// InsertOpeningDlg.h: interface for the CInsertOpeningDlg class.
//
//////////////////////////////////////////////////////////////////////

#if !defined(AFX_INSERTOPENINGDLG_H__9D483821_3D75_11D3_827A_0000E82EB017__INCLUDED_)
#define AFX_INSERTOPENINGDLG_H__9D483821_3D75_11D3_827A_0000E82EB017__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000
class XBayWindow;
class TDbWall;
class TDbOpening;

class XOpeningParam {
public:
    UINT m_nId;
    CString m_csText;
    BOOL m_bCheck;
public:
    XOpeningParam(UINT id, const TCHAR *pszText, BOOL bCheck=true): 
      m_nId(id), m_csText(pszText), m_bCheck(bCheck)
      {}
};

// 专门用于智能插入门窗，建立墙体和墙体范围内的轴网的关系
// 后续其实可以直接将m_aryAxisIds替换为顺序点的数组，更方便试用
class  TWallAxisData
{
public:
	AcDbObjectId		m_idWall;
	AcDbObjectIdArray	m_aryAxisIds;

public:
	TWallAxisData(AcDbObjectId idWall): m_idWall(idWall) {}
	TWallAxisData & operator = (const TWallAxisData &src);
};

// 插入/编辑门窗对话框的基类
// 抽象了: 门/窗/矩形洞/凸窗/弧窗 的插入和编辑界面
class CInsertOpeningDlg : public CModelessDialog  {
public:
	static bool bRefreshDlg;//add by whl ,Is In Funtion RefreshInsWDHDlg()?
	static int curType;//add by whl
	static bool bLineWall;//add by whl ,for SequenceInsert()
	static CInsertOpeningDlg* g_pCurDlg;//add by whl
public:
    DECLARE_DYNAMIC(CInsertOpeningDlg)

	CInsertOpeningDlg(UINT id, CWnd* pParent = NULL); // standard constructor
	virtual ~CInsertOpeningDlg();

    enum {USE_INSERT=0, USE_REPLACE=1, USE_EDIT=2};

// Overrides
	// ClassWizard generated virtual function overrides
	//{{AFX_VIRTUAL(CInsertOpeningDlg)
	protected:
	virtual void DoDataExchange(CDataExchange* pDX);    // DDX/DDV support
	virtual BOOL PreCreateWindow(CREATESTRUCT& cs);
	//}}AFX_VIRTUAL

// Implementation
protected:
	// Generated message map functions
	//{{AFX_MSG(CInsertOpeningDlg)
	virtual BOOL OnInitDialog();
	afx_msg void OnFreeInsert();
    afx_msg void OnSequenceInsert();
	afx_msg void OnFixdistOnPier();
    afx_msg void OnFixdistOnAxis();
    afx_msg void OnArcWallInsert();
	afx_msg void OnColumnInsert();
	afx_msg void OnIsolineInsert();
	afx_msg void OnIsowall();
	afx_msg void OnUplevel();
	afx_msg void OnReplace();
	virtual void OnSelchangeLabel();
	virtual void OnOK();
	afx_msg void OnSelchangeParamList();
	afx_msg void OnClose();
	afx_msg void OnLookup();

	afx_msg void OnBtnAptitude();//add by lgy 20120517 智能插入门窗
	//add by whl
	afx_msg void OnDestroy();
	afx_msg void OnWin();
	afx_msg void OnDoor();
	afx_msg void OnDoorWin();
	afx_msg void OnTwoDoor();
	afx_msg void OnArcWin();
	afx_msg void OnBayWin();
	afx_msg void OnRectHole();
	afx_msg void OnGJK();

	//add by lgy 20120118	为拾取参数按钮添加响应函数
	afx_msg void OnInQuite();

	afx_msg void OnHasHoleInsert();// add by xly
	//}}AFX_MSG
	DECLARE_MESSAGE_MAP()
	afx_msg BOOL OnToolTipText(UINT nID, NMHDR* pNMHDR, LRESULT* pResult);
	void createToolBar();

public:
// Dialog Data
	//{{AFX_DATA(CInsertOpeningDlg)
	CComboBox   m_lstHeightBox;
    CComboBox   m_lstWidthBox;
    CComboBox   m_lstSillBox;
    CComboBox   m_lstLabelBox;
    CComboBox   m_lstDistBox;
	CCheckListBox	m_lstParamEdit;
	//}}AFX_DATA
	CToolBarCtrl m_toolbar;
    double m_nWidth; //窗宽
    double m_nHeight; //窗高
    double m_nSill; //窗台高
    CString m_csLabel; //编号

    DList<XOpeningParam> m_lstParam;
    static int g_nInsertMode;
    static BOOL	g_bChSide;
    static CString g_csDist;
	
	//add by lgy 20120119	保存原来的对话框类型
	static int g_iOldInsertMode;

	// add by xly on 110119 增加门窗个数和类型
	CString m_csWinDoorType;
	CString m_csWinDoorNumms;

	// add by xly on 110216增加类型控件
	 CComboBox   m_lstTypeBox;
public:

    BOOL ModifyOpeningWithSameLabel(TDbOpening &op, BOOL bAskUser);
    BOOL GetParamCheck(UINT id) const; //判断控件参数是否旋转
    int GetUsage() const; //取得对话框的用途: 插入/编辑/替换
    void ResizeDialog(BOOL bExpand);


    // 创建一新实体并加入到模型空间, pWall以Read方式打开的指针
    // 返回: TRUE-成功, FALSE--失败
    virtual AcDbObjectId NewEntityToModelSpace(TDbWall *pWall, const XPoint &ptLoc1, BOOL bUplevel=FALSE, double nWidth=0.0, double nSill=0.0);
    //用对话框的参数更新对象参数
    virtual void UpdateOpening(TDbOpening &op, BOOL bLoadStyle=TRUE);
    virtual TDbOpening * NewOpening();
    virtual UINT GetInsertMode() const; //取得插入方式的控件ID
    //virtual BOOL UpdateData(BOOL bSaveAndValidate=TRUE);
    virtual XBayWindow *AllocBayWinData() {
        return NULL;
    }
    virtual double GetOpeningWidth() const { //子类可重载本方法
        return m_nWidth;
    }
    virtual void SetOpeningWidth(double nW) { //子类可重载本方法, 用于柱间插窗
        m_nWidth=nW;
    }
    virtual double GetOpeningHeight() const { //子类可重载本方法
        return m_nHeight;
    }
    virtual void SetOpeningHeight(double nW) { //子类可重载本方法, 用于柱间插窗
        m_nHeight=nW;
    }
    virtual double GetOpeningSill() const { //子类可重载本方法
        return m_nSill;
    }
    virtual void SetOpeningSill(double nW) { //子类可重载本方法, 用于柱间插窗
        m_nSill=nW;
    }

	// sg add 110906，本函数主要是用来更新子类中特有的属性，比如，矩形洞更新洞口深度数据，子类可重载
	virtual int ModifySpecialProperty(TDbOpening &op) {
		return 1;
	}

	//add by lgy 20120119	拾取门窗对象的时候信息不一定全是在积累中
	virtual int ObjToDlg(TDbOpening* pOpening);

	// add by xly on 110214 获得门窗个数和类型
	virtual int GetOpeningNums() const { //子类可重载本方法
		return _ttoi(m_csWinDoorNumms);
	}
	virtual CString GetOpeningStyle() const { //子类可重载本方法
		return m_csWinDoorType;
	}

    virtual const TCHAR * GetOpeningLabel() const { //子类可重载本方法
        return (const TCHAR *)m_csLabel;
    }
    virtual void SetOpeningLabel(const TCHAR *pszLabel);
    virtual BOOL ReadParamFromRegistry();
    virtual BOOL WriteParamToRegistry() const;

    virtual BOOL GetTitleKeyString(XString &sKeyStr) const; //获得对话框标题关键字串
    virtual BOOL GetRegLocation(XString &sRegLoc) const; //关键注册位置, 子类需要重载本方法
    // 门联窗需要重载本方法, 从其中的门获取编号, 如果op与对话框类型不一致, 则返回FALSE
    // bGetOther--门联窗用控制是否取另一个门的编号
    virtual BOOL GetLabel(const TDbOpening &op, XString &sLabel, BOOL bGetOther) const;

    // 门联窗需要重载下列2个方法, 取中心位置
    virtual XPoint GetLocation(const TDbOpening &op) const;
    virtual double GetTotalWidth(const TDbOpening &op) const;

    virtual BOOL InitParamList(DList<XOpeningParam> &lstParam) const;

    //子类一般不需要重载的函数

    // 如果不需要初始化编号列表, 则返回FALSE
    virtual BOOL GetLabelListFromDwg(XStringList &lstLabels) const;
    virtual void SetupLabelList(); 
    // 修改门窗, 用于对象编辑
    virtual BOOL ModifyOpening(TDbOpening &op); 
    // 点取了插入方式按钮
    virtual void OnChangeInsertMode(UINT id);

    virtual BOOL GetStyles(AcDbObjectId &id2d, AcDbObjectId &id3d);
    // 用于编辑以及改选编号时
    virtual BOOL SetDlgParamFrom(const TDbOpening &op);
    // 修改门窗位置及参数, 门联窗对话框必须重载本函数
    virtual BOOL ModifyOpeningPos(TDbOpening &op, const XPoint &ptNewLoc);
    // 用对话框上的参数更新实体数据, 不重新计算插入点
    virtual BOOL ModifyOpeningWithDlgParam(TDbOpening &op);

	virtual int GetOpeningKind() const=0;
	void SetReplacing();

	static CString CalcAutoLabel(TDbOpening *pOpening);
	void InvalidateOldLabel() {m_bOldLabel = true;}
	void ValidateOldLabel() {m_bOldLabel = false;}
	bool GoodLabel() const {return !m_bOldLabel;}
	// 该函数用来获取准确的label值。包括普通编号
	CString GetAutoLabel(TDbOpening *pOpening);
	void AttachOpening(TDbOpening *pOpening) {m_pOpeningAttach = pOpening;}
	void DettachOpening() {m_pOpeningAttach = NULL;}
	bool IsAutoName() const;
private:
	CString m_strAutoLabel; // 注意保持该值的更新：当属性发生变动的时候，重新计算一下该值
	TDbOpening *m_pOpeningAttach;
	bool m_bOldLabel;
};
class CGroupOpeningDlg:public CInsertOpeningDlg
{
protected:
	TDbOpening *m_pOpeningBak;
public:
	CStatic	m_pic3d;
    static CString  s_csDoor3DStyle;
	CImageDC m_PicSlide;
public:
	CGroupOpeningDlg(CWnd* pParent);	
	~CGroupOpeningDlg();
	enum { IDD = IDD_GROUP_OPENING };

	virtual void DoDataExchange(CDataExchange*pDX);
	
    virtual TDbOpening * NewOpening();
	virtual BOOL GetRegLocation(XString &sRegLoc) const;
	virtual int GetOpeningKind()const;
	virtual int SetDlgParamFrom(const TDbOpening &op);
	// sg add 110803，解决自动编号丢失问题
    virtual void UpdateOpening(TDbOpening &op, BOOL bLoadStyle=TRUE);

	void ShowSlide();
	virtual BOOL OnInitDialog();

	// sg add 110804，解决点击构件库后，自动编号无效的问题
	afx_msg void OnGroupOpeningGJK();

	afx_msg void OnPaint();
	afx_msg void OnPictureup();
    afx_msg BOOL OnSetCursor(CWnd* pWnd, UINT nHitTest, UINT message);

	DECLARE_MESSAGE_MAP()
};
// 返回值: FALSE--Exit;  TRUE--Change Insert Mode
BOOL FreeInsert();  // 自由插入门窗
BOOL FixInsert(); // 定距插门窗
BOOL IsoInsert(); // 等分插门窗
BOOL IsoWallInsert(); // 墙段等分插门窗
BOOL ColInsert(); // 柱间插门窗
void InsertOpening();

#endif // !defined(AFX_INSERTOPENINGDLG_H__9D483821_3D75_11D3_827A_0000E82EB017__INCLUDED_)