#include "stdafx.h"
#include "AECStatusRecord.h"
#include "AecDbDuctJig.h"
#include "FGBZDlg.h"
#include "AecDbDuctLine.h"
#include "ReducerDlg.h"
#include "ChangElDlg.h"
#include "TJXGDlg.h"
#include "CoreTools.h"
#include "AecDbHvacDuct.h"
#include "KTCADSysVar.h"

#ifndef DXF_PIPE 
#define DXF_PIPE _T("AEC_DBDUCT")
#endif

static double FormatZero(double dVal)
{
	if ( fabs(dVal)  < 1.e-6 )
		return 0.0;

	int nVal = (int)(dVal * 1000.0);
	return nVal / 1000.0;
}

AecDbDuctJig::AecDbDuctJig(void)
{
	m_pPipeLine = new AecDbDuctLine(this);
	m_tStartIntf.vtDir = AcGeVector3d::kIdentity;
	m_tStartIntf.ptPos = AcGePoint3d::kOrigin;
	m_vtStaDir.set(0.0,0.0,0.0);
	InitStatusRecs();
	m_nUndoGoupid = 0;
}

AecDbDuctJig::AecDbDuctJig(AecHvac::DuctParam &param)
{
	m_pPipeLine = new AecDbDuctLine(this);
	m_pPipeLine->SetPipeParam(&param);
	m_tStartIntf.vtDir = AcGeVector3d::kIdentity;
	m_tStartIntf.ptPos = AcGePoint3d::kOrigin;
	m_vtStaDir.set(0.0, 0.0, 0.0);
	InitStatusRecs();
	m_nUndoGoupid = 0;
}

AecDbDuctJig::~AecDbDuctJig(void)
{
}

void AecDbDuctJig::InitStatusRecs()
{
	//1.起端为管子的状态
	AECStatusRecord* pRec1 = NULL;
	pRec1 = new AECStatusRecord;
	m_arStaPtrs.Add(pRec1);
	pRec1->SetPrompt(_T("\n指定起点<退出>:"));
	pRec1->SetStatusType(AECStatusRecord::kPoint);
	pRec1->SetPlanPosition(0);

	AECStatusRecord* pRec2 = NULL;
	pRec2 = new AECStatusRecord;
	m_arStaPtrs.Add(pRec2);	

	pRec2->SetPrompt(_T("\n指定下一点或 [变径(R)/立管(E)/斜管(X)/回退(U)<退出>:"));
	pRec2->SetStatusType(AECStatusRecord::kPoint);
	pRec2->SetKeywordList(_T("R E X U"));

	pRec1->SetNextStatus(pRec2);
	pRec2->SetPlanPosition(1);
	pRec2->SetNextStatus(pRec2,1);
	m_pCurStaRec = pRec1;
}

void AecDbDuctJig::SetAngleWath(AcGePoint3d& ptCen,const AcGePoint3d& ptGeTo,const AcGeVector3d& vtDir)
{
	((AecDbDuctLine *)m_pPipeLine)->SetAngleWath(ptCen,ptGeTo,vtDir);
}

void AecDbDuctJig::CalReferencePoint()
{
	AcGePoint3d ptWcs;
	ads_point ptBase,pt22,pt33;

	acedInitGet(RSG_NONULL,_T("R"));
	int nRes = acedGetPoint(NULL,_T("\n指定起点或[参考点(R)]<退出>:"),ptBase);
	switch(nRes)
	{
	case RTNORM:
		{
			acdbUcs2Wcs(ptBase,pt22,false);
			ptWcs = asPnt3d(pt22);
			ptWcs.z = ((AecDbDuctLine*)m_pPipeLine)->GetEndElevation();
			m_pCurStaRec->SetAcquirePoint(ptWcs);

			//压入本次状态,起点
			m_pCurStaRec->SetAcquirePoint(ptWcs);
			AECStatusRecord * pRec = new AECStatusRecord;
			pRec->CopyFrom(m_pCurStaRec);
			pRec->SetUndoGroupId(0);
			PushBackStatusRec(pRec);
			((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
			m_pCurStaRec = m_pCurStaRec->GetNextStatus(m_pCurStaRec->GetPos());
			m_pCurStaRec->SetAcquirePoint(ptWcs);

			break;
		}
	case RTKWORD:
		{
			TCHAR szKey[2];
			szKey[0] = '0';
			acedGetInput(szKey);

			switch(szKey[0])
			{
			case _T('R'):
			case _T('r'):
				{
					//参考点<退出>:
					nRes = acedGetPoint(NULL,_T("\n参考点<退出>:"),ptBase);
					if (nRes == RTNORM)
					{
						//起点<退出>:
						nRes = acedGetPoint(ptBase,_T("\n指定起点<退出>:"),pt22);
						if (nRes == RTNORM)
						{
							acdbUcs2Wcs(pt22,pt33,false);
							ptWcs = asPnt3d(pt33);
							ptWcs.z = ((AecDbDuctLine*)m_pPipeLine)->GetEndElevation();

							m_pCurStaRec->SetAcquirePoint(ptWcs);

							//压入本次状态,起点
							m_pCurStaRec->SetAcquirePoint(ptWcs);
							AECStatusRecord * pRec = new AECStatusRecord;
							pRec->CopyFrom(m_pCurStaRec);
							pRec->SetUndoGroupId(0);
							PushBackStatusRec(pRec);
							((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
							m_pCurStaRec = m_pCurStaRec->GetNextStatus(m_pCurStaRec->GetPos());
							m_pCurStaRec->SetAcquirePoint(ptWcs);
						}
					}
					break;
				}
			default:
				break;
			}
		}
	default:
		{
			break;
		}
	}
}

BOOL AecDbDuctJig::DoIt(WPipe::EApp app, BOOL bParamDlg/* = TRUE*/,BOOL bCalRefPoint/* = TRUE*/)
{
	CAcModuleResourceOverride myResources;
	if (bParamDlg)
	{
		CFGBZDlg drawCnfgDLg;
		drawCnfgDLg.EnableLoadLast(TRUE);
		int nRes = drawCnfgDLg.DoModal();
		if (nRes != IDOK)
		{
			return FALSE;
		}

		AecHvac::DuctParam param;
		memset(&param,0,sizeof(AecHvac::DuctParam));
		param.m_app = app;
		drawCnfgDLg.GetPipeParam(&param);
		((AecDbDuctLine*)m_pPipeLine)->SetPipeParam(&param);
	}

	//参考
	if (bCalRefPoint)
	{
		CalReferencePoint();
	}

	AcEdJig::DragStatus eStat;
	int nPlanPos = 0;

	while(TRUE)
	{
		CString sPrompt = m_pCurStaRec->Prompt();
		SetDispPromptWithEleTip(sPrompt);
		setDispPrompt(sPrompt);

		if (((AecDbDuctLine*)m_pPipeLine)->PipeFinished())
		{
			break;
		}

		eStat = drag();

		nPlanPos = m_pCurStaRec->GetPlanPosition();

		switch(eStat)
		{
		case AcEdJig::kNormal:
			{
				if (nPlanPos == 1)    //Create Pipe
				{
					//设置回退记录
					SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("BE"),RTNONE);
					SetUndoGroupBegin();
					if ( ((AecDbDuctLine *)m_pPipeLine)->AddPipeNode(m_pCurStaRec,WPipe::eToCreate) )
					{			
						AECStatusRecord* pRec = new AECStatusRecord;
						pRec->CopyFrom(m_pCurStaRec);
						PushBackStatusRec(pRec);

						((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();

						if (m_pCurStaRec->IsCommand2Stop())
						{
							return TRUE;
						}
					}
					else
					{
						((AecDbDuctLine *)m_pPipeLine)->PipeFinished();
						return FALSE;
					}
					m_vtStaDir.set(0,0,0);//reset
					SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("E"),RTNONE);
					SetUndoGroupEnd();
				}
				break;
			}
		case AcEdJig::kCancel:
		case AcEdJig::kNull:// 退出
			{
				acutPrintf(_T("\n"));
				return FALSE;
			}
		case AcEdJig::kKW1://R 变径
			{
				//至少创建了一个管段
				if (((AecDbDuctLine*)m_pPipeLine)->GetLastInterface() == NULL)
				{
					acutPrintf(_T("\n之前没有创建管段,无法变径!"));
					continue;
				}

				AcGeVector3d vtDir;
				AecInterface* pIntf = ((AecDbDuctLine*)m_pPipeLine)->GetLastInterface();
				if (pIntf == NULL)
					vtDir = AcGeVector3d::kXAxis;
				else
					vtDir = pIntf->vtDir;

				CReducerDlg redDLg;
				AecHvac::DuctParam param;
				memset(&param,0,sizeof(AecHvac::DuctParam));
				memcpy(&param,((AecDbDuctLine*)m_pPipeLine)->GetPipeParam(),sizeof(AecHvac::DuctParam));
				param.dSize[3] = param.dSize[0];

				redDLg.SetCurWidth(param.dSize[0],param.m_dRatio * param.dSize[0]);
				redDLg.SetCurHeight(param.dSize[1]);

				int nRes = redDLg.DoModal();
				if (nRes == IDOK)
				{
					AcGePoint3d ptSize;
					CPoint ptEc = redDLg.GetReducer(ptSize,param.dSize[4]);
					param.dSize[3] = ptSize.y;//End
					param.m_dL = ptSize.z;
					param.m_nEcCen = ptEc.x;
					param.m_nZEcCen = ptEc.y;

					//设置回退记录
					SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("BE"),RTNONE);
					SetUndoGroupBegin();

					if ( ( (AecDbDuctLine *)m_pPipeLine)->AddReducer(m_pCurStaRec,&param) )
					{
						AECStatusRecord* pRec = new AECStatusRecord;
						pRec->CopyFrom(m_pCurStaRec);
						PushBackStatusRec(pRec);

						((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();

						//后续管子继承变径
						AecHvac::DuctParam* pCurParm = ((AecDbDuctLine*)m_pPipeLine)->GetPipeParam();
						pCurParm->dSize[0] = param.dSize[3];//开始宽度
						pCurParm->dSize[1] = param.dSize[4];//高度
					}

					SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("E"),RTNONE);
					SetUndoGroupEnd();
				}
				break;
			}
		case AcEdJig::kKW2://E 标高
			{
				CChangElDlg chelDlg;
				double dEl = ((AecDbDuctLine*)m_pPipeLine)->GetPipeParam()->m_dEl;
				double dH = m_pPipeLine->GetPipeParam()->dSize[1];

				//上来就绘制立管,至少创建了一个管段
				if (((AecDbDuctLine*)m_pPipeLine)->GetLastInterface() == NULL)
				{
					//可以改为仅仅改标高对话框,当没有状态记录时
					//acutPrintf(_T("\n之前没有创建管段,无法变标高!"));

					//当前位置选择到实体的话,更新标高
					AECStatusRecord* pRec = GetTailStatusRec();
					dEl = PickWPipehereEl(pRec->GetAcquirePoint());
					((AecDbDuctLine*)m_pPipeLine)->GetPipeParam()->m_dEl = dEl;

					//弹出标高对话框,创建立管,如果选择位置有三通，则三通连接
					chelDlg.m_dCurEl = dEl + 0.5 * dH;
					int nRes = chelDlg.DoModal();
					if (nRes == IDOK)
					{
						//设置回退记录
						SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("BE"),RTNONE);
						SetUndoGroupBegin();

						//原位置 的改标高
						m_pCurStaRec->SetAcquirePoint(pRec->GetAcquirePoint());
						if ( ( (AecDbDuctLine *)m_pPipeLine)->ChangeEl2(m_pCurStaRec,pRec,chelDlg.m_dNewEl - 0.5 * dH,
							FALSE,0.0,NULL ) )
						{
							AECStatusRecord* pRec = new AECStatusRecord;
							pRec->CopyFrom(m_pCurStaRec);

							PushBackStatusRec(pRec);
							((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
						}

						SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("E"),RTNONE);
						SetUndoGroupEnd();
					}
					continue;
				}

				//标高的变化
				chelDlg.m_dCurEl = dEl + 0.5 * dH;
				int nRes = chelDlg.DoModal();
				if (nRes == IDOK)
				{
					//设置回退记录
					SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("BE"),RTNONE);
					SetUndoGroupBegin();

					if ( ( (AecDbDuctLine *)m_pPipeLine)->ChangeEl(m_pCurStaRec,chelDlg.m_dNewEl - 0.5 * dH,FALSE,0.0,NULL ) )
					{
						AECStatusRecord* pRec = new AECStatusRecord;
						pRec->CopyFrom(m_pCurStaRec);
						PushBackStatusRec(pRec);
						((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
					}

					SHacedCommand(RTSTR,_T("_undo"),RTSTR,_T("E"),RTNONE);
					SetUndoGroupEnd();
				}
				break;
			}
		case AcEdJig::kKW3://U 回退
			{
				//至少创建了一个管段
				AECStatusRecord* pLast = GetTailStatusRec();
				if ( pLast == NULL)
				{
					acutPrintf(_T("\n之前没有拾取位置点!请先拾取第一点!"));
					continue;
				}

				//添加斜管
				CTJXGDlg dlg;
				dlg.m_dLastEl = ((AecDbDuctLine*)m_pPipeLine)->GetPipeParam()->m_dEl;

				int nRes = dlg.DoModal();
				if (nRes == IDOK)
				{
					if ( fabs(dlg.m_dNewEl - dlg.m_dLastEl) < 1.e-6 )//同标高
					{
						continue;
					}

					//设置回退记录
					SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("BE"), RTNONE);
					SetUndoGroupBegin();

					AcGePoint3d ptLast = pLast->GetAcquirePoint();

					//选择下一点
					ads_point pt,pt2,pt3;
					acdbWcs2Ucs(asDblArray(ptLast),pt,false);
					nRes = acedGetPoint(pt,_T("\n指定下一点:"),pt2);
					if (nRes == RTNORM)
					{
						AcGePoint3d ptThis;
						acdbUcs2Wcs(pt2,pt3,false);
						ptThis = asPnt3d(pt3);
						ptThis.z = dlg.m_dNewEl;

						if (((AecDbDuctLine *)m_pPipeLine)->ChangeEl3(m_pCurStaRec,ptThis))
						{
							AECStatusRecord* pRec = new AECStatusRecord;
							pRec->CopyFrom(m_pCurStaRec);
							PushBackStatusRec(pRec);
							((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
						}
					}
					SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("E"), RTNONE);
					SetUndoGroupEnd();
				}
				break;
			}
		case AcEdJig::kKW4://U 回退
			{
				if (m_lstStaPtrsBack.GetCount() > 1)
				{
					SHacedCommand(RTSTR,_T("u"),RTNONE);
					PopUpStatusRec();
				}
				else
				{
					continue;
				}
				break;
			}
		default:
			break;
		}

		//获取下个状态,plane判断是？
		if (m_pCurStaRec->GetPlanPosition() == 0 )
		{
			AECStatusRecord * pRec = new AECStatusRecord;
			pRec->CopyFrom(m_pCurStaRec);
			pRec->SetUndoGroupId(0);
			PushBackStatusRec(pRec);
			((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
			m_pCurStaRec = m_pCurStaRec->GetNextStatus(m_pCurStaRec->GetPos());
		}
	}
	acutPrintf(_T("\n"));
	return TRUE;
}

BOOL AecDbDuctJig::DoIt(AecInterface* pIntf,AecHvac::DuctParam* pParam)
{
	if (pIntf == NULL) return FALSE;

	if (pParam == NULL) //用户确定壁厚和外径 etc.
	{
		CAcModuleResourceOverride myResources;
		CFGBZDlg drawCnfgDLg;

		double dSize(pIntf->dSize1),dSize1(pIntf->dSize2);

		drawCnfgDLg.SetEleReadOnly(TRUE,FormatZero(pIntf->ptPos.z));//圆整
		int nRes = drawCnfgDLg.DoModal();
		if (nRes == IDOK)
		{
			AecHvac::DuctParam param;
			memset(&param,0,sizeof(AecHvac::DuctParam));

			drawCnfgDLg.GetPipeParam(&param);
			param.m_dEl = pIntf->ptPos.z;//标高确定不变
			((AecDbDuctLine*)m_pPipeLine)->SetPipeParam(&param);
		}
		else
		{
			return FALSE;
		}
	}
	else
	{
		//
		((AecDbDuctLine*)m_pPipeLine)->SetPipeParam(pParam);
	}

	//压入本次接口
	if ( /*pParam != NULL &&*/ pIntf->idOwner.isValid())
	{
		((AecDbDuctLine*)m_pPipeLine)->PushInterface(*pIntf,TRUE);
	}

	//压入本次状态,起点
	m_pCurStaRec->SetAcquirePoint(pIntf->ptPos);
	AECStatusRecord * pRec = new AECStatusRecord;
	pRec->CopyFrom(m_pCurStaRec);
	pRec->SetUndoGroupId(0);
	PushBackStatusRec(pRec);

	((AecDbDuctLine *)m_pPipeLine)->SetAngleWath(pIntf->ptPos,pRec->GetAcquirePoint(),pIntf->vtDir);
	m_pCurStaRec = m_pCurStaRec->GetNextStatus(m_pCurStaRec->GetPos());

	return DoIt(WPipe::eBridge, FALSE,FALSE);
}

BOOL AecDbDuctJig::DoItOnPath(WPipe::EApp app, const AcGePoint3dArray &arPts, bool bHasFit,bool bShowParamDlg)
{
	if (bShowParamDlg)
	{
		CAcModuleResourceOverride myResources;
		CFGBZDlg drawCnfgDLg;
		drawCnfgDLg.EnableLoadLast(TRUE);
		int nRes = drawCnfgDLg.DoModal();
		if (nRes != IDOK)
		{
			return FALSE;
		}

		AecHvac::DuctParam param;
		memset(&param, 0, sizeof(AecHvac::DuctParam));
		param.m_app = app;
		drawCnfgDLg.GetPipeParam(&param);
		((AecDbDuctLine *)m_pPipeLine)->SetPipeParam(&param);
	}
	else
	{
		//必须构造函数设置!!!!!
		AecHvac::DuctParam *pParm = ((AecDbDuctLine *)m_pPipeLine)->GetPipeParam();
		if (pParm == NULL)
		{
			CAcModuleResourceOverride myResources;
			CFGBZDlg drawCnfgDLg;
			drawCnfgDLg.EnableLoadLast(TRUE);
			int nRes = drawCnfgDLg.DoModal();
			if (nRes != IDOK)
			{
				return FALSE;
			}

			AecHvac::DuctParam param;
			memset(&param, 0, sizeof(AecHvac::DuctParam));
			param.m_app = app;
			drawCnfgDLg.GetPipeParam(&param);
			((AecDbDuctLine *)m_pPipeLine)->SetPipeParam(&param);
		}
	}
	

	//关闭提示
	KTCADSysVar<int> var1(_T("CMDECHO"), 0);

	AcGePoint3d ptGe;
	for (int i = 0; i < arPts.length(); i++)
	{
		ptGe = arPts.at(i);
		ptGe.z = ((AecDbDuctLine *)m_pPipeLine)->GetEndElevation();

		m_pCurStaRec->SetAcquirePoint(ptGe);

		AfterDrag();

		EndDragRecord();
	}
}

void AecDbDuctJig::EndDragRecord()
{
	//获取下个状态,plane判断是？
	if (m_pCurStaRec->GetPlanPosition() == 0)
	{
		AECStatusRecord *pRec = new AECStatusRecord;
		pRec->CopyFrom(m_pCurStaRec);
		pRec->SetUndoGroupId(0);
		PushBackStatusRec(pRec);
		((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
		m_pCurStaRec = m_pCurStaRec->GetNextStatus(m_pCurStaRec->GetPos());
	}
}

int AecDbDuctJig::AfterDrag()
{
	int nPlanPos = m_pCurStaRec->GetPlanPosition();
	if (nPlanPos != 1)
		return -1;

	//设置回退记录
	SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("BE"), RTNONE);
	SetUndoGroupBegin();
	if (((AecDbDuctLine *)m_pPipeLine)->AddPipeNode(m_pCurStaRec, WPipe::eToCreate))
	{
		AECStatusRecord *pRec = new AECStatusRecord;
		pRec->CopyFrom(m_pCurStaRec);
		PushBackStatusRec(pRec);

		((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();

		if (m_pCurStaRec->IsCommand2Stop())
		{
			return TRUE;
		}
	}
	else
	{
		((AecDbDuctLine *)m_pPipeLine)->PipeFinished();
		return FALSE;
	}
	m_vtStaDir.set(0, 0, 0);//reset
	SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("E"), RTNONE);
	SetUndoGroupEnd();

	return -1;
}

AcEdJig::DragStatus AecDbDuctJig::sampler()
{
	setUserInputControls( ( UserInputControls)
		( AcEdJig::kAccept3dCoordinates |
		AcEdJig::kNullResponseAccepted ) );

	CString sKeywordsList;
	sKeywordsList = m_pCurStaRec->KeywordList();
	if (!sKeywordsList.IsEmpty())
	{
		setKeywordList(sKeywordsList);
	}

	AcEdJig::DragStatus eStat;
	AcGePoint3d ptGe,ptGeBase,ptGe2;
	ptGeBase = AcGePoint3d::kOrigin;

	AECStatusRecord::EAcquire eAcquire = m_pCurStaRec->GetStatusType();
	switch(eAcquire)
	{
	case AECStatusRecord::kPoint:
		{
			m_pPipeLine->SwitchAutoSnapOrF8();

			//开始状态
			int nPos = m_pCurStaRec->GetPlanPosition();
			if (nPos == 0)
			{
				eStat = acquirePoint(ptGe);

				//动态获取的点的标高始终和上次一致
				ptGe.z = ((AecDbDuctLine*)m_pPipeLine)->GetEndElevation();
			}
			else
			{
				//管线的末端点
				GetLastStatusAquire(ptGeBase);
				eStat = acquirePoint(ptGe,ptGeBase);
				ptGe.z = ((AecDbDuctLine*)m_pPipeLine)->GetEndElevation();

				double dDist = ptGeBase.distanceTo(ptGe);
				if (!m_vtStaDir.isZeroLength())
				{
					m_vtStaDir.normalize();
					ptGe = ptGeBase + dDist * m_vtStaDir;
				}
			}

			if (eStat == AcEdJig::kNormal)
			{
				if (m_pCurStaRec->IsValSeted())
				{
					ptGe2 = m_pCurStaRec->GetAcquirePoint();
					double dDis = ptGe2.distanceTo(ptGe);
					if (dDis < 1.e-6)
					{
						//鼠标原地不动
						return AcEdJig::kNoChange;
					}
				}

				ptGe2 = m_pCurStaRec->GetAcquirePoint();
				m_pCurStaRec->SetAcquirePoint(ptGe);
				((AecDbDuctLine *)m_pPipeLine)->AngWatchTo(ptGe);

				if (m_pCurStaRec->GetPlanPosition() > 0 && m_lstStaPtrsBack.GetCount() > 0)
				{
					((AecDbDuctLine *)m_pPipeLine)->AddPipeNode(m_pCurStaRec,WPipe::eToPreView);
					//if (AecAngleWatch::m_bFallInSnap )
					//{
					ptGe = m_pCurStaRec->GetAcquirePoint();
					if (ptGe.distanceTo(ptGe2) < 1.e-6)
					{
						return AcEdJig::kNoChange;
					}
					//}
					return AcEdJig::kNormal;
				}	
			}
			break;
		}
	default:
		break;
	}
	return eStat;
}

AcDbEntity* AecDbDuctJig::entity() const
{
	return m_pPipeLine;
}

Adesk::Boolean AecDbDuctJig::update()
{
	return Adesk::kTrue;
}

BOOL AecDbDuctJig::GetLastStatusAquire(AcGePoint3d& ptGe)
{
	int nSize = m_lstStaPtrsBack.GetCount();
	if (nSize > 0)
	{
		AECStatusRecord* pRec = (AECStatusRecord*)m_lstStaPtrsBack.GetTail();
		if (pRec != NULL)
			ptGe = pRec->GetAcquirePoint();
		return TRUE;
	}
	return FALSE;
}

AECStatusRecord* AecDbDuctJig::GetTailStatusRec()
{
	int nSize = m_lstStaPtrsBack.GetCount();
	if (nSize > 0)
	{
		return (AECStatusRecord*)m_lstStaPtrsBack.GetTail();
	}
	return NULL;
}

void AecDbDuctJig::PushBackStatusRec(AECStatusRecord* pRec)
{
	pRec->SetUndoGroupId(m_nUndoGoupid);
	m_lstStaPtrsBack.AddTail(pRec);
}

void AecDbDuctJig::SetUndoGroupBegin()
{
	m_nUndoGoupid += 1;
}

void AecDbDuctJig::SetUndoGroupEnd()
{
	((AecDbDuctLine *)m_pPipeLine)->PushPipeParam();
}

int AecDbDuctJig::GetUndoGroupID()
{
	return m_nUndoGoupid;
}

void AecDbDuctJig::PopUpStatusRec()
{
	//按 id 回退一次,调整当前状态
	if (m_lstStaPtrsBack.GetCount() > 0)
	{
		AECStatusRecord* pLast = (AECStatusRecord*)m_lstStaPtrsBack.GetTail();
		int nID = pLast->GetUndoGroupId();
		while(m_lstStaPtrsBack.GetCount() > 0)
		{
			m_lstStaPtrsBack.RemoveTail();

			DELETE_PTR(pLast);
			pLast = NULL;
			if (m_lstStaPtrsBack.GetCount() == 0)
			{
				break;
			}

			pLast = (AECStatusRecord*)m_lstStaPtrsBack.GetTail();
			if (nID != pLast->GetUndoGroupId())
			{
				break;
			}
		}

		//pipeline 回退一次,调整接口记录
		((AecDbDuctLine *)m_pPipeLine)->PopUpInterface(nID);
		((AecDbDuctLine *)m_pPipeLine)->MoveAngWatchPosition();
	}
}

void AecDbDuctJig::SetDispPromptWithEleTip(CString& sPrompt)
{
	CString sEl;
	if (m_pCurStaRec != NULL)
	{
		sEl.Format(_T("(当前标高:%g)"),m_pCurStaRec->GetAcquirePoint().z);

		int nIndex = sPrompt.ReverseFind(_T(':'));
		if (nIndex != -1)
		{
			sPrompt.Insert(nIndex,sEl);
		}
	}
}

double AecDbDuctJig::PickWPipehereEl(const AcGePoint3d& ptGe)
{
	double dEl = ptGe.z;

	ads_point pt[5];
	double dSize = CoreTools::PixelToWcs(5);//5

	AcGePoint3d ptGeX[5];
	ptGeX[0] = ptGe;
	ptGeX[0] -= dSize * AcGeVector3d::kYAxis;
	ptGeX[0] -= dSize * AcGeVector3d::kXAxis;

	ptGeX[1] = ptGeX[0] + 2 * dSize * AcGeVector3d::kYAxis;
	ptGeX[2] = ptGeX[1] + 2 * dSize * AcGeVector3d::kXAxis;
	ptGeX[3] = ptGeX[0] + 2 * dSize * AcGeVector3d::kXAxis;
	ptGeX[4] = ptGeX[0];

	for (int i = 0;i < 5;i++)
	{
		acdbWcs2Ucs(asDblArray(ptGeX[i]),pt[i],false);
	}

	TCHAR szBuf[64];
	memset(szBuf,0,sizeof(szBuf));
	_tcscpy(szBuf, DXF_PIPE);

	struct resbuf rb;
	rb.restype = 0;
	rb.resval.rstring = szBuf;
	rb.rbnext = NULL; 

	struct resbuf* pointlist; 
	pointlist = acutBuildList(RTPOINT, pt[0], RTPOINT, pt[1], 
		RTPOINT, pt[2], RTPOINT, pt[3], 0); 

	ads_name ss,ent;
	acedSSGet(_T("CP"),pointlist,NULL,&rb,ss);
	acutRelRb(pointlist);

	Adesk::Int32 lLen = 0;
	acedSSLength(ss,&lLen);

	AcDbObjectId id;
	AcGePoint3d ptOn;
	if (lLen > 0)
	{
		acedSSName(ss,0,ent);
		acdbGetObjectId(id,ent);

		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead) )
		{
			AecDbHvacDuct* pWPipe = AecDbHvacDuct::cast(pEnt);
			if (pWPipe != NULL)
			{
				dEl = pWPipe->EndPoint().z;
			}
			pEnt->close();
		}
	}
	acedSSFree(ss);	
	return dEl;
}