#pragma once

#include "AecDbCurveBase.h"
#include "AecDbObjXDataMap.h"
#include "AecComplexCurveDraw.h"
#include "AecDbX3dPart.h"

#ifndef MAX_AXISROTATS
#define MAX_AXISROTATS 16
#endif

#ifdef EARTHWORM_EXPORT
#define DLLIMPEXP __declspec(dllexport)
#else
#define DLLIMPEXP __declspec(dllimport)
#endif

#include "AecMInterfaces.h"

typedef struct PipeHatch
{
	TCHAR  szPattern[65];
	double dScale;
	double dAngle;
}PipeHatch;

typedef struct DrawContext
{
	double dD;
	AcGeVector3d vtDrawPlanNorm;
	AcGeVector3d vtDir;
	double dSingleW;
	double dDbLineW;
	int nShape;
	int nDrawGradient;
	int nColor;
	AcDbObjectId idCurLay;
	AcDbObjectId idCurLty;
	int nCrBk;
	AcDbCurve* pBaseCurXY;
}DRAWCONTEXT;

class DLLIMPEXP AecDbEwPipeBase : public AecDbCurveBase,
								  public AecMInterfaces
{
public:
	ACRX_DECLARE_MEMBERS(AecDbEwPipeBase);

protected:
	static Adesk::UInt32 kCurrentVersionNumber;

public:
	AecDbEwPipeBase(void);
	virtual ~AecDbEwPipeBase(void);

	AcGePoint3d StartPoint() const;
	AcGePoint3d EndPoint() const;

	virtual Acad::ErrorStatus	dwgInFields(AcDbDwgFiler* pFiler);
	virtual Acad::ErrorStatus	dwgOutFields(AcDbDwgFiler* pFiler) const;
	virtual Acad::ErrorStatus	dxfInFields(AcDbDxfFiler* pFiler);
	virtual Acad::ErrorStatus	dxfOutFields(AcDbDxfFiler* pFiler) const;

	virtual Acad::ErrorStatus   copyFrom(const AcRxObject* pSrc);

	//清除后续特化的二维图形数据
	virtual Acad::ErrorStatus	ClearForDraw2dables();

#if ARX>16	
	virtual void				subList() const;
	virtual Acad::ErrorStatus   subTransformBy(const AcGeMatrix3d& xform);

	virtual Acad::ErrorStatus	subGetGripPoints(AcDbGripDataPtrArray& grips,
												const double curViewUnitSize,
												const int gripSize,
												const AcGeVector3d& curViewDir,
												const int bitflags) const;

	virtual Acad::ErrorStatus	subMoveGripPointsAt(const AcDbVoidPtrArray& appData, const AcGeVector3d& offset, const int bitflags);

	virtual Acad::ErrorStatus	subGetGripPoints (AcGePoint3dArray&  gripPoints,AcDbIntArray&  osnapModes,AcDbIntArray&  geomIds) const;
	virtual Acad::ErrorStatus	subMoveGripPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset);

	virtual Acad::ErrorStatus	subGetStretchPoints(AcGePoint3dArray& stretchPoints) const;
	virtual Acad::ErrorStatus	subMoveStretchPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset);

	virtual void				GetGripText(int nPos, CString& sText);

	virtual Acad::ErrorStatus	subGetOsnapPoints(AcDb::OsnapMode     osnapMode,
													INT_PTR             gsSelectionMark,
													const AcGePoint3d&  pickPoint,
													const AcGePoint3d&  lastPoint,
													const AcGeMatrix3d& viewXform,
													AcGePoint3dArray&   snapPoints,
													AcDbIntArray&       geomIds) const;

	virtual Acad::ErrorStatus	subGetGeomExtents(AcDbExtents& extents) const;

	virtual Acad::ErrorStatus	subIntersectWith(const AcDbEntity*	pEnt, 
												AcDb::Intersect		intType, 
												AcGePoint3dArray&	points, 
												INT_PTR				thisGsMarker, 
												INT_PTR				otherGsMarker) const; 

	virtual Acad::ErrorStatus	subIntersectWith(const AcDbEntity*	pEnt,
												AcDb::Intersect		intType,
												const AcGePlane&	projPlane,
												AcGePoint3dArray&	points,
												INT_PTR				thisGsMarker,
												INT_PTR				otherGsMarker) const;
#endif

public:

	virtual AcDbCurve*			GetBaseCurve(bool bOrthoProjectToXY = false) const;
	virtual AcDbCurve*			GetNativeCurve() const;

	virtual Acad::ErrorStatus   subErase(Adesk::Boolean erasing);

	//AEC 派生
	virtual Acad::ErrorStatus	Draw2d(AcGiDraw &dc) const;
	virtual Acad::ErrorStatus	Draw3d(AcGiDraw &dc) const;

	//绘制分段
	virtual Acad::ErrorStatus   Draw2dSingleSegment(AcGiDraw &dc,AcDbPolyline* pPl) const;

	//绘制接口
	virtual Acad::ErrorStatus	DrawInfArrow(AcGiDraw &dc) const;

	virtual LPCTSTR				GetGripCmd() const;

	bool IsArcBaseCurve() const;

	void DrawSubAxis(AcGiDraw &dc,AcDbEntity* pEnt) const;

	void DrawGradient(AcGiDraw &dc,AcDbCurve* pBaseCur) const;

	void DrawHatch(AcGiDraw& dc) const;
	void DrawHatch(AcGiDraw& dc,AcDbPolyline* pPl) const;

protected:

	AcDbCurve* BaseCurveDwgInFields(AcDbDwgFiler* pFiler,int nVer = 5);//5 默认兼容之前

	AcDbRegion* RegionAcisInDwgInFields(AcDbDwgFiler* pFiler);
	AcDbRegion* RegionFromCurvesDwgInFields(AcDbDwgFiler* pFiler,Adesk::UInt32 nLen);
	AcDbRegion* SectionRegionDwgInFields(AcDbDwgFiler* pFiler,int nVer);

	Acad::ErrorStatus BaseCurveDwgOutFields(AcDbCurve* pBaseCurve,AcDbDwgFiler* pFiler) const;

	Acad::ErrorStatus RegionAcisoutDwgOutFields(AcDbDwgFiler* pFiler) const;
	Acad::ErrorStatus RegionExplodeDwgOutFields(AcDbDwgFiler* pFiler,AcDbVoidPtrArray& arCurPtrs) const;
	Acad::ErrorStatus SectionRegionDwgOutFields(AcDbDwgFiler* pFiler,int nVer) const;

	Acad::ErrorStatus AddDimPoints(AcDbGripDataPtrArray& grips,const AcGeVector3d& curViewDir,
									const AcGePoint3d& ptSta,const AcGePoint3d& ptEnd,
									const AcGePoint3d& ptMid,int nDimType,double dVal = -1.0,double dt = 0.0) const;

public:

	virtual void AssertWriteEnabled(Adesk::Boolean autoUndo = true, Adesk::Boolean recordModified = true );

	//设置中心路径,几种方式
	virtual Acad::ErrorStatus SetBaseCurve(const AcArray<EWStackPoint>& arStackPts);
	virtual Acad::ErrorStatus SetBaseCurve(const AcGePoint3dArray& arPts);
	virtual Acad::ErrorStatus SetBaseCurve(const AcDbCurve* pCurve);
	virtual Acad::ErrorStatus SetBaseCurve(const AcGePoint3d& ptSta,const AcGePoint3d& ptEnd);
	virtual Acad::ErrorStatus SetBaseCurve(const AcGePoint3d& ptSta,const AcGeVector3d& vtDir);

	/*
			     _        pt3 _	pt2
				| |		     | |
				| |		     | |
				| |          | |
				| |__________| |
				|______________|
			   pt0		O		pt1	
		O - 原点
		pt0->pt1 w
		pt1->pt2 h
		pt2->pt3 t
	*/ 
	Acad::ErrorStatus SetSection1(const double &w, const double &h, const double &t,bool bCenOrg = false);

	/*
			| |        O       | | 
			\ \                / /
			  \ \             / /
			    \ \         / /
				  \ \_pt1_/ / 
				   \______/
				      pt0
		O - 原点
		pt0->pt1 r 内径
		O->pt1 厚度
	*/
	Acad::ErrorStatus SetSection2(const double &r, const double &t,bool bCenOrg = false);

	//通用设置截面
	Acad::ErrorStatus SetSection(AcDbPolyline* pPl,const AcGePoint3d& ptCen);

	//设置截面为管道外径和壁厚
	Acad::ErrorStatus SetSection(double dD,double dt);

	//设置为方管 长x宽x厚 水平面为长,Z向为宽
	Acad::ErrorStatus SetSection(double dL,double dW,double dt);

	//设置为墙体 长(dThick)x宽(dH) 水平面为长,Z向为宽 YEL为Y偏移量
	Acad::ErrorStatus SetSection(double dThick,double dH,double dYOff,EAlign kAlign);

	//通用截面
	Acad::ErrorStatus SetSection(AcDbRegion* pReg,const AcGePoint3d& ptCen);

	//设置角钢截面
	Acad::ErrorStatus SetSection3(double dL,double dt);

	//设置为直角三角截面
	Acad::ErrorStatus SetSection3(double dLx,double dLy,double dt);

	//设置正多边形
	Acad::ErrorStatus SetSectionN(double dR, int nSides);

	//通用获取外径和壁厚
	Acad::ErrorStatus GetODAndThick(AcGePoint2d& ptODt) const;

	//获取垂直切外径和厚度
	Acad::ErrorStatus GetODAndID(AcGePoint2d& ptrODtTop,AcGePoint2d& ptrODtBom) const;

	//获取断面面积
	double GetSectionArea(bool bHasInside = false) const;

	//获取最大reg面积
	double CalBigRegionArea() const;

	//获取最大region
	AcDbRegion* GetBigRegion() const;

	//获取腔体region
	AcDbRegion* GeCavityRegion() const;

	//获取截面的复制
	AcDbRegion* GetSection() const;

	//设置界面绕轴旋转,以X 方向为基准
	Acad::ErrorStatus SetSectionRotation(double dAngle);
	double	GetSectionRotation() const;

	//获取路径总长,是否包括省略长度
	double	GetLength(bool bHasBreakOpenLen = false) const;

	//添加截断
	Acad::ErrorStatus AddBrokenOpen(double dOffFrSta,double dSize,double dTrueSize);
	Acad::ErrorStatus RemoveBrokenOpen(double dOffFrSta);
	Acad::ErrorStatus RemoveBrokenOpen(int nIndex);
	Acad::ErrorStatus GetBrokenOpenPnts(AcGePoint3dArray& arPnts) const;

	//获取首尾切线方向[接口方向]
	virtual AcGeVector3d GetHeadDir() const;
	virtual AcGeVector3d GetTailDir() const;

	//设置起点的标高,后续根据坡度计算高程
	virtual void  SetStartElevation(float dEl);
	virtual float StartElevation() const;

	//通过末点标高计算起点标高
	virtual void  SetEndElevation(float dEl); 
	virtual float EndElevation() const;

	//获取位置标高0 中心 1顶部 2内底部 3 外底部 4内顶部
	virtual float GetElevation(int nPos) const;

	//节点标高
	virtual void  SetVertexElevation(int nGripIndex,float dEl);
	virtual float GetVertexElevation(int nGripIndex) const;

	//设置坡度
	virtual bool  SetGradientAt(int nPos, double dGradient);
	virtual double GetGradientAt(int nPos) const;

	//专业数据 和绘制设置 特别说明，在实体的 draw2/3d 中使用 GetSpecialtyData,必须AcDb::kForRead!!! 否则图不能保存
	AecDbObjXDataMap* GetSpecialtyData(AcDb::OpenMode bMode = AcDb::kForWrite);
	const AecDbObjXDataMap* GetSpecialtyData() const;

	//获取二维视图显示的图形
	virtual int GetDraw2dables(Adesk::UInt16 nDrawStyle, AcDbVoidPtrArray& arEntPtrs) const;

	//获取三维显示图形
	virtual int GetDraw3dables(AcDbVoidPtrArray& arEntPtrs,bool bWriteBimInfo = false) const;

	//剖切提取，符号法,对于管线构件
	virtual bool GetSectionDraw(AcGePlane& plan,const AcGeVector3d& vtTo,AcDbVoidPtrArray&  arRegionPtrs) const;

	//剖切提取,范围面剖切Slice切割法,对于土建构件 
	virtual int GetSectionDraw(const AcGePoint3d& ptFr,const AcGePoint3d& ptTo,const AcGeVector3d& vtViewDir,const AcGeVector3d& vtTo, AcDbVoidPtrArray&  arRegionPtrs) const;

	//如下对于盾构巷道对象有意义
	//整体体积
	virtual double GetVolume(bool bIsBody = false) const;

	//腔体体积 nRoom = -1 全部
	double GetCavityVolume(int nRoom) const;

	//外表面积
	double GetOutSideArea() const;

	//内表面积
	double GetInSideArea() const;

	//壁厚 0 上壁厚 1下壁厚 2水平壁厚
	bool GetThick(int nPos,double& dThick) const;

	//接口方法重载
	MINTERFACES_METHODS

	//获取唯一性标识
	virtual LPCTSTR GetGUID() const;
	virtual void SetActive(bool bActive);
	virtual bool IsActive() const;
	virtual void NewGUID();

	Acad::ErrorStatus TransformBy(const AcGeMatrix3d xform);

	//图层和线型
	void SetSingleLayer(const AcDbObjectId& idLayer);
	AcDbObjectId GetSingleLayer() const;

	void SetSingleLineType(const AcDbObjectId& idLt);
	AcDbObjectId GetSingleLineType() const;

	void SetDoubleLayer(const AcDbObjectId& idLayer);
	AcDbObjectId GetDoubleLayer() const;

	void SetDoubleLineType(const AcDbObjectId& idLt);
	AcDbObjectId GetDoubleLineType() const;

	void SetDashLayer(const AcDbObjectId& idLayer);
	AcDbObjectId GetDashLayer() const;

	void SetCenterLayer(const AcDbObjectId& idLayer);
	AcDbObjectId GetCenterLayer() const;

	AcDb3dSolid* GetCreatPipe3dSolid() const;
	virtual int GetCreatPipe3dSolid(AcDbVoidPtrArray& ar3DSolidPtrs) const;

	bool ReadDandRatio(AcGePoint2d& ptDRatio) const;

	void SetHatch(LPCTSTR pszPatternName,double dAngle,double dScale);
	bool GetHatch(PipeHatch& sHatch) const;

	//断管符号的绘制,仅仅适用管线
	void DrawBrokenOpen(AcGiDraw &dc,AcGePoint3d& ptFr,AcGePoint3d& ptTo,double dD,AecComplexCurve& cplCurve) const;
	void DrawDashSegment(AcGiDraw &dc,AcGePoint3d& ptFr,AcGePoint3d& ptTo,double dD,AecComplexCurve& cplCurve) const;

	void DrawSide(AcGiDraw &dc,AcGePoint3d ptSideCen,AcGeVector3d vcDir,double dD,AecComplexCurve& cplCurve,bool bMirror) const;

	//设置剖切图层
	void SetSectionLayer(int nIndexFr,AcDbVoidPtrArray& arRegionPtrs,const AcDbObjectId& idLayer) const;

	//后续的法兰管子
	virtual Acad::ErrorStatus DrawFlangInf2d(AcGiDraw &dc) const;
	virtual Acad::ErrorStatus DrawFlangInf3d(AcGiDraw &dc) const;

	virtual Acad::ErrorStatus DrawUserInf(AcGiDraw &dc) const;
	virtual Acad::ErrorStatus DrawUserInf3d(AcGiDraw &dc) const;
	Acad::ErrorStatus BoolSubtractUserInf3d(AecDbX3dPart &part) const;

	Acad::ErrorStatus DrawSingle2d(AcGiDraw &dc,DrawContext& dcCon) const;
	Acad::ErrorStatus DrawDouble2d(AcGiDraw &dc,DrawContext& dcCon) const;

	virtual SHJson::WValue& ToJson(bool bExprotGeo = true) const;
	virtual bool ByJson(const SHJson::WValue &v);

	//获取墙体的所有的洞Solid
	virtual Acad::ErrorStatus GetAllHolesSolid(AcDbVoidPtrArray& arSolidPtrs,AcDbVoidPtrArray& arCenLnPtrs,const AcGeMatrix3d& xform) const;

	Acad::ErrorStatus DefaultNo();

	void SetPlotWidth(double dW);

	void GetAssocHandleObjs(AcDbObjectIdArray& arIds);

	static bool hasHatch(const AcDbEntity *pEnt, const int &var);

	virtual bool GetPositionGrip(int nIndex, AecGripData *&pGrip) const;

	//用户接口
	void AddUserInterface(const AecUserInterface& inf);

	bool RemoveUserInterface(const TCHAR* pszNo);
	bool RemoveUserInterface(int nIndex);

	int  GetUserInterfaceCount() const;
	bool GetUserInterface(int nIndex, AecUserInterface &inf) const;
	bool GetUserInterface(const AcGePoint3d &ptHit, AecUserInterface &inf) const;

	double GetGasketThick() const;

protected:

	bool ReadUserInterface(AcDbDwgFiler *pFiler);
	void WriteUserInterface(AcDbDwgFiler *pFiler) const;
protected:

	//轨迹数据
	mutable AcDbCurve*	m_pBaseCurve;

	//截面数据
	mutable AcDbRegion*	m_pRegion;

	//打断间隙段[作废]->改为预留使用
	AcArray<BreakPos>	m_arBreaks;

	//活动接口
	Adesk::Int16		m_nInfActive;
	CString				m_sGUID;
	bool				m_bActive;
	bool				m_bShowFlowDir;
	bool				m_bIsMainLock;
	bool				m_bIsMinLock;

	//专业数据
	AecDbObjXDataMap	m_mapSpecXData;

	//新版本
	AcArray< AecUserInterface> m_arUserInfs;		//用户自定义接口带管长

	//其他按通用图层和线型
	AcDbSoftPointerId		m_idSingleLayer;
	AcDbSoftPointerId		m_idSingleLnType;

	//双线图层和线型
	AcDbSoftPointerId		m_idDoubleLayer;
	AcDbSoftPointerId		m_idDoubleLnType;

	//遮挡图层
	AcDbSoftPointerId		m_idDashLayer;

	//中心线图层
	AcDbSoftPointerId		m_idCenterLayer;

protected:
	mutable AcDbVoidPtrArray m_arDrawBuffer3d1;		//子类附临时附加的图元集合
	mutable AcDbVoidPtrArray m_arDrawBuffer3d2;		//子类附临时附加的图元集合
	mutable AcDbVoidPtrArray m_ar2DDrableBufPtrs2;	//总图备份,纵断时保留总图显示
	AecGripData* m_pGripAppData;
};