#include "stdafx.h"
#include "GLBJDlg.h"
#include "AecDbX3dGroup.h"
#include "AecDbEarthWorm.h"
#include "KTCADUtilityEx.h"
#include "AcDbX3dSolid.h"
#include "uitools.h"
#include "AecDbObjXDataMap.h"
#include "CCSYDlg.h"
#include "AecDbShEarthWorm.h"
#include "AecDb3dRoadAxisLine.h"
#include "coreTools.h"


static const Adesk::UInt16 kColorByBlock   = 0;
static const Adesk::UInt16 kRed            = 1;
static const Adesk::UInt16 kYellow         = 2;
static const Adesk::UInt16 kGreen          = 3;
static const Adesk::UInt16 kCyan           = 4;
static const Adesk::UInt16 kBlue           = 5;
static const Adesk::UInt16 kMagenta        = 6;
static const Adesk::UInt16 kWhite          = 7;
static const Adesk::UInt16 kColorByLayer   = 256;

extern Acad::ErrorStatus AddToModelSpace(AcDbEntity* pEnt,AcDbDatabase* pDb ,bool bClose );
extern void SplitStrintToArray(LPCTSTR pszDescr,CStringArray& arInfo,TCHAR tcSpace);
extern CString IDCreate();

static void FreeBuffer(AcDbVoidPtrArray& arTextPtrs)
{
	AcDbEntity* pEnt = NULL;
	while (arTextPtrs.length() > 0)
	{
		pEnt = (AcDbEntity*)arTextPtrs.first();
		arTextPtrs.removeFirst();
		DELETE_PTR(pEnt);
	}
}

IMPLEMENT_DYNAMIC(CGLBJDlg, CDialog)

CGLBJDlg::CGLBJDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CGLBJDlg::IDD, pParent)
	, m_dCurRoomW(0)
	, m_dWAdd(2)//增加
	, m_dOpenL(2)//开口
	, m_dB(5)
	, m_dAngle(90)
	, m_bAllRoom(FALSE)
	, m_nPos(0)
	, m_dA2(90)
	, m_dZOff(0)
	, m_dTAdd(0.2)
	, m_dHoleH(0.4)
	, m_dH(0)
{
	m_bIsAddRec = false;
	m_dLen = 0.0;
	m_idxRoom = -1;
	m_pRectCell = new AcDbPolyline;
	m_pRectCell->addVertexAt(0, AcGePoint2d::kOrigin);
	m_pRectCell->addVertexAt(1, AcGePoint2d(1, 0));
	m_pRectCell->addVertexAt(1, AcGePoint2d(1, 1));
	m_pRectCell->addVertexAt(1, AcGePoint2d(0, 1));
	m_pRectCell->setColorIndex(6);
	m_pRectCell->setClosed(Adesk::kTrue);
	m_pRectCell->setConstantWidth(0.1);
	m_pGLBJXDataMap = NULL;

	UIDataCache::Read(_T("%d%d%d%d%d%i%i%s%i%d%d"), _T("CGLBJDlg")
		, &m_dCurRoomW, &m_dWAdd, &m_dOpenL, &m_dB , &m_dAngle
		, &m_bAllRoom, &m_idxRoom
		, &m_sCrossSectionScr
		, &m_nPos
		, &m_dLen
		, &m_dA2);

	m_curSection.pReg = NULL;
	m_curSection.pt.set(0,0,0);
	m_sCrossSectionScr = _T("");
	m_sAddtionScr = _T("");
	m_idxRoom = 0;
	m_pRegionRoom = NULL;
}

CGLBJDlg::~CGLBJDlg()
{
}

void CGLBJDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Text(pDX, IDC_EDIT1, m_dCurRoomW);
	DDX_Text(pDX, IDC_EDIT2, m_dWAdd);
	DDX_Text(pDX, IDC_EDIT10, m_dOpenL);
	DDX_Text(pDX, IDC_EDIT34, m_dB);
	DDX_Text(pDX, IDC_EDIT3, m_dAngle);
	DDX_Check(pDX, IDC_CHECK1, m_bAllRoom);
	DDX_Control(pDX, IDC_EDIT10, m_wndEditL);
	DDX_Control(pDX, IDC_EDIT34, m_wndEditB);
	DDX_Control(pDX, IDC_EDIT3, m_wndEditA);
	DDX_Radio(pDX, IDC_RADIO1, m_nPos);
	DDX_Text(pDX, IDC_EDIT4, m_dA2);
	DDX_Control(pDX, IDOK, m_wndBtOk);
	DDX_Control(pDX, IDC_BUTTON2, m_wndBtAdd);
	DDX_Control(pDX, IDC_COMBO1, m_wndCombo);
	DDX_Control(pDX, IDC_BUTTON11, m_wndBtUpdate);
	DDX_Control(pDX, IDC_EDIT4, m_wndEditA2);
	DDX_Control(pDX, IDC_LIST1, m_wndRecordList);
	DDX_Control(pDX, IDC_BUTTON3, m_wndDelRecBt);
	DDX_Control(pDX, IDC_STATIC_SP, m_wndStaticSP);
	DDX_Control(pDX, IDCANCEL, m_wndBtCan);
	DDX_Text(pDX, IDC_EDIT6, m_dZOff);
	DDX_Text(pDX, IDC_EDIT35, m_dTAdd);
	DDX_Text(pDX, IDC_EDIT36, m_dHoleH);
	DDX_Text(pDX, IDC_EDITH5, m_dH);
	DDX_Control(pDX, IDC_EDITH5, m_wndH5);
}

BEGIN_MESSAGE_MAP(CGLBJDlg, CDialog)
	ON_BN_CLICKED(IDC_CHECK1, &CGLBJDlg::OnBnClickedCheck1)
	ON_BN_CLICKED(IDOK, &CGLBJDlg::OnBnClickedOk)
	ON_MESSAGE(WM_VIEW_LBUTTONDOWN, &CGLBJDlg::OnViewLButtonDown)
	ON_BN_CLICKED(IDC_BUTTON2, &CGLBJDlg::OnBnClickedButton2)
	ON_BN_CLICKED(IDC_BUTTON1, &CGLBJDlg::OnBnClickedButton1)
	ON_BN_CLICKED(IDC_BUTTON11, &CGLBJDlg::OnBnClickedButton11)
	ON_NOTIFY(NM_CLICK, IDC_LIST1, &CGLBJDlg::OnNMClickList1)
	ON_BN_CLICKED(IDC_BUTTON3, &CGLBJDlg::OnBnClickedButton3)
END_MESSAGE_MAP()

BOOL CGLBJDlg::OnInitDialog()
{
	CDialog::OnInitDialog();

	// 子类化控件对象
	if (!m_wndViewCtrl.SubclassDlgItem(IDC_STATIC_EW, this))
	{
		// 错误时，结束对话框
		EndDialog(IDCANCEL);
		return FALSE;
	}

	m_ImageList.Create(IDB_BITMAP2,16,1,RGB(0, 255, 255));
	m_wndRecordList.SetImageList(&m_ImageList,LVSIL_SMALL);

	m_wndRecordList.InsertColumn(0,_T("记录"),LVCFMT_LEFT,300,300);
	m_wndRecordList.SetExtendedStyle(LVS_EX_FULLROWSELECT);

	if (!m_bIsAddRec)
	{
		CRect rc;
		m_wndRecordList.GetWindowRect(&rc);
		ScreenToClient(rc);

		m_wndBtAdd.EnableWindow(FALSE);
		m_wndBtAdd.ShowWindow(SW_HIDE);

		m_wndCombo.EnableWindow(FALSE);
		m_wndCombo.ShowWindow(SW_HIDE);

		m_wndBtUpdate.EnableWindow(FALSE);
		m_wndBtUpdate.ShowWindow(SW_HIDE);

		m_wndRecordList.EnableWindow(FALSE);
		m_wndRecordList.ShowWindow(SW_HIDE);

		m_wndDelRecBt.EnableWindow(FALSE);
		m_wndDelRecBt.ShowWindow(SW_HIDE);

		GetDlgItem(IDC_STATIC_V)->EnableWindow(FALSE);
		GetDlgItem(IDC_STATIC_V)->ShowWindow(SW_HIDE);

		GetDlgItem(IDC_EDIT6)->EnableWindow(FALSE);
		GetDlgItem(IDC_EDIT6)->ShowWindow(SW_HIDE);

		GetDlgItem(IDC_STATIC_VM)->EnableWindow(FALSE);
		GetDlgItem(IDC_STATIC_VM)->ShowWindow(SW_HIDE);

		AdjustWindowsNoAddRec(rc);
	}
	else
	{
		ReloadFromXDataMap();
	}

	if (m_dA2 < 1.e-3)
		m_dA2 = m_dAngle;

	ShowEarthWorm();

	if (m_idxRoom > -1)
	{
		HitEarthWorm(m_idxRoom);
	}

	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		m_wndH5.SetReadOnly(FALSE);
	}

	UpdateData(FALSE);

	return TRUE;
}

void CGLBJDlg::AdjustWindowsNoAddRec(CRect& rcA)
{
	CRect rc;
	m_wndStaticSP.GetWindowRect(&rc);
	ScreenToClient(&rc);
	
	int nOffset = rcA.top - rc.top;
	rc.OffsetRect(0,nOffset);
	m_wndStaticSP.MoveWindow(rc);

	m_wndDelRecBt.GetWindowRect(&rc);
	ScreenToClient(&rc);
	rc.OffsetRect(0,nOffset);
	m_wndDelRecBt.MoveWindow(rc);

	m_wndBtCan.GetWindowRect(&rc);
	ScreenToClient(rc);
	rc.OffsetRect(0,nOffset);
	m_wndBtCan.MoveWindow(rc);

	m_wndBtOk.GetWindowRect(&rc);
	ScreenToClient(rc);
	rc.OffsetRect(0,nOffset);
	m_wndBtOk.MoveWindow(rc);

 	GetWindowRect(&rc);
	rc.bottom += nOffset;
 	MoveWindow(&rc);
}

void CGLBJDlg::ReloadFromXDataMap()
{
	if (m_pGLBJXDataMap != NULL)
	{
		for (int i = 0;i < 10;i++)
		{
			AecDbObjXDataMap rcXDataMap;
			if ( !m_pGLBJXDataMap->GetAt(_T("CGLBJDlg"),i,rcXDataMap) )
			{
				break;
			}

			GLBJRecord rc;
			//memset(&rc,0,sizeof(GLBJRecord));
			rcXDataMap.GetAt(_T("m_dCurRoomW"),rc.m_dCurRoomW);
			rcXDataMap.GetAt(_T("m_dWAdd"),rc.m_dWAdd);
			rcXDataMap.GetAt(_T("m_dOpenL"),rc.m_dOpenL);
			rcXDataMap.GetAt(_T("m_dB"),rc.m_dB);
			rcXDataMap.GetAt(_T("m_dAngle"),rc.m_dAngle);
			rcXDataMap.GetAt(_T("m_dA2"),rc.m_dA2);
			rcXDataMap.GetAt(_T("m_bAllRoom"),rc.m_bAllRoom);
			rcXDataMap.GetAt(_T("m_idxRoom"),rc.m_idxRoom);
			rcXDataMap.GetAt(_T("m_nPos"),rc.m_nPos);
			rcXDataMap.GetAt(_T("m_dZOff"),rc.m_dZOff);
			rcXDataMap.GetAt(_T("m_dTAdd"),rc.m_dTAdd);
			rc.m_nIndex = i;
			
			CString sScr = _T("");
			rcXDataMap.GetAt(_T("m_sCrossSectionScr"),sScr);
			rc.szCrossSectionScr = sScr;

			rcXDataMap.GetAt(_T("m_dLen"),rc.m_dLen);

			CString sRecord,sPos;
			sPos = rc.m_nPos == 0 ? _T("舱室向左侧变径") : _T("舱室向右侧变径");
			sRecord.Format(_T("记录[ 第%d舱室 %s]"), rc.m_idxRoom + 1,sPos);
			//m_wndCombo.AddString(sRecord);

			m_wndRecordList.InsertItem(m_wndRecordList.GetItemCount(),sRecord,0);

			m_arRecord.append(rc);
		}
	}
}

void CGLBJDlg::ShowEarthWorm()
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		ShowShEarthWorm();
		return;
	}

	m_wndViewCtrl.clearAll();
	m_wndViewCtrl.init(true);
	m_wndViewCtrl.SetOrbitFlag(OBF_PAN | OBF_ZOOM | OBF_COTE);

	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0f);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	//总高度
	m_dH = arDatas.first().y;
	m_dH += 2 * arDatas.last().x;

	AcGeLineSeg3d ln;
	AcGePoint3d pt2(1000.0,0,0);
	ln.set(AcGePoint3d::kOrigin,pt2);

	AcDbRegion* pEWRegion = worm.CreateSectionRegion(ln,eType,arDatas);
	if (pEWRegion != NULL)
	{
		AcDbExtents exts;
		pEWRegion->getGeomExtents(exts);

		AcGeMatrix3d xform;
		xform.setToScaling(0.95);
		pEWRegion->transformBy(xform);

		m_wndViewCtrl.InitFromCurrentView2D(exts,true);

		AcDbVoidPtrArray arr;
		int rooms = worm.CreateSectionRoomRegion(ln, eType, arDatas, arr);

		AcDbEntity* pEnt = NULL;
		AcDbVoidPtrArray arr2;
		worm.CreateSectionRoomAddition(ln,eType,arr2);
		for (int i = 0; i < arr2.length(); i++)
		{
			pEnt = (AcDbEntity*)arr2.at(i);
			m_wndViewCtrl.Add(pEnt);
		}

		m_wndViewCtrl.Add(pEWRegion);
		m_wndViewCtrl.view()->invalidate();

		m_wndViewCtrl.Invalidate();
		m_wndViewCtrl.RedrawWindow();
	}
}

void CGLBJDlg::ShowShEarthWorm()
{
	//1.截面
	CString sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.sat");

	AcDbVoidPtrArray arBodyPtrs;
	if ( Acad::eOk == AcDbBody::acisIn(sFullPath,arBodyPtrs) )
	{
		if (arBodyPtrs.length() > 0)
		{
			AcDbEntity* pEnt = (AcDbEntity*)arBodyPtrs.first();
			AcDbRegion* pRegion = AcDbRegion::cast(pEnt);
			if (pRegion != NULL)
			{
				m_curSection.pReg = pRegion;

				AcDbExtents ext;
				pRegion->getGeomExtents(ext);
				m_dH = ext.maxPoint().y - ext.minPoint().y;
			}

			if (m_curSection.pReg != NULL)
			{
				ExtractRegionRooms();
				ShowEwSection();
			}
		}
	}

	//2.壁厚
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.ext");

	CString sLine;
	CStdioFile file;
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		file.ReadString(sLine);
		file.Close();

		sLine.TrimRight(_T('\n'));
		CStringArray arInf;
		SplitStrintToArray(sLine,arInf,_T(','));

		if (arInf.GetSize() >= 6)
		{
			m_curSection.pt.set(_ttof(arInf.GetAt(0)),_ttof(arInf.GetAt(1)),0.0);
			m_curSection.dThick[0] = _ttof(arInf.GetAt(2));
			m_curSection.dThick[1] = _ttof(arInf.GetAt(3));
			m_curSection.dThick[2] = _ttof(arInf.GetAt(4));
			m_curSection.dThick[3] = _ttof(arInf.GetAt(5));

			m_dHoleH = AS_MUNIT(m_curSection.dThick[0]);
		}
	}

	//3.名称
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.nam");

	CString sIndex,sName;
	AcDbText* pText = NULL;
	AcGePoint3d ptIns;

	CStringArray arInf;
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		sLine = _T("");
		while(file.ReadString(sLine))
		{
			sLine.TrimRight(_T('\n'));
			arInf.RemoveAll();
			SplitStrintToArray(sLine,arInf,_T(','));

			if (arInf.GetSize() >= 4)
			{
				sIndex = arInf.GetAt(0);
				sName = arInf.GetAt(1);
				m_mapIndexToName.SetAt(sIndex,sName);
			}
		}
		file.Close();
	}

	ExtractRegionRooms();

	//4.显示附件
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.adt");
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		sLine = _T("");
		file.ReadString(sLine);
		sLine.TrimRight(_T('\n'));

		m_sAddtionScr = sLine;

		m_mapAddtion.RemoveAll();
		ExtrAddtionToMap();

		file.Close();
	}
	ShowAddtion();
	ShowRoomName();

	UpdateData(FALSE);
	UpdateWindow();
}

void CGLBJDlg::ExtrAddtionToMap( )
{
	m_mapAddtion.RemoveAll();
	int nPos = m_sAddtionScr.Find(_T("EXT:"));
	if (nPos != -1)
	{
		//EXT:
		if (nPos + 4 < m_sAddtionScr.GetLength() )
		{
			CString sName;
			CString sExt = m_sAddtionScr.Mid(nPos + 4);
			//<><><><><><>.....
			CString sScript,sScriptT,sScript2,sScriptNewVer;
			CString sKey,sOld;

			int nSta = 0,nPos2 = 0,nRoomIndex = 0,nLRPos = 0,nNo = 1;
			nPos = sExt.Find(_T('<'),nSta);
			while(nPos != -1)
			{
				nPos2 = sExt.Find(_T('>'),nPos + 1);
				if (nPos2 == -1)
					break;

				//..<***>...
				sScript = sExt.Mid(nPos + 1,nPos2 - nPos - 1);

				if (sScript.Find( EW_HOLDER ) != -1)
				{
					//HOLDER:房间|左右位置|层数|垂直间隙|水平间隙|距顶D|长度|宽度|厚度|材料|用途|偏移=(,,,)|编号
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_HOLDER);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 12)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						nLRPos = _ttoi(arInf.GetAt(1));

						if (arInf.GetSize() > 12)
						{
							nNo = _ttoi(arInf.GetAt(12));
						}
						else//旧版本
						{
							static int nNum = 1;
							nNo = nNum++;

							sOld.Format(_T("|%d"),nNo);
							sScriptNewVer =sScript + sOld;
							m_sAddtionScr.Replace(sScript,sScriptNewVer);
							sScript = sScriptNewVer;
						}

						sKey.Format(_T("%d-%d-%d-HOLDER"),nRoomIndex,nLRPos,nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_BOSS) != -1)
				{
					//<BOSS:房间|左右位置|侧间隙|水平间隙|宽|高|长|直径|用途>
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_BOSS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 9)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						if (arInf.GetSize() > 16)
							nLRPos = _ttoi(arInf.GetAt(16));

						sKey.Format(_T("%d-%d-BOSS"),nRoomIndex,nLRPos);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find( EW_HANGER ) != -1)
				{
					//HANGER:房间|层数|垂直间隙|水平间隙|左侧距离|距顶D|长度|宽度|厚度|材料|用途|偏移(,,,)
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_HANGER);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-HANGER"),nRoomIndex,0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_RINGS) != -1)
				{
					//RINGS:房间|半径|长度|位置|材料|用途
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_RINGS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 9)
					{
						nNo = _ttoi(arInf.GetAt(8));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 7)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-RINGS"),nRoomIndex,0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_LAMPS) != -1)
				{
					//LAMPS:房间|长度|宽度|厚度|左侧定位|纵向间距|瓦数|名称|型好|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_LAMPS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 12)
					{
						nNo = _ttoi(arInf.GetAt(11));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-LAMPS"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_FIREET) != -1)
				{

					//FIREET:房间|安装方式|安装位置|X直径L|Y直径H|上间隙TSP|下间隙DSP|填充量|工作温度|性能|型号|名称|类别|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_FIREET);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 16)
					{
						nNo = _ttoi(arInf.GetAt(15));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 13)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nSetup = _ttoi(arInf.GetAt(1));
						int nHSetup = _ttoi(arInf.GetAt(2));

						CString sTemp;
						sTemp.Format(_T("1%d%d"),nSetup,nHSetup);

						sKey.Format(_T("%d-%s-%d-FIREET"), nRoomIndex, sTemp, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_GUTTERWAY) != -1)
				{
					sKey.Format(_T("%d-%d-GUTTERWAY"), 0, 0);

					sScript2.Format(_T("<%s>"),sScript);
					m_mapAddtion.SetAt(sKey,sScript);
				}
				else if (sScript.Find(EW_FIREDOOR) != -1)
				{
					//FIREDOOR:房间|宽|高|位置|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_FIREDOOR);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 8)
					{
						nNo = _ttoi(arInf.GetAt(7));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 5)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-FIREDOOR"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_SECURITY) != -1)
				{
					//SECURITY:房间|大径|小径|高度|定位|间距|名称|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_SECURITY);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 11)
					{
						nNo = _ttoi(arInf.GetAt(10));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 9)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-SECURITY"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_DRAFAN) != -1)
				{
					//DRAFAN:房间|外径|长度|吊高|间距|风量|功率|机号|名称|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_DRAFAN);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-DRAFAN"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_GASALARM) != -1)
				{
					//GASALARM:房间|位置|高度|长|宽|厚|间距|名称|等级|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_GASALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						nLRPos = _ttoi(arInf.GetAt(1));

						sKey.Format(_T("%d-%d-%d-GASALARM"), nRoomIndex, nLRPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if(sScript.Find(EW_ROOMSLAB) != -1)
				{
					//ROOMSLAB: 房间|位置方向|距离|子舱宽|板厚度|偏移x|偏移y|编号
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_ROOMSLAB);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 8)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						CString sNo = arInf.GetAt(7);

						sKey.Format(_T("%d-%s-ROOMSLAB"), nRoomIndex, sNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_SMOKALARM) != -1)
				{
					//SMOKALARM:房间|位置|间距|外径|高度|名称|编号|规格|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_SMOKALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 11)
					{
						nNo = _ttoi(arInf.GetAt(10));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-SMOKALARM"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_TEMPALARM) != -1)
				{
					//TEMPALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|编号|规格|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_TEMPALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));

						sKey.Format(_T("%d-%d-%d-TEMPALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_COALARM) != -1)
				{
					//COALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|浓度|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_COALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 12)
					{
						nNo = _ttoi(arInf.GetAt(11));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));
						sKey.Format(_T("%d-%d-%d-COALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_OXALARM) != -1)
				{
					//OXALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|采样方式|测量精度|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_OXALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));
						sKey.Format(_T("%d-%d-%d-OXALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_ROOMNAME) != -1)
				{
					//ROOMNAME:房间|中心x|中心y|名称  -->x,y放大100倍
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_ROOMNAME);
					sScriptT.TrimLeft(_T(':'));

					//判断是否分舱
					//double dCenX = (pt[0].x + pt[2].x) / 2.0;
					//double dCenY = (pt[0].y + pt[2].y) / 2.0;
					//CString sKey,sVal;
					//sKey.Format(_T("%d|%d|%d|ROOMNAME"), nRoomIndex, (int)( 100.0 * dCenX ),(int)(100.0 * dCenY) );//放大100倍
					//sVal.Format(_T("<ROOMNAME:%d|%d|%d|%s>"),nRoomIndex,(int)( 100.0 * dCenX ),(int)(100.0 * dCenY),m_sRoomName);
					//m_mapAddtion.SetAt(sKey,sVal);

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 4)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nCenX = _ttoi(arInf.GetAt(1));
						int nCenY = _ttoi(arInf.GetAt(2));
						sName = arInf.GetAt(3);

						sKey.Format(_T("%d|%d|%d|ROOMNAME"),nRoomIndex,nCenX,nCenY);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
						m_mapIndexToName.SetAt(arInf.GetAt(0),sName);
					}
				}
				else if (sScript.Find(EW_CHARMNO) != -1)
				{
					//盾构没有倒角
				}

				nSta += sScript.GetLength();
				nPos = sExt.Find(_T('<'),nSta);
			}
		}
	}
}

void CGLBJDlg::ShowEwSection()
{
	if (m_curSection.pReg != NULL)
	{
		m_arDrawBuffer.removeAll();
		m_wndViewCtrl.clearAll();
		m_wndViewCtrl.init(true);
		m_wndViewCtrl.SetOrbitFlag(OBF_PAN | OBF_ZOOM | OBF_COTE);

		AcDbExtents exts;
		m_curSection.pReg->getGeomExtents(exts);
		m_wndViewCtrl.InitFromCurrentView2D(exts,true);

		m_wndViewCtrl.Add(m_curSection.pReg);
		m_arDrawBuffer.append(m_curSection.pReg);

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.Invalidate();
		m_wndViewCtrl.RedrawWindow();
	}	
}

void CGLBJDlg::FormatAddtionScr()
{
	m_sAddtionScr = _T("");
	CString sExt = _T("EXT:"),sKey,sExtVal;
	for (POSITION ps = m_mapAddtion.GetStartPosition();ps != NULL;)
	{
		m_mapAddtion.GetNextAssoc(ps,sKey,sExtVal);
		sExt += sExtVal;
	}
	if (sExt.CompareNoCase(_T("EXT:")) != 0)
	{
		m_sAddtionScr += sExt;
	}
}

void CGLBJDlg::ShowAddtion()
{
	//合成脚本
	FormatAddtionScr();

	if (!m_sAddtionScr.IsEmpty())
	{
		AecDbShEarthWorm shWorm;

		AcGePoint3d ptEnd(100,0,0);
		AcDbLine ln(AcGePoint3d(0,0,0),ptEnd);

		AecDb3dRoadAxisLine* pRoadLn = new AecDb3dRoadAxisLine;
		pRoadLn->AppendCurveSeg(&ln);

		shWorm.GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
		shWorm.SetSection(m_curSection.pReg,m_curSection.pt);
		shWorm.SetBaseCurve(pRoadLn);
		shWorm.SetAddtionScr(m_sAddtionScr);

		AcDbVoidPtrArray arCurPtrs;
		shWorm.GetAddtionSection(arCurPtrs);

		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < arCurPtrs.length();i++)
		{
			pEnt = (AcDbEntity*)arCurPtrs.at(i);
			pView->add(pEnt, pModel);
			m_arDrawBuffer.append(pEnt);
		}

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();	
	}
}


void CGLBJDlg::ShowRoomName()
{
	CString sKey,sName;
	AcDbRegion* pRegion = NULL;
	AcDbText* pText = NULL;

	//延着整体圆排序
	double             perimeter;
	double             area;
	AcGePoint2d        centroid;
	double             momInertia[2];
	double             prodInertia;
	double             prinMoments[2];
	AcGeVector2d       prinAxes[2];
	double             radiiGyration[2];
	AcGePoint2d        extentsLow;
	AcGePoint2d        extentsHigh;

	AcGePoint3d ptIns;
	for (int i = 0;i < m_arRegionRooms.length();i++)
	{
		pRegion = (AcDbRegion*)m_arRegionRooms.at(i);

		pRegion->getAreaProp(AcGePoint3d::kOrigin,AcGeVector3d::kXAxis,AcGeVector3d::kYAxis,
			perimeter,
			area,
			centroid,
			momInertia,
			prodInertia,
			prinMoments,
			prinAxes,
			radiiGyration,
			extentsLow,
			extentsHigh);

		sKey.Format(_T("%d"),i);
		ptIns.set(centroid.x,centroid.y,0.0);

		if (m_mapIndexToName.Lookup(sKey,sName))
		{
			pText = NULL;
			if (m_mapIndexToDbText.Lookup(sKey,(void*&)pText))
			{
				pText->setPosition(ptIns);
				pText->setTextString(sName);
			}
			else
			{
				ptIns.set(centroid.x,centroid.y,0.0);
				pText = new AcDbText(ptIns,sName,acdbCurDwg()->textstyle(),0.15,0.0);
				pText->setHeight(.15);
				pText->setColorIndex(1);
				pText->setTextStyle(acdbCurDwg()->textstyle());
				pText->setHorizontalMode(AcDb::kTextLeft);
				m_mapIndexToDbText.SetAt(sKey,pText);
			}

			if (pText != NULL)
			{
				m_wndViewCtrl.view()->erase(pText);
				m_wndViewCtrl.Add(pText);

				if (m_arDrawBuffer.find(pText) == -1)
					m_arDrawBuffer.append(pText);
			}
		}
	}
	m_wndViewCtrl.view()->invalidate();
	m_wndViewCtrl.Invalidate();
	m_wndViewCtrl.RedrawWindow();
}

void CGLBJDlg::ExtractRegionRooms()
{
	if (m_curSection.pReg != NULL)
	{
		AecDbShEarthWorm::ExtractRegionRooms(m_arRegionRooms,m_curSection.pReg);
	}
}


LRESULT CGLBJDlg::OnViewLButtonDown(WPARAM wp, LPARAM lp)
{
	UpdateData();

	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		return OnViewShEwLButtonDown(wp,lp);
	}

	AcGePoint3d* pPt = (AcGePoint3d*)lp;
	pPt->z = 0.0;

	m_idxRoom = - 1;
	m_dCurRoomW = 0.0;

	//判断 点落在 room 内
	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	AcGeLineSeg3d ln;
	AcGePoint3d pt2(1000.0, 0, 0);
	ln.set(AcGePoint3d::kOrigin, pt2);

	AcGePoint3d ptGe[4];
	AcDbVoidPtrArray arRegPtrs;
	int nRooms = worm.CreateSectionRoomRegion(ln, eType, arDatas, arRegPtrs);
	if (nRooms > 0)
	{
		AcDbRegion* pReg = NULL;
		for (int i = 0; i < arRegPtrs.length(); i++)
		{
			pReg = (AcDbRegion*)arRegPtrs.at(i);
			if (pReg != NULL)
			{
				AcDbExtents ext;
				pReg->getGeomExtents(ext);

				ptGe[0] = ext.minPoint();
				ptGe[1] = ptGe[0];
				ptGe[1].x = ext.maxPoint().x;
				ptGe[2] = ext.maxPoint();
				ptGe[3] = ptGe[0];
				ptGe[3].y = ext.maxPoint().y;

				if (KTCADUtilityEx::IsPointInBoundary(*pPt, ptGe[0], ptGe[2]))
				{
					m_idxRoom = i;
					m_dCurRoomW = ptGe[0].distanceTo(ptGe[1]);

					AcGsView* pView = m_wndViewCtrl.view();
					AcGsModel* pModel = m_wndViewCtrl.model();
					if (pView != NULL)
					{
						if (m_pRectCell != NULL)
							pView->erase(m_pRectCell);
					}

					if (m_pRectCell != NULL)
					{
						for (int i = 0; i < 4; i++)
						{
							m_pRectCell->setPointAt(i, ptGe[i].convert2d(AcGePlane::kXYPlane));
						}
					}

					if (pView != NULL)
					{
						pView->add(m_pRectCell, pModel);
					}
					break;
				}
			}
		}

		if (m_idxRoom == -1)
		{
			m_pRectCell->setPointAt(0, AcGePoint2d::kOrigin);
			m_pRectCell->setPointAt(1, AcGePoint2d(1, 0));
			m_pRectCell->setPointAt(2, AcGePoint2d(1, 1));
			m_pRectCell->setPointAt(3, AcGePoint2d(0, 1));
		}

		FreeBuffer(arRegPtrs);

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();

		UpdateData(FALSE);
	}
	return 0L;
}


void CGLBJDlg::OnBnClickedCheck1()
{
	UpdateData();
	
	m_wndEditL.EnableWindow(!m_bAllRoom);
	m_wndEditB.EnableWindow(!m_bAllRoom);
	m_wndEditA.EnableWindow(!m_bAllRoom);
	m_wndEditA2.EnableWindow(!m_bAllRoom);
}

void CGLBJDlg::OnBnClickedOk()
{
	UpdateData();

	if (!m_bIsAddRec)
	{
		if (m_dAngle - 90.0 > 1.e-10)
		{
			AfxMessageBox(_T("底角必须小于等于90度!且大于0"));
			return;
		}

		if (m_dA2 - 90.0 > 1.e-10)
		{
			AfxMessageBox(_T("底角必须小于等于90度!且大于0"));
			return;
		}

		if (m_idxRoom == -1)
		{
			AfxMessageBox(_T("请选择要变径的舱室!"));
			return;
		}

		if ( m_dWAdd < 1.e-10)
		{
			AfxMessageBox(_T("宽度增量太小!必须大于0.01米!"));
			return;
		}

		double dX = m_dOpenL - m_dWAdd * cos(m_dAngle * PI / 180.0) / sin(m_dAngle * PI / 180.0) - m_dWAdd * cos(m_dA2 * PI / 180.0) / sin(m_dA2 * PI / 180.0);
		if (dX < 0.5)
		{
			CString sTemp;
			sTemp.Format(_T("在 %g %g 度的情况下,计算出L 尺寸太小!"),m_dAngle,m_dA2);
			AfxMessageBox(sTemp);
			return;
		}

		UIDataCache::Write(_T("%d%d%d%d%d%i%i%s%i%d%d"), _T("CGLBJDlg")
			, &m_dCurRoomW, &m_dWAdd, &m_dOpenL, &m_dB , &m_dAngle
			, &m_bAllRoom , &m_idxRoom
			, &m_sCrossSectionScr
			, &m_nPos
			, &m_dLen
			, &m_dA2);
	}
	OnOK();
}

int CGLBJDlg::GetX3dSolidRecs(AecDbX3dGroup*& pGroup)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		return GetX3dSolidRecsShEw(pGroup);
	}

	if (pGroup != NULL)
	{
		pGroup->RemoveAll3dSolidRec();
	}
	else
	{
		pGroup = new AecDbX3dGroup;
	}

	//_T("RECT:3900x3600|2900x3600|400x300|EXT:...");//EXT为扩充字段
	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(0.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	//外壁厚,内隔壁厚
	double dOutW = 0.0,dIntW = 0.0;
	if (arDatas.length() > 0)
	{
		dOutW = arDatas.last().x;
		dIntW = arDatas.last().y;
	}

	//总高度
	double dHeight = arDatas.first().y;
	dHeight += 2 * arDatas.last().x;

	//底部壁厚增加
	double dBomAdd = worm.GetBomThickAdd();
	double dTopAdd = worm.GetTopThickAdd();

	double dLRAdd = 0.0,dLAdd = 0.0,dRAdd = 0.0,dTAdd = 0.0;
	int nLRPos = worm.GetLeftOrRightThickAdd(dLRAdd);
	if (nLRPos == 0)
	{
		dLAdd = dLRAdd;
	}
	if (nLRPos == 1)
	{
		dRAdd = dLRAdd;
	}

	double dCharm = worm.GetChamferInter();

	//总宽度
	double dWidth = 0.0;
	for (int i = 0;i < arDatas.length()-1;i++)
	{
		dWidth += arDatas.at(i).x;
	}

	dWidth += (arDatas.length() - 2) * dIntW;
	dWidth += dOutW * 2.0;

	AcArray<ERoom> arRooms;
	ERoom room;
	AcGePoint2d ptThick;
	AcGeLineSeg3d ln(AcGePoint3d::kOrigin,AcGePoint3d(10.0,0.0,0));
	worm.GetSectionRoomsTo(ln,arRooms,ptThick);

	room = arRooms.at(m_idxRoom);

	AcGePoint3d ptOrg;
	AcGeVector3d vtZ;
	X3dSolidRec rec;
	dTAdd = m_dTAdd;
	double dTLAdd = dTAdd;

	AcDbX3dSolid* pXSolid = NULL;
	if (m_bAllRoom)//整体
	{
		int nDir = (m_nPos == 0 ) ? 1 : -1;

		//取侧墙中心
		ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
		ptOrg.y += nDir * ( (m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 );
		ptOrg.x = m_dLen / 2.0;
		ptOrg.z = 0.0;
		ptOrg.z += m_dZOff;
		ptOrg.z -= 0.5 * dBomAdd;
		vtZ = nDir * AcGeVector3d::kYAxis;

		if ( (m_idxRoom == 0 && m_nPos == 0 ) ||
			 (m_idxRoom == arRooms.length() - 1 && m_nPos == 1) )//左外/右外
		{
			//原地挖掉
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2.0 * dOutW, dOutW);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);

			//ptOrg -= vtZ * (dOutW * 0.5 + dBomAdd);
			ptOrg.z += 0.5 * dBomAdd;
			ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

			if (m_idxRoom == 0)
			{
				dTAdd += dLAdd;
			}
			else if (m_idxRoom == arRooms.length() - 1)
			{
				dTAdd += dRAdd;
			}

			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen + 2 * dTAdd,dHeight + dBomAdd + dTopAdd,m_dWAdd + dOutW + dTAdd,PI / 2.0);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolUnite;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);

			pXSolid = new AcDbX3dSolid;
			//ptOrg.z += 0.5 * dBomAdd;
			ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
			pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen,dHeight - 2 * dOutW,m_dWAdd,PI / 2.0);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);
		}
		else//内部
		{
			//原地挖掉
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen + 2 * dTAdd,dHeight - 2 * dOutW, dIntW + dTAdd);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);

			//创建一新的
			ptOrg += vtZ * m_dWAdd;
			pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2 * dOutW, dIntW);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolUnite;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);
		}
	}
	else//局部
	{
		int nDir = (m_nPos == 0 ) ? 1 : -1;

		//取侧墙中心
		ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
		ptOrg.y += nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 );
		ptOrg.x = m_dB + m_dOpenL * 0.5;
		ptOrg.z = 0.0;//
		ptOrg.z += m_dZOff;
		ptOrg.z -= 0.5 * dBomAdd;
		
		vtZ = nDir * AcGeVector3d::kYAxis;

		double dB = ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW : dIntW );
		double dT = dB;

		//内部原地挖掉
		pXSolid = new AcDbX3dSolid;
		pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dOpenL,dHeight - 2 * dOutW, dB);
		rec.pXSolid = pXSolid;
		rec.bType = AcDb::kBoolSubtract;
		_tcscpy(rec.szLockId,IDCreate());
		pGroup->AddX3dSolidRec(rec);

		double dAng = m_dAngle * PI / 180.0;
		double dAng2 = m_dA2 * PI / 180.0;

		if (m_nPos == 0)
			dB /= sin(dAng2);
		else
			dB /= sin(dAng);

		if (m_idxRoom == 0)
		{
			dTAdd += dLAdd;
		}
		else if (m_idxRoom == arRooms.length() - 1)
		{
			dTAdd += dRAdd;
		}
		dTLAdd = dTAdd;

		if (m_nPos == 0)
			dTLAdd /= sin(dAng2);
		else
			dTLAdd /= sin(dAng);

		//外
		pXSolid = new AcDbX3dSolid;
		ptOrg.y -= nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 );
		double dRoomH = room.ptGe[0].distanceTo(room.ptGe[1]);

		double dH = dHeight;//( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1 ) ? dHeight : dHeight - 2.0 * dOutW;

		if (fabs(m_dAngle - m_dA2) < 1.e-3)
		{
			ptOrg.z += 0.5 * dBomAdd;
			ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

			pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd ,dAng);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolUnite;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);

			//挖去 四方台 LxWxHxAng
			pXSolid = new AcDbX3dSolid;
			//ptOrg.z += 0.5 * dBomAdd;
			ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
			pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL,dH - dOutW * 2.0,m_dWAdd,dAng);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);
		}
		else
		{
			ptOrg.z += 0.5 * dBomAdd;
			ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

			pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd,dAng,dAng2);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolUnite;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);

			//挖去
			pXSolid = new AcDbX3dSolid;
			ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);

			pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL,dH - dOutW * 2.0 ,m_dWAdd,dAng,dAng2);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);
		}
	}

	pGroup->SetOrgPoint( ptOrg );
	pGroup->SetAxis(X,AcGeVector3d::kXAxis);
	pGroup->SetAxis(Y,AcGeVector3d::kYAxis);
	pGroup->SetAxis(Z,AcGeVector3d::kZAxis);

	//序列化BIM数据
	pGroup->GetSpecialtyData()->SetAt(_T("m_dCurRoomW"),m_dCurRoomW);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dWAdd"),m_dWAdd);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dOpenL"),m_dOpenL);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dB"),m_dB);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dAngle"),m_dAngle);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dA2"),m_dA2);
	pGroup->GetSpecialtyData()->SetAt(_T("m_idxRoom"),m_idxRoom);
	pGroup->GetSpecialtyData()->SetAt(_T("m_nPos"),m_nPos);
	pGroup->GetSpecialtyData()->SetAt(_T("m_sCrossSectionScr"),m_sCrossSectionScr);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dLen"),m_dLen);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dZOff"),m_dZOff);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dTAdd"),m_dTAdd);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dHoleH"),m_dHoleH);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dH"),m_dH);

	return TRUE;
}

int CGLBJDlg::GetX3dSolidRecsShEw(AecDbX3dGroup*& pGroup)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		if (pGroup != NULL)
		{
			pGroup->RemoveAll3dSolidRec();
		}
		else
		{
			pGroup = new AecDbX3dGroup;
		}

		AecDbShEarthWorm dbEW;
		AcGePoint3d ptSta(0,0,0);
		AcGePoint3d ptEnd(10,0,0);
		AcDbLine ln(ptSta,ptEnd);

		AecDb3dRoadAxisLine* pRoadLn = new AecDb3dRoadAxisLine;
		pRoadLn->AppendCurveSeg(&ln);

		STSection* pSection = GetShEwSection();
		if (pSection == NULL )
		{
			return 0;
		}

		dbEW.GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
		dbEW.SetSection(pSection->pReg, pSection->pt);
		dbEW.SetBaseCurve(pRoadLn);
		dbEW.GetSpecialtyData()->SetAt(KEY_ADDTIONSCR,pSection->sAddtionScr);
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT1,AS_MUNIT(pSection->dThick[0]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT2,AS_MUNIT(pSection->dThick[1]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT4,AS_MUNIT(pSection->dThick[2]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT5,AS_MUNIT(pSection->dThick[3]));

		delete pSection->pReg;
		pSection->pReg = NULL;
		delete pSection;
		delete pRoadLn;

		//外壁厚,内隔壁厚
		double dOutW = 0.0,dIntW = 0.0;
		dOutW = AS_MUNIT(pSection->dThick[0]);
		dIntW = AS_MUNIT(pSection->dThick[1]);

		if (dOutW < m_dHoleH)
			dOutW = m_dHoleH;

		double dSideAdd(.0);
		double dR = 0.0;
		double dL = 0.0;

		AcGePoint2d ptrODtTop,ptrODtBom,ptODt;
		dbEW.GetODAndID(ptrODtTop,ptrODtBom);
		dbEW.GetODAndThick(ptODt);

		//总高度
		double dHeight = m_dH;

		//总宽度
		double dWidth = ptODt.x;

		//底部壁厚增加
		double dBomAdd = 0.0;
		double dTopAdd = 0.0;

		double dLRAdd = 0.0,dLAdd = 0.0,dRAdd = 0.0,dTAdd = 0.0;

		AcArray<ERoom> arRooms;
		ERoom room;
		AcGePoint2d ptThick;
		AcGeLineSeg3d ln3d(ptSta,ptEnd);
		dbEW.GetSectionRoomsTo(ln3d,arRooms,ptThick);

		if (m_idxRoom < 0)
		{
			AfxMessageBox(_T("没有选择舱室,请选择舱室!"));
			return FALSE;
		}
		room = arRooms.at(m_idxRoom);

		AcGePoint3d ptOrg;
		AcGeVector3d vtZ;
		X3dSolidRec rec;
		dTAdd = m_dTAdd;
		double dTLAdd = dTAdd;

		AcDbX3dSolid* pXSolid = NULL;
		if (m_bAllRoom)//整体
		{
			int nDir = (m_nPos == 0 ) ? 1 : -1;

			//取侧墙中心
			ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
			ptOrg.y += nDir * ( (m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 );
			ptOrg.x = m_dLen / 2.0;
			ptOrg.z = 0.0;
			ptOrg.z += m_dZOff;
			ptOrg.z -= 0.5 * dBomAdd;
			vtZ = nDir * AcGeVector3d::kYAxis;

			if ( (m_idxRoom == 0 && m_nPos == 0 ) ||
				(m_idxRoom == arRooms.length() - 1 && m_nPos == 1) )//左外/右外
			{
				//原地挖掉
				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2.0 * dOutW, dOutW);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);

				//ptOrg -= vtZ * (dOutW * 0.5 + dBomAdd);
				ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

				if (m_idxRoom == 0)
				{
					dTAdd += dLAdd;
				}
				else if (m_idxRoom == arRooms.length() - 1)
				{
					dTAdd += dRAdd;
				}

				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen + 2 * dTAdd,dHeight + dBomAdd + dTopAdd,m_dWAdd + dOutW + dTAdd,PI / 2.0);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);

				pXSolid = new AcDbX3dSolid;
				//ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen,dHeight - 2 * dOutW,m_dWAdd,PI / 2.0);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);
			}
			else//内部
			{
				//原地挖掉
				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen + 2 * dTAdd,dHeight - 2 * dOutW, dIntW + dTAdd);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);

				//创建一新的
				ptOrg += vtZ * m_dWAdd;
				pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2 * dOutW, dIntW);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);
			}
		}
		else//局部
		{
			int nDir = (m_nPos == 0 ) ? 1 : -1;

			//取侧墙中心
			ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
			ptOrg.y += nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 );
			ptOrg.x = m_dB + m_dOpenL * 0.5;
			ptOrg.z = 0.0;//
			ptOrg.z += m_dZOff;
			ptOrg.z -= 0.5 * dBomAdd;

			vtZ = nDir * AcGeVector3d::kYAxis;

			double dB = ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW : dIntW );
			double dT = dB;

			//内部原地挖掉
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dOpenL,dHeight - 2 * dOutW, dB);
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			pGroup->AddX3dSolidRec(rec);

			double dAng = m_dAngle * PI / 180.0;
			double dAng2 = m_dA2 * PI / 180.0;

			if (m_nPos == 0)
				dB /= sin(dAng2);
			else
				dB /= sin(dAng);

			if (m_idxRoom == 0)
			{
				dTAdd += dLAdd;
			}
			else if (m_idxRoom == arRooms.length() - 1)
			{
				dTAdd += dRAdd;
			}
			dTLAdd = dTAdd;

			if (m_nPos == 0)
				dTLAdd /= sin(dAng2);
			else
				dTLAdd /= sin(dAng);

			//外
			pXSolid = new AcDbX3dSolid;
			ptOrg.y -= nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 );
			double dRoomH = room.ptGe[0].distanceTo(room.ptGe[1]);

			double dH = dHeight;//( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1 ) ? dHeight : dHeight - 2.0 * dOutW;

			if (fabs(m_dAngle - m_dA2) < 1.e-3)
			{
				ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd ,dAng);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);

				//挖去 四方台 LxWxHxAng
				pXSolid = new AcDbX3dSolid;
				//ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL,dH - dOutW * 2.0,m_dWAdd,dAng);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);
			}
			else
			{
				ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

				pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd,dAng,dAng2);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);

				//挖去
				pXSolid = new AcDbX3dSolid;
				ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);

				pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL,dH - dOutW * 2.0 ,m_dWAdd,dAng,dAng2);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);
			}
		}

		pGroup->SetOrgPoint( ptOrg );
		pGroup->SetAxis(X,AcGeVector3d::kXAxis);
		pGroup->SetAxis(Y,AcGeVector3d::kYAxis);
		pGroup->SetAxis(Z,AcGeVector3d::kZAxis);

		//序列化BIM数据
		pGroup->GetSpecialtyData()->SetAt(_T("m_dCurRoomW"),m_dCurRoomW);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dWAdd"),m_dWAdd);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dOpenL"),m_dOpenL);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dB"),m_dB);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dAngle"),m_dAngle);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dA2"),m_dA2);
		pGroup->GetSpecialtyData()->SetAt(_T("m_idxRoom"),m_idxRoom);
		pGroup->GetSpecialtyData()->SetAt(_T("m_nPos"),m_nPos);
		pGroup->GetSpecialtyData()->SetAt(_T("m_sCrossSectionScr"),m_sCrossSectionScr);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dLen"),m_dLen);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dZOff"),m_dZOff);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dTAdd"),m_dTAdd);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dHoleH"),m_dHoleH);
		pGroup->GetSpecialtyData()->SetAt(_T("m_dH"),m_dH);
	}
	return TRUE;
}

//管廊段变径
int CGLBJDlg::GetX3dSolidRecs(AecDbX3dGroup*& pGroup,const AcGePoint3d& ptFr,const AcGeVector3d& vtDir)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		return GetX3dSolidRecsShEw(pGroup,ptFr,vtDir);
	}

	if (pGroup != NULL)
	{
		pGroup->RemoveAll3dSolidRec();

		for (int i = 0;i < 100;i++)
		{
			if ( !pGroup->GetSpecialtyData()->RemoveAt(_T("CGLBJDlg"),i) )
			{
				break;
			}
		}
	}
	else
	{
		pGroup = new AecDbX3dGroup;
	}

	//_T("RECT:3900x3600|2900x3600|400x300|EXT:...");//EXT为扩充字段
	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(0.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	//外壁厚,内隔壁厚
	double dOutW = 0.0,dIntW = 0.0;
	if (arDatas.length() > 0)
	{
		dOutW = arDatas.last().x;
		dIntW = arDatas.last().y;
	}

	//总高度
	double dHeight = arDatas.first().y;
	dHeight += 2 * arDatas.last().x;

	//底部壁厚增加
	double dBomAdd = worm.GetBomThickAdd();
	double dTopAdd = worm.GetTopThickAdd();

	double dLRAdd = 0.0,dLAdd = 0.0,dRAdd = 0.0,dTAdd = 0.0;
	int nLRPos = worm.GetLeftOrRightThickAdd(dLRAdd);
	if (nLRPos == 0)
	{
		dLAdd = dLRAdd;
	}
	if (nLRPos == 1)
	{
		dRAdd = dLRAdd;
	}

	//总宽度
	double dWidth = 0.0;
	for (int i = 0;i < arDatas.length()-1;i++)
	{
		dWidth += arDatas.at(i).x;
	}

	dWidth += (arDatas.length() - 2) * dIntW;
	dWidth += dOutW * 2.0;

	AcArray<ERoom> arRooms;
	ERoom room;
	AcGePoint2d ptThick;
	AcGeLineSeg3d ln(ptFr,ptFr + 10.0 * vtDir);
	worm.GetSectionRoomsTo(ln,arRooms,ptThick);

	AcGeVector3d vtX = vtDir;
	vtX.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

	if (fabs(vtX.x) < 1.e-6)
		vtX.x = 0.0;

	if (fabs(vtX.y) < 1.e-6)
		vtX.y = 0.0;

	CString sIndex;
	for (int n = 0; n < m_arRecord.length();n++)
	{
		GLBJRecord& rc = m_arRecord.at(n);

		m_dCurRoomW = rc.m_dCurRoomW;
		m_dWAdd = rc.m_dWAdd;
		m_dOpenL = rc.m_dOpenL;
		m_dB = rc.m_dB;
		m_dAngle = rc.m_dAngle;
		m_dA2 = rc.m_dA2;
		m_bAllRoom = rc.m_bAllRoom;
		m_idxRoom = rc.m_idxRoom;
		m_sCrossSectionScr = rc.szCrossSectionScr;
		m_nPos = rc.m_nPos;
		m_dLen = rc.m_dLen;
		m_dZOff = rc.m_dZOff;
		m_dTAdd = rc.m_dTAdd;

		room = arRooms.at(m_idxRoom);

		AcGePoint3d ptOrg = ptFr;
		AcGeVector3d vtZ;
		X3dSolidRec rec;
		dTAdd = m_dTAdd;
		double dTLAdd = dTAdd;

		AcDbX3dSolid* pXSolid = NULL;
		if (m_bAllRoom)//整体
		{
			int nDir = (m_nPos == 0 ) ? -1 : 1;

			//取侧墙中心
			ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
			ptOrg += ( nDir * ( (m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 ) ) * vtX;
			ptOrg += ( m_dLen / 2.0 ) * vtDir;
			ptOrg.z = 0.0;
			ptOrg.z += m_dZOff;
			ptOrg.z -= 0.5 * dBomAdd;
			vtZ = nDir * vtX;

			if ( (m_idxRoom == 0 && m_nPos == 0 ) ||
				(m_idxRoom == arRooms.length() - 1 && m_nPos == 1) )//左外/右外
			{
				//原地挖掉
				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2.0 * dOutW, dOutW);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);

				ptOrg -= vtZ * dOutW * 0.5;
				ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen + 2 * m_dTAdd,dHeight + dBomAdd + dTopAdd,m_dWAdd + dOutW + m_dTAdd,PI / 2.0);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);

				pXSolid = new AcDbX3dSolid;
				ptOrg += vtZ * m_dWAdd;
				ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen,dHeight - 2 * dOutW,m_dWAdd,PI / 2.0);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				rec.pXSolid->SetGSMarkerID(n);
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);
			}
			else//内部
			{
				//原地挖掉
				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen + 2 * m_dTAdd,dHeight - 2 * dOutW, dIntW + m_dTAdd);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);

				//创建一新的
				ptOrg += vtZ * m_dWAdd;
				pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2 * dOutW, dIntW);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				rec.pXSolid->SetGSMarkerID(n);
				_tcscpy(rec.szLockId,IDCreate());
				pGroup->AddX3dSolidRec(rec);
			}
		}
		else//局部
		{
			int nDir = (m_nPos == 0 ) ? 1 : -1;

			//取侧墙中心
			ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
			ptOrg += ( nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 ) ) * vtX;
			ptOrg += ( m_dB + m_dOpenL * 0.5 ) * vtDir;
			ptOrg.z = 0.0;//中心
			ptOrg.z += m_dZOff;
			ptOrg.z -= 0.5 * dBomAdd;
			vtZ = nDir * vtX;

			double dB = ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW : dIntW );
			double dT = dB;

			//内部原地挖掉
			pXSolid = new AcDbX3dSolid;
			pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dOpenL,dHeight - 2 * dOutW, dB );
			rec.pXSolid = pXSolid;
			rec.bType = AcDb::kBoolSubtract;
			_tcscpy(rec.szLockId,IDCreate());
			rec.pXSolid->SetGSMarkerID(n);
			pGroup->AddX3dSolidRec(rec);

			double dAng = m_dAngle * PI / 180.0;
			double dAng2 = m_dA2 * PI / 180.0;

			if (m_nPos == 0)
				dB /= sin(dAng2);
			else
				dB /= sin(dAng);


			if (m_idxRoom == 0)
			{
				dTAdd += dLAdd;
			}
			else if (m_idxRoom == arRooms.length() - 1)
			{
				dTAdd += dRAdd;
			}

			dTLAdd = dTAdd;

			if (m_nPos == 0)
				dTLAdd /= sin(dAng2);
			else
				dTLAdd /= sin(dAng);

			double dB2 = ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW : dIntW );

			//外
			pXSolid = new AcDbX3dSolid;
			ptOrg -= ( nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 ) ) * vtX;
			double dRoomH = room.ptGe[0].distanceTo(room.ptGe[1]);

			double dH = dHeight;//( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1 ) ? dHeight : dHeight - 2.0 * dOutW;

			if (fabs(m_dAngle - m_dA2) < 1.e-3)
			{
				ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd,dAng);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);

				//AcAxDocLock lock;
				//AcDb3dSolid* pSolidT = pXSolid->GetDraw3dSolid();
				//pSolidT->setColorIndex(kRed);
				//AddToModelSpace(pSolidT,NULL,true);

				//挖去
				pXSolid = new AcDbX3dSolid;
				//ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
				pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL,dH - dOutW * 2.0 ,m_dWAdd,dAng);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);

				//pSolidT = pXSolid->GetDraw3dSolid();
				//pSolidT->setColorIndex(kRed);
				//AddToModelSpace(pSolidT,NULL,true);

			}
			else
			{
				ptOrg.z += 0.5 * dBomAdd;
				ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

				pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd,dAng,dAng2);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolUnite;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);

				//挖去
				pXSolid = new AcDbX3dSolid;
				//ptOrg += vtZ * m_dWAdd;
				ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);

				pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL,dH - dOutW * 2.0 ,m_dWAdd,dAng,dAng2);
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);
			}
		}

		AecDbObjXDataMap rcXDataMap;
		rcXDataMap.SetAt(_T("m_dCurRoomW"),rc.m_dCurRoomW);
		rcXDataMap.SetAt(_T("m_dWAdd"),rc.m_dWAdd);
		rcXDataMap.SetAt(_T("m_dOpenL"),rc.m_dOpenL);
		rcXDataMap.SetAt(_T("m_dB"),rc.m_dB);
		rcXDataMap.SetAt(_T("m_dAngle"),rc.m_dAngle);
		rcXDataMap.SetAt(_T("m_dA2"),rc.m_dA2);
		rcXDataMap.SetAt(_T("m_bAllRoom"),rc.m_bAllRoom);
		rcXDataMap.SetAt(_T("m_idxRoom"),rc.m_idxRoom);
		rcXDataMap.SetAt(_T("m_nPos"),rc.m_nPos);
		rcXDataMap.SetAt(_T("m_sCrossSectionScr"),rc.szCrossSectionScr);
		rcXDataMap.SetAt(_T("m_dLen"),rc.m_dLen);
		rcXDataMap.SetAt(_T("m_dZOff"),m_dZOff);
		rcXDataMap.SetAt(_T("m_dTAdd"),m_dTAdd);
		rcXDataMap.SetAt(_T("m_dHoleH"),m_dHoleH);
		rcXDataMap.SetAt(_T("m_dH"),m_dH);

		pGroup->GetSpecialtyData()->SetAt(_T("CGLBJDlg"),n,rcXDataMap);
	}
	return TRUE;
}

int CGLBJDlg::GetX3dSolidRecsShEw(AecDbX3dGroup*& pGroup,const AcGePoint3d& ptFr,const AcGeVector3d& vtDir)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		if (pGroup != NULL)
		{
			pGroup->RemoveAll3dSolidRec();

			for (int i = 0;i < 100;i++)
			{
				if ( !pGroup->GetSpecialtyData()->RemoveAt(_T("CGLBJDlg"),i) )
				{
					break;
				}
			}
		}
		else
		{
			pGroup = new AecDbX3dGroup;
		}

		AecDbShEarthWorm dbEW;
		AcGePoint3d ptSta(0,0,0);
		AcGePoint3d ptEnd(10,0,0);
		AcDbLine ln(ptSta,ptEnd);

		AecDb3dRoadAxisLine* pRoadLn = new AecDb3dRoadAxisLine;
		pRoadLn->AppendCurveSeg(&ln);

		STSection* pSection = GetShEwSection();
		if (pSection == NULL )
		{
			return 0;
		}

		dbEW.GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
		dbEW.SetSection(pSection->pReg, pSection->pt);
		dbEW.SetBaseCurve(pRoadLn);
		dbEW.GetSpecialtyData()->SetAt(KEY_ADDTIONSCR,pSection->sAddtionScr);
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT1,AS_MUNIT(pSection->dThick[0]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT2,AS_MUNIT(pSection->dThick[1]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT4,AS_MUNIT(pSection->dThick[2]));
		dbEW.GetSpecialtyData()->SetAt(KEY_THICKT5,AS_MUNIT(pSection->dThick[3]));

		delete pSection->pReg;
		pSection->pReg = NULL;
		delete pSection;
		delete pRoadLn;

		//外壁厚,内隔壁厚
		double dOutW = 0.0,dIntW = 0.0;
		dOutW = AS_MUNIT(pSection->dThick[0]);
		dIntW = AS_MUNIT(pSection->dThick[1]);

		if (dOutW < m_dHoleH)
			dOutW = m_dHoleH;

		double dSideAdd(.0);
		double dR = 0.0;
		double dL = 0.0;

		AcGePoint2d ptrODtTop,ptrODtBom,ptODt;
		dbEW.GetODAndID(ptrODtTop,ptrODtBom);
		dbEW.GetODAndThick(ptODt);

		//总高度
		double dHeight = m_dH;

		//总宽度
		double dWidth = ptODt.x;


		//底部壁厚增加
		double dBomAdd = 0.0;
		double dTopAdd = 0.0;

		double dLRAdd = 0.0,dLAdd = 0.0,dRAdd = 0.0,dTAdd = 0.0;

		AcArray<ERoom> arRooms;
		ERoom room;
		AcGePoint2d ptThick;
		AcGeLineSeg3d ln3d(ptFr,ptFr + 10.0 * vtDir);
		dbEW.GetSectionRoomsTo(ln3d,arRooms,ptThick);

		if (m_idxRoom < 0)
		{
			AfxMessageBox(_T("没有选择舱室,请选择舱室!"));
			return FALSE;
		}

		AcGeVector3d vtX = vtDir;
		vtX.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

		if (fabs(vtX.x) < 1.e-6)
			vtX.x = 0.0;

		if (fabs(vtX.y) < 1.e-6)
			vtX.y = 0.0;

		CString sIndex;
		for (int n = 0; n < m_arRecord.length();n++)
		{
			GLBJRecord& rc = m_arRecord.at(n);

			m_dCurRoomW = rc.m_dCurRoomW;
			m_dWAdd = rc.m_dWAdd;
			m_dOpenL = rc.m_dOpenL;
			m_dB = rc.m_dB;
			m_dAngle = rc.m_dAngle;
			m_dA2 = rc.m_dA2;
			m_bAllRoom = rc.m_bAllRoom;
			m_idxRoom = rc.m_idxRoom;
			m_sCrossSectionScr = rc.szCrossSectionScr;
			m_nPos = rc.m_nPos;
			m_dLen = rc.m_dLen;
			m_dZOff = rc.m_dZOff;
			m_dTAdd = rc.m_dTAdd;

			room = arRooms.at(m_idxRoom);

			AcGePoint3d ptOrg = ptFr;
			AcGeVector3d vtZ;
			X3dSolidRec rec;
			dTAdd = m_dTAdd;
			double dTLAdd = dTAdd;

			AcDbX3dSolid* pXSolid = NULL;
			if (m_bAllRoom)//整体
			{
				int nDir = (m_nPos == 0 ) ? -1 : 1;

				//取侧墙中心
				ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
				ptOrg += ( nDir * ( (m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 ) ) * vtX;
				ptOrg += ( m_dLen / 2.0 ) * vtDir;
				ptOrg.z = 0.0;
				ptOrg.z += m_dZOff;
				ptOrg.z -= 0.5 * dBomAdd;
				vtZ = nDir * vtX;

				if ( (m_idxRoom == 0 && m_nPos == 0 ) ||
					(m_idxRoom == arRooms.length() - 1 && m_nPos == 1) )//左外/右外
				{
					//原地挖掉
					pXSolid = new AcDbX3dSolid;
					pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2.0 * dOutW, dOutW);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolSubtract;
					_tcscpy(rec.szLockId,IDCreate());
					rec.pXSolid->SetGSMarkerID(n);
					pGroup->AddX3dSolidRec(rec);

					ptOrg -= vtZ * dOutW * 0.5;
					ptOrg.z += 0.5 * dBomAdd;
					ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

					pXSolid = new AcDbX3dSolid;
					pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen + 2 * m_dTAdd,dHeight + dBomAdd + dTopAdd,m_dWAdd + dOutW + m_dTAdd,PI / 2.0);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolUnite;
					_tcscpy(rec.szLockId,IDCreate());
					rec.pXSolid->SetGSMarkerID(n);
					pGroup->AddX3dSolidRec(rec);

					pXSolid = new AcDbX3dSolid;
					ptOrg += vtZ * m_dWAdd;
					ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
					pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dLen,dHeight - 2 * dOutW,m_dWAdd,PI / 2.0);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolSubtract;
					rec.pXSolid->SetGSMarkerID(n);
					_tcscpy(rec.szLockId,IDCreate());
					pGroup->AddX3dSolidRec(rec);
				}
				else//内部
				{
					//原地挖掉
					pXSolid = new AcDbX3dSolid;
					pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen + 2 * m_dTAdd,dHeight - 2 * dOutW, dIntW + m_dTAdd);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolSubtract;
					_tcscpy(rec.szLockId,IDCreate());
					rec.pXSolid->SetGSMarkerID(n);
					pGroup->AddX3dSolidRec(rec);

					//创建一新的
					ptOrg += vtZ * m_dWAdd;
					pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dLen,dHeight - 2 * dOutW, dIntW);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolUnite;
					rec.pXSolid->SetGSMarkerID(n);
					_tcscpy(rec.szLockId,IDCreate());
					pGroup->AddX3dSolidRec(rec);
				}
			}
			else//局部
			{
				int nDir = (m_nPos == 0 ) ? 1 : -1;

				//取侧墙中心
				ptOrg = (m_nPos == 0 ) ? room.ptGe[0] : room.ptGe[1];
				ptOrg += ( nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 ) ) * vtX;
				ptOrg += ( m_dB + m_dOpenL * 0.5 ) * vtDir;
				ptOrg.z = 0.0;//中心
				ptOrg.z += m_dZOff;
				ptOrg.z -= 0.5 * dBomAdd;
				vtZ = nDir * vtX;

				double dB = ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW : dIntW );
				double dT = dB;

				//内部原地挖掉
				pXSolid = new AcDbX3dSolid;
				pXSolid->Create(AcDbX3dSolid::kBox,ptOrg,vtZ,3,m_dOpenL,dHeight - 2 * dOutW, dB );
				rec.pXSolid = pXSolid;
				rec.bType = AcDb::kBoolSubtract;
				_tcscpy(rec.szLockId,IDCreate());
				rec.pXSolid->SetGSMarkerID(n);
				pGroup->AddX3dSolidRec(rec);

				double dAng = m_dAngle * PI / 180.0;
				double dAng2 = m_dA2 * PI / 180.0;

				if (m_nPos == 0)
					dB /= sin(dAng2);
				else
					dB /= sin(dAng);


				if (m_idxRoom == 0)
				{
					dTAdd += dLAdd;
				}
				else if (m_idxRoom == arRooms.length() - 1)
				{
					dTAdd += dRAdd;
				}

				dTLAdd = dTAdd;

				if (m_nPos == 0)
					dTLAdd /= sin(dAng2);
				else
					dTLAdd /= sin(dAng);

				double dB2 = ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW : dIntW );

				//外
				pXSolid = new AcDbX3dSolid;
				ptOrg -= ( nDir * ( ( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1) ? dOutW / 2.0 : dIntW / 2.0 ) ) * vtX;
				double dRoomH = room.ptGe[0].distanceTo(room.ptGe[1]);

				double dH = dHeight;//( m_idxRoom == 0 || m_idxRoom == arRooms.length() - 1 ) ? dHeight : dHeight - 2.0 * dOutW;

				if (fabs(m_dAngle - m_dA2) < 1.e-3)
				{
					ptOrg.z += 0.5 * dBomAdd;
					ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

					pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd,dAng);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolUnite;
					_tcscpy(rec.szLockId,IDCreate());
					rec.pXSolid->SetGSMarkerID(n);
					pGroup->AddX3dSolidRec(rec);

					//AcAxDocLock lock;
					//AcDb3dSolid* pSolidT = pXSolid->GetDraw3dSolid();
					//pSolidT->setColorIndex(kRed);
					//AddToModelSpace(pSolidT,NULL,true);

					//挖去
					pXSolid = new AcDbX3dSolid;
					//ptOrg.z += 0.5 * dBomAdd;
					ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);
					pXSolid->Create(AcDbX3dSolid::kQPyramid,ptOrg,vtZ,4,m_dOpenL,dH - dOutW * 2.0 ,m_dWAdd,dAng);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolSubtract;
					_tcscpy(rec.szLockId,IDCreate());
					rec.pXSolid->SetGSMarkerID(n);
					pGroup->AddX3dSolidRec(rec);

					//pSolidT = pXSolid->GetDraw3dSolid();
					//pSolidT->setColorIndex(kRed);
					//AddToModelSpace(pSolidT,NULL,true);

				}
				else
				{
					ptOrg.z += 0.5 * dBomAdd;
					ptOrg.z -= (0.5 * dBomAdd - 0.5 * dTopAdd);

					pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL + 2.0 * dB + 2 * dTLAdd, dH + dBomAdd + dTopAdd,m_dWAdd + dT + dTAdd,dAng,dAng2);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolUnite;
					_tcscpy(rec.szLockId,IDCreate());
					rec.pXSolid->SetGSMarkerID(n);
					pGroup->AddX3dSolidRec(rec);

					//挖去
					pXSolid = new AcDbX3dSolid;
					//ptOrg += vtZ * m_dWAdd;
					ptOrg.z += (0.5 * dBomAdd - 0.5 * dTopAdd);

					pXSolid->Create(AcDbX3dSolid::kWPyramid,ptOrg,vtZ,5,m_dOpenL,dH - dOutW * 2.0 ,m_dWAdd,dAng,dAng2);
					rec.pXSolid = pXSolid;
					rec.bType = AcDb::kBoolSubtract;
					_tcscpy(rec.szLockId,IDCreate());
					rec.pXSolid->SetGSMarkerID(n);
					pGroup->AddX3dSolidRec(rec);
				}
			}

			AecDbObjXDataMap rcXDataMap;
			rcXDataMap.SetAt(_T("m_dCurRoomW"),rc.m_dCurRoomW);
			rcXDataMap.SetAt(_T("m_dWAdd"),rc.m_dWAdd);
			rcXDataMap.SetAt(_T("m_dOpenL"),rc.m_dOpenL);
			rcXDataMap.SetAt(_T("m_dB"),rc.m_dB);
			rcXDataMap.SetAt(_T("m_dAngle"),rc.m_dAngle);
			rcXDataMap.SetAt(_T("m_dA2"),rc.m_dA2);
			rcXDataMap.SetAt(_T("m_bAllRoom"),rc.m_bAllRoom);
			rcXDataMap.SetAt(_T("m_idxRoom"),rc.m_idxRoom);
			rcXDataMap.SetAt(_T("m_nPos"),rc.m_nPos);
			rcXDataMap.SetAt(_T("m_sCrossSectionScr"),rc.szCrossSectionScr);
			rcXDataMap.SetAt(_T("m_dLen"),rc.m_dLen);
			rcXDataMap.SetAt(_T("m_dZOff"),m_dZOff);
			rcXDataMap.SetAt(_T("m_dTAdd"),m_dTAdd);
			rcXDataMap.SetAt(_T("m_dHoleH"),m_dHoleH);
			rcXDataMap.SetAt(_T("m_dH"),m_dH);
		pGroup->GetSpecialtyData()->SetAt(_T("CGLBJDlg"),n,rcXDataMap);
		}
	}
	return TRUE;
}

void CGLBJDlg::OnBnClickedButton2()
{
	if (m_bIsAddRec)
	{
		UpdateData();

		if (m_dAngle - 90.0 > 1.e-10)
		{
			AfxMessageBox(_T("底角必须小于等于90度!且大于0"));
			return;
		}

		if (m_idxRoom == -1)
		{
			AfxMessageBox(_T("请选择要变径的舱室!"));
			return;
		}

		if ( m_dWAdd < 1.e-10)
		{
			AfxMessageBox(_T("宽度增量太小!必须大于0.01米!"));
			return;
		}

		double dX = m_dOpenL - 2.0 * m_dWAdd * cos(m_dAngle * PI / 180.0) / sin(m_dAngle * PI / 180.0);
		if (dX < 0.5)
		{
			CString sTemp;
			sTemp.Format(_T("在 %g 度的情况下,L 尺寸太小!"),m_dAngle);
			AfxMessageBox(sTemp);
			return;
		}

		GLBJRecord rc;

		rc.m_dCurRoomW = m_dCurRoomW;
		rc.m_dWAdd = m_dWAdd;
		rc.m_dOpenL = m_dOpenL;
		rc.m_dB = m_dB;
		rc.m_dAngle = m_dAngle;
		rc.m_dA2 = m_dA2;
		rc.m_bAllRoom = m_bAllRoom;
		rc.m_idxRoom = m_idxRoom;
		//_tcscpy(rc.szCrossSectionScr,m_sCrossSectionScr);
		rc.szCrossSectionScr = m_sCrossSectionScr;
		rc.m_nPos = m_nPos;
		rc.m_dLen = m_dLen;
		rc.m_nIndex = m_wndRecordList.GetItemCount() + 1;
		rc.m_dZOff = m_dZOff;
		rc.m_dTAdd = m_dTAdd;

		m_arRecord.append(rc);

		CString sRecord,sPos;
		sPos = rc.m_nPos == 0 ? _T("舱室向左侧变径") : _T("舱室向右侧变径");
		sRecord.Format(_T("记录[ 第%d舱室 %s]"), rc.m_idxRoom + 1,sPos);
		//int nPos = m_wndCombo.AddString(sRecord);
		//m_wndCombo.SetCurSel(nPos);

		int nPos = m_wndRecordList.InsertItem(m_wndRecordList.GetItemCount(),sRecord,0);
		m_wndRecordList.SetItemState(nPos,LVIS_SELECTED,LVIS_SELECTED);

		AddRecordPreview(m_nPos,m_idxRoom);
	}
}

void CGLBJDlg::AddRecordPreview(int nPos,int idxRoom)
{
	AcGsView* pView = m_wndViewCtrl.view();
	AcGsModel* pModel = m_wndViewCtrl.model();

	CString sPosRoom;
	sPosRoom.Format(_T("%d-%d"),nPos,idxRoom);

	AcDbEntity* pEnt = NULL;
	m_mapPosRoom2Pl.Lookup(sPosRoom,(void*&)pEnt);
	if (pEnt != NULL)
	{
		pView->erase(pEnt);
	}

	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	AcGeLineSeg3d ln;
	AcGePoint3d pt2(1000.0, 0, 0);
	ln.set(AcGePoint3d::kOrigin, pt2);

	AcGeVector3d vtDirX = nPos == 0 ? -AcGeVector3d::kXAxis : AcGeVector3d::kXAxis;

	{
		ERoom room;
		worm.GetRoom(idxRoom,room);

		AcGePoint2d ptIOW = arDatas.last();

		AcGePoint3d ptGe = room.ptGe[m_nPos];//0 : 1
		ptGe.y -= ptIOW.y;

		AcDbPolyline* pPl = new AcDbPolyline;
		pPl->addVertexAt(0,ptGe.convert2d(AcGePlane::kXYPlane));
		
		ptGe += 2.0 * ptIOW.y * vtDirX;
		pPl->addVertexAt(1,ptGe.convert2d(AcGePlane::kXYPlane));

		ptGe.y += room.ptGe[0].distanceTo(room.ptGe[3]);
		ptGe.y += 2.0 * ptIOW.y;
		pPl->addVertexAt(2,ptGe.convert2d(AcGePlane::kXYPlane));

		ptGe -= 2.0 * ptIOW.y * vtDirX;
		pPl->addVertexAt(3,ptGe.convert2d(AcGePlane::kXYPlane));

		pPl->setColorIndex(kRed);
		pPl->setConstantWidth(0.1);

		if (pView != NULL)
		{
			pView->add(pPl, pModel);
		}

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();

		m_mapPosRoom2Pl.SetAt(sPosRoom,pPl);
	}
}

void CGLBJDlg::SetReloadGLBJ(AecDbObjXDataMap* pXDataMap)
{
	m_pGLBJXDataMap = pXDataMap;
}

void CGLBJDlg::OnCbnSelchangeCombo1()
{
	/*int nSel = m_wndCombo.GetCurSel();
	if (nSel != -1)
	{
		GLBJRecord& rc = m_arRecord.at(nSel);

		m_dCurRoomW = rc.m_dCurRoomW;
		m_dWAdd = rc.m_dWAdd;
		m_dOpenL = rc.m_dOpenL;
		m_dB = rc.m_dB;
		m_dAngle = rc.m_dAngle;
		m_dA2 = rc.m_dA2;
		m_bAllRoom = rc.m_bAllRoom;
		m_idxRoom = rc.m_idxRoom;
		m_sCrossSectionScr = rc.szCrossSectionScr;
		m_nPos = rc.m_nPos;
		m_dLen = rc.m_dLen;

		HitEarthWorm(m_idxRoom);

		UpdateData(FALSE);
	}*/
}

void CGLBJDlg::OnBnClickedButton11()
{
	POSITION ps = m_wndRecordList.GetFirstSelectedItemPosition();
	int nSel = m_wndRecordList.GetNextSelectedItem(ps);//m_wndCombo.GetCurSel();
	if (nSel != -1)
	{
		UpdateData();
		GLBJRecord& rc = m_arRecord.at(nSel);

		rc.m_dCurRoomW = m_dCurRoomW;
		rc.m_dWAdd = m_dWAdd;
		rc.m_dOpenL = m_dOpenL;
		rc.m_dB = m_dB;
		rc.m_dAngle = m_dAngle;
		rc.m_dA2 = m_dA2;
		rc.m_bAllRoom = m_bAllRoom;
		rc.m_idxRoom = m_idxRoom;
		//_tcscpy(rc.szCrossSectionScr,m_sCrossSectionScr);
		rc.szCrossSectionScr = m_sCrossSectionScr;
		rc.m_nPos = m_nPos;
		rc.m_dLen = m_dLen;
		rc.m_dZOff = 0.0;
		rc.m_dTAdd = m_dTAdd;

		m_arRecord.setAt(nSel,rc);
		AddRecordPreview(m_nPos,m_idxRoom);
	}
}

void CGLBJDlg::OnBnClickedButton1()
{
	//尺寸示意图
	CCCSYDlg dlg;
	dlg.SetBmpFileName(_T("GLBJ.bmp"));
	dlg.DoModal();	
}

void CGLBJDlg::HitEarthWorm(int idxRoom)
{
	if (m_sCrossSectionScr.Find(_T("RECT")) == -1)
	{
		HitShEarthWorm(idxRoom);
		return;
	}

	//判断 点落在 room 内
	AecDbEarthWorm worm;
	worm.SetCrossSectionScr(m_sCrossSectionScr);
	worm.SetChamferInter(100.0);

	ESection eType = eRect;
	AcGePoint2dArray arDatas;
	eType = worm.ExtractEarthWormScr(arDatas);

	AcGeLineSeg3d ln;
	AcGePoint3d pt2(1000.0, 0, 0);
	ln.set(AcGePoint3d::kOrigin, pt2);

	AcGePoint3d ptGe[4];
	AcDbVoidPtrArray arRegPtrs;
	int nRooms = worm.CreateSectionRoomRegion(ln, eType, arDatas, arRegPtrs);
	if (nRooms > 0)
	{
		if (idxRoom > -1 && idxRoom < arRegPtrs.length() )
		{
			AcDbRegion* pReg = (AcDbRegion*)arRegPtrs.at(idxRoom);
			if (pReg != NULL)
			{
				AcDbExtents ext;
				pReg->getGeomExtents(ext);

				ptGe[0] = ext.minPoint();
				ptGe[1] = ptGe[0];
				ptGe[1].x = ext.maxPoint().x;
				ptGe[2] = ext.maxPoint();
				ptGe[3] = ptGe[0];
				ptGe[3].y = ext.maxPoint().y;

				AcGsView* pView = m_wndViewCtrl.view();
				AcGsModel* pModel = m_wndViewCtrl.model();
				if (pView != NULL)
				{
					if (m_pRectCell != NULL)
						pView->erase(m_pRectCell);
				}

				if (m_pRectCell != NULL)
				{
					for (int i = 0; i < 4; i++)
					{
						m_pRectCell->setPointAt(i, ptGe[i].convert2d(AcGePlane::kXYPlane));
					}
				}

				if (pView != NULL)
				{
					pView->add(m_pRectCell, pModel);
				}
			}
		}

		FreeBuffer(arRegPtrs);

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();

		UpdateData(FALSE);
	}
}

STSection* CGLBJDlg::GetShEwSection() const
{
	if (m_sCrossSectionScr.Find(_T("RECT")) != -1)
	{
		return NULL;
	}

	AcGePoint3d pt(0,0,0);
	CString sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.sat");

	STSection* pSection = new STSection;
	pSection->pt = pt;

	CStdioFile file;
	if (file.Open(sFullPath,CFile::modeCreate |CFile::modeWrite ))
	{
		CString sScr = m_sCrossSectionScr;
		int nPos = m_sCrossSectionScr.Find(_T("<ELAGN:") );
		if (nPos != -1)
		{
			sScr = m_sCrossSectionScr.Mid(0,nPos);
		}
		file.WriteString(sScr);
		file.Close();

		CString sX,sY;
		CString sPt = m_sCrossSectionScr.Mid(nPos);
		sPt.TrimLeft(_T("<ELAGN:"));
		sPt.TrimRight(_T(">"));
		nPos = sPt.Find(_T(','));
		if (nPos != -1)
		{
			CStringArray arInfo;
			CoreTools::SplitStrintToArray(sPt,arInfo,_T(','));

			if (arInfo.GetSize() >= 2)
			{
				sX = arInfo.GetAt(0);
				sY = arInfo.GetAt(1);
				pSection->pt.set(_ttof(sX),_ttof(sY),0.0);

				if (arInfo.GetSize() >= 6)
				{
					pSection->dThick[0] = _ttof(arInfo.GetAt(2));
					pSection->dThick[1] = _ttof(arInfo.GetAt(3));
					pSection->dThick[2] = _ttof(arInfo.GetAt(4));
					pSection->dThick[3] = _ttof(arInfo.GetAt(5));
				}
			}
		}
		else//读取壁厚
		{
			CString sThickFile = FilePath::GetSysDir();
			sThickFile.MakeLower();
			sThickFile += _T("\\DGJM.ext");

			CString sLine;
			CStdioFile filet;
			if (filet.Open(sThickFile,CFile::modeRead | CFile::typeText))
			{
				sLine = _T("");
				filet.ReadString(sLine);

				sLine.TrimRight(_T('\n'));
				CStringArray arInfo;
				SplitStrintToArray(sLine,arInfo,_T(','));

				if (arInfo.GetSize() >= 6)
				{
					pSection->dThick[0] = _ttof(arInfo.GetAt(2));
					pSection->dThick[1] = _ttof(arInfo.GetAt(3));
					pSection->dThick[2] = _ttof(arInfo.GetAt(4));
					pSection->dThick[3] = _ttof(arInfo.GetAt(5));
				}
				filet.Close();
			}
		}
	}

	pSection->pReg = NULL;

	AcDbVoidPtrArray arBodyPtrs;
	if ( Acad::eOk == AcDbBody::acisIn(sFullPath,arBodyPtrs) )
	{
		if (arBodyPtrs.length() > 0)
		{
			AcDbEntity* pEnt = (AcDbEntity*)arBodyPtrs.first();
			AcDbRegion* pRegion = AcDbRegion::cast(pEnt);

			if (pRegion != NULL)
			{
				pSection->pReg = pRegion;
			}
		}
	}
	return pSection;
}

void CGLBJDlg::HitShEarthWorm(int idxRoom)
{
	if (m_curSection.pReg != NULL)
	{
		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		//判断点落在region内
		AcDbExtents ext;
		AcDbCurve* pPl = NULL;
		AcDbRegion* pRegion = NULL;
		AcDbRay rayx1,rayx2;
		AcDbCurve* pCurve = NULL;
		AcGePoint3dArray arPts1,arPts2;

		AcDbVoidPtrArray arCurPtrs,arSubEntPtrs;
		if (idxRoom > -1 && idxRoom < m_arRegionRooms.length())
		{
			pRegion = (AcDbRegion*)m_arRegionRooms.at(idxRoom);

			arCurPtrs.removeAll();
			pRegion->explode(arCurPtrs);

			arSubEntPtrs.removeAll();
			pCurve = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs,arSubEntPtrs);
			pPl = AcDbCurve::cast(pCurve);
			if (pPl != NULL)
			{
				pPl->intersectWith(&rayx1,AcDb::kOnBothOperands,arPts1);
				pPl->intersectWith(&rayx2,AcDb::kOnBothOperands,arPts2);

				if (!arPts1.isEmpty() && !arPts2.isEmpty())
				{
					if (pView != NULL && m_pRegionRoom != NULL)
					{
						pView->erase(m_pRegionRoom);
					}

					m_pRegionRoom = pRegion;
					m_pRegionRoom->setColorIndex(6);

					if (pView != NULL)
					{
						pView->add(m_pRegionRoom, pModel);
					}

					delete pPl;
					m_wndViewCtrl.view()->invalidate();
					m_wndViewCtrl.RedrawWindow();
					return;
				}
			}	
		}
	}
}

LRESULT CGLBJDlg::OnViewShEwLButtonDown(WPARAM wp, LPARAM lp)
{
	//鼠标点击的点
	AcGePoint3d* pPt = (AcGePoint3d*)lp;
	pPt->z = 0.0;

	if (m_curSection.pReg != NULL)
	{
		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		//判断点落在region内
		AcDbExtents ext;
		AcDbCurve* pPl = NULL;
		AcDbRegion* pRegion = NULL;
		AcDbRay rayx1,rayx2;
		AcDbCurve* pCurve = NULL;
		AcGePoint3dArray arPts1,arPts2;

		rayx1.setBasePoint(*pPt);
		rayx1.setUnitDir(AcGeVector3d::kXAxis);

		rayx2.setBasePoint(*pPt);
		rayx2.setUnitDir(-AcGeVector3d::kXAxis);

		AcDbVoidPtrArray arCurPtrs,arSubEntPtrs;
		for (int i = 0;i < m_arRegionRooms.length();i++)
		{
			pRegion = (AcDbRegion*)m_arRegionRooms.at(i);

			arCurPtrs.removeAll();
			pRegion->explode(arCurPtrs);

			arSubEntPtrs.removeAll();
			pCurve = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs,arSubEntPtrs);
			pPl = AcDbCurve::cast(pCurve);
			if (pPl != NULL)
			{
				pPl->intersectWith(&rayx1,AcDb::kOnBothOperands,arPts1);
				pPl->intersectWith(&rayx2,AcDb::kOnBothOperands,arPts2);

				if (!arPts1.isEmpty() && !arPts2.isEmpty())
				{
					if (pView != NULL && m_pRegionRoom != NULL)
					{
						pView->erase(m_pRegionRoom);
					}

					m_pRegionRoom = pRegion;
					m_pRegionRoom->setColorIndex(6);

					if (pView != NULL)
					{
						pView->add(m_pRegionRoom, pModel);
					}

					delete pPl;
					m_wndViewCtrl.view()->invalidate();
					m_wndViewCtrl.RedrawWindow();
					break;
				}
				delete pPl;
			}	
		}
	}
	return 0L;
}


void CGLBJDlg::OnNMClickList1(NMHDR *pNMHDR, LRESULT *pResult)
{
	LPNMITEMACTIVATE pNMItemActivate = reinterpret_cast<LPNMITEMACTIVATE>(pNMHDR);
	if (pNMItemActivate != NULL)
	{
		if ( pNMItemActivate->iItem != -1)
		{
			int nSel = pNMItemActivate->iItem;
			GLBJRecord& rc = m_arRecord.at(nSel);

			m_dCurRoomW = rc.m_dCurRoomW;
			m_dWAdd = rc.m_dWAdd;
			m_dOpenL = rc.m_dOpenL;
			m_dB = rc.m_dB;
			m_dAngle = rc.m_dAngle;
			m_dA2 = rc.m_dA2;
			m_bAllRoom = rc.m_bAllRoom;
			m_idxRoom = rc.m_idxRoom;
			m_sCrossSectionScr = rc.szCrossSectionScr;
			m_nPos = rc.m_nPos;
			m_dLen = rc.m_dLen;
			m_dZOff = rc.m_dZOff;

			HitEarthWorm(m_idxRoom);

			UpdateData(FALSE);
		}
	}
	*pResult = 0;
}

void CGLBJDlg::OnBnClickedButton3()
{
	POSITION ps = m_wndRecordList.GetFirstSelectedItemPosition();
	if (ps != NULL)
	{
		int nItem = m_wndRecordList.GetNextSelectedItem(ps);
		if (nItem != -1)
		{
			int nRes = AfxMessageBox(_T("选择的记录即将删除,确认要删除吗?"),MB_YESNO);
			if (nRes == IDYES)
			{
				GLBJRecord& rc = m_arRecord.at(nItem);
				CString sPosRoom;
				sPosRoom.Format(_T("%d-%d"),rc.m_nPos,rc.m_idxRoom);

				AcDbEntity* pEnt = NULL;
				if (m_mapPosRoom2Pl.Lookup(sPosRoom,(void*&)pEnt))
				{
					AcGsView* pView = m_wndViewCtrl.view();
					AcGsModel* pModel = m_wndViewCtrl.model();
					if (pView != NULL)
					{
						pView->erase(pEnt);
					}
				}

				m_arRecord.removeAt(nItem);
				m_wndRecordList.DeleteItem(nItem);

				m_wndViewCtrl.view()->invalidate();
				m_wndViewCtrl.RedrawWindow();
			}
		}
	}
}