#ifndef _TCHKERNALGLOBALFUNC_H_
#define _TCHKERNALGLOBALFUNC_H_

#ifndef _TCOLUMNDATA_H_
#include "TColumnData.h"
#endif

#ifndef _TARCHPERDOCDATA_H_
#include "TArchPerDocData.h"
#endif

#ifndef __DBSPACE_H
#include "DbSpace.h"
#endif

class TDbProtectEntity;

TARCH_EXP TArchPerDocData* GetCurDocData();
TARCH_EXP void SearchSpace(TPickEntSet &ssWalls,const TDPtrList<AcDbObjectId> &lstColu,TDPtrList<TDbSpace> &res);
TARCH_EXP TDPtrList<TSortWallOnPt>& GetAllSortWalls();
TARCH_EXP int SelectWallSide(TEntitySet &entWall, TADSGePoint3d & loc, double *drt);
TARCH_EXP BOOL GetAxisInter(const TADSGePoint3d& ptLow, const TADSGePoint3d& ptUp, TADSGePointDir2d& ptRes);
TARCH_IMPEXP int GetBlockBoundary(AcDbObjectId idBlock, TGGePoly2D &poly, BOOL bAddIfNone = FALSE);
// 根据一指定的点, 搜索一房间的内壁轮廓线
TARCH_EXP int GenSpacePoly(const TADSGePoint3d &ptPick, TGGePoly2D &poly);
TARCH_EXP int EditWallPathc0(AcDbObjectId id);
TARCH_EXP int GetExistOutlineFromInsert(const TEntitySet &e, TGGePoly2D &polyOutline);

// 根据当前视图方向和系统的设定, 确定显示方式
// 返回: DRAW_2D和DRAW_3D的按位组合: DRAW_2D, DRAW_3D, DRAW_2D+DRAw_3D
TARCH_EXP int GetViewDrawMode();

TARCH_IMPEXP AcDbObjectId MakeTBlockInsert(const TCHAR *pszBlock, TADSGePoint3d ptInsert,double sx, double sy, double sz, double rot, int nMask);
// 更新指定实体的显示
TARCH_EXP void UpdateGraphic(TPickEntSet &ss);
TARCH_EXP void UpdateGraphic(const TDPtrList<AcDbObjectId> &ss);

// 取柱子的轮廓线, 确定id必须有效的代表可以读取的柱子id
TARCH_EXP int GetColumnOutline(const AcDbObjectId &idColu, TGGePoly2D &poly);

// 从二维图块中提取外轮廓线
TARCH_EXP int GetBoundaryFromInsert2D(TEntitySet &ent, TGGePoly2D &polyOutline);

// 取当前图中的所有柱子的边界
TARCH_EXP void GetAllColumnBoundry(TDPtrList<TGGePoly2D> &lstClipBoundry);

TARCH_EXP int GetClipBoundary1(TGGePoly2D &poly2d);
TARCH_EXP void UpdateTDbEntity();

// 拖动实体,block
TARCH_EXP int DragInsertBlock1(const TCHAR *szBlock, int nFlag, const AcGeScale3d &scales);
TARCH_EXP int IDragInsertBlock(TADSGePoint3d &ptBase, TEntitySet &ent, int nFlag);

TARCH_EXP AcDbObjectId MakeBlockInsert(const TCHAR *pszBlock, TADSGePoint3d ptInsert,double sx, double sy, double sz, double rot);

TARCH_EXP TCString GetCurCommand();


// 打开文件,并在这个文档内自动执行命令
TARCH_EXP void MdiOpenDwgFile(const TCHAR *pszFile, const TCHAR *pszCmdStr);

TARCH_EXP void OpenDwgWithCurNls(CString &csFileName);

//由命令简称得到命令全称（加前缀）
TARCH_EXP TCString GetFullCmdName(const TCHAR *szName);

//定义命令，自动加前缀
TARCH_EXP void TchAddCommand(const TCHAR *szAppName0,const STArxCommandTable cmdTable[],const UINT eleNum, BOOL bLispCmd=FALSE);

// 初始化Aol库的连接
TARCH_EXP void InitAol(const TCHAR *szAppName);


TARCH_EXP void DocStatus();
TARCH_EXP void InitDLRegistry(HMODULE modHandle,   const TCHAR *szAppName);

// 按需加载的控制
TARCH_EXP void UpdateDLRegistry(const TCHAR *szAppName, const STArxCommandTable cmdTable[],const UINT eleNum);

TARCH_EXP void UpdateDLRegistry(const TCHAR *szAppName, const STExtern_fun cmdTable[],const UINT eleNum);
TARCH_EXP int SelectUpFace(AcGePlane &plane);

TARCH_EXP void ClearKeyboardBuffer();
TARCH_EXP bool IsLispExpress();

TARCH_EXP TPickEntSet& DocGetPickFirst();

TARCH_EXP TEntitySet& DocGetEntMouseOn();

TARCH_EXP bool _docGetPScale(double &dRet);
TARCH_EXP bool _docSetPScale(const double &d);
TARCH_EXP bool _docGetMeterUnitDraw(BOOL &bMeter);
TARCH_EXP bool _docSetMeterUnitDraw(const BOOL &bMeter);
TARCH_EXP double DocGetPScale();

TARCH_EXP TPickEntSet& DocGetPickGrip();

//提示用户选择一个实体, 或者从PickFirst中选取(如果存在), 排除重合实体
//szPrompt--提示;  entResult--结果;  ptPick--点取位置; rbBaseMask--DXF过滤表
TARCH_EXP int SelectEntity1(const TCHAR *szPrompt, TEntitySet &entResult, TADSGePoint3d &ptPick, const TRBList &rbBaseMask);

TARCH_EXP int SelectEntity1(double nPrec, const TCHAR *szPrompt, TEntitySet &entResult, TADSGePoint3d &ptPick, const TRBList &rbBaseMask);

//提示用户选择一个实体, 或者从PickFirst中选取(如果存在)
//szPrompt--提示;  entResult--结果;  ptPick--点取位置; rbBaseMask--DXF过滤表
TARCH_EXP int SelectEntity(const TCHAR *szPrompt, TEntitySet &entResult, TADSGePoint3d &ptPick, const TRBList &rbBaseMask);

//支持关键字，其它同上
TARCH_EXP int SelectEntity(const TCHAR *szPrompt, TEntitySet &entResult, TADSGePoint3d &ptPick, const TRBList &rbBaseMask,const TCHAR* szKeyword,TCHAR& cRet);

//提示用户选择一个实体, 或者从PickFirst中选取(如果存在)
//szPrompt--提示;  entResult--结果;  rbBaseMask--DXF过滤表
TARCH_EXP int SelectEntity(const TCHAR *szPrompt, TEntitySet &entResult, const TRBList &rbBaseMask);

//支持关键字，其它同上
TARCH_EXP int SelectEntity(const TCHAR *szPrompt, TEntitySet &entResult, const TRBList &rbBaseMask,const TCHAR* szKeyword,TCHAR& cRet);

//提示用户选择多个实体, 或者从PickFirst中选取(如果存在)
//szPrompt--提示;  ssResult--结果;  rbBaseMask--DXF过滤表
TARCH_EXP int SelectEntities(const TCHAR *szPrompt, TPickEntSet &ssResult, const TRBList &rbBaseMask);

//支持关键字，其它同上
TARCH_EXP int SelectEntities(const TCHAR *szPrompt, TPickEntSet &ssResult, const TRBList &rbBaseMask,const TCHAR* szKeyword,TCHAR& cRet);

TARCH_EXP int GetPrepickEntity(TEntitySet &entResult, const TRBList &rbBaseMask);
TARCH_EXP AcDbObjectId GetPrepickEntity(const TRBList &rbBaseMask);
TARCH_EXP AcDbObjectId GetBlock2dFromBlock3d(AcDbObjectId idBlock);

//---结构数据---
#define GRAPHIC			0x01	//图形
#define UNVARYINGLOAD	0x02	//恒荷	
#define VARYINGLOAD		0x04	//活荷

//荷载所属对象
#define BYOBJLOAD	0	//随荷载显示开关
#define SURFACELOAD 1   //面荷
#define BEAMLOAD	2	//梁荷
#define WALLLOAD	3	//墙荷
#define COLULOAD	4	//柱荷
#define NODELOAD	5	//节点荷载

// 截面形状
#define ST_RECT     1   //矩形
#define ST_IBEAM    2   //工字形
#define ST_CIRCLE	3	//圆形
#define ST_POLY     4   //任意形状

//铰接方式
#define HINGE_START		0x01	//起始端或下端
#define HINGE_END		0x02	//终止端或上端

// 内力显示
#define  FORCE_NORMAL	0  //正常
#define  FORCE_N		1  //轴力
#define  FORCE_M		2  //弯矩
#define  FORCE_S		3  //剪力

//荷载查看方式
#define BYGRAPHIC	1	//图形
#define BYUNVARYING	2	//恒荷
#define BYVARYING	3	//活荷
extern TARCH_IMPEXP int g_nLoadDrawMode;	//BYOBJLOAD:随荷载显示开关控制；
extern TARCH_IMPEXP int g_nLoadViewMode;
//SURFACELOAD：仅显示面荷；
//BEAMLOAD：仅显示梁荷
//WALLLOAD：仅显示墙荷
//COLULOAD: 仅显示柱荷
//NODELOAD: 仅显示节点荷载
extern TARCH_IMPEXP int g_nColuForce;	//底层墙柱显示工况
//	eNormal,
//	eVXMax,
//	eVYMax,
//	eNMax,
//	eNMin,
//	eMXMax,
//	eMYMax
extern TARCH_IMPEXP int g_nReinAreaMode;	//配筋面积显示方式
extern TARCH_IMPEXP int g_nReinAreaModeColu;//柱配筋面积显示方式

extern TARCH_IMPEXP BOOL g_bDetailMode;			//特殊梁柱是否简图模式

extern TARCH_IMPEXP double g_dCLTextHeight;		//单元编号文字字高
extern TARCH_IMPEXP int g_nCLTextColorBeam;		//梁单元编号文字颜色
extern TARCH_IMPEXP int g_nCLTextColorColu;		//柱单元编号文字颜色
extern TARCH_IMPEXP int g_nCLTextColorWall;		//剪力墙单元编号文字颜色
extern TARCH_IMPEXP int g_nCLTextColorSlab;		//板单元编号文字颜色
extern TARCH_IMPEXP int g_nCLTextColorNode;		//节点编号文字颜色
extern TARCH_IMPEXP double g_dBHTextHeight;		//截面尺寸文字字高
extern TARCH_IMPEXP int g_nBHTextColorBeam;		//梁截面尺寸文字颜色
extern TARCH_IMPEXP int g_nBHTextColorColu;		//柱截面尺寸文字颜色
extern TARCH_IMPEXP int g_nBHTextColorWall;		//剪力墙截面尺寸文字颜色
extern TARCH_IMPEXP int g_nBHTextColorSlab;		//板截面尺寸文字颜色
extern TARCH_IMPEXP int g_nBHTextColorSlabHole;	//板洞截面尺寸文字颜色
extern TARCH_IMPEXP double g_dRGTextHeight;		//刚域文字字高
extern TARCH_IMPEXP int g_nRGTextColorBeam;		//梁刚域文字颜色
extern TARCH_IMPEXP int g_nRGTextColorColu;		//柱刚域文字颜色
extern TARCH_IMPEXP int g_nGraph;			// 0:正常显示 1:轴力 2: 弯矩 3:剪力;
extern TARCH_IMPEXP double g_dMGrapTextH;		// 弯矩包络图文字高
extern TARCH_IMPEXP double g_dMGrapScal;		// 弯矩包络图比例
extern TARCH_IMPEXP double g_dNGrapTextH;		// 轴力文字高度
extern TARCH_IMPEXP double g_dReinbarWidth;		//钢筋线宽
extern TARCH_IMPEXP double g_dReinbarLenS;		//钢筋直钩平直长度
extern TARCH_IMPEXP double g_dReinbarLenO;		//钢筋斜钩平直长度
extern TARCH_IMPEXP double g_dReinbarLenB;		//钢筋弯钩平直长度
extern TARCH_IMPEXP double g_dReinbarDiaB;		//钢筋弯钩直径
extern TARCH_IMPEXP double g_dReinbarDotWidth;	//点钢筋直径
extern TARCH_IMPEXP double g_dStirrupsLen;		//箍筋平直长度
extern TARCH_IMPEXP int g_nDrawModeSlab;			//楼板显示控制
extern TARCH_IMPEXP int g_nDrawModeSlabBorder;	//楼板边界显示控制
extern TARCH_IMPEXP BOOL g_bShowCrack;			// 显示裂缝图
extern TARCH_IMPEXP BOOL g_bShowDef;				// 显示挠度图
extern TARCH_IMPEXP double g_dSGrapTextH;		// 剪力包络图文字高
extern TARCH_IMPEXP double g_dSGrapScal;		// 剪力包络图幅值;
extern TARCH_IMPEXP double g_dCrackGraphTextH;	// 字高
extern TARCH_IMPEXP double g_dCrackLimit;	    // 裂缝限制值
extern TARCH_IMPEXP double g_dDeflectGraphTextH;	// 字高
extern TARCH_IMPEXP double g_dDeflectGraphScale;	// 幅度
extern TARCH_IMPEXP BOOL g_bAutoBreak;			// 梁柱自动打断控制参数
extern TARCH_IMPEXP BOOL g_bAutoUpdate;			// 自动更新图形控制参数
extern TARCH_IMPEXP Adesk::UInt16 g_iSolidNodeColor;		// 实节点颜色
extern TARCH_IMPEXP Adesk::UInt16 g_iVirtualNodeColor;	// 虚节点颜色
extern TARCH_IMPEXP BOOL g_bSplitFloor;

//设置查看方式nStyle：BYGRAPHIC:图形；BYUNVARYING：恒荷；BYVARYING：活荷
TARCH_EXP BOOL GetViewStyle(int nStyle);
TARCH_EXP void SetViewStyle(int nStyle, BOOL bTrue);
// 去除小数末尾的0
TARCH_EXP CString TrimDoubleZero(double dData, int nNum = -1);

//墙身计算配筋
TARCH_IMPEXP void SetWallBodyCal(BOOL bTrue) ;
TARCH_IMPEXP BOOL IsWallBodyCal();
//墙梁计算配筋
TARCH_IMPEXP void SetWallBeamCal(BOOL bTrue);
TARCH_IMPEXP BOOL IsWallBeamCal();
//墙柱计算配筋
TARCH_IMPEXP void SetWallColuCal(BOOL bTrue);
TARCH_IMPEXP BOOL IsWallColuCal();
//墙身实际配筋
TARCH_IMPEXP void SetWallBodyReal(BOOL bTrue);
TARCH_IMPEXP BOOL IsWallBodyReal();
//墙梁实际配筋
TARCH_IMPEXP void SetWallBeamReal(BOOL bTrue);
TARCH_IMPEXP BOOL IsWallBeamReal();
//墙柱实际配筋
TARCH_IMPEXP void SetWallColuReal(BOOL bTrue);
TARCH_IMPEXP BOOL IsWallColuReal();

//+++结构数据+++

//  判断点是否在柱子内部, 忽略Z坐标
BOOL IsInsideColumn(const TADSGePoint3d &pt);

void ModifyWallAtCorner(TADSGePointList &lstCorners0, TDPtrList<TColumnData> &lstColumns,AcDbObjectId idBlock,LPVOID pReserve = NULL);
BOOL InitBlockWipeout(AcDbObjectId idBlock, int nMaskFlag) ;
int EditProtectEntity(AcDbObjectId id);
bool UnProtect(TDbProtectEntity* pEnt);

void InitDbWall(BOOL bTrue);
void InitDbColumn(BOOL bTrue);
void InitDbBlockInsert(BOOL bTrue);
void InitDbWallPatch(BOOL bTrue);
void InitDbPolyCurveEnt(BOOL bTrue);
void InitDbProtectEntity(BOOL bTrue);

void InitAppDocGlobals(BOOL bTrue);

void GetDwgStamp();
//TARCH_IMPEXP BOOL IsCommandLineEmpty();
//TARCH_IMPEXP BOOL IsAcadIdle();
int InsertBlock();
//只有GlobalFun在用
// 通过一点确定一房间的轮廓
int GenSpaceOutline(const TADSGePoint3d &ptPick, TGGePoly2D &poly, int bCenter);

int ModifyInsert(TEntitySet ent, int nMaskFlag);

//wlw 10.06.21
//使用xData时，注册App名称
int TGRegApp(LPCTSTR pszAppName, AcDbDatabase* pDb = NULL);
//单独绘制保温层标识 wlw 11.03.17
void DrawEntInsulate(const TDPtrList<TGGeCurveSegment> &lstInsulateCurves);
//将poly2d放大缩小，求保温线poly2d时用
void GetOffsetPoly2D(const TGGePoly2D& polySrc, TGGePoly2D& polyOut, double dOffset, bool bZoomOut = true);
//一根线 + 高度 返回一个面
AcDbFace* GetFaceFromSegment(const TGGeCurveSegment& segment, double dHeight);


//command
void ProtectEntity();		
void PrePlot();
void PostPlot();	
void UnProtect();
void BlockUnMask();

void BringFront1();
void BringFront2();
void ConvertInsert();
int SetWallWidth();

void PolyCurveEnt();


inline double DocGetLWallWidth()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_lWallWidth : 120 * _UNIT_SCALE;
}

inline void DocSetLWallWidth(double val)
{
	TArchPerDocData *p = GetCurDocData();
	if (p)
	{
		p->m_lWallWidth = val;
	}
}

inline double DocGetRWallWidth()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_rWallWidth : 120 * _UNIT_SCALE;
}

inline BOOL DocGetIsAcadIdle()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_bAcadIdle : FALSE;
}

inline void DocSetDrawWall(int nMode)
{
	TArchPerDocData *p = GetCurDocData();
	if (p) 
	{
		p->m_nDrawWall  =  nMode;
	}
}

inline TCHAR * DocGetLastCommand()
{
	TArchPerDocData *p = GetCurDocData();
	if (p == NULL)
	{
		return NULL;
	}
	return p->m_szLastCommand;
}

inline BOOL DocGetIsUpdateDisp()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_bUpdateDisp : FALSE;
}

inline void DocSetIsUpdateDisp(BOOL bTrue)
{
	TArchPerDocData *p = GetCurDocData();
	if (p)
	{
		p->m_bUpdateDisp = bTrue;
	}
}

inline int DocGetWallOsnapType()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_nOsnapType : FALSE;
}

inline void DocSetRWallWidth(double val)
{
	TArchPerDocData *p = GetCurDocData();
	if (p) 
	{
		p->m_rWallWidth = val;
	}
}

inline BOOL DocGetIsDwgBegin()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_bDwgBegin : FALSE;
}

inline void DocSetIsDwgBegin(BOOL bTrue)
{
	TArchPerDocData *p = GetCurDocData();
	if (p)
	{
		p->m_bDwgBegin = bTrue;
	}
}

inline void DocSetIsAcadIdle(BOOL bTrue)
{
	TArchPerDocData *p = GetCurDocData();
	if (p)
	{
		p->m_bAcadIdle = bTrue;
	}
}

inline double DocGetMinLenWall()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_nMinLenWall : 20.0 * _UNIT_SCALE;
}

inline void DocSetWallOsnapType(int bTrue)
{
	TArchPerDocData *p = GetCurDocData();
	if (p) 
	{
		p->m_nOsnapType  =  bTrue;
	}
}
inline BOOL DocGetModelNumber()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_bModelNumber : FALSE; 
}

inline void DocSetModelNumber(BOOL bTrue)
{
	TArchPerDocData *p = GetCurDocData();
	if (p) 
	{
		p->m_bModelNumber = bTrue; 
	}
}

inline BOOL DocGetIsLispCommand()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? p->m_bLispCommand : FALSE;
}

inline const TCHAR * DocGetCurCommand()
{
	TArchPerDocData *p = GetCurDocData();
	return p ? (const TCHAR *)p->m_sCurCommand : NULL;
}
inline resbuf *AxisMask() 
{
	return ads_buildlist(RTDXF0, _T("LINE,ARC,CIRCLE"), 8, LAY_AXIS, NULL);
}

#endif