#include "stdafx.h"


// No Msg file is required
TARCH_IMPEXP void VpLayerFreeze3D();
TARCH_IMPEXP void VpLayerFreeze2D();
TARCH_IMPEXP int UpdatDisp();
//TARCH_IMPEXP void UpdateTDbEntity();

/*
TARCH_IMPEXP int ShowQ()
{
    AssureTileMode(0);
    DocSetDrawMode(DRAW_3D);
    UpdatDisp();
    DocSetDrawMode(DRAW_2D);
    UpdateTDbEntity();
    return RTNORM;
}
*/
// Command: 显示2D
TARCH_IMPEXP int Show2D()
{
    int nTileMode=0;
    VERIFY(xg_getvar(_T("TILEMODE"), &nTileMode)==RTNORM);
    DocSetDrawMode(DRAW_2D);
    UpdateTDbEntity();
    XSymbolList lstLayers(_T("LAYER"), _T("3D*"));
    for(int i=0; i<lstLayers.Length(); i++)
        AssureLayer(lstLayers[i], LAYSTAT_FREEZE);
    XSymbolList lstLayers1(_T("LAYER"), _T("2D*"));
    for(i=0; i<lstLayers1.Length(); i++)
        AssureLayer(lstLayers1[i], LAYSTAT_ON|LAYSTAT_THAW);
   return RTNORM;
}


TARCH_IMPEXP int ShowStd()
{
    int nTileMode=0;
    VERIFY(xg_getvar(_T("TILEMODE"), &nTileMode)==RTNORM);
    DocSetDrawMode(DRAW_2D+DRAW_3D);
    UpdateTDbEntity();
    return RTNORM;
}

// Command: 显示3D
TARCH_IMPEXP int Show3D()
{
    int nTileMode=0;
    VERIFY(xg_getvar(_T("TILEMODE"), &nTileMode)==RTNORM);
    DocSetDrawMode(DRAW_3D);
    UpdateTDbEntity();
    XSymbolList lstLayers(_T("LAYER"), _T("2D*"));
    for(int i=0; i<lstLayers.Length(); i++)
        AssureLayer(lstLayers[i], LAYSTAT_FREEZE);
    XSymbolList lstLayers1(_T("LAYER"), _T("3D*,3T*"));
    for(i=0; i<lstLayers1.Length(); i++)
        AssureLayer(lstLayers1[i], LAYSTAT_ON|LAYSTAT_THAW);
    return RTNORM;
}


TARCH_IMPEXP int  GetDwgToWrite(TCHAR * fullName, const TCHAR *pszPlus, const TCHAR *title=NULL)
{
    resbuf result;
    XString dwgPrefix(256);
    result.resval.rstring=NULL;
    xg_getvar(_T("DWGPREFIX"), dwgPrefix);
    if(pszPlus) {
        TCHAR szDwgName[80]=_T("");
        AT_GetCurDwg(szDwgName);
        dwgPrefix << szDwgName << pszPlus;
    }
    int rc = ads_getfiled((title? title:_T("输入文件名")), dwgPrefix, _T("DWG"), 1, &result);
    if(rc==RTNORM) {
       _tcscpy(fullName, result.resval.rstring);
       free(result.resval.rstring);
    }
    return rc;
}







//////////////////////////////////////////////////////////////
// command: 裁剪生成详图
// 用Dview剖切
// Status: 如果三维图层没有打开,则剖面图可能出现不了这些实体
// 必须在WCS下
/*
int ClipDetail()
{
    AsureWCS();
    TCHAR fullName[80]=_T("");
    if(StartAnotherDwg()!=RTNORM || GetDwgToWrite(fullName, NULL, _T("输入文件名"))!=RTNORM)
       return RTERROR;

    XPoint ptLow, ptUp;
    if(XGetPoint(NULL, _T("\n第一个角点: "), ptLow)!=RTNORM ||
        ads_getcorner(ptLow, _T("\n另一个角点: "), ptUp)!=RTNORM)
        return RTERROR;

    XPushVar<int> expert(_T("EXPERT"), 2);
    ads_command(RTSTR, _T("SAVEAS"), RTSTR, _T(""), RTSTR, fullName, NULL);

    PickSet ss(SS_FREE);
    if(ss.Get("C", ptLow, ptUp)==RTNORM) {
        PickSet ssAll(SS_FREE);
        ssAll.Get("X");
        ssAll -= ss;

        PickSet ssVp(SS_FREE);
        if(ssVp.Get("X", NULL, NULL, RBList(RTDXF0, "VIEWPORT", NULL))==RTNORM)
            ssAll -= ssVp;

        ssAll.Erase();

       
        PickSet ssExplode(SS_FREE);
        long lCount=ss.Length();
        for(long i=0L; i<lCount; i++) {
            Entity ent=ss[i];
            XDbObject obj(ent, AcDb::kForRead);
            if(!obj) continue;
            TDbEntity *pEnt1=TDbEntity::cast(obj.m_pObject);
            TDbCurveEntity *pEnt2=TDbCurveEntity::cast(obj.m_pObject);
            if(pEnt1 || pEnt2) {
                AcDbVoidPtrArray entSet;
                XExplodeStream dc(entSet);
                if(pEnt1) {
                    if(pEnt1->ExplodeOrDraw2d(dc)==Acad::eInvalidInput)
                        pEnt1->explode(entSet);
                    ssExplode += ent;
                } else if(pEnt2) {
                    if(pEnt2->ExplodeOrDraw2d(dc)==Acad::eInvalidInput)
                        pEnt2->explode(entSet);
                    ssExplode += ent;
                }
                long lNum=entSet.length();
                for(long j=0L; j<lNum; j++) {
                    AcDbEntity * pDbEnt=(AcDbEntity *)entSet[j];
                    ASSERT(pDbEnt);
                    AddToModelSpace(pDbEnt, Adesk::kTrue);
                }
            }
        }
        ssExplode.Erase();

        ptLow.z=ptUp.z=0;
        XRectAngle box(ptLow, ptUp);
        XPoly2D poly(1);
        poly.AppendNode(box.GetLowLeft());
        poly.AppendNode(box.GetLowRight());
        poly.AppendNode(box.GetUpRight());
        poly.AppendNode(box.GetUpLeft());

        RBList fence=ads_buildlist(RT3DPOINT, &box.GetLowLeft(),
            RT3DPOINT, &box.GetLowRight(),
            RT3DPOINT, &box.GetUpRight(),
            RT3DPOINT, &box.GetUpLeft(),
            RT3DPOINT, &box.GetLowLeft(), NULL);


        PickSet ssForClip(SS_FREE), ssIn(SS_FREE), ssOut(SS_FREE);
        if(ssForClip.Get("F", fence, NULL, NULL)==RTNORM) {
            PolyClip(ssForClip, poly, ssIn, ssOut);
            if(!!ssOut)
                ssOut.Erase();
        }
    }

   
    ads_command(RTSTR, ".QSAVE", NULL);
    return RTNORM;
}

// command: 改变高度
int ChgElevation()
{
   PickSet ss(SS_FREE);
   if(SelectEntities("\n请选择要移动的实体!", ss, RBList(RTDXF0, "*", NULL))!=RTNORM) return RTERROR;

   ads_real dist;
   if(ads_getdist(NULL, "\n请输入垂直方向的移动距离(>0:往上; <0:往下): ", &dist)==RTNORM) {
      XPoint base, result(0,0,dist);
      XPushVar<int> vOsMode("OSMODE", 0);
      ads_command(RTSTR, ".MOVE", RTPICKS, (long *)ss, RTSTR, "",
                  RT3DPOINT, &base, RT3DPOINT, &result, NULL);
   }
   return RTNORM;
}

*/