#pragma once
#include "nodePrototype.h"

enum EquipType
{
	eCommon = -1,	 // 普通设备
	eHydrant = 0,	 // 消火栓
	eSprinkler = 1,  // 喷头
	eWell = 2,		 // 井
	ePump = 3,		 // 水泵
	eGully = 4,		 // 雨水口
	eSizeJoint = 5,	 // 大小接头
};

// 设备
class CDbEquipment : public CDbPipeNode
{
public:
	ACRX_DECLARE_MEMBERS(CDbEquipment);
private:
	static const Adesk::UInt8 g_nVersion;
public:
	CDbEquipment();
protected:
	AcDbHardPointerId m_idBlock2d;// 二维图块
	AcDbHardPointerId m_idBlock3d;// 三维图块
	Adesk::UInt8	m_nMirror;	// 图块镜像
	XVector3D	m_vtDirection;	// 设备方向
	XPoint		m_ptLocation;	// 设备基点
	XPoint      m_ptInsert;		// 图块的基点 
	XString		m_sSysBlock;	// 系统图块, 如果是检查井，这里存放井编号
	double		m_dScale;		// 图块显示比例
	double      m_dPipeLength;  // 设备上未生成立管的长度,仅存储该值, 如果是检查井，这里存放井底标高
	double      m_dDang;		// 当量值, 如果是检查井，这里存放井地面标高
	BOOL		m_bHidePipe;	// 是否遮挡管线
	double      m_dCircleRadius;// 如果是圆设备，记录圆半径，遮挡管线用
	double      m_dYScale;
	double      m_dZScale;
	double      m_dSpare;       // 保留
	BOOL        m_bAutoScale;   // 8.0数据，例如消火栓不需要随图纸比例放大缩小

public:
	void SetDang(double dDang) {
		assertWriteEnabled();
		m_dDang = dDang;
	}
	double GetDang() const {
		return m_dDang;
	}
	void SetInsert(XPoint pt) {
		assertWriteEnabled();
		m_ptInsert = pt;
	}
	const XPoint & GetInsert() const {
		return m_ptInsert;
	}
	void SetHidePipe(BOOL bFlag = TRUE) {
		assertWriteEnabled();
		m_bHidePipe = bFlag;
	}
	void SetAutoScale(BOOL bFlag = TRUE) {
		assertWriteEnabled();
		m_bAutoScale = bFlag;
	}
	void SetScale(double dScale = 1.0) {
		assertWriteEnabled();
		m_dScale = dScale;
	}
	double GetScale() const {
		return m_dScale;
	}
	void SetLocation(const XPoint &pt) {
		assertWriteEnabled();
		if (!m_ptLocation && !m_ptInsert)
			m_ptInsert = pt;
		m_ptLocation = pt;
	}
	AcDbObjectId GetBlock2d() const {
		return m_idBlock2d;
	}
	void SetBlock2d(const AcDbObjectId &id) {
		assertWriteEnabled();
		m_idBlock2d = id;
	}
	AcDbObjectId GetBlock3d() const {
		return m_idBlock3d;
	}
	void SetBlock3d(const AcDbObjectId &id) {
		assertWriteEnabled();
		m_idBlock3d = id;
	}
	const TCHAR* GetSysBlock() const {
		return (const TCHAR*)m_sSysBlock;
	}
	void SetSysBlock(const TCHAR *szLab) {
		assertWriteEnabled();
		m_sSysBlock = szLab;
	}
	XVector3D GetDirection() const {
		return m_vtDirection;
	}
	double GetAngle() const {
		return ads_angle(XPoint(), m_vtDirection);
	}
	void SetDirection(const XVector3D &vt) {
		assertWriteEnabled();
		m_vtDirection = vt;
	}
	void SetAngle(double dAngle) {
		SetDirection(XVector3D(cos(dAngle), sin(dAngle), 0));
	}
	double GetPipeLength() const {
		return m_dPipeLength;
	}
	void SetPipeLength(double dLen) {
		assertWriteEnabled();
		m_dPipeLength = dLen;
	}
	void SetYScale(double dYScale) {
		assertWriteEnabled();
		m_dYScale = dYScale;
	}
	void SetZScale(double dZScale) {
		assertWriteEnabled();
		m_dZScale = dZScale;
	}
	void SetSpare(double dSpare) {
		assertWriteEnabled();
		m_dSpare = dSpare;
	}
	double GetSpare() const { return m_dSpare; }
	double GetYScale() const { return m_dYScale; }
	double GetZScale() const { return m_dZScale; }

	// 设备(图块)X、Y轴的镜像，X轴方向为m_vtDirection方向
	void MirrorByX(BOOL bFlag = TRUE);
	void MirrorByY(BOOL bFlag = TRUE);
	BOOL IsMirrorByX() const {
		return (m_nMirror & MIRROR_XAXIS) != 0;
	}
	BOOL IsMirrorByY() const {
		return (m_nMirror & MIRROR_YAXIS) != 0;
	}
	BOOL IsAutoScale() const { return m_bAutoScale; }
	// cet 2011.01.28 add
	BOOL IsSprinkler() const;
	// cet 2011.01.28 add
	BOOL IsHydrant() const;
	// cet 2014.12.2 add 设备类型（包含设备派生的子类）
	// 避免以父类的方式打开时无法区分类型 -1 普通设备
	// 0 消火栓 1 喷头 2 井 3 水泵 4 雨水口
	// 5 大小接头 
	void SetEquipmentType(int nType);
	void SetEquipmentType(EquipType nType);
	int GetEquipmentType() const;

public:
	// 图块插入比例
	AcGeScale3d GetInsertScale() const;

public: // Override TDbPipeNode
	virtual XPoint GetLocation() const { return m_ptLocation; }
	// 判断节点是否遮挡管线
	virtual BOOL IsHidePipe() const { return m_bHidePipe; }
	// 节点的宽度
	virtual double GetWidth(const CDbPipePrototype* pPipe = NULL) const;
	// 对st类型的接口进行重新连接
	virtual void UpdateLinkage(const XPoint &ptAt, TPipeSys::SysType st,
		const DList<AcDbObjectId> &idPipes);
	// 判断节点是否可以连接管段. nPos: 0--start; 1--end
	virtual BOOL CanLinkSide(const AcDbObjectId &idPipe, int nPos) const;
	virtual BOOL IsDrawBlock() const { return TRUE; }

public: // Override TDbEntity
	virtual void CopyPropertiesFrom(AcDbEntity *pSrc, unsigned gMatchFlag);
	//virtual Acad::ErrorStatus subGetClassID(CLSID* pClsid) const;
	virtual Acad::ErrorStatus GetGripText(int idx, CString &cs) const;
	virtual Acad::ErrorStatus Draw2d(AcGiDraw &dc) const;
	virtual Acad::ErrorStatus Draw3d(AcGiDraw &dc) const;
	virtual void GetTips(DList<ObjInfoUnit> &) const; //取动态属性显示数据
	virtual Acad::ErrorStatus GetExtents(XPoint &ptLow, XPoint &ptUp) const;
	virtual int GetFirstVersion()const { return 6; }
	// 2008-2-27 add
	virtual bool IsMeClip()const
	{
		//	if(IsHidePipe())  // 2009.7.21 sr 关闭裁剪，速度很慢 
		//		return true;
		//	else
		return false;
	}//ok, 是否去裁剪 
	virtual Acad::ErrorStatus GetClipBoundary(XPoly2D &poly)const;

public:	// Override AcDbEntity
	Acad::ErrorStatus subGetOsnapPoints(AcDb::OsnapMode	osnapMode,
		INT_PTR				gsSelectionMark,
		const AcGePoint3d&	ptPick,
		const AcGePoint3d&	lastPoint,
		const AcGeMatrix3d&	viewXform,
		AcGePoint3dArray&	snapPoints,
		AcDbIntArray&		geomIds) const;
	virtual Acad::ErrorStatus dwgInFields(AcDbDwgFiler*);
	virtual Acad::ErrorStatus dwgOutFields(AcDbDwgFiler*) const;
	virtual Acad::ErrorStatus dxfInFields(AcDbDxfFiler*);
	virtual Acad::ErrorStatus dxfOutFields(AcDbDxfFiler*) const;
	virtual Acad::ErrorStatus subGetGripPoints(AcGePoint3dArray&     gripPoints,
		AcDbIntArray&  osnapModes,
		AcDbIntArray&  geomIds) const;
	virtual Acad::ErrorStatus   subGetStretchPoints(AcGePoint3dArray & stretchPoints) const;
	virtual  Acad::ErrorStatus subMoveGripPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);
	virtual  Acad::ErrorStatus subMoveStretchPointsAt(const AcDbIntArray& indices,
		const AcGeVector3d& offset);
	virtual Acad::ErrorStatus subTransformBy(const AcGeMatrix3d& xform);

private:
	Acad::ErrorStatus MoveGSPointsAt(const AcDbIntArray& indices, const AcGeVector3d& offset);
	Acad::ErrorStatus _ExplodeOrDraw2d(AcGiDraw &dc, BOOL bZEqual0 = TRUE) const;
	BOOL IsUpLinkHydrant() const; // cet 2011.12.29 add
	Acad::ErrorStatus ExplodeOrDrawPipe3d(AcGiDraw &dc) const; // cet 2011.12.29 add
};