#pragma once
#include "GeArc.h"
#include "PickEntSet.h"
#include "DListStack.h"
#include "acedinputpointmonitorex.h"
#include "AcGiViewDraw.h"
#include "SymbDialog.h"
#include "AecDbDimension.h"
#include "AecDbSymbNorthThumb.h"
#include "aecDbSymbSymmetry.h"
#include "aecDbSymbSection.h"
#include "AecDbSymbModi.h"
#include "AecDbSymbCoord.h"
#include "AecDbSymbElevation.h"
#include "AecDbDrawingName.h"
#include "AecDbSymbDrawingIndex.h"
#include "AecDbSymbIndexPointer.h"
#include "AecDbSymbComposing.h"

class DimensionEdJig : public AcEdJig
{
public:
	DimensionEdJig(AecDbDimension *pDim, const TCHAR *pszPrompt, const TCHAR *pszKeyword = NULL);
	~DimensionEdJig();
	int doIt();
	virtual DragStatus sampler();
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
	void Swap();

	int GetRetCode(int *kwordId = NULL) const;
	int m_nRetCode; //返回码
	const TCHAR *m_pszPrompt; //提示信息
	const TCHAR *m_pszKeyword; //关键字
	AecDbDimension *m_pDrawEnt; //临时实体, 
	AecDbDimension *m_pTemp; //临时实体, 用于m_nFlag==3

	GeArc			m_ObjarDim;// 被标注对象
	BOOL			m_bKeyword;//是否按下关键字，玄长标注用

	ADSGePoint3d m_ptDim;
	int m_nFlag; //0--尺寸方向, 1--尺寸线位置, 2--第二个标注点, 3--其它标注点

	//add by whl on 03/08/08
	DListStack<ADSGePoint3d> ptStack;//标注点栈
	void Step();//当前点入栈
	void Undo();//撤消
	ADSGePoint3d GetLastPoint();
	bool CanUndo();//是否可撤消
	//add by lgy 20120315 设置弧长标注标记
	void SetIsArcDim();

	BOOL m_bInView;	//add by lgy 20120503	保存标注是否是在视口中绘制
	int m_nPortNum;	//视口编号
	PickEntSet m_entSet;//add by lgy 20120507 保存所有视口对象
	AcDbObjectId m_idDimNew;//新标注样式ID
	AcDbObjectId m_idDimOld;//老标注样式ID
	BOOL m_bSaveStyle;		//保存是不是设置新样式
protected:
	void FindAndRemoveSeg(ADSGePoint3d pt);//由一标注点找出对应段并且正确去除之

private:
	//add by lxb on 2011/11/22
	AcEdInputPointMonitorEx  m_cMonitor;//监视器
	bool m_bIsArcDim;	//add by lgy 20120315	弧长标注标记
};

typedef struct CptData
{
	AcGePoint2d ptCenter;

	AcGePoint2d ptTem;
}PTDATA, *pPTDATA;

class DimAngleJig :public AcEdJig
{
public:
	DimAngleJig(AecDbDimension *pDim,
		AcGeLine2d &line1, AcGeLine2d &line2, ADSGePoint3d &pt,
		TCHAR *pszPrompt, TCHAR *pszKeyword = NULL);

	~DimAngleJig();
	AcEdJig::DragStatus doIt();

protected:
	virtual AcEdJig::DragStatus sampler();
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

	static int QsortFun(const void *p1, const void *p2);//交点排序函数

private:
	AecDbDimension *m_pDim;//标注

	TCHAR *m_pszPrompt;   //提示语 
	TCHAR *m_pszKeyword;  //关键字
	AcGePoint3d m_ptLast; //记录鼠标上次位置
	AcGePoint3d m_ptCur;  //记录鼠标当前位置
	AcGeLine2d m_line1;   //成角直线1
	AcGeLine2d m_line2;   //成角直线2
	ADSGePoint3d m_ptCen;       //成角顶点

};

class TMulDimEntity : public AcDbEntity
{
public:
	TMulDimEntity() {}
	virtual ~TMulDimEntity() {}

	AecDbDimension *m_pDrawEnt;	//临时实体, 
	AecDbDimension *m_pDrawEntAll; //临时实体, 
	int m_iFlag;
	virtual Adesk::Boolean subWorldDraw(AcGiWorldDraw* mode)
	{
		assertReadEnabled();
		AcGiViewDraw dc(mode, NULL);

		m_pDrawEnt->Draw2d(dc);
		if (m_iFlag == 2 && m_pDrawEntAll != NULL)
		{
			m_pDrawEntAll->Draw2d(dc);
		}
		return Adesk::kTrue;
	}

};

class QuickDimensionJig : public AcEdJig
{
public:
	QuickDimensionJig();
	virtual ~QuickDimensionJig();
	int doIt();
	virtual DragStatus sampler();
	virtual Adesk::Boolean update();
	virtual AcDbEntity *entity() const;

	const TCHAR *m_pszKeyword; //关键字
// 	AecDbDimension *m_pDrawEnt; //临时实体, 
// 	AecDbDimension *m_pDrawEntALL;
	AecDbDimension *m_pDrawEntX; //临时实体, 
	AecDbDimension *m_pDrawEntY; //临时实体, 
	double m_dFactor;
	int m_iFlag;
	ADSGePoint3d m_ptDim;
	ADSGePoint3d m_lowPt, m_upPt;
	void SetKeyword(const TCHAR *pszKeyword);
	void SetExtents(ADSGePoint3d lowPt, ADSGePoint3d upPt);
	void SetMidPoints(AcGePoint3dArray &dimPoints);
	void SetDimType(int iFlag);
	void AddToDataBase();
	TMulDimEntity m_dimbEntity;
};

class SymbEdJig : public AcEdJig {
protected:
	int GetRetCode(int nRetCode, int *kewyIdx = NULL) const;
protected:
	//输入
	XString m_sPrompt; //提示信息
	XString m_sKeyword;

	XPoint m_ptResult;
public:
	SymbEdJig() {}
	virtual int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual BOOL IsPosChanged(XPoint ptNew) const;
	virtual DragStatus sampler();

public:
	void SetPrompt(const TCHAR *s) {
		m_sPrompt = s;
	}
	void SetKeyword(const TCHAR *k) {
		m_sKeyword = k;
	}
	XPoint GetPickPoint() const {
		return m_ptResult;
	}
};

class NorthThumbEdJig : public SymbEdJig {
public:
	enum TNorthOper { kNone = 0, kCenter = 1, kDirection = 2, };
protected:
	TNorthOper m_nOperCode;

	// I/O
	AecXDbSymbNorthThumb *m_pDrawEnt;
public:
	NorthThumbEdJig(AecXDbSymbNorthThumb *);
	virtual int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual BOOL IsPosChanged(XPoint ptNew) const;
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
public:
	void SetOperCode(NorthThumbEdJig::TNorthOper opCode) {
		m_nOperCode = opCode;
	}
};

class SymmetryEdJig : public SymbEdJig {
protected:
	// I/O
	AecXDbSymbSymmetry *m_pDrawEnt;

public:
	SymmetryEdJig(AecXDbSymbSymmetry *);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
};

class SectionEdJig : public SymbEdJig {
public:
	enum TSectionOper { kNone = 0, kSectPoint = 1, kSectPointOther = 2, kViewDirection = 3 };
protected:
	int GetRetCode(int nRetCode, int *kewyIdx = NULL) const;
protected:
	TSectionOper m_nOperCode;
	int m_iFlag2;
	//add by lgy 20120320	添加改变量控制那种方式jig剖面符号
	int m_nMode;
	CSectionDlg *m_pDlg;
	// I/O
	AecXDbSymbSection *m_pDrawEnt;
	AecXDbSymbSection m_drawEnt;

public:
	SectionEdJig(AecXDbSymbSection *);
	int DoIt(int *pKeyIndex = NULL);
	//add by lgy 20120320 设置剖面符号绘制的方式
	void SetJigMode(int nMode);
	void SetJigDlg(CSectionDlg *pDlg);	//设置与jig交互的对话框
protected:
	virtual AcEdJig::DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
public:
	void SetOperCode(SectionEdJig::TSectionOper opCode) {
		m_nOperCode = opCode;
	}
	int GetiFlag2();
};

class CloudLineJig : public SymbEdJig
{
public:
	CloudLineJig(AecXDbSymbModi *pModi, XPoint ptFirst, double dMax, double dMin);
	~CloudLineJig();

public:
	virtual int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);

protected:
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

private:
	XPoint		m_ptFirst;
	double		m_dMax;
	double		m_dMin;

	XPoly2D		m_pline;

	AecXDbSymbModi	*m_pModi;
};

class SymbCutJig : public  AcEdJig
{
public:
	SymbCutJig(const XPoint&);

	int DoIt();
	virtual DragStatus sampler();
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

public:
	//TDbSymbCut* m_pSymbCut;

protected:
	int GetRetCode(int nRetCode, int *kwordId = NULL) const;

public:
	XPoint pt0;
	XPoint pt1;
	XPoint pt2;
	XPoint pt3;
	XPoint pt4;

	int m_nRupNum;
	//XDcClip::ClipType m_ClipType;
	int mPromptCounter;

	// add by lgy 20120511，是否是双折断线
	BOOL m_bIsTwo;
};

class ArrowEdJig : public SymbEdJig
{
public:
	enum TArrowOper { kNone = 0, kLinePoint = 1, kArcPoint = 2, kArcMidPoint = 3, kArcRadius = 4 };

protected:
	TArrowOper m_nOperCode;
	AecXDbSymbArrow *m_pDrawEnt;
	BOOL m_bFirst;

public:
	ArrowEdJig(AecXDbSymbArrow *);
	virtual int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);

protected:
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

public:
	void SetOperCode(ArrowEdJig::TArrowOper opCode) { m_nOperCode = opCode; }
	TArrowOper GetOperCode() { return m_nOperCode; }
};

static CString  dAngle;  // 保存角度
static XPoint savePoint; // 保存第一点的坐标
class CoordEdJig : public SymbEdJig
{
protected:
	// I/O
	AecXDbSymbCoord *m_pDrawEnt;

public:
	CoordEdJig(AecXDbSymbCoord *);
	virtual int DoIt();
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

public:
	//  [10/19/2007 nsh]
	double	m_dFixAngle; // 得到固定的角度值
	BOOL	m_bFixAngle; // 判断时候选定了固定角度的选项
	// --end--

	XPoint	m_saveFirstPt; // sg add 120618，记忆第1点坐标，主要为了接收外面传过来的值，给savePoint赋值
};

class ElevEdJig : public SymbEdJig
{
public:
	enum TElevOper { kNone = 0, kDirection = 1, kBaseLine = 2, kLeader = 3, kMove = 4 };
	double m_dPointX;
	AcGePoint3d m_ptBase;
	double m_fBaseElev; // M

protected:
	// 输入
	ElevEdJig::TElevOper m_nOperCode;
	// I/O
	AecXDbSymbElevation *m_pDrawEnt;

public:
	ElevEdJig(AecXDbSymbElevation *);
	virtual int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);

	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
	XPoint GetDragPoint() const;
	XPoint GetBasePoint() const;

public:
	void SetOperCode(ElevEdJig::TElevOper nCode) {
		m_nOperCode = nCode;
	}
};

static double sAngle;
extern CString g_sLeadFixAngle;
extern BOOL g_bLeadFixAngle;
class LeaderEdJig : public SymbEdJig
{
public:
	enum TLeaderOper { kNone = 0, kLeader = 1, kTextLine = 2, kVertex = 3, };

	// add by cwk
	double m_dFixAngle;
	BOOL m_bFixAngle;

protected:
	// 输入
	LeaderEdJig::TLeaderOper m_nOperCode;

	// I/O
	AecXDbSymbMultiLeader *m_pDrawEnt;

public:
	LeaderEdJig(AecXDbSymbMultiLeader *);
	int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
	XPoint GetDragPoint() const;
	XPoint GetBasePoint() const;

	//add by lgy 20120206	引出标注角度固定角度不起作用
	void SetDlg(CLeaderDlg *pLeadDlg);
	CLeaderDlg *m_pDlg;
public:
	void SetOperCode(LeaderEdJig::TLeaderOper nCode)
	{
		m_nOperCode = nCode;
	}
};

// sg add 090330，引出标注，添加其他点时使用
class LeaderAddOtherPtJig : public SymbEdJig
{
public:
	AcGePoint3d	m_ptLeader;
	AcGePoint3d	m_ptFirstVertexes;
	AcDbLine	m_line;

	BOOL m_bUpdateDlg; // 兼顾对象编辑和绘制对话框，标志是否时时获取对话框上的“多点共线”
	CLeaderDlg	*m_pDlg;
	BOOL m_bAllOnLine;

	double m_nLayoutRotation;//引线平行 add by lxb on 111229
	BOOL m_bLeaderParall;  //对象编辑时，对象是否带有引线平行属性

public:
	LeaderAddOtherPtJig(CLeaderDlg *pDlg, XPoint ptStart, XPoint ptBase, double dLayoutRotation); // 绘制函数调用
	LeaderAddOtherPtJig(BOOL bAllPtsOnLine, XPoint ptStart, XPoint ptBase, double dLayoutRotation, BOOL b); // 对象编辑调用

	int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
};

class DrawingNameJig : public AcEdJig
{
public:
	DrawingNameJig(AecXDbDrawingName *pEnt);

	int start(int *pKeyIndex = NULL);
	AcDbEntity* entity() const;
	DragStatus sampler();
	Adesk::Boolean update();
	void SetPrompt(const TCHAR *pszPrompt);
	void SetKeyword(const TCHAR *pszKeyword);

private:
	const TCHAR *m_pszPrompt;	//提示信息
	const TCHAR *m_pszKeyword;	//关键字
	AecXDbDrawingName *m_pDrawEnt;	//临时实体
	AcGePoint3d m_ptIns;
};

class DrawingIndexEdJig :public AcEdJig
{
public:
	DrawingIndexEdJig(AecXDbSymbDrawingIndex *pEnt, TCHAR *pszPormat, TCHAR *pszKeyWord);
	~DrawingIndexEdJig();

	virtual AcEdJig::DragStatus sampler();
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

	AcEdJig::DragStatus doIt();
private:
	AecXDbSymbDrawingIndex *m_pEnt;
	AcGePoint3d m_ptCur;        //鼠标当前坐标
	AcGePoint3d m_ptLast;
	TCHAR *m_pszPormat;         //提示语
	TCHAR *m_pszKeyWord;
};

class IndexPointerEdJig : public SymbEdJig
{
public:
	enum TIndexOper {
		kNone = 0,
		kSourceExtent = 1,
		kTurnPoint = 2,
		kTextBasePoint = 3,
		kViewDirection = 4,
		kAddedTurn = 5,			// 剖切线中多出来的那个点
		kMoreCuts = 6,				// 其他剖切点
	};

	double m_dFixAngle;		// add by cwk on 060706，固定角度值
	bool m_bFixAngle;

protected:
	TIndexOper m_nOperCode;

	AecXDbSymbIndexPointer *m_pDrawEnt; // I/O
	AcDbCircle m_drawEnt;

	CArray<XLine, XLine&> m_arCutAdded;
	XLine m_cutCurrDrag;

	CIndexDimDlg *m_pDlg; // 

public:
	IndexPointerEdJig(AecXDbSymbIndexPointer *);
	int DoIt(int *pKeyIndex = NULL);
	void AttachDlg(CIndexDimDlg* pDlg) { m_pDlg = pDlg; }
	// 根据索引初始化索引线
	void InitCutLine();

protected:
	virtual AcEdJig::DragStatus GetPoint(XPoint &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;

public:
	void SetOperCode(IndexPointerEdJig::TIndexOper opCode) {
		m_nOperCode = opCode;
	}
};

class ComposingEdJig : public SymbEdJig {
public:
	enum TComposingOper { kNone = 0, kTextLine = 1, kTurnPoint = 2, };
protected:
	TComposingOper m_nOperCode;

	// I/O
	AecXDbSymbComposing *m_pDrawEnt;
public:
	ComposingEdJig(AecXDbSymbComposing *);
	virtual int DoIt(int *pKeyIndex = NULL);
	DragStatus GetPoint(XPoint &pt);
protected:
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
public:
	void SetOperCode(ComposingEdJig::TComposingOper opCode) {
		m_nOperCode = opCode;
	}
};

class ComposingAddOtherPtJig : public SymbEdJig
{
public:
	ComposingAddOtherPtJig(XPoint ptStart, XPoint ptBase);

public:
	AcGePoint3d	m_ptLeader;			// 引线的拐点
	AcGePoint3d	m_ptFirstVertexes;  // 引线的端点
	AcDbLine	m_line;				// 引线

public:
	int DoIt(int *pKeyIndex = NULL);
	virtual DragStatus GetPoint(AcGePoint3d &pt);
	virtual Adesk::Boolean update();
	virtual AcDbEntity* entity() const;
};