#pragma once
#include "PipePrototype.h"
#include "DbPipeLabel.h"

class CHDbEquipment : public CDbPipeNode, public CLabelStyle
{
public:
	ACRX_DECLARE_MEMBERS(CHDbEquipment);

private:
	static const Adesk::UInt8 g_nVersion;

public:
	CHDbEquipment();
	
protected:
	AcDbHardPointerId m_idBlock2d; // 二维图块
	AcDbHardPointerId m_idBlock3d; // 三维图块

	XPoint m_ptLocation; // 设备基点
	XVector3D m_vtDirection; // 设备方向

	TPipeSys::ModelType m_modelType; // 模型类型
	double	m_dSysAngle; // 系统图的角度
	Adesk::UInt8 m_nMirror;	// 图块镜像

	double	m_dSizeX, m_dSizeY, m_dSizeZ; // 设备的长宽高

	XString m_sLabel; // 标注内容
	BOOL m_bDrawLabel; // 是否显示标注
	XPoint m_ptLabel, m_ptLabelOut;	// 标注点，引注点
	AcDbHardPointerId m_idLabelLayer;// 标注文字图层


public: // Set、Get函数
	void SetBlock2d(const AcDbObjectId &id) { // 二维图块
		assertWriteEnabled();
		m_idBlock2d = id;
	}
	AcDbObjectId GetBlock2d() const {
		return m_idBlock2d;
	}
	void SetBlock3d(const AcDbObjectId &id) { // 三维图块
		assertWriteEnabled();
		m_idBlock3d = id;
	}
	AcDbObjectId GetBlock3d() const {
		return m_idBlock3d;
	}

	void SetLocation(const XPoint &pt); // 设备基点
	virtual XPoint GetLocation() const { return m_ptLocation; }

	void SetDirection(const XVector3D &vt, BOOL bApply = TRUE); // 设备方向
	XVector3D GetDirection() const {
		return m_vtDirection;
	}

	void SetAngle(double dAngle, BOOL bApply = TRUE) { // bApply：应用到接口、标注
		SetDirection(XVector3D(cos(dAngle), sin(dAngle), 0), bApply);
	}
	double GetAngle() const {
		return ads_angle(XPoint(), m_vtDirection);
	}


	void SetLabelLocation(const XPoint &pt) { // 标注位置
		assertWriteEnabled();
		if (m_ptLabelOut == m_ptLabel)
			m_ptLabelOut = pt;
		m_ptLabel = pt;
	}
	XPoint GetLabelLocation() const {
		return m_ptLabel;
	}
	
	void SetLabelOut(const XPoint &pt) { // 引出位置
		assertWriteEnabled();
		m_ptLabelOut = pt;
	}
	XPoint GetLabelOut() const {
		return m_ptLabelOut;
	}

	void EnableDrawLabel(BOOL bFlag) {
		assertWriteEnabled();
		m_bDrawLabel = bFlag;
	}
	BOOL IsDrawLabel() const {
		return m_bDrawLabel;
	}

	void SetLabelLayer(const AcDbObjectId& id) {
		assertWriteEnabled();
		m_idLabelLayer = id;
	}
	AcDbObjectId GetLabelLayer() const {
		return m_idLabelLayer;
	}

	void SetLabel(const TCHAR* sLabel) {
		assertWriteEnabled();
		m_sLabel = sLabel;
	}
	const TCHAR* GetLabel() const {
		return (const TCHAR*)m_sLabel;
	}


	// 显示比例(bApply:应用到接口、标注)
	void SetSize(double x, double y, double z, BOOL bApply = TRUE);
	void GetSize(double &x, double &y, double &z) const {
		 x = m_dSizeX;
		 y = m_dSizeY;
		 z = m_dSizeZ;
	}

	void SetSizeX(double x,BOOL bApply = TRUE) {
		SetSize(x, GetSizeY(), GetSizeZ(), bApply);
	}
	double GetSizeX() const {
		return m_dSizeX; }

	void SetSizeY(double y,BOOL bApply = TRUE) {
		SetSize(GetSizeX(), y, GetSizeZ(), bApply);
	}
	double GetSizeY() const {
		return m_dSizeY; }

	void SetSizeZ(double z, BOOL bApply = TRUE) {
		SetSize(GetSizeX(), GetSizeY(), z, bApply);
	}
	double GetSizeZ() const {
		return m_dSizeZ; }

	// 设备(图块)X、Y轴的镜像，X轴方向为m_vtDirection方向
	void MirrorByX(BOOL bFlag = TRUE);
	BOOL IsMirrorByX() const {
		return (m_nMirror&MIRROR_XAXIS)!=0;
	}

	void MirrorByY(BOOL bFlag = TRUE);
	BOOL IsMirrorByY() const {
		return (m_nMirror&MIRROR_YAXIS)!=0;
	}

	BOOL IsSysType() const { // 是否系统图
		return m_modelType==TPipeSys::kSystem;
	}
	void SetModelType(TPipeSys::ModelType modelType) { // 模型图或原理图或系统图
		assertWriteEnabled();
		m_modelType = modelType;
	}
	TPipeSys::ModelType GetModelType() const { // 模型图或原理图或系统图
		return m_modelType;
	}

	void SetSysAngle(double dAngle) { // 系统图角度
		assertWriteEnabled();
		m_dSysAngle = dAngle;
	}
	double GetSysAngle() const {
		return m_dSysAngle;
	}


public: // 有关Interface的函数
	// 新建接口(sName：接口名称，存储于m_sSysLabel)
	void AddInterface(XString sName, const XPoint& ptLoc, const XVector3D& vt);
	CPipeInterface* FindInterface(XString sName); // 查找
	BOOL RemoveInterface(XString sName); // 删除指定名称的接口

	
public:
	AcGeScale3d GetInsert2dScale() const; // 图块插入比例
	AcGeScale3d GetInsert3dScale() const;

	BOOL IsLabelValid() const { return CLabelStyle::IsValid(); }
	BOOL IsOutLabel() const { // 是否是引出标注
		return m_ptLabel!=m_ptLabelOut;
	}


public: // Override TDbPipeNode
	// 对st类型的接口进行重新连接
	virtual void UpdateLinkage(const XPoint &ptAt, TPipeSys::SysType st, 
		const DList<AcDbObjectId> &idPipes);
	
	// 判断节点是否可以连接管段. nPos: 0--start; 1--end
	virtual BOOL CanLinkSide(const AcDbObjectId &idPipe, int nPos) const; 
	virtual BOOL IsDrawBlock() const { return TRUE; }


public: // Override TDbEntity
	virtual Acad::ErrorStatus Draw2d(AcGiDraw &dc) const;
	virtual Acad::ErrorStatus Draw3d(AcGiDraw &dc) const;

	virtual void CopyPropertiesFrom(AcDbEntity *pSrc, unsigned gMatchFlag);
	virtual Acad::ErrorStatus GetGripText(int idx, CString &cs) const;
	virtual Acad::ErrorStatus GetExtents(XPoint &ptLow, XPoint &ptUp) const;
	virtual void GetTips(DList<ObjInfoUnit> &) const; // 取动态属性显示数据
	//virtual Acad::ErrorStatus subGetClassID(CLSID* pClsid) const;

	virtual int GetGripNumber() const;
	virtual int GetStretchNumber() const;

public:	// Override AcDbEntity
	virtual Acad::ErrorStatus dwgInFields(AcDbDwgFiler*);
	virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const;
	virtual Acad::ErrorStatus dxfInFields(AcDbDxfFiler*);
	virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const;
	
	Acad::ErrorStatus subGetOsnapPoints(AcDb::OsnapMode	osnapMode,
									INT_PTR				gsSelectionMark,
									const AcGePoint3d&	ptPick,
									const AcGePoint3d&	lastPoint,
									const AcGeMatrix3d&	viewXform,
									AcGePoint3dArray&	snapPoints,
									AcDbIntArray&		geomIds) const;
	virtual Acad::ErrorStatus subGetGripPoints(AcGePoint3dArray&     gripPoints,
									AcDbIntArray&  osnapModes,
									AcDbIntArray&  geomIds) const;
	virtual Acad::ErrorStatus   subGetStretchPoints(AcGePoint3dArray & stretchPoints) const;
	virtual  Acad::ErrorStatus subMoveGripPointsAt(const AcDbIntArray& indices,
									const AcGeVector3d& offset);
	virtual  Acad::ErrorStatus subMoveStretchPointsAt(const AcDbIntArray& indices,
									const AcGeVector3d& offset);

	virtual Acad::ErrorStatus subTransformBy(const AcGeMatrix3d& xform);

private:
	Acad::ErrorStatus _ExplodeOrDraw2d(AcGiDraw &dc, BOOL bZEqual0 = TRUE) const;
	Acad::ErrorStatus DrawSystem(AcGiDraw &dc, BOOL bZEqual0 = TRUE) const;
	Acad::ErrorStatus DrawLabelText(AcGiDraw &dc) const;

	Acad::ErrorStatus MoveGSPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset);
};