#include "stdafx.h"
#include "CoreTools.h"
#include "encryption.h"
#include "AecDbWall.h"
#include "simpleproperty.h"
#include "KTCADUtilityEx.h"
#include "dbgrip.h"
#include "AecGripCback.h"
#include "KTSetting.h"
#include "AecDbX3dPartEntity.h"
#include "AecDbColumn.h"
#include "AecCoverBooleanOper.h"
#include "AecDbOpening.h"
#include "AecDbColumn.h"
#include "AecDbX3dPart.h"
#include "geometry2json.h"
#include "HlrCutOption.h"
#include "AecDbZLineXOpening.h"

extern CString IDCreate();
extern double PixelToWcs(int nPixel);
extern BOOL Is2DView();
extern AcGeVector3d GetUcsZvt();
extern void PushGripMessage(GripMessage&);

extern AcDbArc* FormatArc(const AcGePoint3d& ptGe1,const AcGePoint3d& ptGe2,const AcGePoint3d& ptGe3);
extern void transfromRegion(AcDbRegion *pRegion, const AcGePoint3d &ptOnRegion, const AcGeVector3d &vtNormal, const AcGePoint3d &ptOnPlan);
extern Acad::ErrorStatus AddToModelSpace(AcDbEntity* pEnt,AcDbDatabase* pDb = NULL,bool bClose = true);
extern AcGePoint3d MidPoint(const AcGePoint3d& pt1,const AcGePoint3d& pt2);
BOOL DLLIMPEXP GetDocScale(double& dPScale);
extern void DLLIMPEXP OrthoProjected3DSolid(AcDb3dSolid* pSolidClone,const AcGePlane& plan,AcGeMatrix3d& xformPlanToWorld,AcDbVoidPtrArray& arEntPtrs);
extern BOOL DLLIMPEXP GetDimGripOff();

static const Adesk::UInt16 kColorByBlock   = 0;
static const Adesk::UInt16 kRed            = 1;
static const Adesk::UInt16 kYellow         = 2;
static const Adesk::UInt16 kGreen          = 3;
static const Adesk::UInt16 kCyan           = 4;
static const Adesk::UInt16 kBlue           = 5;
static const Adesk::UInt16 kMagenta        = 6;
static const Adesk::UInt16 kWhite          = 7;
static const Adesk::UInt16 kColorByLayer   = 256;

Adesk::UInt32 AecDbXWall::kCurrentVersionNumber = 1;

static AcGePoint3d Mid(AcGePoint3d& ptGe1,AcGePoint3d& ptGe2)
{
	return AcGePoint3d( (ptGe1.x + ptGe2.x) / 2.0,
		(ptGe1.y + ptGe2.y) / 2.0,
		(ptGe1.z + ptGe2.z) / 2.0);
}
static void FreeBuffer(int n,AcDbVoidPtrArray& arEntPtrs)
{
	AcDbEntity* pEnt = NULL;
	while(arEntPtrs.length() > n )
	{
		pEnt = (AcDbEntity*)arEntPtrs.last();
		if (pEnt != NULL)
		{
			pEnt->erase();
			pEnt->close();
			arEntPtrs.removeLast();
			delete pEnt;
		}
	}
}

extern AcGePoint3d GetArcMidPoint(AcDbArc* pArc);
AcDbRegion* CreateRetangeRegion(AcGePoint3d* pPoints,int nSize)
{
	AcDbVoidPtrArray arCurPtrs;
	for (int i = 0;i < nSize-1;i++)//5
	{
		AcDbLine* pLine = new AcDbLine(pPoints[i],pPoints[i+1]);
		arCurPtrs.append(pLine);
	}

	AcDbVoidPtrArray arRegPtrs;
	AcDbRegion* pReg = NULL;
	if ( Acad::eOk == AcDbRegion::createFromCurves(arCurPtrs,arRegPtrs) )
	{
		//FREE
		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < arCurPtrs.length();i++)
		{
			pEnt = (AcDbEntity*)arCurPtrs.at(i);
			DELETE_PTR(pEnt);
		}
		return (AcDbRegion*)arRegPtrs.first();
	}

	//error FREE
	FreeBuffer(0,arCurPtrs);
	return NULL;
}

ACRX_DXF_DEFINE_MEMBERS (AecDbXWall, AecDbBDPipeBase,
						 AcDb::kDHL_CURRENT, AcDb::kMReleaseCurrent, 
						 AcDbProxyEntity::kNoOperation | AcDbProxyEntity::kDisableProxyWarning, 
						 AEC_DBWALL,
						 "AecDbXWall"
						 "|Product Desc:     shanghua earthworm app obj"
						 "|Company:          shanghua inc"
						 "|WEB Address:      www.shanghuasoft.com")

AecDbXWall::AecDbXWall(void)
{
	m_mapSpecXData.SetAt(KEY_2DSTYLE,2);
	m_mapSpecXData.SetAt(KEY_CENNODRAW,1);
	m_mapSpecXData.SetAt(KEY_NAME,_T("墙体"));
}

AecDbXWall::~AecDbXWall(void)
{
	
}

bool AecDbXWall::SetGradient(double dGradient)
{
	assertWriteEnabled();
	m_mapSpecXData.SetAt(KEY_GRAD,dGradient);
	return true;
}

double AecDbXWall::GetGradient() const
{
	assertReadEnabled();
	double dGradient = 0.0;
	m_mapSpecXData.GetAt(KEY_GRAD,dGradient);
	return dGradient;
}

bool AecDbXWall::SetAlign(int nAlgin)
{
	AssertWriteEnabled();
	m_mapSpecXData.SetAt(KEY_ALIGN,nAlgin);
	return true;
}

int AecDbXWall::GetAlign() const
{
	assertReadEnabled();
	int nAlgn = 0;
	m_mapSpecXData.GetAt(KEY_ALIGN,nAlgn);
	return nAlgn;
}

AcGePoint3d AecDbXWall::StartPoint() const
{
	assertReadEnabled();

	AcGePoint3d ptSta;
	getStartPoint(ptSta);

	return ptSta;
}

AcGePoint3d AecDbXWall::EndPoint() const
{
	assertReadEnabled();

	AcGePoint3d ptSta;
	getEndPoint(ptSta);

	return ptSta;
}

Acad::ErrorStatus AecDbXWall::subDeepClone(AcDbObject *pOwnerObject
	, AcDbObject *&pClonedObject
	, AcDbIdMapping &idMap
	, Adesk::Boolean isPrimary) const
{
	Acad::ErrorStatus es = AecDbBDPipeBase::subDeepClone(pOwnerObject, pClonedObject, idMap, isPrimary);
	if (es != Acad::eOk) return es;

	AcDb::DeepCloneType dt = idMap.deepCloneContext();
	if (dt == AcDb::kDcCopy
		|| dt == AcDb::kDcObjects
		|| dt == AcDb::kDcExplode
		|| dt == AcDb::kDcInsertCopy )
	{
		AecDbXWall* pClnWall = AecDbXWall::cast(pClonedObject);

		AcDbObjectId idVal;
		for (int i = 0; i < m_arAssocPartEntIds.length(); i++)
		{
			const AcDbSoftPointerId &idOpening = m_arAssocPartEntIds[i];
			if (!idOpening) continue;
			AcDbIdPair idPairOpening(idOpening, AcDbObjectId::kNull, false, isPrimary ? true : false);
			if (idMap.compute(idPairOpening))
			{
				if (pClnWall != NULL)
				{
					idVal = idPairOpening.value();
					if (!idVal.isNull())
					{
						pClnWall->m_arAssocPartEntIds.remove(idOpening);
						pClnWall->m_arAssocPartEntIds.append(idPairOpening.value());
						// 不管 clone 出的 opening 的id是否在pClnWall的m_arAssocPartEntIds内，都要把pClnWall的id放到 opening的KEY_IDCNT1里
						// ，保证co复制时关联关系不断
						AcDbObjectPointer<AecDbXOpening> pClnOpening(idPairOpening.value(), AcDb::kForWrite);
						if (pClnOpening.openStatus() == Acad::eOk)
						{
							if (pClnWall->id().isValid())
								pClnOpening->SetAt(KEY_IDCNT1, pClnWall->id());
						}
						AcDbObjectPointer<AecDbX3dPartEntity> pClnXPart(idPairOpening.value(), AcDb::kForWrite);
						if (pClnXPart.openStatus() == Acad::eOk)
						{
							if (pClnWall->id().isValid())
								pClnXPart->SetAt(KEY_ASSOIC, pClnWall->id());
						}
					}
				}
				continue;
			}
			AcDbObject *pSubObject = NULL;
			es = acdbOpenAcDbObject(pSubObject, idOpening, AcDb::kForRead);
			if (pSubObject != NULL)
			{
				AcDbObject *pClonedSubObject = NULL;
				pSubObject->deepClone(pOwnerObject, pClonedSubObject, idMap, isPrimary);

				if (pSubObject != pClonedSubObject)
				{
					pSubObject->close();
				}

				if (pClonedSubObject != NULL)
				{
					idVal = pClonedSubObject->objectId();
					if (!idVal.isNull() && pClnWall != NULL)
					{
						pClnWall->m_arAssocPartEntIds.remove(idOpening);
						pClnWall->m_arAssocPartEntIds.append(idVal);

						AecDbXOpening *pClnOpening = AecDbXOpening::cast(pClonedSubObject);
						if (pClnOpening)
						{
							pClnOpening->setOwnerId(pOwnerObject->id());
							if (pClnWall->id().isValid())
								pClnOpening->SetAt(KEY_IDCNT1, pClnWall->id());
						}
						AecDbX3dPartEntity *pClnXPart = AecDbX3dPartEntity::cast(pClonedSubObject);
						if (pClnXPart)
						{
							if (pClnWall->id().isValid())
								pClnXPart->SetAt(KEY_ASSOIC, pClnWall->id());
						}
					}
					pClonedSubObject->close();
				}
			}
		}
	}

	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::subWblockClone(AcRxObject* pOwnerObject,
										 AcDbObject*& pClonedObject,
										 AcDbIdMapping& idMap,
										 Adesk::Boolean isPrimary/* = true*/) const
{
	Acad::ErrorStatus es = AecDbBDPipeBase::subWblockClone(pOwnerObject, pClonedObject, idMap, isPrimary);
	if (es != Acad::eOk) return es;

	AcDb::DeepCloneType dt = idMap.deepCloneContext();
	if (dt == AcDb::kDcCopy ||
		dt == AcDb::kDcObjects ||
		dt == AcDb::kDcWblock ||
		dt == AcDb::kDcWblkObjects)
	{
		AecDbXWall* pClnWall = AecDbXWall::cast(pClonedObject);
		
		AcDbObjectId idVal;
		for (int i = 0; i < m_arAssocPartEntIds.length(); i++)
		{
			const AcDbSoftPointerId &idOpening = m_arAssocPartEntIds[i];
			if (!idOpening) continue;
			AcDbIdPair idPairOpening(idOpening, AcDbObjectId::kNull, false, isPrimary ? true : false);
			if (idMap.compute(idPairOpening))
			{
				if (pClnWall != NULL)
				{
					idVal = idPairOpening.value();
					if (!idVal.isNull())
					{
						int nFt = -1;
						if (!pClnWall->m_arAssocPartEntIds.find(idVal,nFt))
						{
							pClnWall->m_arAssocPartEntIds.append(idPairOpening.value());
						}
						// 不管 clone 出的 opening 的id是否在pClnWall的m_arAssocPartEntIds内，都要把pClnWall的id放到 opening的KEY_IDCNT1里
						// ，保证co复制时关联关系不断
						AcDbObjectPointer<AecDbXOpening> pClnOpening(idPairOpening.value(), AcDb::kForWrite);
						if (pClnOpening.openStatus() == Acad::eOk)
						{
							if (pClnWall->id().isValid())
								pClnOpening->SetAt(KEY_IDCNT1, pClnWall->id());
						}
					}
				}
				continue;
			}

			AcDbObject *pSubObject = NULL;
			acdbOpenAcDbObject(pSubObject, idOpening, AcDb::kForRead);
			if (pSubObject != NULL)
			{
				AcDbObject *pClonedSubObject = NULL;
				pSubObject->wblockClone(pOwnerObject, pClonedSubObject, idMap, isPrimary);

				if (pSubObject != pClonedSubObject)
				{
					pSubObject->close();
				}

				if (pClonedSubObject != NULL)
				{
					idVal = pClonedSubObject->objectId();
					if (!idVal.isNull() && pClnWall != NULL)
					{
						int nFt = -1;
						if (!pClnWall->m_arAssocPartEntIds.find(idVal, nFt))
						{
							pClnWall->m_arAssocPartEntIds.append(idVal);
						}

						AecDbXOpening *pClnOpening = AecDbXOpening::cast(pClonedSubObject);
						if (pClnOpening)
						{
							if (pClnWall->id().isValid())
								pClnOpening->SetAt(KEY_IDCNT1, pClnWall->id());
						}

					}
					pClonedSubObject->close();
				}
			}
		}
	}
	return Acad::eOk;
}

bool AecDbXWall::SetWallData(double dBomEl,EAlign kAlign/* = kMid*/)
{
	AssertWriteEnabled();

	//重新生成2D
	m_drawable2d.RemoveEdage();

	AcDbLine* pLn = AcDbLine::cast(m_pBaseCurve);
	if (pLn != NULL)
	{
		AcGePoint3d pt0 = pLn->startPoint();
		AcGePoint3d pt1 = pLn->endPoint();

		pt0.z = dBomEl;pt1.z = dBomEl;
		pLn->setStartPoint(pt0);
		pLn->setEndPoint(pt1);
	}

	AcDbArc* pArc = AcDbArc::cast(m_pBaseCurve);
	if (pArc != NULL)
	{
		AcGePoint3d ptCen = pArc->center();
		ptCen.z = dBomEl;
		pArc->setCenter(ptCen);
	}

	AcDbCircle *pCir = AcDbCircle::cast(m_pBaseCurve);
	if (pCir != NULL)
	{
		AcGePoint3d ptCen = pCir->center();
		ptCen.z = dBomEl;
		pCir->setCenter(ptCen);
	}

	AcDbPolyline* pPl = AcDbPolyline::cast(m_pBaseCurve);
	if (pPl != NULL)
	{
		pPl->setElevation(dBomEl);
	}

	m_mapSpecXData.SetAt(PIPE_EL,dBomEl);

	return true;
}

bool AecDbXWall::SetWallData(double dThick,double dH,double dBomEl,EAlign kAlign)
{
	if (dThick < 1.e-3 || dH < 1.e-3 )
		return false;

	AssertWriteEnabled();

	//重新生成2D
	m_drawable2d.RemoveEdage();

	/*
	0/4   1
	+-----+
	|	  |
	|	  |
	|	  |
	+-----+
	3     2
	*/
	SetSection(dThick,dH,dBomEl,kAlign);

	return true;
}

int AecDbXWall::ImpMakeWwSectionPoints(const WallData& data,AcGePoint3d* ptGe,int nPts) const
{
	/*
        0/6 
	    +--+ 1
	    |  |
	    |  |
  4 +---+5 | 
    |      | 
	|      |
	+------+ 2   
    3

	0/8 
	   +--+ 1
	   |  |
	   |  |
	6__|7 |2__.
	|        | 3
	|        |
	+--------+ 4     
	5

	0/6 
	+--+ 1
	|  |
	|  |
	|  |2__.
	|      | 3
	|      |
	+------+ 4     
	5

	*/

	if (ptGe == NULL)
		return 0;

	int nPoints = 0;
	switch(data.nW2Pos)
	{
	case 0://左侧外延
		{
			ptGe[0].set(0,0,0);
			ptGe[0].y += data.dBomEl;//底中心
	
			ptGe[3] = ptGe[0];
			ptGe[3].x -= 0.5 * data.dThick2;

			ptGe[2] = ptGe[3];
			ptGe[2].x += data.dThick2;
			
			ptGe[1] = ptGe[2];
			ptGe[1].y += data.dH;

			ptGe[0] = ptGe[1];
			ptGe[0].x -= data.dThick;

			ptGe[6] = ptGe[0];

			ptGe[5] = ptGe[0];
			ptGe[5].y -= (data.dH - data.dH2);

			ptGe[4] = ptGe[3];
			ptGe[4].y += data.dH2;
			nPoints = 7;

			break;
		}
	case 1://居中对称
		{
			ptGe[0].set(0,0,0);
			ptGe[0].y += data.dBomEl;//底中心

			ptGe[5] = ptGe[0];
			ptGe[5].x -= 0.5 * data.dThick2;

			ptGe[4] = ptGe[5];
			ptGe[4].x += data.dThick2;

			ptGe[3] = ptGe[4];
			ptGe[3].y += data.dH2;

			ptGe[6] = ptGe[5];
			ptGe[6].y += data.dH2;

			ptGe[7] = ptGe[6];
			ptGe[7].x += 0.5 * ( data.dThick2 - data.dThick );

			ptGe[2] = ptGe[7];
			ptGe[2].x += data.dThick;

			ptGe[1] = ptGe[2];
			ptGe[1].y += (data.dH - data.dH2);

			ptGe[0] = ptGe[1];
			ptGe[0].x -= data.dThick;

			ptGe[8] = ptGe[0];
			nPoints = 9;

			break;
		}
	case 2://右侧外延
		{
			ptGe[0].set(0,0,0);
			ptGe[0].y += data.dBomEl;//底中心

			ptGe[5] = ptGe[0];
			ptGe[5].x -= 0.5 * data.dThick2;

			ptGe[4] = ptGe[5];
			ptGe[4].x += data.dThick2;

			ptGe[3] = ptGe[4];
			ptGe[3].y += data.dH2;

			ptGe[2] = ptGe[3];
			ptGe[2].x -= (data.dThick2 - data.dThick);

			ptGe[1] = ptGe[2];
			ptGe[1].y += (data.dH - data.dH2);

			ptGe[0] = ptGe[1];
			ptGe[0].x -= data.dThick;

			ptGe[6] = ptGe[0];
			nPoints = 7;

			break;
		}
	default:
		break;
	}

	switch(data.kAlign)
	{
	case kMid://居中
		{
			break;
		}
	case kLeft://左侧
		{
			for (int i = 0;i < 5;i++)
			{
				ptGe[i].x -= 0.5 * data.dThick2;
			}
			break;
		}
	case kRight:
		{
			for (int i = 0;i < 5;i++)
			{
				ptGe[i].x += 0.5 * data.dThick2;
			}
			break;
		}
	default:
		break;
	}
	return nPoints;
}

bool AecDbXWall::SetWallData(double dThick,double dH,double dThick2,double dH2,int nW2Pos,double dBomEl,EAlign kAlign/* = kMid*/)
{
	AssertWriteEnabled();

	if ( ( dThick2 - dThick ) < 1.e-6 || dH2 < 1.e-6 || dThick2 < 1.e-6)
	{
		return SetWallData(dThick,dH,dBomEl,kAlign);
	}

	//重新生成2D
	m_drawable2d.RemoveEdage();

	if (dThick < 1.e-3 || dH < 1.e-3 )
		return false;

	int nPoints = 0;
	AcGePoint3d ptGe[10];

	WallData wData;
	wData.dBomEl = dBomEl;
	wData.dH = dH;
	wData.dH2 = dH2;
	wData.dThick = dThick;
	wData.dThick2 = dThick2;
	wData.kAlign = kAlign;
	wData.nSecShape = eWw;
	wData.nW2Pos = nW2Pos;

	nPoints = ImpMakeWwSectionPoints(wData,ptGe,10);

	//底标高基准点
	AcGePoint3d ptCen;
	ptCen.set(0,0,0);

	AcDbRegion* pReg = CreateRetangeRegion(ptGe,nPoints);
	SetSection(pReg,ptCen);

	//TEST
	//AddToModelSpace(pReg);
	delete pReg;

	//记录底部标高数值
	m_mapSpecXData.SetAt(KEY_SIZE1,dThick);
	m_mapSpecXData.SetAt(KEY_SIZE2,dH);
	m_mapSpecXData.SetAt(KEY_SIZE3,dThick2);
	m_mapSpecXData.SetAt(KEY_SIZE4,dH2);
	m_mapSpecXData.SetAt(PIPE_EL,dBomEl);
	m_mapSpecXData.SetAt(KEY_SECSHAPE,eWw);//不等宽墙体
	m_mapSpecXData.SetAt(KEY_ALIGN,kAlign);
	m_mapSpecXData.SetAt(KEY_W2POS,nW2Pos);

	return true;
}

bool AecDbXWall::GetWallData(WallData& data) const
{
	assertReadEnabled();

	memset(&data,0,sizeof(WallData));
	m_mapSpecXData.GetAt(KEY_SIZE1,data.dThick);
	m_mapSpecXData.GetAt(KEY_SIZE2,data.dH);
	m_mapSpecXData.GetAt(KEY_SIZE3,data.dThick2);
	m_mapSpecXData.GetAt(KEY_SIZE4,data.dH2);
	m_mapSpecXData.GetAt(PIPE_EL,data.dBomEl);

	int nAlign = 0;
	m_mapSpecXData.GetAt(KEY_ALIGN,nAlign);
	data.kAlign = (EAlign)nAlign;

	m_mapSpecXData.GetAt(KEY_SECSHAPE,data.nSecShape);//标准
	m_mapSpecXData.GetAt(KEY_W2POS,data.nW2Pos);
	m_mapSpecXData.GetAt(KEY_NO,data.szNO);

	CString sTemp;
	m_mapSpecXData.GetAt(KEY_MATERIAL,sTemp);
	_tcscpy(data.szMat,(LPCTSTR)sTemp);

	return true;
}

Acad::ErrorStatus AecDbXWall::AdjustHoleAndPipe(double dThickAdd)
{
	AcDbObjectId id;
	AcDbEntity* pEnt = NULL;
	Acad::ErrorStatus es;

	if (objectId().isValid())
	{
		AcDbCurve* pLeft = GetLeftCurve();
		AcDbCurve* pRight = GetRightCurve();

		AcGeVector3d vtAdd;
		AcGePoint3d ptOrgOld,ptOrgNew,pt1,pt2;

		if (pLeft != NULL && pRight != NULL)
		{
			for (int i = 0;i < m_arAssocPartEntIds.length();i++)
			{
				id = m_arAssocPartEntIds.at(i);
				if ( Acad::eOk == (es = acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite)))
				{
					AecDbX3dPartEntity* pPart = AecDbX3dPartEntity::cast(pEnt);
					if (pPart != NULL)
					{
						ptOrgOld = pPart->GetOrgPoint(true);

						pLeft->getClosestPointTo(ptOrgOld,pt1);
						pRight->getClosestPointTo(ptOrgOld,pt2);

						ptOrgNew = MidPoint(pt1,pt2);
						ptOrgNew.z = ptOrgOld.z;

						vtAdd = ptOrgNew - ptOrgOld;

						pPart->HoleAndPipeExtend(dThickAdd,vtAdd);
					}
					pEnt->close();
				}
			}

			delete pLeft;
			delete pRight;
		}
	}
	return Acad::eOk;
}

void AecDbXWall::AddHoleDimPoints(AcDbGripDataPtrArray& grips,const AcGeVector3d& curViewDir) const
{
	AcDbObjectId id;
	AcDbEntity* pEnt = NULL;
	Acad::ErrorStatus es;

	if (objectId().isValid())
	{
		AcGeVector3d vtAdd;
		AcGePoint3d ptOrgOld,ptOrgNew,pt1,pt2;
	
		for (int i = 0;i < m_arAssocPartEntIds.length();i++)
		{
			id = m_arAssocPartEntIds.at(i);
			if ( Acad::eOk == (es = acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead)))
			{
				AecDbX3dPartEntity* pPart = AecDbX3dPartEntity::cast(pEnt);
				if (pPart != NULL)
				{
					CString sName = pPart->GetName();
					if (sName.CompareNoCase(_T("开洞")) == 0)
					{
						pPart->SubAddDimPoints(grips,curViewDir);
					}
				}
				pEnt->close();
			}
		}
	}
}

void GetMidPoint(AcDbCurve* pNaCurve,AcGePoint3d& ptMid) 
{
	AcDbLine* pLn = AcDbLine::cast(pNaCurve);
	if (pLn != NULL)
	{
		ptMid = MidPoint(pLn->startPoint(),pLn->endPoint());
	}

	AcDbArc* pArc = AcDbArc::cast(pNaCurve);
	if (pArc != NULL)
	{
		ptMid = GetArcMidPoint(pArc);
	}
}

bool IsOnCurve(AcDbCurve* pCurve,AecEqui::AecCurveElement& el)
{
	AcDbLine* pLn = AcDbLine::cast(pCurve);
	if (pLn != NULL)
	{
		AcGePoint3d ptOn;
		pLn->getClosestPointTo(el.ptGe[0],ptOn,Adesk::kTrue);

		if (ptOn.distanceTo(el.ptGe[0]) < 1.e-1)
		{
			pLn->getClosestPointTo(el.ptGe[2],ptOn,Adesk::kTrue);

			if (ptOn.distanceTo(el.ptGe[2]) < 1.e-1)
			{
				return true;
			}
		}
	}

	AcDbArc* pArc = AcDbArc::cast(pCurve);
	if (pArc != NULL)
	{
		AcGePoint3d ptCen = pArc->center();

		double dR = pArc->radius();

		double dr1 = el.ptGe[0].distanceTo(ptCen);
		double dr2 = el.ptGe[2].distanceTo(ptCen);

		if ( fabs(dr1 - dR) < 1.e-1 && fabs(dr2 - dR) < 1.e-1)
		{
			return true;
		}
	}
	return false;
}

//只针对直线的情况
bool AecDbXWall::GetDrawable2dLeft(AecComplexCurve& cmplL) const
{
	assertReadEnabled();

	AecEqui::AecCurveElement el = GetLeftElement();

	AcDbCurve* pCurve = NULL;
	AecComplexCurve::MakeCurve(el,pCurve);

	if (pCurve == NULL)
		return false;

	AecComplexCurve cmpl;
	m_drawable2d.GetEdage(cmpl);

	AcGeVector3d vt1,vt2;
	for (int j = 0;j < cmpl.length();j++)
	{
		AecEqui::AecCurveElement& eT = cmpl.atByRef(j);

		//判断共线
		if (IsOnCurve(pCurve,eT) && !eT.bHided)
		{
			cmplL.append(eT);
		}
	}
	delete pCurve;
	return !cmplL.isEmpty();
}

//只针对直线的情况
bool AecDbXWall::GetDrawable2dRight(AecComplexCurve& cmplR) const
{
	assertReadEnabled();

	AecEqui::AecCurveElement el = GetRightElement();

	AcDbCurve* pCurve = NULL;
	AecComplexCurve::MakeCurve(el,pCurve);

	if (pCurve == NULL)
		return false;

	AecComplexCurve cmpl;
	m_drawable2d.GetEdage(cmpl);

	AcGeVector3d vt1,vt2;
	for (int j = 0;j < cmpl.length();j++)
	{
		AecEqui::AecCurveElement& eT = cmpl.atByRef(j);

		//判断共线
		//判断共线
		if (IsOnCurve(pCurve,eT) && !eT.bHided)
		{
			cmplR.append(eT);
		}
	}
	delete pCurve;
	return !cmplR.isEmpty();
}

bool AecDbXWall::GetTailLineElement(AcGePoint3d* pptLSE,AecComplexCurve& cmplL) const
{
	int nFat = -1;
	AcGePoint3dArray arPts;

	for (int j = 0;j < cmplL.length();j++)
	{
		AecEqui::AecCurveElement& eT = cmplL.atByRef(j);
	
		if (!arPts.find(eT.ptGe[0],nFat))
			arPts.append(eT.ptGe[0]);

		if (!arPts.find(eT.ptGe[2],nFat))
			arPts.append(eT.ptGe[2]);
	}

	if (!arPts.isEmpty())
	{
		if (arPts.length() > 1)
		{
			AcDbCurve* pCurve = GetNativeCurve();

			AecCoverBooleanOper::SortPoints(arPts,pCurve,false);

			pptLSE[0] = arPts.first();
			pptLSE[1] = arPts.last();

			return true;
		}
	}
	return false;
}

BOOL AecDbXWall::IsVViewWall() const
{
	assertReadEnabled();

	BOOL bIsVView = FALSE;
	m_mapSpecXData.GetAt(KEY_VVIEW,bIsVView);
	return bIsVView;
}

AcDbCurve* AecDbXWall::GetAsNativeCurveOfVView() const
{
	assertReadEnabled();

	AcDbCurve* pLeft = GetLeftCurve();
	AcDbCurve* pRight = GetRightCurve();

	if (pLeft != NULL && pRight != NULL)
	{
		//默认为同向
		AcGePoint3d ptL[2];
		pLeft->getStartPoint(ptL[0]);
		pLeft->getEndPoint(ptL[1]);

		AcGePoint3d ptR[2];
		pRight->getStartPoint(ptR[0]);
		pRight->getEndPoint(ptR[1]);

		AcGePoint3d ptS,ptE;
		ptS = MidPoint(ptL[0],ptR[0]);
		ptE = MidPoint(ptL[1],ptR[1]);

		AcDbLine* pLn = new AcDbLine;
		pLn->setStartPoint(ptS);
		pLn->setEndPoint(ptE);
		return pLn;
	}
	return NULL;
}

int AecDbXWall::GetNearPosition(const AcGePoint3d& ptOn) const
{
	AcDbCurve* pCurve = GetAsNativeCurveOfVView();
	if (pCurve != NULL)
	{
		AcGePoint3d ptS,ptE;
		pCurve->getStartPoint(ptS);
		pCurve->getEndPoint(ptE);
		delete pCurve;

		ptS.z = ptOn.z;
		ptE.z = ptOn.z;

		if (ptOn.distanceTo(ptS) < ptOn.distanceTo(ptE))
		{
			return 0;
		}
		return 1;
	}
	return -1;
}

//创建开始末尾位置连接solid
AcDb3dSolid* AecDbXWall::CreateJoin3dSolid(AcDb3dSolid* pSolidAll,int nPos) const
{
	//里面拉墙体暂时不参与融合
	BOOL bIsVView = FALSE;
	m_mapSpecXData.GetAt(KEY_VVIEW,bIsVView);
	if (bIsVView)//立面墙体
	{
		return pSolidAll;
	}

	//先特殊处理acdbline
	int nSecShape = 0;
	m_mapSpecXData.GetAt(KEY_SECSHAPE, nSecShape);
	bool bOnXY = (nSecShape == eUserDef) ? false : true;

	AcDbCurve* pBaseCr = GetBaseCurve(bOnXY);
	if (pBaseCr != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(pBaseCr);
		if (pLn != NULL)
		{
			Acad::ErrorStatus es;
			
			AcGePoint3d ptSta = pLn->startPoint();
			AcGePoint3d ptEnd = pLn->endPoint();

			AcGeVector3d vtL = ptEnd - ptSta;
			WallData data;
			GetWallData(data);

			//获取左右延申的长度
			//确定端头
			bool bStaAdd = false;
			bool bEndAdd = false;

			vtL.normalize();
			AcGePoint3d pt2;

			double dL = data.dThick * 3.0;//ptSta.distanceTo(ptEnd) / 4.0;
			if (dL > 1.e-3)//STA
			{
				AcDbLine lnS;
				lnS.setEndPoint(ptSta);
				pt2 = ptSta - dL * vtL;
				lnS.setStartPoint( pt2 );

				AcDbRegion* pRegionWall = GetSection();
				AcGePoint3d ptOnRegion;
				m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);
				transfromRegion(pRegionWall,ptOnRegion,vtL,pt2);

				AcDb3dSolid* pSolidS = new AcDb3dSolid;
				es = pSolidS->extrudeAlongPath(pRegionWall,&lnS);
				if (es != Acad::eOk)
				{
					delete pSolidS;
					acutPrintf(_T("\nextrudeAlongPath error %d"),es);
				}
				else
				{
					es = pSolidAll->booleanOper(AcDb::kBoolUnite,pSolidS);
					if (es == Acad::eOk)
					{
						bStaAdd = true;
					}
					else
					{
						acutPrintf(_T("\nkBoolUnite error %d"),es);
					}
				}
				delete pRegionWall;
			}

			if (dL > 1.e-3) //END
			{
				AcDbLine lnE;
				lnE.setStartPoint(ptEnd);
				pt2 = ptEnd + dL * vtL;
				lnE.setEndPoint( pt2 );

				AcDbRegion* pRegionWall = GetSection();
				AcGePoint3d ptOnRegion;
				m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);
				transfromRegion(pRegionWall,ptOnRegion,vtL,ptEnd);

				AcDb3dSolid* pSolidE = new AcDb3dSolid;
				es = pSolidE->extrudeAlongPath(pRegionWall,&lnE);
				if (es != Acad::eOk)
				{
					delete pSolidE;
					acutPrintf(_T("\nextrudeAlongPath error %d"),es);
				}
				else
				{
					es = pSolidAll->booleanOper(AcDb::kBoolUnite,pSolidE);
					if (es == Acad::eOk)
					{
						bEndAdd = true;
					}
					else
					{
						acutPrintf(_T("\nkBoolUnite error %d"),es);
					}
				}
				delete pRegionWall;
			}

			//取外围的闭合曲线,裁剪
			if (bStaAdd || bEndAdd)
			{
				AcDbLine lnH;
				ptSta.z = data.dBomEl;
				lnH.setStartPoint(ptSta);

				ptEnd = ptSta;
				ptEnd.z += data.dH;

				lnH.setEndPoint(ptEnd);

				AcDbPolyline* pPl = GetWall2dBoundary();
				if (pPl != NULL)
				{
					pPl->setElevation(data.dBomEl);
					
					AcDbVoidPtrArray arCurPtrs,arRegPtrs;
					arCurPtrs.append(pPl);

					AcDbRegion* pReg = NULL;
					if ( Acad::eOk == AcDbRegion::createFromCurves(arCurPtrs,arRegPtrs) )
					{
						if (!arRegPtrs.isEmpty())
						{
							pReg = (AcDbRegion*)arRegPtrs.first();
						}
					}
					delete pPl;

					AcDb3dSolid* pSolidB = new AcDb3dSolid;
					es = pSolidB->extrudeAlongPath(pReg,&lnH);
					if (es != Acad::eOk)
					{
						delete pSolidB;
					}
					else
					{
						es = pSolidAll->booleanOper(AcDb::kBoolIntersect,pSolidB);
					}
					delete pReg;
				}
			}
		}
		else
		{
			//...圆弧
		}
		delete pBaseCr;
	}
	return pSolidAll;
}

AcDb3dSolid* AecDbXWall::SliceJoinPart3d(AcDb3dSolid* pSolidAll) const
{
	//首先和具有 KEY_FORSLICE 标记的Part并
	Acad::ErrorStatus es = Acad::eOk;
	int nBoolOper = 0,bSlice = 0,nPos = 0;
	AcDb3dSolid* pSolidPart = NULL;
	AecDbX3dPart* pPart = NULL;
	bool bHasSlice = false;
	BOOL bEndAdd = FALSE;
	BOOL bStaAdd = FALSE;

	for (int i = 0;i < m_arX3DPartPtrs.length();i++)
	{
		pPart = (AecDbX3dPart*)m_arX3DPartPtrs.at(i);

		bSlice = 0;
		if ( pPart->GetSpecialtyData()->GetAt(KEY_FORSLICE,bSlice) )
		{
			if (bSlice == 0)
			{
				continue;
			}
		}

		pPart->GetSpecialtyData()->GetAt(KEY_POS,nPos);
		if (nPos == 0)
			bStaAdd = TRUE;
		if (nPos == 1)
			bEndAdd = TRUE;

		bHasSlice = true;
		nBoolOper = pPart->GetBoolOperFor();
		if (nBoolOper == AcDb::kBoolUnite)
		{
			pSolidPart = pPart->CreateDraw3dSolid();
			if (pSolidPart == NULL)
			{
				pPart->Create();
				pSolidPart = pPart->CreateDraw3dSolid();
			}

			if (pSolidPart != NULL)
			{
				if ( Acad::eOk == (es = pSolidAll->booleanOper(AcDb::kBoolUnite,pSolidPart) ) )
				{
				}
				else
				{
					acutPrintf(_T("\nUnite Oper error:%d"),es);
				}
			}
		}
	}

	AcDbCurve *pBaseCr = GetNativeCurve();
	AcDbArc *pArc = AcDbArc::cast(pBaseCr);
	if (pArc != NULL)
	{
		AcGePoint3d ptSta, ptEnd;
		pArc->getStartPoint(ptSta);
		pArc->getEndPoint(ptEnd);

		WallData data;
		GetWallData(data);

		AcDbLine lnH;
		ptSta.z = data.dBomEl;
		lnH.setStartPoint(ptSta);

		ptEnd = ptSta;
		ptEnd.z += data.dH;

		lnH.setEndPoint(ptEnd);

		AcDbPolyline *pPl = GetWall2dBoundary();
		if (pPl != NULL)
		{
			pPl->setElevation(data.dBomEl);

			AcDbVoidPtrArray arCurPtrs, arRegPtrs;
			arCurPtrs.append(pPl);

			AcDbRegion *pReg = NULL;
			if (Acad::eOk == AcDbRegion::createFromCurves(arCurPtrs, arRegPtrs))
			{
				if (!arRegPtrs.isEmpty())
				{
					pReg = (AcDbRegion *)arRegPtrs.first();
				}
			}
			//pPl->setColorIndex(2);
			//AddToModelSpace(pPl);
			delete pPl;

			AcDb3dSolid *pSolidB = new AcDb3dSolid;
			es = pSolidB->extrudeAlongPath(pReg, &lnH);
			if (es != Acad::eOk)
			{
				delete pSolidB;
			}
			else
			{
				//delete pSolidB;
				//pSolidB->setColorIndex(1);
				//AddToModelSpace(pSolidB);
				es = pSolidAll->booleanOper(AcDb::kBoolIntersect, pSolidB);
			}
			delete pReg;
		}
	}

	if (!bHasSlice)
	{
		return pSolidAll;
	}

	//取出左面线
	AecComplexCurve cmplL;
	GetDrawable2dLeft(cmplL);

	//获取两头的点
	AcGePoint3d ptLSE[2];
	bool bL = GetTailLineElement(ptLSE,cmplL);

	//取出右面线
	AecComplexCurve cmplR;
	GetDrawable2dRight(cmplR);

	AcGePoint3d ptRSE[2];
	bool bR = GetTailLineElement(ptRSE,cmplR);

	AcGePoint3d ptMs = MidPoint(ptLSE[0],ptRSE[0]);
	AcGePoint3d ptMe = MidPoint(ptLSE[1],ptRSE[1]);

	AcGePoint3d ptSta,ptEnd;
	pBaseCr->getStartPoint(ptSta);
	pBaseCr->getEndPoint(ptEnd);

	//获取左右延申的长度
	//确定端头
	double dL1 = ptMs.distanceTo(ptSta);
	double dL2 = ptMe.distanceTo(ptSta);
	AcGePoint3d ptT;
	if (dL1 > dL2)//互换
	{
		ptT = ptMs;
		ptMs = ptMe;
		ptMe = ptT;

		AcGePoint3d ptGT[2];
		memcpy(ptGT,ptLSE,sizeof(AcGePoint3d) * 2);
		memcpy(ptLSE,ptRSE,sizeof(AcGePoint3d) * 2);
		memcpy(ptRSE,ptGT,sizeof(AcGePoint3d) * 2);
	}
	ptMs = MidPoint(ptLSE[0],ptRSE[0]);
	ptMe = MidPoint(ptLSE[1],ptRSE[1]);

	AcGeVector3d vtSHalf = ptRSE[0] - ptLSE[0];
	AcGeVector3d vtEHalf = ptRSE[1] - ptLSE[1];

	//TEST
	/*AcDbLine *pLn1 = new AcDbLine(ptRSE[0], ptLSE[0]);
	pLn1->setColorIndex(1);
	AddToModelSpace(pLn1);

	AcDbLine *pLn2 = new AcDbLine(ptRSE[1], ptLSE[1]);
	pLn2->setColorIndex(1);
	AddToModelSpace(pLn2);*/

	double dA1 = 0.0;
	double dA2 = 0.0;
	AcDb3dSolid* pNegSolid = NULL;
	if (bStaAdd)
	{
		//TEST
		AcGePlane planS;
		vtSHalf.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
		planS.set(ptMs,vtSHalf);

		pSolidAll->getSlice(planS,Adesk::kTrue,pNegSolid);
		if (pNegSolid != NULL)
		{
			pSolidAll->getArea(dA1);
			pNegSolid->getArea(dA2);

			if (dA1 < dA2)
			{
				delete pSolidAll;
				pSolidAll = pNegSolid;
			}
			else
			{
				//pNegSolid->setColorIndex(2);
				//AddToModelSpace(pNegSolid);
				delete pNegSolid;
			}
		}
	}

	if (bEndAdd)
	{
		AcGePlane planE;
		vtEHalf.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
		planE.set(ptMe,vtEHalf);

		pNegSolid = NULL;
		pSolidAll->getSlice(planE,Adesk::kTrue,pNegSolid);
		if (pNegSolid != NULL)
		{
			pSolidAll->getArea(dA1);
			pNegSolid->getArea(dA2);

			if (dA1 < dA2)
			{
				delete pSolidAll;
				pSolidAll = pNegSolid;
			}
		}
	}
	return pSolidAll;
}

void AecDbXWall::ExtClosesttoDraw2d(AcDbCurve* pCurve) const
{
	AecComplexCurve draw2d;
	GetDraw2dables(draw2d);

	AcGePoint3d ptOn;
	AcGePoint3dArray arPts;
	for (int i = 0; i < draw2d.length(); i++)
	{
		AecEqui::AecCurveElement &el = draw2d.atByRef(i);

		pCurve->getClosestPointTo(el.ptGe[0], ptOn,Adesk::kTrue);
		if (arPts.find(ptOn) == -1) arPts.append(ptOn);

		pCurve->getClosestPointTo(el.ptGe[2], ptOn, Adesk::kTrue);
		if (arPts.find(ptOn) == -1) arPts.append(ptOn);
	}

	if (arPts.isEmpty()) return;

	AcDbRay ln;
	AcDbCircle cir;
	AcDbCurve *pCrvTmp = NULL;

	AcDbLine *pLn = AcDbLine::cast(pCurve);
	if (pLn != NULL)
	{
		AcGeVector3d vtLn = pLn->endPoint() - pLn->startPoint();
		ln.setBasePoint(pLn->startPoint());
		ln.setUnitDir(vtLn);
		pCrvTmp = &ln;
	}

	AcDbArc *pArc = AcDbArc::cast(pCurve);
	if (pArc != NULL)
	{
		cir.setCenter(pArc->center());
		cir.setRadius(pArc->radius());
		cir.setNormal(pArc->normal());
		pCrvTmp = &cir;
	}

	if (!pCrvTmp) return;

	AecCoverBooleanOper::SortPoints(arPts, pCrvTmp, false);

	if (pLn != NULL)
	{
		pLn->setStartPoint(arPts.first());
		pLn->setEndPoint(arPts.last());
	}

	if (pArc != NULL && arPts.length() > 2)
	{
		AcDbArc* pArcT = FormatArc(arPts.first(), arPts.at(1), arPts.last());
		double dSta = pArcT->startAngle();
		double dEnd = pArcT->endAngle();
		pArc->setStartAngle(dSta);
		pArc->setEndAngle(dEnd);
		delete pArcT;
	}
}

AcDb3dSolid* AecDbXWall::GetDraw3dSolid(bool bAttachBimInf,int nColor,bool bSubtractHole/* = true*/) const
{
	assertReadEnabled();

	int nSecShape = 0;
	m_mapSpecXData.GetAt(KEY_SECSHAPE,nSecShape);

	bool bOnXY = (nSecShape == eUserDef) ? false : true;

	AcDbCurve* pCurve = GetBaseCurve(bOnXY);
	if (pCurve == NULL)
		return NULL;

	//根据工艺视图,再两端延长
	ExtClosesttoDraw2d(pCurve);
	
	int nShow3d = 0;
	m_mapSpecXData.GetAt(KEY_3DSHOW,nShow3d);

	AcDb3dSolid* pSolid = NULL;
	AcDbRegion* pRegionWall = GetSection();
	if (pRegionWall != NULL)
	{
		//1.创建整体Solid
		AcGePoint3d ptOnRegion;
		m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

		double dSta = 0.0;
		pCurve->getStartParam(dSta);

		AcGeVector3d vtDir;
		pCurve->getFirstDeriv(dSta,vtDir);

		AcGePoint3d ptOnPlan;
		pCurve->getStartPoint(ptOnPlan);

		AcGePoint3d ptEnd;
		pCurve->getEndPoint(ptEnd);
		
		AcDbExtents ext;
		pRegionWall->getGeomExtents(ext);
		AcGePoint3d ptOrg = ext.minPoint();

		//墙体被变换立面了特殊情况处理
		if (vtDir.isParallelTo(AcGeVector3d::kZAxis))
		{
			AcGeVector3d vtM = ptOnPlan - ptOrg;
			AcGeMatrix3d xM;
			xM.setToTranslation(vtM);
			pRegionWall->transformBy(xM);
		}
		else
		{
			transfromRegion(pRegionWall,ptOnRegion,vtDir,ptOnPlan);
		}

		Acad::ErrorStatus es = Acad::eOk;

		// 处理 CAD 3D 实体体量不能大于 120000问题 
		// 拉伸 扫掠 实体，路径长不能大于 120000 ，圆，弧 除外
		AcDbVoidPtrArray arCuvs;
		if (AcDbCircle::cast(pCurve)
			|| AcDbArc::cast(pCurve)
			|| !CoreTools::spliteCurve(pCurve, 100000., arCuvs))
		{
			pSolid = new AcDb3dSolid;
			es = pSolid->extrudeAlongPath(pRegionWall, pCurve);
			DELETE_PTR(pRegionWall);
			if (es != Acad::eOk)
			{
				acutPrintf(_T("\nextrude error:%d"), es);
				DELETE_PTR(pSolid);
				DELETE_PTR(pCurve);
				return NULL;
			}
		}
		else
		{
		#ifndef ZWCAD
			DELETE_PTR(pRegionWall);
			AcGePoint3d ptStart(AcGePoint3d::kOrigin);
			AcDbVoidPtrArray arSolids;
			for (int i = 0; i < arCuvs.length(); ++i)
			{
				AcDbCurve *p((AcDbCurve*)arCuvs[i]);
				if (!p) continue;

				p->getStartPoint(ptStart);
				AcDbRegion *pReg = GetSection();
				transfromRegion(pReg, ptOnRegion, vtDir, ptStart);

				AcDb3dSolid *pSo = new AcDb3dSolid();
				es = pSo->extrudeAlongPath(pReg, p);
				DELETE_PTR(pReg);
				if (es != Acad::eOk)
				{
					// 一个失败，全部离开
					acutPrintf(_T("\nextrude error:%d"), es);
					DELETE_PTR(pSo);
					DELETE_PTR(pCurve);
					deleteArrayVoidPtrs< AcDbEntity>(arCuvs);
					return NULL;
				}
				arSolids.append(pSo);
			}
			deleteArrayVoidPtrs< AcDbEntity>(arCuvs);

			if (arSolids.length() < 2)
			{
				deleteArrayVoidPtrs< AcDbEntity>(arSolids);
				DELETE_PTR(pCurve);
				return NULL;
			}
			pSolid = (AcDb3dSolid*)((AcDb3dSolid*)arSolids[0])->clone();
			for (int i = 1; i < arSolids.length(); ++i)
			{
				es = pSolid->booleanOper(AcDb::kBoolUnite, (AcDb3dSolid*)arSolids[i]);
			}
			deleteArrayVoidPtrs< AcDbEntity>(arSolids);
		#else
			deleteArrayVoidPtrs< AcDbEntity>(arCuvs);
			pSolid = new AcDb3dSolid;
			AcDbSweepOptions sweepOp;
			es = pSolid->createSweptSolid((AcDbEntity *)pRegionWall, (AcDbEntity *)pCurve, sweepOp);
			DELETE_PTR(pRegionWall);
			if (es != Acad::eOk)
			{
				acutPrintf(_T("\nextrude error:%d"), es);
				DELETE_PTR(pSolid);
				DELETE_PTR(pCurve);
				return NULL;
			}
		#endif
		}

		//先补后切方法
		if (nShow3d == 1)
		{
			pSolid = CreateJoin3dSolid(pSolid,-1);	
		}

		//和PArt 先布尔处理一下
 		GetBooleanPart3D(pSolid);

		//然后根据二维线切割增加的融合PART
		if (nShow3d == 1)
		{
			pSolid = SliceJoinPart3d(pSolid);
		}

		//开洞
		//2.在开除关联的part的对象
		if (bSubtractHole)
		{
			BoolSubtractAssoc(pSolid);
		}
	}

	//3.按照墙体底部坡度切割
	if (pSolid != NULL && pCurve != NULL && nShow3d == 0)
	{
		double dGradient = GetGradient();
		if (fabs(dGradient) > 1.e-6)//必须大于fab(1.e-6)的坡度
		{
			double dSta = 0.0,dEnd = 0.0;
			pCurve->getStartParam(dSta);
			pCurve->getEndParam(dEnd);

			AcGePoint3d ptSta,ptEnd;
			pCurve->getStartPoint(ptSta);
			pCurve->getEndPoint(ptEnd);
			double dLxy = ptEnd.distanceTo(ptSta);

			AcGePoint3d ptMid;
			pCurve->getPointAtParam((dSta + dEnd) / 2.0,ptMid);

			double dElDt = 0.5 * dLxy * dGradient * 0.01;
			ptEnd.z = ptMid.z + dElDt;//终点标高

			AcGeVector3d vtL = ptEnd - ptSta;
			AcGeVector3d vtZ = AcGeVector3d::kZAxis;

			AcGeVector3d vtAx = vtL.crossProduct(vtZ);
			AcGeVector3d vtNorm = vtAx.crossProduct(vtL);

			//必须向上
			if (vtNorm.dotProduct(vtZ) < -1.e-10)
				vtNorm.negate();

			AcGePlane plan(ptMid,vtNorm);
			AcDb3dSolid* pNegHalfSolid = NULL;
			pSolid->getSlice(plan,Adesk::kFalse,pNegHalfSolid);
		}
	}

	if (pCurve != NULL)
	{
		delete pCurve;
	}

	if (bAttachBimInf != NULL)
	{
		m_mapSpecXData.Write(pSolid,_T("BIMDATA"));
	}
	return pSolid;
}

Acad::ErrorStatus AecDbXWall::BoolSubtractAssoc(AcDb3dSolid* pSolid) const
{
	assertReadEnabled();

	AcDb3dSolid* pSolidPart = NULL;
	AcDbObjectId id;
	AcDbEntity* pEnt = NULL;

	Acad::ErrorStatus es;
	for (int i = 0;i < m_arAssocPartEntIds.length();i++)
	{
		id = m_arAssocPartEntIds.at(i);
		if ( Acad::eOk == (es = acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead)))
		{
			AecDbX3dPartEntity* pPartEnt = AecDbX3dPartEntity::cast(pEnt);
			if (pPartEnt != NULL)
			{
				AcDbVoidPtrArray arSolidPtrs;
				pPartEnt->GetForHouseSubtract(arSolidPtrs);

				for(int ii = 0;ii < arSolidPtrs.length();ii++)
				{
					pSolidPart = (AcDb3dSolid*)arSolidPtrs.at(ii) ;
					if (pSolidPart != NULL)
					{
						//TEST
						//AddToModelSpace((AcDbEntity*)pSolidPart->clone());

						if ( Acad::eOk == (es = pSolid->booleanOper(AcDb::kBoolSubtract,pSolidPart) ) )
						{
							//TEST
							//AddToModelSpace((AcDbEntity*)pSolidBasin->clone());
						}
						else
						{
							acutPrintf(_T("\nSubtract Oper error:%d"),es);
						}
					}
				}
			}

			AecDbXOpening* pOpen = AecDbXOpening::cast(pEnt);
			if (pOpen != NULL)
			{
				AcDbVoidPtrArray arSolidPtrs;
				pOpen->GetForHouseSubtract(arSolidPtrs);

				for(int ii = 0;ii < arSolidPtrs.length();ii++)
				{
					pSolidPart = (AcDb3dSolid*)arSolidPtrs.at(ii) ;
					if (pSolidPart != NULL)
					{
						//TEST
						//AddToModelSpace((AcDbEntity*)pSolidPart->clone());

						if ( Acad::eOk == (es = pSolid->booleanOper(AcDb::kBoolSubtract,pSolidPart) ) )
						{
							//TEST
							//AddToModelSpace((AcDbEntity*)pSolidBasin->clone());
						}
						else
						{
							acutPrintf(_T("\nSubtract Oper error:%d"),es);
						}
					}
				}
			}

			AecDbColumn* pCol = AecDbColumn::cast(pEnt);
			if (pCol != NULL)
			{
				AcDb3dSolid* pSolidDraw = pCol->GetDraw3dSolid(false);
				if (pSolidDraw != NULL)
				{
					if ( Acad::eOk == (es = pSolid->booleanOper(AcDb::kBoolSubtract,pSolidDraw) ) )
					{
						//TEST
						//AddToModelSpace((AcDbEntity*)pSolidBasin->clone());
					}
					else
					{
						acutPrintf(_T("\nSubtract Oper error:%d"),es);
					}
				}
			}
			pEnt->close();
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::dwgInFields(AcDbDwgFiler* pFiler)
{
	AssertWriteEnabled();

	//----- Read parent class information first.
	Acad::ErrorStatus es = Acad::eOk;
	es = AecDbBDPipeBase::dwgInFields (pFiler) ;
		if ( es != Acad::eOk )
			return (es) ;
	
	//----- Object version number needs to be read first
	Adesk::UInt32 version =0 ;
	if ( (es = pFiler->readUInt32 (&version)) != Acad::eOk )
		return (es) ;

	if ( version > AecDbXWall::kCurrentVersionNumber )
		return (Acad::eMakeMeProxy) ;
	
	//2D
	m_drawable2d.dwgInFields(pFiler);
	m_drawable2d.OrthoProject2XY();
	m_2dHideTail.dwgInFields(pFiler);

	return (pFiler->filerStatus ());
}

Acad::ErrorStatus AecDbXWall::dwgOutFields(AcDbDwgFiler* pFiler) const
{
	assertReadEnabled();

	//----- Save parent class information first.
	Acad::ErrorStatus es = Acad::eOk;
	es = AecDbBDPipeBase::dwgOutFields (pFiler) ;
		if ( es != Acad::eOk )
			return (es) ;
	
	//----- Object version number needs to be saved first
	if ( (es =pFiler->writeUInt32 (AecDbXWall::kCurrentVersionNumber)) != Acad::eOk )
		return (es) ;

	//2D
	m_drawable2d.dwgOutFields(pFiler);
	m_2dHideTail.dwgOutFields(pFiler);

	return (pFiler->filerStatus ());
}

Acad::ErrorStatus AecDbXWall::dxfInFields(AcDbDxfFiler* pFiler)
{
	AssertWriteEnabled();
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::dxfOutFields(AcDbDxfFiler* pFiler) const
{
	assertReadEnabled();
	return Acad::eOk;
}

void AecDbXWall::subList() const
{
	assertReadEnabled();
	AecDbBDPipeBase::subList();
	acutPrintf(_T("\n墙体:"));
	acutPrintf(_T("\n体积:%g 立方"),GetVolume() / 1.e9);
}

Acad::ErrorStatus AecDbXWall::subTransformBy(const AcGeMatrix3d& xform)
{
	AssertWriteEnabled();

	AecDbBDPipeBase::subTransformBy(xform);
	
	m_drawable2d.transformBy(xform);
	m_drawable2d.OrthoProject2XY();

	m_2dHideTail.transformBy(xform);
	m_2dHideTail.OrthoProject2XY();

	int nSecShape = 0;
	m_mapSpecXData.GetAt(KEY_SECSHAPE,nSecShape);

	//非VV墙体 放样线必须XY面
	AcDbLine *pLn = AcDbLine::cast(m_pBaseCurve);
	if (pLn != NULL)
	{
		//XY
		AcGePoint3d ptS = pLn->startPoint();
		AcGePoint3d ptE = pLn->endPoint();

		AcGeVector3d vtDir = ptE - ptS;
		AcGeLine3d ln(AcGePoint3d::kOrigin, vtDir);
		if (ln.isParallelTo(AcGePlane::kXYPlane))
		{
			if (nSecShape != eUserDef)
			{
				ptS.z = 0.0;
				ptE.z = 0.0;
			}

			pLn->setStartPoint(ptS);
			pLn->setEndPoint(ptE);
		}
	}

	AcDbArc *pArc = AcDbArc::cast(m_pBaseCurve);
	if (pArc != NULL)
	{
		AcGeVector3d vtN = pArc->normal();
		if (vtN.isParallelTo(AcGeVector3d::kZAxis))
		{
			AcGePoint3d ptC = pArc->center();
			if (nSecShape != eUserDef)
				ptC.z = 0;
			pArc->setCenter(ptC);
		}
	}

	//底部标高的变换
	double dZ = 0.0;
	m_mapSpecXData.GetAt(PIPE_EL,dZ);

	AcGePoint3d ptGe(0,0,dZ);
	ptGe.transformBy(xform);

	if ( nSecShape != eUserDef)
	{
		WallData data;
		GetWallData(data);

		// 基类的transformby函数已经变换了 PIPE_EL 的值，这里用 SetWallData 刷新就好。
		// data.dBomEl = ptGe.z;
		SetWallData(data.dThick,data.dH,data.dThick2,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::copyFrom(const AcRxObject* pSrc)
{
	AecDbBDPipeBase::copyFrom(pSrc);

	//?????需要测试 ---  通过dwgin/out复制了???
	/*AecDbXWall *pSrcWall = AecDbXWall::cast(pSrc);
	if (pSrcWall != NULL)
	{
		m_drawable2d.RemoveEdage();
		m_drawable2d.copyFrom(pSrcWall->m_drawable2d);

		m_2dHideTail.RemoveEdage();
		m_2dHideTail.copyFrom(pSrcWall->m_2dHideTail);
	}*/
	return Acad::eOk;
}

//只比较结构信息
int AecDbXWall::ComparedTo(AecDbCurveBase* pCurOther) const
{
	assertReadEnabled();

	AecDbXWall* pOther = AecDbXWall::cast(pCurOther);
	if (pOther != NULL)
	{
		WallData data1;
		GetWallData(data1);

		WallData data2;
		pOther->GetWallData(data2);

		CString sNo1 = data1.szNO;
		CString sNo2 = data2.szNO;

		//长宽高,标高
		if ( fabs(data1.dThick - data2.dThick) > 1.e-3)
			return 1;

		if ( fabs(data1.dH - data2.dH) > 1.e-3)
			return 1;

		if (data1.nSecShape == eWw && data2.nSecShape == eWw)
		{
			if (fabs(data1.dH2 - data2.dH2) > 1.e-3)
				return 1;

			if (fabs(data1.dThick2 - data2.dThick2) > 1.e-3)
				return 1;
		}

		if (fabs(data1.dBomEl - data2.dBomEl) > 1.e-3)
			return 1;

		double dLen1 = GetLength();
		double dLen2 = pOther->GetLength();

		if ( fabs(dLen1 - dLen2) > 5.0 )//5个毫米误差
			return 1;

		//位置变化
		AcGePoint3d ptS = StartPoint();
		AcGePoint3d ptE = EndPoint();

		AcGePoint3d ptS2 = pOther->StartPoint();
		AcGePoint3d ptE2 = pOther->EndPoint();

		if (ptS.distanceTo(ptS2) > 1.e-1)
			return 1;

		if (ptE.distanceTo(ptE2) > 1.e-1)
			return 1;

		//如果体积不同
		//double dVol1 = GetVolume();
		//double dVol2 = pOther->GetVolume();

		//if ( fabs(dVol1 - dVol2) > 1.0)
		//	return 1;

		//结构上相同
		return 0;
	}
	return -1;
}

void AecDbXWall::merge()
{
	AssertWriteEnabled();
	m_drawable2d.merge();
}

void AecDbXWall::boolSubtract()
{
	AssertWriteEnabled();
	m_drawable2d.boolSubtract();
}

AcDbCurve* AecDbXWall::GetWall2dBound() const
{
	assertReadEnabled();

	//绘制主双线,融合
	AcDbVoidPtrArray ar2D;
	GetStandardDraw2d(ar2D);

	AcDbVoidPtrArray arRes;
	AcDbCurve* pCurve = KTCADUtilityEx::ConvertBoundCurve(ar2D,arRes);
	return pCurve;
}

typedef float coord_t;         // coordinate type
typedef double coord2_t;  // must be big enough to hold 2*max(|coordinate|)^2
struct Point2d
{
	coord_t x, y;

	bool operator <(const Point2d &p) const {
		return x < p.x || (x == p.x && y < p.y);
	}
};
extern std::vector<Point2d> convex_hull(std::vector<Point2d> P);

AecEqui::AecCurveElement AecDbXWall::GetLeftDrawElement() const
{
	assertReadEnabled();

	AecComplexCurve draw2d;
	GetDraw2dables(draw2d);

	AcDbCurve *pLeft = GetLeftCurve();

	AcGePoint3d ptOn;
	AcGePoint3dArray arPts;
	for (int i = 0; i < draw2d.length(); i++)
	{
		AecEqui::AecCurveElement &el = draw2d.atByRef(i);

		for (int j = 0;j < 3;j++)
		{
			pLeft->getClosestPointTo(el.ptGe[j], ptOn, Adesk::kTrue);
			if (ptOn.distanceTo(el.ptGe[j]) < 1.e-2)
			{
				if (arPts.find(el.ptGe[j]) == -1) arPts.append(el.ptGe[j]);
			}
		}
	}

	AcDbRay ln;
	AcDbCircle cir;
	AcDbCurve *pCrvTmp = NULL;

	AcDbLine *pLn = AcDbLine::cast(pLeft);
	if (pLn != NULL)
	{
		AcGeVector3d vtLn = pLn->endPoint() - pLn->startPoint();
		ln.setBasePoint(pLn->startPoint());
		ln.setUnitDir(vtLn);
		pCrvTmp = &ln;
	}

	AcDbArc *pArc = AcDbArc::cast(pLeft);
	if (pArc != NULL)
	{
		cir.setCenter(pArc->center());
		cir.setRadius(pArc->radius());
		cir.setNormal(pArc->normal());
		pCrvTmp = &cir;
	}

	AecEqui::AecCurveElement el;
	memset(&el, 0, sizeof(AecEqui::AecCurveElement));

	if (arPts.isEmpty())
		return el;

	AecCoverBooleanOper::SortPoints(arPts, pCrvTmp, false);

	if (pLn != NULL && arPts.length() >= 2)
	{
		pLn->setStartPoint(arPts.first());
		pLn->setEndPoint(arPts.last());
		el.ptGe[0] = pLn->startPoint();
		el.ptGe[1] = pLn->endPoint();
		el.ptGe[2] = pLn->endPoint();
	}

	if (pArc != NULL && arPts.length() > 2)
	{
		AcDbArc *pArcT = FormatArc(arPts.first(), arPts.at(1), arPts.last());
		double dSta = pArcT->startAngle();
		double dEnd = pArcT->endAngle();
		pArc->setStartAngle(dSta);
		pArc->setEndAngle(dEnd);
		delete pArcT;

		pArc->getStartPoint(el.ptGe[0]);
		pArc->getEndPoint(el.ptGe[2]);
		el.ptGe[1] = GetArcMidPoint(pArc);
	}

	delete pLeft;
	return el;
}

AecEqui::AecCurveElement AecDbXWall::GetRightDrawElement() const
{
	assertReadEnabled();

	AecComplexCurve draw2d;
	GetDraw2dables(draw2d);

	AcDbCurve *pRight = GetRightCurve();

	AcGePoint3d ptOn;
	AcGePoint3dArray arPts;
	for (int i = 0; i < draw2d.length(); i++)
	{
		AecEqui::AecCurveElement &el = draw2d.atByRef(i);

		for (int j = 0; j < 3; j++)
		{
			pRight->getClosestPointTo(el.ptGe[j], ptOn, Adesk::kTrue);
			if (ptOn.distanceTo(el.ptGe[j]) < 1.e-2)
			{
				if (arPts.find(el.ptGe[j]) == -1) arPts.append(el.ptGe[j]);
			}
		}
	}

	AcDbRay ln;
	AcDbCircle cir;
	AcDbCurve *pCrvTmp = NULL;

	AcDbLine *pLn = AcDbLine::cast(pRight);
	if (pLn != NULL)
	{
		AcGeVector3d vtLn = pLn->endPoint() - pLn->startPoint();
		ln.setBasePoint(pLn->startPoint());
		ln.setUnitDir(vtLn);
		pCrvTmp = &ln;
	}

	AcDbArc *pArc = AcDbArc::cast(pRight);
	if (pArc != NULL)
	{
		cir.setCenter(pArc->center());
		cir.setRadius(pArc->radius());
		cir.setNormal(pArc->normal());
		pCrvTmp = &cir;
	}

	AecEqui::AecCurveElement el;
	memset(&el, 0, sizeof(AecEqui::AecCurveElement));

	if (arPts.isEmpty())
		return el;

	AecCoverBooleanOper::SortPoints(arPts, pCrvTmp, false);

	if (pLn != NULL && arPts.length() >= 2)
	{
		pLn->setStartPoint(arPts.first());
		pLn->setEndPoint(arPts.last());
		el.ptGe[0] = pLn->startPoint();
		el.ptGe[1] = pLn->endPoint();
		el.ptGe[2] = pLn->endPoint();
	}

	if (pArc != NULL && arPts.length() > 2)
	{
		AcDbArc *pArcT = FormatArc(arPts.first(), arPts.at(1), arPts.last());
		double dSta = pArcT->startAngle();
		double dEnd = pArcT->endAngle();
		pArc->setStartAngle(dSta);
		pArc->setEndAngle(dEnd);
		delete pArcT;

		pArc->getStartPoint(el.ptGe[0]);
		pArc->getEndPoint(el.ptGe[2]);
		el.ptGe[1] = GetArcMidPoint(pArc);
	}

	delete pRight;
	return el;
}

AcDbPolyline* AecDbXWall::GetWall2dBoundary() const
{
	assertReadEnabled();

	AecEqui::AecCurveElement elL = GetLeftDrawElement();
	AecEqui::AecCurveElement elR = GetRightDrawElement();

	if (elL.ptGe[0].distanceTo(elL.ptGe[1]) < 1.e-3 ||
		elR.ptGe[0].distanceTo(elR.ptGe[1]) < 1.e-3)
	{
		AcDbPolyline *pPlB = AcDbPolyline::cast(GetWall2dBound());
			return pPlB;
	}

	AcDbCurve *pCurve = GetNativeCurve();
	AcDbArc *pArc = AcDbArc::cast(pCurve);

	AcGePoint3dArray arPts;
	arPts.append(elL.ptGe[0]);
	arPts.append(elL.ptGe[2]);
	if (pArc != NULL)
	{
		arPts.append(elL.ptGe[1]);
	}

	AecCoverBooleanOper::SortPoints(arPts, pCurve, false);

	AcGePoint3d ptLSE[2];
	ptLSE[0] = arPts.first();
	ptLSE[1] = arPts.last();

	arPts.removeAll();
	arPts.append(elR.ptGe[0]);
	arPts.append(elR.ptGe[2]);
	if (pArc != NULL)
	{
		arPts.append(elR.ptGe[1]);
	}

	AecCoverBooleanOper::SortPoints(arPts, pCurve, false);
	
	AcGePoint3d ptRSE[2];
	ptRSE[0] = arPts.first();
	ptRSE[1] = arPts.last();

	AcDbVoidPtrArray arCurPtrs, arRes;
	AcDbLine *pLn1 = new AcDbLine(ptLSE[0], ptRSE[0]);
	pLn1->setNormal(AcGeVector3d::kZAxis);
	arCurPtrs.append(pLn1);

	AcDbCurve *pCrv = NULL;
	AecComplexCurve::MakeCurve(elL, pCrv);
	if (pCrv != NULL)
	{
		arCurPtrs.append(pCrv);
	}
	
	pLn1 = new AcDbLine(ptLSE[1], ptRSE[1]);
	pLn1->setNormal(AcGeVector3d::kZAxis);
	arCurPtrs.append(pLn1);

	pCrv = NULL;
	AecComplexCurve::MakeCurve(elR, pCrv);
	if (pCrv != NULL)
	{
		arCurPtrs.append(pCrv);
	}

	pCrv = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs, arRes);
	AcDbPolyline *pPlt = AcDbPolyline::cast(pCrv);

	return pPlt;

	//OLD CODE
	AecComplexCurve draw2d;
	GetDraw2dables(draw2d);

	Point2d pt2d;
	std::vector<Point2d> pt2ds;

	for (int ii = 0;ii < draw2d.length();ii++)
	{
		AecEqui::AecCurveElement& el = draw2d.atByRef(ii);

		pt2d.x = el.ptGe[0].x;pt2d.y = el.ptGe[0].y;
		pt2ds.push_back(pt2d);

		pt2d.x = el.ptGe[2].x;pt2d.y = el.ptGe[2].y;
		pt2ds.push_back(pt2d);
	}

	AcDbPolyline* pPl = new AcDbPolyline;
	pPl->setColorIndex(3);
	std::vector<Point2d> pt2ds2 = convex_hull(pt2ds);
	for (int i = 0;i < pt2ds2.size();i++)
	{
		Point2d pt = pt2ds2.at(i);
		pPl->addVertexAt(i,AcGePoint2d(pt.x,pt.y));
	}
	return pPl;
}

AcDbCurve* AecDbXWall::GetLeftCurve() const
{
	assertReadEnabled();

	BOOL bIsVView = FALSE;
	m_mapSpecXData.GetAt(KEY_VVIEW,bIsVView);
	if (bIsVView)//立面拉出的墙体
	{
		AcDbCurve* pLeft = NULL;
		if (m_pRegion != NULL && m_pBaseCurve != NULL)
		{
			AcDbCurve* pCurve = m_pBaseCurve;
			//1.创建整体Solid
			AcGePoint3d ptOnRegion;
			m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

			AcGePoint3d ptStart(AcGePoint3d::kOrigin);
			pCurve->getStartPoint(ptStart);
			AcGePoint3d ptEnd;
			pCurve->getEndPoint(ptEnd);

			AcGeVector3d vtNormal(AcGeVector3d::kIdentity);
			pCurve->getFirstDeriv(ptStart, vtNormal);

			AcDbRegion* pCloneRegion = (AcDbRegion*)m_pRegion->clone();
			transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptEnd);
			AcDbLine* pLn1 = GetOrthoProjectOnXY(pCloneRegion);
			delete pCloneRegion;
			pLeft = pLn1;
		}
		return pLeft;
	}

	AcDbCurve* pBase = GetBaseCurve();

	//异形截面墙体
	int nShape = 0;
	m_mapSpecXData.GetAt(KEY_SECSHAPE,nShape);
	if (nShape == eUserDef)
	{
		AcGePoint3d ptOnRegion;
		m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

		AcGePoint3d ptStart(AcGePoint3d::kOrigin);
		pBase->getStartPoint(ptStart);
		AcGePoint3d ptEnd;
		pBase->getEndPoint(ptEnd);

		AcGeVector3d vtNormal(AcGeVector3d::kIdentity);
		pBase->getFirstDeriv(ptStart, vtNormal);

		AcDbRegion *pCloneRegion = (AcDbRegion*)m_pRegion->clone();
		if (pCloneRegion != NULL)
		{
			transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptStart);
			AcDbLine* pLn1 = GetOrthoProjectOnXY(pCloneRegion);
			delete pCloneRegion;

			pCloneRegion = (AcDbRegion*)m_pRegion->clone();
			pBase->getFirstDeriv(ptEnd, vtNormal);
			transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptEnd);
			AcDbLine* pLn2 = GetOrthoProjectOnXY(pCloneRegion);
			delete pCloneRegion;

			if (pBase != NULL && pLn1 != NULL && pLn2 != NULL)
			{
				AcGeVector3d vtL;//左线方向
				AcGeVector3d vtT;
				AcDbLine* pLine = AcDbLine::cast(pBase);
				if (pLine != NULL)
				{
					vtL = pLine->endPoint() - pLine->startPoint();
					vtL.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
					vtL.normalize();

					AcGePoint3d ptT;
					vtT = pLn1->endPoint() - pLn1->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn1->startPoint();
						pLn1->setStartPoint(pLn1->endPoint());
						pLn1->setEndPoint(ptT);
					}

					vtT = pLn2->endPoint() - pLn2->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn2->startPoint();
						pLn2->setStartPoint(pLn2->endPoint());
						pLn2->setEndPoint(ptT);
					}

					pLine->setStartPoint(pLn1->endPoint());
					pLine->setEndPoint(pLn2->endPoint());

					delete pLn1;
					delete pLn2;
					return pLine;
				}

				AcDbArc* pArc = AcDbArc::cast(pBase);
				if (pArc != NULL)
				{
					pArc->getStartPoint(ptStart);
					vtL = ptStart - pArc->center();

					AcGePoint3d ptT;
					vtT = pLn1->endPoint() - pLn1->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn1->startPoint();
						pLn1->setStartPoint(pLn1->endPoint());
						pLn1->setEndPoint(ptT);
					}

					ptT = pArc->center();
					ptT.z = 0.0;//orth to xy
					double dR = pLn1->endPoint().distanceTo(ptT);
					pArc->setRadius(dR);
					
					delete pLn1;
					delete pLn2;
					return pArc;
				}

				AcDbCircle* pCir = AcDbCircle::cast(pBase);
				if (pCir != NULL)
				{
					pCir->getStartPoint(ptStart);
					vtL = ptStart - pCir->center();

					AcGePoint3d ptT;
					vtT = pLn1->endPoint() - pLn1->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn1->startPoint();
						pLn1->setStartPoint(pLn1->endPoint());
						pLn1->setEndPoint(ptT);
					}

					ptT = pCir->center();
					ptT.z = 0.0;//orth on xy
					double dR = pLn1->endPoint().distanceTo(ptT);
					pCir->setRadius(dR);

					delete pLn1;
					delete pLn2;
					return pCir;
				}

				//...
			}
		}
		return NULL;
	}

	//标准墙体
	if (pBase != NULL)
	{
		AcGeVector3d vtLine;

		WallData data;
		GetWallData(data);

		AcDbLine* pLine = AcDbLine::cast(pBase);
		if (pLine != NULL)
		{
			vtLine = pLine->endPoint() - pLine->startPoint();

			vtLine.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vtLine.normalize();

			switch(data.kAlign)
			{
			case kLeft:
				{
					break;
				}
			case kMid:
				{
					vtLine *= -0.5 * data.dThick;
					break;
				}
			case kRight:
				{
					vtLine *= -data.dThick;
					break;
				}
			default:
				break;
			}

			AcGeMatrix3d xform;
			xform.setToTranslation(vtLine);
			pLine->setNormal(AcGeVector3d::kZAxis);
			pLine->transformBy(xform);
			return pLine;
		}

		AcDbArc* pArc = AcDbArc::cast(pBase);
		if (pArc != NULL)
		{
			double dR = pArc->radius();

			switch(data.kAlign)
			{
			case kLeft:
				{
					break;
				}
			case kMid:
				{
					pArc->setRadius(dR - 0.5 * data.dThick);
					break;
				}
			case kRight:
				{
					pArc->setRadius(dR - data.dThick);
					break;
				}
			default:
				break;
			}
			return pArc;
		}

		AcDbCircle* pCir = AcDbCircle::cast(pBase);
		if (pCir != NULL)
		{
			AcDbArc* pArcT = new AcDbArc;
			pArcT->setStartAngle(0.0);
			pArcT->setEndAngle(2.0 * PI - 1.e-6);//接近圆

			switch(data.kAlign)
			{
			case kLeft:
				{
					pArcT->setRadius(pCir->radius());
					break;
				}
			case kMid:
				{
					pArcT->setRadius(pCir->radius() - 0.5 * data.dThick);
					break;
				}
			case kRight:
				{
					pArcT->setRadius(pCir->radius() - data.dThick);
					break;
				}
			default:
				break;
			}
			pArcT->setCenter(pCir->center());

			delete pBase;
			return pArcT;
		}

		AcDbEllipse* pEllp = AcDbEllipse::cast(pBase);
		if (pEllp != NULL)
		{
			AcGeVector3d vtMaj = pEllp->majorAxis();
			double radRatio = pEllp->radiusRatio();

			double dMaj = vtMaj.length();
			double dMin = pEllp->minorAxis().length();

			switch(data.kAlign)
			{
			case kLeft:
				{
					break;
				}
			case kMid:
				{
					dMaj -= 0.5 * data.dThick;
					dMin -= 0.5 * data.dThick;
					radRatio = dMin / dMaj;
					break;
				}
			case kRight:
				{
					dMaj -= data.dThick;
					dMin -= data.dThick;
					radRatio = dMin / dMaj;

					break;
				}
			default:
				break;
			}

			vtMaj.normalize();
			vtMaj *= dMaj;
			AcDbEllipse* pEllArc = new AcDbEllipse;
			pEllArc->set(pEllp->center(),pEllp->normal(),vtMaj,radRatio);

			//折算为PL

			delete pBase;
			return pEllArc;
		}

		//其他未知
		delete pBase;
	}
	return NULL;
}

bool AecDbXWall::GetInsideCurves(AcDbVoidPtrArray& arCurves) const
{
	assertReadEnabled();

	//如果是异形截面
	int nShape = 0;
	m_mapSpecXData.GetAt(KEY_SECSHAPE,nShape);
	if (nShape == eUserDef)
	{
		AcDb3dSolid* pSolidDraw = GetDraw3dSolid(false);
		if (pSolidDraw != NULL)
		{
			AcGeMatrix3d xform;
			OrthoProjected3DSolid(pSolidDraw,AcGePlane::kXYPlane,xform,arCurves);
			delete pSolidDraw;
		}
	}

	//立面拉强和内线相交的保留
	BOOL bIsVView = FALSE;
	m_mapSpecXData.GetAt(KEY_VVIEW,bIsVView);
	if (bIsVView)
	{
		AcDbCurve* pRight = NULL;
		if (m_pRegion != NULL && m_pBaseCurve != NULL)
		{
			AcDbCurve* pCurve = m_pBaseCurve;
			//1.创建整体Solid
			AcGePoint3d ptOnRegion;
			m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

			AcGePoint3d ptStart(AcGePoint3d::kOrigin);
			pCurve->getStartPoint(ptStart);
			AcGePoint3d ptEnd;
			pCurve->getEndPoint(ptEnd);

			AcGeVector3d vtNormal(AcGeVector3d::kIdentity);
			pCurve->getFirstDeriv(ptStart, vtNormal);

			AcDbRegion* pCloneRegion = (AcDbRegion*)m_pRegion->clone();
			transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptStart);
			AcDbLine* pLn2 = GetOrthoProjectOnXY(pCloneRegion);
			
			if (pLn2 != NULL)
			{
				AcGePoint3d ptS,ptE,ptOn;
				ptS = pLn2->startPoint();
				ptE = pLn2->endPoint();

				AcDbCurve* pCurve = NULL;
				AcGePoint3dArray arPts;

				for (int i = 0;i < arCurves.length();i++)
				{
					pCurve = (AcDbCurve*)arCurves.at(i);

					arPts.removeAll();
					pLn2->intersectWith(pCurve,AcDb::kOnBothOperands,arPts);

					if (arPts.length() == 1)
					{
						ptOn = arPts.first();

						if (ptS.distanceTo(ptOn) < 1.e-1 ||
							ptE.distanceTo(ptOn) < 1.e-1)
						{
							arCurves.removeAt(i);
							delete pCurve;
							i -= 1;
						}
					}
					else
					{
						arCurves.removeAt(i);
						delete pCurve;
						i -= 1;
					}
				}
			}
			delete pCloneRegion;
		}
	}
	return true;
}

AcDbCurve* AecDbXWall::GetMidCurve() const
{
	assertReadEnabled();

	return GetBaseCurve();
}

AcDbCurve* AecDbXWall::GetRightCurve() const
{
	assertReadEnabled();

	BOOL bIsVView = FALSE;
	m_mapSpecXData.GetAt(KEY_VVIEW,bIsVView);
	if (bIsVView)
	{
		AcDbCurve* pRight = NULL;
		if (m_pRegion != NULL && m_pBaseCurve != NULL)
		{
			AcDbCurve* pCurve = m_pBaseCurve;
			//1.创建整体Solid
			AcGePoint3d ptOnRegion;
			m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

			AcGePoint3d ptStart(AcGePoint3d::kOrigin);
			pCurve->getStartPoint(ptStart);
			AcGePoint3d ptEnd;
			pCurve->getEndPoint(ptEnd);

			AcGeVector3d vtNormal(AcGeVector3d::kIdentity);
			pCurve->getFirstDeriv(ptStart, vtNormal);

			AcDbRegion* pCloneRegion = (AcDbRegion*)m_pRegion->clone();
			transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptStart);
			AcDbLine* pLn2 = GetOrthoProjectOnXY(pCloneRegion);
			pRight = pLn2;
			delete pCloneRegion;
		}
		return pRight;
	}

	AcDbCurve* pBase = GetBaseCurve();

	//异形截面墙体
	//异形截面墙体
	int nShape = 0;
	m_mapSpecXData.GetAt(KEY_SECSHAPE,nShape);
	if (nShape == eUserDef)
	{
		AcGePoint3d ptOnRegion;
		m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

		AcGePoint3d ptStart(AcGePoint3d::kOrigin);
		pBase->getStartPoint(ptStart);
		AcGePoint3d ptEnd;
		pBase->getEndPoint(ptEnd);

		AcGeVector3d vtNormal(AcGeVector3d::kIdentity);
		pBase->getFirstDeriv(ptStart, vtNormal);

		AcDbRegion *pCloneRegion = (AcDbRegion*)m_pRegion->clone();
		if (pCloneRegion != NULL)
		{
			transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptStart);
			AcDbLine* pLn1 = GetOrthoProjectOnXY(pCloneRegion);
			delete pCloneRegion;

			pCloneRegion = (AcDbRegion*)m_pRegion->clone();
			pBase->getFirstDeriv(ptEnd, vtNormal);
			transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptEnd);
			AcDbLine* pLn2 = GetOrthoProjectOnXY(pCloneRegion);
			delete pCloneRegion;

			if (pBase != NULL && pLn1 != NULL && pLn2 != NULL)
			{
				AcGeVector3d vtL;//左线方向
				AcGeVector3d vtT;
				AcDbLine* pLine = AcDbLine::cast(pBase);
				if (pLine != NULL)
				{
					vtL = pLine->endPoint() - pLine->startPoint();
					vtL.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
					vtL.normalize();

					AcGePoint3d ptT;
					vtT = pLn1->endPoint() - pLn1->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn1->startPoint();
						pLn1->setStartPoint(pLn1->endPoint());
						pLn1->setEndPoint(ptT);
					}

					vtT = pLn2->endPoint() - pLn2->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn2->startPoint();
						pLn2->setStartPoint(pLn2->endPoint());
						pLn2->setEndPoint(ptT);
					}

					pLine->setStartPoint(pLn1->startPoint());
					pLine->setEndPoint(pLn2->startPoint());

					delete pLn1;
					delete pLn2;
					return pLine;
				}

				AcDbArc* pArc = AcDbArc::cast(pBase);
				if (pArc != NULL)
				{
					pArc->getStartPoint(ptStart);
					vtL = ptStart - pArc->center();

					AcGePoint3d ptT;
					vtT = pLn1->endPoint() - pLn1->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn1->startPoint();
						pLn1->setStartPoint(pLn1->endPoint());
						pLn1->setEndPoint(ptT);
					}

					ptT = pArc->center();
					ptT.z = 0.0;//orth xy
					double dR = pLn1->startPoint().distanceTo(ptT);
					pArc->setRadius(dR);

					delete pLn1;
					delete pLn2;
					return pArc;
				}

				AcDbCircle* pCir = AcDbCircle::cast(pBase);
				if (pCir != NULL)
				{
					pCir->getStartPoint(ptStart);
					vtL = ptStart - pCir->center();

					AcGePoint3d ptT;
					vtT = pLn1->endPoint() - pLn1->startPoint();
					if (vtT.dotProduct(vtL) > 1.e-10)
					{
					}
					else
					{
						ptT = pLn1->startPoint();
						pLn1->setStartPoint(pLn1->endPoint());
						pLn1->setEndPoint(ptT);
					}

					ptT = pCir->center();
					ptT.z = 0.0;//orth xy
					double dR = pLn1->startPoint().distanceTo(ptT);
					pCir->setRadius(dR);

					delete pLn1;
					delete pLn2;
					return pCir;
				}
				//...
			}
		}
		return NULL;
	}

	//标准墙体
	if (pBase != NULL)
	{
		AcGeVector3d vtLine;

		WallData data;
		GetWallData(data);

		AcDbLine* pLine = AcDbLine::cast(pBase);
		if (pLine != NULL)
		{
			vtLine = pLine->endPoint() - pLine->startPoint();
			
			vtLine.rotateBy(-PI / 2.0,AcGeVector3d::kZAxis);
			vtLine.normalize();

			switch(data.kAlign)
			{
			case kLeft:
				{
					vtLine *= -data.dThick;
					break;
				}
			case kMid:
				{
					vtLine *= -0.5 * data.dThick;
					break;
				}
			case kRight:
				{
					break;
				}
			default:
				break;
			}

			AcGeMatrix3d xform;
			xform.setToTranslation(vtLine);

			pLine->transformBy(xform);
			return pLine;
		}

		AcDbArc* pArc = AcDbArc::cast(pBase);
		if (pArc != NULL)
		{
			double dR = pArc->radius();

			switch(data.kAlign)
			{
			case kLeft:
				{
					pArc->setRadius(dR + data.dThick);
					break;
				}
			case kMid:
				{
					pArc->setRadius(dR + 0.5 * data.dThick);
					break;
				}
			case kRight:
				{
					break;
				}
			default:
				break;
			}
			return pArc;
		}

		AcDbCircle* pCir = AcDbCircle::cast(pBase);
		if (pCir != NULL)
		{
			AcDbArc* pArcT = new AcDbArc;
			pArcT->setStartAngle(0.0);
			pArcT->setEndAngle(2.0 * PI - 1.e-6);//接近圆

			switch(data.kAlign)
			{
			case kLeft:
				{
					pArcT->setRadius(pCir->radius() + data.dThick);
					break;
				}
			case kMid:
				{
					pArcT->setRadius(pCir->radius() + 0.5 * data.dThick);
					break;
				}
			case kRight:
				{
					pArcT->setRadius(pCir->radius());
					break;
				}
			default:
				break;
			}

			pArcT->setCenter(pCir->center());

			delete pBase;
			return pArcT;
		}

		AcDbEllipse* pEllp = AcDbEllipse::cast(pBase);
		if (pEllp != NULL)
		{
			AcGeVector3d vtMaj = pEllp->majorAxis();
			double radRatio = pEllp->radiusRatio();

			double dMaj = vtMaj.length();
			double dMin = pEllp->minorAxis().length();

			switch(data.kAlign)
			{
			case kLeft:
				{
					dMaj += data.dThick;
					dMin += data.dThick;
					radRatio = dMin / dMaj;
					break;
				}
			case kMid:
				{
					dMaj += 0.5 * data.dThick;
					dMin += 0.5 * data.dThick;
					radRatio = dMin / dMaj;
					break;
				}
			case kRight:
				{
					break;
				}
			default:
				break;
			}

			vtMaj.normalize();
			vtMaj *= dMaj;

			AcDbEllipse* pEllArc = new AcDbEllipse;
			pEllArc->set(pEllp->center(),pEllp->normal(),vtMaj,radRatio);

			delete pBase;
			return pEllArc;
		}

		//其他未知
		delete pBase;
	}
	return NULL;
}

AecEqui::AecCurveElement AecDbXWall::GetLeftElement(bool bRealLeft /*= false*/) const
{
	assertReadEnabled();

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	AcDbCurve* pL = GetLeftCurve();
	if (pL != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(pL);
		if (pLn != NULL)
		{
			el.ptGe[0] = pLn->startPoint();
			el.ptGe[1] = pLn->endPoint();
			el.ptGe[2] = pLn->endPoint();
		}

		AcDbArc* pArc = AcDbArc::cast(pL);
		if (pArc != NULL)
		{
			pArc->getStartPoint(el.ptGe[0]);
			pArc->getEndPoint(el.ptGe[2]);
			el.ptGe[1] = GetArcMidPoint(pArc);
		}

		if (m_drawable2d.HasEdage() && pL != NULL && !bRealLeft)//是直线的情况
		{
			AecComplexCurve cmpl;
			m_drawable2d.GetEdage(cmpl);

			AcGeVector3d vt1,vt2;
			for (int j = 0;j < cmpl.length();j++)
			{
				AecEqui::AecCurveElement& eT = cmpl.atByRef(j);

				//判断共线
				if (IsOnCurve(pL,eT))
				{
					el = eT;
					break;
				}
			}
		}

		delete pL;
	}
	return el;
}

AecEqui::AecCurveElement AecDbXWall::GetMidElement() const
{
	assertReadEnabled();

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	AcDbCurve* pL = GetMidCurve();
	if (pL != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(pL);
		if (pLn != NULL)
		{
			el.ptGe[0] = pLn->startPoint();
			el.ptGe[1] = pLn->endPoint();
			el.ptGe[2] = pLn->endPoint();
		}

		AcDbArc* pArc = AcDbArc::cast(pL);
		if (pArc != NULL)
		{
			pArc->getStartPoint(el.ptGe[0]);
			pArc->getEndPoint(el.ptGe[2]);
			el.ptGe[1] = GetArcMidPoint(pArc);
		}
		delete pL;
	}
	return el;
}

AecEqui::AecCurveElement AecDbXWall::GetRightElement(bool bRealRight/* = false*/) const
{
	assertReadEnabled();

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	AcDbCurve* pL = GetRightCurve();
	if (pL != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(pL);
		if (pLn != NULL)
		{
			el.ptGe[0] = pLn->startPoint();
			el.ptGe[1] = pLn->endPoint();
			el.ptGe[2] = pLn->endPoint();
		}

		AcDbArc* pArc = AcDbArc::cast(pL);
		if (pArc != NULL)
		{
			pArc->getStartPoint(el.ptGe[0]);
			pArc->getEndPoint(el.ptGe[2]);
			el.ptGe[1] = GetArcMidPoint(pArc);
		}
		delete pL;
	}

	if (m_drawable2d.HasEdage() && pL != NULL && !bRealRight)//是直线的情况
	{
		AecComplexCurve cmpl;
		m_drawable2d.GetEdage(cmpl);

		AcGeVector3d vt1,vt2;
		for (int j = 0;j < cmpl.length();j++)
		{
			AecEqui::AecCurveElement& eT = cmpl.atByRef(j);

			//判断共线
			vt1 = eT.ptGe[0] - el.ptGe[2];
			vt2 = eT.ptGe[2] - el.ptGe[0];

			if (vt1.isParallelTo(vt2))
			{
				el = eT;
				break;
			}
		}
	}

	return el;
}

static void ConvertToNEls(AcDbCurve* pER,AecComplexCurve& cmpl,int nSegs)
{
	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));


	int nPoints = nSegs + 1;
	double dSta = 0.0,dEnd = 0.0;

	pER->getStartParam(dSta);
	pER->getEndParam(dEnd);

	double dStep = (dEnd - dSta) / nPoints;

	AcGePoint3d pt;
	AcGePoint3dArray arPts;

	for (int i = 0;i < nPoints;i++)
	{
		pER->getPointAtParam(dSta + i * dStep,pt);

		if (!arPts.isEmpty())
		{
			el.ptGe[0] = arPts.last();
			el.ptGe[1] = pt;
			el.ptGe[2] = pt;

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;

			cmpl.append(el);
		}
		arPts.append(pt);
	}
}

AcDbLine* AecDbXWall::GetOrthoProjectOnXY(AcDbRegion* pRegion)
{
	AcDbLine* pLn = NULL;
	if (pRegion != NULL)//前提是Region垂直XY面
	{
		AcGeVector3d vtNorm;
		pRegion->getNormal(vtNorm);

		AcGePlane plan;
		pRegion->getPlane(plan);

		AcGePoint3d ptOrg;
		AcGeVector3d vtX,vtY;
		plan.get(ptOrg,vtX,vtY);

		AcGeLine3d ln;
		ln.set(AcGePoint3d::kOrigin,vtNorm);
		if (ln.isParallelTo(AcGePlane::kXYPlane))
		{
			AcDbExtents ext;
			pRegion->getGeomExtents(ext);

			AcGePoint3d ptSta = ext.minPoint();
			ptSta.z = 0.0;
			AcGePoint3d ptEnd = ext.maxPoint();
			ptEnd.z = 0.0;

			pLn = new AcDbLine;
			pLn->setStartPoint(ptSta);
			pLn->setEndPoint(ptEnd);
		}
	}
	return pLn;
}

void AecDbXWall::GetOrthoProjectOnXY(AcDbRegion* pRegion,AcGePoint3dArray& arPts)
{
	if (pRegion != NULL)
	{
		AcDbVoidPtrArray arEntPtrs;
		pRegion->explode(arEntPtrs);

		AcGePoint3d ptS,ptE;
		AcDbVoidPtrArray arCurs;
		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < arEntPtrs.length();i++)
		{
			pEnt = (AcDbEntity*)arEntPtrs.at(i);
			AcDbCurve* pCurve = AcDbCurve::cast(pEnt);
			if (pCurve != NULL)
			{
				AcDbPolyline* pPl = AcDbPolyline::cast(pCurve);
				if (pPl != NULL)
				{
					for (int i = 0;i < pPl->numVerts();i++)
					{
						pPl->getPointAt(i,ptS);

						if (arPts.find(ptS) == -1)
							arPts.append(ptS);
					}
					delete pPl;
				}
				else
				{
					pCurve->getStartPoint(ptS);
					pCurve->getEndPoint(ptE);

					if (arPts.find(ptS) == -1)
						arPts.append(ptS);

					if (arPts.find(ptE) == -1)
						arPts.append(ptE);
				}
			}
			else
			{
				delete pEnt;
			}
		}
	}
}

bool AecDbXWall::GetStandardDraw2d(AecComplexCurveDraw& draw2d,bool bHasEnd/* = true*/) const
{
	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));
	AecComplexCurve cmpl;

	BOOL bIsVView = FALSE;
	m_mapSpecXData.GetAt(KEY_VVIEW,bIsVView);
	if (bIsVView)//立面墙体
	{
		//
		AcDbRegion* pRegionWall = m_pRegion;
		AcDbCurve* pCurve = m_pBaseCurve;

		if (pRegionWall != NULL && pCurve != NULL)
		{
			//1.创建整体Solid
			AcGePoint3d ptOnRegion;
			m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

			AcGePoint3d ptStart(AcGePoint3d::kOrigin);
			pCurve->getStartPoint(ptStart);
			AcGePoint3d ptEnd;
			pCurve->getEndPoint(ptEnd);

			AcGeVector3d vtNormal(AcGeVector3d::kIdentity);
			pCurve->getFirstDeriv(ptStart, vtNormal);

			AcDbRegion *pCloneRegion = (AcDbRegion*)m_pRegion->clone();
			if (pCloneRegion != NULL)
			{
				transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptStart);
				AcDbLine* pLn1 = GetOrthoProjectOnXY(pCloneRegion);
				delete pCloneRegion;

				pCloneRegion = (AcDbRegion*)m_pRegion->clone();
				transfromRegion(pCloneRegion, ptOnRegion, vtNormal, ptEnd);
				AcDbLine* pLn2 = GetOrthoProjectOnXY(pCloneRegion);
				delete pCloneRegion;

				if (pLn1 != NULL)
				{
					el.ptGe[0] = pLn1->startPoint();
					el.ptGe[1] = pLn1->endPoint();
					el.ptGe[2] = el.ptGe[1];

					el.ptGe[0].z = 0.0;
					el.ptGe[1].z = 0.0;
					el.ptGe[2].z = 0.0;

					cmpl.append(el);
				}

				if (pLn2 != NULL)
				{
					el.ptGe[0] = pLn2->startPoint();
					el.ptGe[1] = pLn2->endPoint();
					el.ptGe[2] = el.ptGe[1];

					el.ptGe[0].z = 0.0;
					el.ptGe[1].z = 0.0;
					el.ptGe[2].z = 0.0;

					cmpl.append(el);
				}

				if (pLn1 != NULL && pLn2 != NULL)
				{
					el.ptGe[0] = pLn1->startPoint();
					el.ptGe[1] = pLn2->startPoint();
					el.ptGe[2] = el.ptGe[1];

					el.ptGe[0].z = 0.0;
					el.ptGe[1].z = 0.0;
					el.ptGe[2].z = 0.0;

					cmpl.append(el);

					el.ptGe[0] = pLn1->endPoint();
					el.ptGe[1] = pLn2->endPoint();
					el.ptGe[2] = el.ptGe[1];

					el.ptGe[0].z = 0.0;
					el.ptGe[1].z = 0.0;
					el.ptGe[2].z = 0.0;

					cmpl.append(el);

					delete pLn1;delete pLn2;
				}
				
			}
		}
		if (!cmpl.isEmpty())
		{
			cmpl.OrthoProjectedToXYPlane();
			draw2d.SetEdage(cmpl);
		}
		return !cmpl.isEmpty();
	}

	//标准墙体
	AcDbCurve* pLeft = GetLeftCurve();
	AcDbCurve* pRight = GetRightCurve();

	if (pLeft != NULL && pRight != NULL)
	{
		//直墙
		AcDbLine* pLnL = AcDbLine::cast(pLeft);
		AcDbLine* pLnR = AcDbLine::cast(pRight);
		if (pLnL != NULL && pLnR != NULL)
		{
			el.ptGe[0] = pLnL->startPoint();
			el.ptGe[1] = pLnL->endPoint();
			el.ptGe[2] = el.ptGe[1];

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;

			cmpl.append(el);

			el.ptGe[0] = pLnR->startPoint();
			el.ptGe[1] = pLnR->endPoint();
			el.ptGe[2] = el.ptGe[1];

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;

			cmpl.append(el);
		}

		//弧形墙
		AcDbArc* pArcL = AcDbArc::cast(pLeft);
		AcDbArc* pArcR = AcDbArc::cast(pRight);
		if (pArcL != NULL && pArcR != NULL)
		{
			if (m_pBaseCurve->isKindOf(AcDbCircle::desc()))//圆墙
			{
				//L
				AcGePoint3d ptCen = pArcL->center();
				double dR = pArcL->radius();

				el.ptGe[0] = ptCen;
				el.ptGe[0].x += dR;

				el.ptGe[1] = ptCen;
				el.ptGe[1].y += dR;

				el.ptGe[2] = ptCen;
				el.ptGe[2].x -= dR;

				el.ptGe[0].z = 0.0;
				el.ptGe[1].z = 0.0;
				el.ptGe[2].z = 0.0;
				cmpl.append(el);

				el.ptGe[1].y -= 2.0 * dR;
				cmpl.append(el);

				ptCen = pArcR->center();
				dR = pArcR->radius();

				el.ptGe[0] = ptCen;
				el.ptGe[0].x += dR;

				el.ptGe[1] = ptCen;
				el.ptGe[1].y += dR;

				el.ptGe[2] = ptCen;
				el.ptGe[2].x -= dR;
				cmpl.append(el);

				el.ptGe[1].y -= 2.0 * dR;
				cmpl.append(el);
			}
			else
			{
				pArcL->getStartPoint(el.ptGe[0]);
				pArcL->getEndPoint(el.ptGe[2]);
				el.ptGe[1] = GetArcMidPoint(pArcL);

				el.ptGe[0].z = 0.0;
				el.ptGe[1].z = 0.0;
				el.ptGe[2].z = 0.0;
				cmpl.append(el);

				pArcR->getStartPoint(el.ptGe[0]);
				pArcR->getEndPoint(el.ptGe[2]);
				el.ptGe[1] = GetArcMidPoint(pArcR);

				el.ptGe[0].z = 0.0;
				el.ptGe[1].z = 0.0;
				el.ptGe[2].z = 0.0;
				cmpl.append(el);
			}
		}

		AcDbCircle* pCirL = AcDbCircle::cast(pLeft);
		AcDbCircle* pCirR = AcDbCircle::cast(pRight);
		if (pCirL != NULL && pCirR != NULL)
		{
			//L
			AcGePoint3d ptCen = pCirL->center();
			double dR = pCirL->radius();

			el.ptGe[0] = ptCen;
			el.ptGe[0].x += dR;

			el.ptGe[1] = ptCen;
			el.ptGe[1].y += dR;

			el.ptGe[2] = ptCen;
			el.ptGe[2].x -= dR;

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;
			cmpl.append(el);

			el.ptGe[1].y -= 2.0 * dR;
			cmpl.append(el);

			ptCen = pCirL->center();
			dR = pCirR->radius();

			el.ptGe[0] = ptCen;
			el.ptGe[0].x += dR;

			el.ptGe[1] = ptCen;
			el.ptGe[1].y += dR;

			el.ptGe[2] = ptCen;
			el.ptGe[2].x -= dR;
			cmpl.append(el);

			el.ptGe[1].y -= 2.0 * dR;
			cmpl.append(el);
		}

		AcDbEllipse* pEL = AcDbEllipse::cast(pLeft);
		AcDbEllipse* pER = AcDbEllipse::cast(pRight);
		if (pEL != NULL && pER != NULL)
		{
			//变成n根直线段
			ConvertToNEls(pEL,cmpl,40);
			ConvertToNEls(pER,cmpl,40);
		}

		//圆墙已经折算成弧墙0-359.98888
		if (m_pBaseCurve->isKindOf(AcDbCircle::desc()) ||//圆墙
			m_pBaseCurve->isKindOf(AcDbEllipse::desc()))//椭圆墙
		{
			//...
		}
		else
		{
			//封口线
			AecComplexCurve cmplSE;
			pLeft->getStartPoint(el.ptGe[0]);
			pRight->getStartPoint(el.ptGe[1]);
			el.ptGe[2] = el.ptGe[1];
			el.gsMark = 1;

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;

			if (bHasEnd) cmpl.append(el);
			cmplSE.append(el);

			pLeft->getEndPoint(el.ptGe[0]);
			pRight->getEndPoint(el.ptGe[1]);
			el.ptGe[2] = el.ptGe[1];
			el.gsMark = 2;

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;

			if (bHasEnd) cmpl.append(el);
			cmplSE.append(el);
			
			cmplSE.OrthoProjectedToXYPlane();
			m_2dHideTail.SetEdage(cmplSE);
		}

		//
		cmpl.OrthoProjectedToXYPlane();
		draw2d.SetEdage(cmpl);
		delete pLeft;
		delete pRight;
	}

	return true;
}

bool AecDbXWall::GetStandardDraw2d(AecComplexCurve& draw2d,bool bHasEnd/* = true*/) const
{
	assertReadEnabled();

	AecComplexCurveDraw edge;
	GetStandardDraw2d(edge,bHasEnd);

	edge.GetEdage(draw2d);
	return true;
}

bool AecDbXWall::GetStandardDraw2d(AcDbVoidPtrArray& draw2d,bool bHasEnd/* = true*/) const
{
	BOOL bIsVView = FALSE;
	m_mapSpecXData.GetAt(KEY_VVIEW,bIsVView);
	if (bIsVView)
	{
		AcDbRegion* pRegionWall = m_pRegion;
		AcDbCurve* pCurve = m_pBaseCurve;

		if (pRegionWall != NULL && pCurve != NULL)
		{
			//1.创建整体Solid
			AcGePoint3d ptOnRegion;
			m_mapSpecXData.GetAt(KEY_SECCEN,ptOnRegion);

			double dSta = 0.0;
			pCurve->getStartParam(dSta);

			AcGeVector3d vtDir;
			pCurve->getFirstDeriv(dSta,vtDir);

			AcGePoint3d ptOnPlan;
			pCurve->getStartPoint(ptOnPlan);

			AcGeVector3d vtNormReg;
			pRegionWall->getNormal(vtNormReg);

			if (vtNormReg.isParallelTo(vtDir))//平行,立面拉成的墙体
			{
				//立面墙体
				AcDbVoidPtrArray arCurPtrs,arRelt;
				pRegionWall->explode(arCurPtrs);

				//取出点
				AcGePoint3d pt1,pt2;
				AcGePoint3dArray arPts;

				AcDbCurve* pCrvTmp = NULL;
				for (int k = 0;k < arCurPtrs.length();k++)
				{
					pCrvTmp = (AcDbCurve*)arCurPtrs.at(k);
					if (pCrvTmp != NULL)
					{
						pCrvTmp->getStartPoint(pt1);
						pCrvTmp->getEndPoint(pt2);

						//投影到XY
						pt1.z = 0.0;
						pt2.z = 0.0;

						if (arPts.find(pt1) == -1)
						{
							arPts.append(pt1);
						}

						if (arPts.find(pt2) == -1)
						{
							arPts.append(pt2);
						}
					}
				}

				if (!arPts.isEmpty())
				{
					AecCoverBooleanOper::SortPoints(arPts,pCrvTmp);
					pt1 = arPts.first();
					pt2 = arPts.last();

					AcDbLine* pLn = AcDbLine::cast(m_pBaseCurve);
					if (pLn != NULL)
					{
						AecEqui::AecCurveElement el;
						memset(&el,0,sizeof(AecEqui::AecCurveElement));

						AcGeVector3d vtV = pLn->endPoint() - pLn->startPoint();
						AcGeVector3d vtL = pt2 - pt1;
						AcGeVector3d vtLV = vtL;vtLV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
						if (!vtLV.isCodirectionalTo(vtV))
							vtV.negate();

						AcDbLine* pLn = NULL;
						el.ptGe[0] = pt1;
						el.ptGe[0] += 0.5 * vtV;
						el.ptGe[1] = pt2;
						el.ptGe[1] += 0.5 * vtV;
						el.ptGe[2] = el.ptGe[1];

						el.ptGe[0].z = 0.0;
						el.ptGe[1].z = 0.0;
						el.ptGe[2].z = 0.0;

						AecComplexCurve::MakeLine(el,pLn);
						if (pLn != NULL)
						{
							pLn->setNormal(AcGeVector3d::kZAxis);
							draw2d.append(pLn);
						}

						pLn = NULL;
						el.ptGe[0] = pt1;
						el.ptGe[0] -= 0.5 * vtV;
						el.ptGe[1] = pt2;
						el.ptGe[1] -= 0.5 * vtV;
						el.ptGe[2] = el.ptGe[1];

						el.ptGe[0].z = 0.0;
						el.ptGe[1].z = 0.0;
						el.ptGe[2].z = 0.0;

						AecComplexCurve::MakeLine(el,pLn);
						if (pLn != NULL)
						{
							pLn->setNormal(AcGeVector3d::kZAxis);
							draw2d.append(pLn);
						}

						//端线
						pLn = NULL;
						el.ptGe[0] = pt1;
						el.ptGe[0] += 0.5 * vtV;
						el.ptGe[1] = pt1;
						el.ptGe[1] -= 0.5 * vtV;
						el.ptGe[2] = el.ptGe[1];

						el.ptGe[0].z = 0.0;
						el.ptGe[1].z = 0.0;
						el.ptGe[2].z = 0.0;

						AecComplexCurve::MakeLine(el,pLn);
						if (pLn != NULL)
						{
							pLn->setNormal(AcGeVector3d::kZAxis);
							draw2d.append(pLn);
						}

						pLn = NULL;
						el.ptGe[0] = pt2;
						el.ptGe[0] += 0.5 * vtV;
						el.ptGe[1] = pt2;
						el.ptGe[1] -= 0.5 * vtV;
						el.ptGe[2] = el.ptGe[1];

						el.ptGe[0].z = 0.0;
						el.ptGe[1].z = 0.0;
						el.ptGe[2].z = 0.0;

						AecComplexCurve::MakeLine(el,pLn);
						if (pLn != NULL)
						{
							pLn->setNormal(AcGeVector3d::kZAxis);
							draw2d.append(pLn);
						}
					}
				}
				FreeBuffer(0,arCurPtrs);
			}
		}
		return !draw2d.isEmpty();
	}

	//异形截面墙体
	//标准墙体
	AcDbCurve* pLeft = GetLeftCurve();
	AcDbCurve* pRight = GetRightCurve();

	if (pLeft != NULL && pRight != NULL)
	{
		//直墙
		AcDbLine* pLnL = AcDbLine::cast(pLeft);
		AcDbLine* pLnR = AcDbLine::cast(pRight);
		if (pLnL != NULL && pLnR != NULL)
		{
			draw2d.append(pLeft);
			draw2d.append(pRight);
		}

		//弧形墙
		AcDbArc* pArcL = AcDbArc::cast(pLeft);
		AcDbArc* pArcR = AcDbArc::cast(pRight);
		if (pArcL != NULL && pArcR != NULL)
		{
			draw2d.append(pLeft);
			draw2d.append(pRight);
		}

		//圆墙 已经折算成弧墙 0-359.9888

		AecEqui::AecCurveElement el;
		memset(&el,0,sizeof(AecEqui::AecCurveElement));

		//封口线
		if (bHasEnd)
		{
			AcDbLine* pLnT = NULL;
			pLeft->getStartPoint(el.ptGe[0]);
			pRight->getStartPoint(el.ptGe[1]);

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;

			pLnT = new AcDbLine(el.ptGe[0],el.ptGe[1]);
			pLnT->setNormal(AcGeVector3d::kZAxis);
			draw2d.append(pLnT);

			pLeft->getEndPoint(el.ptGe[0]);
			pRight->getEndPoint(el.ptGe[1]);

			el.ptGe[0].z = 0.0;
			el.ptGe[1].z = 0.0;
			el.ptGe[2].z = 0.0;

			pLnT = new AcDbLine(el.ptGe[0],el.ptGe[1]);
			pLnT->setNormal(AcGeVector3d::kZAxis);
			draw2d.append(pLnT);
		}
	}
	return true;
}

//标准封闭的墙线
bool AecDbXWall::GetStandardDraw2d(AcDbPolyline *&pPL) const
{
	assertReadEnabled();

	AcDbVoidPtrArray arCurPtrs;
	GetStandardDraw2d(arCurPtrs, true);

	AcDbVoidPtrArray arRes;
	
	AcDbCurve* pCrv = KTCADUtilityEx::ConvertBoundCurve(arCurPtrs, arRes);
	if (pCrv != NULL)
	{
		pPL = AcDbPolyline::cast(pCrv);
	}

	return (pPL != NULL) ? true : false;
}

bool AecDbXWall::GetStandardDraw2d()
{
	assertWriteEnabled();
	
	AecComplexCurve cmpl;
	m_drawable2d.SetEdage(cmpl);
	return GetStandardDraw2d(m_drawable2d);
}

void AecDbXWall::SetDraw2dables(const AecComplexCurve& draw2d)
{
	AssertWriteEnabled();

	int nColor = kColorByLayer;
	m_mapSpecXData.GetAt(_T("COLOR"), nColor);
	
	m_drawable2d.SetEdage(draw2d);
	m_drawable2d.SetColor(nColor);
	if (draw2d.isEmpty())
	{
		//端部标记也置空
		m_2dHideTail.SetEdage(draw2d);
	}
}

void ComplexCurveAddCurSpace(const AecComplexCurve& draw2dWall,int nColor)
{
	AcDbCurve* pCurve = NULL;
	for (int i = 0;i < draw2dWall.length();i++)
	{
		const AecEqui::AecCurveElement& el = draw2dWall.at(i);

		pCurve = NULL;
		AecComplexCurve::MakeCurve(el,pCurve);

		if (pCurve != NULL)
		{
			pCurve->setColorIndex(nColor);
			AddToModelSpace(pCurve);
		}
	}
}

void AecDbXWall::SubtractDraw2d(const AecComplexCurve& cmplSub)
{
	AecComplexCurve draw2dWall;
	GetDraw2dables(draw2dWall);

	//TEST
	//ComplexCurveAddCurSpace(draw2dWall,1);
	//ComplexCurveAddCurSpace(cmplSub,2);

	AecCoverBooleanOper::BoolSubtract(draw2dWall,cmplSub);
	SetDraw2dables(draw2dWall);

	//ComplexCurveAddCurSpace(draw2dWall,3);
}

/*
* 涉及命令 PL_ZJCH  PL_DXCH 2024-05-15
*/
void AecDbXWall::SubtractXOpeningDraw2d(AecComplexCurveDraw& draw2d) const
{
	assertReadEnabled();

	AecComplexCurve cmplDraw2d;
	draw2d.GetEdage(cmplDraw2d);

	AcDb3dSolid *pSolidPart = NULL;
	AcDbObjectId id;
	AcDbEntity *pEnt = NULL;

	Acad::ErrorStatus es;
	for (int i = 0; i < m_arAssocPartEntIds.length(); i++)
	{
		id = m_arAssocPartEntIds.at(i);
		if (Acad::eOk == (es = acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead)))
		{
			AecDbZLineXOpening *pZXOpen = AecDbZLineXOpening::cast(pEnt);
			if (pZXOpen != NULL)
			{
				AecComplexCurve win2d;
				pZXOpen->GetStandardDraw2d(win2d, false);

				AecCoverBooleanOper::BoolSubtract(cmplDraw2d, win2d);
			}
			pEnt->close();
		}
	}

	draw2d.RemoveEdage();
	draw2d.SetEdage(cmplDraw2d);
}

void AecDbXWall::BoolUniteDraw2d(const AecComplexCurve& cmplUnt)
{
	AecComplexCurve draw2dWall;
	GetDraw2dables(draw2dWall);

	AecCoverBooleanOper::BoolUnite(draw2dWall,cmplUnt);
	SetDraw2dables(draw2dWall);
}

void AecDbXWall::AppendDraw2d(const AecComplexCurve& cmpl)
{
	AecComplexCurve cmplDraw;
	m_drawable2d.GetEdage(cmplDraw);

	AssertWriteEnabled();
	cmplDraw.append(cmpl);
	m_drawable2d.SetEdage(cmplDraw);

	int nColor = kColorByLayer;
	m_mapSpecXData.GetAt(_T("COLOR"), nColor);
	m_drawable2d.SetColor(nColor);
}

void AecDbXWall::AddLineBreakSegment(AcGePoint3d& pt1,AcGePoint3d& pt2)
{
	assertWriteEnabled();
	Clean2DBuffer();

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	double dW = 0.0;
	m_mapSpecXData.GetAt(KEY_PLOTW,dW);

	pt1.z = 0.0;pt2.z = 0.0;
	el.dWidth = dW;
	el.ptGe[0] = pt1;
	el.ptGe[1] = pt2;
	el.ptGe[2] = pt2;

	el.ptGe[0].z = 0.0;
	el.ptGe[1].z = 0.0;
	el.ptGe[2].z = 0.0;

	el.bHided = TRUE;

	AecComplexCurve& cmpl = m_drawable2d.GetRefEdage();
	if (cmpl.length() > 0)
	{
		AecEqui::AecCurveElement& el0 = cmpl.atByRef(0);
		el.dWidth = el0.dWidth;
	}

	cmpl.append(el);
	cmpl.merge();
	cmpl.boolSubtract();
}

void AecDbXWall::AddArcBreakSegment(AcGePoint3d& pt1,AcGePoint3d& ptMid,AcGePoint3d& pt2)
{
	assertWriteEnabled();
	Clean2DBuffer();

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	double dW = 0.0;
	m_mapSpecXData.GetAt(KEY_PLOTW,dW);

	pt1.z = 0.0;pt2.z = 0.0;ptMid.z = 0.0;
	el.dWidth = dW;
	el.ptGe[0] = pt1;
	el.ptGe[1] = ptMid;
	el.ptGe[2] = pt2;

	el.ptGe[0].z = 0.0;
	el.ptGe[1].z = 0.0;
	el.ptGe[2].z = 0.0;

	el.bHided = TRUE;

	AecComplexCurve& cmpl = m_drawable2d.GetRefEdage();
	if (cmpl.length() > 0)
	{
		AecEqui::AecCurveElement& el0 = cmpl.atByRef(0);
		el.dWidth = el0.dWidth;
	}

	cmpl.append(el);
	cmpl.merge();
	cmpl.boolSubtract();
}

void AecDbXWall::AddLineDashedSegment(AcGePoint3d& pt1,AcGePoint3d& pt2)
{
	assertWriteEnabled();
	Clean2DBuffer();

	//先擦除
	AddLineBreakSegment(pt1,pt2);

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	double dW = 0.0;
	m_mapSpecXData.GetAt(KEY_PLOTW,dW);

	pt1.z = 0.0;pt2.z = 0.0;
	el.dWidth = dW;
	el.ptGe[0] = pt1;
	el.ptGe[1] = pt2;
	el.ptGe[2] = pt2;

	el.ptGe[0].z = 0.0;
	el.ptGe[1].z = 0.0;
	el.ptGe[2].z = 0.0;

	el.bHided = FALSE;
	el.idSubLay = layerId();
	el.idSubLty = KTSetting::InitLineStyle(_T("DASHED"));

	AecComplexCurve& cmpl = m_drawable2d.GetRefEdage();
	if (cmpl.length() > 0)
	{
		AecEqui::AecCurveElement& el0 = cmpl.atByRef(0);
		el.dWidth = el0.dWidth;
	}
	cmpl.append(el);
}

void AecDbXWall::AddArcDashedSegment(AcGePoint3d& pt1,AcGePoint3d& ptMid,AcGePoint3d& pt2)
{
	assertWriteEnabled();
	Clean2DBuffer();

	AddArcBreakSegment(pt1,ptMid,pt2);

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	double dW = 0.0;
	m_mapSpecXData.GetAt(KEY_PLOTW,dW);

	pt1.z = 0.0;pt2.z = 0.0;ptMid.z = 0.0;
	el.dWidth = dW;
	el.ptGe[0] = pt1;
	el.ptGe[1] = ptMid;
	el.ptGe[2] = pt2;

	el.ptGe[0].z = 0.0;
	el.ptGe[1].z = 0.0;
	el.ptGe[2].z = 0.0;

	el.bHided = FALSE;
	el.idSubLay = layerId();
	el.idSubLty = KTSetting::InitLineStyle(_T("DASHED"));

	AecComplexCurve& cmpl = m_drawable2d.GetRefEdage();
	if (cmpl.length() > 0)
	{
		AecEqui::AecCurveElement& el0 = cmpl.atByRef(0);
		el.dWidth = el0.dWidth;
	}
	cmpl.append(el);
}

void AecDbXWall::AddLineSegment(AcGePoint3d& pt1,AcGePoint3d& pt2)
{
	assertWriteEnabled();
	Clean2DBuffer();

	//先擦除
	AddLineBreakSegment(pt1,pt2);

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	double dW = 0.0;
	m_mapSpecXData.GetAt(KEY_PLOTW,dW);

	pt1.z = 0.0;pt2.z = 0.0;
	el.dWidth = dW;
	el.ptGe[0] = pt1;
	el.ptGe[1] = pt2;
	el.ptGe[2] = pt2;
	el.bHided = FALSE;
	el.idSubLay = layerId();
	el.idSubLty = linetypeId();

	el.ptGe[0].z = 0.0;
	el.ptGe[1].z = 0.0;
	el.ptGe[2].z = 0.0;

	AecComplexCurve& cmpl = m_drawable2d.GetRefEdage();
	if (cmpl.length() > 0)
	{
		AecEqui::AecCurveElement& el0 = cmpl.atByRef(0);
		el.dWidth = el0.dWidth;
	}
	cmpl.append(el);
}

void AecDbXWall::AddArcSegment(AcGePoint3d& pt1,AcGePoint3d& ptMid,AcGePoint3d& pt2)
{
	assertWriteEnabled();
	Clean2DBuffer();

	AddArcBreakSegment(pt1,ptMid,pt2);

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	double dW = 0.0;
	m_mapSpecXData.GetAt(KEY_PLOTW,dW);

	pt1.z = 0.0;pt2.z = 0.0;ptMid.z = 0.0;
	el.dWidth = dW;
	el.ptGe[0] = pt1;
	el.ptGe[1] = ptMid;
	el.ptGe[2] = pt2;
	el.bHided = 0;
	el.idSubLay = layerId();
	el.idSubLty = linetypeId();

	el.ptGe[0].z = 0.0;
	el.ptGe[1].z = 0.0;
	el.ptGe[2].z = 0.0;

	AecComplexCurve& cmpl = m_drawable2d.GetRefEdage();
	if (cmpl.length() > 0)
	{
		AecEqui::AecCurveElement& el0 = cmpl.atByRef(0);
		el.dWidth = el0.dWidth;
	}
	cmpl.append(el);
}

Acad::ErrorStatus AecDbXWall::ClearForDraw2dables()
{
	AssertWriteEnabled();

	m_drawable2d.RemoveEdage();

	//端部标记也置空
	m_2dHideTail.RemoveEdage();
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::extend(double newParam)
{
	AssertWriteEnabled();

	Acad::ErrorStatus es = AecDbEwPipeBase::extend(newParam);
	if (es == Acad::eOk)
	{
		//EXTEND 需要ClearFor...工艺视图 AecWall2DJoin::Extend 不需要ClearFor... 矛盾
		struct resbuf rb;
		acedGetVar(_T("CMDNAMES"),&rb);
		if (_tcscmp(rb.resval.rstring,_T("EXTEND")) == 0)
		{
			ClearForDraw2dables();
		}
	}
	return es;
}

Acad::ErrorStatus AecDbXWall::extend(Adesk::Boolean extendStart, const AcGePoint3d& toPoint)
{
	AssertWriteEnabled();

	Acad::ErrorStatus es = AecDbEwPipeBase::extend(extendStart,toPoint);
	if (es == Acad::eOk)
	{
		//EXTEND 需要ClearFor...工艺视图 AecWall2DJoin::Extend 不需要ClearFor... 矛盾
		struct resbuf rb;
		acedGetVar(_T("CMDNAMES"),&rb);
		if (_tcscmp(rb.resval.rstring,_T("EXTEND")) == 0)
		{
			ClearForDraw2dables();
		}
	}
	return es;
}

Acad::ErrorStatus AecDbXWall::subErase(Adesk::Boolean erasing)
{
	if (erasing)
	{
		GripMessage msg;
		memset(&msg,0,sizeof(GripMessage));
		msg.nType = 6;
		msg.idHost = objectId();
		msg.idAsso = objectId();
		msg.ptGrip = StartPoint();
		msg.ptRelt = EndPoint();

		WallData* pWdata = new WallData;
		memset(pWdata,0,sizeof(WallData));
		GetWallData(*pWdata);

		msg.nData = 0;
		msg.pParam = pWdata;
		msg.fData = 0.0;

		//PushGripMessage(msg);

		//墙体复原
		//if ( IsWall2DJoin() )
		//{
			//acedPostCommand(_T("\x03"));
			//acedPostCommand(_T("PL_QTFY\n"));
		//}
	}
	return 	AecDbBDPipeBase::subErase(erasing);
}

bool AecDbXWall::IsWall2DJoin()
{
	AcGePoint3d ptS = StartPoint();
	AcGePoint3d ptE = EndPoint();

	AcGeVector3d vtS,vtE;
	getFirstDeriv(ptS,vtS);
	vtS.negate();//向外
	
	getFirstDeriv(ptE,vtE);
	
	AcDbRay ray1;
	ray1.setBasePoint(ptS);
	ray1.setUnitDir(vtS);

	AcDbRay ray2;
	ray2.setBasePoint(ptE);
	ray2.setUnitDir(vtE);

	AcGePoint3dArray arPts;
	const AcDbVoidPtrArray& ar2D = Get2DBuffer();
	for (int i = 0;i < ar2D.length();i++)
	{
		AcDbEntity* pEnt = (AcDbEntity*)ar2D.at(i);
		ray1.intersectWith(pEnt,AcDb::kOnBothOperands,AcGePlane::kXYPlane,arPts);
		ray2.intersectWith(pEnt,AcDb::kOnBothOperands,AcGePlane::kXYPlane,arPts);
	}

	if (arPts.length() < 2)
		return true;

	return false;
}

void AecDbXWall::RemoveTailDraw2d(const AcGePoint3d& ptPos)
{
	AssertWriteEnabled();

	AcGePoint3d ptMid;
	double dDist = 0.0;

	//WallData data;
	//GetWallData(data);

	//调整到起始点
	AcGePoint3d ptOn;
	getClosestPointTo(ptPos,ptOn,Adesk::kFalse);

	AcGePoint3d ptS,ptE;
	getStartPoint(ptS);
	getEndPoint(ptE);

	double dDis1 = ptOn.distanceTo(ptS);
	double dDis2 = ptOn.distanceTo(ptE);

	if (dDis1 < dDis2)
	{
		ptOn = ptS;
	}
	else
	{
		ptOn = ptE;
	}

	//TEST
	//AcDbCircle* pCir = new AcDbCircle;
	//pCir->setCenter(ptOn);
	//pCir->setRadius(10.0);
	//AddToModelSpace(pCir);
	
	bool bRemoved = false;
	AcGeVector3d vt1,vt2;
	AecComplexCurve& cmpl = m_2dHideTail.GetRefEdage();
	for (int i = 0;i < cmpl.length();i++)
	{
		AecEqui::AecCurveElement& elT = cmpl.atByRef(i);
		
		//判断ptOn 落在elT上
		vt1 = elT.ptGe[0] - ptOn;
		vt2 = elT.ptGe[2] - ptOn;
		if (vt1.isParallelTo(vt2) && !vt1.isCodirectionalTo(vt2))
		{
			cmpl.removeAt(i);
			break;
		}
	}

	AecComplexCurve& cmpl2 = m_drawable2d.GetRefEdage();
	for (int i = 0;i < cmpl2.length();i++)
	{
		AecEqui::AecCurveElement& elT = cmpl2.atByRef(i);

		//判断ptOn 落在elT上
		vt1 = elT.ptGe[0] - ptOn;
		vt2 = elT.ptGe[2] - ptOn;
		if (vt1.isParallelTo(vt2) && !vt1.isCodirectionalTo(vt2))
		{
			cmpl2.removeAt(i);
			break;
		}
	}

	int nPos1 = -1;
	int nPos = GetNearPosition(ptPos);
	RemoveAddtionShow3dPart(nPos);

	/*//移除补上的窟窿
	BOOL bAddShow = FALSE;
	AecDbX3dPart* pPart = NULL;
	for (int i = 0;i < m_arX3DPartPtrs.length();i++)
	{
		pPart = m_arX3DPartPtrs.at(i);
		pPart->GetSpecialtyData()->GetAt(KEY_ADDTIONSHOW,bAddShow);
		if (bAddShow)
		{
			pPart->GetSpecialtyData()->GetAt(KEY_POS,nPos1);
			if (nPos == nPos1 && nPos1 > -1)
			{
				m_arX3DPartPtrs.removeAt(i);
				delete pPart;
				i -= 1;
			}
		}
	}*/
}

bool AecDbXWall::RemoveAddtionShow3dPart(int nPos)
{
	AssertWriteEnabled();

	int nPos1 = -1;

	//移除补上的窟窿
	BOOL bAddShow = FALSE;
	AecDbX3dPart* pPart = NULL;
	for (int i = 0;i < m_arX3DPartPtrs.length();i++)
	{
		pPart = m_arX3DPartPtrs.at(i);
		pPart->GetSpecialtyData()->GetAt(KEY_ADDTIONSHOW,bAddShow);
		if (bAddShow)
		{
			pPart->GetSpecialtyData()->GetAt(KEY_POS,nPos1);
			if (nPos == nPos1 && nPos1 > -1)
			{
				m_arX3DPartPtrs.removeAt(i);
				delete pPart;
				i -= 1;
			}
		}
	}
	return true;
}

bool AecDbXWall::GetTailDraw2d(const AcGePoint3d& ptPos,AecEqui::AecCurveElement& el) const
{
	assertReadEnabled();

	AecComplexCurve cmpL;
	GetDrawable2dLeft(cmpL);

	AecComplexCurve cmpR;
	GetDrawable2dRight(cmpR);

	//获取两头的点
	AcGePoint3d ptLSE[2];
	bool bL = GetTailLineElement(ptLSE,cmpL);

	//获取两头的点
	AcGePoint3d ptRSE[2];
	bool bR = GetTailLineElement(ptRSE,cmpR);

	//
	double dDis1 = ptPos.distanceTo(MidPoint(ptLSE[0],ptRSE[0]));
	double dDis2 = ptPos.distanceTo(MidPoint(ptLSE[1],ptRSE[1]));

	if (dDis1 < dDis2)
	{
		el.ptGe[0] = ptLSE[0];
		el.ptGe[1] = ptRSE[0];
		el.ptGe[2] = ptRSE[0];
	}
	else
	{
		el.ptGe[0] = ptLSE[1];
		el.ptGe[1] = ptRSE[1];
		el.ptGe[2] = ptRSE[1];
	}
	return true;
}

void AecDbXWall::SetInsulation(int nPos, InsulData &data)
{
	assertWriteEnabled();

	CString sKey;
	sKey.Format(_T("%s%d"), PIPE_INSTHICK, nPos);
	m_mapSpecXData.SetAt(sKey, data.dThick);

	sKey.Format(_T("%s%dSP"), PIPE_INSTHICK, nPos);
	m_mapSpecXData.SetAt(sKey, _T("界面处理剂;粘接层;保温层;抗裂保护层;耐碱网格布;柔性腻子层;饰面层"));

	sKey.Format(_T("%s%dST"), PIPE_INSTHICK, nPos);
	m_mapSpecXData.SetAt(sKey, _T("TRACKS"));
}

bool AecDbXWall::GetInsulation(int nPos, InsulData &data) const
{
	assertReadEnabled();
	//示例
	data.dThick = 100;//mm

	CString sKey;
	sKey.Format(_T("%s%d"), PIPE_INSTHICK,nPos);
	m_mapSpecXData.GetAt(sKey, data.dThick);

	_tcscpy(data.szInsSpec, _T("界面处理剂;粘接层;保温层;抗裂保护层;耐碱网格布;柔性腻子层;饰面层"));
	_tcscpy(data.szLnStyle, _T("TRACKS"));

	sKey.Format(_T("%s%dSP"), PIPE_INSTHICK, nPos);
	m_mapSpecXData.GetAt(sKey, data.szInsSpec);

	sKey.Format(_T("%s%dST"), PIPE_INSTHICK, nPos);
	m_mapSpecXData.GetAt(sKey, data.szLnStyle);

	return true;
}

void AecDbXWall::GetDraw2dables(AecComplexCurve& draw2d) const
{
	assertReadEnabled();
	m_drawable2d.GetEdage(draw2d);
	draw2d.OrthoProjectedToXYPlane();
}

bool AecDbXWall::GetInsulDraw2dables(AecComplexCurve &draw2dL, AecComplexCurve &draw2dR) const
{
	assertReadEnabled();

	InsulData dataL;
	memset(&dataL, 0, sizeof(InsulData));
	GetInsulation(0, dataL);

	InsulData dataR;
	memset(&dataR, 1, sizeof(InsulData));
	GetInsulation(1, dataR);

	AecComplexCurve cmplCrv;
	GetDraw2dables(cmplCrv);

	AecEqui::AecCurveElement elL = GetLeftElement();
	AecEqui::AecCurveElement elR = GetRightElement();

	AcDbCurve *pCurveL = NULL;
	AecComplexCurve::MakeCurve(elL, pCurveL);

	AcDbCurve *pCurveR = NULL;
	AecComplexCurve::MakeCurve(elR, pCurveR);

	AcDbLine lnBase;
	bool bIsLine = m_pBaseCurve->isKindOf(AcDbLine::desc());
	if (bIsLine)
	{
		AcGePoint3d ptS, ptE,ptS1,ptE1;
		if (pCurveL != NULL && pCurveR != NULL)
		{
			pCurveL->getStartPoint(ptS);
			pCurveL->getEndPoint(ptE);

			pCurveR->getStartPoint(ptS1);
			pCurveR->getEndPoint(ptE1);

			lnBase.setStartPoint(MidPoint(ptS, ptS1));
			lnBase.setEndPoint(MidPoint(ptE, ptE1));
		}
	}
	
	AcGeVector3d vtOff(0,0,0);
	AcGePoint3d ptOn;

	for (int i = 0;i < cmplCrv.length();i++)
	{
		AecEqui::AecCurveElement el = cmplCrv.at(i);

		//判断共线
		if (IsOnCurve(pCurveL, el) && !el.bHided)
		{
			if (bIsLine)//LINE
			{
				if (el.bHided)
				{
					continue;
				}
				//偏移
				lnBase.getClosestPointTo(el.ptGe[0], ptOn, Adesk::kTrue);

				vtOff = el.ptGe[0] - ptOn;
				vtOff.normalize();
				vtOff *= dataL.dThick;
				
				el.ptGe[0] += vtOff;
				el.ptGe[1] += vtOff;
				el.ptGe[2] += vtOff;
				draw2dL.append(el);
			}
			else//ARC
			{
				if (el.bHided)
				{
					continue;
				}
				AcDbArc* pArc = FormatArc(el.ptGe[0], el.ptGe[1], el.ptGe[2]);
				if (pArc != NULL)
				{
					for (int n = 0; n < 3; n++)
					{
						vtOff = pArc->center() - el.ptGe[n];
						vtOff.normalize();
						el.ptGe[n] += vtOff * dataL.dThick;
					}
					draw2dL.append(el);
					delete pArc;
				}
			}
			continue;
		}

		if (IsOnCurve(pCurveR, el) && !el.bHided)
		{
			//偏移
			if (bIsLine)//LINE
			{
				if (el.bHided)
				{
					continue;
				}
				lnBase.getClosestPointTo(el.ptGe[0], ptOn, Adesk::kTrue);

				vtOff = el.ptGe[0] - ptOn;
				vtOff.normalize();
				vtOff *= dataR.dThick;

				el.ptGe[0] += vtOff;
				el.ptGe[1] += vtOff;
				el.ptGe[2] += vtOff;

				draw2dR.append(el);	
			}
			else//ARC
			{
				if (el.bHided)
				{
					continue;
				}
				AcDbArc *pArc = FormatArc(el.ptGe[0], el.ptGe[1], el.ptGe[2]);
				if (pArc != NULL)
				{
					for (int n = 0; n < 3; n++)
					{
						vtOff = el.ptGe[n] - pArc->center();
						vtOff.normalize();
						el.ptGe[n] += vtOff * dataR.dThick;
					}
					draw2dR.append(el);
					delete pArc;
				}
			}
			continue;
		}
	}

	if (pCurveL != NULL) delete pCurveL;
	if (pCurveR != NULL) delete pCurveR;

	return (!draw2dR.isEmpty() && !draw2dL.isEmpty()) ? true : false;
}

void AecDbXWall::GetDraw2dHideTail(AecComplexCurve& draw2d) const
{
	assertReadEnabled();
	m_2dHideTail.GetEdage(draw2d);
	draw2d.OrthoProjectedToXYPlane();
}

void AecDbXWall::SetDraw2dHideTail(const AecComplexCurve& draw2d)
{
	AssertWriteEnabled();
	m_2dHideTail.SetEdage(draw2d);
}

Acad::ErrorStatus AecDbXWall::Draw2d(AcGiDraw &dc) const
{
	assertReadEnabled();
	if (g_BALock::instance().Draw() != BIT_SUCCESS)
		return Acad::eOk;

	//管线系统屏蔽掉
	if ( dc.IsDragging() )
	{
		//return Acad::eOk;
	}

	AcDbObjectId idCurLay = dc.GetLayerId();
	AcDbObjectId idCurLty = dc.GetLineTypeId();
	Adesk::UInt16 nCrBk = colorIndex();

	int nColor = nCrBk;
	if ( m_mapSpecXData.GetAt(_T("COLOR"),nColor) )
	{
		dc.SetColor(nColor);
	}

	DrawDTYG2D(dc);

	//二维缓存,未知出错!
	if (Has2DBuffer())
	{
		AcDbEntity* pEnt = NULL;
		const AcDbVoidPtrArray &ar2D = Get2DBuffer();
		for (int i = 0;i < ar2D.length();i++)
		{
			pEnt = (AcDbEntity*)ar2D.at(i);
			pEnt->setColorIndex(nColor);
			dc.DrawEntity(*pEnt);
		}
		dc.SetColor(nCrBk);
		dc.SetLayer(idCurLay);
		dc.SetLineType(idCurLty);
		return Acad::eOk;
	}

	if (!m_drawable2d.HasEdage())
	{
		int nShape = 0;
		if ( m_mapSpecXData.GetAt(KEY_SECSHAPE,nShape) )
		{
			if (nShape == eXShape)
			{
				return AecDbEwPipeBase::Draw2d(dc);
			}
		}

		//没有融合干涉前的标准绘制
		AecComplexCurveDraw draw2d;
		GetStandardDraw2d(draw2d);

		DrawBrokenOpen(draw2d);

		SubDrawPlotWidth(draw2d);
		draw2d.SetHideDraw(FALSE);
		draw2d.SetColor(nColor);
		draw2d.Draw2d(dc,layerId(),m_idDashLayer,m_idCenterLayer,NULL,TRUE);
		m_drawable2d = draw2d;

		AcDbVoidPtrArray arPtrs;
		draw2d.explode(arPtrs,layerId(),m_idDashLayer,m_idCenterLayer,NULL,TRUE);
		Add2DBuffer(arPtrs);
	}
	else//有
	{
		//m_drawable2d可能来自融合处理结果.
		//融合结果绘制
		AecComplexCurveDraw draw2d;
		draw2d.copyFrom(m_drawable2d);

		//在此减去带型窗，转角窗户的压墙线
		// 对于上述窗户命令中的如下代码，导致墙体的三维融合挖空过度
		//pWall->SubtractDraw2d(win2d);
		//所以二维在此临时裁剪，外部命令不裁剪
		//涉及命令 PL_ZJCH  PL_DXCH 2024 - 05 - 15
		SubtractXOpeningDraw2d(draw2d);

		SubDrawPlotWidth(draw2d);
		draw2d.SetHideDraw(FALSE);
		draw2d.SetColor(nColor);
		draw2d.Draw2d(dc,layerId(),m_idDashLayer,m_idCenterLayer,NULL,TRUE);

		DrawBrokenOpen(draw2d);

		//取端部线
		AecComplexCurveDraw draw2dTail;
		draw2dTail.copyFrom(m_2dHideTail);
		
		SubDrawPlotWidth(draw2dTail);
		draw2dTail.SetHideDraw(FALSE);
		draw2dTail.SetColor(nColor);
		draw2dTail.Draw2d(dc,layerId(),m_idDashLayer,m_idCenterLayer,NULL,TRUE);

		AcDbVoidPtrArray arPtrs;
		draw2d.explode(arPtrs,layerId(),m_idDashLayer,m_idCenterLayer,NULL,TRUE);
		draw2dTail.explode(arPtrs,layerId(),m_idDashLayer,m_idCenterLayer,NULL,TRUE);
		Add2DBuffer(arPtrs);
	}

	AcDbVoidPtrArray arCurves;
	GetInsideCurves(arCurves);

	AcDbEntity* pEnt = NULL;
	for (int i = 0;i < arCurves.length();i++)
	{
		pEnt = (AcDbEntity*)arCurves.at(i);
		if (pEnt != NULL)
		{
			pEnt->setLayer(idCurLay);
			pEnt->setColorIndex(nColor);
			dc.DrawEntity(pEnt);
			Add2DBuffer(pEnt);
		}
	}

	dc.SetColor(nCrBk);
	dc.SetLayer(idCurLay);
	dc.SetLineType(idCurLty);
	return Acad::eOk;
}

Acad::ErrorStatus  AecDbXWall::DrawBrokenOpen(AecComplexCurveDraw& draw2d) const
{
	AecComplexCurve cmpl;
	draw2d.GetEdage(cmpl);

	AecEqui::AecCurveElement el;
	memset(&el,0,sizeof(AecEqui::AecCurveElement));

	AcDbLine* pLine = AcDbLine::cast(m_pBaseCurve);
	if (pLine == NULL)
		return Acad::eOk;

	AcGeVector3d vtL = pLine->endPoint() - pLine->startPoint();
	vtL.normalize();
	AcGeVector3d vtV = vtL;
	vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

	AecComplexCurve cmpl2;
	double dThick = 0.0;
	m_mapSpecXData.GetAt(KEY_SIZE1,dThick);

	//绘制断墙体符号
	AcGePoint3d ptGeT,ptGeBK;
	AcGePoint3dArray arPoints;
	CString sIndex;
	for(int i = 0;i < PIPE_BROKENNUM;i++)
	{
		sIndex.Format(_T("BKOP%d"),i);
		if (m_mapSpecXData.GetAt(sIndex,ptGeBK))
		{
			m_pBaseCurve->getPointAtDist(ptGeBK.x,ptGeT);
			ptGeT.z = 0.0;//仅仅俯视
			arPoints.append(ptGeT);
			el.ptGe[0] = ptGeT;

			m_pBaseCurve->getPointAtDist(ptGeBK.x + ptGeBK.y,ptGeT);
			ptGeT.z = 0.0;//仅仅俯视
			arPoints.append(ptGeT);
			el.ptGe[1] = ptGeT;
			el.ptGe[2] = ptGeT;
			
			el.ptGe[0] += vtV * 0.5 * dThick;
			el.ptGe[1] += vtV * 0.5 * dThick;
			el.ptGe[2] += vtV * 0.5 * dThick;
			cmpl2.append(el);

			el.ptGe[0] -= vtV * dThick;
			el.ptGe[1] -= vtV * dThick;
			el.ptGe[2] -= vtV * dThick;
			cmpl2.append(el);
		}
	}

	if ( !cmpl2.isEmpty() )
	{
		AecCoverBooleanOper::BoolSubtract(cmpl,cmpl2);
		cmpl.OrthoProjectedToXYPlane();
		draw2d.SetEdage(cmpl);
		//符号在外部绘制
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::SubDrawPlotWidth(AecComplexCurveDraw& draw2d) const
{
	double dW = 0.0;
	AcGeVector3d vt;

	if ( m_mapSpecXData.GetAt(KEY_PLOTW,dW) )
	{
		AecComplexCurve& cmpl = draw2d.GetRefEdage();
		for (int i = 0;i < cmpl.length();i++)
		{
			AecEqui::AecCurveElement& el = cmpl.atByRef(i);
			el.dWidth = dW;

			//两头延伸半个宽度
			if (dW > 1.e-6)
			{
				if (el.ptGe[1].distanceTo(el.ptGe[2]) < 1.e-3)//是直线
				{
					vt = el.ptGe[2] - el.ptGe[0];
					vt.normalize();
					vt *= 0.5 * dW;

					el.ptGe[0] -= vt;
					el.ptGe[2] += vt;
					el.ptGe[1] = el.ptGe[2];
				}
				else
				{
					//待定...
				}
			}
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::Draw3d(AcGiDraw &dc) const
{
	assertReadEnabled();

	if (g_BALock::instance().Draw() != BIT_SUCCESS)
		return Acad::eOk;

	//管线系统屏蔽掉
	if ( dc.IsDragging() )
	{
		//return Acad::eOk;
	}

	//图层
 	AcDbObjectId idLay = dc.GetLayerId();
	dc.SetLayer(layerId());

	int nCrBk = dc.GetColor();

	int nColor = nCrBk;
	if ( m_mapSpecXData.GetAt(_T("COLOR"),nColor) )
	{
		dc.SetColor(nColor);
	}

	if (IsActive())
	{
		nColor = kMagenta;
		m_mapSpecXData.GetAt(KEY_ACTIVECR,nColor);
		dc.SetColor(nColor);
	}

	if (Has3DBuffer())
	{
		AcDbEntity* pEnt = NULL;
		const AcDbVoidPtrArray &ar3D = Get3DBuffer();
		for (int i = 0;i < ar3D.length();i++)
		{
			pEnt = (AcDbEntity*)ar3D.at(i);
			if ( IsActive() )
			{
				BackupColorIndex(pEnt);
				pEnt->setColorIndex(nColor);
			}
			else
			{
				SetBackupColorIndex(pEnt);
			}
			dc.DrawEntity(*pEnt);
		}

		dc.SetLayer(idLay);
		dc.SetColor(nCrBk);
		return Acad::eOk;
	}

	AcCmTransparency tr = transparency();
	AcDb3dSolid* pSolidDraw = GetDraw3dSolid(false);
	if (pSolidDraw != NULL)
	{
		pSolidDraw->setTransparency(tr);
		pSolidDraw->setLayer(layerId());
		pSolidDraw->setColorIndex(nColor);
		dc.DrawEntity(pSolidDraw);
		Add3DBuffer(pSolidDraw);
	}
	dc.SetLayer(idLay);
	dc.SetColor(nCrBk);

	return Acad::eOk;
}

bool AecDbXWall::GetInterface(AcArray<AecInterface>& arInfs) const
{
	assertReadEnabled();
	AcDbCurve* pCurve = GetBaseCurve();
	if (pCurve != NULL)
	{
		double dSta = 0.0,dEnd = 0.0;
		pCurve->getStartParam(dSta);
		pCurve->getEndParam(dEnd);

		AcGeVector3d vt0,vt1;
		pCurve->getFirstDeriv(dSta,vt0);
		pCurve->getFirstDeriv(dEnd,vt1);

		AcGePoint3d ptSta,ptEnd;
		pCurve->getStartPoint(ptSta);
		pCurve->getEndPoint(ptEnd);

		double dThick = 0.0;
		m_mapSpecXData.GetAt(KEY_SIZE1,dThick);

		AecInterface inf;
		inf.idOwner = objectId();
		inf.nType = -1;
		inf.dGasket = 0;
		inf.ptPos = ptSta;
		inf.dSize1 = dThick;
		inf.dSize2 = dThick;
		inf.vtDir = vt0;
		arInfs.append(inf);

		inf.ptPos = ptEnd;
		inf.dSize1 = dThick;
		inf.dSize2 = dThick;
		inf.vtDir = vt1;
		arInfs.append(inf);

		delete pCurve;
		return true;
	}
	return false;
}

bool AecDbXWall::GetInterface(int nIndex,AecInterface& inf) const
{
	assertReadEnabled();

	AcArray<AecInterface> arInfs;
	GetInterface(arInfs);

	if (nIndex > -1 && nIndex < arInfs.length())
	{
		inf = arInfs.at(nIndex);
		return true;
	}
	return false;
}

int	 AecDbXWall::GetInterfaceCount() const
{
	assertReadEnabled();

	AcArray<AecInterface> arInfs;
	GetInterface(arInfs);
	return arInfs.length();
}

int  AecDbXWall::GetActiveInf() const
{
	assertReadEnabled();
	return -1;
}

void AecDbXWall::SetActiveInf(int nIndex)
{

}

void AecDbXWall::LockInf(int nInf)
{

}

bool AecDbXWall::TransformAssocInf(int nInf,const AcGeMatrix3d& xform)
{
	AssertWriteEnabled();

	AcDbCurve* pBaseCrv = GetBaseCurve();
	if (pBaseCrv == NULL)
		return false;

	AcArray<AecInterface> arInf;
	GetInterface(arInf);

	if (nInf > -1 && nInf < arInf.length() )
	{
		AecInterface& inf = arInf.at(nInf);

		AcGePoint3d ptGe = inf.ptPos;
		ptGe.transformBy(xform);

		AcDbLine* pLine = AcDbLine::cast(pBaseCrv);
		if (pLine != NULL)//直墙
		{
			AcGePoint3d ptSta,ptEnd;
			ptSta = pLine->startPoint();
			ptEnd = pLine->endPoint();

			if (inf.ptPos.distanceTo(ptSta) < 1.e-1)
			{
				pLine->setStartPoint(ptGe);//新位置
				SetBaseCurve(pLine);

				delete pBaseCrv;
				return false;//不在继续发消息
			}

			if (inf.ptPos.distanceTo(ptEnd) < 1.e-1)
			{
				pLine->setEndPoint(ptGe);//新位置
				SetBaseCurve(pLine);

				delete pBaseCrv;
				return false;//不在继续发消息
			}
		}

		AcDbArc* pArc = AcDbArc::cast(pBaseCrv);//弧墙
		if (pArc != NULL)
		{
			AcGePoint3d ptSta,ptEnd,ptMid;
			pArc->getStartPoint(ptSta);
			pArc->getEndPoint(ptEnd);

			double dSta = 0.0,dEnd = 0.0;
			pArc->getStartParam(dSta);
			pArc->getEndParam(dEnd);
			double dMid = (dSta + dEnd) / 2.0;
			pArc->getPointAtParam(dMid,ptMid);

			if (inf.ptPos.distanceTo(ptSta) < 1.e-1)
			{
				AcDbArc* pArc2 = KTCADUtilityEx::FormatArc(ptGe,ptMid,ptEnd);
				if (pArc2 != NULL)
				{
					pArc->setStartAngle(pArc2->startAngle());
					pArc->setEndAngle(pArc2->endAngle());
					pArc->setCenter(pArc2->center());
					pArc->setRadius(pArc2->radius());

					SetBaseCurve(pArc2);
					
					delete pBaseCrv;
					delete pArc2;
				}
				return false;//不在继续发消息
			}

			if (inf.ptPos.distanceTo(ptEnd) < 1.e-1)
			{
				AcDbArc* pArc2 = KTCADUtilityEx::FormatArc(ptSta,ptMid,ptGe);
				if (pArc2 != NULL)
				{
					pArc->setStartAngle(pArc2->startAngle());
					pArc->setEndAngle(pArc2->endAngle());
					pArc->setCenter(pArc2->center());
					pArc->setRadius(pArc2->radius());

					SetBaseCurve(pArc2);

					delete pBaseCrv;
					delete pArc2;
				}
				return false;//不在继续发消息
			}
		}
	}

	delete pBaseCrv;
	return true;
}

Acad::ErrorStatus AecDbXWall::subGetGripPoints( AcDbGripDataPtrArray& grips,
											   const double curViewUnitSize,
											   const int gripSize,
											   const AcGeVector3d& curViewDir,
											   const int bitflags) const
{
	assertReadEnabled();

	AcGePoint3dArray gripPoints;
	ImpGetGripPoints(gripPoints,bitflags);

	int nColor = kWhite;
	AcDbGripData* pGripData = NULL;
	if ( bitflags >= 1394)//节点
	{
		memset(&m_pGripAppData[0],0,sizeof(AecGripData));
		m_pGripAppData[0].nIndex = 0;
		m_pGripAppData[0].ePos = eFlag;
		m_pGripAppData[0].nColor = nColor;
		m_pGripAppData[0].ptGrip = gripPoints.at(0);
		m_pGripAppData[0].pOwner = (AcDbEntity*)this;

		pGripData = new AcDbGripData;
		pGripData->setGripPoint(gripPoints.at(0));
		pGripData->setAppData((void*)&m_pGripAppData[0]);
		pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
		pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
		_tcscpy(m_pGripAppData[0].szTip,_T("点击定位造族<墙体>记录"));
		_tcscpy(m_pGripAppData[0].szID,m_sGUID);
		grips.append(pGripData);
		return Acad::eOk;
	}
	else
	{	
		EPosition ePos;
		CString sTip;
		for (int i = 0;i < gripPoints.length();i++)
		{
			ePos = ExplainGripIndex(i,sTip);
			memset(&m_pGripAppData[i],0,sizeof(AecGripData));
			m_pGripAppData[i].nIndex = i;
			m_pGripAppData[i].ePos = ePos;
			m_pGripAppData[i].nColor = kBlue;
			m_pGripAppData[i].ptGrip = gripPoints.at(i);
			_tcscpy(m_pGripAppData[i].szTip,sTip);
			_tcscpy(m_pGripAppData[i].szID,m_sGUID);
			m_pGripAppData[i].pOwner = (AcDbEntity*)this;

			pGripData = new AcDbGripData;
			pGripData->setGripPoint(gripPoints.at(i));
			pGripData->setAppData((void*)&m_pGripAppData[i]);
			pGripData->setWorldDraw(AecGripCback::WorldDrawfunc);
			pGripData->setToolTipFunc(AecGripCback::GripToolTipFunc);
			grips.append(pGripData);
		}
	}

	//调用基类加入单击修改
	SubAddHitEditGrip(grips);
	
	//动态标注
	//直线,半径 标注风格
	if (!grips.isEmpty())
	{
		SubAddDimPoints(grips,curViewDir);
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::SubAddDimPoints(AcDbGripDataPtrArray& grips,const AcGeVector3d& curViewDir) const
{
	if (GetDimGripOff())
		return Acad::eOk;

	if (IsVViewWall())
	{

	}
	else
	{
		WallData data;
		GetWallData(data);

		//中心线
		AcDbLine* pLn = AcDbLine::cast(m_pBaseCurve);
		if (pLn != NULL)
		{
			//长度
			AcGePoint3d ptSta = pLn->startPoint();
			AcGePoint3d ptEnd = pLn->endPoint();
			AcGeVector3d vtL = ptEnd - ptSta;
			vtL.normalize();
			AcGeVector3d vtV = vtL;
			vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

			AcGePoint3d ptMid;
			ptSta.z = data.dBomEl;
			ptEnd.z = data.dBomEl;

			ptSta -= vtV * 15.0;//外放一下
			ptEnd -= vtV * 15.0;//外放一下
			ptSta.z -= 10.0;//去掉10毫米,让出夹点
			ptEnd.z -= 10.0;//去掉10毫米,让出夹点
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid.z -= 10.0 * 100.0;//标注文字位置
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			//高度
			ptEnd = ptSta;
			ptEnd.z += data.dH;
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid -= vtL * 10.0 * 100.0;//标注文字位置
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			//厚度,[注:内部折算为中心对齐]
			ptSta += vtV * 10.0;//复位
			ptEnd += vtV * 10.0;//复位

			ptSta -= vtL * 10.0;//外放一下
			ptSta += vtV * 0.5 * data.dThick;
			ptEnd = ptSta;
			ptEnd -= vtV * data.dThick;
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid.z -= 5.0 * 100.0;//标注文字位置
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			//洞口标注
			ptSta = pLn->startPoint();
			AcGePoint3d ptOn;
			AcDbObjectId id;
			AcDbEntity* pEnt = NULL;
			Acad::ErrorStatus es;
			CString sName;
			if (objectId().isValid())
			{
				AcDbObjectIdArray arDim;//补正协同误加的重复
				for (int ii = 0;ii < m_arAssocPartEntIds.length();ii++)
				{
					id = m_arAssocPartEntIds.at(ii);
					if (arDim.find(id) != -1)
						continue;
					arDim.append(id);
					if ( Acad::eOk == (es = acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead)))
					{
						AecDbX3dPartEntity* pPart = AecDbX3dPartEntity::cast(pEnt);
						if (pPart != NULL)
						{
							sName = pPart->GetName();
							if (sName.CompareNoCase(_T("开洞")) == 0 ||
								sName.CompareNoCase(_T("套管")) == 0)
							{
								ptEnd = pPart->GetOrgPoint(true);
								pLn->getClosestPointTo(ptEnd,ptOn,Adesk::kTrue);
								ptOn.z = ptEnd.z;
								ptSta.z = ptEnd.z;

								ptMid = MidPoint(ptSta,ptEnd);
								ptMid.z -= ii * 5.0 * 100.0;//标注文字位置

								//洞位置
								AddDimPoints(grips,curViewDir,ptSta,ptOn,ptMid,0);

								//洞口尺寸参见洞口对象
							}
						}

						AecDbXOpening *pOpen = AecDbXOpening::cast(pEnt);
						if (pOpen != NULL)
						{
							OpeningData opData;
							memset(&opData, 0, sizeof(OpeningData));
							pOpen->GetOpeningData(opData);

							ptEnd = opData.ptPos;
							pLn->getClosestPointTo(ptEnd, ptOn, Adesk::kTrue);
							ptOn.z = ptEnd.z;
							ptSta.z = ptEnd.z;

							ptMid = MidPoint(ptSta, ptEnd);
							ptMid.z -= ii * 5.0 * 100.0;//标注文字位置

							//洞位置
							AddDimPoints(grips, curViewDir, ptSta, ptOn, ptMid, 0);

							//门窗尺寸参见洞口对象
						}
						pEnt->close();
					}
				}
			}
		}

		AcDbArc* pArc = AcDbArc::cast(m_pBaseCurve);
		if (pArc != NULL)
		{
			AcGePoint3d ptSta;
			pArc->getStartPoint(ptSta);

			AcGeVector3d vtL;
			pArc->getFirstDeriv(ptSta,vtL);
			vtL.normalize();
			vtL.negate();

			//半径标注
			ptSta.z = data.dBomEl;
			AcGePoint3d ptEnd = pArc->center();
			ptEnd.z = data.dBomEl;
			AcGePoint3d ptAMid = GetArcMidPoint(pArc);
			ptAMid.z = data.dBomEl;
			AcGePoint3d ptMid = MidPoint(ptAMid,ptEnd);
			AddDimPoints(grips,curViewDir,ptAMid,ptEnd,ptMid,1,pArc->radius());

			//高度
			ptEnd = ptSta;
			ptEnd.z += data.dH;
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid -= vtL * 10.0 * 100.0;//标注文字位置
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			//厚度,[注:内部折算为中心对齐]
			pArc->getStartPoint(ptSta);
			ptEnd = pArc->center();

			AcGeVector3d vtV = ptSta - ptEnd;
			vtV.normalize();
			ptSta += vtV * 0.5 * data.dThick;
			ptEnd = ptSta;
			ptEnd -= vtV * data.dThick;
			ptMid = MidPoint(ptSta,ptEnd);
			ptSta.z = ptEnd.z = data.dBomEl;
			ptMid.z -= 5.0 * 100.0;//标注文字位置
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			//角度
			pArc->getStartPoint(ptSta);
			pArc->getEndPoint(ptEnd);
			ptMid = GetArcMidPoint(pArc);
			ptMid.z -= 10.0 * 100.0;//标注文字位置
			double dSt = pArc->startAngle();
			double dEt = pArc->endAngle();
			if (dEt < dSt)
				dEt += 2.0 * PI;

			double dAngle = dEt - dSt;
			dAngle *= 180.0 / PI;
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,3,dAngle);
		}

		AcDbCircle* pCir = AcDbCircle::cast(m_pBaseCurve);
		if (pCir != NULL)
		{
			AcGePoint3d ptSta;
			pCir->getStartPoint(ptSta);

			AcGeVector3d vtL;
			pCir->getFirstDeriv(ptSta,vtL);
			vtL.normalize();
			vtL.negate();

			//半径标注
			ptSta.z = data.dBomEl;
			AcGePoint3d ptEnd = pCir->center();
			ptEnd.z = data.dBomEl;
			AcGePoint3d ptMid = MidPoint(ptSta,ptEnd);
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,1,pCir->radius());

			//高度
			ptEnd = ptSta;
			ptEnd.z += data.dH;
			ptMid = MidPoint(ptSta,ptEnd);
			ptMid -= vtL * 10.0 * 100.0;//标注文字位置
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);

			//厚度,[注:内部折算为中心对齐]
			pCir->getStartPoint(ptSta);
			ptEnd = pCir->center();

			AcGeVector3d vtV = ptSta - ptEnd;
			vtV.normalize();
			ptSta += vtV * 0.5 * data.dThick;
			ptEnd = ptSta;
			ptEnd -= vtV * data.dThick;
			ptMid = MidPoint(ptSta,ptEnd);
			ptSta.z = ptEnd.z = data.dBomEl;
			ptMid.z -= 5.0 * 100.0;//标注文字位置
			AddDimPoints(grips,curViewDir,ptSta,ptEnd,ptMid,0);
		}

		//加入洞口尺寸示意
		AddHoleDimPoints(grips,curViewDir);
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpGetGripPoints(AcGePoint3dArray& gripPoints,const int bitflags) const
{
	assertReadEnabled();

	//上下左右前后 夹点
	AcDbCurve* pBaseCrv = m_pBaseCurve;
	if (pBaseCrv != NULL)
	{
		WallData data;
		GetWallData(data);

		if (data.nSecShape == eRect)
		{
			return ImpGetRectWallGripPoints(gripPoints,data);
		}
		else if(data.nSecShape == eWw)
		{
			return ImpGetWwWallGripPoints(gripPoints,data);
		}
		else if (data.nSecShape == eUserDef)
		{
			return ImpGetUserDefWallGripPoints(gripPoints,data);
		}
		else if (data.nSecShape == eXShape)
		{
			return ImpGetXShapeSectionWallGripPoints(gripPoints,data);
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpGetRectWallGripPoints(AcGePoint3dArray& gripPoints,const WallData& data) const
{
	AcDbCurve* pBaseCrv = m_pBaseCurve;
	if (pBaseCrv == NULL)
	{
		return Acad::eOk;
	}

	int nAlign = 0;
	m_mapSpecXData.GetAt(KEY_ALIGN,nAlign);
	EAlign kAlign = (EAlign)nAlign;

	AcGePoint3d ptGe[3],ptTmp;
	pBaseCrv->getStartPoint(ptGe[0]);
	pBaseCrv->getEndPoint(ptGe[2]);

	double dSta = 0.0,dEnd = 0.0,dH = 0.0,dW = 0.0;
	pBaseCrv->getStartParam(dSta);
	pBaseCrv->getEndParam(dEnd);
	pBaseCrv->getPointAtParam((dSta+dEnd) / 2.0,ptGe[1]);

	double dCmd = PixelToWcs(10);
	AcGeVector3d vtL;

	AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
	if (pLn != NULL)
	{
		vtL = pLn->endPoint() - pLn->startPoint();
		vtL.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
		vtL.normalize();
	}

	//2.弧线墙体
	AcDbArc* pArc = AcDbArc::cast(pBaseCrv);
	if (pArc != NULL)
	{
		vtL = ptGe[1] - pArc->center();
		vtL.normalize();
	}

	if (pArc != NULL || pLn != NULL)
	{
		//下中 3个点 曲线
		for (int i = 0;i < 3;i++)
		{
			ptGe[i].z = data.dBomEl;
			gripPoints.append(ptGe[i]);
		}

		//中下 1个点 改标高
		ptTmp = ptGe[1];
		ptTmp.z -= dCmd;
		gripPoints.append(ptTmp);

		//下前 中点
		ptGe[1] += vtL * 0.5 * data.dThick;
		gripPoints.append(ptGe[1]);

		//下后 中点
		ptGe[1] -= vtL * data.dThick;
		gripPoints.append(ptGe[1]);

		//上 1个点
		//3D视图下
		if (!Is2DView())
		{
			ptGe[1] += vtL * 0.5 * data.dThick;
			ptGe[1].z += data.dH;
			gripPoints.append(ptGe[1]);
		}
		return Acad::eOk;
	}
	
	//3.圆墙体
	AcDbCircle* pCir = AcDbCircle::cast(pBaseCrv);
	if (pCir != NULL)
	{
		//下中 3个点 ->0度处 改半径和改内外宽
		vtL = AcGeVector3d::kXAxis;

		switch(kAlign)
		{
		case kLeft:
			{
				ptGe[1] = pCir->center() + ( pCir->radius() + 0.5 * data.dThick) * vtL;
				ptGe[0] = pCir->center() + ( pCir->radius() ) * vtL;
				ptGe[2] = pCir->center() + ( pCir->radius() + data.dThick) * vtL;

				break;
			}
		case kMid:
			{
				ptGe[0] = pCir->center() + ( pCir->radius() - 0.5 * data.dThick) * vtL;
				ptGe[1] = pCir->center() + ( pCir->radius() ) * vtL;
				ptGe[2] = pCir->center() + ( pCir->radius() + 0.5 * data.dThick) * vtL;
				break;
			}
		case kRight:
			{
				ptGe[1] = pCir->center() + ( pCir->radius() - 0.5 * data.dThick) * vtL;
				ptGe[0] = pCir->center() + ( pCir->radius() ) * vtL;
				ptGe[2] = pCir->center() + ( pCir->radius() - data.dThick) * vtL;

				break;
			}
		default:
			break;
		}

		for (int i = 0;i < 3;i++)
		{
			ptGe[i].z = data.dBomEl;
			gripPoints.append(ptGe[i]);
		}

		//下中 1个点 ->位移点
		ptTmp = pCir->center();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		//中下 1个点 ->拉底
		ptTmp.z -= dCmd;
		gripPoints.append(ptTmp);

		//顶部中 ->拉高
		ptTmp = pCir->center();
		ptTmp.z = data.dBomEl;
		ptTmp.z += data.dH;
		gripPoints.append(ptTmp);
	}

	AcDbEllipse* pEllip = AcDbEllipse::cast(pBaseCrv);
	if (pEllip != NULL)
	{
		//下中 3个点 ->0度处 改半径和改内外宽
		vtL = AcGeVector3d::kXAxis;

		switch(kAlign)
		{
		case kLeft:
			{
				ptGe[0] = pEllip->center() + ( pEllip->majorAxis().length() + 0.5 * data.dThick) * vtL;
				ptGe[1] = pEllip->center() + ( pEllip->majorAxis().length() ) * vtL;
				ptGe[2] = pEllip->center() + ( pEllip->majorAxis().length() + data.dThick) * vtL;
				break;
			}
		case kMid:
			{
				ptGe[0] = pEllip->center() + ( pEllip->majorAxis().length() - 0.5 * data.dThick) * vtL;
				ptGe[1] = pEllip->center() + ( pEllip->majorAxis().length() ) * vtL;
				ptGe[2] = pEllip->center() + ( pEllip->majorAxis().length() + 0.5 * data.dThick) * vtL;
				break;
			}
		case kRight:
			{
				ptGe[0] = pEllip->center() + ( pEllip->majorAxis().length() - 0.5 * data.dThick) * vtL;
				ptGe[1] = pEllip->center() + ( pEllip->majorAxis().length() ) * vtL;
				ptGe[2] = pEllip->center() + ( pEllip->majorAxis().length() - data.dThick) * vtL;

				break;
			}
		default:
			break;
		}

		for (int i = 0;i < 3;i++)
		{
			ptGe[i].z = data.dBomEl;
			gripPoints.append(ptGe[i]);
		}

		//下中 1个点 ->位移点
		ptTmp = pEllip->center();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		//中下 1个点 ->拉底
		ptTmp.z -= dCmd;
		gripPoints.append(ptTmp);

		//顶部中 ->拉高
		ptTmp = pEllip->center();
		ptTmp.z = data.dBomEl;
		ptTmp.z += data.dH;
		gripPoints.append(ptTmp);
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpGetWwWallGripPoints(AcGePoint3dArray& gripPoints,const WallData& data) const
{
	assertReadEnabled();
	
	AcDbCurve* pBaseCrv = m_pBaseCurve;
	AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
	AcDbArc* pArc = AcDbArc::cast(pBaseCrv);

	AcGePoint3d ptGe[3],ptTmp,ptGe1;
	double dCmd = PixelToWcs(10);
	AcGeVector3d vtL;

	if (pLn != NULL || pArc != NULL)
	{
		pBaseCrv->getStartPoint(ptGe[0]);
		pBaseCrv->getEndPoint(ptGe[2]);

		double dSta = 0.0,dEnd = 0.0,dH = 0.0,dW = 0.0;
		pBaseCrv->getStartParam(dSta);
		pBaseCrv->getEndParam(dEnd);
		pBaseCrv->getPointAtParam((dSta+dEnd) / 2.0,ptGe[1]);
		ptGe1 = ptGe[1];

		AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
		if (pLn != NULL)
		{
			vtL = pLn->endPoint() - pLn->startPoint();
			vtL.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			vtL.normalize();
		}

		//2.弧线墙体
		AcDbArc* pArc = AcDbArc::cast(pBaseCrv);
		if (pArc != NULL)
		{
			vtL = ptGe[1] - pArc->center();
			vtL.normalize();
		}

		//下中 3个点
		for (int i = 0;i < 3;i++)
		{
			ptGe[i].z = data.dBomEl;
			gripPoints.append(ptGe[i]);
		}

		//中下 1个点
		ptTmp = ptGe[1];
		ptTmp.z -= dCmd;
		gripPoints.append(ptTmp);

		//下前 中点
		ptGe[1] += vtL * 0.5 * data.dThick2;
		gripPoints.append(ptGe[1]);

		//下后 中点
		ptGe[1] -= vtL * data.dThick2;
		gripPoints.append(ptGe[1]);

		//上 1个点
		//3D视图下
		//if (!Is2DView())
		{
			//上三个点-> 中,宽,宽
			ptGe[1] = ptGe1;
			ptGe[1].z = data.dBomEl;
			ptGe[1].z += data.dH;
			gripPoints.append(ptGe[1]);

			ptGe[1] += vtL * 0.5 * data.dThick;
			gripPoints.append(ptGe[1]);
			
			ptGe[1] -= vtL * data.dThick;
			gripPoints.append(ptGe[1]);
		}
		return Acad::eOk;
	}

	AcDbCircle* pCir = AcDbCircle::cast(pBaseCrv);
	if (pCir != NULL)
	{
		//下中 3个点 ->0度处 改半径和改内外宽
		vtL = AcGeVector3d::kXAxis;

		ptTmp = pCir->center();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		ptTmp = pCir->center() + pCir->radius() * vtL;
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		//中下 1个点 ->改标高
		ptTmp.z -= dCmd;
		gripPoints.append(ptTmp);
		return Acad::eOk;
	}

	AcDbEllipse* pEllip = AcDbEllipse::cast(pBaseCrv);
	if (pEllip != NULL)
	{
		//下中 3个点 ->0度处 改半径和改内外宽
		vtL = AcGeVector3d::kXAxis;

		ptTmp = pEllip->center();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		ptTmp = pEllip->center() + pEllip->majorAxis();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		//中下 1个点 ->改标高
		ptTmp.z -= dCmd;
		gripPoints.append(ptTmp);
		return Acad::eOk;
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpGetUserDefWallGripPoints(AcGePoint3dArray& gripPoints,const WallData& data) const
{
	AcDbCurve* pBaseCrv = m_pBaseCurve;
	AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
	AcDbArc* pArc = AcDbArc::cast(pBaseCrv);

	AcGePoint3d ptGe[3],ptTmp,ptGe1;
	double dCmd = PixelToWcs(10);
	AcGeVector3d vtL;

	if (pLn != NULL || pArc != NULL)
	{
		pBaseCrv->getStartPoint(ptGe[0]);
		pBaseCrv->getEndPoint(ptGe[2]);

		double dSta = 0.0,dEnd = 0.0,dH = 0.0,dW = 0.0;
		pBaseCrv->getStartParam(dSta);
		pBaseCrv->getEndParam(dEnd);
		pBaseCrv->getPointAtParam((dSta+dEnd) / 2.0,ptGe[1]);
		ptGe1 = ptGe[1];

		//下中 3个点
		for (int i = 0;i < 3;i++)
		{
			ptGe[i].z = data.dBomEl;
			gripPoints.append(ptGe[i]);
		}
		return Acad::eOk;
	}

	AcDbCircle* pCir = AcDbCircle::cast(pBaseCrv);
	if (pCir != NULL)
	{
		//下中 3个点 ->0度处 改圆心,半径,标高
		vtL = AcGeVector3d::kXAxis;

		ptTmp = pCir->center();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		ptTmp = pCir->center() + pCir->radius() * vtL;
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		return Acad::eOk;
	}

	AcDbEllipse* pEllip = AcDbEllipse::cast(pBaseCrv);
	if (pEllip != NULL)
	{
		//下中 3个点 ->0度处 改圆心,半径,标高
		vtL = AcGeVector3d::kXAxis;

		ptTmp = pEllip->center();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		ptTmp = pEllip->center() + pEllip->majorAxis();
		ptTmp.z = data.dBomEl;
		gripPoints.append(ptTmp);

		return Acad::eOk;
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpGetXShapeSectionWallGripPoints(AcGePoint3dArray& gripPoints,const WallData& data) const
{
	AcDbLine* pLn = AcDbLine::cast(m_pBaseCurve);

	AcGePoint3d ptGe[3],ptTmp,ptGe1;
	double dCmd = PixelToWcs(10);
	AcGeVector3d vtL;

	if (pLn != NULL)
	{
		ptGe[0] = pLn->startPoint();
		ptGe[2] = pLn->endPoint();
		ptGe[1] = MidPoint(ptGe[0],ptGe[2]);

		//下中 3个点
		for (int i = 0;i < 3;i++)
		{
			gripPoints.append(ptGe[i]);
		}
	}
	return Acad::eOk;
}

EPosition AecDbXWall::ExplainGripIndex(int nIndex,CString& sTip) const
{
	assertReadEnabled();

	WallData data;
	GetWallData(data);

	AcDbLine* pLn = AcDbLine::cast(m_pBaseCurve);
	AcDbArc* pArc = AcDbArc::cast(m_pBaseCurve);
	AcDbCircle* pCir = AcDbCircle::cast(m_pBaseCurve);
	AcDbEllipse* pEllip = AcDbEllipse::cast(m_pBaseCurve);

	EPosition ePos = eAdjust0;
	if (data.nSecShape == eRect)
	{
		if (pLn != NULL || pArc != NULL)
		{
			switch(nIndex)//最多 11 个点
			{
			case 0://下中线sta ->改起点
				{
					ePos = eStart;
					sTip = _T("墙线的起点拉伸点");
					break;
				}
			case 1://下中线mid ->位置移动
				{
					ePos = eMid;
					sTip = _T("墙线的位置修改夹点");
					break;
				}
			case 2://下中线End ->改终点
				{
					ePos = eEnd;
					sTip = _T("墙线的终点拉伸点");
					break;
				}
			case 3://下中线中下 ->改标高
				{
					ePos = eAdjust0;
					sTip = _T("墙线的标高修改夹点");
					break;
				}
			case 4://前线mid ->改宽,不改长
				{
					ePos = eAdjust0;
					sTip = _T("墙线的宽度修改夹点");
					break;
				}
			case 5://后线mid ->改宽,不改长
				{
					ePos = eAdjust0;
					sTip = _T("墙线的宽度修改夹点");
					break;
				}
			case 6://上线mid ->改高度
				{
					ePos = eAdjust0;
					sTip = _T("墙线的高度修改夹点");
					break;
				}
			default:
				break;
			}
			return ePos;
		}

		if (pCir != NULL || pEllip != NULL)
		{
			switch(nIndex)//最多 11 个点
			{
			case 0://内半径sta ->改内宽
				{
					ePos = eStart;
					sTip = _T("墙线的改内宽拉伸点");
					break;
				}
			case 1://半径 ->改半径
				{
					ePos = eMid;
					sTip = _T("墙线的改半径夹点");
					break;
				}
			case 2://外半径 ->改外宽
				{
					ePos = eEnd;
					sTip = _T("墙线的改外宽拉伸点");
					break;
				}
			case 3://圆心
				{
					ePos = eAdjust0;
					sTip = _T("墙线的移动夹点");
					break;
				}
			case 4://圆心下 ->改标高和高
				{
					ePos = eAdjust0;
					sTip = _T("墙线的标高修改夹点");
					break;
				}
			case 5://圆心上 ->改高度
				{
					ePos = eAdjust0;
					sTip = _T("墙线的高度修改夹点");
					break;
				}
			default:
				break;
			}
			return ePos;
		}
	}
	else if (data.nSecShape == eWw)
	{
		if (pLn != NULL || pArc != NULL)
		{
			switch(nIndex)
			{
			case 0://下中线sta ->改起点
				{
					ePos = eStart;
					sTip = _T("墙线的起点拉伸点");
					break;
				}
			case 1://下中线mid ->位置移动
				{
					ePos = eMid;
					sTip = _T("墙线的位置修改夹点");
					break;
				}
			case 2://下中线End ->改终点
				{
					ePos = eEnd;
					sTip = _T("墙线的终点拉伸点");
					break;
				}
			case 3://下中线中下 ->改标高
				{
					ePos = eAdjust0;
					sTip = _T("墙线的标高修改夹点");
					break;
				}
			case 4://前线mid ->改宽,不改长
				{
					ePos = eAdjust0;
					sTip = _T("墙线的宽度修改夹点");
					break;
				}
			case 5://后线mid ->改宽,不改长
				{
					ePos = eAdjust0;
					sTip = _T("墙线的宽度修改夹点");
					break;
				}
			case 6://上中
				{
					ePos = eMid;
					sTip = _T("墙线的位置修改夹点");
					break;
				}
			case 7://上左宽
				{
					ePos = eAdjust0;
					sTip = _T("墙线的宽度修改夹点");
					break;
				}
			case 8://上右宽
				{
					ePos = eAdjust0;
					sTip = _T("墙线的宽度修改夹点");
					break;
				}
			default:
				break;
			}
			return ePos;
		}

		if (pCir != NULL || pEllip != NULL)
		{
			switch(nIndex)
			{
			case 0:
				{
					ePos = eStart;
					sTip = _T("墙线的位置修改夹点");
					break;
				}
			case 1:
				{
					ePos = eMid;
					sTip = _T("圆墙线的半径修改夹点");
					break;
				}
			case 2:
				{
					ePos = eAdjust0;
					sTip = _T("圆墙线的标高修改夹点");
					break;
				}
			default:
				break;
			}
			return ePos;
		}
	}
	else if (data.nSecShape == eUserDef)
	{
		if (pLn != NULL || pArc != NULL)
		{
			switch(nIndex)
			{
			case 0://下中线sta ->改起点
				{
					ePos = eStart;
					sTip = _T("墙线的起点拉伸点");
					break;
				}
			case 1://下中线mid ->位置移动
				{
					ePos = eMid;
					sTip = _T("墙线的位置修改夹点");
					break;
				}
			case 2://下中线End ->改终点
				{
					ePos = eEnd;
					sTip = _T("墙线的终点拉伸点");
					break;
				}
			case 3://下中线中下 ->改标高
				{
					ePos = eAdjust0;
					sTip = _T("墙线的标高修改夹点");
					break;
				}
			default:
				break;
			}
			return ePos;
		}

		if (pCir != NULL || pEllip != NULL)
		{
			switch(nIndex)
			{
			case 0://改圆心
				{
					ePos = eStart;
					sTip = _T("圆墙线的圆心修改夹点");
					break;
				}
			case 1://半径
				{
					ePos = eMid;
					sTip = _T("圆墙线的半径修改夹点");
					break;
				}
			case 2://标高
				{
					ePos = eEnd;
					sTip = _T("圆墙线的标高拉伸点");
					break;
				}
			default:
				break;
			}
			return ePos;
		}
	}
	return ePos;
}

LPCTSTR	AecDbXWall::GetGripCmd() const
{
	assertReadEnabled();

	CString sCmd = _T("EW_HZQT");
	m_mapSpecXData.GetAt(_T("GRIPCMD"),sCmd);//可能重定义

	return sCmd;
}

Acad::ErrorStatus AecDbXWall::subMoveGripPointsAt(const AcDbVoidPtrArray& gripAppData, const AcGeVector3d& offset, const int bitflags)
{
	AssertWriteEnabled();
	ClearForDraw2dables();

	WallData data;
	GetWallData(data);
	Acad::ErrorStatus es;

	PreRefreshOpeningDraw();

	if (HitOnGripEdit(gripAppData))
	{
		return Acad::eOk;
	}

	if (data.nSecShape == eRect)
	{
		es = ImpMoveRectWallGripPointsAt(gripAppData,offset);
	}
	else if(data.nSecShape == eWw)
	{
		es = ImpMoveWwWallGripPointsAt(gripAppData,offset);
	}
	else if (data.nSecShape == eUserDef)
	{
		es = ImpMoveUserDefWallGripPointsAt(gripAppData,offset);
	}
	else if (data.nSecShape == eXShape)
	{
		es = ImpMoveXShapeSectionWallGripPointsAt(gripAppData,offset);
	}

	RefreshOpeningDraw();

	return es;
}

Acad::ErrorStatus AecDbXWall::PreRefreshOpeningDraw()
{
	if (objectId().isValid())
	{
		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < m_arAssocPartEntIds.length();i++)
		{
			if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,m_arAssocPartEntIds.at(i),AcDb::kForRead))
			{
				AecDbXOpening* pOpen = AecDbXOpening::cast(pEnt);
				if (pOpen != NULL)
				{
					AecComplexCurve win2d;
					pOpen->GetStandardDraw2d(win2d,false);
					BoolUniteDraw2d(win2d);
				}
				pEnt->close();
			}
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::RefreshOpeningDraw()
{
	if (objectId().isValid())
	{
		GripMessage msg;
		memset(&msg,0,sizeof(GripMessage));
		msg.nType = 3;
		msg.idHost = objectId();

		msg.nData = 0;
		msg.pParam = NULL;
		msg.fData = 0.0;
		msg.ptGrip.set(0,0,0);

		PushGripMessage(msg);

		acedPostCommand(_T("\x03"));
		acedPostCommand(_T("PL_QMSX\n"));
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpMoveRectWallGripPointsAt(const AcDbVoidPtrArray& gripAppData, const AcGeVector3d& offset)
{
	AecGripData* pAppData = NULL;
	AcDbIntArray arIndex;

	if ( gripAppData.isEmpty() )
	{
		return Acad::eOk;
	}

	pAppData = (AecGripData*)gripAppData.first();
	arIndex.append(pAppData->nIndex);

	AcGeVector3d vtOffset = offset;
	if (offset.isZeroLength())
		return Acad::eOk;

	AcGeVector3d vtXYOffset;
	vtXYOffset = vtOffset.orthoProject(AcGeVector3d::kZAxis);

	AcGeVector3d vtZOffset;
	vtZOffset = vtOffset.orthoProject(AcGeVector3d::kXAxis);

	AcGeVector3d vtWidth,vtL,vtW,vtH;

	int nGripIndex = arIndex.first();

	AcGeMatrix3d xformM;
	xformM.setToTranslation(vtOffset);

	WallData data;
	GetWallData(data);

	AcGePoint3d ptTmp,ptTmp2;
	AcGeMatrix3d xform;
	double dThick = 0.0,dHAdd = 0.0;
	double dLen = offset.length();

	AcDbCurve* pBaseCrv = m_pBaseCurve;
	if (pBaseCrv != NULL)
	{
		//1.直线墙
		AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
		if (pLn != NULL)
		{
			vtL = pLn->endPoint() - pLn->startPoint();
			vtW = vtL;
			vtW.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0://下中线sta ->改起点
				{
					AcGeVector3d vt(offset);
					vt.z = GetElevation(0);
					dLen = vt.length();
					ptTmp = pLn->startPoint();
					vtXYOffset.normalize();
					vtXYOffset *= dLen;
					ptTmp += vtXYOffset;
					pLn->setStartPoint(ptTmp);
					break;
				}
			case 1://下中线mid ->位置移动
				{
					xform.setToTranslation(vtOffset);
					pLn->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);
					break;
				}
			case 2://下中线End ->改终点
				{
					AcGeVector3d vt(offset);
					vt.z = GetElevation(0);
					dLen = vt.length();
					ptTmp = pLn->endPoint();
					vtXYOffset.normalize();
					vtXYOffset *= dLen;
					ptTmp += vtXYOffset;
					pLn->setEndPoint(ptTmp);
					break;
				}
			case 3://下中线中下 ->改标高
				{
					ptTmp = pLn->startPoint();
					//ptTmp += vtOffset;
					vtZOffset.normalize();
					vtZOffset *= dLen;
					ptTmp += vtZOffset;

					dHAdd = pLn->startPoint().z - ptTmp.z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						if ( (data.dH + dHAdd)>1.e-3)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl - dHAdd);
						}
					}
					break;
				}
			case 4://前线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					ptTmp = pLn->startPoint();
					ptTmp2 = ptTmp + vtWidth;

					int nDir = 1;
					dThick = dLen;//vtWidth.length();//增加的宽度
					if (!vtW.isCodirectionalTo(vtWidth))
					{
						dThick *= -1.0;
						//vtWidth.negate();
						nDir = -1;
					}

					if ( (data.dThick + dThick ) > 1.e-3)
					{
						//中线移动一半
						vtWidth.normalize();
						vtWidth *= dLen;
						xform.setToTranslation(0.5 * vtWidth);
						pLn->transformBy(xform);	
						
						AcGePoint3d ptS = pLn->startPoint();
						AcGePoint3d ptE = pLn->endPoint();

						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);

							//洞口改宽
							vtWidth.normalize();
							vtWidth *= dThick;
							vtWidth *= nDir;
							HoleAndPipeExtend(dThick,0.5 * vtWidth);
						}
						else
						{
							//...
						}
					}
					break;
				}
			case 5://后线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					ptTmp = pLn->startPoint();
					ptTmp2 = ptTmp + vtWidth;

					int nDir = 1;
					dThick = dLen;//vtWidth.length();//增加的宽度
					if (vtW.isCodirectionalTo(vtWidth))
					{
						dThick *= -1.0;
						//vtWidth.negate();
						nDir = -1;
					}

					if ( (data.dThick + dThick) > 1.e-3)
					{
						//中线移动一半
						vtWidth.normalize();
						vtWidth *= dLen;
						xform.setToTranslation(0.5 * vtWidth);
						pLn->transformBy(xform);

						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);

							//洞口改宽
							vtWidth.normalize();
							vtWidth *= dThick;
							vtWidth *= nDir;
							HoleAndPipeExtend(dThick,0.5 * vtWidth);
						}
						else
						{
							//..
						}
					}
					break;
				}
			case 6://上线mid ->改高度
				{
					ptTmp = pLn->startPoint();
					//ptTmp += vtOffset;
					vtZOffset.normalize();
					vtZOffset *= dLen;
					ptTmp += vtZOffset;

					dHAdd = ptTmp.z - pLn->startPoint().z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						if ( (data.dH + dHAdd) > 1.e-3)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl);
						}
					}

					break;
				}
			default:
				break;
			}
		}

		//2.弧线墙体
		AcDbArc* pArc = AcDbArc::cast(pBaseCrv);
		if (pArc != NULL)
		{
			AcGePoint3d ptGe[3];
			double dSta = 0.0,dEnd = 0.0,dR = 0.0;
			pArc->getStartParam(dSta);
			pArc->getEndParam(dEnd);
			pArc->getPointAtParam((dSta+dEnd) / 2.0,ptGe[1]);

			vtW = ptGe[1] - pArc->center();
			vtW.normalize();

			vtL = vtW;
			vtL.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			dR = pArc->radius();

			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0://下中线sta ->改起点
				{
					pArc->getStartPoint(ptTmp);

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;
					pArc->getEndPoint(ptTmp2);

					AcDbArc* pArcNew = FormatArc(ptTmp,ptGe[1],ptTmp2);
					if (pArcNew != NULL)
					{
						pArc->setStartAngle(pArcNew->startAngle());
						pArc->setEndAngle(pArcNew->endAngle());
						pArc->setCenter(pArcNew->center());
						pArc->setRadius(pArcNew->radius());
						delete pArcNew;
					}
					break;
				}
			case 1://下中线mid ->位置移动
				{
					//xform.setToTranslation(vtXYOffset);
					xform.setToTranslation(vtOffset);
					pArc->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);
					break;
				}
			case 2://下中线End ->改终点
				{
					pArc->getEndPoint(ptTmp);
					pArc->getStartPoint(ptTmp2);

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;

					AcDbArc* pArcNew = FormatArc(ptTmp2,ptGe[1],ptTmp);
					if (pArcNew != NULL)
					{
						pArc->setStartAngle(pArcNew->startAngle());
						pArc->setEndAngle(pArcNew->endAngle());
						pArc->setCenter(pArcNew->center());
						pArc->setRadius(pArcNew->radius());
						delete pArcNew;
					}
					break;
				}
			case 3://下中线中下 ->改标高和高度
				{
					pArc->getStartPoint(ptTmp);

					vtZOffset.normalize();
					vtZOffset *= dLen;

					//ptTmp += vtOffset;
					ptTmp += vtZOffset;

					pArc->getStartPoint(ptTmp2);
					dHAdd = ptTmp2.z - ptTmp.z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl - dHAdd);
					}
					break;
				}
			case 4://前线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					pArc->getStartPoint(ptTmp);
					ptTmp2 = ptTmp + vtWidth;

					dThick = dLen;//vtWidth.length();//增加的宽度
					if (vtW.dotProduct(vtWidth) < 1.e-3)//反向
					{
						dThick *= -1.0;
						vtWidth.negate();
					}
					
					if ( (data.dThick + dThick) > 1.e-3)
					{
						pArc->setRadius(dR + 0.5 * dThick);
						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);

							//洞口调整
							AdjustHoleAndPipe(data.dThick,dThick,-1);
						}					
					}
					break;
				}
			case 5://后线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					pArc->getStartPoint(ptTmp);
					ptTmp2 = ptTmp + vtWidth;

					//中线移动一半
					dThick = dLen;//vtWidth.length();//增加的宽度
					if (vtW.dotProduct(vtWidth) > 1.e-3)//正向
					{
						dThick *= -1.0;
					}

					if ( (data.dThick + dThick) > 1.e-3)
					{
						pArc->setRadius(dR - 0.5 * dThick);

						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);

							//洞口调整
							AdjustHoleAndPipe(data.dThick,dThick);
						}
					}
					break;
				}
			case 6://上线mid ->改高度
				{
					pArc->getStartPoint(ptTmp);
					ptTmp2 = ptTmp;
					//ptTmp += vtOffset;
					vtZOffset.normalize();
					vtZOffset *= dLen;
					ptTmp += vtZOffset;

					dHAdd = ptTmp.z - ptTmp2.z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						if ( (data.dH + dHAdd) > 1.e-3)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl);
						}
					}
					break;
				}
			default:
				break;
			}
		}

		//3.圆墙体
		AcDbCircle* pCir = AcDbCircle::cast(pBaseCrv);
		if (pCir != NULL)
		{
			double dR = pCir->radius();
			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0://改内宽
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = vtWidth.length();//增加的宽度
					if (vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
						vtWidth.negate();
					}
					
					if ( (data.dThick + dThick) > 1.e-3)
					{
						//中线移动一半
						//xform.setToTranslation(0.5 * vtWidth);
						pCir->setRadius(dR - 0.5 * dThick);
						
						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);

							//洞口调整
							AdjustHoleAndPipe(data.dThick,dThick,-1);
						}
					}
					break;
				}
			case 1://改半径
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = vtWidth.length();//增加的半径
					if (!vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
					}

					if ( (pCir->radius() + dThick) > 1.e-3)
					{
						pCir->setRadius(pCir->radius() + dThick);

						//洞口改宽
						HoleAndPipeExtend(dThick,AcGeVector3d(0,0,0));
					}
					break;
				}
			case 2://改外宽
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = vtWidth.length();//增加的宽度
					if (!vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
						vtWidth.negate();
					}

					//中线移动一半
					if ( (data.dThick + dThick) > 1.e-3)
					{
						xform.setToTranslation(0.5 * vtWidth);
						//pCir->transformBy(xform);
						pCir->setRadius(dR + 0.5 * dThick);

						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);

							//洞口调整
							AdjustHoleAndPipe(data.dThick,dThick);
						}
					}
					break;
				}
			case 3://下中 ->位移点
				{
					xform.setToTranslation(vtXYOffset);
					pCir->transformBy(xform);
					break;
				}
			case 4://中下 ->拉底,改标高
				{
					ptTmp = pCir->center();
					ptTmp += vtOffset;

					dHAdd = pCir->center().z - ptTmp.z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						if ( (data.dH + dHAdd) > 1.e-3)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl - dHAdd);
						}
					}
					break;
				}
			case 5://顶部中 ->拉高
				{
					ptTmp = pCir->center();
					ptTmp.z = data.dBomEl;
					ptTmp.z += data.dH;

					ptTmp2 = ptTmp;
					ptTmp2 += vtOffset;

					dHAdd = ptTmp2.z - ptTmp.z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						if ( (data.dH + dHAdd) > 1.e-3)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl);
						}
					}
					break;
				}
			default:
				break;
			}
		}

		AcDbEllipse* pEllip = AcDbEllipse::cast(pBaseCrv);
		if (pEllip != NULL)
		{
			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0://改内宽
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = vtWidth.length();//增加的宽度
					if (vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
						vtWidth.negate();
					}

					//中线移动一半
					if ( (data.dThick + dThick) > 1.e-3)
					{
						xform.setToTranslation(0.5 * vtWidth);
						pEllip->transformBy(xform);

						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);
						}
					}
					break;
				}
			case 1://改半径
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = vtWidth.length();//增加的半径
					if (!vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
					}

					AcGeVector3d vtMaj = pEllip->majorAxis();
					double dMaj = vtMaj.length() + dThick;
					vtMaj.normalize();
					vtMaj *= dMaj;

					pEllip->set(pEllip->center(),AcGeVector3d::kZAxis,vtMaj,pEllip->radiusRatio());

					break;
				}
			case 2://改外宽
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = vtWidth.length();//增加的宽度
					if (!vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
						vtWidth.negate();
					}

					//中线移动一半
					if ( (data.dThick + dThick) > 1.e-3)
					{
						xform.setToTranslation(0.5 * vtWidth);
						pEllip->transformBy(xform);

						if (data.nSecShape == eRect)//矩形墙体
						{
							SetWallData(data.dThick + dThick,data.dH,data.dBomEl);
						}
					}
					break;
				}
			case 3://下中 ->位移点
				{
					xform.setToTranslation(vtXYOffset);
					pEllip->transformBy(xform);
					break;
				}
			case 4://中下 ->拉底,改标高
				{
					ptTmp = pEllip->center();
					ptTmp += vtOffset;

					dHAdd = pEllip->center().z - ptTmp.z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						if ( (data.dH + dHAdd) > 1.e-3)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl - dHAdd);
						}
					}

					break;
				}
			case 5://顶部中 ->拉高
				{
					ptTmp = pEllip->center();
					ptTmp.z = data.dBomEl;
					ptTmp.z += data.dH;

					ptTmp2 = ptTmp;
					ptTmp2 += vtOffset;

					dHAdd = ptTmp2.z - ptTmp.z;

					if (data.nSecShape == eRect)//矩形墙体
					{
						if ( (data.dH + dHAdd) > 1.e-3)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dBomEl);
						}
					}
					break;
				}
			default:
				break;
			}
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpMoveWwWallGripPointsAt(const AcDbVoidPtrArray& gripAppData, const AcGeVector3d& offset)
{
	AssertWriteEnabled();
	
	AecGripData* pAppData = NULL;
	AcDbIntArray arIndex;

	if ( gripAppData.isEmpty() )
	{
		return Acad::eOk;
	}

	pAppData = (AecGripData*)gripAppData.first();
	arIndex.append(pAppData->nIndex);

	double dLen = offset.length();

	AcGeVector3d vtOffset = offset;
	AcGeVector3d vtXYOffset;
	vtXYOffset = vtOffset.orthoProject(AcGeVector3d::kZAxis);

	AcGeVector3d vtZOffset;
	vtZOffset = vtOffset.orthoProject(AcGeVector3d::kXAxis);

	AcGeVector3d vtWidth,vtL,vtW,vtH;

	int nGripIndex = arIndex.first();

	AcGeMatrix3d xformM;
	xformM.setToTranslation(vtOffset);

	WallData data;
	GetWallData(data);

	AcGePoint3d ptTmp,ptTmp2;
	AcGeMatrix3d xform;
	double dThick = 0.0,dHAdd = 0.0;
	double dThick2 = 0.0,dH2 = 0.0;

	AcDbCurve* pBaseCrv = m_pBaseCurve;
	if (pBaseCrv != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
		if (pLn != NULL)
		{
			vtL = pLn->endPoint() - pLn->startPoint();
			vtW = vtL;
			vtW.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

			switch(nGripIndex)
			{
			case 0://下中线sta ->改起点
				{
					ptTmp = pLn->startPoint();

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;
					pLn->setStartPoint(ptTmp);
					break;
				}
			case 1://下中线mid ->位置移动
				{
					xform.setToTranslation(vtOffset);
					pLn->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);
					break;
				}
			case 2://下中线End ->改终点
				{
					ptTmp = pLn->endPoint();

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;
					pLn->setEndPoint(ptTmp);
					break;
				}
			case 3://下中线中下 ->改标高
				{
					ptTmp = pLn->startPoint();
					//ptTmp += vtOffset;

					vtZOffset.normalize();
					vtZOffset *= dLen;
					ptTmp += vtZOffset;

					dHAdd = pLn->startPoint().z - ptTmp.z;

					if (data.nSecShape == eWw)//矩形墙体
					{
						if ( (data.dH2 + dHAdd) > 1.e-1)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dThick2,data.dH2 + dHAdd,data.nW2Pos,data.dBomEl - dHAdd,data.kAlign);
						}
					}
					break;
				}
			case 4://前线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					ptTmp = pLn->startPoint();
					ptTmp2 = ptTmp + vtWidth;

					vtWidth.normalize();
					vtWidth *= dLen;
					xform.setToTranslation(0.5 * vtWidth);
					pLn->transformBy(xform);

					dThick2 = dLen;//vtWidth.length();//增加的宽度
					if (!vtW.isCodirectionalTo(vtWidth))
					{
						dThick2 *= -1.0;
					}

					if ( (data.dThick2 + dThick2) > 1.e-2)//矩形墙体
					{
						SetWallData(data.dThick,data.dH,data.dThick2 + dThick2,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
					}
					break;
				}
			case 5://后线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					ptTmp = pLn->startPoint();
					ptTmp2 = ptTmp + vtWidth;

					//中线移动一半
					vtWidth.normalize();
					vtWidth *= dLen;
					xform.setToTranslation(0.5 * vtWidth);
					pLn->transformBy(xform);

					dThick2 = dLen;//vtWidth.length();//增加的宽度
					if (vtW.isCodirectionalTo(vtWidth))
					{
						dThick2 *= -1.0;
					}

					if ( (data.dThick2 + dThick2) > 1.e-2)//矩形墙体
					{
						SetWallData(data.dThick,data.dH,data.dThick2 + dThick2,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
					}
					break;
				}
			case 6://上三个点->中 改高
				{
					//vtH = AcGeVector3d::kZAxis;
					vtH = vtZOffset;
					vtH *= dLen;
					//vtH.z = dLen;//offset.z;

					if ( (data.dH + vtH.z ) > 1.e-2)
					{
						SetWallData(data.dThick,data.dH + vtH.z,data.dThick2,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
					}
					break;
				}
			case 7://宽
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					ptTmp = pLn->startPoint();
					ptTmp2 = ptTmp + vtWidth;

					vtWidth.normalize();
					vtWidth *= dLen;
					xform.setToTranslation(0.5 * vtWidth);
					pLn->transformBy(xform);

					dThick = dLen;//vtWidth.length();//增加的宽度
					if (!vtW.isCodirectionalTo(vtWidth))
					{
						dThick *= -1.0;
					}

					if ( (data.dThick + dThick) > 1.e-2)//矩形墙体
					{
						SetWallData(data.dThick + dThick,data.dH,data.dThick2 + dThick,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
					}
					break;
				}
			case 8://宽
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					ptTmp = pLn->startPoint();
					ptTmp2 = ptTmp + vtWidth;

					//中线移动一半
					vtWidth.normalize();
					vtWidth *= dLen;
					xform.setToTranslation(0.5 * vtWidth);
					pLn->transformBy(xform);

					dThick = dLen;//vtWidth.length();//增加的宽度
					if (vtW.isCodirectionalTo(vtWidth))
					{
						dThick *= -1.0;
					}
					if ( (data.dThick + dThick) > 1.e-2)//矩形墙体
					{
						SetWallData(data.dThick + dThick,data.dH,data.dThick2 + dThick,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
					}
					break;
				}
			default:
				break;
			}
			return Acad::eOk;
		}

		AcDbArc* pArc = AcDbArc::cast(pBaseCrv);
		if (pArc != NULL)
		{
			AcGePoint3d ptGe[3];
			double dSta = 0.0,dEnd = 0.0,dR = 0.0;
			pArc->getStartParam(dSta);
			pArc->getEndParam(dEnd);
			pArc->getPointAtParam((dSta+dEnd) / 2.0,ptGe[1]);

			vtW = ptGe[1] - pArc->center();
			vtW.normalize();

			vtL = vtW;
			vtL.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			dR = pArc->radius();

			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0://下中线sta ->改起点
				{
					pArc->getStartPoint(ptTmp);

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;
					pArc->getEndPoint(ptTmp2);

					AcDbArc* pArcNew = FormatArc(ptTmp,ptGe[1],ptTmp2);
					if (pArcNew != NULL)
					{
						pArc->setStartAngle(pArcNew->startAngle());
						pArc->setEndAngle(pArcNew->endAngle());
						pArc->setCenter(pArcNew->center());
						pArc->setRadius(pArcNew->radius());
						delete pArcNew;
					}
					break;
				}
			case 1://下中线mid ->位置移动
				{
					xform.setToTranslation(vtOffset);
					pArc->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);
					break;
				}
			case 2://下中线End ->改终点
				{
					pArc->getEndPoint(ptTmp);
					pArc->getStartPoint(ptTmp2);

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;

					AcDbArc* pArcNew = FormatArc(ptTmp2,ptGe[1],ptTmp);
					if (pArcNew != NULL)
					{
						pArc->setStartAngle(pArcNew->startAngle());
						pArc->setEndAngle(pArcNew->endAngle());
						pArc->setCenter(pArcNew->center());
						pArc->setRadius(pArcNew->radius());
						delete pArcNew;
					}
					break;
				}
			case 3://中下 1个点 改H2
				{
					pArc->getStartPoint(ptTmp);
					//ptTmp += vtOffset;

					vtZOffset.normalize();
					vtZOffset *= dLen;

					ptTmp += vtZOffset;

					pArc->getStartPoint(ptTmp2);
					dHAdd = ptTmp2.z - ptTmp.z;

					if (data.nSecShape == eWw)//矩形墙体
					{
						if ( (data.dH2 + dHAdd) > 1.e-1)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dThick2,data.dH2 + dHAdd,data.nW2Pos,data.dBomEl - dHAdd,data.kAlign);
						}
					}

					break;
				}
			case 4://前线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					pArc->getStartPoint(ptTmp);
					ptTmp2 = ptTmp + vtWidth;

					dThick2 = dLen;//vtWidth.length();//增加的宽度
					if (vtW.dotProduct(vtWidth) < 1.e-3)//反向
					{
						dThick2 *= -1.0;
					}

					if ( (data.dThick2 + dThick2) > 1.e-3)
					{
						pArc->setRadius(dR + 0.5 * dThick2);
						if ( (data.dThick2 + dThick2) > 1.e-2)
						{
							SetWallData(data.dThick,data.dH,data.dThick2 + dThick2,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
						}					
					}
					break;
				}
			case 5://后线mid ->改宽,不改长
				{
					vtWidth = vtXYOffset.orthoProject(vtL);

					pArc->getStartPoint(ptTmp);
					ptTmp2 = ptTmp + vtWidth;

					//中线移动一半
					dThick2 = dLen;//vtWidth.length();//增加的宽度
					if (vtW.dotProduct(vtWidth) > 1.e-3)//正向
					{
						dThick2 *= -1.0;
					}

					if ( (data.dThick + dThick) > 1.e-3)
					{
						pArc->setRadius(dR - 0.5 * dThick2);
						if ( (data.dThick2 + dThick2) > 1.e-2)
						{
							SetWallData(data.dThick,data.dH,data.dThick2 + dThick2,data.dH2,data.nW2Pos,data.dBomEl,data.kAlign);
						}
					}
					break;
				}
			default:
				break;
			}

			/*
			//下中 3个点 ->0度处 改半径和改内外宽
			vtL = AcGeVector3d::kXAxis;

			ptTmp = pCir->center();
			ptTmp.z = data.dBomEl;
			gripPoints.append(ptTmp);

			ptTmp = pCir->center() + pCir->radius() * vtL;
			ptTmp.z = data.dBomEl;
			gripPoints.append(ptTmp);

			//中下 1个点 ->改标高
			ptTmp.z -= dCmd;
			gripPoints.append(ptTmp);
			return Acad::eOk;
			*/
		}

		AcDbCircle* pCir = AcDbCircle::cast(pBaseCrv);
		if (pCir != NULL)
		{
			switch(pAppData->nIndex)
			{
			case 0://中心,位移
				{
					xform.setToTranslation(vtOffset);
					pCir->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);

					break;
				}
			case 1://改半径
				{
					ptTmp = pCir->center() + pCir->radius() * AcGeVector3d::kXAxis;
					ptTmp += vtXYOffset;

					double dR = ptTmp.distanceTo(pCir->center());
					pCir->setRadius(dR);

					break;
				}
			case 2://改标高
				{
					ptTmp = pCir->center();
					//ptTmp += vtOffset;

					vtZOffset.normalize();
					vtZOffset *= dLen;

					ptTmp += vtZOffset;

					ptTmp2 = pCir->center();
					dHAdd = ptTmp2.z - ptTmp.z;

					if (data.nSecShape == eWw)//矩形墙体
					{
						if ( (data.dH2 + dHAdd) > 1.e-1)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dThick2,data.dH2 + dHAdd,data.nW2Pos,data.dBomEl - dHAdd,data.kAlign);
						}
					}
					break;
				}
			default:
				break;
			}
		}

		AcDbEllipse* pEllip = AcDbEllipse::cast(pBaseCrv);
		if (pEllip != NULL)
		{
			switch(pAppData->nIndex)
			{
			case 0://中心,位移
				{
					xform.setToTranslation(vtOffset);
					pEllip->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);

					break;
				}
			case 1://改半径
				{
					ptTmp = pEllip->center() + pEllip->majorAxis();
					ptTmp += vtXYOffset;

					double dR = ptTmp.distanceTo(pEllip->center());
					AcGeVector3d vtMaj = pEllip->majorAxis();
					vtMaj.normalize();
					vtMaj *= dR;
					pEllip->set(pEllip->center(),pEllip->normal(),vtMaj,pEllip->radiusRatio());

					break;
				}
			case 2://改标高
				{
					ptTmp = pEllip->center();
					//ptTmp += vtOffset;

					vtZOffset.normalize();
					vtZOffset *= dLen;

					ptTmp += vtZOffset;

					ptTmp2 = pEllip->center();
					dHAdd = ptTmp2.z - ptTmp.z;

					if (data.nSecShape == eWw)//矩形墙体
					{
						if ( (data.dH2 + dHAdd) > 1.e-1)
						{
							SetWallData(data.dThick,data.dH + dHAdd,data.dThick2,data.dH2 + dHAdd,data.nW2Pos,data.dBomEl - dHAdd,data.kAlign);
						}
					}
					break;
				}
			default:
				break;
			}
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpMoveUserDefWallGripPointsAt(const AcDbVoidPtrArray& gripAppData, const AcGeVector3d& offset)
{
	AssertWriteEnabled();

	AecGripData* pAppData = NULL;
	AcDbIntArray arIndex;

	if ( gripAppData.isEmpty() )
	{
		return Acad::eOk;
	}

	pAppData = (AecGripData*)gripAppData.first();
	arIndex.append(pAppData->nIndex);

	AcGeVector3d vtOffset = offset;
	AcGeVector3d vtXYOffset;
	vtXYOffset = vtOffset.orthoProject(AcGeVector3d::kZAxis);

	AcGeVector3d vtZOffset;
	vtZOffset = vtOffset.orthoProject(AcGeVector3d::kXAxis);

	AcGeVector3d vtWidth,vtL,vtW,vtH;

	int nGripIndex = arIndex.first();

	AcGeMatrix3d xformM;
	xformM.setToTranslation(vtOffset);

	double dLen = offset.length();

	WallData data;
	GetWallData(data);

	AcGePoint3d ptTmp,ptTmp2;
	AcGeMatrix3d xform;
	double dThick = 0.0,dHAdd = 0.0;
	double dThick2 = 0.0,dH2 = 0.0;

	AcDbCurve* pBaseCrv = m_pBaseCurve;
	if (pBaseCrv != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
		if (pLn != NULL)
		{
			vtL = pLn->endPoint() - pLn->startPoint();
			vtW = vtL;
			vtW.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);


			switch(nGripIndex)
			{
			case 0://下中线sta ->改起点
				{
					ptTmp = pLn->startPoint();

					vtZOffset.normalize();
					vtZOffset *= dLen;

					ptTmp += vtXYOffset;
					pLn->setStartPoint(ptTmp);
					break;
				}
			case 1://下中线mid ->位置移动
				{
					xform.setToTranslation(vtOffset);
					pLn->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);
					break;
				}
			case 2://下中线End ->改终点
				{
					ptTmp = pLn->endPoint();

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;
					pLn->setEndPoint(ptTmp);
					break;
				}
			default:
				break;
			}
			return Acad::eOk;
		}

		AcDbArc* pArc = AcDbArc::cast(pBaseCrv);
		if (pArc != NULL)
		{
			AcGePoint3d ptGe[3];
			double dSta = 0.0,dEnd = 0.0,dR = 0.0;
			pArc->getStartParam(dSta);
			pArc->getEndParam(dEnd);
			pArc->getPointAtParam((dSta+dEnd) / 2.0,ptGe[1]);

			vtW = ptGe[1] - pArc->center();
			vtW.normalize();

			vtL = vtW;
			vtL.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);
			dR = pArc->radius();

			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0://下中线sta ->改起点
				{
					pArc->getStartPoint(ptTmp);

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;
					pArc->getEndPoint(ptTmp2);

					AcDbArc* pArcNew = FormatArc(ptTmp,ptGe[1],ptTmp2);
					if (pArcNew != NULL)
					{
						pArc->setStartAngle(pArcNew->startAngle());
						pArc->setEndAngle(pArcNew->endAngle());
						pArc->setCenter(pArcNew->center());
						pArc->setRadius(pArcNew->radius());
						delete pArcNew;
					}
					break;
				}
			case 1://下中线mid ->位置移动
				{
					xform.setToTranslation(vtOffset);
					pArc->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);
					break;
				}
			case 2://下中线End ->改终点
				{
					pArc->getEndPoint(ptTmp);
					pArc->getStartPoint(ptTmp2);

					vtXYOffset.normalize();
					vtXYOffset *= dLen;

					ptTmp += vtXYOffset;

					AcDbArc* pArcNew = FormatArc(ptTmp2,ptGe[1],ptTmp);
					if (pArcNew != NULL)
					{
						pArc->setStartAngle(pArcNew->startAngle());
						pArc->setEndAngle(pArcNew->endAngle());
						pArc->setCenter(pArcNew->center());
						pArc->setRadius(pArcNew->radius());
						delete pArcNew;
					}
					break;
				}
			}
			return Acad::eOk;
		}

		AcDbCircle* pCir = AcDbCircle::cast(pBaseCrv);
		if (pCir != NULL)
		{
			double dR = 0.0;
			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0:// 下中 ->位移点
				{
					xform.setToTranslation(vtOffset);
					pCir->transformBy(xform);
					break;
				}
			case 1://改半径
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = dLen;//vtWidth.length();//增加的半径
					if (!vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
					}

					dR = pCir->radius() + dThick;
					if (dR > 1.e-2)
					{
						pCir->setRadius(pCir->radius() + dThick);
					}
					break;
				}
			default:
				break;
			}
			return Acad::eOk;
		}

		AcDbEllipse* pEllip = AcDbEllipse::cast(pBaseCrv);
		if (pEllip != NULL)
		{
			double dR = 0.0;
			switch(pAppData->nIndex)//最多 6 个点
			{
			case 0://改半径
				{
					vtWidth = vtXYOffset.orthoProject(AcGeVector3d::kYAxis);
					dThick = dLen;//vtWidth.length();//增加的半径
					if (!vtWidth.isCodirectionalTo(AcGeVector3d::kXAxis))
					{
						dThick *= -1.0;
					}

					dR = pEllip->majorAxis().length() + dThick;
					if (dR > 1.e-2)
					{
						AcGeVector3d vtMaj = pEllip->majorAxis();
						vtMaj.normalize();
						vtMaj *= dR;

						pEllip->set(pEllip->center(),pEllip->normal(),vtMaj,pEllip->radiusRatio());
					}
					break;
				}
			case 1://下中 ->位移点
				{
					xform.setToTranslation(vtOffset);
					pEllip->transformBy(xform);

					break;
				}
			default:
				break;
			}
			return Acad::eOk;
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::ImpMoveXShapeSectionWallGripPointsAt(const AcDbVoidPtrArray& gripAppData, const AcGeVector3d& offset)
{
	AssertWriteEnabled();

	AecGripData* pAppData = NULL;
	AcDbIntArray arIndex;

	if ( gripAppData.isEmpty() )
	{
		return Acad::eOk;
	}

	pAppData = (AecGripData*)gripAppData.first();
	arIndex.append(pAppData->nIndex);

	AcGeVector3d vtOffset = offset;
	AcGeVector3d vtXYOffset;
	vtXYOffset = vtOffset.orthoProject(AcGeVector3d::kZAxis);

	AcGeVector3d vtZOffset;
	vtZOffset = vtOffset.orthoProject(AcGeVector3d::kXAxis);

	AcGeVector3d vtWidth,vtL,vtW,vtH;

	int nGripIndex = arIndex.first();

	AcGeMatrix3d xformM;
	xformM.setToTranslation(vtOffset);

	double dLen = offset.length();

	WallData data;
	GetWallData(data);

	AcGePoint3d ptTmp,ptTmp2;
	AcGeMatrix3d xform;
	double dThick = 0.0,dHAdd = 0.0;
	double dThick2 = 0.0,dH2 = 0.0;

	AcDbCurve* pBaseCrv = m_pBaseCurve;
	if (pBaseCrv != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(pBaseCrv);
		if (pLn != NULL)
		{
			vtL = pLn->endPoint() - pLn->startPoint();
			vtW = vtL;
			vtW.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);


			switch(nGripIndex)
			{
			case 0://下中线sta ->改起点
				{
					ptTmp = pLn->startPoint();

					vtZOffset.normalize();
					vtZOffset *= dLen;

					ptTmp += vtZOffset;
					pLn->setStartPoint(ptTmp);
					break;
				}
			case 1://下中线mid ->位置移动
				{
					xform.setToTranslation(vtOffset);
					pLn->transformBy(xform);
					TransformAssocPartEnt(xform);
					TransformDTYGPartEnt(xform);
					break;
				}
			case 2://下中线End ->改终点
				{
					ptTmp = pLn->endPoint();

					vtZOffset.normalize();
					vtZOffset *= dLen;

					ptTmp += vtZOffset;
					pLn->setEndPoint(ptTmp);
					break;
				}
			default:
				break;
			}
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::subGetStretchPoints(AcGePoint3dArray& stretchPoints) const
{
	assertReadEnabled();

	if (m_pBaseCurve != NULL)
	{
		AcGeVector3d vt;
		AcGePoint3d ptSta,ptEnd,ptMid;

		AcDbLine* pLn = AcDbLine::cast(m_pBaseCurve);
		if (pLn != NULL)
		{
			ptSta = pLn->startPoint();
			ptEnd = pLn->endPoint();
			ptMid = MidPoint(ptSta,ptEnd);
			vt = ptEnd - ptSta;

			pLn->getStretchPoints(stretchPoints);
			
			vt.normalize();
			vt.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

			WallData data;
			GetWallData(data);

			//厚度
			ptMid += vt * 0.5 * data.dThick;
			stretchPoints.append(ptMid);

			ptMid -= vt * data.dThick;
			stretchPoints.append(ptMid);

			//底部墙体标高
			ptMid.z = data.dBomEl;
			stretchPoints.append(ptMid);

			//顶部墙体高度
			ptMid.z += data.dH;
			stretchPoints.append(ptMid);
		}
		else
		{
			m_pBaseCurve->getStretchPoints(stretchPoints);

			WallData data;
			GetWallData(data);

			//墙体高度
			double dS = 0.0,dE = 0.0;
			getStartParam(dS);
			getEndParam(dE);

			getPointAtParam((dS + dE) / 2.0,ptMid);

			//底部墙体标高
			ptMid.z = data.dBomEl;
			stretchPoints.append(ptMid);

			ptMid.z += data.dH;
			stretchPoints.append(ptMid);
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::MoveHeightStretchPoint(int nPos,const AcGeVector3d& offset)
{
	AssertWriteEnabled();

	AcGeVector3d vtZ;
	vtZ = offset.orthoProject(AcGeVector3d::kYAxis);

	double dh = vtZ.length();

	if (nPos == 0)//底部标高位点
	{
		double dH = 0.0;
		m_mapSpecXData.GetAt(KEY_SIZE2,dH);

		if (vtZ.isCodirectionalTo(AcGeVector3d::kZAxis))
		{
			dh *= -1.0;
		}

		WallData data;
		GetWallData(data);

		dH += dh;
		data.dBomEl -= dh;

		if (dH > 10.0)//至少10个高度
		{
			int nW2Pos = 0;
			m_mapSpecXData.GetAt(KEY_W2POS,nW2Pos);

			SetWallData(data.dThick,dH,data.dThick2,data.dH2,nW2Pos,data.dBomEl,kMid);

			AcGeMatrix3d xMove;
			xMove.setToTranslation(vtZ);
			m_pBaseCurve->transformBy(xMove);
		}
	}
	else if (nPos == 1)//顶部高度位点
	{
		if (vtZ.isCodirectionalTo(-AcGeVector3d::kZAxis))
		{
			dh *= -1.0;
		}

		double dH = 0.0;
		m_mapSpecXData.GetAt(KEY_SIZE2,dH);

		dH += dh;
		if (dH > 10.0)//至少10个高度
		{
			WallData data;
			GetWallData(data);

			int nW2Pos = 0;
			m_mapSpecXData.GetAt(KEY_W2POS,nW2Pos);

			SetWallData(data.dThick,dH,data.dThick2,data.dH2,nW2Pos,data.dBomEl,kMid);
		}
	}
	return Acad::eOk;
}

Acad::ErrorStatus AecDbXWall::subMoveStretchPointsAt(const AcDbIntArray& indices,const AcGeVector3d& offset)
{
	AssertWriteEnabled();
	ClearForDraw2dables();

	Acad::ErrorStatus es;
	if (m_pBaseCurve != NULL)
	{
		AcDbLine* pLn = AcDbLine::cast(m_pBaseCurve);
		if (pLn != NULL) //直线墙体
		{
			AcGePoint3dArray arPts;
			pLn->getStretchPoints(arPts);

			//由于增加的墙体高度,所以arPts + 2
			//0,1.. nStartIndex (厚度) ,nStartIndex+1 (厚度) ,nStartIndex+2 (高度)

			int nStartIndex = arPts.length();

			//如果含有墙体高度的index
			extern BOOL IsFrontView();
			if (IsFrontView())
			{
				if (indices.find(nStartIndex + 2) != -1 &&
					indices.find(nStartIndex + 3) == -1)//含有底部标高位点,且立面拉伸
				{
					return MoveHeightStretchPoint(0,offset);
				}

				if (indices.find(nStartIndex + 3) != -1 &&
					indices.find(nStartIndex + 2) == -1)//含有顶部高度位点,且立面拉伸
				{
					return MoveHeightStretchPoint(1,offset);
				}

				if (indices.find(nStartIndex + 3) != -1 &&
					indices.find(nStartIndex + 2) != -1)
				{
					//移动
					AcGeMatrix3d xMove;
					xMove.setToTranslation(offset);
					
					//立面移动
					double dh = offset.length();
					if (offset.isCodirectionalTo(AcGeVector3d::kZAxis))
					{
						dh *= -1.0;
					}
					WallData data;
					GetWallData(data);

					data.dBomEl -= dh;

					int nW2Pos = 0;
					m_mapSpecXData.GetAt(KEY_W2POS,nW2Pos);

					SetWallData(data.dThick,data.dH,data.dThick2,data.dH2,nW2Pos,data.dBomEl,kMid);

					m_pBaseCurve->transformBy(xMove);
				}
				return Acad::eOk;
			}

			//其他俯视图的拉伸处理....
			AcGePoint3d ptSta = pLn->startPoint();
			AcGePoint3d ptEnd = pLn->endPoint();
			AcGePoint3d ptMid = MidPoint(ptSta,ptEnd);
			AcGeVector3d vtL = ptEnd - ptSta;
			vtL.z = 0.0;
			
			//3
			AcGeVector3d vtV = vtL;
			vtV.rotateBy(PI / 2.0,AcGeVector3d::kZAxis);

			//4
			AcGeVector3d vtV0 = vtV;
			vtV0.negate();

			AcGeVector3d vtOff = offset;
			vtOff.z = 0.0;

			//0,1.. nStartIndex,nStartIndex+1
			//如果含有 nStartIndex 或 nStartIndex+1
			int nbHasThickGrip = 0;
			int nGripIndex = 0;
			for (int i = 0;i < indices.length();i++)
			{
				nGripIndex = indices.at(i);
				if (nGripIndex == nStartIndex || nGripIndex == (nStartIndex+1))
				{
					nbHasThickGrip += nGripIndex;
				}
			}

			if (nbHasThickGrip < ( 2 * nStartIndex + 1)  && 
				nbHasThickGrip >= nStartIndex )//只有一个的情况
			{
				double dAngL = vtOff.angleTo(vtL);
				if ( (dAngL - PI / 2.0) > 1.e-10)
				{
					dAngL = PI - dAngL;
				}

				double dAngV = vtOff.angleTo(vtV);
				if ( (dAngV - PI / 2.0) > 1.e-10)
				{
					dAngV = PI - dAngV;
				}

				if (dAngL < dAngV)//标准拉伸
				{
					es = m_pBaseCurve->moveStretchPointsAt(indices,offset);
				}
				else
				{
					double dL = offset.length();
					vtOff = offset.orthoProject(vtL);
					vtOff.normalize();
					vtOff *= dL;

					double dThick = 0.0;
					m_mapSpecXData.GetAt(KEY_SIZE1,dThick);
					if (nbHasThickGrip == nStartIndex)//vtV
					{
						if (vtOff.dotProduct(vtV) > 1.e-10)
						{
							//增厚
							dThick += dL;
						}
						else
						{
							dThick -= dL;
						}

						ptSta += 0.5 * vtOff;
						ptEnd += 0.5 * vtOff;

						pLn->setStartPoint(ptSta);
						pLn->setEndPoint(ptEnd);
						
						double dH = 0.0,dBomEl = 0.0;
						m_mapSpecXData.GetAt(KEY_SIZE2,dH);
						m_mapSpecXData.GetAt(PIPE_EL,dBomEl);

						double dThick2 = 0.0,dH2 = 0.0;
						m_mapSpecXData.GetAt(KEY_SIZE3,dThick2);
						m_mapSpecXData.GetAt(KEY_SIZE4,dH2);
						int nW2Pos = 0;
						m_mapSpecXData.GetAt(KEY_W2POS,nW2Pos);

						SetWallData(dThick,dH,dThick2,dH2,nW2Pos,dBomEl,kMid);
					}
					else// 4 vtV0
					{
						if (vtOff.dotProduct(vtV0) > 1.e-10)
						{
							//增厚
							dThick += dL;
						}
						else
						{
							dThick -= dL;
						}
						ptSta += 0.5 * vtOff;
						ptEnd += 0.5 * vtOff;

						pLn->setStartPoint(ptSta);
						pLn->setEndPoint(ptEnd);

						double dH = 0.0,dBomEl = 0.0;
						m_mapSpecXData.GetAt(KEY_SIZE2,dH);
						m_mapSpecXData.GetAt(PIPE_EL,dBomEl);

						double dThick2 = 0.0,dH2 = 0.0;
						m_mapSpecXData.GetAt(KEY_SIZE3,dThick2);
						m_mapSpecXData.GetAt(KEY_SIZE4,dH2);

						int nW2Pos = 0;
						m_mapSpecXData.GetAt(KEY_W2POS,nW2Pos);

						SetWallData(dThick,dH,dThick2,dH2,nW2Pos,dBomEl,kMid);
					}
				}
			}
			else
			{
				es = m_pBaseCurve->moveStretchPointsAt(indices,offset);
			}
		}
		else
		{
			AcGePoint3dArray arPts;
			m_pBaseCurve->getStretchPoints(arPts);

			//由于增加的墙体高度,所以arPts + 2
			//0,1.. nStartIndex (厚度) ,nStartIndex+1 (厚度) ,nStartIndex+2 (高度)

			int nStartIndex = arPts.length();

			//如果含有墙体高度的index
			extern BOOL IsFrontView();
			if (IsFrontView())
			{
				if (indices.find(nStartIndex + 0) != -1 &&
					indices.find(nStartIndex + 1) == -1)//含有底部标高位点,且立面拉伸
				{
					return MoveHeightStretchPoint(0,offset);
				}

				if (indices.find(nStartIndex + 1) != -1 &&
					indices.find(nStartIndex + 0) == -1)//含有顶部高度位点,且立面拉伸
				{
					return MoveHeightStretchPoint(1,offset);
				}

				if (indices.find(nStartIndex + 0) != -1 &&
					indices.find(nStartIndex + 1) != -1)
				{
					//移动
					AcGeMatrix3d xMove;
					xMove.setToTranslation(offset);

					//立面移动
					double dh = offset.length();
					if (offset.isCodirectionalTo(AcGeVector3d::kZAxis))
					{
						dh *= -1.0;
					}
					WallData data;
					GetWallData(data);

					data.dBomEl -= dh;

					int nW2Pos = 0;
					m_mapSpecXData.GetAt(KEY_W2POS,nW2Pos);

					SetWallData(data.dThick,data.dH,data.dThick2,data.dH2,nW2Pos,data.dBomEl,kMid);

					m_pBaseCurve->transformBy(xMove);
				}

				return Acad::eOk;
			}

			//其他位点
			es = m_pBaseCurve->moveStretchPointsAt(indices,offset);
		}
	}
	return es;
}

Acad::ErrorStatus AecDbXWall::AdjustHoleAndPipe(double dThickOld,double dThickAdd,int nDir)
{
	AcDbObjectId id;
	AcDbEntity* pEnt = NULL;
	Acad::ErrorStatus es;

	if (objectId().isValid())
	{
		for (int i = 0;i < m_arAssocPartEntIds.length();i++)
		{
			id = m_arAssocPartEntIds.at(i);
			if ( Acad::eOk == (es = acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite)))
			{
				AecDbX3dPartEntity* pPart = AecDbX3dPartEntity::cast(pEnt);
				if (pPart != NULL)
				{
					pPart->AdjustHoleAndPipe(dThickOld,dThickAdd,nDir);
				}
				pEnt->close();
			}
		}
	}
	return Acad::eOk;
}

SHJson::WValue& AecDbXWall::ToJson(bool bExprotGeo) const
{
	assertReadEnabled();
	return AecDbBDPipeBase::ToJson(bExprotGeo);
}

bool AecDbXWall::ByJson(const SHJson::WValue &v)
{
	AssertWriteEnabled();
	return AecDbBDPipeBase::ByJson(v);
}

bool AecDbXWall::GetBimInfoTip(CString& sInfoTip) const
{
	assertReadEnabled();

	WallData data;
	GetWallData(data);

	CString sField,sFmt;
	if (data.nSecShape == eRect)//矩形
	{
		sField = _T("矩形截面墙:\n");
		sInfoTip += sField;

		MAKEFIELD(_T("墙体厚度"),_T("%.1f 毫米"),data.dThick,sInfoTip)

		MAKEFIELD(_T("墙体高度"),_T("%.1f 毫米"),data.dH,sInfoTip)

		MAKEFIELD(_T("墙体长度"),_T("%.1f 毫米"),GetLength(),sInfoTip)

		MAKEFIELD(_T("墙体低标高"),_T("%.3f 毫米"),data.dBomEl,sInfoTip)

		MAKEFIELD(_T("墙体体积"),_T("%.3f 立方米"),GetVolume() / 1.e9,sInfoTip)

		MAKEFIELD(_T("墙体面积"),_T("%.3f 平方米"),GetArea() / 1.e6,sInfoTip)

		MAKEFIELD(_T("墙体材质"),_T("%s"),data.szMat,sInfoTip)
		
		MAKEFIELD(_T("墙体编号"),_T("%s"),data.szNO,sInfoTip)
	}
	else if(data.nSecShape == eWw)//不等宽墙
	{
		sField = _T("不等厚截面墙:\n");
		sInfoTip += sField;

		MAKEFIELD(_T("墙体底厚度"),_T("%.1f 毫米"),data.dThick2,sInfoTip)

		MAKEFIELD(_T("墙体底高度"),_T("%.1f 毫米"),data.dH2,sInfoTip)

		MAKEFIELD(_T("墙体顶厚度"),_T("%.1f 毫米"),data.dThick,sInfoTip)

		MAKEFIELD(_T("墙体总高度"),_T("%.1f 毫米"),data.dH,sInfoTip)

		MAKEFIELD(_T("墙体长度"),_T("%.1f 毫米"),GetLength(),sInfoTip)

		MAKEFIELD(_T("墙体低标高"),_T("%.3f 毫米"),data.dBomEl,sInfoTip)

		MAKEFIELD(_T("墙体体积"),_T("%.3f 立方米"),GetVolume() / 1.e9,sInfoTip)

		MAKEFIELD(_T("墙体面积"),_T("%.3f 平方米"),GetArea() / 1.e6,sInfoTip )

		MAKEFIELD(_T("墙体材质"),_T("%s"),data.szMat,sInfoTip)

		MAKEFIELD(_T("墙体编号"),_T("%s"),data.szNO,sInfoTip)
	}
	else if (data.nSecShape == eUserDef)//自定义截面
	{
		sField = _T("自定义截面墙:\n");
		sInfoTip += sField;

		MAKEFIELD(_T("墙体总厚"),_T("%.1f 毫米"),data.dThick,sInfoTip)

		MAKEFIELD(_T("墙体总高"),_T("%.1f 毫米"),data.dH,sInfoTip)

		MAKEFIELD(_T("墙体长度"),_T("%.1f 毫米"),GetLength(),sInfoTip)

		MAKEFIELD(_T("墙体低标高"),_T("%.3f 毫米"),data.dBomEl,sInfoTip)

		MAKEFIELD(_T("墙体体积"),_T("%.3f 立方米"),GetVolume() / 1.e9,sInfoTip )

		MAKEFIELD(_T("墙体面积"), _T("%.3f 平方米"),GetArea() / 1.e6,sInfoTip )

		MAKEFIELD(_T("墙体材质"),_T("%s"),data.szMat,sInfoTip)

		MAKEFIELD(_T("墙体编号"),_T("%s"),data.szNO,sInfoTip)
	}
	else
	{
		//...
	}
	return true;
}

int AecDbXWall::GetSectionDraw(const AcGePoint3d &ptFr, const AcGePoint3d &ptTo, const AcGeVector3d &vtViewDir, const AcGeVector3d &vtTo, AcDbVoidPtrArray &arRegionPtrs) const
{
	AcDbVoidPtrArray arGetPtrs;
	AecDbBDPipeBase::GetSectionDraw(ptFr, ptTo, vtViewDir, vtTo, arGetPtrs);

	AcDbEntity *pEnt = NULL;
	AcDbCurve *pCrv = NULL;
	AcGePoint3d ptS, ptE;

	WallData data;
	GetWallData(data);

	for (int n = 0;n < arGetPtrs.length();n++)
	{
		pEnt = (AcDbEntity*)arGetPtrs.at(n);
		pCrv = AcDbCurve::cast(pEnt);

		if (pCrv != NULL)
		{
			pCrv->getStartPoint(ptS);
			pCrv->getEndPoint(ptE);

			if (fabs(ptS.distanceTo(ptE) - data.dThick) < 1.e-2)//和墙体等宽
			{
				m_mapSpecXData.Write(pCrv, _T("BIMDATA"));
			}
		}
	}
	arRegionPtrs.append(arGetPtrs);

	return 0;
}

void AecDbXWall::ProcessHlrResult(const AcArray<AcDbEntity *> &ar
	, const std::map<AcDbEntity *, AcArray<AcDbEntity *>> &preAr
	, AcArray<AcDbEntity *> &output) const
{
	double dW(.0);
	BOOL bBold = HlrCutOption::getEnvCutLW(this, dW);

	HlrCutOption::ProcessHlrResult(this
		, bBold
		, dW
		, FALSE
		, ar
		, preAr
		, output);
}

void AecDbXWall::PreprocessForHlr(const AcGePoint3d & ptPlnO
	, const AcGeVector3d & vtPlnN
	, AcArray<AcDbEntity*>& ar) const
{
	// 如果实体和剖面相交，标记
	HlrCutOption::setIntersectWithSection(this, AcGePlane(ptPlnO, vtPlnN));
}

bool AecDbXWall::GetProperties(SimpleProperty::PropertySetByIndex &porpertys) const
{
	/* 墙体类型 尺寸 标高 材质 不等厚设置 对齐方式 */

	// 调用基类属性（如果需要）
	AecDbBDPipeBase::GetProperties(porpertys);
	CoreTools::setLayerPorperty(porpertys);
	CoreTools::setSubSystemPorperty(porpertys);

	WallData data;
	::memset(&data, 0, sizeof(WallData));
	GetWallData(data);

	// 1. 墙体类型 (根据几何基线判断)
	CString sWallType = _T("单线墙");
	AcDbCurve *pCurve = GetBaseCurve();
	if (pCurve != NULL)
	{
		if (pCurve->isKindOf(AcDbArc::desc()))
		{
			sWallType = _T("弧墙");
		}
		// 还可以判断 AcDbCircle 等，但界面上只有单线和弧墙/圆墙
		DELETE_PTR(pCurve);
	}
	SimpleProperty::makeAndInsert(porpertys, _T("墙体类型"), sWallType, false);

	bool bUserDef = (data.nSecShape == eUserDef);

	// 2. 基础属性
	if (!bUserDef)
	{
		SimpleProperty::makeAndInsert(porpertys, _T("异形墙体"), _T("否"), false);
		SimpleProperty::makeAndInsert(porpertys, _T("墙体厚度"), data.dThick, true);
		SimpleProperty::makeAndInsert(porpertys, _T("墙体总高度"), data.dH, true);
	}
	else
		SimpleProperty::makeAndInsert(porpertys, _T("异形墙体"), _T("是"), false);

	SimpleProperty::makeAndInsert(porpertys, _T("底部标高"), data.dBomEl, true);
	SimpleProperty::makeAndInsert(porpertys, _T("墙体材质"), data.szMat, true);

	// 补充：如果是中线对齐，界面上有一个"中线对齐左厚" (IDC_EDIT3)
	// 虽然你没明确提，但为了完整性，通常会加上
	if (data.kAlign == kMid)
	{
		double dLW = 0.5 * data.dThick;
		// 从 SpecialtyData 中获取 KEY_L，参考 SetFromWall
		GetSpecialtyData()->GetAt(KEY_L, dLW);
		SimpleProperty::makeAndInsert(porpertys, _T("中线对齐左厚"), dLW, true);
	}

	// 3. 自定义截面 (对应 IDC_CHECK1)
	// 在 SetFromWall 中: data.nSecShape == eUserDef 时 m_bUserDefSec = TRUE
	CString s(bUserDef ? _T("是") : _T("否"));
	SimpleProperty::makeAndInsert(porpertys, _T("自定义截面"), s, false);


	// 4. 基线对齐方式 (对应 IDC_RADIO1, 2, 3)
	CString sAlignBase = _T("中线对齐");
	switch (data.kAlign)
	{
	case kMid: sAlignBase = _T("中线对齐"); break;
	case kLeft: sAlignBase = _T("左线对齐"); break;
	case kRight: sAlignBase = _T("右线对齐"); break;
	default: break;
	}
	std::vector<CString> ss;
	ss.push_back(_T("中线对齐"));
	ss.push_back(_T("左线对齐"));
	ss.push_back(_T("右线对齐"));
	SimpleProperty::makeAndInsert(porpertys, _T("基线对齐方式"), sAlignBase, true, ss);


	// 5. 墙体不等厚 (对应 IDC_CHECK2)
	// 在 SetFromWall 中: data.nSecShape == eWw 时 m_bHasW2 = TRUE
	bool bUnequal = (data.nSecShape == eWw);
	s = bUnequal ? _T("是") : _T("否");
	ss.clear();
	ss.push_back(_T("是"));
	ss.push_back(_T("否"));
	SimpleProperty::makeAndInsert(porpertys, _T("墙体不等厚"), s, false, ss);
	if (!bUserDef)
	{
		// 只有不等厚为"是"时，才显示下面的详细参数
		if (bUnequal)
		{
			SimpleProperty::makeAndInsert(porpertys, _T("墙体底部厚度"), data.dThick2, true);
			SimpleProperty::makeAndInsert(porpertys, _T("墙体底部高度"), data.dH2, true);

			// 不等厚墙体对齐方式 (对应 IDC_RADIO7, 8, 9)
			// nW2Pos 通常对应 Radio 的索引: 0=左, 1=中, 2=右
			CString sAlignW2 = _T("左侧外伸");
			switch (data.nW2Pos)
			{
			case 0: sAlignW2 = _T("左侧外伸"); break;
			case 1: sAlignW2 = _T("居中对称"); break;
			case 2: sAlignW2 = _T("右侧外伸"); break;
			default: break;
			}
			ss.clear();
			ss.push_back(_T("左侧外伸"));
			ss.push_back(_T("居中对称"));
			ss.push_back(_T("右侧外伸"));
			SimpleProperty::makeAndInsert(porpertys, _T("不等厚墙体对齐方式"), sAlignW2, true, ss);
		}
	}
	return true;
}

bool AecDbXWall::SetProperties(SimpleProperty::PropertySetByName &properties)
{
	using namespace SimpleProperty;
	if (properties.m_set.empty()) return false;
	AecDbBDPipeBase::SetProperties(properties);

	WallData data;
	::memset(&data, 0, sizeof(WallData));
	GetWallData(data);

	AecDbObjXDataMap *pData = &m_mapSpecXData;

	// 是否自定义截面不会被修改
	bool bUserDef = (data.nSecShape == eUserDef);
	// 是否不等厚墙体也不会被修改
	bool bUnequal = (data.nSecShape == eWw);

	// 先取出修改之前的作为默认值
	int ali = data.kAlign;
	CString s;
	if (properties.findAndSet(_T("基线对齐方式"), s))
	{	// 如果修改过,则被覆盖
		if (s == _T("中线对齐")) ali = kMid;
		else if (s == _T("左线对齐")) ali = kLeft;
		else  ali = kRight;
		pData->SetAt(KEY_ALIGN, ali);
	}

	properties.findAndSet<double>(_T("墙体厚度"), pData, KEY_SIZE1);
	properties.findAndSet<double>(_T("墙体总高度"), pData, KEY_SIZE2);


	properties.findAndSet<double>(_T("底部标高"), pData, PIPE_EL);
	properties.findAndSet<CString>(_T("墙体材质"), pData, KEY_MATERIAL);

	properties.findAndSet<double>(_T("中线对齐左厚"), pData, KEY_L);

	
	properties.findAndSet<double>(_T("墙体底部厚度"), pData, KEY_SIZE3);
	properties.findAndSet<double>(_T("墙体底部高度"), pData, KEY_SIZE4);

	int nW2Pos = data.nW2Pos;
	if (properties.findAndSet(_T("不等厚墙体对齐方式"), s))
	{
		if (s == _T("左侧外伸")) nW2Pos = 0;
		else if (s == _T("居中对称")) nW2Pos = 1;
		else nW2Pos = 2;
		pData->SetAt(KEY_W2POS, nW2Pos);
	}

	// 先取出修改之前的作为默认值
	double dEl(data.dBomEl);
	double dW(data.dThick), dH(data.dH), dW2(data.dThick2), dH2(data.dH2);

	// 现在取出最新的(如果被修改过)
	pData->GetAt(PIPE_EL, dEl);
	pData->GetAt(KEY_SIZE1, dW);
	pData->GetAt(KEY_SIZE2, dH);
	pData->GetAt(KEY_SIZE3, dW2);
	pData->GetAt(KEY_SIZE4, dH2);
	if (bUserDef)
	{
		// 自定义截面,对齐永远是kMid
		pData->SetAt(KEY_ALIGN, kMid);
		SetWallData(dEl, kMid);
		// 其他不变
	}
	else if (bUnequal)
	{
		SetWallData(dW, dH, dW2, dH2, nW2Pos, dEl, (EAlign)ali);
		AdjustHoleAndPipe(dW - data.dThick);
	}
	else
	{
		SetWallData(dW, dH, dEl, (EAlign)ali);
		AdjustHoleAndPipe(dW - data.dThick);
		
		// 目前参考HZQTDlg.cpp来看,只有普通墙才会修改门窗
		AcDbObjectIdArray arAssocIds;
		GetAssocPartIds(arAssocIds);
		Acad::ErrorStatus es;
		AcDbEntity *pEnt = NULL;
		AcDbObjectId id;
		for (int i = 0; i < arAssocIds.length(); i++)
		{
			id = arAssocIds.at(i);
			if (Acad::eOk == (es = acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite)))
			{
				AecDbXOpening *pOpen = AecDbXOpening::cast(pEnt);
				if (pOpen != NULL)
				{
					OpeningData data;
					memset(&data, 0, sizeof(OpeningData));
					pOpen->GetOpeningData(data);
					data.dThick = dW;
					pOpen->UpdateOpeningData(data);
				}
				pEnt->close();
			}
		}
	}

	
	AcGeMatrix3d xformEl;
	AcGeVector3d vtMove(0, 0, dEl - data.dBomEl);
	xformEl.setToTranslation(vtMove);

	TransformDTYGPartEnt(xformEl);
	TransformAssocPartEnt(xformEl);

	return true;
}