#include "stdafx.h"
#include "AecDbECableLine.h"
#include "AecDbECableTray.h"
#include "AecDbEcFitting.h"
#include "AecAngleWatch.h"
#include "AecDbECableJig.h"
#include "AECStatusRecord.h"
#include "KTSetting.h"
#include "CoreTools.h"
#include "AecDbEwEquipment.h"
#include "CablelineTools.h"
#include "AecDbX3dPartEntity.h"
#include "CWTXXDlg.h"

CMapStringToString *g_pMapData = NULL;
extern AcGePoint3d MidPoint(const AcGePoint3d& pt1,const AcGePoint3d& pt2);

double AsDNUnit(double dVal)
{
	struct resbuf rb;
	acedGetVar(_T("INSUNITS"), &rb);
	if (rb.resval.rint == AcDb::kUnitsMeters)
	{
		dVal *= 0.001;
	}
	return dVal;
}

double GetElbowL(AecHvac::DuctParam* pParam)
{
	double dL = 0.0;
	if (pParam->eType == eCircle)
		dL = pParam->dSize[0]; 
		
	double dD = __max(pParam->dSize[3], pParam->dSize[0]);
	
	double dRatio = pParam->m_dRatio;
	double dLx = (int)(dRatio * dD / 3.0 + 0.5);//默认50
	if (dLx > AsDNUnit(50.0))
		dLx = AsDNUnit(50.0);
	dL = dRatio * dD + dLx;
	return dL;
}

double GetElbowLx(AecHvac::DuctParam* pParam)
{
	double dD = __max(pParam->dSize[3], pParam->dSize[0]);

	double dRatio = pParam->m_dRatio;
	double dLx = (int)(dRatio * dD / 3.0 + 0.5);//默认50
	if (dLx > AsDNUnit(50.0))
		dLx = AsDNUnit(50.0);

	if (pParam->eType == eCircle)
		dLx = AsDNUnit(50.0);

	return dLx;
}

static AcDbObjectId GetConnectObject(const AecInterface &intf, const CArray<AecInterface> &arr)
{
	for (int i = 0; i < arr.GetSize(); ++i)
	{
		const AecInterface &ff(arr[i]);
		if (intf.ptPos == ff.ptPos && intf.idOwner != ff.idOwner) return ff.idOwner;
	}
	return AcDbObjectId::kNull;
}

typedef struct PointParam
{
	AcGePoint3d ptOn;
	double dParam;
}POINTPARAM;

static bool ComparePtparam(PointParam ptParam1,PointParam ptParam2)
{
	if (ptParam1.dParam - ptParam2.dParam < 1.e-10)
	{
		return true;
	}
	return false;
}

void SortPoints(AcGePoint3dArray& points,AcDbCurve* pLine)
{
	PointParam ptParam;
	std::vector<PointParam> points2;

	for (int i = 0;i < points.length();i++)
	{
		ptParam.ptOn = points.at(i);
		pLine->getParamAtPoint(points.at(i),ptParam.dParam);
		points2.push_back(ptParam);
	}
	std::sort(points2.begin(),points2.end(),ComparePtparam);

	points.setLogicalLength(0);
	std::vector<PointParam>::iterator it;
	for (it = points2.begin(); it < points2.end(); it++)
	{
		points.append((*it).ptOn);
	}
}

AecDbECableLine::AecDbECableLine()
{
	m_pAngleWatch = NULL;
	m_pPipeJig = NULL;
	m_pPipeParam = NULL;
	m_pCurPipeLine[0] = NULL;
	m_pCurPipeLine[1] = NULL;
	m_bStopCommand = FALSE;
	m_idStartDragFrom = AcDbObjectId::kNull;
	m_bHasFit = true;
	memset(&m_lHolder, 0, sizeof(XHolder));
	memset(&m_rHolder, 0, sizeof(XHolder));
	m_bHasHolder = FALSE;
}

AecDbECableLine::AecDbECableLine(AecDbECableJig* pJig)
{
	m_pAngleWatch = new AecAngleWatch;
	m_pPipeJig = pJig;
	m_pPipeParam = NULL;
	m_pCurPipeLine[0] = NULL;
	m_pCurPipeLine[1] = NULL;
	m_bStopCommand = FALSE;
	m_idStartDragFrom = AcDbObjectId::kNull;
	m_bHasFit = true;
	memset(&m_lHolder, 0, sizeof(XHolder));
	memset(&m_rHolder, 0, sizeof(XHolder));
	m_bHasHolder = FALSE;
}

AecDbECableLine::~AecDbECableLine(void)
{
	if ( m_pAngleWatch != NULL)
		DELETE_PTR(m_pAngleWatch);

	if (m_pPipeParam)
		delete m_pPipeParam;
}

Acad::ErrorStatus AecDbECableLine::Draw2d(AcGiDraw &mode) const
{
	if (m_pCurPipeLine[0] != NULL )
	{
		((AecDbECableLine*)(m_pCurPipeLine[0]))->Draw2d(mode);
	}
	if (m_pAngleWatch != NULL && m_pCurPipeLine[0] != NULL)
	{
		m_pAngleWatch->Draw2d(mode);
	}
	return Acad::eOk;
}

void AecDbECableLine::SetPipeParam(AecHvac::DuctParam* pPipePar)
{
	if (m_pPipeParam == NULL)
		m_pPipeParam = new AecHvac::DuctParam;

	memcpy(m_pPipeParam,pPipePar,sizeof(AecHvac::DuctParam));
}

AecHvac::DuctParam* AecDbECableLine::GetPipeParam()
{
	return m_pPipeParam;
}

void AecDbECableLine::SetXHolder(const XHolder &lHolder, const XHolder &rHolder)
{
	memcpy(&m_lHolder, &lHolder, sizeof(XHolder));
	memcpy(&m_rHolder, &rHolder, sizeof(XHolder));
	m_bHasHolder = TRUE;
}

AecInterface* AecDbECableLine::GetLastInterface()
{
	int nLen = m_arHistoryIntfs.GetSize();
	if (nLen > 0)
	{
		AecInterface& intf = m_arHistoryIntfs[nLen - 1];
		return &intf;
	}
	return NULL;
}

double AecDbECableLine::GetEndElevation() const
{
	return m_pPipeParam->m_dEl;
}

void AecDbECableLine::SetElbowAndPipe(bool bHasFit)
{
	m_bHasFit = bHasFit;
}

BOOL AecDbECableLine::AddPipeNode(AECStatusRecord* pRec ,WPipe::PipeDraw ePipe )
{
	switch(ePipe)
	{
	case WPipe::eToPreView:
		{
			//预览
			if (m_pCurPipeLine[0] == NULL)
				m_pCurPipeLine[0] = new AecDbECableTray;

			AecDbECableTray* pWpipe = (AecDbECableTray*)m_pCurPipeLine[0];
			AecDbObjXDataMap* pXDataMap = pWpipe->GetSpecialtyData();

			pWpipe->SetDuctParam(m_pPipeParam);
			pWpipe->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
			pWpipe->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);

			AcGePoint3d ptGe,ptGe1,ptGe2;
			ptGe = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();
			ptGe1 = pRec->GetAcquirePoint();

			//第一次对齐即可
			BOOL bAdjust3d = FALSE;
			AcGeVector3d vtAg(0,0,0);
			if (m_arHistoryIntfs.GetSize() == 0)
			{
				bAdjust3d = TRUE;
				vtAg = ptGe1 - ptGe;
				vtAg.normalize();

				switch(m_pPipeParam->m_nAlign)
				{
				case 0://底部左
					{
						vtAg.rotateBy(-PI / 2.0,AcGeVector3d::kZAxis);
						vtAg *= 0.5 * m_pPipeParam->dSize[0];
						break;
					}
				case 1://底部中
					{
						vtAg.set(0,0,0);
						break;
					}
				case 2://底部右
					{
						vtAg.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
						vtAg *= 0.5 * m_pPipeParam->dSize[0];
						break;
					}
				default:
					break;
				}
				ptGe += vtAg;
				ptGe1 += vtAg;
			}

			pWpipe->SetStartPoint( ptGe );
			pWpipe->SetEndPoint( ptGe1 );

			if (bAdjust3d)
			{
				ptGe1 -= vtAg;
			}

			//水平桥架
			AcGeVector3d vtDir = AcGeVector3d::kXAxis;
			vtDir = m_pAngleWatch->m_vtDir;

			AcGeVector3d vtWDir = vtDir;
			vtWDir.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

			AcGeVector3d vtNorm = vtDir.crossProduct(vtWDir);
			pWpipe->GetSpecialtyData()->SetAt(KEY_NORMAL,vtNorm);

			m_pAngleWatch->m_bFallInSnap = FALSE;
			m_pAngleWatch->snapWatch(ptGe,ptGe1,vtDir);
			pRec->SetAcquirePoint(ptGe1);
			m_pAngleWatch->m_bFallInSnap = TRUE;

			break;
		}
	case WPipe::eToCreate:
		{
			AcGePoint3d ptGe,ptGe1;
			ptGe1 = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();
			ptGe = pRec->GetAcquirePoint();

			//判断方向是否一致
			int nLen = m_arHistoryIntfs.GetSize();
			if (nLen == 0)
			{
				//第一次创建
				CreateWPipe(pRec,TRUE); //考虑首尾三通
			}
			else
			{
				AecInterface tInf = m_arHistoryIntfs[nLen - 1];
				AcGeVector3d vtDir1 = tInf.vtDir;

				AcGeVector3d vtDir2 = ptGe - ptGe1;
				if (vtDir2.isParallelTo(vtDir1)) //平行,和上次同向,连续画
				{
					if ( !ExtendLastWPipe(pRec) )
					{
						CreateWPipe(pRec,FALSE);
					}
				}
				else //添加弯头过渡
				{
					if (m_bHasFit)
					{
						EFittingType type(eElbow);
						CreateElbowAndPipe(pRec, type);
						m_pPipeParam->m_dEl = pRec->GetAcquirePoint().z;//4-24
					}
					else
					{
						CreateWPipe(pRec, FALSE);
					}
				}
			}

			AcGeVector3d vtDir = AcGeVector3d::kXAxis;
			vtDir = m_pAngleWatch->m_vtDir;
			ptGe1.z = m_pPipeParam->m_dEl;
			ptGe.z = m_pPipeParam->m_dEl;

			m_pAngleWatch->m_bFallInSnap = FALSE;
			m_pAngleWatch->snapWatch(ptGe1,ptGe,vtDir);
			m_pAngleWatch->m_bFallInSnap = TRUE;

			break;
		}
	default:
		break;
	}
	return TRUE;
}

BOOL AecDbECableLine::AddReducer(AECStatusRecord* pCurStaRec,AecHvac::DuctParam* pParam)
{
	AecDbEcFitting* pFit = new AecDbEcFitting;
	AecDbObjXDataMap* pXDataMap = pFit->GetSpecialtyData();

	AcGeVector3d vtDir = AcGeVector3d::kXAxis;
	AecInterface* pIntf = GetLastInterface();
	if (pIntf != NULL)
	{
		vtDir = pIntf->vtDir;
	}

	vtDir.normalize();
	AcGePoint3d ptSta = pIntf->ptPos;
	AcGePoint3d ptEnd = ptSta + vtDir * pParam->m_dL;

	AcGeVector3d vtNorm = pParam->m_vtNrom;

	pParam->dSize[3] = m_pPipeParam->dSize[0];

	//电缆沟设置分支
	pParam->dSize[12] = pParam->dSize[4];
	pParam->dSize[13] = pParam->dSize[5];
	pParam->dSize[14] = pParam->dSize[6];
	pParam->dSize[15] = pParam->dSize[7];
	pParam->dSize[16] = pParam->dSize[8];
	pParam->dSize[17] = pParam->dSize[9];
	pParam->dSize[18] = pParam->dSize[10];

	pFit->SetDuctParam(*pParam);

	if (pParam->m_app == WPipe::eTrench && m_bHasHolder)
	{
		pFit->SetXHolder(kLeft, m_lHolder);
		pFit->SetXHolder(kRight, m_rHolder);
	}

	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pFit->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);
	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME,(int)eReduce);
	pFit->GetSpecialtyData()->SetAt(KEY_MAJBR, vtDir);
	pFit->GetSpecialtyData()->SetAt(KEY_MINBR, vtDir);

	AcGePoint3d ptMid = MidPoint(ptSta,ptEnd);
	pFit->GetSpecialtyData()->SetAt(KEY_MID, ptMid);
	pFit->GetSpecialtyData()->SetAt(HELB_RadRatio, pParam->m_dRatio);
	pFit->GetSpecialtyData()->SetAt(PIPE_THICK, pParam->dSize[2]);
	pFit->GetSpecialtyData()->SetAt(HELB_LX, 0.0);//没有直边长度

	//是否偏移
	pFit->GetSpecialtyData()->SetAt(KEY_ECCEN,pParam->m_nEcCen);
	pFit->GetSpecialtyData()->SetAt(KEY_NORMAL,vtNorm);

	if (pParam->m_nEcCen != 0)
	{
		AecInterface inf1;
		pFit->GetInterface(1,inf1);
		ptEnd = inf1.ptPos;
	}

	if (pParam->m_app == WPipe::eTrench && m_bHasHolder)
	{
		pFit->SetXHolder(kLeft, m_lHolder);
		pFit->SetXHolder(kRight, m_rHolder);
	}

	//设置图层
	
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN,m_pPipeParam->szSys,4,_T("center2"),NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT,m_pPipeParam->szSys,nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG,m_pPipeParam->szSys,7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"),NULL);

	pFit->setLayer(idOutLay);
	pFit->SetDoubleLayer(idOutLay);
	pFit->SetCenterLayer(idCenLay);
	pFit->SetCenterLayer(idCenLay);

	AcDbObjectId id = CoreTools::AddToModelSpace(pFit);

	AddUserData(id,pXDataMap,5);

	AecInterface intf;
	intf.ptPos = ptEnd;
	intf.vtDir = vtDir;
	intf.idOwner = id;
	PushInterface(intf);

	//覆盖当前的param
	PushPipeParam();

	memcpy(m_pPipeParam,pParam,sizeof(AecHvac::DuctParam));//回退

	//创建余下管子,并插入虚拟状态记录
	AECStatusRecord* pRecMid = new AECStatusRecord;
	pRecMid->CopyFrom(pCurStaRec);
	pRecMid->SetAcquirePoint(ptEnd);
	m_pPipeJig->PushBackStatusRec(pRecMid);
	pCurStaRec->SetAcquirePoint(ptEnd);

	return TRUE;
}

AcDbObjectId AecDbECableLine::CreateElbow(AcGeVector3d vtMaj
										 ,AcGePoint3d ptMid
										 ,AcGeVector3d vtMin
										 ,AecHvac::DuctParam* pparam
										 ,BOOL bInsertBeforLast/* = FALSE*/)
{
	AecDbEcFitting* pFit = new AecDbEcFitting;
	AecDbObjXDataMap* pXDataMap = pFit->GetSpecialtyData();

	//图层
	//设置图层
	AecHvac::DuctParam *pParam = pparam;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, m_pPipeParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, m_pPipeParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, m_pPipeParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	pFit->setLayer(idOutLay);
	pFit->SetDoubleLayer(idOutLay);
	pFit->SetCenterLayer(idCenLay);
	pFit->SetCenterLayer(idCenLay);

	pFit->SetDuctParam(*pparam);

	double dLx = GetElbowLx(pparam);
	double dL = GetElbowL(pparam);
	double dRatio = pparam->m_dRatio;

	bool bIsLastInfParamFit = false;
	if (m_pPipeParam != NULL)
	{
		if (fabs(m_pPipeParam->dSize[0] - pparam->dSize[0]) < 1.e-6 && //D W
			fabs(m_pPipeParam->dSize[1] - pparam->dSize[1]) < 1.e-6 && //H 
			fabs(m_pPipeParam->dSize[2] - pparam->dSize[2]) < 1.e-6)   //t
		{
			bIsLastInfParamFit = true;
		}
	}

	if (!bIsLastInfParamFit)//不一致
	{
		//m_pPipeParam param2 
		AecHvac::DuctParam *pLParam = pparam;//param1
		if (!m_lstLastPipeParam.IsEmpty())
			pLParam = (AecHvac::DuctParam *)m_lstLastPipeParam.GetTail();

		//电缆沟设置分支
		//产生非等径弯头!
		AecHvac::DuctParam param;
		memcpy(&param, pparam, sizeof(AecHvac::DuctParam));

		//分支 但是高度必须相等!
		param.dSize[3] = pLParam->dSize[0];

		//高度必须相等!
		if (fabs(param.dSize[1] - pLParam->dSize[1]) < 1.e-6)
		{
			//电缆沟
			param.dSize[12] = pLParam->dSize[4];
			param.dSize[13] = pLParam->dSize[5];
			param.dSize[14] = pLParam->dSize[6];
			param.dSize[15] = pLParam->dSize[7];
			param.dSize[16] = pLParam->dSize[8];
			param.dSize[17] = pLParam->dSize[9];
			param.dSize[18] = pLParam->dSize[10];

			pFit->SetDuctParam(param);

			dLx = GetElbowLx(&param);
			dL = GetElbowL(&param);

			AcGeVector3d vtTmp = vtMaj;
			vtMaj = vtMin;
			vtMin = vtTmp;
		}
	}

	//弹出界面,选择弯头样式
	int nElbowStyle = 0;
	if (vtMaj.isParallelTo(AcGeVector3d::kZAxis) ||
		vtMin.isParallelTo(AcGeVector3d::kZAxis))
	{
		CAcModuleResourceOverride myResources;
		CWTXXDlg dlg;
		dlg.SetMajDir(vtMaj);
		dlg.SetMinDir(vtMin);
		if (IDOK == dlg.DoModal())
		{
			nElbowStyle = dlg.GetElbowStyle();
		}
	}

	if (pParam->m_app == WPipe::eTrench && m_bHasHolder)
	{
		pFit->SetXHolder(kLeft, m_lHolder);
		pFit->SetXHolder(kRight, m_rHolder);
	}

	pFit->GetSpecialtyData()->SetAt(KEY_ELBOWSTYLE, nElbowStyle);
	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pFit->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);
	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME,(int)eElbow);
	pFit->GetSpecialtyData()->SetAt(HELB_Type,(int)AecHvac::eIncline);
	pFit->GetSpecialtyData()->SetAt(KEY_MAJBR, vtMaj);
	pFit->GetSpecialtyData()->SetAt(KEY_MINBR, vtMin);

	AcGeVector3d vtNorm = vtMin.crossProduct(vtMaj);
	double dAngle = vtMin.angleTo(vtMaj,vtNorm);

	pFit->GetSpecialtyData()->SetAt(KEY_MID, ptMid);
	pFit->GetSpecialtyData()->SetAt(HELB_RadRatio, dRatio);
	pFit->GetSpecialtyData()->SetAt(PIPE_ELBOWANG,dAngle);
	pFit->GetSpecialtyData()->SetAt(PIPE_THICK, pparam->dSize[2]);
	pFit->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度

	AecInterface intf0,intf1;
	pFit->GetInterface(0,intf0);
	pFit->GetInterface(1,intf1);

	m_intf0 = intf0;
	m_intf1 = intf1;

	//添加本次到数据库
	AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
	m_intf0.idOwner = id;
	m_intf1.idOwner = id;

	AddUserData(id,pXDataMap,1);

	//记录接口到历史记录
	intf1.idOwner = id;
	if (m_pPipeJig != NULL) intf1.nType = m_pPipeJig->GetUndoGroupID();

	if (bInsertBeforLast)
	{
		if (m_arHistoryIntfs.GetSize() > 0)
		{
			AecInterface inf = m_arHistoryIntfs[m_arHistoryIntfs.GetSize() - 1];
			m_arHistoryIntfs.RemoveAt(m_arHistoryIntfs.GetSize() - 1);
			PushInterface(intf0);
			PushInterface(inf);
		}
		else
		{
			PushInterface(intf0);
		}
	}
	else
	{
		PushInterface(intf0);
	}

	AddUserData(id,pXDataMap,1);

	return id;
}

BOOL AecDbECableLine::ChangeEl(AECStatusRecord* pRec,double dNewEl,BOOL bCheckRec,double dRedElPos,AecHvac::DuctParam* pParamred)
{
	//dNewEl 为底部高,调整到中心标高
	dNewEl += m_pPipeParam->dSize[1] * 0.5;

	AcGeVector3d vtMaj,vtMin;
	if (GetLastInterface() != NULL)
	{
		vtMaj = GetLastInterface()->vtDir;
		vtMaj.normalize();
		vtMin = AcGeVector3d::kZAxis;

		if (dNewEl - m_pPipeParam->m_dEl < 1.e-6)
		{
			vtMin = -AcGeVector3d::kZAxis;
		}

		AcGePoint3d ptMid,ptSta,ptEnd,ptGeT,ptLast;

		double dRatio = m_pPipeParam->m_dRatio;
		double dLx = GetElbowLx(m_pPipeParam);
		double dL = GetElbowL(m_pPipeParam);

		//如果上段不是管子
		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,GetLastInterface()->idOwner,AcDb::kForWrite))
		{
			AecDbECableTray* pPipe = AecDbECableTray::cast(pEnt);
			if (pPipe == NULL)//不是管子
			{
				ptMid = GetLastInterface()->ptPos;
				ptSta = ptMid;
				ptMid += vtMaj * dL;
				ptLast = ptMid;
				ptEnd = ptMid;
				ptEnd.z = dNewEl;

				//创建立管...
				if (vtMaj.isParallelTo(AcGeVector3d::kZAxis))
				{
					double dAng = 0;//需要计算
					CreatePipe(ptSta, ptEnd, m_pPipeParam, dAng);
					pRec->SetAcquirePoint(ptEnd);
				}
			}
			else//改短上次管子
			{
				ptLast = GetLastInterface()->ptPos;
				if (ptLast.distanceTo(pPipe->EndPoint()) < 1.e-6)
				{
					ptEnd = pPipe->EndPoint();
					ptMid = ptEnd;
					ptEnd -= vtMaj * dL;

					ptGeT = pPipe->EndPoint();
					pPipe->SetEndPoint(ptEnd);
					ptLast = ptEnd;
				}
				else
				{
					vtMaj = pPipe->StartPoint() - pPipe->EndPoint();
					vtMaj.normalize();

					ptSta = pPipe->StartPoint();
					ptMid = ptSta;
					ptSta -= vtMaj * dL;

					ptGeT = pPipe->StartPoint();
					pPipe->SetStartPoint(ptSta);
					ptLast = ptSta;
				}
			}
			pEnt->close();
		}

		//压入当前param
		PushPipeParam();

		//1. 如果方向不同创建弯头
		if (!vtMaj.isParallelTo(vtMin))
		{
			//底部弯头
			AecHvac::DuctParam param;
			memcpy(&param,m_pPipeParam,sizeof(AecHvac::DuctParam));

			vtMaj.negate();
			CreateElbow(vtMaj,ptMid,vtMin,&param);

			if (m_intf0.vtDir.isParallelTo(vtMin) )
			{
				ptSta = m_intf0.ptPos;
			}
			else
			{
				ptSta = m_intf1.ptPos;
			}

			//顶部弯头
			ptMid.z = dNewEl;
			vtMin = vtMaj;
			vtMin.negate();
			vtMaj = -AcGeVector3d::kZAxis;
			if (dNewEl < m_pPipeParam->m_dEl)
				vtMaj.negate();

			//顶部不需要创建  2023-11-22 
			//CreateElbow(vtMaj,ptMid,vtMin,&param);

			if (m_intf0.vtDir.isParallelTo(vtMaj))
			{
				ptEnd = m_intf0.ptPos;
				ptLast = m_intf1.ptPos;
			}
			else
			{
				ptEnd = m_intf1.ptPos;
				ptLast = m_intf0.ptPos;
			}

			AcGeVector3d vtDirXY = vtMaj.isParallelTo(AcGeVector3d::kZAxis) ? vtMin : vtMaj;
			double dAng = AcGeVector3d::kXAxis.angleTo(vtDirXY,AcGeVector3d::kZAxis);

			if (vtMaj.isParallelTo(AcGeVector3d::kZAxis) ||
				vtMin.isParallelTo(AcGeVector3d::kZAxis))
				dAng += PI / 2.0;

			//2. 创建立管
			AecHvac::DuctParam paramT;
			memcpy(&paramT,m_pPipeParam,sizeof(AecHvac::DuctParam));
			paramT.m_vtNrom = vtMin;
			paramT.m_bCover = TRUE;

			ptEnd.z = dNewEl;
			CreatePipe(ptSta,ptEnd,&paramT,dAng);

			m_pPipeParam->m_dEl = dNewEl;

			//重新调整历史记录
			// //CreatePipe 已经加入最后管嘴 2023-11-22 去掉 
			//AecInterface inf = m_intf0;
			//inf.vtDir = vtMin;
			//inf.ptPos = ptLast;
			//PushInterface(inf);
			//pRec->SetAcquirePoint(ptLast);
			
			//调整本次状态点
			pRec->SetAcquirePoint(ptEnd);
		}
	}
	return TRUE;
}

BOOL AecDbECableLine::ChangeEl2(AECStatusRecord* pRec,AECStatusRecord* pRecLast,double dNewEl,
								BOOL bCheckRec,double dRedElPos,AecHvac::DuctParam* pParamred)
{
	//dNewEl 为底部高,调整到中心标高
	dNewEl += m_pPipeParam->dSize[1] * 0.5;

	ads_point pt[5];
	AcGePoint3d ptGe = pRecLast->GetAcquirePoint();
	double dSize = PixelToWcs(5);//5

	AcGePoint3d ptGeX[5];
	ptGeX[0] = ptGe;
	ptGeX[0] -= dSize * AcGeVector3d::kYAxis;
	ptGeX[0] -= dSize * AcGeVector3d::kXAxis;

	ptGeX[1] = ptGeX[0] + 2 * dSize * AcGeVector3d::kYAxis;
	ptGeX[2] = ptGeX[1] + 2 * dSize * AcGeVector3d::kXAxis;
	ptGeX[3] = ptGeX[0] + 2 * dSize * AcGeVector3d::kXAxis;
	ptGeX[4] = ptGeX[0];

	for (int i = 0;i < 5;i++)
	{
		acdbWcs2Ucs(asDblArray(ptGeX[i]),pt[i],false);
	}

	TCHAR szBuf[64];
	memset(szBuf,0,sizeof(szBuf));
	_tcscpy(szBuf, _T("AEC_DBCABTRY"));

	struct resbuf rb;
	rb.restype = 0;
	rb.resval.rstring = szBuf;
	rb.rbnext = NULL; 

	struct resbuf* pointlist; 
	pointlist = acutBuildList(RTPOINT, pt[0], RTPOINT, pt[1], 
		RTPOINT, pt[2], RTPOINT, pt[3], 0); 

	ads_name ss,ent;
	acedSSGet(_T("CP"),pointlist,NULL,&rb,ss);
	acutRelRb(pointlist);

	Adesk::Int32 lLen = 0;
	acedSSLength(ss,&lLen);

	AecHvac::DuctParam wparamMain;
	memcpy(&wparamMain,m_pPipeParam,sizeof(AecHvac::DuctParam));

	AcDbObjectId id;
	AcGePoint3d ptOn;
	if (lLen > 0)
	{
		acedSSName(ss,0,ent);

		acdbGetObjectId(id,ent);

		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead) )
		{
			AecDbECableTray* pWPipe = AecDbECableTray::cast(pEnt);
			if (pWPipe != NULL)
			{
				pWPipe->GetDuctParam(wparamMain);

				AcGePoint3d ptOn1 = pRec->GetAcquirePoint();
				AcDbLine ln(pWPipe->StartPoint(),pWPipe->EndPoint());
				ln.getClosestPointTo(ptOn1,ptOn);
				pRec->SetAcquirePoint(ptOn);
			}
			pEnt->close();
		}
	}
	acedSSFree(ss);

	bool bCreateTee = false;
	if ( ( wparamMain.dSize[0] - m_pPipeParam->dSize[0] ) > -1.e-6) //可能的创建三通,否则只创建立管
	{
		bCreateTee = true;
	}

	//创建立管
	AcGePoint3d ptSta,ptEnd;
	ptSta = pRec->GetAcquirePoint();

	if (bCreateTee)
	{
		if ( fabs(wparamMain.dSize[1] - m_pPipeParam->dSize[1]) < 1.e-6)
		{
			AcGeVector3d vtMin = AcGeVector3d::kZAxis;
			if (dNewEl - ptSta.z < 1.e-6)
			{
				vtMin = -AcGeVector3d::kZAxis;
			}
			AcGePoint3d ptMid = pRec->GetAcquirePoint();

			double dL = 0.0,dB = 0.0;
			double dLx = GetElbowLx(m_pPipeParam);
			dL = GetElbowL(m_pPipeParam);
			dB = dL;

			//创建三通
			AcDbEntity* pEnt = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite) )
			{
				AecDbECableTray* pWPipe = AecDbECableTray::cast(pEnt);
				if (pWPipe != NULL)
				{
					//对方断为两个管子
					SplitWPipe(ptMid,dL,pWPipe);

					AddTee(pWPipe,dL,ptMid,dB,vtMin);
					ptSta += vtMin * dB;
				}
				pEnt->close();
			}
		}
		else
		{
			acutPrintf(_T("\n选择的两桥架高度不同,不能创建三通!"));
		}
	}

	//3.创建立管
	ptEnd = ptSta;
	{
		ptEnd.z = dNewEl;

		//立管必须带盖子
		AecHvac::DuctParam param;
		memcpy(&param,m_pPipeParam,sizeof(AecHvac::DuctParam));
		param.m_bCover = TRUE;

		CreatePipe(ptSta,ptEnd,&param);

		m_pPipeParam->m_dEl = dNewEl;

		//调整本次状态点
		pRec->SetAcquirePoint(ptEnd);
	}
	return TRUE;
}

BOOL AecDbECableLine::ChangeEl3(AECStatusRecord* pRec,AcGePoint3d& ptThis)
{
	double dNewEl = ptThis.z;

	//dNewEl 为底部高,调整到中心标高
	dNewEl += m_pPipeParam->dSize[1] * 0.5;

	AcGeVector3d vtMaj,vtMin;
	if (GetLastInterface() != NULL)
	{
		vtMaj = GetLastInterface()->vtDir;
		vtMaj.normalize();
		vtMin = ptThis - GetLastInterface()->ptPos;

		vtMaj.normalize();
		vtMin.normalize();

		double dX = GetElbowL(m_pPipeParam);

		AcGePoint3d ptMid,ptSta,ptEnd,ptGeT,ptLast;

		//如果上段不是管子
		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,GetLastInterface()->idOwner,AcDb::kForWrite))
		{
			AecDbECableTray* pPipe = AecDbECableTray::cast(pEnt);
			if (pPipe == NULL)//不是管子
			{
				ptMid = GetLastInterface()->ptPos;
				ptMid += vtMaj * dX;
			}
			else//改短上次管子
			{
				ptLast = GetLastInterface()->ptPos;

				if (ptLast.distanceTo(pPipe->EndPoint()) < 1.e-6)
				{
					ptEnd = pPipe->EndPoint();
					ptMid = ptEnd;
					ptEnd -= vtMaj * dX;

					ptGeT = pPipe->EndPoint();
					pPipe->SetEndPoint(ptEnd);
				}
				else
				{
					vtMaj = pPipe->StartPoint() - pPipe->EndPoint();
					vtMaj.normalize();

					ptSta = pPipe->StartPoint();
					ptMid = ptSta;
					ptSta -= vtMaj * dX;

					ptGeT = pPipe->StartPoint();
					pPipe->SetStartPoint(ptSta);
				}
			}
			pEnt->close();
		}

		//压入当前param
		PushPipeParam();

		//1. 如果方向不同创建弯头->乙字弯结构
		if (!vtMaj.isParallelTo(vtMin))
		{
			vtMaj.negate();

			AecHvac::DuctParam param;
			memcpy(&param,m_pPipeParam,sizeof(AecHvac::DuctParam));

			double dTmp = param.dSize[0];
			param.dSize[0] = param.dSize[1];
			param.dSize[0] = dTmp;

			CreateElbow(vtMaj,ptMid,vtMin,&param);

			AcGeVector3d vtPipe = vtMaj;
			if (m_intf0.vtDir.isParallelTo(vtMin) )
			{
				ptSta = m_intf0.ptPos;
				vtPipe = m_intf0.vtDir;
			}
			else
			{
				ptSta = m_intf1.ptPos;
				vtPipe = m_intf1.vtDir;
			}

			//2. 创建斜管
			vtPipe.normalize();
			ptEnd = ptThis;
			ptEnd -= vtPipe * dX;
			CreatePipe(ptSta,ptEnd,m_pPipeParam);

			//在创建弯头
			vtMin = vtMaj;
			vtMin.negate();

			ptMid = ptThis;

			vtMaj = vtPipe;
			vtMaj.negate();

			CreateElbow(vtMaj,ptMid,vtMin,&param);

			if (m_intf0.vtDir.isParallelTo(vtMin) )
			{
				ptEnd = m_intf0.ptPos;
				PushInterface(m_intf0);
			}
			else
			{
				ptEnd = m_intf1.ptPos;
				PushInterface(m_intf1);
			}
		}

		m_pPipeParam->m_dEl = dNewEl;

		//调整本次状态点
		pRec->SetAcquirePoint(ptEnd);

		return TRUE;
	}
	return FALSE;
}

void AecDbECableLine::SetAngleWath(AcGePoint3d& ptCen,const AcGePoint3d& ptGeTo,const AcGeVector3d& vtDir/* = AcGeVector3d::kXAxis*/)
{
	if (m_pAngleWatch != NULL)
	{
		m_pAngleWatch->SetAngleWath(ptCen,ptGeTo,vtDir);
	}
}

void AecDbECableLine::SwitchAutoSnapOrF8()
{
	if (m_pAngleWatch != NULL)
	{
		m_pAngleWatch->SwitchAutoSnapOrF8();
	}
}

void AecDbECableLine::MoveAngWatchPosition()
{
	//导航表盘
	if (m_pPipeJig->GetTailStatusRec() != NULL && 
		m_pPipeJig->GetTailStatusRec()->GetStatusType() >= AECStatusRecord::kAngle &&
		m_pPipeJig->GetTailStatusRec()->GetStatusType() <= AECStatusRecord::kPoint)
	{
		AcGePoint3d ptGe,ptGe1;
		ptGe = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();
		ptGe1 = m_pPipeJig->m_pCurStaRec->GetAcquirePoint();

		AcGeVector3d vtDir;
		vtDir = m_pAngleWatch->m_vtDir;
		AecInterface* pLast = GetLastInterface();
		if (pLast != NULL)
		{
			vtDir = pLast->vtDir;
		}
		m_pAngleWatch->SetAngleWath(ptGe,ptGe1,vtDir);
	}
}

void AecDbECableLine::AngWatchTo(const AcGePoint3d& ptGeTo)
{
	if (m_pAngleWatch != NULL)
	{
		m_pAngleWatch->m_ptGeTo = ptGeTo;
	}
}

//画管线停止
BOOL AecDbECableLine::PipeFinished()
{
	return m_bStopCommand;
}

void AecDbECableLine::PopUpInterface(int nGroupID)
{
	while(m_arHistoryIntfs.GetSize() > 0)
	{
		if (m_arHistoryIntfs[m_arHistoryIntfs.GetSize() - 1].nType == nGroupID)
		{
			m_arHistoryIntfs.RemoveAt(m_arHistoryIntfs.GetSize() - 1);
		}
		else
		{
			break;
		}
	}

	//回退上次参数
	while (m_lstLastPipeParam.GetCount() > 0)
	{
		//回上次管道参数
		AecHvac::DuctParam* pLast = (AecHvac::DuctParam*)m_lstLastPipeParam.GetTail();
		if (pLast->m_nGroupID == nGroupID)
		{
			m_lstLastPipeParam.RemoveTail();
			DELETE_PTR(pLast);
		}
		else
		{
			memcpy(m_pPipeParam,pLast,sizeof(AecHvac::DuctParam));
			break;
		}
	}
}

void AecDbECableLine::PushPipeParam()
{
	AecHvac::DuctParam* pParam = new AecHvac::DuctParam;
	memcpy(pParam,m_pPipeParam,sizeof(AecHvac::DuctParam));
	pParam->m_nGroupID = m_pPipeJig->GetUndoGroupID();
	m_lstLastPipeParam.AddTail(pParam);
}

void AecDbECableLine::PushInterface(AecInterface& intf,BOOL bStartDragFromIt/* = FALSE*/)
{
	m_arHistoryIntfs.Add(intf);
	if (bStartDragFromIt)//拖出的源对象
	{
		m_idStartDragFrom = intf.idOwner;
	}
}

BOOL AecDbECableLine::CreateWPipe(AECStatusRecord* pRec,BOOL bMaybeAddTee/* = FALSE*/)
{
	AcGePoint3d ptGe,ptGe1;

	AecDbECableTray* pWpipe = new AecDbECableTray;
	AecDbObjXDataMap* pXDataMap = pWpipe->GetSpecialtyData();

	pWpipe->SetDuctParam(m_pPipeParam);
	pWpipe->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pWpipe->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);

	//设置图层
	AecHvac::DuctParam *pParam = m_pPipeParam;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, m_pPipeParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, m_pPipeParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, m_pPipeParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	pXDataMap->SetAt(PIPE_CENTLAY,idCenLay);
	pXDataMap->SetAt(PIPE_OUTDLAY,idOutLay);
	pXDataMap->SetAt(PIPE_SINGLAY,idSingle);

	pWpipe->SetDoubleLayer(idOutLay);
	pWpipe->SetSingleLayer(idSingle);
	pWpipe->SetCenterLayer(idCenLay);
	pWpipe->setLayer(idOutLay);

	ptGe = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();
	ptGe1 = pRec->GetAcquirePoint();

#//ifndef _DEBUG_WAS_DEFINED
//	acutPrintf(_T("\n%.3f-%.3f"), ptGe.x, ptGe.y);
//	acutPrintf(_T("\n%.3f-%.3f"), ptGe1.x, ptGe1.y);
//#endif

	//第一次对齐即可
	AcGeVector3d vtAg(0,0,0);
	if (m_arHistoryIntfs.GetSize() == 0)
	{
		vtAg = ptGe1 - ptGe;
		vtAg.normalize();
		
		switch(m_pPipeParam->m_nAlign)
		{
		case 0://底部左
			{
				vtAg.rotateBy(-PI / 2.0,AcGeVector3d::kZAxis);
				vtAg *= 0.5 * m_pPipeParam->dSize[0];
				break;
			}
		case 1://底部中
			{
				vtAg.set(0,0,0);
				break;
			}
		case 2://底部右
			{
				vtAg.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
				vtAg *= 0.5 * m_pPipeParam->dSize[0];
				break;
			}
		default:
			break;
		}
		ptGe += vtAg;
		m_pPipeJig->GetTailStatusRec()->SetAcquirePoint(ptGe);
	}

	pWpipe->SetStartPoint( ptGe );
	pWpipe->SetEndPoint( ptGe1 );
	AcGeVector3d vtDir = ptGe1 - ptGe;
	vtDir.normalize();

	//法向量,水平桥架
	AcGeVector3d vtWDir = vtDir;
	vtWDir.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

	AcGeVector3d vtNorm = vtDir.crossProduct(vtWDir);
	pWpipe->GetSpecialtyData()->SetAt(KEY_NORMAL,vtNorm);
	m_pPipeParam->m_vtNrom = vtNorm;

	if (pParam->m_app == WPipe::eTrench && m_bHasHolder)
	{
		pWpipe->SetXHolder(kLeft, m_lHolder);
		pWpipe->SetXHolder(kRight, m_rHolder);
	}

	//pWpipe->ReCreateByXDataMap();
	AcDbObjectId id = CoreTools::AddToModelSpace(pWpipe);

	AddUserData(id,pXDataMap,0);

	//记录接口到历史记录
	AecInterface intf;
	intf.ptPos = ptGe1;
	intf.vtDir = vtDir;
	intf.idOwner = id;
	PushInterface(intf);

	if (bMaybeAddTee) //开始端或末端考虑添加三通的可能性
	{
		//1. 可能的与其他管子在开始端合成三通
		MaybeAddTeeConnectToThis(ptGe,vtDir,id,0);

		//2. 可能的与其他管子在末端合成三通,从而结束命令
		if ( MaybeAddTeeConnectToThis(ptGe1,vtDir,id,1) )
		{
			//结束命令
			m_bStopCommand = TRUE;
		}

		//1.可能与其他的管子在中间端合成四通的可能性
		MaybeAddCrossConnectToThis(ptGe,ptGe1,id);
	}
	else //末端或中间部分添加三通或四通的可能性
	{
		//1.可能与其他的管子在中间端合成四通的可能性
		MaybeAddCrossConnectToThis(ptGe,ptGe1,id);

		//2. 可能的与其他管子在末端合成三通,从而结束命令
		if ( MaybeAddTeeConnectToThis(ptGe1,vtDir,id,1) )
		{
			//结束命令
			m_bStopCommand = TRUE;
		}
	}
	return TRUE;
}

BOOL AecDbECableLine::CreatePipe(AcGePoint3d ptSta,AcGePoint3d ptEnd,AecHvac::DuctParam* pPipeParam,double dSectRot/* = 0.0*/)
{
	AecDbECableTray* pWpipe = new AecDbECableTray;
	AecDbObjXDataMap* pXDataMap = pWpipe->GetSpecialtyData();

	//设置图层
	AecHvac::DuctParam *pParam = pPipeParam;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, m_pPipeParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, m_pPipeParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, m_pPipeParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	pXDataMap->SetAt(PIPE_CENTLAY,idCenLay);
	pXDataMap->SetAt(PIPE_OUTDLAY,idOutLay);
	pXDataMap->SetAt(PIPE_SINGLAY,idSingle);

	pWpipe->SetDoubleLayer(idOutLay);
	pWpipe->SetSingleLayer(idSingle);
	pWpipe->SetCenterLayer(idCenLay);
	pWpipe->setLayer(idOutLay);

	// 增加参数 [10/24/2016 Rex]
	if(g_pMapData != NULL)
	{
		CMapStringToString mapData;
		CString sKey,sVal;
		for (POSITION ps = g_pMapData->GetStartPosition();ps != NULL;)
		{
			g_pMapData->GetNextAssoc(ps,sKey,sVal);
			pXDataMap->SetAt(sKey,sVal);
		}
	}

	if (fabs(dSectRot) > 1.e-6)
		pWpipe->SetSectionRotation(dSectRot);

	pWpipe->SetDuctParam(pPipeParam);
	pWpipe->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pWpipe->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);

	pWpipe->SetStartPoint( ptSta );
	pWpipe->SetEndPoint( ptEnd );
	pXDataMap->SetAt(KEY_NORMAL,pPipeParam->m_vtNrom);
	
	if ( fabs(ptSta.z - ptEnd.z) > 1.e-6)
	{
		pWpipe->GetSpecialtyData()->SetAt(KEY_DRAWGRAD,TRUE);
	}

	if (pParam->m_app == WPipe::eTrench && m_bHasHolder)
	{
		pWpipe->SetXHolder(kLeft, m_lHolder);
		pWpipe->SetXHolder(kRight, m_rHolder);
	}

	AcDbObjectId id = CoreTools::AddToModelSpace(pWpipe);

	AddUserData(id,pXDataMap,0);

	AcGeVector3d vtDir = ptEnd - ptSta;

	//记录接口到历史记录
	AecInterface intf;
	intf.ptPos = ptEnd;
	intf.vtDir = vtDir;
	intf.idOwner = id;
	PushInterface(intf);

	return TRUE;
}

BOOL AecDbECableLine::ExtendLastWPipe(AECStatusRecord* pRec)
{
	int nLen = m_arHistoryIntfs.GetSize();
	if (nLen == 0)
		return FALSE;

	AecInterface& intf = m_arHistoryIntfs[nLen - 1];
	AcDbObjectId id = intf.idOwner;

	AcDbEntity* pEnt = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite))
	{
		AecDbECableTray* pDbWpipe = AecDbECableTray::cast(pEnt);
		if (pDbWpipe != NULL)
		{
			AcGePoint3d ptGe = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();
			AcGePoint3d ptGe1 = pRec->GetAcquirePoint();
			AcGeVector3d vtThis = ptGe1 - ptGe;
			AcGePoint3d ptGeT;
			int nPos = 0;
			AcGeVector3d vt = pDbWpipe->EndPoint() - pDbWpipe->StartPoint();
			if (vtThis.isCodirectionalTo(vt))
			{
				ptGeT = pDbWpipe->EndPoint();
				pDbWpipe->SetEndPoint(pRec->GetAcquirePoint());
				nPos = 1;
			}
			else
			{
				ptGeT = pDbWpipe->StartPoint();
				pDbWpipe->SetStartPoint(pRec->GetAcquirePoint());
			}
			//pDbWpipe->UpdateInterfaceRec(ptGeT,pRec->GetAcquirePoint());

			//先关闭
			pEnt->close();

			//1.可能与其他的管子在中间端合成四通的可能性
			MaybeAddCrossConnectToThis(ptGe,ptGe1,id);

			//2. 可能的与其他管子在末端合成三通,从而结束命令
			AcGeVector3d vtDir = ptGe1 - ptGe;
			if ( MaybeAddTeeConnectToThis(ptGe1,vtDir,id,nPos) )
			{
				//结束命令
				m_bStopCommand = TRUE;
			}
			intf.ptPos = pRec->GetAcquirePoint();
			PushInterface(intf,FALSE);
			return TRUE;
		}

		AecDbEcFitting* pDbFit = AecDbEcFitting::cast(pEnt);
		if (pDbFit != NULL) //上次是管件,本次创建管子
		{
			AecDbObjXDataMap* pXDataMap = pDbFit->GetSpecialtyData();

			int nVal = 0;
			pXDataMap->GetAt(KEY_RUNTIME,nVal);
			EFittingType eKind = (EFittingType)nVal;

			//可能的改上次弯头为三通,当方向不一致
			if (nVal == eElbow)
			{
				AcGeVector3d vtIntf = intf.vtDir;
				AcGePoint3d ptGe = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();
				AcGePoint3d ptGe1 = pRec->GetAcquirePoint();
				AcGeVector3d vtThis = ptGe1 - ptGe;

				if (vtThis.isParallelTo(vtIntf))
				{
					if (!vtThis.isCodirectionalTo(vtIntf)) // 反向,改弯头为三通
					{
						//判断弯头是否是90度弯头
						double dAng = 0.0;
						pXDataMap->GetAt(PIPE_ELBOWANG,dAng);

						if ( fabs( dAng - 90.0 ) < 1.e-6) //是90 度
						{
							AecHvac::DuctParam data;
							memset(&data,0,sizeof(AecHvac::DuctParam));
							pDbFit->GetDuctParam(data);

							//获取另一方向
							double dDn = data.dSize[0];
							AcGeVector3d vt1,vt2;
							pXDataMap->GetAt(KEY_MAJBR,vt1);
							pXDataMap->GetAt(KEY_MINBR,vt2);
							
							AcGeVector3d vtMin;
							if (vt1.isParallelTo(vtIntf))   // 本位置
							{
								vtMin = vt2;
							}
							else
							{
								vtMin = vt1;
								vtMin.negate();
							}

							AcGePoint3d ptGeM;
							pXDataMap->GetAt(KEY_MID,ptGeM);
							ChangeElbowToTree(pDbFit,vtThis,ptGeM,vtMin,dDn,pRec);
						}
					}
				}
			}
			else if(nVal == eTee)
			{
				AcGeVector3d vtIntf = intf.vtDir;

				AcGePoint3d ptGe = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();
				AcGePoint3d ptGe1 = pRec->GetAcquirePoint();
				AcGeVector3d vtThis = ptGe1 - ptGe;

				AecInterface inf2,inf0;
				pDbFit->GetInterface(2,inf2);
				pDbFit->GetInterface(0,inf0);
				AcGeVector3d vtInf2 = inf2.vtDir;
				AcGeVector3d vtInf0 = inf0.vtDir;

				if (vtInf0.isPerpendicularTo(vtInf2)) //正十字三通
				{
					//如果是支管拉,才可能创建四通;
					if (vtThis.isParallelTo(vtIntf) && vtIntf.isParallelTo(vtInf2) )
					{
						if (!vtThis.isCodirectionalTo(vtIntf)) // 反向,改三通为四通
						{
							//直接改三通为四通
							ChangeTeeToCross(pDbFit,vtInf0,vtInf2,pRec);
						}
					}
				}
			}

			pEnt->close();
			return CreateWPipe(pRec);
		}

		AecDbEwEquipment* pWEqu = AecDbEwEquipment::cast(pEnt);
		if (pWEqu != NULL)
		{
			pEnt->close();
			return CreateWPipe(pRec);
		}
		pEnt->close();
		intf.ptPos = pRec->GetAcquirePoint();
		return TRUE;
	}
	return FALSE;
}

BOOL AecDbECableLine::IsLastParamAndInfFit()
{
	int nLen = m_arHistoryIntfs.GetSize();
	if (nLen == 0)
		return FALSE;

	if (m_lstLastPipeParam.IsEmpty())
		return FALSE;

	AecHvac::DuctParam *pLParam = m_pPipeParam;

	AecInterface intf = m_arHistoryIntfs[nLen - 1];
	AcDbObjectId id = intf.idOwner;

	AecHvac::DuctParam param;
	memset(&param, 0, sizeof(AecHvac::DuctParam));

	AcDbEntity *pEnt = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
	{
		AecDbEcFitting *pFitLast = AecDbEcFitting::cast(pEnt);
		if (pFitLast != NULL)
		{
			pFitLast->GetDuctParam(param);
		}

		AecDbECableTray *pWPipe = AecDbECableTray::cast(pEnt);
		if (pWPipe != NULL)
		{
			pWPipe->GetDuctParam(param);
		}
		pEnt->close();
	}

	if ( fabs(pLParam->dSize[0] - param.dSize[0]) < 1.e-6 && //D W
		 fabs(pLParam->dSize[1] - param.dSize[1]) < 1.e-6 && //H 
		 fabs(pLParam->dSize[2] - param.dSize[2]) < 1.e-6)   //t
	{
		return TRUE;//相等
	}
	return FALSE;
}

BOOL AecDbECableLine::CreateElbowAndPipe(AECStatusRecord* pRec, const EFittingType &type/* = eElbow*/)
{
	int nLen = m_arHistoryIntfs.GetSize();
	if (nLen == 0)
		return FALSE;

	AecInterface intf;
	intf = m_arHistoryIntfs[nLen - 1];
	AcDbObjectId id = intf.idOwner;

	AcGePoint3d ptCur = pRec->GetAcquirePoint();
	AcGePoint3d ptGeM = m_pPipeJig->GetTailStatusRec()->GetAcquirePoint();

	AcGeVector3d vtMaj,vtMin,vtPipe;
	vtMaj = intf.vtDir;
	vtMaj.normalize();
	vtMaj.negate();
	vtMin = ptCur - ptGeM;
	vtMin.normalize();

	AcGeVector3d vtNom = vtMin.crossProduct(vtMaj);

	//弹出界面,选择弯头样式
	int nElbowStyle = 0;
	//影响绘制效率
	/*if (vtMin.isParallelTo(AcGeVector3d::kZAxis) ||
		 vtMaj.isParallelTo(AcGeVector3d::kZAxis ) )
	{
		CAcModuleResourceOverride myResources;
		CWTXXDlg dlg;
		dlg.SetMajDir(vtMaj);
		dlg.SetMinDir(vtMin);
		if (IDOK == dlg.DoModal())
		{
			nElbowStyle = dlg.GetElbowStyle();
		}
	}*/

	//设置图层
	AecHvac::DuctParam *pParam = m_pPipeParam;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, pParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, pParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, pParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	AecDbEcFitting* pFit = new AecDbEcFitting;
	AecDbObjXDataMap* pXDataMap = pFit->GetSpecialtyData();

	pFit->setLayer(idOutLay);
	pFit->SetDoubleLayer(idOutLay);
	pFit->SetCenterLayer(idCenLay);
	pFit->SetCenterLayer(idCenLay);

	BOOL bIsLastInfParamFit = FALSE;
	if (nLen > 0 && !m_lstLastPipeParam.IsEmpty())
	{
		//并且和上次参数一致
		bIsLastInfParamFit = IsLastParamAndInfFit();
	}

	//末端接口
	pFit->SetDuctParam(*m_pPipeParam);
	double dLx = GetElbowLx(m_pPipeParam);
	double dL = GetElbowL(m_pPipeParam);

	if (!bIsLastInfParamFit)//不一致
	{
		AecHvac::DuctParam *pLParam = m_pPipeParam;
		if (!m_lstLastPipeParam.IsEmpty())
			pLParam = (AecHvac::DuctParam *)m_lstLastPipeParam.GetTail();

		//电缆沟设置分支
		//产生非等径弯头!
		AecHvac::DuctParam param;
		memcpy(&param, m_pPipeParam, sizeof(AecHvac::DuctParam));

		//分支 但是高度必须相等!
		param.dSize[3] = pLParam->dSize[0];

		//高度必须相等!
		if (fabs(param.dSize[1] - pLParam->dSize[1]) < 1.e-6)
		{
			//电缆沟
			param.dSize[12] = pLParam->dSize[4];
			param.dSize[13] = pLParam->dSize[5];
			param.dSize[14] = pLParam->dSize[6];
			param.dSize[15] = pLParam->dSize[7];
			param.dSize[16] = pLParam->dSize[8];
			param.dSize[17] = pLParam->dSize[9];
			param.dSize[18] = pLParam->dSize[10];

			pFit->SetDuctParam(param);

			dLx = GetElbowLx(&param);
			dL = GetElbowL(&param);
		}
	}

	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pFit->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);
	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME,(int)eElbow);
	pFit->GetSpecialtyData()->SetAt(HELB_Type,(int)AecHvac::eIncline);
	pFit->GetSpecialtyData()->SetAt(KEY_MAJBR, vtMaj);
	pFit->GetSpecialtyData()->SetAt(KEY_MINBR, vtMin);
	pFit->GetSpecialtyData()->SetAt(KEY_ELBOWSTYLE, nElbowStyle);

	double dAngle = vtMin.angleTo(vtMaj,vtNom);
	pFit->GetSpecialtyData()->SetAt(KEY_MID, ptGeM);
	pFit->GetSpecialtyData()->SetAt(HELB_RadRatio, m_pPipeParam->m_dRatio);
	pFit->GetSpecialtyData()->SetAt(PIPE_ELBOWANG,dAngle);
	pFit->GetSpecialtyData()->SetAt(PIPE_THICK, m_pPipeParam->dSize[2]);
	pFit->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度

	//改变上次intf 的末端点
	AecInterface intf0,intf1;
	pFit->GetInterface(0,intf0);
	pFit->GetInterface(1,intf1);
	AcGeVector3d vtMove = vtMaj;
	vtMove.normalize();
	AcGePoint3d ptGeT;

	//判断id 是管件
	AcDbEntity* pEnt = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead))
	{
		AecDbEcFitting* pFitLast = AecDbEcFitting::cast(pEnt);
		if (pFitLast != NULL)
		{
			double dMove = 0.0;
			if (intf.vtDir.isParallelTo(intf0.vtDir))
			{
				dMove = intf.ptPos.distanceTo(intf0.ptPos);
				vtMove = intf.vtDir;
				vtMove.normalize();
				vtMove *= dMove;
				ptGeM += vtMove;
			}
			else
			{
				dMove = intf.ptPos.distanceTo(intf1.ptPos);
				vtMove = intf.vtDir;
				vtMove.normalize();
				vtMove *= dMove;
				ptGeM += vtMove;
			}

			AcGeMatrix3d xformMove;
			xformMove.setToTranslation(vtMove);
			pFit->transformBy(xformMove);

			pFit->GetInterface(0,intf0);
			pFit->GetInterface(1,intf1);
			vtMove = vtMaj;
			vtMove.normalize();
		}
		pEnt->close();
	}

	if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite))
	{
		// 如果上次是管子，则改变上次管子的终点
		AecDbECableTray* pWPipe = AecDbECableTray::cast(pEnt);
		if (pWPipe != NULL)
		{
			AcGeVector3d vtPipe = pWPipe->EndPoint() - pWPipe->StartPoint();
			if (intf0.vtDir.isParallelTo(vtPipe))
			{
				//距离那个点近, 则修改哪个点
				double dDis1 = ptGeM.distanceTo(pWPipe->StartPoint());
				double dDis2 = ptGeM.distanceTo(pWPipe->EndPoint());
				if (dDis1 <  dDis2)
				{
					ptGeT = pWPipe->StartPoint();
					pWPipe->SetStartPoint(intf0.ptPos);
				}
				else
				{
					ptGeT = pWPipe->EndPoint();
					pWPipe->SetEndPoint(intf0.ptPos);
				}
			}

			if (intf1.vtDir.isParallelTo(vtPipe))
			{
				//距离那个点近, 则修改哪个点
				double dDis1 = ptGeM.distanceTo(pWPipe->StartPoint());
				double dDis2 = ptGeM.distanceTo(pWPipe->EndPoint());
				if (dDis1 <  dDis2)
				{
					ptGeT = pWPipe->StartPoint();
					pWPipe->SetStartPoint(intf1.ptPos);
				}
				else
				{
					ptGeT = pWPipe->EndPoint();
					pWPipe->SetEndPoint(intf1.ptPos);
				}
			}

			//如果上次是立管子,本次水平
			vtPipe = pWPipe->GetTailDir();
			if (vtPipe.isParallelTo(AcGeVector3d::kZAxis))
			{
				AcGeLine3d ln3d(AcGePoint3d::kOrigin,vtMin);
				if (ln3d.isParallelTo(AcGePlane::kXYPlane))
				{
					//
					double dAng = AcGeVector3d::kXAxis.angleTo(vtMin,AcGeVector3d::kZAxis);
					pWPipe->SetSectionRotation(PI / 2.0 + dAng);
				}
			}
		}

		AecDbEcFitting* pDbFit = AecDbEcFitting::cast(pEnt);
		AecDbEwEquipment* pDbWEqu = AecDbEwEquipment::cast(pEnt);
		if (pDbFit != NULL || pDbWEqu != NULL) //如果是管件或设备元件,则加入的弯头需要调整M点,因为上次对象不可更改接口点
		{
			AcGeVector3d vtPipe = intf.vtDir;
			if (intf0.vtDir.isParallelTo(vtPipe))
			{
				vtMove = intf.ptPos - intf0.ptPos;
			}
			if (intf1.vtDir.isParallelTo(vtPipe))
			{
				vtMove = intf.ptPos - intf1.ptPos;
			}

			ptGeM += vtMove;
			pXDataMap->SetAt(KEY_MID,ptGeM);

			pFit->GetInterface(0,intf0);
			pFit->GetInterface(1,intf1);
		}
		pEnt->close();
	}

	if (pParam->m_app == WPipe::eTrench && m_bHasHolder)
	{
		pFit->SetXHolder(kLeft, m_lHolder);
		pFit->SetXHolder(kRight, m_rHolder);
	}

	//添加本次到数据库
	id = CoreTools::AddToModelSpace(pFit);

	AddUserData(id,pXDataMap,1);

	//创建余下的管子
	AcGePoint3d ptSta,ptEnd;
	if (intf0.vtDir.isParallelTo(vtMin))
	{
		ptSta = intf1.ptPos;
		ptEnd = intf0.ptPos;
	}
	if (intf1.vtDir.isParallelTo(vtMin))
	{
		ptSta = intf0.ptPos;
		ptEnd = intf1.ptPos;
	}

	//记录弯头末接口到历史记录
	intf.ptPos = ptEnd;
	intf.vtDir = vtMin;
	intf.idOwner = id;
	PushInterface(intf);

	ptGeT = pRec->GetAcquirePoint();
	ptGeT += vtMove;
	pRec->SetAcquirePoint(ptGeT);

	//校正
	AcGePoint3d ptTemp;
	AcDbLine ln;
	ln.setStartPoint(ptEnd);
	ptTemp = ptEnd + 1000.0 * vtMin;
	ln.setEndPoint(ptTemp);
	ln.getClosestPointTo(ptGeT,ptGeT,Adesk::kTrue);
	pRec->SetAcquirePoint(ptGeT);

	//创建余下管子,并插入虚拟状态记录
	AECStatusRecord* pRecMid = new AECStatusRecord;
	pRecMid->CopyFrom(pRec);
	pRecMid->SetAcquirePoint(ptEnd);
	m_pPipeJig->PushBackStatusRec(pRecMid);

	CreateWPipe(pRec);

	return TRUE;
}

BOOL AecDbECableLine::MaybeAddTeeConnectToThis(AcGePoint3d& ptGe,AcGeVector3d& vtDir,AcDbObjectId id,int nPos)
{
	AcDbObjectId idLay1,idLay2;
	AcDbEntity* pEnt1 = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt1,id,AcDb::kForRead))
	{
		idLay1 = pEnt1->layerId();
		pEnt1->close();
	}
	else
	{
		return FALSE;
	}

	//以ptGe的,以管子公称直径为搜索
	ads_point pt[5];
	vtDir.normalize();
	AcGeVector3d vtV = vtDir;
	vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

	AcGePoint3d ptGeT = ptGe;
	ptGeT = ptGe + m_pPipeParam->dSize[0] * 0.5 * vtDir;
	ptGeT += m_pPipeParam->dSize[0] * 0.5 * vtV;

	AcGePoint3d ptGeX[5];
	ptGeX[0] = ptGeT;
	ptGeX[1] = ptGeX[0] - m_pPipeParam->dSize[0] * vtDir;
	ptGeX[2] = ptGeX[1] - m_pPipeParam->dSize[0] * vtV;
	ptGeX[3] = ptGeX[0] - m_pPipeParam->dSize[0] * vtV;
	ptGeX[4] = ptGeX[0];
	for (int i = 0;i < 5;i++)
	{
		acdbWcs2Ucs(asDblArray(ptGeX[i]),pt[i],false);
	}

	TCHAR szBuf[64];
	memset(szBuf,0,sizeof(szBuf));
	_tcscpy(szBuf, _T("AEC_DBCABTRY"));

	struct resbuf rb;
	rb.restype = 0;
	rb.resval.rstring = szBuf;
	rb.rbnext = NULL; 

	struct resbuf* pointlist; 
	pointlist = acutBuildList(RTPOINT, pt[0], RTPOINT, pt[1], 
		RTPOINT, pt[2], RTPOINT, pt[3], 0); 

	ads_name ss,ent;
	acedSSGet(_T("CP"),pointlist,NULL,&rb,ss);
	acutRelRb(pointlist);

	Adesk::Int32 lLen = 0;
	acedSSLength(ss,&lLen);

	double dTemp = 0.0;
	CString sSQL,sTemp;
	AcDbObjectId idT;
	AcDbEntity* pEnt = NULL;
	AcGeVector3d vtPipe;
	AcGePoint3d ptMid,ptTemp1,ptTemp2;

	BOOL bModified = FALSE;
	for (long i = 0;i < lLen;i++)
	{
		acedSSName(ss,i,ent);
		acdbGetObjectId(idT,ent);
		if (idT == id) continue;

		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,idT,AcDb::kForWrite))
		{
			AecDbECableTray* pWPipe = AecDbECableTray::cast(pEnt);
			if (pWPipe != NULL)
			{
				//判断是否同系统
				idLay2 = pWPipe->layerId();
				if (idLay1 != idLay2)
				{
					pEnt->close();
					continue;
				}

				AecHvac::DuctParam data;
				pWPipe->GetDuctParam(data);
				if (data.m_app != m_pPipeParam->m_app)
				{
					pEnt->close();
					continue;
				}

				vtPipe = pWPipe->EndPoint() - pWPipe->StartPoint();
				vtPipe.normalize();
				if (!vtPipe.isParallelTo(vtDir))
				{
					//且两管子中心线能相交
					AcGeLine3d ln1(pWPipe->EndPoint(),vtPipe);
					AcGeLine3d ln2(ptGe,vtDir);

					double dDn = m_pPipeParam->dSize[0];
					pWPipe->GetSpecialtyData()->GetAt(KEY_SIZE1,dDn);

					if (ln1.intersectWith(ln2,ptMid))
					{
						double dL = GetElbowL(m_pPipeParam);
						double dS = dL;

						//也可能加弯头,ptMid的两头有一在管子外
						ptTemp1 = ptMid + vtPipe * dL;
						ptTemp2 = ptMid - vtPipe * dL;

						AcGeLineSeg3d lineGe(pWPipe->StartPoint(),pWPipe->EndPoint());
						BOOL bAddTee = TRUE;
						if ( !lineGe.isOn(ptTemp1) || !lineGe.isOn(ptTemp2) )
						{
							if ( fabs(dDn - m_pPipeParam->dSize[0]) < 1.e-6) //==DN
							{
								pEnt->close();
								bAddTee = FALSE;
								if ( AddElbow(idT,ptMid,id))
								{
									bModified = TRUE;
								}
								return bModified;
							}
							else// 只能加三通
							{
								bAddTee = TRUE;
							}
						}

						if (bAddTee)
						{
							AecHvac::DuctParam paramMj;
							pWPipe->GetDuctParam(paramMj);
							dL = GetElbowL(&paramMj);
							dS = dL;

							//对方断为两个管子
							SplitWPipe(ptMid,dL,pWPipe);

							if (nPos == 1)
								vtDir.negate();

							//改变this管子的位置
							ptGe = ptMid + dS * vtDir;
							ModifyWPipe(ptGe,id,nPos);

							//添加三通,继承pWPipe属性
							AddTee(pWPipe,dL,ptMid,dS,vtDir);
						}
						bModified = TRUE;
						
						acedSSFree(ss);
						pEnt->close();
						return bModified;
					}
				}
				else //平行,是否可以融合
				{
					//规格相同, 且不是从夹点拖出的命令
					if (m_idStartDragFrom != id)
					{
						double dDn = 0.0;
						pWPipe->GetSpecialtyData()->GetAt(KEY_SIZE1,dDn);

						if (fabs(dDn - m_pPipeParam->dSize[0]) < 1.e-3)//公称相同
						{
							if ( fabs(pWPipe->EndPoint().z - m_pPipeParam->m_dEl) < 1.e-3)//等标高
							{
								AcGePoint3d ptEnd = pWPipe->EndPoint();
								AcGePoint3d ptSta = pWPipe->StartPoint();
								if (!vtPipe.isCodirectionalTo(vtDir))
								{
									AcGePoint3d ptTemp = ptSta;
									ptSta = ptEnd;
									ptEnd = ptTemp;
								}

								//删除原来的管子
								pEnt->erase();

								//改变this管子的位置
								ModifyWPipe( nPos == 0 ? ptSta : ptEnd,id,nPos);

								bModified = TRUE;
							}
						}
					}
				}
			}
			pEnt->close();
		}
	}
	acedSSFree(ss);
	return bModified;
}

typedef struct Point_ID
{
	AcDbObjectId id;
	AcGePoint3d  ptInt;
	AcDbCurve*   pCurve;
}POINT_ID;

static bool ComparePointID(Point_ID& pt1,Point_ID& pt2)
{
	double dP1 = 0.0,dP2 = 0.0;
	pt1.pCurve->getParamAtPoint(pt1.ptInt,dP1);
	pt1.pCurve->getParamAtPoint(pt2.ptInt,dP2);

	if (dP1 - dP2 < 1.e-6)
	{
		return true;//up sort
	}
	return false;//down sort
}

BOOL AecDbECableLine::MaybeAddCrossConnectToThis(AcGePoint3d ptFr,AcGePoint3d ptTo,AcDbObjectId id)
{
	AcDbObjectId idLay1,idLay2;
	AcDbEntity* pEnt1 = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt1,id,AcDb::kForRead))
	{
		idLay1 = pEnt1->layerId();
		pEnt1->close();
	}
	else
	{
		return FALSE;
	}

	//等标高的情况下
	if (fabs(ptFr.z - ptTo.z) > 1.0)
	{
		return FALSE;
	}

	//id 的范围内选择实体,只考虑XY 面,其他三维单加四通
	AcGePoint3d ptGe[4];
	AcGeVector3d vtDir = ptTo - ptFr;
	AcGeVector3d vtV = vtDir;
	vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
	vtV.normalize();
	vtDir.normalize();

	//四通的主支 DN 相同
	double dM = 0.0,dB = 0.0;
	double dL = GetElbowL(m_pPipeParam);

	dM = dL;
	dB = dL;

	//选择范围缩小, 至少长度超过四通的长度
	ptFr += m_pPipeParam->dSize[0] * 2.0 * vtDir;
	ptTo -= m_pPipeParam->dSize[0] * 2.0 * vtDir;

	ptGe[0] = ptFr;
	ptGe[0] += vtV * m_pPipeParam->dSize[0] * 0.8;
	ptGe[1] = ptTo;
	ptGe[1] += vtV * m_pPipeParam->dSize[0] * 0.8;
	ptGe[2] = ptGe[1] - vtV * 1.6 * m_pPipeParam->dSize[0];
	ptGe[3] = ptGe[0] - vtV * 1.6 * m_pPipeParam->dSize[0];

	ads_point pt[4];
	for (int i = 0;i < 4;i++)
	{
		acdbWcs2Ucs(asDblArray(ptGe[i]),pt[i],false);
	}

	TCHAR szBuf[64];
	memset(szBuf,0,sizeof(szBuf));
	_tcscpy(szBuf, _T("AEC_DBCABTRY"));

	struct resbuf rb;
	rb.restype = 0;
	rb.resval.rstring = szBuf;
	rb.rbnext = NULL; 

	struct resbuf* pointlist = NULL; 
	pointlist = acutBuildList(RTPOINT, pt[0], RTPOINT, pt[1], 
		RTPOINT, pt[2], RTPOINT, pt[3], 0); 

	ads_name ss,ent;
	acedSSGet(_T("CP"),pointlist,NULL,&rb,ss);
	acutRelRb(pointlist);

	Adesk::Int32 lLen = 0;
	acedSSLength(ss,&lLen);

	AcDbObjectId idT;
	AcDbEntity* pEnt = NULL;
	AcGeVector3d vtDir2;

	AcDbLine line;
	line.setStartPoint(ptFr);
	line.setEndPoint(ptTo);

	AcGeLineSeg3d line1;
	line1.set(ptFr,ptTo);

	AcGeLineSeg3d line2;
	double dDN = 0.0;
	std::vector<Point_ID> vtPtids;

	for ( i = 0;i < lLen;i++)
	{
		acedSSName(ss,i,ent);
		acdbGetObjectId(idT,ent);
		if (idT == id) continue;

		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,idT,AcDb::kForRead))
		{
			idLay2 = pEnt->layerId();
			if (idLay1 != idLay2)
			{
				pEnt->close();
				continue;
			}

			AecDbECableTray* pWPipe = AecDbECableTray::cast(pEnt);
			if (pWPipe != NULL)
			{
				AecHvac::DuctParam data;
				memset(&data,0,sizeof(AecHvac::DuctParam));
				pWPipe->GetDuctParam(data);

				if (data.m_app != m_pPipeParam->m_app)
				{
					pEnt->close();
					continue;
				}

				//判断标高是否一致,方向是否垂直,且 公称直径一致??
				if ( fabs(pWPipe->EndPoint().z - ptTo.z) < 1.e-6 
					 /*&& fabs(m_pPipeParam->dSize[0] - data.dSize[0]) < 1.e-6*/)
				{
					vtDir2 = pWPipe->EndPoint() - pWPipe->StartPoint();
					if (vtDir2.isPerpendicularTo(vtDir))
					{
						line2.set(pWPipe->StartPoint(),pWPipe->EndPoint());
						Point_ID ptid;
						ptid.id = idT;
						ptid.pCurve = &line;

						if ( line1.intersectWith(line2,ptid.ptInt))
						{
							vtPtids.push_back(ptid);
						}
					}
				}
			}
			pEnt->close();
		}
	}

	//排序
	if (!vtPtids.empty())
	{
		std::sort(vtPtids.begin(),vtPtids.end(),ComparePointID);

		typedef std::vector<Point_ID>::iterator PIDIT;
		for (PIDIT it = vtPtids.begin();it != vtPtids.end();it++)
		{
			AddCross( (*it).id,(*it).ptInt,id);
		}
	}
	acedSSFree(ss);
	return FALSE;

	return FALSE;
}

BOOL AecDbECableLine::SplitWPipe(AcGePoint3d& ptMid,double dL,AecDbECableTray* pWPipe,BOOL bEraseWhiletooShort/* = TRUE*/)
{
	AcGePoint3d ptSta = pWPipe->StartPoint();
	AcGePoint3d ptEnd = pWPipe->EndPoint();
	AcGeVector3d vtDir = ptEnd - ptSta;
	vtDir.normalize();

	AecDbObjXDataMap* pXDataMapt = pWPipe->GetSpecialtyData();

	AcGePoint3d ptTemp = ptMid - dL * vtDir;
	AcGeVector3d vtDir1 = ptTemp - ptSta;
	if (vtDir.isCodirectionalTo(vtDir1)) //同向,说明放得下L的 Tee
	{
		AecHvac::DuctParam data;
		pWPipe->GetDuctParam(data);

		//新建管子
		//放得下L的 Tee 的情况,新建vtDir 方向的end端
		AecDbECableTray* pWPipe1 = new AecDbECableTray;
		AecDbObjXDataMap* pXDataMap = pWPipe1->GetSpecialtyData();

		XHolder lH, rH;
		memset(&lH, 0, sizeof(XHolder));
		memset(&rH, 0, sizeof(XHolder));

		if (data.m_app == WPipe::eTrench)
		{
			pWPipe->GetXHolder(kLeft, lH);
			pWPipe->GetXHolder(kRight, rH);
		}

		//设置图层
		AecHvac::DuctParam *pParam = &data;
		AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
		int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
		AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, pParam->szSys, 4, _T("center2"), NULL);
		AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, pParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
		AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, pParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

		pXDataMap->SetAt(PIPE_CENTLAY,idCenLay);
		pXDataMap->SetAt(PIPE_OUTDLAY,idOutLay);
		pXDataMap->SetAt(PIPE_SINGLAY,idSingle);

		pWPipe1->SetDoubleLayer(idOutLay);
		pWPipe1->SetSingleLayer(idSingle);
		pWPipe1->SetCenterLayer(idCenLay);
		pWPipe1->setLayer(idOutLay);

		pWPipe1->SetDuctParam(&data);

		pWPipe1->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
		pWPipe1->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);

		ptTemp = ptMid - dL * vtDir;
		pWPipe1->SetStartPoint(ptSta);
		pWPipe1->SetEndPoint(ptTemp);
		pWPipe1->setLayer(pWPipe->layerId());

		//套管,洞口
		//移除内部关联的套管，如果位置在其中
		RemoveHolePipe(pWPipe1);

		if (pParam->m_app == WPipe::eTrench)
		{
			pWPipe1->SetXHolder(kLeft, lH);
			pWPipe1->SetXHolder(kRight, rH);
		}

		AcDbObjectId id = CoreTools::AddToModelSpace(pWPipe1);
		AddUserData(id,pXDataMap,0);

		//改变现有的管子的起点
		ptTemp = ptMid + dL * vtDir;
		pWPipe->SetStartPoint(ptTemp);

		//套管,洞口
		//移除内部关联的套管，如果位置在其中
		RemoveHolePipe(pWPipe);

		return TRUE;
	}
	else //放不下，直接更改 start 或 end 腾出L位置
	{
		double dDis1 = ptMid.distanceTo(ptSta);
		double dDis2 = ptMid.distanceTo(ptEnd);

		if (dDis1 < dDis2 )//靠近sta
		{
			ptTemp = ptMid + dL * vtDir;
			vtDir1 = ptEnd - ptTemp;
			if (vtDir1.isCodirectionalTo(vtDir))
			{
				pWPipe->SetStartPoint(ptTemp);
				return TRUE;
			}
		}
		else//靠近 end
		{
			ptTemp = ptMid - dL * vtDir;
			vtDir1 = ptTemp - ptSta;
			if (vtDir1.isCodirectionalTo(vtDir))
			{
				pWPipe->SetEndPoint(ptTemp);
				return TRUE;
			}
		}

		//套管,洞口
		//移除内部关联的套管，如果位置在其中
		RemoveHolePipe(pWPipe);
	}
	return FALSE;
}

void AecDbECableLine::RemoveHolePipe(AecDbECableTray* pWPipe)
{
	AcGePoint3d ptS = pWPipe->StartPoint();
	AcGePoint3d ptE = pWPipe->EndPoint();
	AcGePoint3d ptOn;
	AcGeVector3d vt1,vt2;

	AecDbObjXDataMap* pXDatMap = pWPipe->GetSpecialtyData();
	if (pXDatMap == NULL)
		return;

	//关联的洞口和套管联动
	AecDbObjXDataMap::It it = pXDatMap->Begin();
	AecDbObjXDataMap::It end = pXDatMap->End();

	CString sKey;
	AecXData cVal;
	memset(&cVal,0,sizeof(AecXData));

	CStringArray arKeysRemove;
	AcDbObjectId idSrc,idCloned;
	for (; it != end;)
	{
		if (!pXDatMap->GetNext(it, sKey, cVal)) break;
		if (sKey.Find(_T("$H")) != -1 && cVal.nVt == VT_BSTR)//可能的实体句柄
		{
			AcDbHandle handle(cVal.pszVal);

			AcDbObjectId idHole;
			acdbCurDwg()->getAcDbObjectId(idHole,false,handle);

			AcDbEntity* pEnt = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt,idHole,AcDb::kForRead))
			{
				AecDbX3dPartEntity* pX3dPartEnt = AecDbX3dPartEntity::cast(pEnt);
				if (pX3dPartEnt != NULL)
				{
					ptOn = pX3dPartEnt->GetOrgPoint(true);

					vt1 = ptOn - ptS;
					vt2 = ptOn - ptE;

					//TEST
					//AcDbCircle* pCir = new AcDbCircle;
					//pCir->setCenter(ptOn);
					//pCir->setRadius(100.0);
					//CoreTools::AddToModelSpace(pCir);

					if (vt1.dotProduct(vt2) > 1.e-10)//同向
					{
					}
					else
					{
						arKeysRemove.Add(sKey);
					}
				}

				pEnt->close();
			}
		}
	}

	for (int i = 0;i < arKeysRemove.GetSize();i++)
	{
		pXDatMap->RemoveAt(arKeysRemove.GetAt(i));
		//acutPrintf(_T("\nRemove key %s"),arKeysRemove.GetAt(i));
	}
}


BOOL AecDbECableLine::ModifyWPipe(AcGePoint3d& ptGe,AcDbObjectId id,int nPos)
{
	AcDbEntity* pEnt = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite))
	{
		AecDbECableTray* pWPipe = AecDbECableTray::cast(pEnt);
		if (pWPipe != NULL)
		{
			if (nPos == 0)
			{
				AcGePoint3d ptGeT;
				ptGeT = pWPipe->StartPoint();
				pWPipe->SetStartPoint(ptGe);
			}

			if (nPos == 1)
			{
				AcGePoint3d ptGeT;
				ptGeT = pWPipe->EndPoint();
				pWPipe->SetEndPoint(ptGe);
			}
		}
		pEnt->close();
	}
	return TRUE;
}

BOOL AecDbECableLine::AddTee(AecDbECableTray* pWPipe,double dL,const AcGePoint3d& ptMid,double dB, const AcGeVector3d& vtMin)
{
	AecDbEcFitting* pFit = new AecDbEcFitting;
	AecDbObjXDataMap* pXDataMap = pFit->GetSpecialtyData();

	AcGeVector3d vtMaj = pWPipe->EndPoint() - pWPipe->StartPoint();
	vtMaj.normalize();
	
	double dRatio = m_pPipeParam->m_dRatio;

	AecHvac::DuctParam paramMaj;
	pWPipe->GetDuctParam(paramMaj);//取主宽
	double dLx = GetElbowLx(&paramMaj);

	paramMaj.dSize[3] = m_pPipeParam->dSize[0];//

	//电缆沟设置分支
	paramMaj.dSize[12] = m_pPipeParam->dSize[4];
	paramMaj.dSize[13] = m_pPipeParam->dSize[5];
	paramMaj.dSize[14] = m_pPipeParam->dSize[6];
	paramMaj.dSize[15] = m_pPipeParam->dSize[7];
	paramMaj.dSize[16] = m_pPipeParam->dSize[8];
	paramMaj.dSize[17] = m_pPipeParam->dSize[9];
	paramMaj.dSize[18] = m_pPipeParam->dSize[10];

	pFit->SetDuctParam(paramMaj);

	if (paramMaj.m_app == WPipe::eTrench)
	{
		XHolder lH, rH;
		memset(&lH, 0, sizeof(XHolder));
		memset(&rH, 0, sizeof(XHolder));

		bool bLeft = pWPipe->GetXHolder(kLeft, lH);
		bool bRight = pWPipe->GetXHolder(kRight, rH);

		if (bLeft)
		pFit->SetXHolder(kLeft, m_lHolder);

		if (bRight)
		pFit->SetXHolder(kRight, m_rHolder);
	}

	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pFit->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);
	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME,(int)eTee);
	pFit->GetSpecialtyData()->SetAt(KEY_MID, ptMid);
	pFit->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度
	pFit->GetSpecialtyData()->SetAt(HELB_RadRatio, m_pPipeParam->m_dRatio);
	pFit->GetSpecialtyData()->SetAt(HTEE_Type,(int)AecHvac::eIncline2Branch);
	pFit->GetSpecialtyData()->SetAt(KEY_MAJBR, vtMaj);
	pFit->GetSpecialtyData()->SetAt(KEY_MINBR, vtMin);

	//设置图层
	AecHvac::DuctParam *pParam = m_pPipeParam;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, m_pPipeParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, m_pPipeParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, m_pPipeParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	pFit->setLayer(idOutLay);
	pFit->SetDoubleLayer(idOutLay);
	pFit->SetCenterLayer(idCenLay);
	pFit->SetCenterLayer(idCenLay);

	AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
	AddUserData(id,pXDataMap,2);
	return TRUE;
}

BOOL AecDbECableLine::AddTee3(const AcGePoint3d &ptMid, double dL, const AcGeVector3d& vtMaj,const AcGeVector3d &vtMin, AecUserInterface &uinf)
{
	AecDbEcFitting *pFit = new AecDbEcFitting;
	AecDbObjXDataMap *pXDataMap = pFit->GetSpecialtyData();

	double dLx = GetElbowLx(m_pPipeParam);
	pFit->SetDuctParam(*m_pPipeParam);

	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
	pFit->GetSpecialtyData()->SetAt(KEY_SINGLEW, 0);
	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME, (int)eTee);
	pFit->GetSpecialtyData()->SetAt(KEY_MID, ptMid);
	pFit->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度
	pFit->GetSpecialtyData()->SetAt(HELB_RadRatio, m_pPipeParam->m_dRatio);
	pFit->GetSpecialtyData()->SetAt(HTEE_Type, (int)AecHvac::eIncline2Branch);
	pFit->GetSpecialtyData()->SetAt(KEY_MAJBR, vtMaj);
	pFit->GetSpecialtyData()->SetAt(KEY_MINBR, vtMin);

	int nTeeStyle = 3;
	pFit->GetSpecialtyData()->SetAt(KEY_TEESTYLE, nTeeStyle);

	pFit->AddUserInterface(uinf);

	//设置图层
	AecHvac::DuctParam *pParam = m_pPipeParam;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, m_pPipeParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, m_pPipeParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, m_pPipeParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	pFit->setLayer(idOutLay);
	pFit->SetDoubleLayer(idOutLay);
	pFit->SetCenterLayer(idCenLay);
	pFit->SetCenterLayer(idCenLay);

	AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
	AddUserData(id, pXDataMap, 2);

	return TRUE;
}

BOOL AecDbECableLine::AddTee5(const AcGePoint3d &ptMid, double dL, const AcGeVector3d &vtMaj, const AcGeVector3d &vtMin, AecUserInterface &uinf)
{
	AecDbEcFitting *pFit = new AecDbEcFitting;
	AecDbObjXDataMap *pXDataMap = pFit->GetSpecialtyData();

	double dLx = GetElbowLx(m_pPipeParam);
	pFit->SetDuctParam(*m_pPipeParam);

	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
	pFit->GetSpecialtyData()->SetAt(KEY_SINGLEW, 0);
	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME, (int)eTee);
	pFit->GetSpecialtyData()->SetAt(KEY_MID, ptMid);
	pFit->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度
	pFit->GetSpecialtyData()->SetAt(HELB_RadRatio, m_pPipeParam->m_dRatio);
	pFit->GetSpecialtyData()->SetAt(HTEE_Type, (int)AecHvac::eIncline2Branch);
	pFit->GetSpecialtyData()->SetAt(KEY_MAJBR, vtMaj);
	pFit->GetSpecialtyData()->SetAt(KEY_MINBR, vtMin);

	int nTeeStyle = 5;
	pFit->GetSpecialtyData()->SetAt(KEY_TEESTYLE, nTeeStyle);

	pFit->AddUserInterface(uinf);


	//设置图层
	AecHvac::DuctParam *pParam = m_pPipeParam;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, m_pPipeParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, m_pPipeParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, m_pPipeParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	pFit->setLayer(idOutLay);
	pFit->SetDoubleLayer(idOutLay);
	pFit->SetCenterLayer(idCenLay);
	pFit->SetCenterLayer(idCenLay);

	AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
	AddUserData(id, pXDataMap, 2);

	return TRUE;
}

BOOL AecDbECableLine::AddCross(AcDbObjectId id1,AcGePoint3d& ptInt,AcDbObjectId idThis)
{
	AecHvac::DuctParam paramMaj,paramMin;
	AecHvac::DuctParam param1,param2;

	AecDbECableTray* pWPipe = NULL;
	double dL = 0.0,dB = 0.0;
	AcGeVector3d vtMaj,vtMin;

	double dRatio = m_pPipeParam->m_dRatio;

	double dLx = GetElbowLx(m_pPipeParam);
	dL = GetElbowL(m_pPipeParam);
	dB = dL;

	XHolder lH, rH;
	memset(&lH, 0, sizeof(XHolder));
	memset(&rH, 0, sizeof(XHolder));

	AcDbEntity* pEnt1 = NULL;
	AcDbEntity* pEnt2 = NULL;

	//确定maj
	if ( Acad::eOk == acdbOpenAcDbEntity(pEnt1,id1,AcDb::kForRead))
	{
		pWPipe = AecDbECableTray::cast(pEnt1);
		if (pWPipe != NULL)
		{
			pWPipe->GetDuctParam(param1);//取主宽

			if (param1.m_app == WPipe::eTrench)
			{
				pWPipe->GetXHolder(kLeft, lH);
				pWPipe->GetXHolder(kRight, rH);
			}
		}
		pEnt1->close();
	}
	if ( Acad::eOk == acdbOpenAcDbEntity(pEnt2,idThis,AcDb::kForRead))
	{
		pWPipe = AecDbECableTray::cast(pEnt2);
		if (pWPipe != NULL)
		{
			pWPipe->GetDuctParam(param2);//取主宽
		}
		pEnt2->close();
	}

	bool b2isMaj = false;
	if (param1.dSize[0] > param2.dSize[0])
	{
		memcpy(&paramMaj,&param1,sizeof(AecHvac::DuctParam));
		memcpy(&paramMin,&param2,sizeof(AecHvac::DuctParam));
	}
	else
	{
		memcpy(&paramMaj,&param2,sizeof(AecHvac::DuctParam));
		memcpy(&paramMin,&param1,sizeof(AecHvac::DuctParam));
		b2isMaj = true;
	}

	dLx = GetElbowLx(&paramMaj);
	dL = GetElbowL(&paramMaj);
	dB = dL;

	if ( fabs(param1.dSize[1] - param2.dSize[1]) > 1.e-1)
	{
		acutPrintf(_T("\n选择的两桥架高度不同,不能创建四通!"));
		return FALSE;
	}

	AcDbObjectId idLay;
	// id1 管分割为两部分
	if ( Acad::eOk == acdbOpenAcDbEntity(pEnt1,id1,AcDb::kForWrite))
	{
		pWPipe = AecDbECableTray::cast(pEnt1);
		if (pWPipe != NULL)
		{
			vtMaj = pWPipe->EndPoint() - pWPipe->StartPoint();
			vtMaj.normalize();

			AcGeLineSeg3d ln(pWPipe->StartPoint(),pWPipe->EndPoint());
			if (ln.isOn(ptInt)) //落在管子上,两管线相交
			{
				SplitWPipe(ptInt,dL,pWPipe,TRUE);
			}
			else //不落在管子上,两管线延长相交, 外部加四通命令调用
			{
				vtMaj.normalize();
				double dDis1 = ptInt.distanceTo(pWPipe->StartPoint());
				double dDis2 = ptInt.distanceTo(pWPipe->EndPoint());

				if (dDis1 < dDis2)//距离sta近
				{
					pWPipe->SetStartPoint(ptInt + vtMaj * dL);
				}
				else
				{
					pWPipe->SetEndPoint(ptInt - vtMaj * dL);
				}
			}
		}
		pEnt1->close();
	}

	//idThis 管分割为两部分
	if ( Acad::eOk == acdbOpenAcDbEntity(pEnt2,idThis,AcDb::kForWrite))
	{
		idLay = pEnt2->layerId();
		pWPipe = AecDbECableTray::cast(pEnt2);
		if (pWPipe != NULL)
		{
			vtMin = pWPipe->EndPoint() - pWPipe->StartPoint();
			vtMin.normalize();

			AcGeLineSeg3d ln(pWPipe->StartPoint(),pWPipe->EndPoint());
			if (ln.isOn(ptInt)) //落在管子上,两管线相交
			{
				if ( !SplitWPipe(ptInt,dB,pWPipe,FALSE) )
				{
					//太短,放不下四通
					pEnt2->close();
					return FALSE;
				}
			}
			else //不落在管子上,两管线延长相交, 外部加四通命令调用
			{
				vtMin.normalize();
				double dDis1 = ptInt.distanceTo(pWPipe->StartPoint());
				double dDis2 = ptInt.distanceTo(pWPipe->EndPoint());

				if (dDis1 < dDis2)//距离sta近
				{
					pWPipe->SetStartPoint(ptInt + vtMin * dL);
				}
				else
				{
					pWPipe->SetEndPoint(ptInt - vtMin * dL);
				}
			}
		}
		pEnt2->close();
	}

	//加入四通
	AcGeVector3d vtNro = vtMin.crossProduct(vtMaj);
	AecDbEcFitting* pFit = new AecDbEcFitting;
	AecDbObjXDataMap* pXDataMap = pFit->GetSpecialtyData();

	//设置图层
	int nColor = KTSetting::GetLayerColor(LAY_CABTRY_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx(LAY_CABTRY_CEN,m_pPipeParam->szSys,4,_T("center2"),NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((m_pPipeParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT,m_pPipeParam->szSys,nColor, (m_pPipeParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"),NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((m_pPipeParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG,m_pPipeParam->szSys,7, (m_pPipeParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"),NULL);

	pFit->setLayer(idOutLay);
	pFit->SetDoubleLayer(idOutLay);
	pFit->SetCenterLayer(idCenLay);
	pFit->SetCenterLayer(idCenLay);

	paramMaj.dSize[3] = paramMin.dSize[0];//

	//电缆沟设置分支
	paramMaj.dSize[12] = m_pPipeParam->dSize[4];
	paramMaj.dSize[13] = m_pPipeParam->dSize[5];
	paramMaj.dSize[14] = m_pPipeParam->dSize[6];
	paramMaj.dSize[15] = m_pPipeParam->dSize[7];
	paramMaj.dSize[16] = m_pPipeParam->dSize[8];
	paramMaj.dSize[17] = m_pPipeParam->dSize[9];
	paramMaj.dSize[18] = m_pPipeParam->dSize[10];

	pFit->SetDuctParam(paramMaj);

	if (paramMaj.m_app == WPipe::eTrench)
	{
		pFit->SetXHolder(kLeft,lH);
		pFit->SetXHolder(kRight, rH);
	}

	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pFit->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);
	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME,(int)eCross);
	pFit->GetSpecialtyData()->SetAt(KEY_MID, ptInt);
	pFit->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度
	pFit->GetSpecialtyData()->SetAt(HELB_RadRatio, m_pPipeParam->m_dRatio);
	pFit->GetSpecialtyData()->SetAt(HTEE_Type,(int)AecHvac::eInterCross);
	pFit->GetSpecialtyData()->SetAt(KEY_MAJBR, b2isMaj ? vtMin : vtMaj);
	pFit->GetSpecialtyData()->SetAt(KEY_MINBR, b2isMaj ? vtMaj : vtMin);

	AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
	AddUserData(id,pXDataMap,2);
	return TRUE;
}

BOOL AecDbECableLine::AddElbow(AcDbObjectId id1,AcGePoint3d& ptGe,AcDbObjectId idThis)
{
	AecDbECableTray* pWPipe1 = NULL;
	AecDbECableTray* pWPipe2 = NULL;
	AcDbEntity* pEnt1 = NULL;
	AcDbEntity* pEnt2 = NULL;
	BOOL bSuccess = FALSE;

	if (Acad::eOk == acdbOpenAcDbEntity(pEnt1,id1,AcDb::kForWrite))
	{
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt2,idThis,AcDb::kForWrite))
		{
			pWPipe1 = AecDbECableTray::cast(pEnt1);
			pWPipe2 = AecDbECableTray::cast(pEnt2);

			if (pWPipe1 != NULL && pWPipe2 != NULL)
			{
				AcGeLine3d ln1(pWPipe1->StartPoint(),pWPipe1->EndPoint());
				AcGeLine3d ln2(pWPipe2->StartPoint(),pWPipe2->EndPoint());

				AcGePoint3d ptMid = ptGe;
				ln1.intersectWith(ln2,ptMid);

				ptGe = ptMid;//??
				AecHvac::DuctParam param1,param2;

				pWPipe1->GetDuctParam(param1);
				pWPipe2->GetDuctParam(param2);

				int npos1 = 1,npos2 = 1;
				AcGeVector3d vtMaj,vtMin;
				double dDis1 = ptMid.distanceTo(pWPipe1->EndPoint());
				double dDis2 = ptMid.distanceTo(pWPipe1->StartPoint());
				vtMaj = pWPipe1->EndPoint() - pWPipe1->StartPoint();//默认靠近 end
				if (dDis1 > dDis2)
				{
					vtMaj = pWPipe1->StartPoint() - pWPipe1->EndPoint();//靠近 sta
					npos1 = 0;
				}
				vtMaj.normalize();
				vtMaj.negate();

				dDis1 = ptMid.distanceTo(pWPipe2->EndPoint());
				dDis2 = ptMid.distanceTo(pWPipe2->StartPoint());

				vtMin = pWPipe2->EndPoint() - pWPipe2->StartPoint();//默认靠近 end
				if (dDis1 > dDis2)
				{
					vtMin = pWPipe2->StartPoint() - pWPipe2->EndPoint();//靠近 sta
					npos2 = 0;
				}
				vtMin.normalize();
				vtMin.negate();

				//if ( fabs(param1.dSize[0] - param2.dSize[0]) < 1.e-6)
				{
					//创建弯头,是插入到当前管子的接口记录的前面
					AcDbObjectId id = CreateElbow(vtMaj,ptMid,vtMin,&param1,TRUE);

					//获取万头接口,改变边的管子
					AcDbEntity* pEnt3 = NULL;
					if (Acad::eOk == acdbOpenAcDbEntity(pEnt3,id,AcDb::kForRead))
					{
						AecDbEcFitting* pFit = AecDbEcFitting::cast(pEnt3);
						if (pFit != NULL)
						{
							AecInterface inf1,inf2;
							pFit->GetInterface(0,inf1);
							pFit->GetInterface(1,inf2);

							AcGeVector3d vtPipe = pWPipe1->EndPoint() - pWPipe1->StartPoint();
							if (vtPipe.isParallelTo(inf1.vtDir))
							{
								if (npos1 == 0)//改sta
									pWPipe1->SetStartPoint(inf1.ptPos);
								else
									pWPipe1->SetEndPoint(inf1.ptPos);

								if (npos2 == 0)
									pWPipe2->SetStartPoint(inf2.ptPos);
								else
									pWPipe2->SetEndPoint(inf2.ptPos);
							}
							else
							{
								if (npos1 == 0)//改sta
									pWPipe1->SetStartPoint(inf2.ptPos);
								else
									pWPipe1->SetEndPoint(inf2.ptPos);

								if (npos2 == 0)
									pWPipe2->SetStartPoint(inf1.ptPos);
								else
									pWPipe2->SetEndPoint(inf1.ptPos);
							}
						}
						pEnt3->close();
					}
				}
				bSuccess = TRUE;
			}
			pEnt2->close();
		}
		pEnt1->close();
	}
	return bSuccess;
}

BOOL AecDbECableLine::ChangeElbowToTree(AecDbEcFitting* pDbFit,AcGeVector3d vtMaj,AcGePoint3d ptGeM,AcGeVector3d vtMin,double dDn,AECStatusRecord* pCurRec)
{
	//查询 Tee 数据
	AecHvac::DuctParam param;
	memset(&param,0,sizeof(AecHvac::DuctParam));
	pDbFit->GetDuctParam(param);

	double dL = 0.0,dS = 0.0;
	dL = GetElbowL(&param);
	dS = dL;
	double dLx = GetElbowLx(&param);

	AecInterface intf1,intf2;
	pDbFit->GetInterface(0,intf1);
	pDbFit->GetInterface(1,intf2);

	vtMaj.normalize();
	vtMin.normalize();

	//创建三通
	AecDbEcFitting* pFitting = new AecDbEcFitting;
	AecDbObjXDataMap* pXDataMap = pFitting->GetSpecialtyData();

	pFitting->SetDuctParam(param);

	if (param.m_app == WPipe::eTrench)
	{
		XHolder lHolder, rHolder;
		memset(&lHolder, 0, sizeof(XHolder));
		memset(&rHolder, 0, sizeof(XHolder));

		bool bLeft = pDbFit->GetXHolder(kLeft, lHolder);
		bool bRight = pDbFit->GetXHolder(kRight, rHolder);

		if (bLeft)
		pFitting->SetXHolder(kLeft, m_lHolder);

		if (bRight)
		pFitting->SetXHolder(kRight, m_rHolder);
	}

	pFitting->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pFitting->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);
	pFitting->GetSpecialtyData()->SetAt(KEY_RUNTIME,(int)eTee);
	pFitting->GetSpecialtyData()->SetAt(KEY_MID, ptGeM);
	pFitting->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度
	pFitting->GetSpecialtyData()->SetAt(HELB_RadRatio, m_pPipeParam->m_dRatio);
	pFitting->GetSpecialtyData()->SetAt(HTEE_Type,(int)AecHvac::eIncline2Branch);
	pFitting->GetSpecialtyData()->SetAt(KEY_MAJBR, vtMaj);
	pFitting->GetSpecialtyData()->SetAt(KEY_MINBR, vtMin);

	AcGeVector3d vtNro = vtMin.crossProduct(vtMaj);
	pXDataMap->SetAt(KEY_NORMAL,vtNro);
	
	//设置图层
	AecHvac::DuctParam *pParam = &param;
	AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
	AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, m_pPipeParam->szSys, 4, _T("center2"), NULL);
	AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, m_pPipeParam->szSys, nColor, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);
	AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, m_pPipeParam->szSys, 7, (pParam->m_app == WPipe::eBridge) ? _T("Continuous") : _T("Dashed"), NULL);

	pFitting->setLayer(idOutLay);
	pFitting->SetDoubleLayer(idOutLay);
	pFitting->SetCenterLayer(idCenLay);
	pFitting->SetCenterLayer(idCenLay);

	//可能的几种修改，更改弯头两头的管子的位置
	AcGePoint3d ptGe;
	if (intf1.vtDir.isParallelTo(vtMin))
	{
		ptGe = ptGeM + dS * vtMin;
		ModifyPipeOfElbow(GetConnectObject(intf1, m_arHistoryIntfs),intf1.ptPos,ptGe);
	}

	if (intf2.vtDir.isParallelTo(vtMin))
	{
		ptGe = ptGeM + dS * vtMin;
		ModifyPipeOfElbow(GetConnectObject(intf2, m_arHistoryIntfs),intf2.ptPos,ptGe);
	}

	if (intf1.vtDir.isParallelTo(vtMaj))
	{
		ptGe = ptGeM - dL * vtMaj;
		ModifyPipeOfElbow(GetConnectObject(intf1, m_arHistoryIntfs),intf1.ptPos,ptGe);
	}

	if (intf2.vtDir.isParallelTo(vtMaj))
	{
		ptGe = ptGeM - dL * vtMaj;//反向
		ModifyPipeOfElbow(GetConnectObject(intf2, m_arHistoryIntfs),intf2.ptPos,ptGe);
	}

	//替换pdbfit
	pDbFit->erase();

	AcDbObjectId id = CoreTools::AddToModelSpace(pFitting);
	AddUserData(id,pXDataMap,2);

	//
	AECStatusRecord* pRecMid = new AECStatusRecord;
	pRecMid->CopyFrom(pCurRec);
	ptGe = ptGeM + vtMaj * dL;
	pRecMid->SetAcquirePoint(ptGe);
	m_pPipeJig->PushBackStatusRec(pRecMid);

	return TRUE;
}

BOOL AecDbECableLine::ChangeTeeToCross(AecDbEcFitting* pDbFit,AcGeVector3d& vtMaj,AcGeVector3d& vtMin,AECStatusRecord* pCurRec)
{
	AecHvac::DuctParam param;
	memset(&param,0,sizeof(AecHvac::DuctParam));
	pDbFit->GetDuctParam(param);

	double dL = 0.0,dB = 0.0;
	dL = GetElbowL(&param);
	dB = dL;
	double dLx = GetElbowLx(&param);

	AecDbObjXDataMap* pXDataMap = pDbFit->GetSpecialtyData();

	pXDataMap->SetAt(KEY_RUNTIME, eCross);
	pXDataMap->SetAt(KEY_MAJBR,vtMaj);
	pXDataMap->SetAt(KEY_MINBR,vtMin);//

	AcGeVector3d vtNro = vtMaj.crossProduct(vtMin);//
	pXDataMap->SetAt(KEY_NORMAL,vtNro);

	pXDataMap->SetAt(KEY_L,dL);
	pXDataMap->SetAt(KEY_T,dB);

	AcGePoint3d ptMid;
	pXDataMap->GetAt(KEY_MID,ptMid);

	pDbFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);
	pDbFit->GetSpecialtyData()->SetAt(KEY_SINGLEW,0);
	pDbFit->GetSpecialtyData()->SetAt(KEY_RUNTIME,(int)eCross);
	pDbFit->GetSpecialtyData()->SetAt(KEY_MID, ptMid);
	pDbFit->GetSpecialtyData()->SetAt(HELB_LX, dLx);//直边长度
	pDbFit->GetSpecialtyData()->SetAt(HELB_RadRatio, m_pPipeParam->m_dRatio);
	pDbFit->GetSpecialtyData()->SetAt(HTEE_Type,(int)AecHvac::eInterCross);
	pDbFit->GetSpecialtyData()->SetAt(KEY_MAJBR, vtMaj);
	pDbFit->GetSpecialtyData()->SetAt(KEY_MINBR, vtMin);

	vtMin.normalize();
	AcGePoint3d ptGe = ptMid - vtMin * dB;

	AECStatusRecord* pRecMid = new AECStatusRecord;
	pRecMid->CopyFrom(pCurRec);
	pRecMid->SetAcquirePoint(ptGe);
	m_pPipeJig->PushBackStatusRec(pRecMid);

	return TRUE;
}

void AecDbECableLine::ModifyPipeOfElbow(AcDbObjectId id,AcGePoint3d ptOld,AcGePoint3d ptNew)
{
	AcDbEntity* pEnt = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite))
	{
		AecDbECableTray* pPipe = AecDbECableTray::cast(pEnt);
		if (pPipe != NULL)
		{
			AcGePoint3d ptGeT;
			AcGeVector3d vtPipe = pPipe->EndPoint() - pPipe->StartPoint();

			if ( pPipe->EndPoint().distanceTo(ptOld) < 1.e-6)
			{
				ptGeT = pPipe->EndPoint();
				pPipe->SetEndPoint(ptNew);
			}

			if (pPipe->StartPoint().distanceTo(ptOld) < 1.e-6)
			{
				ptGeT = pPipe->StartPoint();
				pPipe->SetStartPoint(ptNew);
			}
		}
		pEnt->close();
	}
}

double AecDbECableLine::PixelToWcs(int nPixel)
{
	ads_point ptScreenSize;
	double nViewSize;
	struct resbuf rb1,rb2;
	acedGetVar(_T("ScreenSize"), &rb1);
	acedGetVar(_T("ViewSize"), &rb2);
	nViewSize = rb2.resval.rreal;
	ads_point_set(rb1.resval.rpoint,ptScreenSize);

	if (ptScreenSize[1] < 1.0E-6 || nViewSize < 1.0E-6)
		return 0.0;

	double hight = (nViewSize / ptScreenSize[Y]) * nPixel;
	return hight;
}

void AecDbECableLine::AddUserData(AcDbObjectId id,AecDbObjXDataMap* pXDataMap,int nType)
{
	// 增加参数 [10/24/2016 Rex]
	if(g_pMapData != NULL && !id.isNull())
	{
		AecDbObjXDataMap* pXTempDataMap  = new AecDbObjXDataMap();
		CMapStringToString mapData;

		if(pXTempDataMap->Read(id,_T("BIMEQUIP"),TRUE))
		{
			//用户数据USER0~999
			CString sKey,sVal;
			for (int i = 0;i < MAX_BIM_DATA_LEN;i++)
			{
				sKey.Format(_T("user%d"),i)	;
				if (pXDataMap->GetAt(sKey,sVal))
				{
					mapData.SetAt(sKey,sVal);
				}
				else
				{
					break;
				}
			}
		}

		mapData.RemoveAll();
		CString sKey;
		CString sVal;
		for (POSITION ps = g_pMapData->GetStartPosition();ps != NULL;)
		{
			g_pMapData->GetNextAssoc(ps,sKey,sVal);
			mapData.SetAt(sKey,sVal);
		}
		for (int i = 0;i < MAX_BIM_DATA_LEN;i++)
		{
			sKey.Format(_T("user%d"),i)	;
			pXTempDataMap->RemoveAt(sKey);
		}
		for (POSITION ps = mapData.GetStartPosition();ps != NULL;)
		{
			mapData.GetNextAssoc(ps,sKey,sVal);

			if(sVal.Find(_T("物料描述")) != -1)
			{
				//nType == 0 Pipe,1 Elbow,2 Tee,3 Cross,4 Flange
				CString szTempKey = _T("");
				switch (nType)
				{
				case 1:
				case 2:
				case 3:
				case 4:
				case 5:
					{
						if(nType == 1)
							szTempKey = _T("弯头");
						else if(nType == 2)
							szTempKey = _T("三通");
						else if(nType == 3)
							szTempKey = _T("四通");
						else if(nType == 4)
							szTempKey = _T("法兰");
						else if(nType == 5)
							szTempKey = _T("变径");
						else
							szTempKey = _T("");
						CString szTemp;
						szTemp = sVal;
						int nIndex = szTemp.Find(_T("("));
						if(nIndex >= 0)
						{
							szTemp = szTemp.Mid(nIndex);
							szTempKey = _T("物料描述:") + szTempKey;
							szTemp = szTempKey + szTemp;
							sVal = szTemp;
						}
					}
					break;
				default:
					break;
				}
			}
			pXTempDataMap->SetAt(sKey,sVal);
		}
		//pXTempDataMap->SetAt(_T("user0"),_T("test:test"));
		if(pXTempDataMap->Write(id,_T("BIMEQUIP"),TRUE))
		{
			DELETE_PTR(pXTempDataMap);
			pXTempDataMap = NULL;
		}
	}
}