#include "stdafx.h"
#include "TJSTDlg.h"
#include "AecDbEarthWorm.h"
#include "KTCADUtilityEx.h"
#include "AcDbX3dSolid.h"
#include "AecDbX3dGroup.h"
#include "UITools.h"
#include "axlock.h"
#include "AecDbEarthWormFitting.h"
#include "KTTempTol.h"
#include "AecDbEwFitting.h"

#ifndef Plumbing_DB
#define Plumbing_DB _T("\\Plumbing.db")
#endif

static const Adesk::UInt16 kColorByBlock   = 0;
static const Adesk::UInt16 kRed            = 1;
static const Adesk::UInt16 kYellow         = 2;
static const Adesk::UInt16 kGreen          = 3;
static const Adesk::UInt16 kCyan           = 4;
static const Adesk::UInt16 kBlue           = 5;
static const Adesk::UInt16 kMagenta        = 6;
static const Adesk::UInt16 kWhite          = 7;
static const Adesk::UInt16 kColorByLayer   = 256;
extern CString IDCreate();
extern AecInterface* SelectLockInf(AcDbObjectId idEW,AecDbX3dGroup*& pGroupAt);
extern AecInterface* SelectLockInf(AcDbObjectId idEW,AecDbObjXDataMap*& pGroupMap);
extern AecInterface* SelectLockInfH(AcDbObjectId idHouse,AecDbObjXDataMap*& pGroupMap);


IMPLEMENT_DYNAMIC(CTJSTDlg, CDialog)

CTJSTDlg::CTJSTDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CTJSTDlg::IDD, pParent)
	, m_sOutDir(_T("0,0,1"))
	, m_dDn(0.0)
	, m_nPos(0)
	, m_sInfDir1(_T(""))
	, m_sInfDir2(_T(""))
	, m_bOnMidPipe(FALSE)
{
	m_vtEnter = AcGeVector3d::kXAxis;
	m_vtOutDir = AcGeVector3d::kZAxis;
	m_ptStart.set(0,0,0);

	m_sCurrSys = _T("");
	m_sMertial = _T("");
	m_nPipeColor = kRed;
	m_dLen1 = 0;
	m_dLen2 = 0;
	m_dDn2 = 0.0;
	m_dt = 14; 
	m_idxRoom = -1;
}

CTJSTDlg::~CTJSTDlg()
{
}

void CTJSTDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Text(pDX, IDC_EDIT6, m_sOutDir);
	DDX_Text(pDX, IDC_EDIT3, m_dDn);
	DDX_Text(pDX, IDC_EDIT7, m_dDn2);
	DDX_Text(pDX, IDC_EDIT4, m_sMertial);
	DDX_Text(pDX, IDC_EDIT5, m_sCurrSys);
	DDX_Radio(pDX, IDC_RADIO1, m_nPos);
	DDX_Text(pDX, IDC_EDIT10, m_sInfDir1);
	DDX_Text(pDX, IDC_EDIT34, m_sInfDir2);
	DDX_Check(pDX, IDC_CHECK1, m_bOnMidPipe);
}

BEGIN_MESSAGE_MAP(CTJSTDlg, CDialog)
	ON_BN_CLICKED(IDOK, &CTJSTDlg::OnBnClickedOk)
	ON_BN_CLICKED(IDC_BUTTON1, &CTJSTDlg::OnBnClickedButton1)
	ON_BN_CLICKED(IDC_BUTTON2, &CTJSTDlg::OnBnClickedButton2)
	ON_BN_CLICKED(IDC_RADIO1, &CTJSTDlg::OnBnClickedRadio1)
	ON_BN_CLICKED(IDC_RADIO2, &CTJSTDlg::OnBnClickedRadio2)
	ON_BN_CLICKED(IDC_RADIO3, &CTJSTDlg::OnBnClickedRadio3)
	ON_BN_CLICKED(IDC_RADIO4, &CTJSTDlg::OnBnClickedRadio4)
	ON_BN_CLICKED(IDC_RADIO12, &CTJSTDlg::OnBnClickedRadio12)
	ON_BN_CLICKED(IDC_RADIO13, &CTJSTDlg::OnBnClickedRadio13)
	ON_BN_CLICKED(IDC_BUTTON4, &CTJSTDlg::OnBnClickedButton4)
	ON_BN_CLICKED(IDC_BUTTON5, &CTJSTDlg::OnBnClickedButton5)
END_MESSAGE_MAP()

BOOL CTJSTDlg::OnInitDialog()
{
	CDialog::OnInitDialog();

	CString path = FilePath::GetSysDir() + Plumbing_DB;
	if (!m_dbSQLite.InitADOServer(path))
	{
		AfxMessageBox(CString(_T("数据库初始化失败，请检查 sys")) + Plumbing_DB + _T("文件是否存在."));
		return FALSE;
	}

	return TRUE;
}

void CTJSTDlg::SetEWFittingId(AcDbObjectId& id)
{
	m_idEWFit = id;
}

void CTJSTDlg::SetXXXHouseID(AcDbObjectId& id)
{
	m_idHouse = id;
}

void CTJSTDlg::OnBnClickedOk()
{
	if (m_dDn < 1.e-2)
	{
		AfxMessageBox(_T("没有选择主管道接口位置!"));
		return;
	}

	//查询三通尺寸
	int nDn1 = (int)(m_dDn + 0.1);
	int nDn2 = (int)(m_dDn2 + 0.1);
	
	if (nDn1 < nDn2)//交换
	{
		AfxMessageBox(_T("三通主进口公称直径必须大于等于分支口公称直径!"));
		return;
	}

	CString sSQL;
	sSQL.Format(_T("select [长度L],[长度S] from AecTeeData where [公称直径L]=%d AND [公称直径S]=%d"),nDn1,nDn2);

	CStringArray arVals;
	m_dbSQLite.GetSelData(sSQL,arVals);

	if (arVals.IsEmpty())
	{
		//再从AecTeeData中查找
		sSQL.Format(_T("select [结构长度] from AecTeeTData where [公称直径]=%d"),nDn1);
		m_dbSQLite.GetSelData(sSQL,arVals);

		if (arVals.IsEmpty())
		{
			sSQL.Format(_T("查不到公称直径为 %d 的三通结构尺寸!"),nDn1);
			AfxMessageBox(sSQL);
			return;
		}
		else
		{
			m_dLen1 = _ttof(arVals.GetAt(0));
		}

		arVals.RemoveAll();
		sSQL.Format(_T("select [结构长度] from AecTeeTData where [公称直径]=%d"),nDn2);
		m_dbSQLite.GetSelData(sSQL,arVals);

		if (arVals.IsEmpty())
		{
			sSQL.Format(_T("查不到公称直径为 %d 的三通结构尺寸!"),nDn2);
			AfxMessageBox(sSQL);
			return;
		}
		else
		{
			m_dLen2 = _ttof(arVals.GetAt(0));
		}
	}
	else
	{
		if (arVals.GetSize() >= 2)
		{
			m_dLen1 = _ttof(arVals.GetAt(0));
			m_dLen2 = _ttof(arVals.GetAt(1));
		}
	}

	m_vtEnter.normalize();
	m_vtOutDir.normalize();

	KTTempTol tol(1.e-3);
	if (!m_vtEnter.isParallelTo(m_vtEnter))
	{
		AfxMessageBox(_T("三通主方向和支管方向不垂直，不能创建管件!"));
		return;
	}

	OnOK();
}

void CTJSTDlg::OnBnClickedButton1()
{
	UpdateData(TRUE);

	EnableWindow(FALSE);
	CWnd* pFrame = acedGetAcadFrame();
	pFrame->EnableWindow(TRUE);
	ShowWindow(SW_HIDE);
	pFrame->SetFocus();

	ads_point pt;
	int nRes = acedGetPoint(NULL,_T("\n选择接口点:"),pt);
	if (nRes == RTNORM)
	{
		AcGePoint3d ptInf = asPnt3d(pt);

		//选择管道，弯头等
		AcAxDocLock lock;
		AecDbEarthWormFitting* pFit = NULL;
		if ( Acad::eOk == acdbOpenAcDbEntity((AcDbEntity*&)pFit,m_idEWFit,AcDb::kForRead))
		{
			AecDbX3dGroup* pGroupNext = NULL;
			int nPos = 0;
			double dDn = 0.0,dSpace = 0.0;

			while( pFit->GetX3dGroup(nPos,pGroupNext) )
			{
				AcArray<AecInterface> arInfs;
				if ( pGroupNext->GetInterface(arInfs) )
				{
					if ( !pGroupNext->GetSpecialtyData()->GetAt(_T("m_dDn"),dDn) )
					{
						pGroupNext->GetSpecialtyData()->GetAt(_T("m_dDn2"),dDn);
					}

					for (int i = 0;i < arInfs.length();i++)
					{
						dSpace = ptInf.distanceTo(arInfs.at(i).ptPos);

						if ( fabs( dSpace - 0.5 * AS_MUNIT(dDn) ) < 1.e-1) //10mm
						{
							m_ptStart = arInfs.at(i).ptPos;
							m_vtEnter = arInfs.at(i).vtDir;

							//复制pGroup的材料信息和管径
							pGroupNext->GetSpecialtyData()->GetAt(_T("m_sCurrSys"),m_sCurrSys);
							pGroupNext->GetSpecialtyData()->GetAt(_T("m_sMertial"),m_sMertial);
							pGroupNext->GetSpecialtyData()->GetAt(_T("m_idxRoom"),m_idxRoom);
						
							m_dDn = dDn;
							m_dDn2 = m_dDn;
							pGroupNext->GetSpecialtyData()->GetAt(_T("m_dt"),m_dt);
							pGroupNext->GetSpecialtyData()->GetAt(_T("COLOR"),m_nPipeColor);//系统默认KEY COLOR

							break;
						}
					}
				}
			}
			pFit->close();
		}
	}

	pFrame->EnableWindow(FALSE);
	ShowWindow(SW_SHOW);
	EnableWindow(TRUE);
	UpdateData(FALSE);
}

void CTJSTDlg::OnBnClickedButton4()
{
	UpdateData();
	AecDbObjXDataMap* pGroupNext = NULL;
	AecInterface* pInf = SelectLockInf(m_idEWFit,pGroupNext);
	double dDn = 0.0,dSpace = 0.0;

	if (pInf == NULL)
	{
		pInf = SelectLockInfH(m_idHouse,pGroupNext);
	}

	if (pInf != NULL)
	{
		if ( !pGroupNext->GetAt(_T("m_dDn"),dDn) )
		{
			pGroupNext->GetAt(_T("m_dDn2"),dDn);
		}

		pGroupNext->GetAt(_T("m_dOD"),m_dOD);
		if (dDn < 1.e-3)
		{
			pGroupNext->GetAt(PIPE_DN,dDn);
			dDn *= 1000.0;
		}

		m_ptStart = pInf->ptPos;
		m_vtEnter = pInf->vtDir;

		if (m_bOnMidPipe)
		{
			AcGePoint3d ptMid;
			if ( pGroupNext->GetAt(KEY_MID,ptMid) )
			{
				m_ptStart = ptMid;
				pInf->ptPos = ptMid;
			}
		}

		//复制pGroup的材料信息和管径
		pGroupNext->GetAt(_T("m_idxRoom"),m_idxRoom);

		pGroupNext->GetAt(_T("m_sCurrSys"),m_sCurrSys);

		if (!pGroupNext->GetAt(_T("m_sMertial"),m_sMertial))
		{
			pGroupNext->GetAt(PIPE_MATERIAL,m_sMertial);
			pGroupNext->GetAt(PIPE_SYS,m_sCurrSys);
		}

		pGroupNext->GetAt(PIPE_OD,m_dOD);
		m_dOD *= 1000.0;

		m_dDn = dDn;
		m_dDn2 = m_dDn;

		if ( !pGroupNext->GetAt(_T("m_dt"),m_dt) )
		{
			pGroupNext->GetAt(PIPE_THICK,m_dt);
			m_dt *= 1000.0;//转为毫米
		}

		pGroupNext->GetAt(_T("COLOR"),m_nPipeColor);//系统默认KEY COLOR		

		pInf->vtDir.normalize();
		m_sInfDir1.Format(_T("%g,%g,%g"),pInf->vtDir.x,pInf->vtDir.y,pInf->vtDir.z);

		UpdateData(FALSE);
	}
}

void CTJSTDlg::OnBnClickedButton2()
{
	UpdateData(TRUE);

	EnableWindow(FALSE);
	CWnd* pFrame = acedGetAcadFrame();
	pFrame->EnableWindow(TRUE);
	ShowWindow(SW_HIDE);
	pFrame->SetFocus();

	ads_point pt;
	int nRes = acedGetPoint(NULL,_T("\n选择接口点:"),pt);
	if (nRes == RTNORM)
	{
		AcGePoint3d ptInf = asPnt3d(pt);

		//选择管道，弯头等
		AcAxDocLock lock;
		AecDbEarthWormFitting* pFit = NULL;
		if ( Acad::eOk == acdbOpenAcDbEntity((AcDbEntity*&)pFit,m_idEWFit,AcDb::kForRead))
		{
			AecDbX3dGroup* pGroupNext = NULL;
			int nPos = 0;
			double dDn = 0.0,dSpace = 0.0;

			while( pFit->GetX3dGroup(nPos,pGroupNext) )
			{
				AcArray<AecInterface> arInfs;
				if ( pGroupNext->GetInterface(arInfs) )
				{
					if ( !pGroupNext->GetSpecialtyData()->GetAt(_T("m_dDn"),dDn) )
					{
						pGroupNext->GetSpecialtyData()->GetAt(_T("m_dDn2"),dDn);
					}

					for (int i = 0;i < arInfs.length();i++)
					{
						dSpace = ptInf.distanceTo(arInfs.at(i).ptPos);

						if ( fabs( dSpace - 0.5 * AS_MUNIT(dDn) ) < 1.e-1) //10mm
						{
							pGroupNext->GetSpecialtyData()->GetAt(_T("m_idxRoom"),m_idxRoom);
							m_vtOutDir = arInfs.at(i).vtDir;
							m_dDn2 = dDn;
							break;
						}
					}
				}
			}
			pFit->close();
		}
	}

	pFrame->EnableWindow(FALSE);
	ShowWindow(SW_SHOW);
	EnableWindow(TRUE);
	UpdateData(FALSE);
}

void CTJSTDlg::OnBnClickedButton5()
{
	UpdateData();
	AecDbObjXDataMap* pGroupNext = NULL;
	AecInterface* pInf = SelectLockInf(m_idEWFit,pGroupNext);
	double dDn = 0.0,dSpace = 0.0;

	if (pInf == NULL)
	{
		pInf = SelectLockInfH(m_idHouse,pGroupNext);
	}

	if (pInf != NULL)
	{
		if ( !pGroupNext->GetAt(_T("m_dDn"),dDn) )
		{
			pGroupNext->GetAt(_T("m_dDn2"),dDn);
		}

		pGroupNext->GetAt(_T("m_idxRoom"),m_idxRoom);
		m_vtOutDir = pInf->vtDir;
		m_dDn2 = dDn;

		//复制pGroup的材料信息和管径
		pGroupNext->GetAt(_T("m_sCurrSys"),m_sCurrSys);
		pGroupNext->GetAt(_T("m_sMertial"),m_sMertial);
		pGroupNext->GetAt(_T("m_idxRoom"),m_idxRoom);

		m_dDn = dDn;
		m_dDn2 = m_dDn;

		pGroupNext->GetAt(_T("m_dt"),m_dt);
		pGroupNext->GetAt(_T("COLOR"),m_nPipeColor);//系统默认KEY COLOR		

		pInf->vtDir.normalize();
		m_sInfDir2.Format(_T("%g,%g,%g"),pInf->vtDir.x,pInf->vtDir.y,pInf->vtDir.z);

		UpdateData(FALSE);
	}
}

void CTJSTDlg::OnBnClickedRadio1()
{
	UpdateData();

	switch(m_nPos)
	{
	case 0://Z+
		{
			m_vtOutDir = AcGeVector3d::kZAxis;
			m_sOutDir = _T("0,0,1");
			break;
		}
	case 1://Z-
		{
			m_vtOutDir = -AcGeVector3d::kZAxis;
			m_sOutDir = _T("0,0,-1");
			break;
		}
	case 2://Y+
		{
			m_vtOutDir = AcGeVector3d::kYAxis;
			m_sOutDir = _T("0,1,0");
			break;
		}
	case 3://Y-
		{
			m_vtOutDir = -AcGeVector3d::kYAxis;
			m_sOutDir = _T("0,-1,0");
			break;
		}
	case 4://X+
		{
			m_vtOutDir = AcGeVector3d::kXAxis;
			m_sOutDir = _T("1,0,0");
			break;
		}
	case 5://X-
		{
			m_vtOutDir = -AcGeVector3d::kXAxis;
			m_sOutDir = _T("-1,0,0");
			break;
		}
	default:
		break;
	}
	m_sInfDir2 = m_sOutDir;

	UpdateData(FALSE);
}

void CTJSTDlg::OnBnClickedRadio2()
{
	OnBnClickedRadio1();
}

void CTJSTDlg::OnBnClickedRadio3()
{
	OnBnClickedRadio1();
}

void CTJSTDlg::OnBnClickedRadio4()
{
	OnBnClickedRadio1();
}

void CTJSTDlg::OnBnClickedRadio12()
{
	OnBnClickedRadio1();
}

void CTJSTDlg::OnBnClickedRadio13()
{
	OnBnClickedRadio1();
}

int CTJSTDlg::GetX3dSolidRecs( AecDbX3dGroup*& pGroup)
{
	if (pGroup != NULL)
	{
		pGroup->RemoveAll3dSolidRec();
	}
	else
	{
		pGroup = new AecDbX3dGroup;
	}

	m_vtEnter.normalize();
	m_vtOutDir.normalize();

	AcGePoint3d ptMid = m_ptStart + m_vtEnter * AS_MUNIT(m_dLen1);
	AcGePoint3d ptOrg = ptMid;
	double dR = 0.5 * AS_MUNIT ( m_dDn );

	//主
	X3dSolidRec rec;
	AcDbX3dSolid* pXSolid = new AcDbX3dSolid;
	pXSolid->Create(AcDbX3dSolid::kPipe,ptMid,m_vtEnter,3,dR,AS_MUNIT(m_dt),2.0 * AS_MUNIT(m_dLen1 ) );//米单位
	rec.pXSolid = pXSolid;
	rec.bType = AcDb::kBoolUnite;
	_tcscpy(rec.szLockId,IDCreate());
	pGroup->AddX3dSolidRec(rec);

	//支
	double dr = 0.5 * AS_MUNIT ( m_dDn2 );
	ptMid += m_vtOutDir * 0.5 * AS_MUNIT(m_dLen2);

	pXSolid = new AcDbX3dSolid;
	pXSolid->Create(AcDbX3dSolid::kPipe,ptMid,m_vtOutDir,3,dr,AS_MUNIT(m_dt),AS_MUNIT(m_dLen2 ) );//米单位
	rec.pXSolid = pXSolid;
	rec.bType = AcDb::kBoolUnite;
	_tcscpy(rec.szLockId,IDCreate());
	pGroup->AddX3dSolidRec(rec);

	pGroup->SetOrgPoint( ptOrg );
	pGroup->SetAxis(X,AcGeVector3d::kXAxis);
	pGroup->SetAxis(Y,AcGeVector3d::kYAxis);
	pGroup->SetAxis(Z,AcGeVector3d::kZAxis);

	//不需要BOOL并到Fit中的标志
	pGroup->GetSpecialtyData()->SetAt(_T("m_sCurrSys"),m_sCurrSys);
	pGroup->GetSpecialtyData()->SetAt(_T("m_sMertial"),m_sMertial);
	pGroup->GetSpecialtyData()->SetAt(_T("m_sOutDir"),m_sOutDir);
	pGroup->GetSpecialtyData()->SetAt(_T("m_nPos"),m_nPos);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dt"),m_dt);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dDn"),m_dDn);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dLen1"),m_dLen1);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dDn2"),m_dDn2);
	pGroup->GetSpecialtyData()->SetAt(_T("m_dLen2"),m_dLen2);
	pGroup->GetSpecialtyData()->SetAt(_T("m_vtEnter"),m_vtEnter);
	pGroup->GetSpecialtyData()->SetAt(_T("m_ptStart"),m_ptStart);
	pGroup->GetSpecialtyData()->SetAt(_T("m_vtOutDir"),m_vtOutDir);
	pGroup->GetSpecialtyData()->SetAt(_T("COLOR"),m_nPipeColor);
	pGroup->GetSpecialtyData()->SetAt(_T("m_idxRoom"),m_idxRoom);

	return TRUE;
}

int CTJSTDlg::GetFitting(AecDbEwFitting*& pFit)
{
	bool bIsModify = false;
	if (pFit == NULL)
	{
		pFit = new AecDbEwFitting;
	}
	else
	{
		bIsModify = true;
	}

	m_vtEnter.normalize();
	m_vtOutDir.normalize();

	AcGePoint3d ptMid = m_ptStart + m_vtEnter * AS_MUNIT(m_dLen1);
	AcGePoint3d ptOrg = ptMid;

	pFit->GetSpecialtyData()->SetAt(KEY_RUNTIME,eTee);
	pFit->GetSpecialtyData()->SetAt(PIPE_DN,AS_MUNIT ( m_dDn ));
	pFit->GetSpecialtyData()->SetAt(PIPE_TDN,AS_MUNIT ( m_dDn2 ));
	pFit->GetSpecialtyData()->SetAt(PIPE_THICK,AS_MUNIT(m_dt));
	pFit->GetSpecialtyData()->SetAt(KEY_FITSRV,KEY_FITWPIPE);
	pFit->GetSpecialtyData()->SetAt(PIPE_OD,AS_MUNIT(m_dOD));

	AcGeVector3d vtNro = m_vtOutDir.crossProduct(m_vtEnter);
	if (!bIsModify)
	{
		pFit->GetSpecialtyData()->SetAt(KEY_MAJBR,m_vtEnter);
		pFit->GetSpecialtyData()->SetAt(KEY_MINBR,m_vtOutDir);
		pFit->GetSpecialtyData()->SetAt(KEY_MID,ptMid);
		pFit->GetSpecialtyData()->SetAt(KEY_NORMAL,vtNro);
	}


	pFit->GetSpecialtyData()->SetAt(KEY_L,2.0 * AS_MUNIT(m_dLen1 ));
	pFit->GetSpecialtyData()->SetAt(KEY_T,AS_MUNIT(m_dLen2 ));

	//不需要BOOL并到Fit中的标志
	pFit->GetSpecialtyData()->SetAt(_T("m_sCurrSys"),m_sCurrSys);
	pFit->GetSpecialtyData()->SetAt(_T("m_sMertial"),m_sMertial);
	pFit->GetSpecialtyData()->SetAt(_T("m_sOutDir"),m_sOutDir);
	pFit->GetSpecialtyData()->SetAt(_T("m_nPos"),m_nPos);
	pFit->GetSpecialtyData()->SetAt(_T("m_dt"),m_dt);
	pFit->GetSpecialtyData()->SetAt(_T("m_dDn"),m_dDn);
	pFit->GetSpecialtyData()->SetAt(_T("m_dLen1"),m_dLen1);
	pFit->GetSpecialtyData()->SetAt(_T("m_dDn2"),m_dDn2);
	pFit->GetSpecialtyData()->SetAt(_T("m_dLen2"),m_dLen2);

	if (!bIsModify)
	{
		pFit->GetSpecialtyData()->SetAt(_T("m_vtEnter"),m_vtEnter);
		pFit->GetSpecialtyData()->SetAt(_T("m_ptStart"),m_ptStart);
		pFit->GetSpecialtyData()->SetAt(_T("m_vtOutDir"),m_vtOutDir);
	}

	pFit->GetSpecialtyData()->SetAt(_T("COLOR"),m_nPipeColor);
	pFit->GetSpecialtyData()->SetAt(_T("m_idxRoom"),m_idxRoom);

	//统一管线接口
	pFit->GetSpecialtyData()->SetAt(KEY_2DSTYLE, 1);
	pFit->GetSpecialtyData()->SetAt(PIPE_DN, AS_MUNIT(m_dDn));
	pFit->GetSpecialtyData()->SetAt(PIPE_OD, AS_MUNIT(m_dOD));
	pFit->GetSpecialtyData()->SetAt(PIPE_THICK,AS_MUNIT(m_dt));
	pFit->GetSpecialtyData()->SetAt(PIPE_MATERIAL, m_sMertial);
	pFit->GetSpecialtyData()->SetAt(PIPE_SYS, m_sCurrSys);

	return TRUE;
}