#include "stdafx.h" #include "TDbColumn.h" //////////////////////////////////////////////////////////////////////////// // ver: 0-TArch8 const Adesk::UInt8 TDbParallelStair::g_nVersion = 0; ACRX_DXF_DEFINE_MEMBERS(ATSParallelStair, ATSPolyPathEnt, AcDb::kDHL_CURRENT, AcDb::kMReleaseCurrent, 1, ATS_PARALLELSTAIR, "ATS_PARALLELSTAIR图形无法解析, 请下载上华软件|网址: www.shanghuasoft.com"); IMPLEMENT_TENTBASE(TDbParallelStair); TDbParallelStair::TDbParallelStair() { m_nStepHeight=_AS_SYS_UNIT(220.0); //踏步高 m_nStepWidth=_AS_SYS_UNIT(300); //踏步宽 m_nStairWidth=_AS_SYS_UNIT(1200); //边梯段宽 m_nMStairWidth=_AS_SYS_UNIT(1200); //中梯段宽 m_nSlabSize=_AS_SYS_UNIT(1200); //休息平台尺寸 m_nSlabSizeSide=_AS_SYS_UNIT(1200); //休息平台边段尺寸 m_nSlabSizeMid=_AS_SYS_UNIT(1200); //休息平台中段尺寸 m_nRotation=0.0; //旋转角度 m_nStepNum1=m_nStepNum2=0; //一跑和二跑步数 m_nSpaceWidth=_AS_SYS_UNIT(3600.0); //楼梯间尺寸 m_nRailHeight=_AS_SYS_UNIT(900); m_nStairFlag=1; //楼层标记 m_nStartSide=OFFSET_MID; //中梯起步 m_nAlignment=0; //踏步取齐: 0--齐休息平台, 1--齐中间, 2--齐楼板 m_nRailWidth=_AS_SYS_UNIT(60.0); //扶手宽度 m_nRailDistMid=m_nStepWidth*0.5; //层间转角处扶手伸出距离 m_nRailDist=m_nStepWidth*0.5; //层与层连接处扶手伸出距离 m_dSectRotation=PI/6.0; //剖断线旋转角度 m_nFlagEx=0; m_nBeamHeight=_AS_SYS_UNIT(200); //边梁高，坡道专用 m_nBeamThick=_AS_SYS_UNIT(120); //边梁厚度 m_nSlabThick=_AS_SYS_UNIT(120); //板厚或梁厚 m_nViewCtrl=0; //自动确定 m_nFlagEx |= SFEX_SECTPOS; m_dTextHeight=3.5; } TDbParallelStair::~TDbParallelStair() { } BOOL TDbParallelStair::IsValid() const { BOOL bRet=TDbEntity::IsValid(); if(!bRet) return bRet; bRet=(m_nStepHeight>_DIST_SNAP && //踏步高 m_nStepWidth>_DIST_SNAP && //踏步宽 m_nStairWidth>_DIST_SNAP && //边梯段宽 m_nMStairWidth>_DIST_SNAP && //中梯段宽 m_dTextHeight>0&& //字高 m_nStepNum1>1 && //边梯步数 m_nStepNum2>1 && //中梯步数 m_nSpaceWidth-2*m_nStairWidth-m_nMStairWidth>-_DIST_SNAP && //楼梯间尺寸 m_nRailHeight>_DIST_SNAP && //扶手高 m_nRailWidth>_DIST_SNAP && //扶手宽 GreatEqual(m_nRailDistToSide,-(m_nSpaceWidth-m_nStairWidth*2-m_nMStairWidth)/4.0) && //扶手距边 GreatEqual(m_nBeamHeight, 0.0) &&//边梁高 GreatEqual(m_nBeamThick, 0.0) &&//边梁厚 GreatEqual(m_nSlabThick, 0.0) &&//休息台厚 m_nStairWidth>m_nRailWidth+m_nRailDistToSide); //扶手高度 return bRet; } // 提供对格式刷的支持 void TDbParallelStair::CopyPropertiesFrom(AcDbEntity *pSrcEntity, unsigned gMatchFlag) { assertWriteEnabled(); TDbPolyPathEnt::CopyPropertiesFrom(pSrcEntity, gMatchFlag); TDbParallelStair *pSrc=TDbParallelStair::cast(pSrcEntity); if(pSrc) { m_nStepHeight=pSrc->m_nStepHeight; m_nStepWidth=pSrc->m_nStepWidth; m_nStairWidth=pSrc->m_nStairWidth; m_nMStairWidth=pSrc->m_nMStairWidth; m_nSlabSize=pSrc->m_nSlabSize; m_nSlabSizeSide=pSrc->m_nSlabSizeSide; m_nSlabSizeMid=pSrc->m_nSlabSizeMid; m_nStepNum1=pSrc->m_nStepNum1; m_nStepNum2=pSrc->m_nStepNum2; m_dTextHeight=pSrc->m_dTextHeight; m_nSpaceWidth=pSrc->m_nSpaceWidth; m_nRailHeight=pSrc->m_nRailHeight; m_nRailWidth=pSrc->m_nRailWidth; m_nRailDistToSide=pSrc->m_nRailDistToSide; m_nStairFlag=pSrc->m_nStairFlag; m_nAlignment=pSrc->m_nAlignment; m_nRailDistMid=pSrc->m_nRailDistMid; m_nRailDist=pSrc->m_nRailDist; m_dSectRotation=pSrc->m_dSectRotation; m_nSectStepNum=pSrc->m_nSectStepNum; m_nStartSide=pSrc->m_nStartSide; m_nFlagEx=pSrc->m_nFlagEx; m_nBeamHeight=pSrc->m_nBeamHeight; //边梁高，坡道专用 m_nBeamThick=pSrc->m_nBeamThick; //边梁厚度 m_nSlabThick=pSrc->m_nSlabThick; //板厚或梁厚 //add by xlc on 090426箭头文字 SetTextUp(pSrc->GetTextUp()); SetTextDown(pSrc->GetTextDown()); if(database()==NULL|| pSrcEntity->database()==NULL|| database()==pSrcEntity->database()) { m_idLayerHand3d=pSrc->m_idLayerHand3d; m_idLayerStep3d=pSrc->m_idLayerStep3d; m_idLayerBeam3d=pSrc->m_idLayerBeam3d; m_idLayerRail3d=pSrc->m_idLayerRail3d; m_idLayerArrow=pSrc->m_idLayerArrow; m_idLayerText=pSrc->m_idLayerText; m_idTextStyle=pSrc->m_idTextStyle; } m_nViewCtrl=pSrc->m_nViewCtrl; } } Acad::ErrorStatus TDbParallelStair::subGetClassID(CLSID* pClsid) const { return Acad::eOk; } // 从DWG读入数据: Acad::ErrorStatus TDbParallelStair::dwgInFields (AcDbDwgFiler* pFiler) { assertWriteEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dwgInFields(pFiler); if(es != Acad::eOk) return es; Adesk::UInt8 nVer; pFiler->readItem(&nVer); if(nVer>g_nVersion) {// Version is too new return Acad::eMakeMeProxy; } pFiler->readItem((AcGePoint3d *)&m_ptLocation); pFiler->readItem(&m_nRotation); //旋转角度 pFiler->readItem(&m_nStepHeight); //踏步高 pFiler->readItem(&m_nStepWidth); //踏步宽 pFiler->readItem(&m_nStairWidth); //边梯段宽 pFiler->readItem(&m_nMStairWidth); //中梯段宽 pFiler->readItem(&m_nSlabSize); //休息平台尺寸 pFiler->readItem(&m_nSlabSizeSide); //休息平台边段尺寸 pFiler->readItem(&m_nSlabSizeMid); //休息平台中段尺寸 pFiler->readItem(&m_nStepNum1); //边梯步数 pFiler->readItem(&m_nStepNum2); //中梯步数 pFiler->readItem(&m_nSpaceWidth); //楼梯间尺寸 pFiler->readItem(&m_nRailHeight); //扶手高 pFiler->readItem(&m_nStairFlag); //楼层标记 pFiler->readItem(&m_nStartSide); //起步的一侧 pFiler->readItem(&m_nAlignment); //踏步取齐: 0--齐休息平台, 1--齐中间, 2--齐楼板 pFiler->readItem(&m_nRailWidth); //扶手宽 pFiler->readItem(&m_nRailDistToSide); //扶手距离边 pFiler->readItem(&m_nRailDistMid); //层间转角处扶手伸出距离 pFiler->readItem(&m_nRailDist); //层与层连接处扶手伸出距离 pFiler->readItem(&m_nSectStepNum); //剖断步数 pFiler->readItem(&m_dSectRotation); //剖断转角 pFiler->readItem(&m_dTextHeight); //字高 pFiler->readItem(&m_nFlagEx); pFiler->readItem(&m_nBeamHeight); pFiler->readItem(&m_nBeamThick); pFiler->readItem(&m_nSlabThick); pFiler->readItem(&m_idLayerHand3d); pFiler->readItem(&m_idLayerStep3d); pFiler->readItem(&m_idLayerBeam3d); pFiler->readItem(&m_idLayerRail3d); pFiler->readItem(&m_idLayerText); pFiler->readItem(&m_idTextStyle); pFiler->readItem(&m_idLayerArrow); pFiler->readItem(&m_nViewCtrl); return pFiler->filerStatus(); } Acad::ErrorStatus TDbParallelStair::dwgOutFields(AcDbDwgFiler* pFiler) const { assertReadEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dwgOutFields(pFiler); if(es != Acad::eOk) return es; pFiler->writeItem(g_nVersion); pFiler->writeItem((AcGePoint3d &)m_ptLocation); pFiler->writeItem(m_nRotation); //旋转角度 pFiler->writeItem(m_nStepHeight); //踏步高 pFiler->writeItem(m_nStepWidth); //踏步宽 pFiler->writeItem(m_nStairWidth); //边梯段宽 pFiler->writeItem(m_nMStairWidth); //中梯段宽 pFiler->writeItem(m_nSlabSize); //休息平台尺寸 pFiler->writeItem(m_nSlabSizeSide); //休息平台边段尺寸 pFiler->writeItem(m_nSlabSizeMid); //休息平台中段尺寸 pFiler->writeItem(m_nStepNum1); //边梯步数 pFiler->writeItem(m_nStepNum2); //中梯步数 pFiler->writeItem(m_nSpaceWidth); //楼梯间宽度 pFiler->writeItem(m_nRailHeight); //扶手高度 pFiler->writeItem(m_nStairFlag); //楼层标记 pFiler->writeItem(m_nStartSide); //起步的一侧 pFiler->writeItem(m_nAlignment); //踏步取齐: 0--齐休息平台, 1--齐中间, 2--齐楼板 pFiler->writeItem(m_nRailWidth); //扶手宽 pFiler->writeItem(m_nRailDistToSide); //扶手距离边 //TArch8 pFiler->writeItem(m_nRailDistMid); //层间转角处扶手伸出距离 pFiler->writeItem(m_nRailDist); //层与层连接处扶手伸出距离 pFiler->writeItem(m_nSectStepNum); //剖断步数 pFiler->writeItem(m_dSectRotation); //剖断转角 pFiler->writeItem(m_dTextHeight); //字高 pFiler->writeItem(m_nFlagEx); pFiler->writeItem(m_nBeamHeight); pFiler->writeItem(m_nBeamThick); pFiler->writeItem(m_nSlabThick); pFiler->writeItem(m_idLayerHand3d); pFiler->writeItem(m_idLayerStep3d); pFiler->writeItem(m_idLayerBeam3d); pFiler->writeItem(m_idLayerRail3d); pFiler->writeItem(m_idLayerText); pFiler->writeItem(m_idTextStyle); pFiler->writeItem(m_idLayerArrow); pFiler->writeItem(m_nViewCtrl); return pFiler->filerStatus(); } Acad::ErrorStatus TDbParallelStair::dxfInFields (AcDbDxfFiler* pFiler) { assertWriteEnabled(); Acad::ErrorStatus es = TDbPolyPathEnt::dxfInFields(pFiler); if(es!=Acad::eOk) return es; if (!pFiler->atSubclassData(_T("TDbParallelStair"))) { return Acad::eBadDxfSequence; } Adesk::Int32 fieldsFlags=0; resbuf rb; double r1, r2, r3, r4, r5, r6, r7, r8, r9,r10; int i1, i2, i3, i4, i5; XPoint pt; while ((es == Acad::eOk) && ((es = pFiler->readResBuf(&rb)) == Acad::eOk)) { switch (rb.restype) { case AcDb::kDxfXCoord: pt=rb.resval.rpoint; fieldsFlags |= 0x01; break; case AcDb::kDxfReal: r1=rb.resval.rreal; fieldsFlags |= 0x02; break; case AcDb::kDxfReal+1: r2=rb.resval.rreal; fieldsFlags |= 0x04; break; case AcDb::kDxfReal+2: r3=rb.resval.rreal; fieldsFlags |= 0x08; break; case AcDb::kDxfReal+3: r4=rb.resval.rreal; fieldsFlags |= 0x10; break; case AcDb::kDxfReal+4: r5=rb.resval.rreal; fieldsFlags |= 0x20; break; case AcDb::kDxfReal+5: r6=rb.resval.rreal; fieldsFlags |= 0x40; break; case AcDb::kDxfReal+6: r7=rb.resval.rreal; fieldsFlags |= 0x80; break; case AcDb::kDxfReal+7: r8=rb.resval.rreal; fieldsFlags |= 0x100; break; case AcDb::kDxfReal+8: r10=rb.resval.rreal; fieldsFlags |= 0x10000; break; case AcDb::kDxfReal+9: m_nRailDistMid=rb.resval.rreal; break; case AcDb::kDxfReal+11: m_nRailDist=rb.resval.rreal; break; case AcDb::kDxfReal+12: m_dTextHeight=rb.resval.rreal; break; case AcDb::kDxfReal+13: m_dSectRotation=rb.resval.rreal; break; case AcDb::kDxfReal+14: m_nSlabSizeMid=rb.resval.rreal; break; case AcDb::kDxfAngle: r9 = rb.resval.rreal; fieldsFlags |= 0x200; break; case AcDb::kDxfInt16: i1=rb.resval.rint; fieldsFlags |= 0x400; break; case AcDb::kDxfInt16+1: i2=rb.resval.rint; fieldsFlags |= 0x800; break; case AcDb::kDxfInt16+2: i3=rb.resval.rint; fieldsFlags |= 0x1000; break; case AcDb::kDxfInt16+3: i4=rb.resval.rint; fieldsFlags |= 0x400; break; case AcDb::kDxfInt16+4: i5=rb.resval.rint; fieldsFlags |= 0x400; break; case 75: m_nViewCtrl=(Adesk::UInt8)rb.resval.rint; break; case 76: m_nSectStepNum=(int)rb.resval.rint; break; case 90: m_nFlagEx=rb.resval.rlong; break; case 145: m_nBeamHeight=rb.resval.rreal; break; case 146: m_nBeamThick=rb.resval.rreal; break; case 147: m_nSlabThick=rb.resval.rreal; break; case 412: m_idLayerStep3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 413: m_idLayerBeam3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 414: m_idLayerHand3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 415: m_idLayerRail3d=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 416: m_idLayerText=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 417: m_idTextStyle=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; case 418: m_idLayerArrow=GetLayerIdFromString(rb.resval.rstring, database()); free(rb.resval.rstring); break; //fall through intentional default: // An unrecognized group. Push it back so that // the subclass can read it again. pFiler->pushBackItem(); es = Acad::eEndOfFile; break; } } // At this point the es variable must contain eEndOfFile // - either from readResBuf() or from pushback. If not, // it indicates that an error happened and we should // return immediately. // if (es != Acad::eEndOfFile) return Acad::eInvalidResBuf; if (!(fieldsFlags&0x01)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 10")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x02)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 40")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x04)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 41")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x08)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 42")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x10)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 43")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x20)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 44")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x10000)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 49")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x800)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 71")); return Acad::eMissingDxfField; } if (!(fieldsFlags&0x1000)) { pFiler->setError(Acad::eMissingDxfField, _T("\nMissing DXF group code: 72")); return Acad::eMissingDxfField; } m_ptLocation=pt; SetStepHeight(r1); SetSpaceWidth(r2); SetSlabSize(r3); SetStepWidth(r4); SetStairWidth(r5); SetMStairWidth(r10); if(fieldsFlags&0x40) SetRailHeight(r6); if(fieldsFlags&0x80) SetRailWidth(r7); if(fieldsFlags&0x100) SetRailDistToSide(r8); if(fieldsFlags&0x200) SetRotation(r9); if(fieldsFlags&0x400) SetStairFlag(i1); SetStepNum1(i2); SetStepNum2(i3); m_nStartSide=i4; m_nAlignment=i5; return pFiler->filerStatus(); } Acad::ErrorStatus TDbParallelStair::dxfOutFields(AcDbDxfFiler* pFiler) const { assertReadEnabled(); Acad::ErrorStatus es; es = TDbPolyPathEnt::dxfOutFields(pFiler); assert(es == Acad::eOk); es = pFiler->writeItem(AcDb::kDxfSubclass,_T("TDbParallelStair")); assert(es == Acad::eOk); pFiler->writePoint3d(AcDb::kDxfXCoord, m_ptLocation); pFiler->writeDouble(AcDb::kDxfReal, GetStepHeight()); pFiler->writeDouble(AcDb::kDxfReal+1, GetSpaceWidth()); pFiler->writeDouble(AcDb::kDxfReal+2, GetSlabSize()); pFiler->writeDouble(AcDb::kDxfReal+3, GetStepWidth()); pFiler->writeDouble(AcDb::kDxfReal+4, GetStairWidth()); pFiler->writeDouble(AcDb::kDxfReal+5, GetRailHeight()); pFiler->writeDouble(AcDb::kDxfReal+6, GetRailWidth()); pFiler->writeDouble(AcDb::kDxfReal+7, GetRailDistToSide()); pFiler->writeDouble(AcDb::kDxfReal+8, GetMStairWidth()); pFiler->writeDouble(AcDb::kDxfReal+9, GetRailDistMid()); pFiler->writeDouble(AcDb::kDxfReal+11, GetRailDist()); pFiler->writeDouble(AcDb::kDxfReal+12, GetTextHeight()); pFiler->writeDouble(AcDb::kDxfReal+13, GetSectRotation()); pFiler->writeDouble(AcDb::kDxfReal+14, GetSlabSizeMid()); pFiler->writeDouble(AcDb::kDxfAngle, GetRotation()); pFiler->writeInt16(AcDb::kDxfInt16, GetStairFlag()); pFiler->writeInt16(AcDb::kDxfInt16+1, GetStepNum1()); pFiler->writeInt16(AcDb::kDxfInt16+2, GetStepNum2()); pFiler->writeInt16(AcDb::kDxfInt16+3, m_nStartSide); pFiler->writeInt16(AcDb::kDxfInt16+4, m_nAlignment); pFiler->writeInt16(AcDb::kDxfInt16+5, m_nViewCtrl); pFiler->writeInt16(AcDb::kDxfInt16+6, m_nSectStepNum); pFiler->writeInt32(90, m_nFlagEx); pFiler->writeDouble(145, m_nBeamHeight); pFiler->writeDouble(146, m_nBeamThick); pFiler->writeDouble(147, m_nSlabThick); pFiler->writeString(412, (const TCHAR *)LayerId2String(m_idLayerStep3d)); pFiler->writeString(413, (const TCHAR *)LayerId2String(m_idLayerBeam3d)); pFiler->writeString(414, (const TCHAR *)LayerId2String(m_idLayerHand3d)); pFiler->writeString(415, (const TCHAR *)LayerId2String(m_idLayerRail3d)); pFiler->writeString(416, (const TCHAR *)LayerId2String(m_idLayerText)); pFiler->writeString(417, (const TCHAR *)LayerId2String(m_idTextStyle)); pFiler->writeString(418, (const TCHAR *)LayerId2String(m_idLayerArrow)); return pFiler->filerStatus(); } Acad::ErrorStatus TDbParallelStair::subGetGripPoints(AcGePoint3dArray& gripPoints, AcDbIntArray& osnapModes, AcDbIntArray& geomIds) const { assertReadEnabled(); XPoint ptUpLeft=GetUpLeft2d(), ptUpRight=GetUpRight2d(); // 0,1--移动 gripPoints.append(ptUpLeft); gripPoints.append(ptUpRight); // 2,3--楼梯间 XPoint ptLeft, ptRight; double nDist=GetSlabSizeSide()+(m_nStepNum1-1)*m_nStepWidth/2.0; ads_polar(ptUpLeft, m_nRotation-PI/2.0, nDist, ptLeft); ads_polar(ptUpRight, m_nRotation-PI/2.0, nDist, ptRight); gripPoints.append(ptLeft); gripPoints.append(ptRight); // 4,5--楼梯边梯宽度 XPoint ptLeft1, ptRight1; ads_polar(ptLeft, m_nRotation, GetStairWidth(), ptLeft1); ads_polar(ptRight, m_nRotation+PI, GetStairWidth(), ptRight1); gripPoints.append(ptLeft1); gripPoints.append(ptRight1); double dStairWidth=0.0; //井宽 dStairWidth = (GetSpaceWidth() - GetStairWidth()*2.0-GetMStairWidth())/2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } // 6,7--楼梯中梯宽度 XPoint ptLeft2, ptRight2; ads_polar(ptLeft1, m_nRotation, dStairWidth, ptLeft2); ads_polar(ptLeft2, m_nRotation-PI*0.5, m_nStepWidth, ptLeft2); ads_polar(ptRight1, m_nRotation+PI, dStairWidth, ptRight2); ads_polar(ptRight2, m_nRotation-PI*0.5, m_nStepWidth, ptRight2); gripPoints.append(ptLeft2); gripPoints.append(ptRight2); // 8--休息平台 Midpoint(ptUpLeft,ptUpRight,ptLeft2); gripPoints.append(ptLeft2); // 9--中梯段位置 ads_polar(ptLeft2, m_nRotation-PI/2.0, GetSlabSizeMid(), ptLeft2); gripPoints.append(ptLeft2); // 10，11--边梯段位置 XPoint ptSlabLeft, ptSlabRight; ads_polar(ptUpLeft, m_nRotation-PI/2.0, GetSlabSizeSide(), ptSlabLeft); ads_polar(ptUpRight, m_nRotation-PI/2.0, GetSlabSizeSide(), ptSlabRight); gripPoints.append(ptSlabLeft); gripPoints.append(ptSlabRight); { XPoint ptTmp; //12,13--休息平台段扶手伸出距离 ads_polar(ptUpLeft, m_nRotation-PI/2, min(GetSlabSizeSide(),GetSlabSizeMid())-m_nRailDistMid, ptTmp); ads_polar(ptTmp, m_nRotation, m_nStairWidth+dStairWidth*0.5, ptTmp); gripPoints.append(ptTmp); ads_polar(ptTmp, m_nRotation, m_nMStairWidth+dStairWidth, ptTmp); gripPoints.append(ptTmp); double nLenSide=GetStepWidth()*(GetStepNum1()-1)+GetSlabSizeSide(), nLenMid=GetStepWidth()*(GetStepNum2()-1)+GetSlabSizeMid(); //梯段与平台总长 //14,15--楼层连接段扶手伸出距离 ads_polar(ptUpLeft, m_nRotation-PI/2, m_nRailDist+max(nLenMid,nLenSide), ptTmp); ads_polar(ptTmp, m_nRotation, m_nStairWidth+dStairWidth*0.5, ptTmp); gripPoints.append(ptTmp); ads_polar(ptTmp, m_nRotation, m_nMStairWidth+dStairWidth, ptTmp); gripPoints.append(ptTmp); } { //剖切线 XPoint ptLeft, ptRight; double lSectPos,rSectPos; if(CalSectPos(lSectPos,rSectPos,ptLeft,ptRight)) { XPoint ptMid; Midpoint(ptLeft,ptRight,ptMid); gripPoints.append(ptMid); gripPoints.append(ptLeft); gripPoints.append(ptRight); int nSectStair=GetSectStairPos(); if(nSectStair==1)//边梯有两段剖切线 { ads_polar(ptLeft, m_nRotation, (GetSpaceWidth() - GetStairWidth()), ptLeft); ads_polar(ptRight, m_nRotation, (GetSpaceWidth() - GetStairWidth()), ptRight); gripPoints.append(ptLeft); gripPoints.append(ptRight); Midpoint(ptLeft,ptRight,ptMid); gripPoints.append(ptMid); } } } return Acad::eOk; } Acad::ErrorStatus TDbParallelStair::subGetStretchPoints(AcGePoint3dArray & stretchPoints) const { assertReadEnabled(); XPoint ptUpLeft=GetUpLeft2d(); stretchPoints.append(ptUpLeft); return Acad::eOk; } Acad::ErrorStatus TDbParallelStair::GetGripText(int i, CString &cs) const { switch(i) { case 0: case 1: cs=_T("移动楼梯"); break; case 2: case 3: cs=_T("改楼梯间宽度"); break; case 4: case 5: cs=_T("改边梯段宽度"); break; case 6: case 7: cs=_T("改中梯段宽度"); break; case 8: cs=_T("改平台宽"); break; case 9: cs=_T("改中梯段位置"); break; case 10: case 11: cs=_T("改边梯段位置"); break; case 12: case 13: case 14: case 15: cs=_T("改扶手伸出距离"); break; case 16: case 21: cs=_T("移动剖切位置"); break; case 17: case 18: case 19: case 20: cs=_T("修改剖切角度"); break; default: break; } return Acad::eOk; } Acad::ErrorStatus TDbParallelStair::subTransformBy(const AcGeMatrix3d& xform) { assertWriteEnabled(); TDbEntity::subTransformBy(xform); XPoint ptX, ptY; ads_polar(m_ptLocation, m_nRotation, GetSpaceWidth(), ptX); ads_polar(m_ptLocation, m_nRotation+PI/2.0, 1000.0, ptY); ((AcGePoint3d &)ptX).transformBy(xform); ((AcGePoint3d &)ptY).transformBy(xform); ((AcGePoint3d &)m_ptLocation).transformBy(xform); double nAng = CT_std_angle(ads_angle(m_ptLocation, ptY)- ads_angle(m_ptLocation, ptX)); if(fabs(nAng-PI*1.5)<_angSnap) { TchPrivate::Exchange(m_ptLocation, ptX); m_dSectRotation=-m_dSectRotation; } m_nRotation = ads_angle(m_ptLocation, ptX); return Acad::eOk; } Acad::ErrorStatus TDbParallelStair::subMoveGripPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset) { assertWriteEnabled(); XPoint vtOffset=*(XPoint *)&offset; vtOffset.z = 0; double nVtRot=CT_std_angle(ads_angle(XPoint(), vtOffset)-m_nRotation); double nIncWidth=ads_distance(XPoint(), vtOffset) * cos(nVtRot); double nIncLen=ads_distance(XPoint(), vtOffset) * sin(nVtRot); int nLen=indices.length(); for (int i = 0; i < nLen; i++) { int idx = indices[i]; switch(idx) { case 0: case 1: //移动楼梯 if(nLen==1) { m_ptLocation += vtOffset; } break; case 2: //改楼梯间宽度 if(m_nSpaceWidth-nIncWidth > _DIST_SNAP && -1.0E-6 _DIST_SNAP && -1.0E-6 _DIST_SNAP && -1.0E-6 _DIST_SNAP && -1.0E-6 _DIST_SNAP && -1.0E-6 _DIST_SNAP && -1.0E-6_DIST_SNAP&&GetSlabSizeMid()+nIncLen>_DIST_SNAP) { m_nSlabSizeSide = GetSlabSizeSide()+nIncLen; m_nSlabSizeMid = GetSlabSizeMid()+nIncLen; m_nSlabSize += nIncLen; ads_polar(XPoint(m_ptLocation), m_nRotation+PI*0.5, nIncLen, m_ptLocation); } else { double nSize=GetSlabSizeSide()>GetSlabSizeMid()?GetSlabSizeMid():GetSlabSizeSide(); m_nSlabSizeSide = GetSlabSizeSide()-nSize; m_nSlabSizeMid = GetSlabSizeMid()-nSize; m_nSlabSize -= nSize; ads_polar(XPoint(m_ptLocation), m_nRotation+PI*0.5, -nSize, m_ptLocation); } break; case 9: //改中梯段位置 if(GetSlabSizeMid()-nIncLen>_DIST_SNAP) m_nSlabSizeMid = GetSlabSizeMid()-nIncLen; else m_nSlabSizeMid = 0; //modify xlc on 090730 预览显示不正确 //if(GetSlabSizeMid()_DIST_SNAP) m_nSlabSizeSide = GetSlabSizeSide()-nIncLen; else m_nSlabSizeSide = 0; //modify xlc on 090730 预览显示不正确 //if(GetSlabSizeSide()_DIST_SNAP) m_nRailDistMid += nIncLen; else m_nRailDistMid = 0; break; case 14: case 15: if(m_nRailDist-nIncLen>-0.5*(m_nStepNum1>m_nStepNum2?m_nStepNum2:m_nStepNum1)*m_nStepWidth-_DIST_SNAP) m_nRailDist -= nIncLen; break; case 16: case 17: case 18: case 19: case 20: case 21: //剖切位置 { double lSectPos,rSectPos; XPoint ptLeft2d,ptRight2d; double angle=m_dSectRotation; if(CalSectPos(lSectPos,rSectPos,ptLeft2d,ptRight2d)) { XPoint ptMid; Midpoint(ptLeft2d,ptRight2d,ptMid); if(idx==16||idx==21) { XPoint ptHit2d; if(idx==16) ptHit2d=ptMid; else ads_polar(ptMid, m_nRotation, (GetSpaceWidth() - GetStairWidth()), ptHit2d); ptHit2d += vtOffset; int nPosHit=HitSectPosByPoint2d(ptHit2d); if(nPosHit!=-1) { m_nSectStepNum = nPosHit; } } else { XPoint ptTmp; ads_polar(ptMid, m_nRotation, m_nMStairWidth, ptTmp); AcGeVector3d vectFrom,vectTo; vectFrom=ptMid-ptTmp; if((idx-15)%2==0) { ptTmp=ptLeft2d+vtOffset; vectTo=ptTmp-ptMid; } else { ptTmp=ptRight2d+vtOffset; vectTo=ptMid-ptTmp; } angle=vectFrom.angleTo(vectTo,AcGeVector3d::kZAxis); SetSectRotation(angle); } } break; } default: break; } } return Acad::eOk; //return TDbEntity::moveGripPointsAt(indices, offset); } Acad::ErrorStatus TDbParallelStair::subMoveStretchPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset) { assertWriteEnabled(); if(indices.length()) { AcGeMatrix3d mat; mat.setToTranslation(offset); subTransformBy(mat); } return Acad::eOk; } const TCHAR * TDbParallelStair::GetDefaultLayer() const { return LAY_STAIR; } void TDbParallelStair::GetTips(DList &lstInfo) const { lstInfo.Append(new TObjInfoUnit(_T("对象类型"), _T("双分平行楼梯"))); lstInfo.Append(new TObjInfoUnit(_T("边跑步数"), XString(_T("%d"), int(GetStepNum1())))); lstInfo.Append(new TObjInfoUnit(_T("中跑步数"), XString(_T("%d"), int(GetStepNum2())))); lstInfo.Append(new TObjInfoUnit(_T("踏步高"), Dist2Str(GetStepHeight()))); lstInfo.Append(new TObjInfoUnit(_T("踏步宽"), Dist2Str(GetStepWidth()))); lstInfo.Append(new TObjInfoUnit(_T("楼梯高"), Dist2Str(GetStepHeight()*(GetStepNum1()+GetStepNum2())))); lstInfo.Append(new TObjInfoUnit(_T("边跑梯段宽"), Dist2Str(GetStairWidth()))); lstInfo.Append(new TObjInfoUnit(_T("中跑梯段宽"), Dist2Str(GetMStairWidth()))); lstInfo.Append(new TObjInfoUnit(_T("梯间宽"), Dist2Str(GetSpaceWidth()))); lstInfo.Append(new TObjInfoUnit(_T("扶手宽"), Dist2Str(GetRailWidth()))); lstInfo.Append(new TObjInfoUnit(_T("扶手边距"), Dist2Str(GetRailDistToSide()))); lstInfo.Append(new TObjInfoUnit(_T("平台宽"), Dist2Str(GetSlabSize()))); lstInfo.Append(new TObjInfoUnit(_T("底标高"), Dist2Str(GetElevation()))); const TCHAR *pszFloor=_T("首层"); if(m_nStairFlag==1) pszFloor=_T("中间层"); else if(m_nStairFlag==2) pszFloor=_T("顶层"); lstInfo.Append(new TObjInfoUnit(_T("楼层标记"), pszFloor)); const TCHAR *pszStep=_T("齐平台"); if(m_nAlignment==1) pszStep=_T("齐中间"); else if(m_nAlignment==2) pszStep=_T("齐楼板"); else pszStep=_T("自由"); lstInfo.Append(new TObjInfoUnit(_T("踏步取齐"), pszStep)); lstInfo.Append(new TObjInfoUnit(_T("上楼位置"), m_nStartSide? _T("边跑") : _T("中跑"))); } //中跑起步时的内侧扶手 void TDbParallelStair::GetRailFromMid(TDbLineStair &stair1, //[in/out]边跑左梯段 TDbLineStair &stair2, //[in/out]中跑梯段 TDbLineStair &stair3, //[in/out]边跑右梯段 XPoly2D &polyRail, //[in/out]内侧左扶手 XPoly2D &polyRail2, //[in/out]内侧右扶手 XPoint &ptStart, //[in/out]左侧扶手顶点 XPoint &ptStart2 //[in/out]右侧扶手顶点 )const { double nDistToSide=((GetSpaceWidth()-2*GetStairWidth()-GetMStairWidth())<_DIST_SNAP*2&&m_nRailDistToSide<0) ? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double dStairWidth=0.0; //井宽 dStairWidth = (m_nSpaceWidth - m_nStairWidth*2.0-m_nMStairWidth)/2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } //梯段位置 XPoint ptLoc1, ptLoc2, ptLoc3; ptLoc1 = stair1.GetLocation(); ptLoc2 = stair2.GetLocation(); ptLoc3 = stair3.GetLocation(); //梯段长度 double nLen1=(m_nStepNum1-1)*m_nStepWidth, nLen2=(m_nStepNum2-1)*m_nStepWidth; double nRailDist=m_nRailDist-m_nRailWidth*0.5, nRailDistMid=m_nRailDistMid-m_nRailWidth*0.5; //扶手有连接时回缩半个扶手宽度 //扶手伸出距离为负时产生的高差 double elev1=(nRailDist/nLen2)*(stair2.GetStairHeight()-m_nStepHeight), elev2=(nRailDistMid/nLen2)*(stair2.GetStairHeight()-m_nStepHeight); double nLenSide=nLen1+GetSlabSizeSide(),nLenMid=nLen2+GetSlabSizeMid(); //梯段与平台总长，判断是否齐楼板 if(m_nStairFlag!=SF_TOP) { BOOL bFlag=FALSE; //if(m_nStairFlag!=SF_FIRST && nLen2 m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc2.z; } else { ptStart.z = ptLoc2.z-m_nStepHeight*0.5+elev1; } polyRail.AppendNode(ptStart); ptStart2.z = ptStart.z; polyRail2.AppendNode(ptStart2); //中梯与边梯下对齐点 ads_polar(XPoint(ptStart), m_nRotation, dStairWidth + nDistToSide*2, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI, dStairWidth + nDistToSide*2, ptStart2); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc2.z; } else { ptStart.z = ptLoc2.z+m_nStepHeight*0.5-elev1; } ptStart2.z = ptStart.z; polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); bFlag=TRUE; } if(m_nStairFlag==SF_MIDDLE) { //if(nLen2>nLen1+_DIST_SNAP && m_nAlignment!=2) if(nLenMid>nLenSide+_DIST_SNAP) { //扶手在边梯起点 ads_polar(ptLoc1, m_nRotation-PI/2, nLen1+nRailDist, ptStart); ads_polar(XPoint(ptStart), m_nRotation+PI, nDistToSide, ptStart); ads_polar(ptLoc3, m_nRotation-PI/2, nLen1+nRailDist, ptStart2); ads_polar(XPoint(ptStart2), m_nRotation+PI, m_nStairWidth-nDistToSide, ptStart2); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc2.z; } else { ptStart.z = ptLoc2.z-m_nStepHeight*0.5+elev1; } ptStart2.z = ptStart.z; polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); // 边梯下水平段顶点 //ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, (m_nAlignment==1? (nLen2-nLen1)/2.0 : (nLen2-nLen1)), ptStart); //ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, (m_nAlignment==1? (nLen2-nLen1)/2.0 : (nLen2-nLen1)), ptStart2); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, nLenMid-nLenSide, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nLenMid-nLenSide, ptStart2); polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } else { if(!bFlag) { //扶手在边梯起点 ads_polar(ptLoc2, m_nRotation+PI, dStairWidth + nDistToSide, ptStart); ads_polar(ptLoc2, m_nRotation, m_nMStairWidth + dStairWidth + nDistToSide, ptStart2); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, nRailDist, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0,nRailDist, ptStart2); if(nRailDist < m_nStepWidth*0.5-_DIST_SNAP) { ptStart.z = ptLoc2.z-m_nStepHeight*0.5+elev1; } ptStart2.z = ptStart.z; polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } } } } else { //中梯下水平段点 /*if(nLen2=m_nRailWidth) { ptStart.z = ptLoc2.z+m_nStepHeight*0.5; ptStart2.z = ptLoc2.z+m_nStepHeight*0.5; } else { ads_polar(XPoint(ptStart), m_nRotation-PI/2.0,nRailDist-m_nRailWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nRailDist-m_nRailWidth*0.5, ptStart2); ptStart.z = ptLoc2.z-elev1+m_nStepHeight*0.5; ptStart2.z = ptLoc2.z-elev1+m_nStepHeight*0.5; } } else { if(nRailDist>=m_nRailWidth) { ptStart.z = ptLoc2.z+m_nStepHeight*0.5; ptStart2.z = ptLoc2.z+m_nStepHeight*0.5; } else { ads_polar(XPoint(ptStart), m_nRotation-PI/2.0,nRailDist-m_nRailWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nRailDist-m_nRailWidth*0.5, ptStart2); ptStart.z = ptLoc2.z-elev1+m_nStepHeight*0.5; ptStart2.z = ptLoc2.z-elev1+m_nStepHeight*0.5; } } } else { if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, nRailDist, ptStart); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nRailDist, ptStart2); polyRail2.AppendNode(ptStart2); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart2); } else { ads_polar(XPoint(ptStart), m_nRotation-PI/2.0,nRailDist, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nRailDist, ptStart2); ptStart.z = ptLoc2.z-elev1+m_nStepHeight*0.5; ptStart2.z = ptLoc2.z-elev1+m_nStepHeight*0.5; } } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); //中梯扶手上顶点 ads_polar(ptLoc2, m_nRotation, nDistToSide, ptStart); ads_polar(ptLoc2, m_nRotation, m_nMStairWidth-nDistToSide, ptStart2); if(nRailDistMid > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nLen2+m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc2.z+stair2.GetStairHeight(); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nRailDistMid-m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nLen2+m_nStepWidth*0.5, ptStart2); ptStart2.z = ptLoc2.z+stair2.GetStairHeight(); polyRail2.AppendNode(ptStart2); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nRailDistMid-m_nStepWidth*0.5, ptStart2); } else { ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nLen2+nRailDistMid, ptStart); ptStart.z = ptLoc2.z+stair2.GetStairHeight()-m_nStepHeight*0.5+elev2; ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nLen2+nRailDistMid, ptStart2); ptStart2.z = ptLoc2.z+stair2.GetStairHeight()-m_nStepHeight*0.5+elev2; } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); /*if(nLen1GetSlabSizeMid()+_DIST_SNAP) { //边梯休息台水平段顶点 ads_polar(XPoint(ptStart), m_nRotation+PI,dStairWidth+nDistToSide*2, ptStart); if(nRailDistMid < m_nStepWidth*0.5-_DIST_SNAP) { ptStart.z = ptLoc1.z+m_nStepHeight*0.5-elev2; } polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart2), m_nRotation,dStairWidth+nDistToSide*2, ptStart2); ptStart2.z = ptStart.z; polyRail2.AppendNode(ptStart2); } else if(GetSlabSizeMid()>GetSlabSizeSide()+_DIST_SNAP) { //中梯休息台水平段顶点 ads_polar(XPoint(ptStart), m_nRotation+PI/2.0,GetSlabSizeMid()-GetSlabSizeSide(), ptStart); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0,GetSlabSizeMid()-GetSlabSizeSide(), ptStart2); polyRail2.AppendNode(ptStart2); } //边梯扶手上顶点 ads_polar(XPoint(ptLoc1), m_nRotation+PI,nDistToSide, ptStart); ads_polar(XPoint(ptLoc3), m_nRotation+PI,m_nStairWidth-nDistToSide, ptStart2); if(nRailDistMid > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), m_nRotation+PI/2.0,nRailDistMid, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0,nRailDistMid, ptStart2); polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0,nRailDistMid-m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0,nRailDistMid-m_nStepWidth*0.5, ptStart2); } else { ads_polar(XPoint(ptStart), m_nRotation+PI/2.0,nRailDistMid, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0,nRailDistMid, ptStart2); ptStart.z = ptLoc1.z + m_nStepHeight*0.5 - elev2; ptStart2.z = ptStart.z; } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); //边梯扶手下顶点 ads_polar(ptLoc1, stair1.GetRotation(), nDistToSide, ptStart); ads_polar(ptLoc3, stair1.GetRotation(), m_nStairWidth - nDistToSide, ptStart2); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nLen1+m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc1.z+stair1.GetStairHeight(); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), stair3.GetRotation()+PI/2.0, nLen1+m_nStepWidth*0.5, ptStart2); ptStart2.z = ptStart.z; polyRail2.AppendNode(ptStart2); ads_polar(XPoint(ptStart2), stair3.GetRotation()+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart2); } else { ads_polar(XPoint(ptStart), stair1.GetRotation()+PI/2.0, nLen1+nRailDist, ptStart); ptStart.z = ptLoc1.z+stair1.GetStairHeight()-m_nStepHeight*0.5+elev1; ads_polar(XPoint(ptStart2), stair3.GetRotation()+PI/2.0, nLen1+nRailDist, ptStart2); ptStart2.z = ptStart.z; } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } //边跑起步时的内侧扶手 void TDbParallelStair::GetRailFromSide(TDbLineStair &stair1, //[in/out]边跑左梯段 TDbLineStair &stair2, //[in/out]中跑梯段 TDbLineStair &stair3, //[in/out]边跑右梯段 XPoly2D &polyRail, //[in/out]内侧左扶手 XPoly2D &polyRail2, //[in/out]内侧右扶手 XPoint &ptStart, //[in/out]左侧扶手顶点 XPoint &ptStart2 //[in/out]右侧扶手顶点 )const { double nDistToSide=((GetSpaceWidth()-2*GetStairWidth()-GetMStairWidth())<_DIST_SNAP*2&&m_nRailDistToSide<0) ? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double dStairWidth=0.0; //井宽 dStairWidth = (m_nSpaceWidth - m_nStairWidth*2.0-m_nMStairWidth)/2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } //梯段位置 XPoint ptLoc1, ptLoc2, ptLoc3; ptLoc1 = stair1.GetLocation(); ptLoc2 = stair2.GetLocation(); ptLoc3 = stair3.GetLocation(); //梯段长度 double nLen1=(m_nStepNum1-1)*m_nStepWidth, nLen2=(m_nStepNum2-1)*m_nStepWidth; double nRailDist=m_nRailDist-m_nRailWidth*0.5, nRailDistMid=m_nRailDistMid-m_nRailWidth*0.5; //扶手有连接时回缩半个扶手宽度 //扶手伸出距离为负时产生的高差 double elev1=(nRailDist/nLen1)*(stair1.GetStairHeight()-m_nStepHeight), elev2=(nRailDistMid/nLen1)*(stair1.GetStairHeight()-m_nStepHeight); double nLenSide=nLen1+GetSlabSizeSide(),nLenMid=nLen2+GetSlabSizeMid(); //梯段与平台总长，判断是否齐楼板 if(m_nStairFlag!=SF_TOP) //首层或中间层 { BOOL bFlag=FALSE; // //if(m_nStairFlag!=SF_FIRST && nLen2 m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z - m_nStepHeight * 0.5 + elev1; } polyRail.AppendNode(ptStart); ads_polar(ptLoc2, m_nRotation-PI/2, nLen2+nRailDist, ptStart2); ads_polar(XPoint(ptStart2), m_nRotation+PI, nDistToSide, ptStart2); ptStart2.z = ptStart.z; polyRail2.AppendNode(ptStart2); //中梯下水平段顶点 //ads_polar(XPoint(ptStart), m_nRotation-PI/2.0,(m_nAlignment==1? (nLen1-nLen2)/2.0 : (nLen1-nLen2)), ptStart); //ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0,(m_nAlignment==1? (nLen1-nLen2)/2.0 : (nLen1-nLen2)), ptStart2); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0,nLenSide-nLenMid, ptStart); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0,nLenSide-nLenMid, ptStart2); polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); bFlag=TRUE; } if(m_nStairFlag==SF_MIDDLE) { //if(nLen2>nLen1+_DIST_SNAP && m_nAlignment!=2) if(nLenMid>nLenSide+_DIST_SNAP) { //扶手从中梯开始 ads_polar(ptLoc2, m_nRotation-PI/2, nLen2+nRailDist, ptStart); ads_polar(XPoint(ptStart), m_nRotation+PI, m_nMStairWidth - nDistToSide, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z - m_nStepHeight * 0.5 + elev1; } polyRail.AppendNode(ptStart); ads_polar(ptLoc2, m_nRotation-PI/2, nLen2+nRailDist, ptStart2); ads_polar(XPoint(ptStart2), m_nRotation+PI, nDistToSide, ptStart2); ptStart2.z = ptStart.z; polyRail2.AppendNode(ptStart2); //边梯与中梯的对齐点 ads_polar(XPoint(ptStart), m_nRotation+PI, dStairWidth + nDistToSide*2, ptStart); ads_polar(XPoint(ptStart2), m_nRotation, dStairWidth + nDistToSide*2, ptStart2); if(nRailDist < m_nStepWidth*0.5-_DIST_SNAP) { ptStart.z = ptLoc1.z + m_nStepHeight * 0.5 - elev1; } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } else { if(!bFlag) { //中梯起点 ads_polar(ptLoc2, m_nRotation-PI/2, nLen2+nRailDist, ptStart); ads_polar(XPoint(ptStart), m_nRotation+PI, m_nMStairWidth - nDistToSide, ptStart); ads_polar(ptLoc2, m_nRotation-PI/2, nLen2+nRailDist, ptStart2); ads_polar(XPoint(ptStart2), m_nRotation+PI, nDistToSide, ptStart2); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z - m_nStepHeight * 0.5 + elev1; } ptStart2.z = ptStart.z; polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } } } } else { /*if(nLen2>nLen1+_DIST_SNAP&&m_nAlignment!=2) { //边梯起点 ads_polar(ptLoc2, m_nRotation, dStairWidth + nDistToSide, ptStart2); ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0,nLen2+nRailDist, ptStart2); ads_polar(ptLoc2, m_nRotation+PI,m_nMStairWidth+dStairWidth+ nDistToSide, ptStart); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, nLen2+nRailDist, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ptStart.z = ptLoc1.z; } else { ptStart.z = ptLoc1.z - m_nStepHeight * 0.5 + elev1; } ptStart2.z = ptStart.z; polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); }*/ } //边梯下顶点 ads_polar(ptLoc1, m_nRotation, m_nStairWidth - nDistToSide, ptStart); ads_polar(ptLoc3, m_nRotation, nDistToSide, ptStart2); if(m_nStairFlag==SF_TOP) { if(nLenSide=m_nRailWidth) { ptStart.z = ptLoc1.z + m_nStepHeight * 0.5; ptStart2.z = ptLoc1.z + m_nStepHeight * 0.5; } else { ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nRailDist-m_nRailWidth*0.5, ptStart2); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, nRailDist-m_nRailWidth*0.5, ptStart); ptStart.z = ptLoc1.z + m_nStepHeight * 0.5 - elev1; ptStart2.z = ptLoc1.z + m_nStepHeight * 0.5 - elev1; } } else { if(nRailDist>=m_nRailWidth) { ptStart.z = ptLoc1.z + m_nStepHeight * 0.5; ptStart2.z = ptLoc1.z + m_nStepHeight * 0.5; } else { ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nRailDist-m_nRailWidth*0.5, ptStart2); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, nRailDist-m_nRailWidth*0.5, ptStart); ptStart.z = ptLoc1.z + m_nStepHeight * 0.5 - elev1; ptStart2.z = ptLoc1.z + m_nStepHeight * 0.5 - elev1; } } } else { ads_polar(XPoint(ptStart2), m_nRotation-PI/2.0, nRailDist, ptStart2); ads_polar(XPoint(ptStart), m_nRotation-PI/2.0, nRailDist, ptStart); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart2); } else { ptStart.z = ptLoc1.z + m_nStepHeight * 0.5 - elev1; ptStart2.z = ptLoc1.z + m_nStepHeight * 0.5 - elev1; } } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); //边梯上顶点 ads_polar(ptLoc1, m_nRotation, m_nStairWidth - nDistToSide, ptStart); ads_polar(ptLoc3, m_nRotation, nDistToSide, ptStart2); if(nRailDistMid > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nLen1+m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nLen1+m_nStepWidth*0.5, ptStart2); ptStart.z = ptLoc1.z + stair1.GetStairHeight(); ptStart2.z = ptLoc1.z + stair1.GetStairHeight(); polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nRailDistMid-m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nRailDistMid-m_nStepWidth*0.5, ptStart2); } else { ads_polar(XPoint(ptStart), m_nRotation+PI/2.0, nLen1+nRailDistMid, ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0, nLen1+nRailDistMid, ptStart2); ptStart.z = ptLoc1.z + stair1.GetStairHeight() - m_nStepHeight*0.5 + elev2; ptStart2.z = ptLoc1.z + stair1.GetStairHeight() - m_nStepHeight*0.5 + elev2; } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); /*if(nLen1GetSlabSizeMid()+_DIST_SNAP) { // 边梯上水平段顶点 ads_polar(XPoint(ptStart), m_nRotation+PI/2.0,GetSlabSizeSide()-GetSlabSizeMid(), ptStart); ads_polar(XPoint(ptStart2), m_nRotation+PI/2.0,GetSlabSizeSide()-GetSlabSizeMid(), ptStart2); polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } //中梯与边梯对齐点 ads_polar(XPoint(ptStart), m_nRotation, dStairWidth+nDistToSide*2, ptStart); ads_polar(XPoint(ptStart2),(m_nRotation+PI),dStairWidth+nDistToSide*2, ptStart2); if(nRailDistMid < m_nStepWidth*0.5-_DIST_SNAP) { ptStart.z = ptLoc2.z + m_nStepHeight*0.5 - elev2; } ptStart2.z = ptStart.z; polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); /*if(nLen2 m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(ptLoc2, stair2.GetRotation(), m_nMStairWidth-nDistToSide, ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()-PI/2.0, m_nStepWidth*0.5, ptStart); ads_polar(ptLoc2, stair2.GetRotation(), nDistToSide, ptStart2); ads_polar(XPoint(ptStart2), stair2.GetRotation()-PI/2.0, m_nStepWidth*0.5, ptStart2); ptStart.z = ptLoc2.z; ptStart2.z = ptLoc2.z; polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } // 中梯下顶点 ads_polar(ptLoc2, stair2.GetRotation(), m_nMStairWidth-nDistToSide, ptStart); ads_polar(ptLoc2, stair2.GetRotation(), nDistToSide, ptStart2); if(nRailDist > m_nStepWidth*0.5+_DIST_SNAP) { ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0, nLen2+m_nStepWidth*0.5, ptStart); ptStart.z = ptLoc2.z+stair2.GetStairHeight(); polyRail.AppendNode(ptStart); ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart); ads_polar(XPoint(ptStart2), stair2.GetRotation()+PI/2.0, nLen2+m_nStepWidth*0.5, ptStart2); ptStart2.z = ptLoc2.z+stair2.GetStairHeight(); polyRail2.AppendNode(ptStart2); ads_polar(XPoint(ptStart2), stair2.GetRotation()+PI/2.0, nRailDist-m_nStepWidth*0.5, ptStart2); } else { ads_polar(XPoint(ptStart), stair2.GetRotation()+PI/2.0, nLen2+nRailDist, ptStart); ptStart.z = ptLoc2.z+stair2.GetStairHeight()-0.5*m_nStepHeight+elev1; ads_polar(XPoint(ptStart2), stair2.GetRotation()+PI/2.0, nLen2+nRailDist, ptStart2); ptStart2.z = ptStart.z; } polyRail.AppendNode(ptStart); polyRail2.AppendNode(ptStart2); } Acad::ErrorStatus TDbParallelStair::ExplodeTo(TDbLineStair &stair1, //[in/out]边跑左梯段 TDbLineStair &stair2, //[in/out]中跑梯段 TDbLineStair &stair3, //[in/out]边跑右梯段 TDbSlab &slab, //[in/out]休息平台 TDbHandRail &rail, //[in/out]中跑左扶手 TDbHandRail &rail2, //[in/out]中跑右扶手 TDbHandRail *pRailTop, //[out]顶层扶手(中间或左侧) TDbHandRail *pRailTop2, //[out]顶层扶手(右侧) TDbHandRail *pRailOut1, //[out]边跑左梯段外侧扶手 TDbHandRail*pRailOut2 //[out]边跑右梯段外侧扶手 ) const { assertReadEnabled(); int nSectStair=GetSectStairPos(); XPoint ptUpLeft=GetUpLeft2d(), ptUpRight=GetUpRight2d(),ptUpMid; Midpoint(ptUpLeft,ptUpRight,ptUpMid); XPoint ptLowLeft, ptLowMid, ptLowRight; //休息平台板的顶点 double nLen1=(m_nStepNum1-1)*m_nStepWidth, nLen2=(m_nStepNum2-1)*m_nStepWidth; //modify by xlc on 080725 增加调整梯段位置功能 /*if(fabs(nLen1-nLen2)>_DIST_SNAP) { if(m_nAlignment==0) { ads_polar(ptUpLeft, m_nRotation-PI/2, m_nSlabSize, ptLowLeft); ads_polar(ptUpRight, m_nRotation-PI/2, m_nSlabSize, ptLowRight); ads_polar(ptLowLeft, m_nRotation, m_nSpaceWidth*0.5, ptLowMid); } else { double nTemp=(m_nAlignment==1)? 2.0 : 1.0; if(nLen1>nLen2) //边梯长 { ads_polar(ptUpLeft, m_nRotation-PI/2, m_nSlabSize, ptLowLeft); ads_polar(ptUpRight,m_nRotation-PI/2, m_nSlabSize, ptLowRight); ads_polar(ptUpLeft, m_nRotation, m_nSpaceWidth*0.5, ptLowMid); ads_polar(ptLowMid,m_nRotation-PI/2, m_nSlabSize+(nLen1-nLen2)/nTemp, ptLowMid); } else //中梯长 { ads_polar(ptUpLeft, m_nRotation-PI/2, m_nSlabSize+(nLen2-nLen1)/nTemp, ptLowLeft); ads_polar(ptUpRight,m_nRotation-PI/2, m_nSlabSize+(nLen2-nLen1)/nTemp, ptLowRight); ads_polar(ptUpLeft, m_nRotation, m_nSpaceWidth*0.5, ptLowMid); ads_polar(ptLowMid,m_nRotation-PI/2, m_nSlabSize, ptLowMid); } } } else { ads_polar(ptUpLeft, m_nRotation-PI/2.0, m_nSlabSize, ptLowLeft); ads_polar(ptUpRight, m_nRotation-PI/2.0, m_nSlabSize, ptLowRight); ads_polar(ptLowLeft, m_nRotation, m_nSpaceWidth*0.5, ptLowMid); } */ ads_polar(ptUpLeft, m_nRotation-PI/2, GetSlabSizeSide(), ptLowLeft); ads_polar(ptUpRight, m_nRotation-PI/2,GetSlabSizeSide(), ptLowRight); ads_polar(ptUpMid, m_nRotation-PI/2, GetSlabSizeMid(), ptLowMid); //设置梯段宽度 stair1.SetStairWidth(m_nStairWidth); stair2.SetStairWidth(m_nMStairWidth); stair3.SetStairWidth(m_nStairWidth); //设置踏步高度 stair1.SetStepHeight(m_nStepHeight); stair2.SetStepHeight(m_nStepHeight); stair3.SetStepHeight(m_nStepHeight); //设置踏步宽度 stair1.SetStepWidth(m_nStepWidth); stair2.SetStepWidth(m_nStepWidth); stair3.SetStepWidth(m_nStepWidth); //设置踏步数 stair1.SetStepNum(m_nStepNum1); stair2.SetStepNum(m_nStepNum2); stair3.SetStepNum(m_nStepNum1); //设置踏步旋转角度 if(m_nStartSide == OFFSET_MID) { stair1.SetRotation(CT_std_angle(m_nRotation+PI)); stair2.SetRotation(m_nRotation); stair3.SetRotation(CT_std_angle(m_nRotation+PI)); } else { stair1.SetRotation(m_nRotation); stair2.SetRotation(CT_std_angle(m_nRotation+PI)); stair3.SetRotation(m_nRotation); } //计算梯段位置 XPoint ptLoc1, ptLoc2, ptLoc3; if(m_nStartSide==OFFSET_MID) //中跑上楼 { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth, ptLoc1); XPoint ptTmp; ads_polar(ptLowMid, m_nRotation+PI, m_nMStairWidth*0.5, ptTmp); ads_polar(ptTmp, m_nRotation-PI/2, nLen2, ptLoc2); ptLoc3=ptLowRight; ptLoc2.z = m_ptLocation.z; ptLoc1.z = ptLoc3.z = ptLoc2.z + m_nStepNum2*m_nStepHeight; } else { ads_polar(ptLowLeft, m_nRotation-PI/2, nLen1, ptLoc1); ads_polar(ptLowMid, m_nRotation, m_nMStairWidth*0.5, ptLoc2); XPoint ptTmp; ads_polar(ptLowRight, m_nRotation+PI, m_nStairWidth, ptTmp); ads_polar(ptTmp, m_nRotation-PI/2, nLen1, ptLoc3); ptLoc1.z = ptLoc3.z = m_ptLocation.z; ptLoc2.z = ptLoc1.z + m_nStepNum1*m_nStepHeight; } //设置梯段位置 stair1.SetLocation(ptLoc1); stair2.SetLocation(ptLoc2); stair3.SetLocation(ptLoc3); //设置梯段标记 stair1.Set3DFlag(m_nStairFlag==SF_TOP? 0 : SF_HAS3D); stair2.Set3DFlag(m_nStairFlag==SF_TOP? 0 : SF_HAS3D); stair3.Set3DFlag(m_nStairFlag==SF_TOP? 0 : SF_HAS3D); if(m_nStairFlag==SF_FIRST) //首层 { if(nSectStair==0) //中梯剖断 { stair2.Set2DFlag(SF_1SECT); if(m_nStartSide!=OFFSET_MID)//边梯起步 { stair1.Set2DFlag(SF_NOSECT); stair3.Set2DFlag(SF_NOSECT); } } else if(nSectStair==1) //边梯剖断 { stair1.Set2DFlag(SF_1SECT); stair3.Set2DFlag(SF_1SECT); if(m_nStartSide==OFFSET_MID)//中梯上楼 stair2.Set2DFlag(SF_NOSECT); } } else if(m_nStairFlag==SF_MIDDLE) //中间层 { if(nSectStair==0) //中梯剖断 { stair2.Set2DFlag(SF_2SECT); stair1.Set2DFlag(SF_NOSECT); stair3.Set2DFlag(SF_NOSECT); } else if(nSectStair==1) //边梯剖断 { stair1.Set2DFlag(SF_2SECT); stair3.Set2DFlag(SF_2SECT); stair2.Set2DFlag(SF_NOSECT); } } else //顶层 { stair1.Set2DFlag(SF_NOSECT); stair2.Set2DFlag(SF_NOSECT); stair3.Set2DFlag(SF_NOSECT); } // 设置边梁属性 /*for(int nSide=0; nSide<2; nSide++) { stair1.SetSideBeam(nSide, HasSideBeam(nSide)); stair2.SetSideBeam(nSide, HasSideBeam(nSide)); stair3.SetSideBeam(nSide, HasSideBeam(nSide)); }*/ stair2.SetSideBeam(0, IsInSideBeam()); stair2.SetSideBeam(1, IsInSideBeam()); if(m_nStartSide==OFFSET_MID) { stair1.SetSideBeam(1, IsOutSideBeam()); stair3.SetSideBeam(0, IsOutSideBeam()); stair1.SetSideBeam(0, IsInSideBeam()); stair3.SetSideBeam(1, IsInSideBeam()); } else { stair1.SetSideBeam(0, IsOutSideBeam()); stair3.SetSideBeam(1, IsOutSideBeam()); stair1.SetSideBeam(1, IsInSideBeam()); stair3.SetSideBeam(0, IsInSideBeam()); } ///////////////////////////////////////////////////////////////// //扶手, 考虑了详图画法 double nDistToSide=((GetSpaceWidth()-2*GetStairWidth()-GetMStairWidth())<_DIST_SNAP*2 &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double dStairWidth=0.0; //井宽 dStairWidth = (m_nSpaceWidth - m_nStairWidth*2.0-m_nMStairWidth)/2.0; if(dStairWidth < _DIST_SNAP) { dStairWidth=0.0; } XPoly2D polyRail,polyRail2; //左右内侧扶手 XPoint ptStart,ptStart2; if(m_nStartSide==OFFSET_MID) //中跑上楼 { GetRailFromMid(stair1,stair2,stair3,polyRail,polyRail2,ptStart,ptStart2); } else //边跑上楼 { GetRailFromSide(stair1,stair2,stair3,polyRail,polyRail2,ptStart,ptStart2); } polyRail.SetFlag(0); polyRail2.SetFlag(0); if(m_nStairFlag==SF_TOP) //顶层 { //处理扶手端点 /*XPoint ptA, ptB; ptA = *polyRail.Head(); ads_polar(ptA, m_nRotation+PI/2, m_nStepWidth*0.5, ptB); *polyRail.Head() = ptB; ptA = *polyRail2.Head(); ads_polar(ptA, m_nRotation+PI/2, m_nStepWidth*0.5, ptB); *polyRail2.Head() = ptB;*/ //顶端扶手 XPoly2D polyTopRail(0); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation()));//顶端扶手起点 double nLenSide=nLen1+GetSlabSizeSide(),nLenMid=nLen2+GetSlabSizeMid(); //梯段与平台总长，判断是否齐楼板 //if(nLen2nLen1+_DIST_SNAP && m_nAlignment!=2) if(nLenMid>nLenSide+_DIST_SNAP) { XPoint ptTmp=ptStart; double elev=ptStart.z; ads_polar(ptLoc2, m_nRotation+PI, dStairWidth+nDistToSide, ptStart); ads_polar(ptStart, m_nRotation-PI/2.0, m_nRailDist-m_nRailWidth*0.5, ptStart);//扶手左侧下水平段点 ptStart.z = elev; polyRail.AppendNode(ptStart); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); //扶手右侧下水平段点 ads_polar(ptStart, m_nRotation, m_nMStairWidth+dStairWidth*2.0+nDistToSide*2.0, ptStart); polyRail.AppendNode(ptStart); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); //扶手右侧水平段齐边梯点 ads_polar(ptTmp, m_nRotation, m_nMStairWidth+dStairWidth*2.0+nDistToSide*2.0, ptTmp); polyTopRail.AppendNode(XPoint(ptTmp.x, ptTmp.y, GetElevation())); } else { //顶端扶手终点 ads_polar(ptStart, m_nRotation, m_nMStairWidth+dStairWidth*2.0+nDistToSide*2.0, ptStart); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); } } else { //顶端扶手终点 ads_polar(ptStart, m_nRotation+PI, m_nStairWidth+dStairWidth+nDistToSide, ptStart); polyRail.AppendNode(ptStart); polyTopRail.AppendNode(XPoint(ptStart.x, ptStart.y, GetElevation())); } } if(m_nStartSide==OFFSET_MID) { //合并扶手 for(int i=polyRail2.Length()-1;i>=0;i--) { XPoint pt=*polyRail2[i]; polyRail.AppendNode(pt); } } polyRail.SetFlag(0); rail.SetHas2D(TRUE); rail.SetHas3D(FALSE); if(pRailTop) { pRailTop->SetPathPoly(polyTopRail,GetNormal().AsAcGeVector3d()); pRailTop->SetWidth(m_nRailWidth); pRailTop->SetHeight(m_nRailHeight); pRailTop->SetStyle(TDbHandRail::RS_RAIL1); } if(m_nStartSide != OFFSET_MID) //存在两个顶层扶手 { XPoly2D polyTopRail2(0); polyTopRail2.AppendNode(XPoint(ptStart2.x, ptStart2.y, GetElevation()));//右侧顶端扶手在中梯起点 //if(nLen2SetPathPoly(polyTopRail2,GetNormal().AsAcGeVector3d()); pRailTop2->SetWidth(m_nRailWidth); pRailTop2->SetHeight(m_nRailHeight); pRailTop2->SetStyle(TDbHandRail::RS_RAIL1); } } } else { rail.SetHas2D(TRUE); rail.SetHas3D(TRUE); rail2.SetHas2D(TRUE); rail2.SetHas3D(TRUE); } rail.SetPathPoly(polyRail,GetNormal().AsAcGeVector3d()); rail.SetWidth(m_nRailWidth); rail.SetHeight(m_nRailHeight); rail.SetStyle(TDbHandRail::RS_RAIL1); rail2.SetPathPoly(polyRail2,GetNormal().AsAcGeVector3d()); rail2.SetWidth(m_nRailWidth); rail2.SetHeight(m_nRailHeight); rail2.SetStyle(TDbHandRail::RS_RAIL1); //外侧扶手 double nDist=m_nStartSide==OFFSET_MID?nDistToSide:-nDistToSide; if(pRailOut1!=0) //左边梯外侧扶手 { XPoly2D poly; XLine line=stair1.GetSideCurve2d(m_nStartSide==OFFSET_MID?1:0).Offset(-nDist,0); if(m_nStartSide==OFFSET_MID) GetRailPoly(stair1,line,m_nRailDistMid,m_nRailDist,poly); else { GetRailPoly(stair1,line,m_nStairFlag==SF_TOP?(m_nRailDist>m_nRailWidth?0:m_nRailDist-m_nRailWidth):m_nRailDist,m_nRailDistMid,poly); } pRailOut1->SetPathPoly(poly,GetNormal().AsAcGeVector3d()); pRailOut1->SetWidth(m_nRailWidth); pRailOut1->SetHeight(m_nRailHeight); pRailOut1->SetStyle(TDbHandRail::RS_RAIL1); } if(pRailOut2!=0) //右边梯外侧扶手 { XLine line=stair3.GetSideCurve2d(m_nStartSide==OFFSET_MID?0:1).Offset(nDist,0); XPoly2D poly; if(m_nStartSide==OFFSET_MID) GetRailPoly(stair3,line,m_nRailDistMid,m_nRailDist,poly); else GetRailPoly(stair3,line,m_nStairFlag==SF_TOP?(m_nRailDist>m_nRailWidth?0:m_nRailDist-m_nRailWidth):m_nRailDist,m_nRailDistMid,poly); pRailOut2->SetPathPoly(poly,GetNormal().AsAcGeVector3d()); pRailOut2->SetWidth(m_nRailWidth); pRailOut2->SetHeight(m_nRailHeight); pRailOut2->SetStyle(TDbHandRail::RS_RAIL1); } //休息平台 if(GetSlabSizeSide()>_DIST_SNAP&&GetSlabSizeMid()>_DIST_SNAP&&IsShowSlab()) { XPoly2D polySlab(1); polySlab.AppendNode(ptLowRight); polySlab.AppendNode(ptUpRight, IsArcPlatform()? PI : 0.0); polySlab.AppendNode(ptUpLeft); polySlab.AppendNode(ptLowLeft); //if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment!=0) if(fabs(GetSlabSizeSide()-GetSlabSizeMid())>_DIST_SNAP) { XPoint ptTemp1, ptTemp2,ptTemp3, ptTemp4; if(GetSlabSizeMid()-GetSlabSizeSide()>_DIST_SNAP) { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth+dStairWidth, ptTemp1); ads_polar(ptLowMid, m_nRotation+PI, 0.5*m_nMStairWidth, ptTemp2); ads_polar(ptLowMid, m_nRotation, 0.5*m_nMStairWidth, ptTemp3); ads_polar(ptLowRight, m_nRotation+PI, m_nStairWidth+dStairWidth, ptTemp4); } else { ads_polar(ptLowLeft, m_nRotation, m_nStairWidth, ptTemp1); ads_polar(ptLowMid, m_nRotation+PI, m_nSpaceWidth*0.5-m_nStairWidth, ptTemp2); ads_polar(ptLowMid, m_nRotation, m_nSpaceWidth*0.5-m_nStairWidth, ptTemp3); ads_polar(ptLowRight, m_nRotation+PI, m_nStairWidth, ptTemp4); } polySlab.AppendNode(ptTemp1); polySlab.AppendNode(ptTemp2); polySlab.AppendNode(ptTemp3); polySlab.AppendNode(ptTemp4); } if(polySlab.PathArea()>0) polySlab.Reverse(); slab.SetOutline(polySlab); if(m_nStartSide==OFFSET_MID) slab.SetElevation(ptLoc1.z); else slab.SetElevation(ptLoc2.z); slab.SetThickness(-m_nSlabThick); } stair1.setPropertiesFrom(this); stair2.setPropertiesFrom(this); stair3.setPropertiesFrom(this); stair1.SetBeamHeight(GetBeamHeight()); stair2.SetBeamHeight(GetBeamHeight()); stair3.SetBeamHeight(GetBeamHeight()); stair1.SetBeamThick(GetBeamThick()); stair2.SetBeamThick(GetBeamThick()); stair3.SetBeamThick(GetBeamThick()); slab.setPropertiesFrom(this); rail.setPropertiesFrom(this); rail2.setPropertiesFrom(this); if(pRailTop!=NULL) pRailTop->setPropertiesFrom(this); if(pRailTop2!=NULL) pRailTop2->setPropertiesFrom(this); if(pRailOut1!=NULL) pRailOut1->setPropertiesFrom(this); if(pRailOut2!=NULL) pRailOut2->setPropertiesFrom(this); if(m_idLayerStep3d.isValid()) { slab.setLayer(m_idLayerStep3d); stair1.SetLayerStep3d(m_idLayerStep3d); stair2.SetLayerStep3d(m_idLayerStep3d); stair3.SetLayerStep3d(m_idLayerStep3d); } if(m_idLayerBeam3d.isValid()) { stair1.SetLayerBeam3d(m_idLayerBeam3d); stair2.SetLayerBeam3d(m_idLayerBeam3d); stair3.SetLayerBeam3d(m_idLayerBeam3d); } if(m_idLayerHand3d.isValid()) { rail.setLayer(m_idLayerHand3d); rail2.setLayer(m_idLayerHand3d); if(pRailTop!=NULL) pRailTop->setLayer(m_idLayerHand3d); if(pRailTop2!=NULL) pRailTop2->setLayer(m_idLayerHand3d); if(pRailOut1!=NULL) pRailOut1->setLayer(m_idLayerHand3d); if(pRailOut2!=NULL) pRailOut2->setLayer(m_idLayerHand3d); } return Acad::eOk; } void TDbParallelStair::GetRailPoly(TDbLineStair &stair1,XLine line,double lengthS,double lengthE,XPoly2D &poly)const { XPoint ptTemp; if(lengthS > m_nStepWidth*0.5 + _DIST_SNAP) //扶手伸出 { ads_polar(XPoint(line.StartPoint()),stair1.GetRotation()-PI/2,lengthS,ptTemp); ptTemp.z=stair1.GetLocation().z; poly.AppendNode(ptTemp); //扶手伸出点 ads_polar(XPoint(line.StartPoint()),stair1.GetRotation()-PI/2,m_nStepWidth*0.5,ptTemp); ptTemp.z=stair1.GetLocation().z; poly.AppendNode(ptTemp); //扶手拐点 } else //扶手缩回 { ads_polar(XPoint(line.StartPoint()),stair1.GetRotation()-PI/2,lengthS,ptTemp); double elev=0,length=0; length=stair1.GetStairLength()+m_nStepWidth; elev=lengthS/length*stair1.GetStairHeight(); ptTemp.z =stair1.GetLocation().z+m_nStepHeight*0.5-elev;; poly.AppendNode(ptTemp); //扶手缩回点 } if(lengthE > m_nStepWidth*0.5 + _DIST_SNAP) //扶手伸出 { ads_polar(XPoint(line.EndPoint()),stair1.GetRotation()+PI/2,m_nStepWidth*0.5,ptTemp); ptTemp.z = stair1.GetLocation().z+stair1.GetStairHeight(); poly.AppendNode(ptTemp); //拐点 ads_polar(XPoint(ptTemp),stair1.GetRotation()+PI/2,lengthE-m_nStepWidth*0.5,ptTemp); poly.AppendNode(ptTemp); //伸出点 } else //扶手回缩 { ptTemp=line.EndPoint(); ads_polar(XPoint(ptTemp),stair1.GetRotation()+PI/2,lengthE,ptTemp); double elev=0,length=0; length=stair1.GetStairLength()+m_nStepWidth; elev=lengthE/length*stair1.GetStairHeight(); ptTemp.z = stair1.GetLocation().z+stair1.GetStairHeight()-m_nStepHeight*0.5+elev; poly.AppendNode(ptTemp); } } void TDbParallelStair::GetDefaultArrow(TDbLineStair &stair1,TDbLineStair &stair2,TDbLineStair &stair3, TDbSymbArrow*pArrowUp1,TDbSymbArrow*pArrowUp2, TDbSymbArrow*pArrowDown1,TDbSymbArrow*pArrowDown2)const { assertReadEnabled(); int nSectStair=GetSectStairPos(); if(m_nStairFlag != SF_TOP && nSectStair == -1)//剖断位置不正确 return; int nSectStepNum=m_nSectStepNum; //剖断步数 if(nSectStepNum < 0) //负数调整为正的 { nSectStepNum=m_nSectStepNum+m_nStepNum1+m_nStepNum2+1; } if((nSectStair==0&&m_nStartSide!=SF_MIDDLE&&nSectStepNum==m_nStepNum1) ||(nSectStair==1&&m_nStartSide==SF_MIDDLE&&nSectStepNum==m_nStepNum2) ||nSectStepNum==m_nStepNum1+m_nStepNum2) { nSectStepNum--; } double nSlabSize=min(GetSlabSizeSide(),GetSlabSizeMid()); if(nSlabSize<_AS_SYS_UNIT(10)&&!IsArcPlatform()) nSlabSize=-_AS_SYS_UNIT(1200); else if(IsArcPlatform()) nSlabSize=-_AS_SYS_UNIT(1200); XPoint pt1,pt2,pt3,pt4,pt5,pt6,pt7,pt8,pt9,pt10,pt11,pt12,pt; /*----------点相对位置示意---------------------- _________________________________________________ *pt4 | *pt5 | *pt12 | | | | *pt3 | *pt6 | *pt11 *pt2 | *pt7 | *pt10 | | | | *pt1 | *pt8 | *pt9 ------------------------------------------------*/ ads_polar(stair1.GetLocation(),stair1.GetRotation(),stair1.GetStairWidth()/2,pt); if(m_nStartSide==OFFSET_MID) //中跑起步 { ads_polar(pt,stair1.GetRotation()+PI/2,(stair1.GetStairLength()+m_nStepWidth*0.5),pt1); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-m_nStepNum2)),pt2); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-m_nStepNum2-1)),pt3); ads_polar(stair2.GetLocation(),stair2.GetRotation(),stair2.GetStairWidth()*0.5,pt); ads_polar(pt,stair2.GetRotation()-PI/2,m_nStepWidth/2,pt8); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-1)),pt7); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*nSectStepNum),pt6); ads_polar(stair3.GetLocation(),stair3.GetRotation(),stair3.GetStairWidth()*0.5,pt); ads_polar(pt,stair3.GetRotation()+PI/2,(stair3.GetStairLength()+m_nStepWidth*0.5),pt9); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-m_nStepNum2)),pt10); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-m_nStepNum2-1)),pt11); } else //边跑起步 { ads_polar(pt,stair1.GetRotation()-PI/2,m_nStepWidth*0.5,pt1); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-1)),pt2); ads_polar(pt,stair1.GetRotation()+PI/2,(m_nStepWidth*nSectStepNum),pt3); ads_polar(stair2.GetLocation(),stair2.GetRotation(),stair2.GetStairWidth()*0.5,pt); ads_polar(pt,stair2.GetRotation()+PI/2,stair2.GetStairLength()+m_nStepWidth*0.5,pt8); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-m_nStepNum1)),pt7); ads_polar(pt,stair2.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-m_nStepNum1-1)),pt6); ads_polar(stair3.GetLocation(),stair3.GetRotation(),stair3.GetStairWidth()*0.5,pt); ads_polar(pt,stair3.GetRotation()-PI/2,m_nStepWidth*0.5,pt9); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*(nSectStepNum-1)),pt10); ads_polar(pt,stair3.GetRotation()+PI/2,(m_nStepWidth*nSectStepNum),pt11); } ads_polar(GetUpLeft2d(),GetRotation()-PI/2,nSlabSize*0.5,pt); ads_polar(pt,GetRotation(),GetStairWidth()*0.5,pt4); ads_polar(pt,GetRotation(),GetSpaceWidth()*0.5,pt5); ads_polar(pt,GetRotation(),GetSpaceWidth()-GetStairWidth()*0.5,pt12); if(m_nStairFlag==SF_TOP) //顶层 { XPoly2D poly1; XPoly2D poly2; if(m_nStartSide==OFFSET_MID) //中梯起跑 { poly1.AppendNode(pt1); poly1.AppendNode(pt4); poly1.AppendNode(pt5); ads_polar(pt8,m_nRotation+PI/2,m_nStepWidth,pt8); poly1.AppendNode(pt8); poly2.AppendNode(pt9); poly2.AppendNode(pt12); poly2.AppendNode(pt5); poly2.AppendNode(pt8); } else //边梯起跑 { poly1.AppendNode(pt8); poly1.AppendNode(pt5); poly1.AppendNode(pt4); ads_polar(pt1,m_nRotation+PI/2,m_nStepWidth,pt1); poly1.AppendNode(pt1); poly2.AppendNode(pt8); poly2.AppendNode(pt5); poly2.AppendNode(pt12); ads_polar(pt9,m_nRotation+PI/2,m_nStepWidth,pt9); poly2.AppendNode(pt9); } poly1.SetElevation(GetElevation()); poly2.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly1); pArrowDown2->SetPoly2D(poly2); } else //首层和中间层 { XPoly2D poly,poly3; if(m_nStartSide==OFFSET_MID) //中跑上楼 { if(nSectStair==0) //中梯剖断 { poly.AppendNode(pt8); poly.AppendNode(pt7); poly.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly); if(m_nStairFlag == SF_MIDDLE) //中间层 { poly3.AppendNode(pt1); poly3.AppendNode(pt4); poly3.AppendNode(pt5); poly3.AppendNode(pt6); poly3.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); XPoly2D poly4; poly4.AppendNode(pt9); poly4.AppendNode(pt12); poly4.AppendNode(pt5); poly4.AppendNode(pt6); poly4.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly4); } } else if(nSectStair==1) //边梯剖断 { poly.AppendNode(pt8); poly.AppendNode(pt5); poly.AppendNode(pt4); poly.AppendNode(pt3); poly.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly); XPoly2D poly2; poly2.AppendNode(pt8); poly2.AppendNode(pt5); poly2.AppendNode(pt12); poly2.AppendNode(pt11); poly2.SetElevation(GetElevation()); pArrowUp2->SetPoly2D(poly2); if(m_nStairFlag == SF_MIDDLE) //中间层 { poly3.AppendNode(pt1); poly3.AppendNode(pt2); poly3.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); XPoly2D poly4; poly4.AppendNode(pt9); poly4.AppendNode(pt10); poly4.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly4); } } } else //边跑上楼 { if(nSectStair==0) //中梯剖断 { poly.AppendNode(pt1); poly.AppendNode(pt4); poly.AppendNode(pt5); poly.AppendNode(pt6); poly.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly); XPoly2D poly2; poly2.AppendNode(pt9); poly2.AppendNode(pt12); poly2.AppendNode(pt5); poly2.AppendNode(pt6); poly2.SetElevation(GetElevation()); pArrowUp2->SetPoly2D(poly2); if(m_nStairFlag == SF_MIDDLE) //中间层 { poly3.AppendNode(pt8); poly3.AppendNode(pt7); poly3.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); } } else if(nSectStair==1) //边梯剖断 { poly.AppendNode(pt1); poly.AppendNode(pt2); poly.SetElevation(GetElevation()); pArrowUp1->SetPoly2D(poly); XPoly2D poly4; poly4.AppendNode(pt9); poly4.AppendNode(pt10); poly4.SetElevation(GetElevation()); pArrowUp2->SetPoly2D(poly4); if(m_nStairFlag == SF_MIDDLE) //中间层 { poly3.AppendNode(pt8); poly3.AppendNode(pt5); poly3.AppendNode(pt4); poly3.AppendNode(pt3); poly3.SetElevation(GetElevation()); pArrowDown1->SetPoly2D(poly3); XPoly2D poly2; poly2.AppendNode(pt8); poly2.AppendNode(pt5); poly2.AppendNode(pt12); poly2.AppendNode(pt11); poly2.SetElevation(GetElevation()); pArrowDown2->SetPoly2D(poly2); } } } } { pArrowUp1->setPropertiesFrom(this); //add by xlc on 090212 pArrowUp1->SetTextHeight(m_dTextHeight); //modify by xlc on 090205 //pArrowUp1->SetLayoutRotation(Ucs2Wcs(0)); pArrowUp1->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowUp1->SetText(_T("上")); pArrowUp1->SetText(GetTextUp()); pArrowUp1->SetTextAlign(TDbSymbArrow::kAtSide); pArrowUp1->SetTextLocation(pArrowUp1->GetDefaultTextLocation()); pArrowUp1->SetTextLayerId(m_idLayerText); pArrowUp1->SetTextStyleId(m_idTextStyle); pArrowUp2->setPropertiesFrom(this); //add by xlc on 090212 pArrowUp2->SetTextHeight(m_dTextHeight); pArrowUp2->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowUp2->SetText(_T("上")); pArrowUp2->SetText(GetTextUp()); pArrowUp2->SetTextAlign(TDbSymbArrow::kAtSide); pArrowUp2->SetTextLocation(pArrowUp2->GetDefaultTextLocation()); pArrowUp2->SetTextLayerId(m_idLayerText); pArrowUp2->SetTextStyleId(m_idTextStyle); pArrowDown1->setPropertiesFrom(this); //add by xlc on 090212 pArrowDown1->SetTextHeight(m_dTextHeight); pArrowDown1->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowDown1->SetText(_T("下")); pArrowDown1->SetText(GetTextDown()); pArrowDown1->SetTextAlign(TDbSymbArrow::kAtSide); pArrowDown1->SetTextLocation(pArrowDown1->GetDefaultTextLocation()); pArrowDown1->SetTextLayerId(m_idLayerText); pArrowDown1->SetTextStyleId(m_idTextStyle); pArrowDown2->setPropertiesFrom(this); //add by xlc on 090212 pArrowDown2->SetTextHeight(m_dTextHeight); pArrowDown2->SetLayoutRotation(GetLayoutRotation()); //modify by xlc on 090426 //pArrowDown2->SetText(_T("下")); pArrowDown2->SetText(GetTextDown()); pArrowDown2->SetTextAlign(TDbSymbArrow::kAtSide); pArrowDown2->SetTextLocation(pArrowDown2->GetDefaultTextLocation()); pArrowDown2->SetTextLayerId(m_idLayerText); pArrowDown2->SetTextStyleId(m_idTextStyle); if(m_idLayerArrow.isValid()) { pArrowUp1->setLayer(m_idLayerArrow); pArrowUp2->setLayer(m_idLayerArrow); pArrowDown1->setLayer(m_idLayerArrow); pArrowDown2->setLayer(m_idLayerArrow); } } } //add by xlc on 090122 获得梯段扶手线的位置 void TDbParallelStair::GetRailPolyFromStair(TDbLineStair &stair, //[in]操作梯段 double dOffset, //[in]偏移距离 double dDistS, //[in]起始端伸出距离 double dDistE, //[in]终端伸出距离 BOOL bRight, //[in]扶手侧 XPoly2D &poly //[out]扶手线 )const { poly.Reset(); XLine line=stair.GetSideCurve2d(bRight).Offset(dOffset,0); XPoint pt=line.StartPoint(); pt.z=stair.GetElevation()+0.5*m_nStepHeight; if(dDistS<-0.5*m_nStepWidth+_DIST_SNAP) { int num=(int)fabs((dDistS-0.5*m_nStepWidth)/m_nStepWidth); ads_polar(pt, stair.GetRotation()+PI/2,m_nStepWidth*num, pt); pt.z+=m_nStepHeight*num; } poly.AppendNode(pt); pt=line.EndPoint(); pt.z=stair.GetElevation()+stair.GetStairHeight()-0.5*m_nStepHeight; if(dDistE<-0.5*m_nStepWidth+_DIST_SNAP) { int num=(int)fabs((dDistE-0.5*m_nStepWidth)/m_nStepWidth); ads_polar(pt, stair.GetRotation()-PI/2,m_nStepWidth*num, pt); pt.z-=m_nStepHeight*num; } poly.AppendNode(pt); } void TDbParallelStair::DrawRail(XPoly2D polyPath,double nStepWidth,XExplodeDraw &dc) const { double nTotalDist=polyPath.Distance2d(); int nRailNum=AS_INT(nTotalDist/nStepWidth); if(nRailNum<1) nRailNum=1; double nStepW=nTotalDist/nRailNum; double nRailHeight=m_nRailHeight-_AS_SYS_UNIT(20); if(m_nRailDistToSide < -_DIST_SNAP)//扶手偏移距离为负时栏杆增加一个踏步高 nRailHeight += m_nStepHeight; for(int iRail=0; iRailz -= m_nStepHeight; } } dc.DrawMesh(poly2d, XVector3D(0,0,nRailHeight)); } } Acad::ErrorStatus TDbParallelStair::ExplodeOrDraw3d(XExplodeDraw &dc) const { if(m_nViewCtrl==1) return Acad::eOk; //三维被禁止 assertReadEnabled(); TDbLineStair stair1, stair2, stair3; TDbSlab slab; TDbHandRail rail, rail2, railTop, railTop2,railOut1,railOut2; ExplodeTo(stair1, stair2, stair3, slab, rail, rail2, &railTop, &railTop2,&railOut1,&railOut2); if(m_nStairFlag==SF_TOP) { { TPushProperty vProp(&railTop, dc); if(dc.IsFullExplode()) railTop.ExplodeOrDraw3d(dc); else dc.DrawEntity(railTop); } if(m_nStartSide != OFFSET_MID) { TPushProperty vProp(&railTop2, dc); if(dc.IsFullExplode()) railTop2.ExplodeOrDraw3d(dc); else dc.DrawEntity(railTop2); } // 内侧栏杆 if(IsAutoRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=railTop.GetOutline(); DrawRail(polyPath,m_nStepWidth,dc); if(m_nStartSide != OFFSET_MID)//顶层右边栏杆 { XPoly2D polyPath=railTop2.GetOutline(); DrawRail(polyPath,m_nStepWidth,dc); } } } else { //左边梯段 { TPushProperty vProp(&stair1, dc); if(dc.IsFullExplode()) stair1.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair1); } //中间梯段 { TPushProperty vProp(&stair2, dc); if(dc.IsFullExplode()) stair2.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair2); } //右边梯段 { TPushProperty vProp(&stair3, dc); if(dc.IsFullExplode()) stair3.ExplodeOrDraw3d(dc); else dc.DrawEntity(stair3); } //休息平台 if(GetSlabSizeSide()>_DIST_SNAP&&GetSlabSizeMid()>_DIST_SNAP&&IsShowSlab()) { TPushProperty vProp(&slab, dc); if(dc.IsFullExplode()) slab.ExplodeOrDraw3d(dc); else dc.DrawEntity(slab); } { //外侧扶手 if(IsOutRail()) { if(dc.IsFullExplode()) { railOut1.ExplodeOrDraw3d(dc); railOut2.ExplodeOrDraw3d(dc); } else { dc.DrawEntity(railOut1); dc.DrawEntity(railOut2); } // 外侧栏杆 if(IsAutoOutRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=railOut1.GetOutline(); //modify by xlc on 090122 修改栏杆画法，不作为坡道时，只在踏步中间画 double nDistToSide=((GetSpaceWidth()-2*GetStairWidth()-GetMStairWidth())<_DIST_SNAP*2&&m_nRailDistToSide<0) ? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; double nDist=m_nStartSide==OFFSET_MID?nDistToSide:-nDistToSide; if(m_nStartSide==OFFSET_MID) { GetRailPolyFromStair(stair1,-nDist,0,m_nRailDist,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); polyPath=railOut2.GetOutline(); GetRailPolyFromStair(stair3,nDist,0,m_nRailDist,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } else { GetRailPolyFromStair(stair1,-nDist,m_nRailDist,0,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); polyPath=railOut2.GetOutline(); GetRailPolyFromStair(stair3,nDist,m_nRailDist,0,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } } } //内侧扶手 extern BOOL g_bInElevProcess; TPushProperty vProp(&rail, dc); if(g_bInElevProcess) { XPoly2D polyPath; AcGeVector3d normal; rail.GetPathPoly(polyPath,normal); for(int mm=0; mm_DIST_SNAP) { XPoly2D poly3d(0); poly3d.AppendNode(cv.StartPoint(), cv.GetBulge()); poly3d.AppendNode(cv.EndPoint()); rail.SetPathPoly(poly3d,normal); if(dc.IsFullExplode()) rail.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail); } } rail.SetPathPoly(polyPath,normal); } else { if(dc.IsFullExplode()) rail.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail); } TPushProperty vProp2(&rail2, dc); if(g_bInElevProcess) { XPoly2D polyPath; AcGeVector3d normal; rail2.GetPathPoly(polyPath,normal); for(int mm=0; mm_DIST_SNAP) { XPoly2D poly3d(0); poly3d.AppendNode(cv.StartPoint(), cv.GetBulge()); poly3d.AppendNode(cv.EndPoint()); rail2.SetPathPoly(poly3d,normal); if(dc.IsFullExplode()) rail2.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail2); } } rail2.SetPathPoly(polyPath,normal); } else { if(dc.IsFullExplode()) rail2.ExplodeOrDraw3d(dc); else dc.DrawEntity(rail2); } } // 内侧栏杆 if(IsAutoRail()) { dc.SetColorLayer(colorIndex(), m_idLayerRail3d); XPoly2D polyPath=rail.GetOutline(); //modify by xlc on 090122 修改栏杆画法，不作为坡道时，只在踏步中间画 // DrawRail(polyPath,m_nStepWidth,dc); // // polyPath=rail2.GetOutline(); // DrawRail(polyPath,m_nStepWidth,dc); double nDistToSide=((GetSpaceWidth()-2*GetStairWidth()-GetMStairWidth())<_DIST_SNAP*2 &&m_nRailDistToSide<0)? _AS_SYS_UNIT(0) : m_nRailDistToSide; nDistToSide += m_nRailWidth/2; if(m_nStartSide==OFFSET_MID) { GetRailPolyFromStair(stair2,nDistToSide,m_nRailDist,0,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair2,-nDistToSide,m_nRailDist,0,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair1,nDistToSide,0,m_nRailDist,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); polyPath=railOut2.GetOutline(); GetRailPolyFromStair(stair3,-nDistToSide,0,m_nRailDist,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } else { GetRailPolyFromStair(stair2,nDistToSide,0,m_nRailDist,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair2,-nDistToSide,0,m_nRailDist,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); GetRailPolyFromStair(stair1,-nDistToSide,m_nRailDist,0,1,polyPath); DrawRail(polyPath,m_nStepWidth,dc); polyPath=railOut2.GetOutline(); GetRailPolyFromStair(stair3,nDistToSide,m_nRailDist,0,0,polyPath); DrawRail(polyPath,m_nStepWidth,dc); } } } return Acad::eOk; } bool TDbParallelStair::IsClipMe(const TEntityBase* pEnt)const { if(TDbEntity::IsClipMe(pEnt)) return true; if(pEnt->GetMe()->isKindOf(TDbColumn::desc())) return true; return false; } Acad::ErrorStatus TDbParallelStair::ExplodeOrDraw2d(XExplodeDraw &dc) const { if(m_nViewCtrl==2) return Acad::eOk; //二维被禁止 assertReadEnabled(); CString s1=dc.Desc(),s2=XAcGiViewDraw::Descriptor(); if(_tcscmp(dc.Desc(), XAcGiViewDraw::Descriptor())==0 || g_bOsnapExpl) { XPushMemVar bExpl(g_bOsnapExpl, FALSE); XPushMemVar bFull(XExplodeStream::m_bFullExplode, TRUE); AcDbVoidPtrArray entSet; XExplodeStream dcExp(entSet); dcExp.SetPropertiesFrom(this); ExplodeOrDraw2d(dcExp); INT_PTR nQuickMarker=GetQuickMarker(); int nGsMarker=1; int nCount=entSet.length(); for(int i=0; i_DIST_SNAP&&GetSlabSizeMid()>_DIST_SNAP) { if(IsShowSlab()) { slab.AddTempRail(&rail); if(!(m_nStairFlag == SF_TOP&&m_nStartSide==OFFSET_MID)) { slab.AddTempRail(&rail2); } if(IsOutRail()) { slab.AddTempRail(&railOut1); slab.AddTempRail(&railOut2); } if(dc.IsFullExplode()) slab.ExplodeOrDraw2d(dc); else dc.DrawEntity(slab); } } else if(m_nSpaceWidth-2*m_nStairWidth-m_nMStairWidth>_DIST_SNAP) { //绘制平台线 XPoint ptFromL=m_nStartSide==OFFSET_MID? stair2.GetUpLeft2d() : stair2.GetLowRight2d(); XPoint ptToL=m_nStartSide==OFFSET_MID? stair1.GetLowLeft2d() : stair1.GetUpRight2d(); XPoint ptFromR=m_nStartSide==OFFSET_MID? stair2.GetUpRight2d() : stair2.GetLowLeft2d(); XPoint ptToR=m_nStartSide==OFFSET_MID? stair3.GetLowRight2d() : stair3.GetUpLeft2d(); //if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment!=0) if(fabs(GetSlabSizeSide()-GetSlabSizeMid())>_DIST_SNAP) { double nIdent=GetSlabSizeSide()-GetSlabSizeMid(); XPoint ptTempL,ptTempR; if(nIdent>0) { ads_polar(ptToL, m_nRotation+PI/2, nIdent, ptTempL); ads_polar(ptToR, m_nRotation+PI/2, nIdent, ptTempR); } else { ads_polar(ptFromL, m_nRotation+PI/2, fabs(nIdent), ptTempL); ads_polar(ptFromR, m_nRotation+PI/2, fabs(nIdent), ptTempR); } dc << XLine(ptFromL, ptTempL) << XLine(ptTempL, ptToL) << XLine(ptFromR, ptTempR) << XLine(ptTempR, ptToR); } else { dc << XLine(ptFromL, ptToL)<< XLine(ptFromR, ptToR); } } // 绘制楼板线 if(m_nStairFlag!=SF_FIRST) { XPoint ptFromL=m_nStartSide==OFFSET_MID? stair2.GetLowLeft2d() : stair2.GetUpRight2d(); XPoint ptToL=m_nStartSide==OFFSET_MID? stair1.GetUpLeft2d() : stair1.GetLowRight2d(); XPoint ptFromR=m_nStartSide==OFFSET_MID? stair2.GetLowRight2d() : stair2.GetUpLeft2d(); XPoint ptToR=m_nStartSide==OFFSET_MID? stair3.GetUpRight2d() : stair3.GetLowLeft2d(); //if(fabs(nLen1-nLen2)>_DIST_SNAP && m_nAlignment!=2) if(fabs(nLenSide-nLenMid)>_DIST_SNAP) { double nIdent=nLenMid-nLenSide; XPoint ptTempL,ptTempR; if(nIdent>0)//中梯长 { ads_polar(ptToL, m_nRotation-PI/2, nIdent, ptTempL); ads_polar(ptToR, m_nRotation-PI/2, nIdent, ptTempR); if((m_nRailDistToSide>=0&&m_nRailDist>m_nRailWidth) ||(m_nRailDistToSide<=-m_nRailWidth&&m_nRailDist<0) ||m_nRailDist<-nIdent) //楼板线不被遮挡 { dc << XLine(ptFromL, ptTempL)<< XLine(ptFromR, ptTempR); if(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDistToSide<=-m_nRailWidth&&m_nRailDist<0&&m_nRailDist>-fabs(nIdent)) { XPoint ptTmpL,ptTmpR; ads_polar(ptTempL, m_nRotation-PI/2, m_nRailDist, ptTmpL); ads_polar(ptTempR, m_nRotation-PI/2, m_nRailDist, ptTmpR); dc << XLine(ptTempL, ptTmpL)<< XLine(ptTempR, ptTmpR); ads_polar(ptTempL, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpL); ads_polar(ptTempR, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpR); dc << XLine(ptTmpL, ptToL)<< XLine(ptTmpR, ptToR); } else { dc << XLine(ptTempL, ptToL) << XLine(ptTempR, ptToR) ; } } else if(m_nRailDistToSide>=0&&m_nRailDist<=m_nRailWidth) { XPoint ptL,ptR; ads_polar(ptToL, m_nRotation-PI/2, nIdent+m_nRailDist-m_nRailWidth, ptL); ads_polar(ptToR, m_nRotation-PI/2, nIdent+m_nRailDist-m_nRailWidth, ptR); dc<=0)//楼板线被扶手线打断 { if(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDist<=m_nRailWidth) { XPoint ptTmpL,ptTmpR; ads_polar(ptTempL, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpL); ads_polar(ptTempR, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpR); dc << XLine(ptTmpL, ptToL)<< XLine(ptTmpR, ptToR); } else { dc << XLine(ptTempL, ptToL)<< XLine(ptTempR, ptToR); } XPoint ptL,ptR; ads_polar(ptFromL, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptL); if(!(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptFromL, ptL); } ads_polar(ptTempL, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptR); if(!(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptTempL, ptR); } if(m_nRailDist>m_nRailWidth) { ads_polar(ptL, m_nRotation+PI, m_nRailWidth, ptL); ads_polar(ptR, m_nRotation, m_nRailWidth, ptR); dc << XLine(ptL, ptR); } ads_polar(ptFromR, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptL); if(!(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptFromR, ptL); } ads_polar(ptTempR, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptR); if(!(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptTempR, ptR); } if(m_nRailDist>m_nRailWidth) { ads_polar(ptL, m_nRotation, m_nRailWidth, ptL); ads_polar(ptR, m_nRotation+PI, m_nRailWidth, ptR); dc << XLine(ptL, ptR); } } else if(m_nRailDistToSide<=0&&m_nRailDistToSide>-m_nRailWidth)//楼板线两端被扶手遮挡 { if(m_nRailDist>=m_nRailWidth||m_nRailDist<=0) { XPoint ptL,ptR; if(m_nRailDist<=0) { dc<=0&&m_nRailDist>m_nRailWidth) ||(m_nRailDistToSide<=-m_nRailWidth&&m_nRailDist<0) ||m_nRailDist<-fabs(nIdent)) //楼板线不被遮挡 { dc<< XLine(ptTempL, ptToL) << XLine(ptTempR, ptToR); if(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDistToSide<=-m_nRailWidth&&m_nRailDist<0&&m_nRailDist>-fabs(nIdent)) { XPoint ptTmpL,ptTmpR; ads_polar(ptTempL, m_nRotation-PI/2, m_nRailDist, ptTmpL); ads_polar(ptTempR, m_nRotation-PI/2, m_nRailDist, ptTmpR); dc << XLine(ptTempL, ptTmpL)<< XLine(ptTempR, ptTmpR); ads_polar(ptTempL, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpL); ads_polar(ptTempR, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpR); dc << XLine(ptTmpL, ptFromL)<< XLine(ptTmpR, ptFromR); } else { dc << XLine(ptFromL, ptTempL) << XLine(ptFromR, ptTempR); } } else if(m_nRailDistToSide>=0&&m_nRailDist<=m_nRailWidth) { XPoint ptL,ptR; ads_polar(ptFromL, m_nRotation-PI/2, -nIdent+m_nRailDist-m_nRailWidth, ptL); ads_polar(ptFromR, m_nRotation-PI/2, -nIdent+m_nRailDist-m_nRailWidth, ptR); dc<=0)//楼板线被扶手线打断 { if(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDist<=m_nRailWidth) { XPoint ptTmpL,ptTmpR; ads_polar(ptTempL, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpL); ads_polar(ptTempR, m_nRotation-PI/2, m_nRailDist-m_nRailWidth, ptTmpR); dc << XLine(ptTmpL, ptFromL)<< XLine(ptTmpR, ptFromR); } else { dc << XLine(ptTempL, ptFromL)<< XLine(ptTempR, ptFromR); } XPoint ptL,ptR; ads_polar(ptToL, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptL); if(!(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptToL, ptL); } ads_polar(ptTempL, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptR); if(!(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptTempL, ptR); } if(m_nRailDist>m_nRailWidth) { ads_polar(ptL, m_nRotation, m_nRailWidth, ptL); ads_polar(ptR, m_nRotation+PI, m_nRailWidth, ptR); dc << XLine(ptL, ptR); } ads_polar(ptToR, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptL); if(!(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptToR, ptL); } ads_polar(ptTempR, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptR); if(!(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptTempR, ptR); } if(m_nRailDist>m_nRailWidth) { ads_polar(ptL, m_nRotation+PI, m_nRailWidth, ptL); ads_polar(ptR, m_nRotation, m_nRailWidth, ptR); dc << XLine(ptL, ptR); } } else if(m_nRailDistToSide<=0&&m_nRailDistToSide>=-m_nRailWidth)//楼板线两端被扶手遮挡 { if(m_nRailDist>=m_nRailWidth||m_nRailDist<=0) { XPoint ptL,ptR; if(m_nRailDist<=0) { dc << XLine(ptToL, ptTempL)<m_nRailWidth&&m_nRailDistToSide>=0))//楼板线不被扶手遮挡 { dc << XLine(ptFromL, ptToL)<< XLine(ptFromR, ptToR); } else if(m_nRailDist>=0&&m_nRailDistToSide<=-m_nRailWidth)//楼板线被扶手打断 { XPoint ptL,ptR; ads_polar(ptFromL, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptL); if(!(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptFromL, ptL); } ads_polar(ptToL, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptR); if(!(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptToL, ptR); } if(m_nRailDist>m_nRailWidth) { ads_polar(ptL, m_nRotation+PI, m_nRailWidth, ptL); ads_polar(ptR, m_nRotation, m_nRailWidth, ptR); dc << XLine(ptL, ptR); } ads_polar(ptFromR, m_nRotation, fabs(m_nRailDistToSide+m_nRailWidth), ptL); if(!(m_nStairFlag==SF_TOP&&m_nStartSide==OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptFromR, ptL); } ads_polar(ptToR, m_nRotation, m_nRailDistToSide+m_nRailWidth, ptR); if(!(m_nStairFlag==SF_TOP&&m_nStartSide!=OFFSET_MID&&m_nRailDist<=m_nRailWidth)) { dc << XLine(ptToR, ptR); } if(m_nRailDist>m_nRailWidth) { ads_polar(ptL, m_nRotation, m_nRailWidth, ptL); ads_polar(ptR, m_nRotation+PI, m_nRailWidth, ptR); dc << XLine(ptL, ptR); } } else if(m_nRailDist>m_nRailWidth&&m_nRailDistToSide>=-m_nRailWidth&&m_nRailDistToSide<=0)//楼板线两端被扶手遮挡 { XPoint ptL,ptR; ads_polar(ptFromL, m_nRotation+PI, fabs(m_nRailDistToSide), ptL); ads_polar(ptToL, m_nRotation, fabs(m_nRailDistToSide), ptR); dc << XLine(ptL, ptR); ads_polar(ptFromR, m_nRotation, fabs(m_nRailDistToSide), ptL); ads_polar(ptToR, m_nRotation+PI, fabs(m_nRailDistToSide), ptR); dc << XLine(ptL, ptR); } } } } } return Acad::eOk; } // From TDbPolyPathEnt Acad::ErrorStatus TDbParallelStair::GetPathPoly(XPoly2D &polyPath,AcGeVector3d&normal) const { assertReadEnabled(); TDbLineStair stair1, stair2,stair3; TDbSlab slab; TDbHandRail rail, rail2, railTop,railTop2; ExplodeTo(stair1, stair2, stair3, slab, rail, rail2, &railTop,&railTop2); if(m_nStairFlag==SF_TOP) railTop.GetBindPath(polyPath,normal); else rail.GetBindPath(polyPath,normal); return Acad::eOk; } Acad::ErrorStatus TDbParallelStair::SetPathPoly(const XPoly2D &polyPath,const AcGeVector3d&normal) { return Acad::eNotApplicable; } BOOL TDbParallelStair::CalSectPos(double &lSectPos,double &rSectPos,XPoint &ptLeft2d,XPoint &ptRight2d)const { if(m_nStairFlag == SF_TOP) return FALSE; int nSectStair=GetSectStairPos(); if(nSectStair == -1) //剖断位置不正确 return FALSE; TDbLineStair stair1, stair2, stair3; TDbSlab slab; TDbHandRail rail, rail2, railTop,railTop2; ExplodeTo(stair1, stair2, stair3, slab, rail, rail2, &railTop,&railTop2); XDirectionCurve cvLeft1,cvRight1; double width=0; //剖断楼梯宽 double len=0; //剖断位置距楼梯起始点的距离 double length=0; //剖切梯段楼梯总长 int nSectStepNum=m_nSectStepNum; //剖断步数 if(nSectStepNum < 0) //负数调整为正的 { nSectStepNum=m_nSectStepNum+m_nStepNum1+m_nStepNum2+1; } if((nSectStair==0&&m_nStartSide!=SF_MIDDLE&&nSectStepNum==m_nStepNum1) ||(nSectStair==1&&m_nStartSide==SF_MIDDLE&&nSectStepNum==m_nStepNum2) ||nSectStepNum==m_nStepNum1+m_nStepNum2) { nSectStepNum--; } len=(nSectStepNum-0.5)*m_nStepWidth; if(nSectStair==0) { cvLeft1=stair2.GetSideCurve2d(0); cvRight1=stair2.GetSideCurve2d(1); width=stair2.GetStairWidth()*0.5; length=stair2.GetStairLength(); if(m_nStartSide!=OFFSET_MID) { len-=m_nStepWidth*m_nStepNum1; } } else if(nSectStair==1) { cvLeft1=stair1.GetSideCurve2d(0); cvRight1=stair1.GetSideCurve2d(1); width=stair1.GetStairWidth()*0.5; length=stair1.GetStairLength(); if(m_nStartSide==OFFSET_MID) { len-=m_nStepWidth*m_nStepNum2; } } else { return FALSE; } double dLen=0; //投影长 if(fabs(cos(m_dSectRotation))>_DIST_SNAP) { dLen=width*tan(m_dSectRotation); } else { return FALSE; } if((len+fabs(dLen)+m_nStepWidth/3.0 )>length ||(len-fabs(dLen)-m_nStepWidth/3.0 )<_DIST_SNAP) //剖断线转角过大，不能与梯段两边都相交 { double dist=(len_DIST_SNAP) { dLen=dist; } else { dLen=-dist; } } double nStairHeight1=0,nStairHeight2=0; nStairHeight1=GetStepNum1()*GetStepHeight(); //边梯高 nStairHeight2=GetStepNum2()*GetStepHeight(); //中梯高 lSectPos=(len-dLen)/length; rSectPos=(len+dLen)/length; XPointDir2d pt; cvLeft1.Polar(len-dLen, pt); ptLeft2d=pt; cvRight1.Polar(len+dLen, pt); ptRight2d=pt; return TRUE; } //获得剖断线所在梯段：0，中梯段；1，边梯段；-1，没有剖断 int TDbParallelStair::GetSectStairPos()const { if(m_nStairFlag==SF_TOP) return -1; if(abs(m_nSectStepNum)<1|| abs(m_nSectStepNum)>m_nStepNum1+m_nStepNum2) { return -1; } int nSectStepNum=m_nSectStepNum; //剖断步数 if(nSectStepNum < 0) //负数调整为正的 { nSectStepNum=m_nSectStepNum+m_nStepNum1+m_nStepNum2+1; } int nSectStair; if((m_nStartSide==OFFSET_MID&&nSectStepNum<=m_nStepNum2) ||(m_nStartSide!=OFFSET_MID&&nSectStepNum>m_nStepNum1) ) { nSectStair=0; //剖断在中梯 } else { nSectStair=1; //剖断在边梯 } return nSectStair; } // 由平面二维点推算剖切步数 int TDbParallelStair::HitSectPosByPoint2d(XPoint ptHit2d) const { TDbLineStair stair1, stair2,stair3; TDbSlab slab; TDbHandRail rail, rail2; ExplodeTo(stair1, stair2, stair3, slab, rail, rail2); XDirectionCurve cvLeft1=stair1.GetSideCurve2d(0); XDirectionCurve cvRight1=stair1.GetSideCurve2d(1); XPoly2D poly1(1); poly1.AppendNode(cvLeft1.StartPoint()); poly1.AppendNode(cvRight1.StartPoint()); poly1.AppendNode(cvRight1.EndPoint()); poly1.AppendNode(cvLeft1.EndPoint()); ptHit2d.z=0; int nPosHit=-1; if((ptHit2d&poly1)!=PR_OUTSIDE) { XPoint ptPrj; cvLeft1.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft1.StartPoint())/m_nStepWidth); if(m_nStartSide == OFFSET_MID) { nPosHit += m_nStepNum2+1; } else { nPosHit += 1; } } else { XDirectionCurve cvLeft2=stair2.GetSideCurve2d(0); XDirectionCurve cvRight2=stair2.GetSideCurve2d(1); XPoly2D poly2(1); poly2.AppendNode(cvLeft2.StartPoint()); poly2.AppendNode(cvRight2.StartPoint()); poly2.AppendNode(cvRight2.EndPoint()); poly2.AppendNode(cvLeft2.EndPoint()); if((ptHit2d&poly2)!=PR_OUTSIDE) { XPoint ptPrj; cvLeft2.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft2.StartPoint())/m_nStepWidth); if(m_nStartSide == OFFSET_MID) { nPosHit += 1; } else { nPosHit += m_nStepNum1+1; } } else { XDirectionCurve cvLeft3=stair3.GetSideCurve2d(0); XDirectionCurve cvRight3=stair3.GetSideCurve2d(1); XPoly2D poly3(1); poly3.AppendNode(cvLeft3.StartPoint()); poly3.AppendNode(cvRight3.StartPoint()); poly3.AppendNode(cvRight3.EndPoint()); poly3.AppendNode(cvLeft3.EndPoint()); if((ptHit2d&poly3)!=PR_OUTSIDE) { XPoint ptPrj; cvLeft3.ProjectToMe(ptHit2d, ptPrj); nPosHit=(int)(ptPrj.Distance2d(cvLeft3.StartPoint())/m_nStepWidth); if(m_nStartSide == OFFSET_MID) { nPosHit += m_nStepNum2+1; } else { nPosHit += 1; } } } } return nPosHit; } double TDbParallelStair::GetTextHeight()const { assertReadEnabled(); return m_dTextHeight; } void TDbParallelStair::SetTextHeight(double h) { assertWriteEnabled(); m_dTextHeight=h; } Adesk::UInt8 TDbParallelStair::GetStepNum1() const { assertReadEnabled(); return m_nStepNum1; } Adesk::UInt8 TDbParallelStair::GetStepNum2() const { assertReadEnabled(); return m_nStepNum2; } double TDbParallelStair::GetStepHeight() const { assertReadEnabled(); return m_nStepHeight; } void TDbParallelStair::SetStepNum1(Adesk::UInt8 n) { assertWriteEnabled(); m_nStepNum1=n; } void TDbParallelStair::SetStepNum2(Adesk::UInt8 n) { assertWriteEnabled(); m_nStepNum2=n; } double TDbParallelStair::GetSlabSize() const { assertReadEnabled(); return m_nSlabSize; } double TDbParallelStair::GetSlabSizeMid() const { assertReadEnabled(); double nSlabSizeMid=m_nSlabSizeMid; if(GetAlignment()!=3) { if(GetAlignment()!=0) { double nLen1=m_nStepNum1*m_nStepWidth, nLen2=m_nStepNum2*m_nStepWidth; double dist=nLen1-nLen2; if(dist>_DIST_SNAP) { nSlabSizeMid=GetSlabSize()+dist*(GetAlignment()==1?0.5:1); } else { nSlabSizeMid=GetSlabSize(); } } else { nSlabSizeMid=GetSlabSize(); } } return nSlabSizeMid; } double TDbParallelStair::GetSlabSizeSide() const { assertReadEnabled(); double nSlabSizeSide=m_nSlabSizeSide; if(GetAlignment()!=3) { if(GetAlignment()!=0) { double nLen1=m_nStepNum1*m_nStepWidth, nLen2=m_nStepNum2*m_nStepWidth; double dist=nLen1-nLen2; if(dist>_DIST_SNAP) { nSlabSizeSide=GetSlabSize(); } else { nSlabSizeSide=GetSlabSize()-dist*(GetAlignment()==1?0.5:1); } } else { nSlabSizeSide=GetSlabSize(); } } return nSlabSizeSide; } double TDbParallelStair::GetRailHeight() const { assertReadEnabled(); return m_nRailHeight; } double TDbParallelStair::GetRailWidth() const { assertReadEnabled(); return m_nRailWidth; } double TDbParallelStair::GetRailDistToSide() const { assertReadEnabled(); return m_nRailDistToSide; } double TDbParallelStair::GetRailDistMid() const { assertReadEnabled(); return m_nRailDistMid; } double TDbParallelStair::GetRailDist() const { assertReadEnabled(); return m_nRailDist; } double TDbParallelStair::GetSpaceWidth() const { assertReadEnabled(); return m_nSpaceWidth; } double TDbParallelStair::GetStairWidth() const { assertReadEnabled(); return m_nStairWidth; } double TDbParallelStair::GetMStairWidth() const { assertReadEnabled(); return m_nMStairWidth; } double TDbParallelStair::GetStepWidth() const { assertReadEnabled(); return m_nStepWidth; } Adesk::UInt8 TDbParallelStair::GetStairFlag() const { assertReadEnabled(); return m_nStairFlag; } int TDbParallelStair::GetSectStepNum()const { assertReadEnabled(); return m_nSectStepNum; } double TDbParallelStair::GetElevation() const { assertReadEnabled(); return m_ptLocation.z; } XPoint TDbParallelStair::GetLocation() const { assertReadEnabled(); return m_ptLocation; } double TDbParallelStair::GetRotation() const { assertReadEnabled(); return m_nRotation; } int TDbParallelStair::GetStartSide() const { assertReadEnabled(); return m_nStartSide; } int TDbParallelStair::GetAlignment() const { assertReadEnabled(); return m_nAlignment; } XPoint TDbParallelStair::GetUpRight2d() const { assertReadEnabled(); XPoint pt=GetUpLeft2d(); ads_polar(XPoint(pt), m_nRotation, m_nSpaceWidth, pt); return pt; } XPoint TDbParallelStair::GetUpLeft2d() const { assertReadEnabled(); XPoint pt=m_ptLocation; pt.z=0; return pt; } void TDbParallelStair::SetSlabSize(double s) { assertWriteEnabled(); m_nSlabSize=s; } void TDbParallelStair::SetSlabSizeSide(double s) { assertWriteEnabled(); m_nSlabSizeSide=s; } void TDbParallelStair::SetSlabSizeMid(double s) { assertWriteEnabled(); m_nSlabSizeMid=s; } void TDbParallelStair::SetRailHeight(double l) { assertWriteEnabled(); m_nRailHeight=l; } void TDbParallelStair::SetRailWidth(double w) { assertWriteEnabled(); m_nRailWidth=w; } void TDbParallelStair::SetRailDistToSide(double l) { assertWriteEnabled(); m_nRailDistToSide=l; } void TDbParallelStair::SetRailDistMid(double l) { assertWriteEnabled(); m_nRailDistMid=l; } void TDbParallelStair::SetRailDist(double l) { assertWriteEnabled(); m_nRailDist=l; } void TDbParallelStair::SetStairFlag(Adesk::UInt8 flag) { assertWriteEnabled(); m_nStairFlag=flag; } void TDbParallelStair::SetSpaceWidth(double w) { assertWriteEnabled(); m_nSpaceWidth=w; } void TDbParallelStair::SetStepWidth(double w) { assertWriteEnabled(); m_nStepWidth=w; } void TDbParallelStair::SetStairWidth(double w) { assertWriteEnabled(); m_nStairWidth=w; } void TDbParallelStair::SetMStairWidth(double w) { assertWriteEnabled(); m_nMStairWidth=w; } void TDbParallelStair::SetElevation(double elev) { assertWriteEnabled(); m_ptLocation.z = elev; } void TDbParallelStair::SetLocation(const XPoint &pt) { assertWriteEnabled(); m_ptLocation = pt; } void TDbParallelStair::SetRotation(double rot) { assertWriteEnabled(); m_nRotation=rot; } void TDbParallelStair::SetStartSide(int nSide) { assertWriteEnabled(); m_nStartSide=nSide; } void TDbParallelStair::SetAlignment(int nSide) { assertWriteEnabled(); m_nAlignment=nSide; } void TDbParallelStair::SetStepHeight(double h) { assertWriteEnabled(); m_nStepHeight=h; } void TDbParallelStair::SetArrow(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx|=SFEX_ARROW; else m_nFlagEx&=~SFEX_ARROW; } BOOL TDbParallelStair::IsArrow() const { return ((m_nFlagEx&SFEX_ARROW)!=0); } BOOL TDbParallelStair::IsAutoOutRail() const { return ((m_nFlagEx&SFEX_AUTOOUTRAIL)!=0); } // TArch6 memeber BOOL TDbParallelStair::IsAutoRail() const { return ((m_nFlagEx&SFEX_AUTORAIL)!=0); } BOOL TDbParallelStair::IsOutRail()const { return (m_nFlagEx&SFEX_OUTRAIL)!=0; } void TDbParallelStair::SetOutRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx|=SFEX_OUTRAIL; else m_nFlagEx&=~SFEX_OUTRAIL; } BOOL TDbParallelStair::IsArcPlatform() const { return ((m_nFlagEx&SFEX_ARCPLAT)!=0); } BOOL TDbParallelStair::HasSideBeam(int nSide) const { int nBitFlag=nSide? SFEX_RBEAM : SFEX_LBEAM; return ((m_nFlagEx&nBitFlag)!=0); } BOOL TDbParallelStair::IsAscent() const { return ((m_nFlagEx&SFEX_ASCENT)!=0); } BOOL TDbParallelStair::IsOnGround() const { return ((m_nFlagEx&SFEX_GROUND)!=0); } BOOL TDbParallelStair::HasSlant() const { return ((m_nFlagEx&SFEX_SLANT)!=0); } void TDbParallelStair::SetAutoOutRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_AUTOOUTRAIL; else m_nFlagEx &= ~SFEX_AUTOOUTRAIL; } void TDbParallelStair::SetAutoRail(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_AUTORAIL; else m_nFlagEx &= ~SFEX_AUTORAIL; } void TDbParallelStair::SetAscent(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_ASCENT; else m_nFlagEx &= ~SFEX_ASCENT; } void TDbParallelStair::SetOnGround(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_GROUND; else m_nFlagEx &= ~SFEX_GROUND; } void TDbParallelStair::SetSlant(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_SLANT; else m_nFlagEx &= ~SFEX_SLANT; } void TDbParallelStair::SetArcPlatform(BOOL bTrue) { assertWriteEnabled(); if(bTrue) m_nFlagEx |= SFEX_ARCPLAT; else m_nFlagEx &= ~SFEX_ARCPLAT; } void TDbParallelStair::SetSideBeam(int nSide, BOOL bTrue) { assertWriteEnabled(); int nBitFlag=nSide? SFEX_RBEAM : SFEX_LBEAM; if(bTrue) m_nFlagEx |= nBitFlag; else m_nFlagEx &= ~nBitFlag; } double TDbParallelStair::GetBeamHeight() const { return m_nBeamHeight; } double TDbParallelStair::GetBeamThick() const { return m_nBeamThick; } double TDbParallelStair::GetSlabThick() const { return m_nSlabThick; } AcDbObjectId TDbParallelStair::GetLayerBeam3d() const { return m_idLayerBeam3d; } AcDbObjectId TDbParallelStair::GetLayerStep3d() const { return m_idLayerStep3d; } AcDbObjectId TDbParallelStair::GetLayerHand3d() const { return m_idLayerHand3d; } AcDbObjectId TDbParallelStair::GetLayerRail3d() const { return m_idLayerRail3d; } AcDbObjectId TDbParallelStair::GetLayerText() const { return m_idLayerText; } AcDbObjectId TDbParallelStair::GetTextStyle() const { return m_idTextStyle; } AcDbObjectId TDbParallelStair::GetLayerArrow() const { return m_idLayerArrow; } void TDbParallelStair::SetBeamHeight(double val) { assertWriteEnabled(); m_nBeamHeight = val; } void TDbParallelStair::SetSlabThick(double val) { assertWriteEnabled(); m_nSlabThick=val; } void TDbParallelStair::SetBeamThick(double val) { assertWriteEnabled(); m_nBeamThick=val; } void TDbParallelStair::SetLayerBeam3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerBeam3d=idLayer; } void TDbParallelStair::SetLayerStep3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerStep3d=idLayer; } void TDbParallelStair::SetLayerHand3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerHand3d=idLayer; } void TDbParallelStair::SetLayerRail3d(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerRail3d=idLayer; } void TDbParallelStair::SetLayerText(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerText=idLayer; } void TDbParallelStair::SetTextStyle(AcDbObjectId idStyle) { assertWriteEnabled(); m_idTextStyle=idStyle; } void TDbParallelStair::SetLayerArrow(AcDbObjectId idLayer) { assertWriteEnabled(); m_idLayerArrow=idLayer; } void TDbParallelStair::SetSectStepNum(int n) { assertWriteEnabled(); m_nSectStepNum=n; } double TDbParallelStair::GetSectRotation()const { return m_dSectRotation; } void TDbParallelStair::SetSectRotation(double r) { assertWriteEnabled(); m_dSectRotation=r; } //add by xlc 090426，箭头文字，动态数据 CString TDbParallelStair::GetTextUp() const { assertReadEnabled(); CString sVal(_T("上")); const TEntityFields &fd = GetFields(); fd.GFD(_T("上楼箭头文字"), sVal); return sVal; } void TDbParallelStair::SetTextUp(const TCHAR *sVal) { assertWriteEnabled(); TEntityFields &fd = Fields(); fd.SFD(_T("上楼箭头文字"), sVal); } CString TDbParallelStair::GetTextDown() const { assertReadEnabled(); CString sVal(_T("下")); const TEntityFields &fd = GetFields(); fd.GFD(_T("下楼箭头文字"), sVal); return sVal; } void TDbParallelStair::SetTextDown(const TCHAR *sVal) { assertWriteEnabled(); TEntityFields &fd = Fields(); fd.SFD(_T("下楼箭头文字"), sVal); } // sg add 100722，支持统一标高 bool TDbParallelStair::UnifyElevation(double dElevation) { SetElevation(dElevation); return true; } // cet 2013.9.5 add CString TDbParallelStair::GetXml(const AcGeMatrix3d& mat) const { CString sXml; AcDbVoidPtrArray arrEnts; explode(arrEnts); int nSize = arrEnts.length(); for (int i = 0; i < nSize; ++i) { AcDbEntity *pEnt = (AcDbEntity*)arrEnts[i]; if (pEnt == NULL) { continue; } TDbLineStair *pLineStair = TDbLineStair::cast(pEnt); if (pLineStair != NULL) { sXml += pLineStair->GetXml(mat); continue; } TDbSlab *pSlab = TDbSlab::cast(pEnt); if (pSlab != NULL) { sXml += pSlab->GetXml(mat); } } ReleaseEntSet(arrEnts); return sXml; } ///////////////////////////////////////////////////////////////////////////// void InitDbParallelStair(BOOL bTrue) { if(bTrue) { TDbParallelStair::rxInit(); acrxBuildClassHierarchy(); TDbParallelStair::InitMatchProtocol(TRUE); } else { TDbParallelStair::InitMatchProtocol(FALSE); deleteAcRxClass(TDbParallelStair::desc()); } }