#include "stdafx.h"
#include "DGJMDlg.h"
#include "KTCADUtilityEx.h"
#include "GLTKDlg.h"
#include "UITools.h"
#include "CGLFJDlg.h"
#include <algorithm>
#include "TJZJDlg.h"
#include "FZGWDlg.h"
#include "TJDJDlg.h"
#include "TJDHDlg.h"
#include "TJDUDlg.h"
#include "MHQDlg.h"
#include "JPSGDLG.h"
#include "FMHDlg.h"
#include "JKSBDlg.h"
#include "SDFJDlg.h"
#include "WSJCDlg.h"
#include "CSFCDlg.h"
#include "YWBJDlg.h"
#include "WDBJDlg.h"
#include "YYHTDlg.h"
#include "YQTCDlg.h"
#include <set>
#include <functional>
#include "HZGL_SCFJDlg.h"
#include "BimInfoDlg.h"
#include "CGLFJDlg.h"
#include "AecDbShEarthWorm.h"
#include "AecDb3dRoadAxisLine.h"

extern void SplitStrintToArray(LPCTSTR pszDescr,CStringArray& arInfo,TCHAR tcSpace);
extern Acad::ErrorStatus AddToModelSpace(AcDbEntity* pEnt,AcDbDatabase* pDb ,bool bClose );
extern bool analySlabScript(LPCTSTR script
							, int &idxRoom			// 舱室
							, int &type				// 类型（横/竖）
							, double &dist			// 距舱室 底部/左侧 距离
							, double &width			// 板宽/板高
							, double &x				// ptOff-x
							, double &y				// ptOff-y
							);
extern bool getSubRoomInfo(LPCTSTR key, int &idxRoom, double &x, double &y);
extern bool findKeysBySlab(CMapStringToString &mfcMap, ERoom &room, LPCTSTR slabScript, CString &key1, CString &key2);
extern bool hasAddin(const int &idx, LPCTSTR addinType, const CMapStringToString &mapAddtion);
extern void removeAddin(const int &idx, LPCTSTR addinType, CMapStringToString &mapAddtion);

void FreeBuffer(AcDbVoidPtrArray& arTextPtrs)
{
	AcDbEntity* pEnt = NULL;
	while (arTextPtrs.length() > 0)
	{
		pEnt = (AcDbEntity*)arTextPtrs.first();
		arTextPtrs.removeFirst();
		DELETE_PTR(pEnt);
	}
	arTextPtrs.removeAll();
}


IMPLEMENT_DYNAMIC(CDGJMDlg, CDialog)

CDGJMDlg::CDGJMDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CDGJMDlg::IDD, pParent)
	, m_dYXLen(80.0)
	, m_dT1(400.0)
	, m_dT2(400.0)
	, m_dT4(400.0)
	, m_dT5(400.0)
	, m_sRoomName(_T("电力舱"))
	, m_bShowAddtion3d(TRUE)
	, m_bBHShortDraw(TRUE)
{
	m_curSection.pReg = NULL;
	m_curSection.pt.set(0,0,0);
	m_sCrossSectionScr = _T("");
	m_bIsYXGLJD = false;

	m_curSection.dThick[0] = m_dT1;
	m_curSection.dThick[1] = m_dT2;
	m_curSection.dThick[2] = m_dT4;
	m_curSection.dThick[3] = m_dT5;

	m_pRegionRoom = NULL;
	m_sAddtionScr = _T("");
}

CDGJMDlg::~CDGJMDlg()
{
}

void CDGJMDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);

	DDX_Control(pDX, IDC_BTADDROOM2, m_wndButton2);
	DDX_Control(pDX, IDC_BTADDROOM3, m_wndButton3);
	DDX_Control(pDX, IDC_BTADDROOM4, m_wndButton4);
	DDX_Control(pDX, IDC_BTADDROOM5, m_wndButton5);
	DDX_Control(pDX, IDC_BTADDROOM6, m_wndButton6);
	DDX_Control(pDX, IDC_BTADDROOM7, m_wndButton7);
	DDX_Control(pDX, IDC_BTADDROOM8, m_wndButton8);
	DDX_Control(pDX, IDC_BTADDROOM9, m_wndButton9);
	DDX_Control(pDX, IDC_BTADDROOM10, m_wndButton10);
	DDX_Control(pDX, IDC_BTADDROOM11, m_wndButton11);

	DDX_Control(pDX, IDC_BUTTON6, m_wndButton12);
	DDX_Control(pDX, IDC_BUTTON5, m_wndButton13);
	DDX_Control(pDX, IDC_BUTTON3, m_wndButton14);

	DDX_Control(pDX, IDC_BUTTON19, m_wndButton19);
	DDX_Control(pDX, IDC_BUTTON74, m_wndButton74);
	DDX_Control(pDX, IDC_BUTTON11, m_wndButtonCo11);
	DDX_Control(pDX, IDC_BUTTON81, m_wndButton81);

	DDX_Text(pDX, IDC_EDITYX, m_dYXLen);
	DDX_Text(pDX, IDC_EDITT1, m_dT1);
	DDX_Text(pDX, IDC_EDITT2, m_dT2);
	DDX_Text(pDX, IDC_EDITT3, m_dT4);
	DDX_Text(pDX, IDC_EDITT4, m_dT5);
	DDX_Control(pDX, IDC_COMBO4, m_wndCombo4);
	DDX_Text(pDX, IDC_EDIT24, m_sRoomName);
	DDX_Control(pDX, IDC_EDIT24, m_wndEditName);

	DDX_CBString(pDX, IDC_COMBO1, m_sCity);
	DDX_CBString(pDX, IDC_COMBO2, m_sRoad);
	DDX_Check(pDX, IDC_CHECK1, m_bShowAddtion3d);
	DDX_Check(pDX, IDC_CHECK3, m_bBHShortDraw);
}

BEGIN_MESSAGE_MAP(CDGJMDlg, CDialog)
	ON_BN_CLICKED(IDOK, &CDGJMDlg::OnBnClickedOk)
	ON_BN_CLICKED(IDC_BUTTON1, &CDGJMDlg::OnBnClickedButton1)
	ON_BN_CLICKED(IDC_BTADDTODB, &CDGJMDlg::OnBnClickedBtaddtodb)
	ON_BN_CLICKED(IDC_BTSELFROMDB, &CDGJMDlg::OnBnClickedBtselfromdb)
	ON_BN_CLICKED(IDC_BUTTON4, &CDGJMDlg::OnBnClickedButton4)
	ON_BN_CLICKED(IDC_BUTTON13, &CDGJMDlg::OnBnClickedButton13)
	ON_BN_CLICKED(IDC_BUTTON17, &CDGJMDlg::OnBnClickedButton17)
	ON_BN_CLICKED(IDC_BUTTON56, &CDGJMDlg::OnBnClickedButton56)
	ON_WM_DESTROY()
	ON_BN_CLICKED(IDC_BTADDROOM2, &CDGJMDlg::OnBnClickedBtaddroom2)
	ON_BN_CLICKED(IDC_BTADDROOM3, &CDGJMDlg::OnBnClickedBtaddroom3)
	ON_BN_CLICKED(IDC_BTADDROOM4, &CDGJMDlg::OnBnClickedBtaddroom4)
	ON_BN_CLICKED(IDC_BTADDROOM5, &CDGJMDlg::OnBnClickedBtaddroom5)
	ON_MESSAGE(WM_VIEW_LBUTTONDOWN, &CDGJMDlg::OnViewLButtonDown)
	ON_CBN_SELCHANGE(IDC_COMBO4, &CDGJMDlg::OnCbnSelchangeCombo4)
	ON_EN_CHANGE(IDC_EDIT24, &CDGJMDlg::OnEnChangeEdit24)
	ON_BN_CLICKED(IDC_BTADDROOM6, &CDGJMDlg::OnBnClickedBtaddroom6)
	ON_BN_CLICKED(IDC_BTADDROOM9, &CDGJMDlg::OnBnClickedBtaddroom9)
	ON_BN_CLICKED(IDC_BTADDROOM8, &CDGJMDlg::OnBnClickedBtaddroom8)
	ON_BN_CLICKED(IDC_BTADDROOM10, &CDGJMDlg::OnBnClickedBtaddroom10)
	ON_BN_CLICKED(IDC_BTADDROOM7, &CDGJMDlg::OnBnClickedBtaddroom7)
	ON_BN_CLICKED(IDC_BTADDROOM11, &CDGJMDlg::OnBnClickedBtaddroom11)
	ON_BN_CLICKED(IDC_BUTTON6, &CDGJMDlg::OnBnClickedButton6)
	ON_BN_CLICKED(IDC_BUTTON19, &CDGJMDlg::OnBnClickedButton19)
	ON_BN_CLICKED(IDC_BUTTON74, &CDGJMDlg::OnBnClickedButton74)
	ON_BN_CLICKED(IDC_BUTTON11, &CDGJMDlg::OnBnClickedButton11)
	ON_BN_CLICKED(IDC_BUTTON81, &CDGJMDlg::OnBnClickedButton81)
	ON_BN_CLICKED(IDC_BUTTON3, &CDGJMDlg::OnBnClickedButton3)
END_MESSAGE_MAP()

BOOL CDGJMDlg::OnInitDialog()
{
	CDialog::OnInitDialog();

	// 子类化控件对象
	if (!m_wndViewCtrl.SubclassDlgItem(IDC_STATIC_FRM, this))
	{
		return FALSE;
	}

	//各种添加按钮图标化
	CBitmap bmp32;
	if (!bmp32.LoadBitmap(IDB_BITMAP10))
	{
		AfxMessageBox(_T("Can't load bitmap: %x\n"), IDB_BITMAP32);
		ASSERT(FALSE);
		return FALSE;
	}

	//附属物界面
	BITMAP bmpObj32;
	bmp32.GetBitmap(&bmpObj32);
	UINT nFlags = ILC_COLOR24 | ILC_MASK;
	m_Imagelist32.Create(32, bmpObj32.bmHeight, nFlags, 0, 0);
	m_Imagelist32.Add(&bmp32, RGB(255, 0, 0));

	m_wndButton2.SetIcon(m_Imagelist32.ExtractIcon(0));
	m_wndButton3.SetIcon(m_Imagelist32.ExtractIcon(2));
	m_wndButton4.SetIcon(m_Imagelist32.ExtractIcon(1));
	m_wndButton5.SetIcon(m_Imagelist32.ExtractIcon(3));
	m_wndButton6.SetIcon(m_Imagelist32.ExtractIcon(4));
	m_wndButton9.SetIcon(m_Imagelist32.ExtractIcon(5));
	m_wndButton8.SetIcon(m_Imagelist32.ExtractIcon(6));
	m_wndButton7.SetIcon(m_Imagelist32.ExtractIcon(8));
	m_wndButton10.SetIcon(m_Imagelist32.ExtractIcon(7));
	m_wndButton11.SetIcon(m_Imagelist32.ExtractIcon(9));
	m_wndButton12.SetIcon(m_Imagelist32.ExtractIcon(10));
	m_wndButton13.SetIcon(m_Imagelist32.ExtractIcon(11));
	m_wndButton14.SetIcon(m_Imagelist32.ExtractIcon(12));

	m_wndButton19.SetIcon(m_Imagelist32.ExtractIcon(13));
	m_wndButton74.SetIcon(m_Imagelist32.ExtractIcon(14));
	m_wndButtonCo11.SetIcon(m_Imagelist32.ExtractIcon(15));
	m_wndButton81.SetIcon(m_Imagelist32.ExtractIcon(16));

	if (!m_bIsYXGLJD)
	{
		GetDlgItem(IDC_STATIC_YX)->ShowWindow(SW_HIDE);
		GetDlgItem(IDC_EDITYX)->ShowWindow(SW_HIDE);
		GetDlgItem(IDC_STATIC_YXM)->ShowWindow(SW_HIDE);
	}

	if (m_sAddtionScr.IsEmpty() || m_curSection.pReg == NULL)
	{
		ShowLastSection();
	}
	else
	{
		ExtractRegionRooms();
		ExtrAddtionToMap();

		ShowEwSection();

		//3.显示附件
		ShowAddtion();

		//2.显示舱室名称
		ShowRoomName();
	}
	return TRUE;
}

STSection* CDGJMDlg::GetSTSection()
{
	m_curSection.sAddtionScr = m_sAddtionScr;
	return &m_curSection;
}

void CDGJMDlg::SetSTSection(STSection* pSection)
{
	if (pSection != NULL)
	{
		m_curSection.dThick[0] = pSection->dThick[0];
		m_curSection.dThick[1] = pSection->dThick[1];
		m_curSection.dThick[2] = pSection->dThick[2];
		m_curSection.dThick[3] = pSection->dThick[3];
		m_curSection.sAddtionScr = pSection->sAddtionScr;

		if (pSection->pReg != NULL)
		{
			m_curSection.pReg = (AcDbRegion*)pSection->pReg->clone();
		}
		m_sAddtionScr = pSection->sAddtionScr;
	}
}

AecDbObjXDataMap* CDGJMDlg::GetSpecMapData( )
{
	return &m_mapSpecXData;
}

void CDGJMDlg::SetInplaceEdit(bool bInput)
{
	m_bIsYXGLJD = bInput;
}

void CDGJMDlg::SetCrossSectionScr(LPCTSTR pszCrossSectionScr,const AcGePoint3d& pt)
{
	m_curSection.pt = pt;
	m_sCrossSectionScr = pszCrossSectionScr;
	m_curSection.pReg = NULL;

	int nPos = m_sCrossSectionScr.Find(_T("<ELAGN:") );
	CString sX,sY;
	CString sPt = m_sCrossSectionScr.Mid(nPos);
	sPt.TrimLeft(_T("<ELAGN:"));
	sPt.TrimRight(_T(">"));
	nPos = sPt.Find(_T(','));
	if (nPos != -1)
	{
		CStringArray arInfo;
		SplitStrintToArray(sPt,arInfo,_T(','));

		if (arInfo.GetSize() >= 2)
		{
			sX = arInfo.GetAt(0);
			sY = arInfo.GetAt(1);
			m_curSection.pt.set(_ttof(sX),_ttof(sY),0.0);

			if (arInfo.GetSize() >= 6)
			{
				m_curSection.dThick[0] = _ttof(arInfo.GetAt(2));
				m_curSection.dThick[1] = _ttof(arInfo.GetAt(3));
				m_curSection.dThick[2] = _ttof(arInfo.GetAt(4));
				m_curSection.dThick[3] = _ttof(arInfo.GetAt(5));
			}
		}
	}

	CString sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.sat");

	CStdioFile file;
	if (file.Open(sFullPath,CFile::modeCreate |CFile::modeWrite ))
	{
		CString sScr = m_sCrossSectionScr;
		if (nPos != -1)
		{
			sScr = m_sCrossSectionScr.Mid(0,nPos);
		}
		file.WriteString(sScr);
		file.Close();
	}
}

void CDGJMDlg::SetAddtionScr(LPCTSTR pszAddtionScr)
{
	m_sAddtionScr = pszAddtionScr;
	
	//m_sAddtionScr-->m_mapAddtion;
	m_mapAddtion.RemoveAll();
	ExtrAddtionToMap();
}

void CDGJMDlg::GetAddtionScr(CString& sScr) const
{
	sScr = m_sAddtionScr;
}

void CDGJMDlg::ExtrAddtionToMap( )
{
	m_mapAddtion.RemoveAll();
	int nPos = m_sAddtionScr.Find(_T("EXT:"));
	if (nPos != -1)
	{
		//EXT:
		if (nPos + 4 < m_sAddtionScr.GetLength() )
		{
			CString sName;
			CString sExt = m_sAddtionScr.Mid(nPos + 4);
			//<><><><><><>.....
			CString sScript,sScriptT,sScript2,sScriptNewVer;
			CString sKey,sOld;

			int nSta = 0,nPos2 = 0,nRoomIndex = 0,nLRPos = 0,nNo = 1;
			nPos = sExt.Find(_T('<'),nSta);
			while(nPos != -1)
			{
				nPos2 = sExt.Find(_T('>'),nPos + 1);
				if (nPos2 == -1)
					break;

				//..<***>...
				sScript = sExt.Mid(nPos + 1,nPos2 - nPos - 1);

				if (sScript.Find( EW_HOLDER ) != -1)
				{
					//HOLDER:房间|左右位置|层数|垂直间隙|水平间隙|距顶D|长度|宽度|厚度|材料|用途|偏移=(,,,)|编号
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_HOLDER);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 12)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						nLRPos = _ttoi(arInf.GetAt(1));

						if (arInf.GetSize() > 12)
						{
							nNo = _ttoi(arInf.GetAt(12));
						}
						else//旧版本
						{
							static int nNum = 1;
							nNo = nNum++;

							sOld.Format(_T("|%d"),nNo);
							sScriptNewVer =sScript + sOld;
							m_sAddtionScr.Replace(sScript,sScriptNewVer);
							sScript = sScriptNewVer;
						}

						sKey.Format(_T("%d-%d-%d-HOLDER"),nRoomIndex,nLRPos,nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_BOSS) != -1)
				{
					//<BOSS:房间|左右位置|侧间隙|水平间隙|宽|高|长|直径|用途>
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_BOSS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 9)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						if (arInf.GetSize() > 16)
							nLRPos = _ttoi(arInf.GetAt(16));

						sKey.Format(_T("%d-%d-BOSS"),nRoomIndex,nLRPos);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find( EW_HANGER ) != -1)
				{
					//HANGER:房间|层数|垂直间隙|水平间隙|左侧距离|距顶D|长度|宽度|厚度|材料|用途|偏移(,,,)
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_HANGER);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-HANGER"),nRoomIndex,0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_RINGS) != -1)
				{
					//RINGS:房间|半径|长度|位置|材料|用途
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_RINGS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT,arInf,_T('|'));

					if (arInf.GetSize() >= 9)
					{
						nNo = _ttoi(arInf.GetAt(8));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 7)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-RINGS"),nRoomIndex,0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_LAMPS) != -1)
				{
					//LAMPS:房间|长度|宽度|厚度|左侧定位|纵向间距|瓦数|名称|型好|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_LAMPS);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 12)
					{
						nNo = _ttoi(arInf.GetAt(11));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-LAMPS"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_FIREET) != -1)
				{

					//FIREET:房间|安装方式|安装位置|X直径L|Y直径H|上间隙TSP|下间隙DSP|填充量|工作温度|性能|型号|名称|类别|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_FIREET);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 16)
					{
						nNo = _ttoi(arInf.GetAt(15));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 13)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nSetup = _ttoi(arInf.GetAt(1));
						int nHSetup = _ttoi(arInf.GetAt(2));

						CString sTemp;
						sTemp.Format(_T("1%d%d"),nSetup,nHSetup);

						sKey.Format(_T("%d-%s-%d-FIREET"), nRoomIndex, sTemp, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_GUTTERWAY) != -1)
				{
					sKey.Format(_T("%d-%d-GUTTERWAY"), 0, 0);

					sScript2.Format(_T("<%s>"),sScript);
					m_mapAddtion.SetAt(sKey,sScript);
				}
				else if (sScript.Find(EW_FIREDOOR) != -1)
				{
					//FIREDOOR:房间|宽|高|位置|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_FIREDOOR);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 8)
					{
						nNo = _ttoi(arInf.GetAt(7));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 5)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-FIREDOOR"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_SECURITY) != -1)
				{
					//SECURITY:房间|大径|小径|高度|定位|间距|名称|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_SECURITY);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 11)
					{
						nNo = _ttoi(arInf.GetAt(10));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 9)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-SECURITY"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_DRAFAN) != -1)
				{
					//DRAFAN:房间|外径|长度|吊高|间距|风量|功率|机号|名称|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_DRAFAN);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));

						sKey.Format(_T("%d-%d-%d-DRAFAN"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_GASALARM) != -1)
				{
					//GASALARM:房间|位置|高度|长|宽|厚|间距|名称|等级|型号|厂家
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_GASALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 11)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						nLRPos = _ttoi(arInf.GetAt(1));

						sKey.Format(_T("%d-%d-%d-GASALARM"), nRoomIndex, nLRPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if(sScript.Find(EW_ROOMSLAB) != -1)
				{
					//ROOMSLAB: 房间|位置方向|距离|子舱宽|板厚度|偏移x|偏移y|编号
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_ROOMSLAB);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 8)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						CString sNo = arInf.GetAt(7);

						sKey.Format(_T("%d-%s-ROOMSLAB"), nRoomIndex, sNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_SMOKALARM) != -1)
				{
					//SMOKALARM:房间|位置|间距|外径|高度|名称|编号|规格|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_SMOKALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 11)
					{
						nNo = _ttoi(arInf.GetAt(10));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						sKey.Format(_T("%d-%d-%d-SMOKALARM"), nRoomIndex, 0, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_TEMPALARM) != -1)
				{
					//TEMPALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|编号|规格|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_TEMPALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));

						sKey.Format(_T("%d-%d-%d-TEMPALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_COALARM) != -1)
				{
					//COALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|浓度|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_COALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 12)
					{
						nNo = _ttoi(arInf.GetAt(11));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));
						sKey.Format(_T("%d-%d-%d-COALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_OXALARM) != -1)
				{
					//OXALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|采样方式|测量精度|厂家|偏移
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_OXALARM);
					sScriptT.TrimLeft(_T(':'));

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 13)
					{
						nNo = _ttoi(arInf.GetAt(12));
					}
					else//旧版本
					{
						static int nNum = 1;
						nNo = nNum++;

						sOld.Format(_T("|%d"), nNo);
						sScriptNewVer = sScript + sOld;
						m_sAddtionScr.Replace(sScript, sScriptNewVer);
						sScript = sScriptNewVer;
					}

					if (arInf.GetSize() >= 10)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nPos = _ttoi(arInf.GetAt(1));
						sKey.Format(_T("%d-%d-%d-OXALARM"), nRoomIndex, nPos, nNo);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
					}
				}
				else if (sScript.Find(EW_ROOMNAME) != -1)
				{
					//ROOMNAME:房间|中心x|中心y|名称  -->x,y放大100倍
					sScriptT = sScript;
					sScriptT.TrimLeft(EW_ROOMNAME);
					sScriptT.TrimLeft(_T(':'));

					//判断是否分舱
					//double dCenX = (pt[0].x + pt[2].x) / 2.0;
					//double dCenY = (pt[0].y + pt[2].y) / 2.0;
					//CString sKey,sVal;
					//sKey.Format(_T("%d|%d|%d|ROOMNAME"), nRoomIndex, (int)( 100.0 * dCenX ),(int)(100.0 * dCenY) );//放大100倍
					//sVal.Format(_T("<ROOMNAME:%d|%d|%d|%s>"),nRoomIndex,(int)( 100.0 * dCenX ),(int)(100.0 * dCenY),m_sRoomName);
					//m_mapAddtion.SetAt(sKey,sVal);

					CStringArray arInf;
					SplitStrintToArray(sScriptT, arInf, _T('|'));

					if (arInf.GetSize() >= 4)
					{
						nRoomIndex = _ttoi(arInf.GetAt(0));
						int nCenX = _ttoi(arInf.GetAt(1));
						int nCenY = _ttoi(arInf.GetAt(2));
						sName = arInf.GetAt(3);

						sKey.Format(_T("%d|%d|%d|ROOMNAME"),nRoomIndex,nCenX,nCenY);

						sScript2.Format(_T("<%s>"),sScript);
						m_mapAddtion.SetAt(sKey,sScript2);
						m_mapIndexToName.SetAt(arInf.GetAt(0),sName);
					}
				}
				else if (sScript.Find(EW_CHARMNO) != -1)
				{
					//盾构没有倒角
				}

				nSta += sScript.GetLength();
				nPos = sExt.Find(_T('<'),nSta);
			}
		}
	}
}

void CDGJMDlg::FormatAddtionScr()
{
	m_sAddtionScr = _T("");
	CString sExt = _T("EXT:"),sKey,sExtVal;
	for (POSITION ps = m_mapAddtion.GetStartPosition();ps != NULL;)
	{
		m_mapAddtion.GetNextAssoc(ps,sKey,sExtVal);
		sExt += sExtVal;
	}
	if (sExt.CompareNoCase(_T("EXT:")) != 0)
	{
		m_sAddtionScr += sExt;
	}
}

void CDGJMDlg::OnBnClickedBtaddtodb()
{
	UpdateData(TRUE);

	if (m_dT1 < 1.e-1 || m_dT2 < 1.e-1 || 
		m_dT4 < 1.e-1 || m_dT5 < 1.e-1)
	{
		AfxMessageBox(_T("请检查管廊上下两侧壁厚是否合理!"));
		return;
	}

	if (m_curSection.pReg != NULL)
	{
		CString sFullPath = FilePath::GetSysDir();
		sFullPath.MakeLower();
		sFullPath += _T("\\DGJM.sat");

		CString sRegionScrp = _T("");
		CString sLine;
		AcDbVoidPtrArray arBodyPtrs;
		arBodyPtrs.append(m_curSection.pReg);

		if ( Acad::eOk == AcDbBody::acisOut(sFullPath,arBodyPtrs) )
		{
			CFile file;
			if (file.Open(sFullPath,CFile::modeRead))
			{
				ULONGLONG dwFileLength = file.GetLength();
				char* pszTxt = new char[dwFileLength];

				file.Read(pszTxt,dwFileLength);

				sRegionScrp = pszTxt;
				delete [] pszTxt;

				file.Close();
			}
		}

		CString sElPt;
		sElPt.Format(_T("<ELAGN:%g,%g,%g,%g,%g,%g>"),m_curSection.pt.x,m_curSection.pt.y,m_dT1,m_dT2,m_dT4,m_dT5);
		sRegionScrp += sElPt;

		CGLTKDlg dlg(CGLTKDlg::eInput);
		dlg.SetCrossSectionScr(sRegionScrp);
		dlg.SetAddtionScr(m_sAddtionScr);
		dlg.DoModal();
	}
}

void CDGJMDlg::OnBnClickedBtselfromdb()
{
	CGLTKDlg dlg(CGLTKDlg::eSelect);
	if ( IDOK == dlg.DoModal() )
	{
		CString sScr,sScrT;
		if (dlg.GetCrossSectionScr(sScr))
		{
			dlg.GetAddtionScr(m_sAddtionScr);

			sScrT = sScr;
			if (sScr.Find(_T("RECT:")) != -1)
			{
				AfxMessageBox(_T("选择的是脚本不是盾构管廊截面!"));
				return;
			}

			CString sFullPath = FilePath::GetSysDir();
			sFullPath.MakeLower();
			sFullPath += _T("\\DGJM.sat");

			int nPos = sScr.Find(_T("<ELAGN:"));
			if (nPos != -1)
			{
				sScrT = sScr.Mid(0,nPos);
			}

			CString sX,sY;
			CString sPt = sScr.Mid(nPos);
			sPt.TrimLeft(_T("<ELAGN:"));
			sPt.TrimRight(_T(">"));
			nPos = sPt.Find(_T(','));
			if (nPos != -1)
			{
				CStringArray arInfo;
				SplitStrintToArray(sPt,arInfo,_T(','));
				
				if (arInfo.GetSize() >= 2)
				{
					sX = arInfo.GetAt(0);
					sY = arInfo.GetAt(1);
					m_curSection.pt.set(_ttof(sX),_ttof(sY),0.0);

					if (arInfo.GetSize() >= 6)
					{
						m_curSection.dThick[0] = _ttof(arInfo.GetAt(2));
						m_curSection.dThick[1] = _ttof(arInfo.GetAt(3));
						m_curSection.dThick[2] = _ttof(arInfo.GetAt(4));
						m_curSection.dThick[3] = _ttof(arInfo.GetAt(5));

						m_dT1 = m_curSection.dThick[0];
						m_dT2 = m_curSection.dThick[1];
						m_dT4 = m_curSection.dThick[2];
						m_dT5 = m_curSection.dThick[3];
					}
				}
			}

			CStdioFile file;
			if (file.Open(sFullPath,CFile::modeCreate |CFile::modeWrite ))
			{
				file.WriteString(sScrT);
				file.Close();
			}

			AcDbVoidPtrArray arBodyPtrs;
			if ( Acad::eOk == AcDbBody::acisIn(sFullPath,arBodyPtrs) )
			{
				if (arBodyPtrs.length() > 0)
				{
					AcDbEntity* pEnt = (AcDbEntity*)arBodyPtrs.first();
					AcDbRegion* pRegion = AcDbRegion::cast(pEnt);
					if (pRegion != NULL)
					{
						m_curSection.pReg = pRegion;
					}

					m_curSection.sAddtionScr = m_sAddtionScr;
					if (m_curSection.pReg != NULL)
					{
						ExtractRegionRooms();
						ShowEwSection();

						//2.显示舱室名称
						ShowRoomName();

						//3.显示附件
						ShowAddtion();
					}
				}
			}
			UpdateData(FALSE);
			UpdateWindow();
		}
	}
}

void CDGJMDlg::ShowLastSection()
{
	//1.截面
	CString sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.sat");

	CFileFind find;
	if (!find.FindFile(sFullPath))
	{
		return;
	}

	AcDbVoidPtrArray arBodyPtrs;
	if ( Acad::eOk == AcDbBody::acisIn(sFullPath,arBodyPtrs) )
	{
		if (arBodyPtrs.length() > 0)
		{
			AcDbEntity* pEnt = (AcDbEntity*)arBodyPtrs.first();
			AcDbRegion* pRegion = AcDbRegion::cast(pEnt);
			if (pRegion != NULL)
			{
				m_curSection.pReg = pRegion;
			}

			if (m_curSection.pReg != NULL)
			{
				ExtractRegionRooms();
				ShowEwSection();
			}
		}
	}

	//2.壁厚
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.ext");

	CString sLine;
	CStdioFile file;
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		file.ReadString(sLine);
		file.Close();

		sLine.TrimRight(_T('\n'));
		CStringArray arInf;
		SplitStrintToArray(sLine,arInf,_T(','));

		if (arInf.GetSize() >= 6)
		{
			m_curSection.pt.set(_ttof(arInf.GetAt(0)),_ttof(arInf.GetAt(1)),0.0);
			m_dT1 = _ttof(arInf.GetAt(2));
			m_dT2 = _ttof(arInf.GetAt(3));
			m_dT4 = _ttof(arInf.GetAt(4));
			m_dT5 = _ttof(arInf.GetAt(5));

			m_curSection.dThick[0] = m_dT1;
			m_curSection.dThick[1] = m_dT2;
			m_curSection.dThick[2] = m_dT4;
			m_curSection.dThick[3] = m_dT5;
		}
	}

	//3.名称
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.nam");

	CString sIndex,sName;
	AcDbText* pText = NULL;
	AcGePoint3d ptIns;

	CStringArray arInf;
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		sLine = _T("");
		while(file.ReadString(sLine))
		{
			sLine.TrimRight(_T('\n'));
			arInf.RemoveAll();
			SplitStrintToArray(sLine,arInf,_T(','));

			if (arInf.GetSize() >= 4)
			{
				sIndex = arInf.GetAt(0);
				sName = arInf.GetAt(1);
				m_mapIndexToName.SetAt(sIndex,sName);
			}
		}
		file.Close();
	}

	ExtractRegionRooms();

	//4.显示附件
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.adt");
	if (file.Open(sFullPath,CFile::modeRead | CFile::typeText))
	{
		sLine = _T("");
		file.ReadString(sLine);
		sLine.TrimRight(_T('\n'));

		m_sAddtionScr = sLine;

		m_mapAddtion.RemoveAll();
		ExtrAddtionToMap();

		file.Close();
	}
	ShowAddtion();
	ShowRoomName();

	UpdateData(FALSE);
	UpdateWindow();
}

void CDGJMDlg::OnBnClickedOk()
{
	FormatAddtionScr();

	OnOK();
}

void CDGJMDlg::OnBnClickedButton1()
{
	EnableWindow(FALSE);
	CWnd* pFrame = acedGetAcadFrame();
	pFrame->EnableWindow(TRUE);
	ShowWindow(SW_HIDE);
	pFrame->SetFocus();

	do
	{
		ads_point pt,pt2;
		ads_name ent;

		int nRes = acedEntSel(_T("\n请选择一个面域:"), ent, pt);
		if (nRes != RTNORM) break;

		AcDbObjectId id;
		acdbGetObjectId(id, ent);
		m_curSection.clear();
		nRes = acedGetPoint(NULL, _T("\n请选一点做为标高的基准点:"),pt);
		if (nRes != RTNORM) break;

		acdbUcs2Wcs(pt, pt2, false);
		m_curSection.pt = asPnt3d(pt2);

		AcGeMatrix3d xform;
		AcGeVector3d vtMove = m_curSection.pt.asVector();
		vtMove.negate();
		xform.setToTranslation(vtMove);

		OPENOBJ_BEGIN(id, AcDb::kForRead, AcDbRegion, pReg)
		if (pReg)
		{
			m_curSection.pReg = (AcDbRegion*)pReg->clone();
			m_curSection.pReg->transformBy(xform);
			m_curSection.pt.transformBy(xform);
			m_curSection.sAddtionScr = _T("");//上次清空
			m_sAddtionScr = _T("");//上次清空
		}
		OPENOBJ_END()

	} while (false);

	pFrame->EnableWindow(FALSE);
	ShowWindow(SW_SHOW);
	EnableWindow(TRUE);
	UpdateData(FALSE);

	ExtractRegionRooms();
	ShowEwSection();
}

void CDGJMDlg::RedrawDrawRegion()
{
	//1.显示截面
	ShowEwSection();

	//2.显示舱室名称
	ShowRoomName();

	//3.显示附件
	ShowAddtion();

	//4.显示当前舱室
	AcGsView* pView = m_wndViewCtrl.view();
	AcGsModel* pModel = m_wndViewCtrl.model();

	if (pView != NULL && m_pRegionRoom != NULL)
	{
		pView->add(m_pRegionRoom, pModel);
		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();		
	}
}

void CDGJMDlg::ShowAddtion()
{
	//合成脚本
	FormatAddtionScr();

	if (!m_sAddtionScr.IsEmpty())
	{
		AecDbShEarthWorm shWorm;

		AcGePoint3d ptEnd(100,0,0);
		AcDbLine ln(AcGePoint3d(0,0,0),ptEnd);

		AecDb3dRoadAxisLine* pRoadLn = new AecDb3dRoadAxisLine;
		pRoadLn->AppendCurveSeg(&ln);

		shWorm.GetSpecialtyData()->SetAt(KEY_2DSTYLE, 2);
		shWorm.SetSection(m_curSection.pReg,m_curSection.pt);
		shWorm.SetBaseCurve(pRoadLn);
		shWorm.SetAddtionScr(m_sAddtionScr);

		AcDbVoidPtrArray arCurPtrs;
		shWorm.GetAddtionSection(arCurPtrs);

		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < arCurPtrs.length();i++)
		{
			pEnt = (AcDbEntity*)arCurPtrs.at(i);
			pView->add(pEnt, pModel);
			m_arDrawBuffer.append(pEnt);
		}

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.RedrawWindow();	
	}
}

void CDGJMDlg::ShowRoomName()
{
	CString sKey,sName;
	AcDbRegion* pRegion = NULL;
	AcDbText* pText = NULL;

	//延着整体圆排序
	double             perimeter;
	double             area;
	AcGePoint2d        centroid;
	double             momInertia[2];
	double             prodInertia;
	double             prinMoments[2];
	AcGeVector2d       prinAxes[2];
	double             radiiGyration[2];
	AcGePoint2d        extentsLow;
	AcGePoint2d        extentsHigh;

	AcGePoint3d ptIns;
	for (int i = 0;i < m_arRegionRooms.length();i++)
	{
		pRegion = (AcDbRegion*)m_arRegionRooms.at(i);

		pRegion->getAreaProp(AcGePoint3d::kOrigin,AcGeVector3d::kXAxis,AcGeVector3d::kYAxis,
							perimeter,
							area,
							centroid,
							momInertia,
							prodInertia,
							prinMoments,
							prinAxes,
							radiiGyration,
							extentsLow,
							extentsHigh);

		sKey.Format(_T("%d"),i);
		ptIns.set(centroid.x,centroid.y,0.0);

		if (m_mapIndexToName.Lookup(sKey,sName))
		{
			pText = NULL;
			if (m_mapIndexToDbText.Lookup(sKey,(void*&)pText))
			{
				pText->setPosition(ptIns);
				pText->setTextString(sName);
			}
			else
			{
				ptIns.set(centroid.x,centroid.y,0.0);
				pText = new AcDbText(ptIns,sName,acdbCurDwg()->textstyle(),0.15,0.0);
				pText->setHeight(.15);
				pText->setColorIndex(1);
				pText->setTextStyle(acdbCurDwg()->textstyle());
				pText->setHorizontalMode(AcDb::kTextLeft);
				m_mapIndexToDbText.SetAt(sKey,pText);
			}

			if (pText != NULL)
			{
				m_wndViewCtrl.view()->erase(pText);
				m_wndViewCtrl.Add(pText);

				if (m_arDrawBuffer.find(pText) == -1)
					m_arDrawBuffer.append(pText);
			}
		}
	}
	m_wndViewCtrl.view()->invalidate();
	m_wndViewCtrl.Invalidate();
	m_wndViewCtrl.RedrawWindow();
}

void CDGJMDlg::ShowEwSection()
{
	if (m_curSection.pReg != NULL)
	{
		m_arDrawBuffer.removeAll();
		m_wndViewCtrl.clearAll();
		m_wndViewCtrl.init(true);
		m_wndViewCtrl.SetOrbitFlag(OBF_PAN | OBF_ZOOM | OBF_COTE);

		AcDbExtents exts;
		m_curSection.pReg->getGeomExtents(exts);
		m_wndViewCtrl.InitFromCurrentView2D(exts,true);

		m_wndViewCtrl.Add(m_curSection.pReg);
		m_arDrawBuffer.append(m_curSection.pReg);

		m_wndViewCtrl.view()->invalidate();
		m_wndViewCtrl.Invalidate();
		m_wndViewCtrl.RedrawWindow();
	}	
}

void CDGJMDlg::OnBnClickedButton4()
{
	double dt = 0.0;
	if (GetThick(dt))
	{
		m_dT1 = dt;
		UpdateData(FALSE);
	}
}

void CDGJMDlg::OnBnClickedButton13()
{
	double dt = 0.0;
	if (GetThick(dt))
	{
		m_dT2 = dt;
		UpdateData(FALSE);
	}
}

void CDGJMDlg::OnBnClickedButton17()
{
	double dt = 0.0;
	if (GetThick(dt))
	{
		m_dT4 = dt;
		UpdateData(FALSE);
	}	
}

void CDGJMDlg::OnBnClickedButton56()
{
	double dt = 0.0;
	if (GetThick(dt))
	{
		m_dT5 = dt;
		UpdateData(FALSE);
	}	
}

bool CDGJMDlg::GetThick(double& dt)
{
	acedGetAcadFrame()->EnableWindow(TRUE);
	ShowWindow(SW_HIDE);
	acedGetAcadFrame()->SetFocus();

	double dDist = 0.0;
	ads_point pt1,pt2;
	int nRes = acedGetPoint(NULL,_T("\n请选择测量尺寸第一点:"),pt1);
	if (nRes == RTNORM)
	{
		nRes = acedGetPoint(pt1,_T("\n请选择测量尺寸第一点:"),pt2);
		if (nRes == RTNORM)
		{
			dDist = acutDistance(pt1,pt2);
			dDist *= 1000.0;//米单位
			
			dt = (int)(dDist);

			ShowWindow(SW_SHOW);
			return true;
		}
	}
	ShowWindow(SW_SHOW);
	SetFocus();
	acedGetAcadFrame()->EnableWindow(FALSE);
	EnableWindow(TRUE);
	return false;
}

void CDGJMDlg::OnDestroy()
{
	CDialog::OnDestroy();

	//1.写壁厚
	CString sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.ext");

	CString sLine;
	CStdioFile file;
	if (file.Open(sFullPath,CFile::modeCreate | CFile::modeWrite | CFile::typeText))
	{
		sLine.Format(_T("%g,%g,%g,%g,%g,%g\n"),m_curSection.pt.x,m_curSection.pt.y,m_dT1,m_dT2,m_dT4,m_dT5);
		file.WriteString(sLine);
		file.Close();
	}

	//2.写名称
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.nam");

	CString sKey;
	AcDbText* pText = NULL;
	AcGePoint3d ptIns;

	if (file.Open(sFullPath,CFile::modeCreate | CFile::modeWrite | CFile::typeText))
	{
		for (POSITION ps = m_mapIndexToDbText.GetStartPosition();ps != NULL;)
		{
			m_mapIndexToDbText.GetNextAssoc(ps,sKey,(void*&)pText);
			ptIns = pText->position();
			sLine.Format(_T("%s,%s,%g,%g\n"),sKey,pText->textStringConst(),ptIns.x,ptIns.y);
			file.WriteString(sLine);
		}
		file.Close();
	}

	//3.附件
	sFullPath = FilePath::GetSysDir();
	sFullPath.MakeLower();
	sFullPath += _T("\\DGJM.adt");
	if (file.Open(sFullPath,CFile::modeCreate | CFile::modeWrite | CFile::typeText))
	{
		file.WriteString(m_sAddtionScr);
		file.Close();
	}
}

LRESULT CDGJMDlg::OnViewLButtonDown(WPARAM wp, LPARAM lp)
{
	//鼠标点击的点
	AcGePoint3d* pPt = (AcGePoint3d*)lp;
	pPt->z = 0.0;

	if (m_curSection.pReg != NULL)
	{
		AcGsView* pView = m_wndViewCtrl.view();
		AcGsModel* pModel = m_wndViewCtrl.model();

		//判断点落在region内
		AcDbExtents ext;
		AcDbCurve* pPl = NULL;
		AcDbRegion* pRegion = NULL;
		AcDbRay rayx1,rayx2;
		AcDbCurve* pCurve = NULL;
		AcGePoint3dArray arPts1,arPts2;

		rayx1.setBasePoint(*pPt);
		rayx1.setUnitDir(AcGeVector3d::kXAxis);

		rayx2.setBasePoint(*pPt);
		rayx2.setUnitDir(-AcGeVector3d::kXAxis);

		AcDbVoidPtrArray arCurPtrs,arSubEntPtrs;
		for (int i = 0;i < m_arRegionRooms.length();i++)
		{
			pRegion = (AcDbRegion*)m_arRegionRooms.at(i);

			arCurPtrs.removeAll();
			pRegion->explode(arCurPtrs);

			arSubEntPtrs.removeAll();
			pCurve = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs,arSubEntPtrs);
			pPl = AcDbCurve::cast(pCurve);
			if (pPl != NULL)
			{
				pPl->intersectWith(&rayx1,AcDb::kOnBothOperands,arPts1);
				pPl->intersectWith(&rayx2,AcDb::kOnBothOperands,arPts2);

				if (!arPts1.isEmpty() && !arPts2.isEmpty())
				{
					if (pView != NULL && m_pRegionRoom != NULL)
					{
						pView->erase(m_pRegionRoom);
					}

					m_pRegionRoom = pRegion;
					m_pRegionRoom->setColorIndex(6);
					
					if (pView != NULL)
					{
						pView->add(m_pRegionRoom, pModel);
					}

					delete pPl;
					m_wndViewCtrl.view()->invalidate();
					m_wndViewCtrl.RedrawWindow();
					break;
				}
				delete pPl;
			}	
		}
	}
	return 0L;
}

void CDGJMDlg::OnCbnSelchangeCombo4()
{
	int nSel = m_wndCombo4.GetCurSel();
	if (nSel != -1)
	{
		m_wndCombo4.GetLBText(nSel,m_sRoomName);
		UpdateData(FALSE);
		m_wndEditName.SetWindowText(m_sRoomName);
	}
	RedrawDrawRegion();
}

void CDGJMDlg::OnEnChangeEdit24()
{
	UpdateData();
	CString sTemp;
	sTemp.Format(_T("%d"),GetIdxOfRoom());
	m_mapIndexToName.SetAt(sTemp,m_sRoomName);

	int nRoomIndex = GetIdxOfRoom();
	if (nRoomIndex != -1)
	{
		//延着整体圆排序
		double             perimeter;
		double             area;
		AcGePoint2d        centroid;
		double             momInertia[2];
		double             prodInertia;
		double             prinMoments[2];
		AcGeVector2d       prinAxes[2];
		double             radiiGyration[2];
		AcGePoint2d        extentsLow;
		AcGePoint2d        extentsHigh;

		AcGePoint3d ptIns;
		AcDbRegion* pRegion = (AcDbRegion*)m_arRegionRooms.at(nRoomIndex);

		pRegion->getAreaProp(AcGePoint3d::kOrigin,AcGeVector3d::kXAxis,AcGeVector3d::kYAxis,
			perimeter,
			area,
			centroid,
			momInertia,
			prodInertia,
			prinMoments,
			prinAxes,
			radiiGyration,
			extentsLow,
			extentsHigh);

		int nCenX = (int)(centroid.x + 0.5);
		int nCenY = (int)(centroid.y + 0.5);

		CString sKey,sScript2;
		sKey.Format(_T("%d|%d|%d|ROOMNAME"),nRoomIndex,nCenX,nCenY);

		//sKey.Format(_T("%d|%d|%d|ROOMNAME"), nRoomIndex, (int)( 100.0 * dCenX ),(int)(100.0 * dCenY) );//放大100倍
		//sVal.Format(_T("<ROOMNAME:%d|%d|%d|%s>"),nRoomIndex,(int)( 100.0 * dCenX ),(int)(100.0 * dCenY),m_sRoomName);
		//m_mapAddtion.SetAt(sKey,sVal);

		sScript2.Format(_T("<ROOMNAME:%d|%d|%d|%s>"),nRoomIndex,nCenX,nCenY,m_sRoomName);
		m_mapAddtion.SetAt(sKey,sScript2);
	}

	UpdateData(FALSE);

	RedrawDrawRegion();
}

void CDGJMDlg::ExtractRegionRooms()
{
	if (m_curSection.pReg != NULL)
	{
		AecDbShEarthWorm::ExtractRegionRooms(m_arRegionRooms,m_curSection.pReg);
	}
}

void CDGJMDlg::GetRoomNames(CStringArray& arRoomNames)
{
	CString sKey,sName;
	for (int i = 0;i < m_arRegionRooms.length();i++)
	{
		sKey.Format(_T("%d"),i);
		if (m_mapIndexToName.Lookup(sKey,sName))
		{
			arRoomNames.Add(sName);
		}
		else
		{
			break;
		}
	}

	//ROOMNAME: 房间|中心x|中心y|名称  -->x,y放大100倍
	//<ROOMNAME:%d|%d|%d|%s>
	int nPos = -1;
	CString sVal;
	for (POSITION ps = m_mapAddtion.GetStartPosition();ps != NULL;)
	{
		m_mapAddtion.GetNextAssoc(ps,sKey,sVal);

		if (sVal.Find(EW_ROOMNAME) != -1)
		{
			nPos = sVal.ReverseFind(_T('|'));
			if (nPos != -1 && nPos < sVal.GetLength() - 1)
			{
				sName = sVal.Mid(nPos + 1);
				arRoomNames.Add(sName);
			}
		}
	}
}

int CDGJMDlg::GetIdxOfRoom()
{
	if (m_pRegionRoom == NULL)
		return -1;

	AcDbRegion* pRegion = NULL;
	for (int i = 0;i < m_arRegionRooms.length();i++)
	{
		pRegion = (AcDbRegion*)m_arRegionRooms.at(i);
		if (pRegion == m_pRegionRoom)
		{
			return i;
		}
	}
	return -1;
}

//添加支架
void CDGJMDlg::OnBnClickedBtaddroom2()
{
	if (m_pRegionRoom == NULL)
	{
		AfxMessageBox(_T("请选择舱室添加支吊架!"));
		return;
	}

	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		CString sKey, sName;
		sKey.Format(_T("%d"), nIndex);
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CStringArray arRooms;
			GetRoomNames(arRooms);

			if (arRooms.IsEmpty())
			{
				AfxMessageBox(_T("请先设置舱室名称!"));
				return;
			}
			CGLFJDlg dlg1(PIPECABLE::eHOLDER, nIndex, m_sAddtionScr, sOffsets, m_mapAddtion, arRooms);
			dlg1.DoModal();

			//刷新
			RedrawDrawRegion();
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
}

//添加吊架
void CDGJMDlg::OnBnClickedBtaddroom3()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CStringArray arRooms;
			GetRoomNames(arRooms);

			if (arRooms.IsEmpty())
			{
				AfxMessageBox(_T("请先设置舱室名称!"));
				return;
			}
			CGLFJDlg dlg1(PIPECABLE::eHANGER, nIndex, m_sAddtionScr, sOffsets, m_mapAddtion, arRooms);
			dlg1.DoModal();

			//刷新
			RedrawDrawRegion();
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
}

//预留管位
void CDGJMDlg::OnBnClickedBtaddroom4()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		CString sKey,sName;
		sKey.Format(_T("%d"),GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey,sName) )
		{
			//预留官位只能放在主舱!!!!
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CFZGWDlg dlg;
			dlg.m_data.m_sSpec = sName;
			if ( IDOK == dlg.DoModal() )
			{
				CString sBoss;
				CString sPos = dlg.GetScript(sBoss,nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%s-BOSS"), nIndex, sPos);

				if (dlg.m_bRemove)
				{
					m_mapAddtion.RemoveKey(sKey);
				}
				else
				{
					if (!m_mapAddtion.Lookup(sKey, sBoss))
						 m_mapAddtion.SetAt(sKey, sBoss);
					else
					{
						CString str(_T(""));
						str.Format(_T("管位编号：%s已经存在！"), sPos);
						AfxMessageBox(str);
					}
				}

				//刷新
				RedrawDrawRegion();
			}	
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室预留管位!"));
	}
}

//加吊环
void CDGJMDlg::OnBnClickedBtaddroom5()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		CString sKey,sName;
		sKey.Format(_T("%d"),GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey,sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CTJDHDlg dlg;
			if ( IDOK == dlg.DoModal() )
			{
				CString sRings;
				int nPos = dlg.GetScript(sRings,nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-RINGS"),nIndex,nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("RINGS"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("RINGS"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sRings);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}

				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加吊环!"));
	}
}

//加灯具
void CDGJMDlg::OnBnClickedBtaddroom6()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		CString sKey,sName;
		sKey.Format(_T("%d"),GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey,sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CTJDUDlg dlg;
			if ( IDOK == dlg.DoModal() )
			{
				CString sLamps;
				int nPos = dlg.GetScript(sLamps, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-LAMPS"),nIndex,nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("LAMPS"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("LAMPS"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sLamps);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}

				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加灯具!"));
	}
}

//加灭火器
void CDGJMDlg::OnBnClickedBtaddroom9()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CMHQDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sFireet;
				int nPos = dlg.GetScript(sFireet, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-1%d%d-%d-FIREET"), nIndex, dlg.m_nSetup, dlg.m_nHSetup, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("FIREET"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("FIREET"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sFireet);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}
				
				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加灭火器!"));
	}
}

//加防火门
void CDGJMDlg::OnBnClickedBtaddroom8()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//FIREDOOR:房间|宽|高|型号|厂家
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CFMHDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sFireet;
				int nPos = dlg.GetScript(sFireet, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-FIREDOOR"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("FIREDOOR"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("FIREDOOR"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sFireet);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}
				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加防火门!"));
	}
}

//家监控
void CDGJMDlg::OnBnClickedBtaddroom10()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//FIREDOOR:房间|宽|高|型号|厂家
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CJKSBDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sSecurity;
				int nPos = dlg.GetScript(sSecurity, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-SECURITY"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("SECURITY"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("SECURITY"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sSecurity);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}
				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加监控!"));
	}
}

//排风机
void CDGJMDlg::OnBnClickedBtaddroom7()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//DRAFAN:房间|外径|长度|吊高|间距|风量|功率|机号|名称|型号|厂家
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CSDFJDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sScript;
				int nPos = dlg.GetScript(sScript, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-DRAFAN"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("DRAFAN"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("DRAFAN"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sScript);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}
				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加风机!"));
	}
}

//排水沟
void CDGJMDlg::OnBnClickedBtaddroom11()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			//排水沟一律在底部
			CJPSGDlg gDlg;
			if (IDOK == gDlg.DoModal())
			{
				CString sWater;
				int nPos = gDlg.GetScript(sWater, nIndex);

				CString sKey;
				sKey.Format(_T("%d-%d-GUTTERWAY"), 0, 0);
				if (gDlg.m_bRemove)
				{
					m_mapAddtion.RemoveKey(sKey);
				}
				else
				{
					m_mapAddtion.SetAt(sKey, sWater);
				}

				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加排水沟!"));
	}
}

//瓦斯报警器
void CDGJMDlg::OnBnClickedButton6()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//GASALARM:房间|位置|高度|长|宽|厚|间距|名称|等级|型号|厂家
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CWSJCDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sScript;
				int nPos = dlg.GetScript(sScript, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-GASALARM"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("GASALARM"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("GASALARM"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sScript);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}

				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加瓦斯报警器!"));
	}
}

//烟雾报警器
void CDGJMDlg::OnBnClickedButton19()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//SMOKALARM:房间|位置|高度|长|宽|厚|间距|名称|等级|型号|厂家
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CYWBJDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sScript;
				int nPos = dlg.GetScript(sScript, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-SMOKALARM"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("SMOKALARM"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("SMOKALARM"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sScript);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}
				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加烟雾报警器!"));
	}
}

//温度报警器
void CDGJMDlg::OnBnClickedButton74()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//TEMPALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|编号|规格|厂家|偏移
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CWDBJDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sScript;
				int nPos = dlg.GetScript(sScript, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-TEMPALARM"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("TEMPALARM"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("TEMPALARM"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sScript);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}

				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加温度湿度报警器!"));
	}
}

//CO探测器
void CDGJMDlg::OnBnClickedButton11()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//COALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|浓度|偏移
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CYYHTDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sScript;
				int nPos = dlg.GetScript(sScript, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-COALARM"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("COALARM"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("COALARM"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sScript);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}

				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加温度湿度报警器!"));
	}
}

//O2探测器
void CDGJMDlg::OnBnClickedButton81()
{
	int nIndex = GetIdxOfRoom();
	if (nIndex != -1)
	{
		//OXALARM:房间|左右侧|位置|间距|宽度|高度|厚度|名称|采样方式|测量精度|厂家|偏移
		CString sKey, sName;
		sKey.Format(_T("%d"), GetIdxOfRoom());
		if ( m_mapIndexToName.Lookup(sKey, sName) )
		{
			//计算可能分舱的四个方向的偏移量
			CString sOffsets = _T("");

			CYQTCDlg dlg;
			if (IDOK == dlg.DoModal())
			{
				CString sScript;
				int nPos = dlg.GetScript(sScript, nIndex,sOffsets);

				CString sKey;
				sKey.Format(_T("%d-%d-%d-OXALARM"), nIndex, nPos, dlg.m_nNo);
				if (dlg.m_bRemove)
				{
					removeAddin(dlg.m_nNo, _T("OXALARM"), m_mapAddtion);
				}
				else
				{
					if (!hasAddin(dlg.m_nNo, _T("OXALARM"), m_mapAddtion))
						m_mapAddtion.SetAt(sKey, sScript);
					else
					{
						CString str(_T(""));
						str.Format(_T("编号：%d已经存在！"), dlg.m_nNo);
						AfxMessageBox(str);
					}
				}
				//刷新
				RedrawDrawRegion();
			}
		}
		else
		{
			AfxMessageBox(_T("请先设置选择的舱室名称!"));
		}
	}
	else
	{
		AfxMessageBox(_T("请选择管廊舱室添加温度湿度报警器!"));
	}
}
	//横断出图
extern BOOL OutDrawing(LPCTSTR pszDrawFileSub, AcDbVoidPtrArray& arEntPtrs, const AcGeVector3d& vtDir, bool bIsShowEntPtrs,bool bAddToModelSpace, bool hasDim = true);
void CDGJMDlg::OnBnClickedButton3()
{
	EnableWindow(FALSE);
	CWnd* pFrame = acedGetAcadFrame();
	pFrame->EnableWindow(TRUE);
	ShowWindow(SW_HIDE);
	pFrame->SetFocus();

	AcDbVoidPtrArray arDrawffer;
	GetDrawBuffer(arDrawffer);

	AcAxDocLock lock;

	/*AcDbObjectId id;
	AcDbEntity* pEnt = NULL;
	for (int i = 0;i < arDrawffer.length();i++)
	{
		pEnt = (AcDbEntity*)arDrawffer.at(i);
		AddToModelSpace(pEnt,id,NULL,true);
	}*/

	bool bAddToModelSpace = false;
	int nRelt = 0;
	int nRes = acedGetInt(_T("\n请选择断面出图空间[布局空间(0)/模型空间(1)]<布局空间>:"),&nRelt);
	if (nRes == RTCAN )
	{
		pFrame->EnableWindow(FALSE);
		EndDialog(IDCANCLE);
		return;
	}

	if (nRelt == 1)
		bAddToModelSpace = true;

	OutDrawing(LAYOUTNAME_HD, arDrawffer, AcGeVector3d::kXAxis, true,bAddToModelSpace);

	pFrame->EnableWindow(FALSE);
	EndDialog(IDCANCLE);
}

int CDGJMDlg::GetDrawBuffer(AcDbVoidPtrArray& arDrawbuffer) const
{
	if (!m_arDrawBuffer.isEmpty())
	{
		AcDbEntity* pEnt = NULL,*pEntClone = NULL;
		for (int i = 0;i < m_arDrawBuffer.length();i++)
		{
			pEnt = (AcDbEntity*)m_arDrawBuffer.at(i);
			if (pEnt != NULL)
			{
				AcDbRegion* pReg = AcDbRegion::cast(pEnt);
				if (pReg != NULL)
				{
					pReg->explode(arDrawbuffer);
				}
				else
				{
					pEntClone = (AcDbEntity*)pEnt->clone();
					arDrawbuffer.append(pEntClone);
				}
			}
		}
	}
	return arDrawbuffer.length();
}