#include "stdafx.h"
#include "ReducerDlg.h"
#include "DZDXDlg.h"
#include "CoreTools.h"
#include "GZCLDlg.h"

#ifndef _BYGB_
#define _BYGB_ _T("按执行标准")
#endif

extern double g_minRadio;

IMPLEMENT_DYNAMIC(CReducerDlg, CDialog)

CReducerDlg::CReducerDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CReducerDlg::IDD, pParent)
{
	m_pDb = NULL;
	m_pPipeParam = NULL;

	m_ePos = WPipe::eCen;		//类型
	m_vtECCen.set(0,0,0);
	m_vtEnter.set(0,0,0);
	m_pPipeParam = NULL;
	m_bOnlyStandardRec = FALSE;
	m_nPos = 0;
}

CReducerDlg::~CReducerDlg()
{
}

void CReducerDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Control(pDX, IDC_LISTREDUCER, m_wndListCtrl);
	DDX_Control(pDX, IDC_LISTODTHK, m_wndListODThk);
	DDX_Control(pDX, IDC_LISTELBOWRAD, m_wndElbowradList);
	DDX_Radio(pDX,IDC_RADIOC,m_nPos);
}

BEGIN_MESSAGE_MAP(CReducerDlg, CDialog)
	ON_BN_CLICKED(IDOK, &CReducerDlg::OnBnClickedOk)
	ON_BN_CLICKED(IDC_RADIOC, &CReducerDlg::OnBnClickedRadioc)
	ON_BN_CLICKED(IDC_RADIOU, &CReducerDlg::OnBnClickedRadiou)
	ON_BN_CLICKED(IDC_RADIOD, &CReducerDlg::OnBnClickedRadiod)
	ON_BN_CLICKED(IDC_BUTTON2, &CReducerDlg::OnBnClckedButton2)
	ON_BN_CLICKED(IDC_BUTTON1, &CReducerDlg::OnDZSize)
	ON_BN_CLICKED(IDC_BTADDPIPE, &CReducerDlg::OnAddPipe)
	ON_NOTIFY(LVN_ITEMCHANGED, IDC_LISTREDUCER, &CReducerDlg::OnLvnItemchangedListreducer)
END_MESSAGE_MAP()

void CReducerDlg::Set(CUIISQLiteServer* pDb,WPipe::PipeParam* pParam,AcGeVector3d& vtDirCur,BOOL bOnlyStandardRec)
{
	m_pDb = pDb;
	m_vtEnter = vtDirCur;
	m_pPipeParam = pParam;
	m_bOnlyStandardRec = bOnlyStandardRec;
}

BOOL CReducerDlg::OnInitDialog()
{
	CDialog::OnInitDialog();

	m_wndListCtrl.InsertColumn(0,_T("主管公称直径"),LVCFMT_LEFT,100);
	m_wndListCtrl.InsertColumn(1,_T("变径端公称直径"),LVCFMT_LEFT,100);
	m_wndListCtrl.InsertColumn(2,_T("长度"),LVCFMT_LEFT,60);

	m_wndListCtrl.InsertColumn(3, _T("主管接口直径"), LVCFMT_LEFT, 60);
	m_wndListCtrl.InsertColumn(4, _T("主管接口长"), LVCFMT_LEFT, 60);

	m_wndListCtrl.InsertColumn(5, _T("变径端接口直径"), LVCFMT_LEFT, 60);
	m_wndListCtrl.InsertColumn(6, _T("变径端接口长"), LVCFMT_LEFT, 60);

	m_wndListCtrl.SetExtendedStyle(LVS_EX_GRIDLINES | LVS_EX_FULLROWSELECT);

	m_wndListODThk.InsertColumn(0,_T("外径"),LVCFMT_LEFT,80);
	m_wndListODThk.InsertColumn(1,_T("壁厚"),LVCFMT_LEFT,60);
	m_wndListODThk.SetExtendedStyle(LVS_EX_GRIDLINES | LVS_EX_FULLROWSELECT);

	m_bitMapC.LoadBitmap(IDB_BITMAPREDC);
	m_bitMapU.LoadBitmap(IDB_BITMAPREDU);
	m_bitMapD.LoadBitmap(IDB_BITMAPREDD);
	m_bitMapF.LoadBitmap(IDB_BITMAPREDF);
	m_bitMapB.LoadBitmap(IDB_BITMAPREDB);

	CButton* pButton = (CButton*)GetDlgItem(IDC_RADIOC);
	if (pButton != NULL)
	{
		pButton->SetBitmap((HBITMAP)m_bitMapC);
	}

	pButton = (CButton*)GetDlgItem(IDC_RADIOU);
	if (pButton != NULL)
	{
		pButton->SetBitmap((HBITMAP)m_bitMapU);
	}

	pButton = (CButton*)GetDlgItem(IDC_RADIOD);
	if (pButton != NULL)
	{
		pButton->SetBitmap((HBITMAP)m_bitMapD);
	}

	pButton = (CButton*)GetDlgItem(IDC_RADIODF);
	if (pButton != NULL)
	{
		pButton->SetBitmap((HBITMAP)m_bitMapF);
	}

	pButton = (CButton*)GetDlgItem(IDC_RADIODB);
	if (pButton != NULL)
	{
		pButton->SetBitmap((HBITMAP)m_bitMapB);
	}

	CheckRadioButton(IDC_RADIOC,IDC_RADIODB,IDC_RADIOC);

	InitReducer();

	//EnableOffsetRadio();

	if ( m_bOnlyStandardRec )
	{
		GetDlgItem(IDC_RADIOD)->EnableWindow(FALSE);
		GetDlgItem(IDC_RADIOU)->EnableWindow(FALSE);
		GetDlgItem(IDC_RADIODF)->EnableWindow(FALSE);
		GetDlgItem(IDC_RADIODB)->EnableWindow(FALSE);
	}
	return TRUE;
}

//UPVC CPVC PVC-C PP-H (PE) HDPE
bool CReducerDlg::IsPlasticsMat(WPipe::PipeParam* pParam, CString& sODNo)
{
	sODNo = pParam->szODSn;

	const CString sPlastic = _T("UPVC CPVC PVC-C PP-H (PE) PE100 HDPE");

	CStringArray arTxts;
	CoreTools::SplitStrintToArray(sPlastic, arTxts, _T(' '));

	CString sMat = pParam->szMertial;
	CString sMatFit = pParam->szMertialFit;
	CString sTxt;
	sMat.MakeUpper();
	sMatFit.MakeUpper();

	for (int i = 0; i < arTxts.GetSize(); i++)
	{
		sTxt = arTxts.GetAt(i);

		if (sMat.Find(sTxt) != -1 ||
			sMatFit.Find(sTxt) != -1)
		{
			sODNo = sTxt;

			//以下 PVC-C  PP-H  PE100 的国标数据 替代 PVC
			if (sODNo.CompareNoCase(_T("PVC-C")) == 0)
				sODNo = _T("CPVC");

			if (sODNo.CompareNoCase(_T("(PE)")) == 0)
				sODNo = _T("PE");

			if (sODNo.CompareNoCase(_T("PE100")) == 0)
				sODNo = _T("PE");

			if (sODNo.CompareNoCase(_T("(PE100)")) == 0)
				sODNo = _T("PE");

			return true;
		}
	}
	return false;
}

void CReducerDlg::InitReducer()
{
	if (m_pDb == NULL) return;

	CString sSQL;
	CStringArray arVals;

	CString sDNo = m_pPipeParam->szODSn;
	bool bIsP = IsPlasticsMat(m_pPipeParam, sDNo);

	CString sTbl;
	if (m_pPipeParam->m_nConnectType == 0)//焊接
	{
		if (bIsP)
			sTbl = _T("AecReduceSData");
		else
			sTbl = _T("AecReduceData");

		sSQL.Format(_T("select [公称直径L],[公称直径S],[长度] from %s where [外径系列]='%s' and [公称直径L]=%d and [长度] > 0 order by [公称直径S]"),
			sTbl, sDNo, (int)(m_pPipeParam->m_dDN+0.5));
	}
	else if (m_pPipeParam->m_nConnectType == 1)//承插
	{
		sTbl = _T("AecReduceSData");

		sSQL.Format(_T("select [公称直径L],[公称直径S],[长度],[接口直径L],[承插长度L],[接口直径S],[承插长度S] from %s where [外径系列]='%s' and [公称直径L]=%d and [长度] > 0 order by [公称直径S]"),
			sTbl, sDNo, (int)(m_pPipeParam->m_dDN+0.5));

	}
	else if (m_pPipeParam->m_nConnectType == 2)//螺纹
	{
		sTbl = _T("AecReduceTData");

		sSQL.Format(_T("select [公称直径L],[公称直径S],[长度],[接口直径L],[螺纹长度L],[接口直径S],[螺纹长度S] from %s where [外径系列]='%s' and [公称直径L]=%d and [长度] > 0 and order by [公称直径S]"),
			sTbl, sDNo, (int)(m_pPipeParam->m_dDN+0.5));
	}
	else
	{
		if (!bIsP)
			sTbl = _T("AecReduceData");//	其他默认
	}


	CUIIValueTable valTable;
	m_pDb->GetSelData(sSQL, valTable);

	CString sDN1, sDN2, sL, sKey;
	CStringList lstDn2s;
	int nSize = valTable.GetTableLogicSize();
	for (int i = 0; i < nSize; i++)
	{
		arVals.RemoveAll();
		valTable.GetValueRecord(i, arVals);

		if (arVals.GetSize() >= 3)
		{
			sDN1 = arVals.GetAt(0);
			sDN2 = arVals.GetAt(1);
			sL = arVals.GetAt(2);

			sKey.Format(_T("%d-%d-%s"), __max(_ttoi(sDN1), _ttoi(sDN2)), __min(_ttoi(sDN1), _ttoi(sDN2)), sL);
			if (lstDn2s.Find(sKey) == NULL)
			{
				int nItem = m_wndListCtrl.GetItemCount();
				m_wndListCtrl.InsertItem(nItem, sDN1);
				m_wndListCtrl.SetItemText(nItem, 1, sDN2);
				m_wndListCtrl.SetItemText(nItem, 2, sL);

				if (arVals.GetSize() >= 7)
				{
					for (int n = 3;n < arVals.GetSize();n++)
					{
						m_wndListCtrl.SetItemText(nItem, n, arVals.GetAt(n));
					}
				}

				lstDn2s.AddTail(sKey);
			}
		}
	}
	valTable.RemoveAll();


	sSQL.Format(_T("select [公称直径S],[公称直径L],[长度] from %s")
		_T(" where [外径系列]='%s' and [公称直径S]=%d and [长度] > 0 order by [公称直径L]"), sTbl, sDNo, (int)m_pPipeParam->m_dDN);
	m_pDb->GetSelData(sSQL, valTable);

	nSize = valTable.GetTableLogicSize();
	for (i = 0; i < nSize; i++)
	{
		arVals.RemoveAll();
		valTable.GetValueRecord(i, arVals);

		if (arVals.GetSize() >= 3)
		{
			sDN1 = arVals.GetAt(0);
			sDN2 = arVals.GetAt(1);
			sL = arVals.GetAt(2);

			sKey.Format(_T("%d-%d-%s"), __max(_ttoi(sDN1), _ttoi(sDN2)), __min(_ttoi(sDN1), _ttoi(sDN2)), sL);
			if (lstDn2s.Find(sKey) == NULL)
			{
				int nItem = m_wndListCtrl.GetItemCount();
				m_wndListCtrl.InsertItem(nItem, sDN1);
				m_wndListCtrl.SetItemText(nItem, 1, sDN2);
				m_wndListCtrl.SetItemText(nItem, 2, sL);

				if (arVals.GetSize() >= 7)
				{
					for (int n = 3; n < arVals.GetSize(); n++)
					{
						m_wndListCtrl.SetItemText(nItem, n, arVals.GetAt(n));
					}
				}
				lstDn2s.AddTail(sKey);
			}
		}
	}

	sSQL.Format(_T("select [公称直径L],[公称直径S],[长度] from %s")
		_T(" where [外径系列]='%s' and [公称直径L]=%d and [长度] > 0 order by [公称直径S]"), sTbl, sDNo, (int)m_pPipeParam->m_dDN);
	m_pDb->GetSelData(sSQL, valTable);

	nSize = valTable.GetTableLogicSize();
	for (i = 0; i < nSize; i++)
	{
		arVals.RemoveAll();
		valTable.GetValueRecord(i, arVals);

		if (arVals.GetSize() >= 3)
		{
			sDN1 = arVals.GetAt(0);
			sDN2 = arVals.GetAt(1);
			sL = arVals.GetAt(2);

			sKey.Format(_T("%d-%d-%s"), __max(_ttoi(sDN1), _ttoi(sDN2)), __min(_ttoi(sDN1), _ttoi(sDN2)), sL);
			if (lstDn2s.Find(sKey) == NULL)
			{
				int nItem = m_wndListCtrl.GetItemCount();
				m_wndListCtrl.InsertItem(nItem, sDN1);
				m_wndListCtrl.SetItemText(nItem, 1, sDN2);
				m_wndListCtrl.SetItemText(nItem, 2, sL);

				if (arVals.GetSize() >= 7)
				{
					for (int n = 3; n < arVals.GetSize(); n++)
					{
						m_wndListCtrl.SetItemText(nItem, n, arVals.GetAt(n));
					}
				}
				lstDn2s.AddTail(sKey);
			}
		}
	}
	m_wndListCtrl.SetItemState(0, LVIS_SELECTED, LVIS_SELECTED);

	//曲率半径
	sSQL = _T("select [曲率半径] from AecElbowradius order by [曲率半径]");

	CString sRat;
	arVals.RemoveAll();
	arVals.Add(_BYGB_);
	m_pDb->GetSelData(sSQL, arVals);
	int nPos = 0;
	for (int i = 0; i < arVals.GetSize(); i++)
	{
		m_wndElbowradList.InsertString(i, arVals.GetAt(i));
		sRat = arVals.GetAt(i);
		if (fabs(_ttof(sRat) - m_pPipeParam->m_dRRatio) < 1.e-6)
		{
			nPos = i;
			if ((m_pPipeParam->m_dRRatio - g_minRadio) < 1.e-3)
				nPos = 0;
		}
	}
	m_wndElbowradList.SetCurSel(nPos);
}

void CReducerDlg::OnLvnItemchangedListreducer(NMHDR *pNMHDR, LRESULT *pResult)
{
	LPNMLISTVIEW pNMLV = reinterpret_cast<LPNMLISTVIEW>(pNMHDR);

	int nItem = pNMLV->iItem;
	if (nItem != -1)
	{
		double dDN = _ttof(m_wndListCtrl.GetItemText(nItem,1));

		CString sSQL;
		if (_tcslen(m_pPipeParam->szODSn) > 0)
		{
			sSQL.Format(_T("select [外径],[壁厚] from AecOD where [公称直径]=%d and [外径系列]='%s'"), (int)(dDN + 0.5), m_pPipeParam->szODSn);
		}
		else
		{
			sSQL.Format(_T("select [外径],[壁厚] from AecOD where [公称直径]=%d "), (int)(dDN + 0.5));
		}

		m_wndListODThk.DeleteAllItems();
		CUIIValueTable table;
		m_pDb->GetSelData(sSQL,table);
		table.ShowToListCtrl(&m_wndListODThk);

		m_wndListODThk.SetItemState(0,LVIS_SELECTED,LVIS_SELECTED);
	}
	*pResult = 0;
}

void CReducerDlg::OnBnClickedOk()
{
	UpdateData();

	POSITION ps = m_wndListCtrl.GetFirstSelectedItemPosition();
	int nIntem = m_wndListCtrl.GetNextSelectedItem(ps);
	if (nIntem == -1)
	{
		AfxMessageBox(_T("请选择变径系列!"));
		return;
	}

	ps = m_wndListODThk.GetFirstSelectedItemPosition();
	int nIntem2 = m_wndListODThk.GetNextSelectedItem(ps);
	if (nIntem2 == -1)
	{
		AfxMessageBox(_T("请选择变径后续的管子的外径壁厚系列!"));
		return;
	}

	int nSel = m_wndElbowradList.GetCurSel();
	if (nSel == -1)
	{
		AfxMessageBox(_T("请选择管子弯头曲率半径!"));
		return;
	}

	CString sText;
	m_wndElbowradList.GetText(nSel,sText);

	//曲率
	if (nSel != -1)
	{
		m_wndElbowradList.GetText(nSel, sText);
		if (sText.CompareNoCase(_BYGB_) == 0)
		{
			m_pPipeParam->m_nRadioOn = TRUE;//按国标结构长度
			m_pPipeParam->m_dRRatio = g_minRadio;//最小
		}
		else
		{
			m_pPipeParam->m_dRRatio = _ttof(sText);
		}
	}

	double dDNPre = _ttof(m_wndListCtrl.GetItemText(nIntem,0));
	m_pPipeParam->m_dDN = _ttof(m_wndListCtrl.GetItemText(nIntem,1));

	m_pPipeParam->m_dInterfaceL3 = _ttof(m_wndListCtrl.GetItemText(nIntem,2));

	double dOD = _ttof(m_wndListODThk.GetItemText(nIntem2,0));
	double dThk = _ttof(m_wndListODThk.GetItemText(nIntem2,1));

	m_pPipeParam->m_dOD = dOD;
	m_pPipeParam->m_dThick = dThk;

	switch(m_pPipeParam->m_eD)
	{
	case WPipe::eDN:
		{
			m_pPipeParam->m_dD = m_pPipeParam->m_dDN;
			break;
		}
	case WPipe::eOD:
		{
			m_pPipeParam->m_dD = m_pPipeParam->m_dOD;
			break;
		}
	case WPipe::eID:
		{
			break;
		}
	default:
		break;
	}

	m_ePos = (WPipe::EReducer)m_nPos;
	m_pPipeParam->m_vtECCen.set(0.0,0.0,0.0);
	
	if (m_ePos == WPipe::eUp)
		m_vtECCen = AcGeVector3d::kYAxis;

	if (m_ePos == WPipe::eDown)
		m_vtECCen = -AcGeVector3d::kYAxis;

	if (m_ePos == WPipe::eFr)
		m_vtECCen = AcGeVector3d::kZAxis;

	if (m_ePos == WPipe::eBk)
		m_vtECCen = -AcGeVector3d::kZAxis;

	m_pPipeParam->m_eRed = m_ePos;
	m_pPipeParam->m_vtECCen = m_vtECCen;
	
	EndDialog(IDOK);
}

void CReducerDlg::EnableOffsetRadio()
{
}

void CReducerDlg::OnBnClickedRadioc()
{
	UpdateData();
}

void CReducerDlg::OnBnClickedRadiou()
{
	UpdateData();
	EnableOffsetRadio();
}

void CReducerDlg::OnBnClickedRadiod()
{
	UpdateData();
	EnableOffsetRadio();
}

void CReducerDlg::OnBnClckedButton2()
{
	AfxMessageBox(_T("1.水平绘制时: 上-为绘制方向逆时针旋90度方向\n下-为绘制方向顺时针旋90度方向\n前-Y正向 后-Y负向\n2.立管绘制时: 上-为X方向 下-X负向 前-Y正向 后-Y负向"));
}

void CReducerDlg::OnDZSize()
{
	CString sSQL, sODNo = _T("B");

	CDZDXDlg dlg;
	dlg.m_bIsPla = IsPlasticsMat(m_pPipeParam, sODNo);
	dlg.m_nDN = (int)m_pPipeParam->m_dDN;
	dlg.m_pDb = m_pDb;
	dlg.m_sODNo = sODNo;
	dlg.m_nConnectType = m_pPipeParam->m_nConnectType;

	if (IDOK == dlg.DoModal() )
	{
		if (m_pPipeParam->m_nConnectType == 1)//承插
		{
			sSQL.Format(_T("insert into [AecReduceSData] ([公称直径L],[公称直径S],[长度],[承插长度L],[接口直径L],[承插长度S],[接口直径S],[外径系列]) values (%d,%d,%d,%.1f,%.1f,%.1f,%.1f,'%s')"),
				dlg.m_nDN, dlg.m_nDN2, dlg.m_nL,dlg.m_dFL, dlg.m_dFD,dlg.m_dFL2,dlg.m_dFD2,sODNo);
			m_pDb->ExecuteSQL(sSQL);

			sSQL.Format(_T("insert into [AecReduceSData] ([公称直径L],[公称直径S],[长度],[承插长度L],[接口直径L],[承插长度S],[接口直径S],[外径系列]) values (%d,%d,%d,%.1f,%.1f,%.1f,%.1f,'%s')"),
				dlg.m_nDN2,dlg.m_nDN, dlg.m_nL, dlg.m_dFL2, dlg.m_dFD2, dlg.m_dFL, dlg.m_dFD,  sODNo);
			m_pDb->ExecuteSQL(sSQL);


			CString sDN1, sDN2, sL;
			sDN1.Format(_T("%d"), dlg.m_nDN);
			sDN2.Format(_T("%d"), dlg.m_nDN2);
			sL.Format(_T("%d"), dlg.m_nL);

			int nItem = m_wndListCtrl.GetItemCount();
			m_wndListCtrl.InsertItem(nItem, sDN1);
			m_wndListCtrl.SetItemText(nItem, 1, sDN2);
			m_wndListCtrl.SetItemText(nItem, 2, sL);

			if (dlg.m_nDN > dlg.m_nDN2)
			{
				sL.Format(_T("%d"), (int)(dlg.m_dFD + 0.5));
				m_wndListCtrl.SetItemText(nItem, 3, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL + 0.5));
				m_wndListCtrl.SetItemText(nItem, 4, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFD2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 5, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 6, sL);
			}
			else
			{
				sL.Format(_T("%d"), (int)(dlg.m_dFD2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 3, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 4, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFD + 0.5));
				m_wndListCtrl.SetItemText(nItem, 5, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL + 0.5));
				m_wndListCtrl.SetItemText(nItem, 6, sL);
			}
			m_wndListCtrl.SetItemState(nItem, LVIS_SELECTED, LVIS_SELECTED);
		}
		else if (m_pPipeParam->m_nConnectType == 2)//螺纹
		{
			sSQL.Format(_T("insert into AecReduceData ([公称直径L],[公称直径S],[长度],[螺纹长度L],[接口直径L],[螺纹长度S],[接口直径S],[外径系列]) values (%d,%d,%d,%.1f,%.1f,%.1f,%.1f,'%s')"),
				dlg.m_nDN, dlg.m_nDN2, dlg.m_nL, dlg.m_dFL, dlg.m_dFD, dlg.m_dFL2,dlg.m_dFD2,sODNo);
			m_pDb->ExecuteSQL(sSQL);

			sSQL.Format(_T("insert into AecReduceData ([公称直径L],[公称直径S],[长度],[螺纹长度L],[接口直径L],[螺纹长度S],[接口直径S],[外径系列]) values (%d,%d,%d,%.1f,%.1f,%.1f,%.1f,'%s')"),
				dlg.m_nDN2, dlg.m_nDN, dlg.m_nL, dlg.m_dFL2, dlg.m_dFD2, dlg.m_dFL, dlg.m_dFD,  sODNo);
			m_pDb->ExecuteSQL(sSQL);

			CString sDN1, sDN2, sL;
			sDN1.Format(_T("%d"), dlg.m_nDN);
			sDN2.Format(_T("%d"), dlg.m_nDN2);
			sL.Format(_T("%d"), dlg.m_nL);

			int nItem = m_wndListCtrl.GetItemCount();
			m_wndListCtrl.InsertItem(nItem, sDN1);
			m_wndListCtrl.SetItemText(nItem, 1, sDN2);
			m_wndListCtrl.SetItemText(nItem, 2, sL);
			
			if (dlg.m_nDN > dlg.m_nDN2)
			{
				sL.Format(_T("%d"), (int)(dlg.m_dFD + 0.5));
				m_wndListCtrl.SetItemText(nItem, 3, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL + 0.5));
				m_wndListCtrl.SetItemText(nItem, 4, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFD2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 5, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 6, sL);
			}
			else
			{
				sL.Format(_T("%d"), (int)(dlg.m_dFD2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 3, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 4, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFD + 0.5));
				m_wndListCtrl.SetItemText(nItem, 5, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL + 0.5));
				m_wndListCtrl.SetItemText(nItem, 6, sL);
			}
			m_wndListCtrl.SetItemState(nItem, LVIS_SELECTED, LVIS_SELECTED);
		}
		else //焊接 其他按焊接
		{
			sSQL.Format(_T("insert into AecReduceData ([公称直径L],[公称直径S],[长度],H1,H2,[外径系列]) values (%d,%d,%d,%d,%d,'%s')"),
				dlg.m_nDN, dlg.m_nDN2, dlg.m_nL, (int)dlg.m_dFL, (int)dlg.m_dFL2, sODNo);
			m_pDb->ExecuteSQL(sSQL);

			sSQL.Format(_T("insert into AecReduceData ([公称直径L],[公称直径S],[长度],H1,H2,[外径系列]) values (%d,%d,%d,%d,%d,'%s')"),
				dlg.m_nDN2, dlg.m_nDN, dlg.m_nL,(int)dlg.m_dFL2, (int)dlg.m_dFL, sODNo);
			m_pDb->ExecuteSQL(sSQL);

			CString sDN1, sDN2, sL;
			sDN1.Format(_T("%d"), dlg.m_nDN);
			sDN2.Format(_T("%d"), dlg.m_nDN2);
			sL.Format(_T("%d"), dlg.m_nL);

			int nItem = m_wndListCtrl.GetItemCount();
			m_wndListCtrl.InsertItem(nItem, sDN1);
			m_wndListCtrl.SetItemText(nItem, 1, sDN2);
			m_wndListCtrl.SetItemText(nItem, 2, sL);

			if (dlg.m_nDN > dlg.m_nDN2)
			{
				sL.Format(_T("%d"), (int)(dlg.m_dFL + 0.5));
				m_wndListCtrl.SetItemText(nItem, 4, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 6, sL);
			}
			else
			{
				sL.Format(_T("%d"), (int)(dlg.m_dFL2 + 0.5));
				m_wndListCtrl.SetItemText(nItem, 4, sL);

				sL.Format(_T("%d"), (int)(dlg.m_dFL + 0.5));
				m_wndListCtrl.SetItemText(nItem, 6, sL);
			}

			m_wndListCtrl.SetItemState(nItem, LVIS_SELECTED, LVIS_SELECTED);
		}
	}
}

void CReducerDlg::OnAddPipe()
{
	CGZCLDlg dlg;

	POSITION ps = m_wndListCtrl.GetFirstSelectedItemPosition();
	if (ps != NULL)
	{
		int nItem = m_wndListCtrl.GetNextSelectedItem(ps);
		if (nItem != -1)
		{
			dlg.m_nDN = _ttoi(m_wndListCtrl.GetItemText(nItem, 1));
		}
	}

	dlg.m_sMat = m_pPipeParam->szMertialFit;
	dlg.m_sSCode = m_pPipeParam->szShtNo;
	dlg.m_sODSN = m_pPipeParam->szODSn;
	dlg.m_sStd = m_pPipeParam->szStdNo;

	if (IDOK == dlg.DoModal())
	{
		CString sSQL;
		sSQL.Format(_T("insert into AecOD ([公称直径],[外径],[表号],[壁厚],[重量],[外径系列],[标准]) values (%d,%d,'%s',%.1f,%.2f,'%s','%s')"),
			dlg.m_nDN, (int)dlg.m_dOD, dlg.m_sSCode, dlg.m_dt, dlg.m_dWe, dlg.m_sODSN, dlg.m_sStd);

		if (m_pDb->ExecuteSQL(sSQL))
		{
			
			double dDN = dlg.m_nDN;

			CString sSQL;
			if (_tcslen(m_pPipeParam->szODSn) > 0)
			{
				sSQL.Format(_T("select [外径],[壁厚] from AecOD where [公称直径]=%d and [外径系列]='%s'"), (int)(dDN + 0.5), m_pPipeParam->szODSn);
			}
			else
			{
				sSQL.Format(_T("select [外径],[壁厚] from AecOD where [公称直径]=%d "), (int)(dDN + 0.5));
			}

			m_wndListODThk.DeleteAllItems();

			CUIIValueTable table;
			m_pDb->GetSelData(sSQL, table);
			table.ShowToListCtrl(&m_wndListODThk);

			m_wndListODThk.SetItemState(0, LVIS_SELECTED, LVIS_SELECTED);
		}
	}
}