(E)"), _T("转角(R)"), _T("基点(T)"), _T("更换(C)"),}; TCHAR szKeywordArray[9]=_T("ASDFERTC"); for(int n=0;n<8;n++) { if(nFlag&nOptionArray[n]) { if(bInitOption) { szPrompt << _T("/"); sKeywords << _T(" "); } bInitOption=TRUE; szPrompt << szOptionPrompt[n]; TCHAR szTemp[2]=_T(""); szTemp[0]=szKeywordArray[n]; szTemp[1]=EOS; sKeywords << szTemp; sKeywordNoSpace << szTemp; } } if(nFlag&nOptFlag) szPrompt << _T("]"); szPrompt << _T("<退出>:"); } static void MakeInsert(BOOL bAsTInsert, const TDbBlockInsert *pInsert) { if(bAsTInsert) { AddToCurrentSpace((AcDbEntity *)pInsert->clone(), Adesk::kTrue); } else { AcDbVoidPtrArray entSet; if(pInsert->explode(entSet)==Acad::eOk && entSet.length()==1) { AcDbEntity *pEnt=(AcDbEntity *)entSet[0]; AddToCurrentSpace(pEnt, Adesk::kTrue); } } } int DragInsertBlockNew(const TCHAR *szBlock, int nFlag, AcGeScale3d scales) { XPoint ptInsert; VERIFY(xg_getvar(_T("VIEWCTR"), &ptInsert)==RTNORM); AcDbObjectId idInsert=(nFlag&IBF_TINSERT)? MakeTBlockInsert(szBlock,ptInsert, scales[0], scales[1], scales[2],Ucs2Wcs(0),0) : MakeBlockInsert(szBlock,ptInsert, scales[0], scales[1], scales[2], Ucs2Wcs(0)); if(!idInsert) return RTERROR; Entity ent; VERIFY(acdbGetAdsName(ent.name, idInsert)==Acad::eOk); OPENOBJ_BEGIN(ent, AcDb::kForRead, AcDbEntity, pEnt); ASSERT(pEnt); pEnt->draw(); OPENOBJ_END(); CWnd *pWnd=acedGetAcadFrame(); CInsertBlockDlg dlg(idInsert, pWnd); { CTemporaryResourceOverride vTemp; dlg.Create(dlg.IDD, pWnd); acedGetAcadDwgView()->SetFocus(); } int rc=RTNORM; ptInsert=Wcs2Ucs(ptInsert); while(rc==RTNORM) { rc=IDragInsertBlock(ptInsert, ent, nFlag); if(rc==RTNORM && (nFlag&IBF_MINSERT)) { XPushVar osmode(_T("OSMODE"), 0); SHads_command(RTSTR, _T(".COPY"), RTENAME, (TLong_ptr *)ent, RTSTR, _T(""), RT3DPOINT, &ptInsert,RT3DPOINT, &ptInsert, RTNONE); ent.FreeGroups(); ent.GetLast(); dlg.SetFromBlockInfo(); dlg.UpdateData(FALSE); } else if(rc==RTNIL) { AcDbEntity *pInsert=NULL; acdbOpenObject(pInsert,idInsert,AcDb::kForWrite,true); if(pInsert!=NULL) { dlg.m_pInsert=pInsert; dlg.UpdateInsert(); dlg.m_pInsert=NULL; AcDbBlockReference *pTInsert=TDbBlockInsert::cast(pInsert); if(pTInsert!=NULL) pTInsert->setPosition(ptInsert); else { TDbMultiViewInsert *pMview=TDbMultiViewInsert::cast(pInsert); if(pMview!=NULL) pMview->SetLocation(ptInsert); } pInsert->close(); rc=RTNORM; } else break; } else break; } if(::IsWindow(dlg.m_hWnd)) dlg.DestroyWindow(); return rc; } // sg delete 100311，与TchKernalGlobalFunc.h里重定义，且函数实现相同，直接调用tch_kernal中的 /* TUTIL_IMPEXP AcDbObjectId GetBlock2dFromBlock3d(AcDbObjectId idBlock) { AcDbObjectId idBlock2d; OPENOBJ_BEGIN(idBlock, AcDb::kForRead, AcDbBlockTableRecord, pBlock); if(pBlock) { resbuf *pxData = pBlock->xData(TCHXD); // 读扩展数据 if(pxData) { // RBList rbList(pxData); // Groups *group=rbList.SearchNode(1005); // if(group) { // AcDbHandle handle(pNext->resval.rstring); // pBlock->database()->getAcDbObjectId(idBlock2d, false, handle); // } resbuf *pNext = pxData->rbnext; if(pNext && pNext->restype == 1005) { AcDbHandle handle(pNext->resval.rstring); pBlock->database()->getAcDbObjectId(idBlock2d, false, handle); } ads_relrb(pxData); } } OPENOBJ_END(); return idBlock2d; } */ #define SAFE_DELETE(pEnt) \ if (NULL != pEnt) \ { \ delete pEnt; \ pEnt = NULL; \ } // Zyu add on 100819，转换成适当类型的实体 bool ConvertToProperEntity(AcDbEntity*& pEnt, bool bToACADBlock) { bool bExplode = false; // 是否需要进一步炸开 bool bIsTDbInsert = false; // 入库时是否是上华块 bool bIsOnlyInsert = false; // 入库时是单个块 // 转换指针类型 TDbBlockInsert *pBlkIns = TDbBlockInsert::cast(pEnt); // 如果为空指针，说明传入的不是上华块，直接返回 if (NULL != pBlkIns) { // 得到上华图块中包含的ACAD图块 AcDbBlockReference *pBlkRef = pBlkIns->NewBlockInsert(); // 获得块参照对应的块表记录的ID AcDbObjectId idBlkRec = pBlkRef->blockTableRecord(); // 打开块表记录，查看入库时的对象是否是单个上华图块 OPENOBJ_BEGIN(idBlkRec, AcDb::kForRead, AcDbBlockTableRecord, pBlkRec); AcDbBlockTableRecordIterator *pIterator = NULL; // 得到块表记录的遍历器 if (Acad::eOk == pBlkRec->newIterator(pIterator)) { pIterator->start(); AcDbEntity *pEntity = NULL; // 得到迭代器指向的实体 if (Acad::eOk == pIterator->getEntity(pEntity, AcDb::kForRead)) { pIterator->step(); bIsOnlyInsert = (pEntity->isKindOf(AcDbBlockReference::desc()) && pIterator->done()); // 如果该实体是一个块，并且块表记录中只有这一个实体 if (bIsOnlyInsert) { // 能够转换，说明是入库时是上华块 bIsTDbInsert = (NULL != TDbBlockInsert::cast(pEntity)); } pEntity->close(); } SAFE_DELETE(pIterator); } OPENOBJ_END(); // 要转成Acad块 if (bToACADBlock) { SAFE_DELETE(pEnt); pEnt = pBlkRef; // 如果包含的是一个Acad块，继续炸开 bExplode = (bIsOnlyInsert && !bIsTDbInsert); } // 要转成上华图块 else { // 如果包含的是一个上华块 if (bIsOnlyInsert && bIsTDbInsert) { // 对于做过非等比例拉伸的块，是不能炸开的，所以先做判断 AcDbVoidPtrArray arEnts; if (Acad::eOk == pBlkRef->explode(arEnts)) { ReleaseEntSet(arEnts); // pEnt指向新实体，并且继续炸开 SAFE_DELETE(pEnt); pEnt = pBlkRef; bExplode = true; } else { SAFE_DELETE(pBlkRef); bExplode = false; } } // 不做处理，回收内存 else { SAFE_DELETE(pBlkRef); bExplode = false; } } } return bExplode; } int DragInsertBlock(const TCHAR *szBlock, int nFlag, const AcGeScale3d &scales) { //if(!(nFlag&IBF_MULTVIEW))//不是多视图块 // return DragInsertBlockNew(szBlock,nFlag|IBF_TINSERT,scales); XPoint ptInsert; xg_getvar(_T("VIEWCTR"), ptInsert); ptInsert=Ucs2Wcs(ptInsert); AcDbObjectId idBlock=InitBlock(szBlock); if(!idBlock) return RTERROR; XVector3D vtNormal=Ucs2Wcs(XVector3D(0,0,1), TRUE); ((AcGeVector3d &)vtNormal).normalize(); PickSet ss(SS_FREE); XString sKeywords, sKeywordNoSpace, sPrompt; InitPrompt(nFlag, sKeywords, sKeywordNoSpace, sPrompt); AcDbEntity *pDragEnt=NULL; if(nFlag&IBF_MULTVIEW) { AcDbObjectId idBlock2d = GetBlock2dFromBlock3d(idBlock); if(!idBlock2d.isValid()) return RTERROR; TDbMultiViewInsert *pInsert=new TDbMultiViewInsert; pInsert->SetLocation(ptInsert); pInsert->SetBlockId(TRUE, idBlock); pInsert->SetBlockId(FALSE, idBlock2d); pInsert->SetRotation(Ucs2Wcs(0));//add by whl on 050725 pInsert->SetScaleFactors(scales); pDragEnt=pInsert; } else { XPoint ptEcsIns=Wcs2Ecs(ptInsert, vtNormal); TDbBlockInsert *pInsert=new TDbBlockInsert; pInsert->setBlockTableRecord(idBlock); pInsert->setPosition(ptEcsIns); pInsert->setScaleFactors(scales); pInsert->setRotation(ads_angle(XPoint(), Ucs2Ecs(XVector3D(1,0,0), vtNormal, TRUE))); pInsert->setNormal(vtNormal); if(g_nAcadVer>16.11) { if(g_nAcadVer<16.3||//2006 NO SP1有时会崩溃 g_nAcadVer>17.01)//2008插有color随块对象的块又会有问题，真受不了！//add by whl on 070510 { TCHAR sLayer[1024]=_T("0"); xg_getvar(_T("CLAYER"),sLayer); pInsert->setLayer(sLayer); } pInsert->setColorIndex(256); } pDragEnt=pInsert; } //if(nFlag&IBF_MULTVIEW) { // pInsert->Set2DBlockId(pInsert->_Get2DBlockId()); // pInsert->SetMultiView(TRUE); //} TBlockInsertEdJig jig(pDragEnt, ptInsert); CWnd *pWnd=acedGetAcadFrame(); CInsertBlockDlg dlg(jig.GetBackup(), pWnd); { CTemporaryResourceOverride vTemp; // Zyu add on 100819，设置是否是多视图块 dlg.m_bMultiView = (nFlag & IBF_MULTVIEW); dlg.Create(dlg.IDD, pWnd); } acedGetAcadDwgView()->SetFocus(); jig.SetPrompt(sPrompt); jig.SetKeyword(sKeywords); jig.SetOperCode(TBlockInsertEdJig::kMove); int nRet; do { int nKeyIndex=0; nRet=jig.DoIt(&nKeyIndex); ptInsert=jig.GetPickPoint(); jig.Backup(); jig.SetRefPoint(ptInsert); if(nRet==RTKWORD) { ads_printf(_T("%c%c %c"), 8,8,8); //消除回答的字符 TCHAR cKey=sKeywordNoSpace[nKeyIndex]; if(cKey==_T('A') || cKey==_T('S') || cKey==_T('D')) { if(cKey==_T('S')) { AcGeMatrix3d mat; XVector3D vt=Ucs2Wcs(XVector3D(0,1,0),TRUE); mat.setToMirroring(AcGeLine3d((AcGePoint3d &)ptInsert, (AcGeVector3d &)vt)); mat(2,2)=1; pDragEnt->transformBy(mat); } else if(cKey==_T('D')) { AcGeMatrix3d mat; XVector3D vt=Ucs2Wcs(XVector3D(1,0,0),TRUE); mat.setToMirroring(AcGeLine3d((AcGePoint3d &)ptInsert, (AcGeVector3d &)vt)); mat(2,2)=1; pDragEnt->transformBy(mat); } else if(cKey==_T('A')) { AcGeMatrix3d mat; mat.setToRotation(PI/2.0, vtNormal, ptInsert); //ptInsert.GetRotationMatrix(PI/2.0, mat); pDragEnt->transformBy(mat); } nRet=RTNORM; } else if(cKey==_T('C')) { nRet=IBF_RESEL; } else if(cKey==_T('R')) { TBlockInsertEdJig jig1(pDragEnt, ptInsert); jig1.SetPrompt(_T("\n旋转角度<0.0>:")); jig1.SetOperCode(TBlockInsertEdJig::kRotate); nRet=jig1.DoIt(); //if(nRet==RTNORM) // adsout << sPrompt; } else if(cKey==_T('T')) { int nOsMode=0; xg_getvar(_T("OSMODE"), &nOsMode); nOsMode &= ~0x4000; nOsMode |= OS_INT|OS_NEA|OS_PER|OS_END|OS_MID|OS_CEN; XPushVar vOsMode(_T("OSMODE"), nOsMode); AcDbEntity *pTempEnt=(AcDbEntity *)pDragEnt->clone(); // Zyu add on 100819，转换成合适类型的对象 ConvertToProperEntity(pTempEnt, dlg.GetBlockType() == 0); AcDbObjectId idTemp=AddToCurrentSpace(pTempEnt, Adesk::kTrue); nRet=XGetPoint(NULL, _T("\n输入插入点"), ptInsert); OPENOBJ_BEGIN(idTemp, AcDb::kForWrite, AcDbEntity, pEnt); if(pEnt) pEnt->erase(); OPENOBJ_END(); if(nRet==RTNORM) ptInsert=Ucs2Wcs(ptInsert); } else if(cKey==_T('E')) { XPoint ptCorn1, ptCorn2; nRet=XGetPoint(NULL, _T("\n第一个角点"), ptCorn1); ptCorn1=Ucs2Wcs(ptCorn1); if(nRet==RTNORM) { TBlockInsertEdJig jig1(pDragEnt, ptCorn1); jig1.SetPrompt(_T("\n另一个角点")); jig1.SetOperCode(TBlockInsertEdJig::kDragCorner); nRet=jig1.DoIt(); if(nRet==RTNORM) { // Zyu modify on 100819，转换成合适类型的对象 //AcDbObjectId idNew=AddToCurrentSpace((AcDbEntity *)pDragEnt->clone(), Adesk::kTrue); AcDbEntity *pTempEnt = (AcDbEntity *)pDragEnt->clone(); bool bExplode = ConvertToProperEntity(pTempEnt, dlg.GetBlockType() == 0); AcDbObjectId idNew=AddToCurrentSpace(pTempEnt, Adesk::kTrue); // Zyu modify on 100908，如果块需要炸开，添加到选择集 //if(!!idNew) // ss += idNew; if (idNew.isValid() && bExplode) { ss += idNew; } } } ptInsert=ptCorn1; } else if(cKey==_T('F')) { //对齐 int nOsMode=0; xg_getvar(_T("OSMODE"), &nOsMode); nOsMode &= ~0x4000; nOsMode |= OS_INT|OS_NEA|OS_PER|OS_END|OS_MID|OS_CEN; XPushVar vOsMode(_T("OSMODE"), nOsMode); AcDbEntity *pTempEnt=(AcDbEntity *)pDragEnt->clone(); // Zyu add on 100819，转换成合适类型的对象 ConvertToProperEntity(pTempEnt, dlg.GetBlockType() == 0); AcDbObjectId idTemp=AddToCurrentSpace(pTempEnt, Adesk::kTrue); XPoint pt1, pt2, qt1, qt2; if(ads_getpoint(NULL, _T("\n对齐参考点："), pt1)==RTNORM && ads_getpoint(pt1, _T("\n对齐参考轴："), pt2)==RTNORM && ads_getpoint(NULL, _T("\n对齐目标点："), qt1)==RTNORM && ads_getpoint(qt1, _T("\n对齐目标轴："), qt2)==RTNORM) { pt1=Ucs2Wcs(pt1); pt2=Ucs2Wcs(pt2); qt1=Ucs2Wcs(qt1); qt2=Ucs2Wcs(qt2); double nRot=CT_std_angle(ads_angle(qt1, qt2)-ads_angle(pt1, pt2)); ads_matrix matMov, matRot; pt1.GetMoveMatrix(qt1, matMov); qt1.GetRotationMatrix(nRot, matRot); pDragEnt->transformBy(AsAcGeMatrix3d(matMov)); pDragEnt->transformBy(AsAcGeMatrix3d(matRot)); ptInsert=qt1; // Zyu modify on 100819，转换成合适类型的对象 //AcDbObjectId idNew=AddToCurrentSpace((AcDbEntity *)pDragEnt->clone(), Adesk::kTrue); AcDbEntity *pTmpEnt = (AcDbEntity *)pDragEnt->clone(); bool bExplode = ConvertToProperEntity(pTmpEnt, dlg.GetBlockType() == 0); AcDbObjectId idNew=AddToCurrentSpace(pTmpEnt, Adesk::kTrue); // Zyu modify on 100908，如果块需要炸开，添加到选择集 //if(!!idNew) // ss += idNew; if (idNew.isValid() && bExplode) { ss += idNew; } nRet=RTNORM; } OPENOBJ_BEGIN(idTemp, AcDb::kForWrite, AcDbEntity, pEnt); if(pEnt) pEnt->erase(); OPENOBJ_END(); } } else if(nRet==RTNORM) { AcDbEntity *pNew=(AcDbEntity *)pDragEnt->clone(); // Zyu modify on 100819，转换成合适类型的对象 bool bExplode = ConvertToProperEntity(pNew, dlg.GetBlockType() == 0); AcDbObjectId idNew=AddToCurrentSpace(pNew, Adesk::kTrue); // Zyu modify on 100908，如果块需要炸开，添加到选择集 //if(!!idNew) // ss += idNew; if (idNew.isValid() && bExplode) { ss += idNew; } } jig.Backup(); jig.SetRefPoint(ptInsert); dlg.SetFromBlockInfo(); dlg.UpdateData(FALSE); } while(nRet==RTNORM && (nFlag&IBF_MINSERT)!=0); delete pDragEnt; // Zyu modify on 100908，炸开选择集内的块对象 int iLen = ss.Length(); for (int i = 0; i < iLen; i++) { TEntitySet ent = ss[(long)i]; SHacedCommand(RTSTR, _T(".EXPLODE"), RTENAME, (TLong_ptr*)ent, NULL); } if(::IsWindow(dlg.m_hWnd)) dlg.DestroyWindow(); return nRet; }