#ifndef _TEImpCabTee_H__
#define _TEImpCabTee_H__

#if _MSC_VER > 1000
#pragma once
#endif

#include "TImpSpecFitting.h"

class TEImpCabTee : public TImpSpecFitting    
{
public:
	TEImpCabTee();
	virtual ~TEImpCabTee();			 
public:

	// 接口描述对象
	virtual int GetInterfaceCount() const;

	virtual BOOL GetInterface(int nIndex,TInterface& pipeInterface) const;	
	virtual BOOL GetInterface(const AcGePoint3d& ptCon,TInterface& pipeInterface) const;
	
	virtual BOOL HasInterface(const AcGePoint3d& ptCon,const AcGeVector3d& vtDir);
	
	// 建立接口关联关系
	virtual BOOL SetInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	
	// 移除接口关联关系
	virtual BOOL RemoveInterfaceRelation(const AcGePoint3d& ptConnect,const AcDbObjectId& idConnect);
	
	// 接口更改通知
	virtual BOOL NotifyInterfaceToModify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	virtual TDb::Position ExplainGripIndex(int nIndex) const;
	
	virtual void GetKindName(CString& sName);
	
	//获取三维的壳对象
	virtual int GetXBaseShell(TXShell& xShell);
	
	//获取体的范围方块
	virtual int GetBodyBox(AcDbExtents& ext);
	
	virtual CString GetXml() const;
	virtual CString GetXml(const AcGeMatrix3d& mat) const;

	// add by 2011.02.21 剖切功能 注意 GetSection内不应将std::vector<TObjSectionRecord>参数清空
	virtual bool GetSection(const AcDbFace &face, const AcGeVector3d &vtPlaneSecDir, 
		std::vector<TObjSectionRecord> &sectionRecord, AcDbVoidPtrArray& arFillPtrs) const;

	// 剖切用，返回Z坐标最高、最低点
	virtual Acad::ErrorStatus GetExtents(TADSGePoint3d &ptLow, TADSGePoint3d &ptUp) const;
	
public:
	virtual BOOL MakeCurves(TComplexCurve& cplCurve) const;
	virtual BOOL GetCurvesInSide(TComplexCurve& compCurve) const;
	
	virtual AcDbPolyline* MakePolyCurve() const;
	virtual BOOL MakePolyCurveFaces(AcDbVoidPtrArray& arFaces);

	BOOL NoneConectLineIfNeed(TComplexCurve& cplCurve) const;
	
	virtual void GetTips(CMapStringToString& mapLable2Tip) const;

public:
	//{{AFX_ARX_METHODS(TDbImpCabElbow)
	virtual Acad::ErrorStatus ExplodeOrDraw2d(XExplodeDraw &mode) const;
    virtual Acad::ErrorStatus ExplodeOrDraw3d(XExplodeDraw &mode) const;
	
	virtual Acad::ErrorStatus transformBy(const AcGeMatrix3d& xform);

	virtual Acad::ErrorStatus moveStretchPointsAt(const AcDbIntArray& indices,
												  const AcGeVector3d& offset);
	virtual Acad::ErrorStatus moveGripPointsAt(const AcDbIntArray& indices,
											   const AcGeVector3d& offset);

	virtual Acad::ErrorStatus getStretchPoints(AcGePoint3dArray& stretchPoints) const;
	virtual Acad::ErrorStatus getGripPoints(AcGePoint3dArray& gripPoints,
											AcDbIntArray& osnapModes,
											AcDbIntArray& geomIds) const;
	virtual Acad::ErrorStatus getOsnapPoints(AcDb::OsnapMode osnapMode,
											INT_PTR gsSelectionMark,
											const AcGePoint3d& pickPoint,
											const AcGePoint3d& lastPoint,
											const AcGeMatrix3d& viewXform,
											AcGePoint3dArray& snapPoints,
											AcDbIntArray& geomIds) const;
	virtual void list() const;	
	virtual Acad::ErrorStatus getClassID(CLSID* pClsid) const;
	//}}AFX_ARX_METHODS
	
protected:
	
	static void FreeBuffer(AcDbVoidPtrArray& arCurves);
	
	// 夹点移动消息处理
	BOOL OnMoveGripPointMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	// 对象移动消息处理
	BOOL OnTransformByMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);
	
	// 尺寸调整消息处理
	BOOL OnSizeMsgNotify(const TInterfaceModifyMsg& iModiMsg,TInterfaceModifyMsgs& iModiMsgs);


	void GetEqualRTVExtents(DList<XPoly2D>& polyLst) const;

	void GetEqualTSideVExtents(DList<XPoly2D>& polyLst) const;

	void GetEqualTopSideVExtents(DList<XPoly2D>& polyLst) const;

	void GetEqualRMidVExtents(DList<XPoly2D>& polyLst) const;

	// 下角垂直等径三通 add by wzh 2012/10/16 null
	void GetEqualRBAngVExtents(DList<XPoly2D>& polyLst) const; 


private:
	Acad::ErrorStatus OnCEqualRMoveGripPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset);

	// 获取垂足点
	BOOL GetVerticalFootPoint(const AcGePoint3d& pickPoint,
							  const AcGePoint3d& lastPoint,
							  AcGePoint3d& ptVerFoot) const;
	
	BOOL GetTeeMidLine(TComplexCurve& compCurve) const;

	// 获取最近点
	BOOL GetNearestPoint(const AcGePoint3d& pickPoint,
						 AcGePoint3d& ptNear) const;
	
	// 槽式水平等径
	void EqualHVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualHVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	void EqualHMakeCurvesNorY(TComplexCurve& cplCurve,int& nNum) const;
	void EqualHMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualHVMakeCurvesIgnore(TComplexCurve& cplCurve,int& nNum) const; // 斜向水平等径三通 add by wzh 2012/11/12
	
	// 槽式上垂直等径
	void EqualUpVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpVMakeCurvesNorY(TComplexCurve& cplCurve,int& nNum) const;
	
	// 槽式下垂直等径
	void EqualBotVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualBotVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualBotVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	
	// 槽式上边垂直等径
	void EqualTopSideVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualTopSideVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	void EqualTopSideVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualTopSideVMakeCurvesNorY(TComplexCurve& cplCurve,int& nNum) const;
	
	// 槽式下边垂直等径三通
	void EqualDSideVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualDSideVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	void EqualDSideVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualDSideVMakeCurvesNorY(TComplexCurve& cplCurve,int& nNum) const;
	
	// 槽式上边中间垂直等径
	void EqualUpMidVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpMidVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpMidVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpOrBMidVMakeCurvesNorY(TComplexCurve& cplCurve,int& nNum) const;

	// 槽式下边中间垂直等径
	void EqualBMidVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
 	void EqualBMidVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
 	void EqualBMidVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;

	// 槽式上角垂直等径三通 2012/10/23 add by wzh NULL
	void EqualUpAngleVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpAngleVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpAngleVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualUpAngleVMakeCurvesNorY(TComplexCurve& cplCurve,int& nNum) const;

	// 槽式下角垂直等径三通 2012/10/23 add by wzh 
	void EqualDAngleVMakeCurvesNor(TComplexCurve& cplCurve,int& nNum) const;
	void EqualDAngleVMakeCurvesNorZ(TComplexCurve& cplCurve,int& nNum) const;
	void EqualDAngleVMakeCurvesNorX(TComplexCurve& cplCurve,int& nNum) const;
	void EqualDAngleVMakeCurvesNorY(TComplexCurve& cplCurve,int& nNum) const;

	Acad::ErrorStatus ExplodeOrDraw3dOfP(XExplodeDraw &mode) const;		
	Acad::ErrorStatus ExplodeOrDraw3dOfC(XExplodeDraw &mode) const;	
	Acad::ErrorStatus ExplodeOrDraw3dOfT(XExplodeDraw &mode) const;	

	// 三通绘制
	// 槽式
	void EqualRHVExplodeOrDraw3d(XExplodeDraw &mode) const;				// 槽式 水平垂直等径三通 
	void EqualRHIgnoreExplodeOrDraw3d(XExplodeDraw &mode) const;		// 槽式 斜向水平等径三通 2012/11/12 add by wzh

	void EqualTSideVExplodeOrDraw3d(XExplodeDraw &mode) const;			// 槽式 上边垂直等径三通 
	void EqualDSideVExplodeOrDraw3d(XExplodeDraw &mode) const;			// 槽式 下边垂直等径三通 

	void EqualRTVExplodeOrDraw3d(XExplodeDraw &mode) const;				// 槽式 上垂直等径三通 
	void EqualRBVExplodeOrDraw3d(XExplodeDraw &mode) const;				// 槽式 下垂直等径三通 

	void EqualTopSideVExplodeOrDraw3d(XExplodeDraw &mode) const;		// 槽式 上边中间垂直等径三通 
	void EqualRMidVExplodeOrDraw3d(XExplodeDraw &mode) const;			// 槽式 下边中间垂直等径三通

	void EqualRTAngleVExplodeOrDraw3d(XExplodeDraw &mode) const;		// 槽式 上角垂直等径三通 add by wzh 2012-10-23 NULL
	void EqualRBAngleVExplodeOrDraw3d(XExplodeDraw &mode) const;		// 槽式 下角垂直等径三通 add by wzh 2012-10-23

	// 梯式
	void EqualRHVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;			// 梯式 水平等径
	void EqualRHIgnoreExplodeOrDraw3dOfT(XExplodeDraw &mode) const;		// 梯式 斜向水平等径三通 2012/11/12 add by wzh

	void EqualRTVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;			// 梯式 上垂直等径三通
	void EqualRBVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;			// 梯式 下垂直等径三通

	void EqualTopSideVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;		// 梯式 上边垂直等径三通
	void EqualDSideVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;		// 梯式 下边垂直等径三通

	void EqualTSideVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;		// 梯式 上边中间垂直等径三通
	void EqualRMidVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;		// 梯式 下边中间垂直等径三通

	void EqualRTAngleVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;		// 梯式 上角垂直等径三通 add by wzh 2012-10-23 NULL
	void EqualRBAngleVExplodeOrDraw3dOfT(XExplodeDraw &mode) const;		// 梯式 下角垂直等径三通 add by wzh 2012-10-23 NULL


	//////////

	
	void DrawCube(XExplodeDraw &mode,const AcGeVector3d &vtDir, const AcGePoint3dArray &ptArr, double dThick) const;

	// MakePolyCurve
	void MakePolyCurveOfHEqlR(AcDbPolyline*& pPl) const;			// 槽式 水平等径

	void MakePolyCurveOfUMidEqlR(AcDbPolyline*& pPl) const;		// 槽式 上边中间垂直等径三通
	void MakePolyCurveOfBMidEqlR(AcDbPolyline*& pPl) const;		// 槽式 下边中间垂直等径三通

	void MakePolyCurveOfTVerEqlR(AcDbPolyline*& pPl) const;		// 槽式 上垂直等径三通
	void MakePolyCurveOfBVerEqlR(AcDbPolyline*& pPl) const;		// 槽式 下垂直等径三通

	void MakePolyCurveOfTSidEqlR(AcDbPolyline*& pPl) const;		// 槽式 下边垂直等径三通
	void MakePolyCurveOfBSidEqlR(AcDbPolyline*& pPl) const;		// 槽式 上边垂直等径三通

	void MakePolyCurveOfUAngEquR(AcDbPolyline*& pPl) const;		// 槽式 上角垂直等径三通	add by wzh 2012-10-23 NULL
	void MakePolyCurveOfBAngEquR(AcDbPolyline*& pPl) const;		// 槽式 下角垂直等径三通	add by wzh 2012-10-23


	// MakePolyCurveFaces
	void MakePolyCurveFacesOfHEqlR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfHEqlRXY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfHEqlRZ(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfHEqlRIgnore(AcDbVoidPtrArray& arFaces); // 斜向水平等径三通 add by wzh 2012/11/12

	void MakePolyCurveFacesOfUMidEqlR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfUMidEqlRX(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfUMidEqlRY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfUMidEqlRZ(AcDbVoidPtrArray& arFaces);

	void MakePolyCurveFacesOfBMidEqlR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBMidEqlRX(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBMidEqlRY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBMidEqlRZ(AcDbVoidPtrArray& arFaces);

	void MakePolyCurveFacesOfTVerEqlR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfTVerEqlRXY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfTVerEqlRZ(AcDbVoidPtrArray& arFaces);

	void MakePolyCurveFacesOfBVerEqlR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBVerEqlRXY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBVerEqlRZ(AcDbVoidPtrArray& arFaces);

	void MakePolyCurveFacesOfTSidEqlR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfTSidEqlRX(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfTSidEqlRY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfTSidEqlRZ(AcDbVoidPtrArray& arFaces);

	void MakePolyCurveFacesOfBSidEqlR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBSidEqlRX(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBSidEqlRY(AcDbVoidPtrArray& arFaces);

	// 上角垂直等径三通	add by wzh 2012-10-23 NULL
	void MakePolyCurveFacesOfUAngEquR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfUAngEquRX(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfUAngEquRY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfUAngEquRZ(AcDbVoidPtrArray& arFaces);

	// 下角垂直等径三通	add by wzh 2012-10-23
	void MakePolyCurveFacesOfBAngEquR(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBAngEquRX(AcDbVoidPtrArray& arFaces);//?
	void MakePolyCurveFacesOfBAngEquRY(AcDbVoidPtrArray& arFaces);
	void MakePolyCurveFacesOfBAngEquRZ(AcDbVoidPtrArray& arFaces);

	//GetOsnapPoints
	void GetOsnapPointsOfHEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;
	void GetOsnapPointsOfUMidEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;
	void GetOsnapPointsOfBMidEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;
	void GetOsnapPointsOfTVerEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;
	void GetOsnapPointsOfBVerEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;
	void GetOsnapPointsOfTSidEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
							    AcDbIntArray& geomIds) const;		
	void GetOsnapPointsOfBSidEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;		
	void GetOsnapPointsOfUAngEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;		// 上角垂直等径三通	add by wzh 2012-10-23 NULL
	void GetOsnapPointsOfBAngEqlR(AcDb::OsnapMode osnapMode,
								INT_PTR gsSelectionMark,
								const AcGePoint3d& pickPoint,
								const AcGePoint3d& lastPoint,
								const AcGeMatrix3d& viewXform,
								AcGePoint3dArray& snapPoints,
								AcDbIntArray& geomIds) const;		// 下角垂直等径三通	add by wzh 2012-10-23o

	//GetCurvesInSide
	void GetCurvesInSideOfHEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfHEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfHEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfHEqlRZ(TComplexCurve& cplCurve) const;

	void GetCurvesInSideOfUMidEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfUMidEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfUMidEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfUMidEqlRZ(TComplexCurve& cplCurve) const;

	void GetCurvesInSideOfBMidEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBMidEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBMidEqlRZ(TComplexCurve& cplCurve) const;

	void GetCurvesInSideOfTVerEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfTVerEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfTVerEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfTVerEqlRZ(TComplexCurve& cplCurve) const;

	void GetCurvesInSideOfBVerEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBVerEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBVerEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBVerEqlRZ(TComplexCurve& cplCurve) const;

	void GetCurvesInSideOfTSidEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfTSidEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfTSidEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfTSidEqlRZ(TComplexCurve& cplCurve) const;

	void GetCurvesInSideOfBSidEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBSidEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBSidEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBSidEqlRZ(TComplexCurve& cplCurve) const;

	// 上角垂直等径三通	add by wzh 2012-10-23 NULL
	void GetCurvesInSideOfUAngEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfUAngEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfUAngEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfUAngEqlRZ(TComplexCurve& cplCurve) const;

	// 下角垂直等径三通	add by wzh 2012-10-23o
	void GetCurvesInSideOfBAngEqlR(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBAngEqlRX(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBAngEqlRY(TComplexCurve& cplCurve) const;
	void GetCurvesInSideOfBAngEqlRZ(TComplexCurve& cplCurve) const;
	

private:
	void FormatPolyline(AcDbPolyline*& pPl,TComplexCurve& cplCurve,int nNum) const;
	void FormatArcPolyline(AcDbPolyline*& pPl,TComplexCurve& cplCurve,int nNum) const;
	AcDbFace* CreateAcDbFace(const AcGePoint3d& pt1,
							 const AcGePoint3d& pt2,
							 const AcGePoint3d& pt3,
							 const AcGePoint3d& pt4);
	BOOL CreateAcDbArcFace(AcDbVoidPtrArray& arFaces,const AcGePoint3d& ptSta,const AcGePoint3d& ptEnd,const AcGePoint3d& ptMid);
	void CreateFaceByMesh(XExplodeDraw &mode,AcGePoint3d& pt1,AcGePoint3d& pt2,AcGePoint3d& pt3,AcGePoint3d& pt4) const;

	// 计算曲线中点
	AcGePoint3d GetPolyCurMidPoint(const AcGePoint3d& pt1,const AcGePoint3d& pt2,const AcGePoint3d& ptGeM) const;

	// 
	AcGePoint3d GetPolyCurMidPoint(const AcGePoint3d& pt1,const AcGePoint3d& pt2,const AcGePoint3d& ptBase, double dAngle) const;
	
	// 计算外切于两等距线的圆心, 用于拐角为单弧/双弧的斜向三通/四通 2012/11/16 add by wzh
	AcGePoint3d GetPolyCurveCentre(const AcGePoint3d& pt1,const AcGePoint3d& pt2,const AcGePoint3d& ptBase,double dAngle) const;


	BOOL GetIndexOfPointIsOn(TComplexCurve& cplCurv,const AcGePoint3d& ptOn,int& nIndex) const;

	CString GetCurrentTypeName() const;
	void AppendAcDbExtents(std::vector<AcGePoint3d>& vctpt,AcDbExtents& ext);

private:
	// 点
	int GetBodyBoxOfTHorEqualR(AcDbExtents& ext);
	int GetBodyBoxOfTVerEqualR(AcDbExtents& ext);
	int GetBodyBoxOfTDVerEqualR(AcDbExtents& ext);
	int GetBodyBoxOfTUSMVEqualR(AcDbExtents& ext);
	int GetBodyBoxOfTDMVEqualR(AcDbExtents& ext);
	int GetBodyBoxOfTDSVEqualR(AcDbExtents& ext);
	int GetBodyBoxOfTUSVEqualR(AcDbExtents& ext);
	int GetBodyBoxOfTUAVEqualR(AcDbExtents& ext);		// 上角垂直等径三通	add by wzh 2012-10-23 null
	int GetBodyBoxOfTBAVEqualR(AcDbExtents& ext);		// 下角垂直等径三通	add by wzh 2012-10-23

	// 外壳
	int GetXBaseShellOfTHorEqualR(TXShell& xShell);
	int GetXBaseShellOfTVerEqualR(TXShell& xShell);
	int GetXBaseShellOfTDVerEqualR(TXShell& xShell);
	int GetXBaseShellOfTUSMVerEqualR(TXShell& xShell);
	int GetXBaseShellOfTDSMVerEqualR(TXShell& xShell);
	int GetXBaseShellOfTDSVerEqualR(TXShell& xShell);
	int GetXBaseShellOfTUSVerEqualR(TXShell& xShell);
	int GetXBaseShellOfTUAVerEqualR(TXShell& xShell);	// 上角垂直等径三通	add by wzh 2012-10-23 null
	int GetXBaseShellOfTBAVerEqualR(TXShell& xShell);	// 下角垂直等径三通	add by wzh 2012-10-23


};

#endif //_TEImpCabTee_H__