envi-code/SourceCode/Code2026/ElecCmd/ElecCmdCommand.cpp

#include "StdAfx.h"
#include "StdArx.h"
#include "dbobjptr.h"
#include "CoreTools.h"
#include "AecDbEwCable.h"
#include "AecDbEwPipeDim.h"
#include "AecDbECableTray.h"
#include "AecDbEcFitting.h"
#include "AecDbEwEquipment.h"
#include "AecDb3dRoadAxisLine.h"
#include "AecDbX3dPartEntity.h"
#include "AecDbEwFlexiblePipe.h"
#include "AecInfCmdGrip.h"
#include "AecDbWall.h"
#include "AecDbSlab.h"
#include "AecDbECableJig.h"
#include "EarThwormDef.h"
#include "AecDbECableLine.h"
#include "AecDbDirPosition.h"
#include "KTCadUtility.h"
#include "KTCADUtilityEx.h"
#include "KTTempTol.h"
#include "KTCADSysVar.h"
#include "OffSetDlg.h"
#include "KTSetting.h"
#include "HDLGDlg.h"
#include "AcPolylineJig.h"
#include "PSDLDlg.h"
#include "DCQJDlg.h"
#include "AECStatusRecord.h"
#include "ECableParamDlg.h"
#include "CablelineTools.h"
#include "CHBLWDlg.h"
#include "CRXLGDlg.h"
#include "CHBLDDlg.h"
#include "BDQGDlg.h"
#include "CHZXGDlg.h"
#include "CDLFSDlg.h"
#include "CLJQXDlg.h"
#include "CSBTBDlg.h"
#include "KTExpressCalc.h"
#include "CXYCDDlg.h"
#include "CHFZDDlg.h"
#include "CYXKKDlg.h"
#include "CSDFSDlg.h"
#include "excel9.h"
#include "CSTXXDlg.h"
#include "CDLCKDLG.h"
#include "CSBBMDlg.h"
#include "GJXGDlg.h"
#include "FITLockedDlg.h"
#include "AecPipeLineModify.h"
#include "CQJBZDlg.h"
#include "KTModelLayoutXData.h"

#define DXF_PIPE _T("AEC_DBCABTRY")
#define DXF_PIPE_ONLY _T("AEC_DBCABTRY")
#define DXF_PIPE_DIM_ONLY _T("AEC_DBCABTRY,LINE")
#define DXF_PIPE_FIT_DIM_ONLY _T("AEC_DBCABTRY,AEC_DBECFIT,LINE")

#define DXF_PIPE_FIT _T("AEC_DBCABTRY,AEC_DBECFIT")
#define DXF_PIPE_FIT_DIM _T("AEC_DBCABTRY,AEC_DBECFIT,LINE")
#define DXF_ECABLE _T("AEC_EWCABLE")

#define gLayer_Pipe_Dim _T("LAY_PP3D_DIM")
#define gTextStyle_Pipe_Dim  _T("Pipe_Dim")

extern bool DLLIMPEXP PickGripMessage(GripMessage& msg);
extern void DLLIMPEXP PushGripMessage(GripMessage&);
DLLIMPEXP bool GetDoubleClickEnt(LPCTSTR pszCmd,AcDbObjectId& id);

extern double GetElbowL(AecHvac::DuctParam* pParam);
extern double GetElbowLx(AecHvac::DuctParam* pParam);
extern AcGePoint3d MidPoint(const AcGePoint3d& pt1,const AcGePoint3d& pt2);
extern void SortPoints(AcGePoint3dArray& points,AcDbCurve* pLine);

void FreeBuffer(int n, AcDbVoidPtrArray& arEntPtrs)
{
	AcDbEntity* pEnt = NULL;
	while (arEntPtrs.length() > n)
	{
		pEnt = (AcDbEntity*)arEntPtrs.last();
		pEnt->erase();
		pEnt->close();
		DELETE_PTR(pEnt);
		arEntPtrs.removeLast();
	}
}

AcDbRegion* CreatePolygonRegionOnly(AcGePoint3d* pPoints,int nSize)
{
	AcDbVoidPtrArray arCurPtrs;
	for (int i = 0;i < nSize-1;i++)//5
	{
		if (pPoints[i].distanceTo(pPoints[i+1]) > 1.e-6)
		{
			AcDbLine* pLine = new AcDbLine(pPoints[i],pPoints[i+1]);
			arCurPtrs.append(pLine);

			//TEST
			//AcDbLine* pCLn = (AcDbLine*)pLine->clone();
			//pCLn->setColorIndex(1);
			//AddToModelSpace(pCLn);
		}
	}

	AcDbVoidPtrArray arRegPtrs;
	AcDbRegion* pReg = NULL;
	Acad::ErrorStatus es = Acad::eOk;
	if ( Acad::eOk == ( es = AcDbRegion::createFromCurves(arCurPtrs,arRegPtrs) ) )
	{
		//FREE
		AcDbEntity* pEnt = NULL;
		for (int i = 0;i < arCurPtrs.length();i++)
		{
			pEnt = (AcDbEntity*)arCurPtrs.at(i);
			DELETE_PTR(pEnt);
		}
		return (AcDbRegion*)arRegPtrs.first();
	}

	//error FREE
	FreeBuffer(0,arCurPtrs);
	return NULL;
}

void EL_HZQJCmdFnc()
{
	AecDbECableJig jig;
	jig.DoIt(WPipe::eBridge);
}

bool GetSamplePoints(AcDbCurve *pCurve, int nDivSegs, AcGePoint3dArray &arPts)
{
	if (pCurve == NULL) return FALSE;

	double dS = 0, dE = 0;
	pCurve->getStartParam(dS);
	pCurve->getEndParam(dE);

	double dStep = (dE - dS) / nDivSegs;
	AcGePoint3d pt;

	for (int i = 0; i <= nDivSegs; i++)
	{
		if (Acad::eOk == pCurve->getPointAtParam(dS, pt))
		{
			arPts.append(pt);
		}
		dS += dStep;
	}

	return true;
}

class CAutoWndDel
{
public:
	CAutoWndDel() { m_pWnd = NULL; }
	~CAutoWndDel()
	{
		if (m_pWnd != NULL)
		{
			delete m_pWnd;
		}
	}
	CWnd* m_pWnd;
};

void EL_LJQJCmdFnc()
{
	//选择路径
	ads_name ent1;
	struct resbuf *pRb = acutBuildList(RTDXF0, _T("LINE,ARC,AEC_ROADAXISLINE,LWPOLYLINE,POLYLINE"), 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择路径(直线,圆弧,路径线,多义线):"), ent1, pRb);
	if (nRes == RTNORM)
	{
		AcDbObjectId id;
		acdbGetObjectId(id, ent1);

		AcGePoint3d pt;
		AcGePoint3dArray arPts;
		bool bHasFit = true;

		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead) )
		{
			AcDbLine *pLn = AcDbLine::cast(pEnt);
			if (pLn != NULL)
			{
				arPts.append(pLn->startPoint());
				arPts.append(pLn->endPoint());
			}

			AcDbPolyline *pPl = AcDbPolyline::cast(pEnt);
			if (pPl != NULL)
			{
				if (pPl->hasBulges())
				{
					pEnt->close();
					acutPrintf(_T("\n选择的PLINE线不可以有圆弧!"));
					return;
				}

				for (int i = 0;i < pPl->numVerts();i++)
				{
					pPl->getPointAt(i, pt);
					arPts.append(pt);
				}
			}

			AcDb3dPolyline *pPl3d = AcDb3dPolyline::cast(pEnt);
			if (pPl3d != NULL)
			{
				AcGePoint3dArray arPts;

				AcDbEntity *pVEnt = NULL;
				AcDbObjectIterator *pIt = pPl3d->vertexIterator();
				for (pIt->start(); !pIt->done(); pIt->step())
				{
					pVEnt = pIt->entity();

					AcDb3dPolylineVertex *pVtex = AcDb3dPolylineVertex::cast(pVEnt);
					if (pVtex != NULL)
					{
						arPts.append(pVtex->position());
					}
				}
			}

			AecDb3dRoadAxisLine *pRoad = AecDb3dRoadAxisLine::cast(pEnt);
			if (pRoad != NULL)
			{
				pRoad->GetReferLineSegPoints(arPts, false);
			}

			AcDbArc *pArc = AcDbArc::cast(pEnt);
			if (pArc != NULL)
			{
				AcDbArc *pArc = AcDbArc::cast(pEnt);
				if (pArc != NULL)
				{
					double dLen = (pArc->endAngle() - pArc->startAngle()) * pArc->radius();

					CAcModuleResourceOverride myResources;
					
					CHFZDDlg dlg;
					dlg.SetLen(dLen);
					nRes = dlg.DoModal();
					if (nRes == IDOK)
					{
						bHasFit = false;
						GetSamplePoints(pArc, dlg.GetSegCount(), arPts);

						if (dlg.m_bEraseArc)
						{
							pEnt->upgradeOpen();
							pEnt->erase();
							pEnt->downgradeOpen();
						}
					}
				}
			}
			pEnt->close();
		}

		AecDbECableJig jig;
		jig.DoItOnPath(WPipe::eBridge,arPts, bHasFit);
	}
}

//路径缆沟
void EL_LJLGCmdFnc()
{
	//选择路径
	ads_name ent1;
	struct resbuf *pRb = acutBuildList(RTDXF0, _T("LINE,ARC,AEC_ROADAXISLINE,LWPOLYLINE,POLYLINE"), 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择路径(直线,圆弧,路径线,多义线):"), ent1, pRb);
	if (nRes == RTNORM)
	{
		AcDbObjectId id;
		acdbGetObjectId(id, ent1);

		AcGePoint3d pt;
		AcGePoint3dArray arPts;
		bool bHasFit = true;

		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
		{
			AcDbLine *pLn = AcDbLine::cast(pEnt);
			if (pLn != NULL)
			{
				arPts.append(pLn->startPoint());
				arPts.append(pLn->endPoint());
			}

			AcDbPolyline *pPl = AcDbPolyline::cast(pEnt);
			if (pPl != NULL)
			{
				if (pPl->hasBulges())
				{
					pEnt->close();
					acutPrintf(_T("\n选择的PLINE线不可以有圆弧!"));
					return;
				}

				for (int i = 0; i < pPl->numVerts(); i++)
				{
					pPl->getPointAt(i, pt);
					arPts.append(pt);
				}
			}

			AcDb3dPolyline *pPl3d = AcDb3dPolyline::cast(pEnt);
			if (pPl3d != NULL)
			{
				AcGePoint3dArray arPts;

				AcDbEntity *pVEnt = NULL;
				AcDbObjectIterator *pIt = pPl3d->vertexIterator();
				for (pIt->start(); !pIt->done(); pIt->step())
				{
					pVEnt = pIt->entity();

					AcDb3dPolylineVertex *pVtex = AcDb3dPolylineVertex::cast(pVEnt);
					if (pVtex != NULL)
					{
						arPts.append(pVtex->position());
					}
				}
			}

			AecDb3dRoadAxisLine *pRoad = AecDb3dRoadAxisLine::cast(pEnt);
			if (pRoad != NULL)
			{
				pRoad->GetReferLineSegPoints(arPts, false);
			}

			AcDbArc *pArc = AcDbArc::cast(pEnt);
			if (pArc != NULL)
			{
				AcDbArc *pArc = AcDbArc::cast(pEnt);
				if (pArc != NULL)
				{
					double dLen = (pArc->endAngle() - pArc->startAngle()) * pArc->radius();

					CAcModuleResourceOverride myResources;

					CHFZDDlg dlg;
					dlg.SetLen(dLen);
					nRes = dlg.DoModal();
					if (nRes == IDOK)
					{
						bHasFit = false;
						GetSamplePoints(pArc, dlg.GetSegCount(), arPts);

						if (dlg.m_bEraseArc)
						{
							pEnt->upgradeOpen();
							pEnt->erase();
							pEnt->downgradeOpen();
						}
					}
				}
			}
			pEnt->close();
		}

		AecDbECableJig jig;
		jig.DoItOnPath(WPipe::eTrench, arPts, bHasFit);
	}
}

//多层桥架
void EL_PCQJCmdFnc()
{
	CAcModuleResourceOverride myResources;
	CDCQJDlg dlg;
	if ( IDOK == dlg.DoModal() )
	{
		AcArray<AecHvac::DuctParam*> arParamPtrs;
		dlg.GetPipeParams(arParamPtrs);

		AecDbECableJig* pJig = NULL;
		AcArray<AecDbECableJig*> arJigPtrs;
		AecHvac::DuctParam* pParam = NULL;
		for (int i = 0;i < arParamPtrs.length();i++)
		{
			pParam = (AecHvac::DuctParam*)arParamPtrs.at(i);
			pJig = new AecDbECableJig(pParam);
			pJig->InitXYPlanStatusRecs();
			arJigPtrs.append(pJig);
		}

		//单线Jig;
		AcPolylineJig plJig;
		plJig.InitStatusRecsForLineSegs();
		if ( plJig.DoIt() )
		{
			AcDbObjectId id = plJig.GetRoadAxisLineId();

			AcDbEntity* pEnt = NULL;
			if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForWrite))
			{
				AecDb3dRoadAxisLine* pRoad = AecDb3dRoadAxisLine::cast(pEnt);
				if (pRoad != NULL)
				{
					//获取一系列点
					AcGePoint3dArray arPts;
					AcDbPolyline* pPl = pRoad->ConvertTo2dPline();
					if (pPl != NULL)
					{
						AcGePoint3d ptGe;
						for (int i = 0;i < pPl->numVerts();i++)
						{
							pPl->getPointAt(i,ptGe);
							arPts.append(ptGe);
						}
						delete pPl;
					}

					AcGePoint3d ptGe;
					for (int ii = 0;ii < arJigPtrs.length();ii++)
					{
						pJig = arJigPtrs.at(ii);
						pParam = (AecHvac::DuctParam*)arParamPtrs.at(ii);

						for (int i = 0;i < arPts.length();i++)
						{
							ptGe = arPts.at(i);
							ptGe.z = pParam->m_dEl;

							pJig->SetPickPoint(ptGe);
							pJig->AfterDrag();
							pJig->EndDragRecord();
						}
					}
				}
				pEnt->erase();
				pEnt->close();
			}
		}

		for (int ii = 0;ii < arJigPtrs.length();ii++)
		{
			pJig = arJigPtrs.at(ii);
			delete pJig;
		}
	}
}

void DBL_AEC_DBCABTRY()
{
	AcDbObjectId id;
	bool bIsOk = GetDoubleClickEnt(_T("DBL_AEC_DBCABTRY"),id);

	if (bIsOk && id.isValid())
	{
		AcGePoint3d ptS;
		AcGePoint3d ptE;
		AcGeVector3d vt;

		AecHvac::DuctParam param;
		memset(&param,0,sizeof(AecHvac::DuctParam));
		BOOL bGetParam = FALSE;

		XHolder lHolder, rHolder;
		memset(&lHolder, 0, sizeof(XHolder));
		memset(&rHolder, 0, sizeof(XHolder));

		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt,id,AcDb::kForRead))
		{
			AecDbECableTray* pPipe = AecDbECableTray::cast(pEnt);
			if (pPipe != NULL)
			{
				pPipe->GetDuctParam(param);
				ptS = pPipe->StartPoint();
				ptE = pPipe->EndPoint();

				if (param.m_app == WPipe::eTrench)
				{
					pPipe->GetXHolder(kLeft, lHolder);
					pPipe->GetXHolder(kRight, rHolder);
				}

				vt = ptE - ptS;
				bGetParam = TRUE;
			}
			pEnt->close();
		}

		if (bGetParam)
		{
			bool bIsXElPipe = false;
			double dElOld = param.m_dEl;

			AcGeLine3d ln(ptS,vt);
			if (!ln.isParallelTo(AcGePlane::kXYPlane))
			{
				bIsXElPipe = true;
			}

			CAcModuleResourceOverride myResources;

			if (param.m_app == WPipe::eTrench)
			{
				CHDLGDlg drawCnfgDLg;
				drawCnfgDLg.EnableLoadLast(FALSE);
				drawCnfgDLg.SetShowParam(param);
				drawCnfgDLg.SetXHolder(lHolder,rHolder);

				drawCnfgDLg.LockEl(bIsXElPipe);//锁定标高
				drawCnfgDLg.SetAlignEnable(FALSE);//锁定对齐

				int nRes = drawCnfgDLg.DoModal();
				if (nRes == IDOK)
				{
					drawCnfgDLg.GetPipeParam(&param);
					drawCnfgDLg.GetXHolder(lHolder, rHolder);

					if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
					{
						AecDbECableTray *pPipe = AecDbECableTray::cast(pEnt);
						if (pPipe != NULL)
						{
							pPipe->SetDuctParam(&param);
							pPipe->SetXHolder(kLeft, lHolder);
							pPipe->SetXHolder(kRight, rHolder);
						}
						pEnt->close();

						if (fabs(param.m_dEl - dElOld) > 1.e-2)//标高改动
						{
							//发送管口改动消息
							AcGeVector3d vtOffset(0, 0, param.m_dEl - dElOld);

							GripMessage msg;
							//reset
							msg.nSegindex = -1;
							msg.nType = -1;
							msg.idHost.setNull();
							msg.pParam = 0;
							msg.nData = -1;
							_tcscpy(msg.szLockId, _T("0"));//锁定id,如果有
							msg.fData = 0;
							msg.nSegindex = 0;
							msg.nSubSegIndex = 0;
							msg.vtOffset.set(0, 0, 0);
							msg.ptGrip.set(0, 0, 0);

							msg.nType = eMid;
							msg.nData = -1;
							msg.idHost = id;
							msg.vtOffset = vtOffset;

							PushGripMessage(msg);
						}
					}
				}
			}
			else
			{
				CECableParamDlg drawCnfgDLg;
				drawCnfgDLg.EnableLoadLast(FALSE);
				drawCnfgDLg.SetShowParam(param);
				drawCnfgDLg.LockEl(bIsXElPipe);//锁定标高
				drawCnfgDLg.SetAlignEnable(FALSE);//锁定对齐
				drawCnfgDLg.SetEditObj(id);
				int nRes = drawCnfgDLg.DoModal();
				if (nRes == IDOK)
				{
					memset(&param, 0, sizeof(AecHvac::DuctParam));
					drawCnfgDLg.GetPipeParam(&param);

					if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
					{
						AecDbECableTray *pPipe = AecDbECableTray::cast(pEnt);
						if (pPipe != NULL)
						{
							pPipe->SetDuctParam(&param);
						}
						pEnt->close();

						if (fabs(param.m_dEl - dElOld) > 1.e-2)//标高改动
						{
							//发送管口改动消息
							AcGeVector3d vtOffset(0, 0, param.m_dEl - dElOld);

							GripMessage msg;
							//reset
							msg.nSegindex = -1;
							msg.nType = -1;
							msg.idHost.setNull();
							msg.pParam = 0;
							msg.nData = -1;
							_tcscpy(msg.szLockId, _T("0"));//锁定id,如果有
							msg.fData = 0;
							msg.nSegindex = 0;
							msg.nSubSegIndex = 0;
							msg.vtOffset.set(0, 0, 0);
							msg.ptGrip.set(0, 0, 0);

							msg.nType = eMid;
							msg.nData = -1;
							msg.idHost = id;
							msg.vtOffset = vtOffset;

							PushGripMessage(msg);
						}
					}
				}
			}
		}
	}
}

void DBL_AEC_DBECFIT()
{
	AcDbObjectId id;
	bool bIsOk = GetDoubleClickEnt(_T("DBL_AEC_DBECFIT"), id);

	if (bIsOk && id.isValid())
	{
		AecHvac::DuctParam param;
		memset(&param, 0, sizeof(AecHvac::DuctParam));
		BOOL bGetParam = FALSE;

		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
		{
			AecDbEcFitting *pFit = AecDbEcFitting::cast(pEnt);
			if (pFit != NULL)
			{
				pFit->GetDuctParam(param);
				bGetParam = TRUE;
			}
			pEnt->close();
		}

		if (bGetParam)
		{
			CAcModuleResourceOverride myResources;
			if (param.m_app == WPipe::eTrench)//电缆沟
			{
			}
			else
			{
				
			}
		}
	}
}

extern bool DLLIMPEXP GetPipeNetNodes(const AcDbObjectId &id1, AcDbObjectIdArray &arNetIds, const AcDbObjectId &id0, const AcDbObjectId &id2);
extern bool DLLIMPEXP GetPipeNetNodes(const AcDbObjectId &id1, AcDbObjectIdArray &arNetIds, BOOL bTeeStop, BOOL bCrossStop,BOOL bReducerStop);
void EL_QJBGCmdFnc()
{
	//弹出对话框
	CAcModuleResourceOverride myResources;
	CGJXGDlg dlg;
	if (IDOK != dlg.DoModal())
		return;

	//选择桥架,或电缆沟
	ads_name ent;
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE_ONLY, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择桥架变更尺寸:"), ent, pRb);
	if (nRes == RTNORM)
	{
		AcDbObjectId id1;
		acdbGetObjectId(id1, ent);

		//获取管网
		AcDbObjectIdArray arNetIds;
		GetPipeNetNodes(id1, arNetIds, dlg.m_bTeeStop, dlg.m_bCrossStop,TRUE);

		AcDbEntity *pEnt = NULL;
		for (int i = 0; i < arNetIds.length(); i++)
		{
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt, arNetIds.at(i), AcDb::kForWrite))
			{
				pEnt->highlight();
				pEnt->close();
			}
		}

		TCHAR szDummy[133];
		nRes = acedGetString(0, _T("\n按 <RETURN> 确认修改."), szDummy);
		if (nRes != RTNORM)
		{
			for (int i = 0; i < arNetIds.length(); i++)
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, arNetIds.at(i), AcDb::kForRead))
				{
					pEnt->unhighlight();
					pEnt->close();
				}
			}
			acutRelRb(pRb);

			//解锁所有的Fit
			for (int i = 0; i < arNetIds.length(); i++)
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, arNetIds.at(i), AcDb::kForWrite))
				{
					AecDbEcFitting *pFit = AecDbEcFitting::cast(pEnt);
					if (pFit != NULL)
					{
						pFit->LockInf(-1);
					}
					pEnt->close();
				}
			}
			return;
		}

		AcDbObjectIdArray arFitIds, arPipeIds, arEquIds;

		bool bFitPosLock = false;
		AcGePoint3dArray arFitInfPts;

		//acutPrintf(_T("\n%d:%s"),nRes,szDummy);
		for (int i = 0; i < arNetIds.length(); i++)
		{
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt, arNetIds.at(i), AcDb::kForRead))
			{
				//分出管子和管件
				AecDbECableTray *pWpipe = AecDbECableTray::cast(pEnt);
				if (pWpipe != NULL)
				{
					arPipeIds.append(arNetIds.at(i));
				}

				AecDbEcFitting *pFit = AecDbEcFitting::cast(pEnt);
				if (pFit != NULL)
				{
					arFitIds.append(arNetIds.at(i));

					int nType = -1;
					pFit->GetSpecialtyData()->GetAt(KEY_RUNTIME, nType);

					EFittingType eType = (EFittingType)nType;
					if (eType == eElbow ||
						eType == eTee ||
						eType == eWye ||
						eType == eLateral ||
						eType == eCross)
					{

						AcArray<AecInterface> arInfs;
						pFit->GetInterface(arInfs);

						for (int ii = 0; ii < arInfs.length(); ii++)
						{
							AecInterface &inf = arInfs.at(ii);

							if (arFitInfPts.find(inf.ptPos) == -1)
							{
								arFitInfPts.append(inf.ptPos);
							}
							else
							{
								bFitPosLock = true;
							}
						}
					}
				}

				//桥架，电缆沟上没有设备 如阀门之类 /////
				/*AecDbEwEquipment *pEqu = AecDbEwEquipment::cast(pEnt);
				if (pEqu != NULL)
				{
					arEquIds.append(arNetIds.at(i));
				}*/

				pEnt->unhighlight();
				pEnt->close();
			}
		}

		//判断弯头接弯头的定位位置锁定情况
		if (bFitPosLock)
		{
			CAcModuleResourceOverride rcTmp;
			CFITLockedDlg fitDlg;
			fitDlg.DoModal();
			//acedAlert(_T("选择的管线存在弯头三通四通相互连接定位位置锁定!不可管线变更!"));
			return;
		}

		AecHvac::DuctParam param;
		memset(&param, 0, sizeof(AecHvac::DuctParam));

		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id1, AcDb::kForRead))
		{
			AecDbECableTray *pPipe = AecDbECableTray::cast(pEnt);
			if (pPipe != NULL)
			{
				pPipe->GetDuctParam(param);
			}
			pEnt->close();
		}

		AecHvac::DuctParam paramNew;
		memset(&paramNew, 0, sizeof(AecHvac::DuctParam));

		CAcModuleResourceOverride myResources;
		bool bGetParam = false;
		if (param.m_app == WPipe::eTrench)
		{
			CHDLGDlg drawCnfgDLg;
			drawCnfgDLg.EnableLoadLast(FALSE);
			drawCnfgDLg.LockEl(true);//锁定标高
			drawCnfgDLg.SetShowParam(param);
			drawCnfgDLg.SetAlignEnable(FALSE);//锁定对齐

			nRes = drawCnfgDLg.DoModal();
			if (nRes == IDOK)
			{
				drawCnfgDLg.GetPipeParam(&paramNew);
				bGetParam = true;
			}
			else
			{
				return;
			}
		}
		else
		{
			CECableParamDlg drawCnfgDLg;
			drawCnfgDLg.EnableLoadLast(FALSE);
			drawCnfgDLg.LockEl(true);//锁定标高
			drawCnfgDLg.SetShowParam(param);
			drawCnfgDLg.SetAlignEnable(FALSE);//锁定对齐

			nRes = drawCnfgDLg.DoModal();
			if (nRes == IDOK)
			{
				drawCnfgDLg.GetPipeParam(&paramNew);
				bGetParam = true;
			}
			else
			{
				return;
			}
		}
		
		if (bGetParam)
		{
			AecPipeLineModify pipeModify;
			pipeModify.m_bTeeStop = dlg.m_bTeeStop;
			pipeModify.m_bCrossStop = dlg.m_bCrossStop;
			pipeModify.m_bElLock = true;
			pipeModify.SetPipeParamOld(&param);
			pipeModify.SetPipeNetIds(arNetIds);

			//设置undo标记
			SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("BE"), RTNONE);
			if (pipeModify.ModifyPipeLineParam(arPipeIds, arFitIds, arEquIds, paramNew, FALSE))
			{
				pipeModify.AddjustTInfAssoc();
				SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("E"), RTNONE);
			}
			else
			{
				SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("B"), RTNONE);
			}
		} 
		acutRelRb(pRb);
		CoreTools::refreshGraphics();
	}
}

void EL_cabtryaddCmdFnc()
{
	GripMessage msg;
	PickGripMessage(msg);

	if (msg.nType >= eCommand0 && msg.nType <= eCommand20)
	{
		AcDbObjectId id = msg.idHost;

		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenObject(pEnt, id, AcDb::kForWrite))
		{
			CString sLayer = pEnt->layer();

			AecDbECableTray* pPipe = AecDbECableTray::cast(pEnt);
			if (pPipe != NULL) //管子拉伸命令
			{
				AecInterface intf;
				pPipe->AecMInterfaces::GetInterface(msg.ptGrip, intf);

				if (!pPipe->AecMInterfaces::HasInterface(msg.ptGrip, intf.vtDir))
				{
					//是中间夹点
					AcGeVector3d vtDir = pPipe->EndPoint() - pPipe->StartPoint();
					//vtDir.rotateBy(PI / 2.0, pPipe->normal()); //? Z
					vtDir.rotateBy(PI / 2.0, AcGeVector3d::kZAxis); //? Z
					intf.vtDir = vtDir;
					intf.ptPos = msg.ptGrip;
				}

				//判断是否是管子sta点
				AcGePoint3d ptSta = pPipe->StartPoint();
				if (ptSta.distanceTo(intf.ptPos) < 1.e-1)
				{
					AcGeVector3d vtDir = intf.vtDir;
					//vtDir.negate();//不需要反转
					intf.vtDir = vtDir;
				}

				AecHvac::DuctParam param;
				memset(&param, 0, sizeof(AecHvac::DuctParam));
				pPipe->GetDuctParam(param);

				AecUserInterface infu;
				if (pPipe->GetUserInterface(intf.ptPos, infu))
				{
					if (infu.nPoints == 2)
					{
						param.dSize[0] = infu.ptGe[0].distanceTo(infu.ptGe[1]);
						intf.vtDir = infu.vtDir;
						intf.idOwner.setNull();
					}
					else if (infu.nPoints == 4)
					{
						param.dSize[0] = infu.ptGe[0].distanceTo(infu.ptGe[1]);
						param.dSize[1] = infu.ptGe[1].distanceTo(infu.ptGe[2]);
						intf.vtDir = infu.vtDir;
						intf.idOwner.setNull();
					}
				}
				
				param.m_dEl = intf.ptPos.z;
				pEnt->close();

				AecDbECableJig jig;
				jig.DoIt(&intf, &param);
				return;
			}

			AecDbEcFitting* pWFit = AecDbEcFitting::cast(pEnt);
			if (pWFit != NULL) //管件拉伸命令
			{
				AecInterface intf;
				pWFit->AecMInterfaces::GetInterface(msg.ptGrip, intf);

				AecHvac::DuctParam param;
				memset(&param, 0, sizeof(AecHvac::DuctParam));
				pWFit->GetDuctParam(param);

				AecUserInterface infu;
				if (pWFit->GetUserInterface(intf.ptPos, infu))
				{
					if (infu.nPoints == 2)
					{
						param.dSize[0] = infu.ptGe[0].distanceTo(infu.ptGe[1]);
						intf.vtDir = infu.vtDir;
					}
					else if (infu.nPoints == 4)
					{
						param.dSize[0] = infu.ptGe[0].distanceTo(infu.ptGe[1]);
						param.dSize[1] = infu.ptGe[1].distanceTo(infu.ptGe[2]);
						intf.vtDir = infu.vtDir;
					}
				}

				param.m_dEl = intf.ptPos.z;
				pEnt->close();

				AecDbECableJig jig;
				jig.DoIt(&intf, &param);
				return;
			}

			AecDbEwEquipment* pWEqu = AecDbEwEquipment::cast(pEnt);
			if (pWEqu != NULL) //设备元件拉伸命令
			{
				AecInterface intf;
				pWEqu->AecMInterfaces::GetInterface(msg.ptGrip, intf);
				pEnt->close();

				AecDbECableJig jig;
				jig.DoIt(&intf, NULL); //需要选择管子的外径等规格
				return;
			}

			AecDbX3dPartEntity* pXPart = AecDbX3dPartEntity::cast(pEnt);
			if (pXPart != NULL)
			{
				AecInterface intf;
				pXPart->AecMInterfaces::GetInterface(msg.ptGrip, intf);
				pEnt->close();

				AecDbECableJig jig;
				jig.DoIt(&intf, NULL); //需要选择管子的外径等规格
				return;
			}

			//命令夹点拉伸命令
			AecInfCmdGrip* pPt = AecInfCmdGrip::cast(pEnt);
			if (pPt != NULL)
			{
				AecInterface intf;
				pPt->GetInf(intf);

				AecDbECableJig jig;
				jig.DoIt(&intf, NULL); //需要选择管子的外径等规格
				return;
			}
			pEnt->close();
		}
	}
}

void AddUserinfTee(AecDbECableTray* pPipeMaj, AecDbECableTray* pPipeMin, AcGeVector3d& vtMaj, AcGeVector3d& vtMin)
{
	AecHvac::DuctParam paramM, paramN;
	pPipeMaj->GetDuctParam(paramM);
	pPipeMin->GetDuctParam(paramN);

	AcGeLine3d lnM(pPipeMaj->StartPoint(),vtMaj);
	if (lnM.isParallelTo(AcGePlane::kXYPlane) &&
		vtMin.isParallelTo(AcGeVector3d::kZAxis) )//
	{
		//vtMin 投影到 Maj
		AcDbVoidPtrArray arEntPtrs, arReslt;
		pPipeMin->GetDraw2dables(0,arEntPtrs);

		AcDbCurve* pCurve = KTCADUtilityEx::ConvertBoundCurve(arEntPtrs,arReslt);
		if (pCurve != NULL)
		{
			AcDbPolyline *pPl = AcDbPolyline::cast(pCurve);
			if (pPl != NULL)
			{
				//取其中4个角点
				AecUserInterface uinf;
				pPipeMin->objectId().handle().getIntoAsciiBuffer(uinf.szNo);
				_tcscpy(uinf.szSys, paramN.szSys);
				uinf.vtDir = vtMin;

				AcGePoint3d ptS, ptE,ptM,ptTmp;
				ptE = pPipeMin->EndPoint();
				ptS = pPipeMin->StartPoint();
				ptM = MidPoint(ptS, ptE);
				pPipeMaj->getClosestPointTo(ptM, ptTmp);

				AcGeVector3d vtTmp = ptM - ptTmp;
				if (vtTmp.dotProduct(vtMin) < 0)
				{
					uinf.vtDir.negate();
				}
				uinf.vtDir.normalize();

				//XY 面
				if (pPl->numVerts() >= 4)
				{
					uinf.nPoints = 5;
					for (int i = 0;i < 4;i++)
					{
						pPl->getPointAt(i, uinf.ptGe[i]);
					}
					uinf.ptGe[4] = uinf.ptGe[0];

					AcGeVector3d vtZ(0, 0, 1);
					vtZ *= paramM.m_dEl;

					for (int i = 0;i < 5;i++)
					{
						uinf.ptGe[i] += vtZ;//到cen线

						//到面
						uinf.ptGe[i] += uinf.vtDir * 0.5 * paramM.dSize[1];
 					}
				}

				AecDbECableJig jig;
				AecDbECableLine pipeLine(&jig);
				pipeLine.SetPipeParam(&paramM);
				double dL = GetElbowL(&paramM);
				double dLx = GetElbowLx(&paramM);

				pipeLine.SplitWPipe(ptTmp, dL, pPipeMaj);

				uinf.vtDir.normalize();
				uinf.vtDir *= ( dL + dLx);

				pipeLine.AddTee3(ptTmp,dL,vtMaj,vtMin,uinf);

				//改变 pPipeMin 的长度
				AcGePlane plan;
				plan.set(uinf.ptGe[0], uinf.vtDir);

				AcGePoint3d ptS1 = plan.closestPointTo(ptS);
				AcGePoint3d ptE1 = plan.closestPointTo(ptE);

				double dDis1 = ptS1.distanceTo(ptS);
				double dDis2 = ptE1.distanceTo(ptE);
				if (dDis1 < dDis2)
				{
					ptS1 += uinf.vtDir;
					pPipeMin->SetStartPoint(ptS1);
				}
				else
				{
					ptE1 += uinf.vtDir;
					pPipeMin->SetEndPoint(ptE1);
				}

				//TEST
				//pPl->setColorIndex(1);
				//CoreTools::AddToModelSpace(pPl);
				delete pPl;
			}
		}
		return;
	}

	//调换添加
	AcGeLine3d lnN(pPipeMin->StartPoint(), vtMin);
	if (lnN.isParallelTo(AcGePlane::kXYPlane) &&
		vtMaj.isParallelTo(AcGeVector3d::kZAxis) )//
	{
		//vtMaj 投影到 vtMin
		AddUserinfTee(pPipeMin, pPipeMaj, vtMin, vtMaj);
		return;
	}
}

//添加三通
void EL_TJ3TCmdFnc()
{
	ads_name ent1, ent2;

	struct resbuf* pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择主桥架:"), ent1, pRb);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n选择支桥架:"), ent2, pRb);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1;
			acdbGetObjectId(id1, ent1);

			AcDbObjectId id2;
			acdbGetObjectId(id2, ent2);

			AcDbEntity* pEnt1 = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				AecDbECableTray* pPipeMaj = AecDbECableTray::cast(pEnt1);
				if (pPipeMaj != NULL)
				{
					AcDbEntity* pEnt2 = NULL;
					if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
					{
						AecDbECableTray* pPipeMin = AecDbECableTray::cast(pEnt2);
						if (pPipeMin != NULL)
						{
							AcGeLine3d ln1(pPipeMaj->StartPoint(), pPipeMaj->EndPoint());
							AcGeLine3d ln2(pPipeMin->StartPoint(), pPipeMin->EndPoint());

							AcGeVector3d vtMaj = pPipeMaj->EndPoint() - pPipeMaj->StartPoint();
							AcGeVector3d vtMin = pPipeMin->EndPoint() - pPipeMin->StartPoint();
							vtMaj.normalize();
							vtMin.normalize();

							AcGeVector3d vtNom = vtMaj.crossProduct(vtMin);
							if (vtNom.isParallelTo(AcGeVector3d::kZAxis))
							{
								//水平三通
								AcGePoint3d ptMid, ptTemp1, ptTemp2;
								if (ln1.intersectWith(ln2, ptMid)) //相交
								{
									AecHvac::DuctParam param2;
									memset(&param2, 0, sizeof(AecHvac::DuctParam));
									pPipeMaj->GetDuctParam(param2);

									AecHvac::DuctParam param1;
									memset(&param1, 0, sizeof(AecHvac::DuctParam));
									pPipeMin->GetDuctParam(param1);

									if (param1.m_app != param2.m_app)
									{
										pEnt1->close();
										pEnt2->close();
										acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以三通连接!"));
										return;
									}

									if (param1.m_app == WPipe::eTrench)
									{
										pEnt1->close();
										pEnt2->close();
										acutPrintf(_T("\n选择的实体是缆沟!不可以异形三通连接!"));
										return;
									}

									double dRatio = param2.m_dRatio;
									double dLx = GetElbowLx(&param2);
									double dL = GetElbowL(&param2);
									double dS = dL;

									AecDbECableJig jig;
									AecDbECableLine pipeLine(&jig);
									pipeLine.SetPipeParam(&param1);

									//也可能加弯头,ptMid的两头有一在管子外
									ptTemp1 = ptMid + vtMaj * dL;
									ptTemp2 = ptMid - vtMaj * dL;

									AcGeLineSeg3d lineGe(pPipeMaj->StartPoint(), pPipeMaj->EndPoint());
									BOOL bAddTee = TRUE;
									if (!lineGe.isOn(ptTemp1) || !lineGe.isOn(ptTemp2))
									{
										if (fabs(param1.dSize[0] - param2.dSize[0]) < 1.e-3) //==
										{
											pEnt1->close();
											pEnt2->close();

											bAddTee = FALSE;
											if (pipeLine.AddElbow(id1, ptMid, id2))
											{
											}
											return;
										}
										else// 只能加三通
										{
											bAddTee = TRUE;
										}
									}

									if (bAddTee)
									{
										if (fabs(param1.dSize[1] - param2.dSize[1]) < 1.e-3)
										{
											int nPos = 1;//落在末端附近
											double dDis1 = ptMid.distanceTo(pPipeMin->StartPoint());
											double dDis2 = ptMid.distanceTo(pPipeMin->EndPoint());
											if (dDis1 < dDis2)
												nPos = 0; //落在开始端

											//对方断为两个管子
											pipeLine.SplitWPipe(ptMid, dL, pPipeMaj);

											if (nPos == 1)
												vtMin.negate();

											//改变this管子的位置
											pEnt2->close();

											AcGePoint3d ptGe = ptMid + dS * vtMin;
											pipeLine.ModifyWPipe(ptGe, id2, nPos);

											pipeLine.AddTee(pPipeMaj, dL, ptMid, dS, vtMin);
											pEnt1->close();

											return;
										}
										else
										{
											acutPrintf(_T("\n选择的两桥架高度不等,不能创建三通!"));
										}
									}
								}
								else
								{
									acutPrintf(_T("\n选择的水平的两桥架标高不等,不能创建三通!"));
								}
							}
							else //各种垂直三通
							{
								//acutPrintf(_T("\n各种垂直三通..."));
								//并且交面有效
								AddUserinfTee(pPipeMaj, pPipeMin,vtMaj,vtMin);
							}
						}
						pEnt2->close();
					}
				}
				pEnt1->close();
			}
		}
	}
}

void ModifyStartOrEnd(AecDbECableTray *pPipe,AcGePoint3d& ptMid, double dL, AcGeVector3d& vtMaj)
{
	double dDis1 = pPipe->StartPoint().distanceTo(ptMid);
	double dDis2 = pPipe->EndPoint().distanceTo(ptMid);

	AcGeVector3d vt = pPipe->EndPoint() - pPipe->StartPoint();
	vt.normalize();

	AcGePoint3d pt;
	if (dDis1 < dDis2)//靠近Start
	{
		pt = ptMid + vt * dL;
		pPipe->SetStartPoint(pt);
		vtMaj = vt;
	}
	else//靠近End
	{
		pt = ptMid - vt * dL;
		pPipe->SetEndPoint(pt);
		vtMaj = vt;
		vtMaj.negate();
	}
}

void ModifyStartOrEnd(AecDbECableTray *pPipe, AcGePoint3d& ptMid, AcGeVector3d& vtDir, double dL)
{
	AcGePlane plan;
	plan.set(ptMid, vtDir);

	AcGePoint3d pt1 = plan.closestPointTo(pPipe->StartPoint());
	AcGePoint3d pt2 = plan.closestPointTo(pPipe->EndPoint());

	double dDis1 = pPipe->StartPoint().distanceTo(pt1);
	double dDis2 = pPipe->EndPoint().distanceTo(pt2);

	AcGeVector3d vt = pPipe->EndPoint() - pPipe->StartPoint();
	vt.normalize();

	AcGePoint3d pt;
	if (dDis1 < dDis2)//靠近Start
	{
		pt = pt1 + vt * dL;
		pPipe->SetStartPoint(pt);
	}
	else//靠近End
	{
		pt = pt2 - vt * dL;
		pPipe->SetEndPoint(pt);
	}
}

void AddUserinfTee(AcDbObjectId& id1, AcDbObjectId& id2, AcDbObjectId& id3)
{
	AecHvac::DuctParam param1, param2, param3;
	memset(&param1, 0, sizeof(AecHvac::DuctParam));
	memset(&param2, 0, sizeof(AecHvac::DuctParam));
	memset(&param3, 0, sizeof(AecHvac::DuctParam));

	AcDbEntity *pEnt1 = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
	{
		AecDbECableTray *pPipe1 = AecDbECableTray::cast(pEnt1);
		if (pPipe1 != NULL)
		{
			pPipe1->GetDuctParam(param1);

			AcDbEntity *pEnt2 = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
			{
				AecDbECableTray *pPipe2 = AecDbECableTray::cast(pEnt2);
				if (pPipe2 != NULL)
				{
					pPipe2->GetDuctParam(param2);
					
					AcDbEntity *pEnt3 = NULL;
					if (Acad::eOk == acdbOpenAcDbEntity(pEnt3, id3, AcDb::kForWrite))
					{
						AecDbECableTray *pPipe3 = AecDbECableTray::cast(pEnt3);
						if (pPipe3 != NULL)
						{
							pPipe3->GetDuctParam(param3);
							
							AcGeLine3d ln1(pPipe1->StartPoint(), pPipe1->EndPoint());
							AcGeLine3d ln2(pPipe2->StartPoint(), pPipe2->EndPoint());

							KTTempTol tol(1.e-3);
							AcGePoint3d ptMid;
							if (!ln1.intersectWith(ln2, ptMid))
							{
								pEnt1->close();
								pEnt2->close();
								pEnt3->close();
								acutPrintf(_T("\n水平的两桥架不相交!"));
								return;
							}

							AecDbECableJig jig;
							AecDbECableLine pipeLine(&jig);
							pipeLine.SetPipeParam(&param1);

							double dL = GetElbowL(&param1);
							double dLx = GetElbowLx(&param1);

							AcDbVoidPtrArray arEntPtrs, arReslt;
							pPipe3->GetDraw2dables(0, arEntPtrs);

							AcDbCurve *pCurve = KTCADUtilityEx::ConvertBoundCurve(arEntPtrs, arReslt);
							if (pCurve != NULL)
							{
								AcDbPolyline *pPl = AcDbPolyline::cast(pCurve);
								if (pPl != NULL)
								{
									//取其中4个角点
									AecUserInterface uinf;
									id3.handle().getIntoAsciiBuffer(uinf.szNo);
									_tcscpy(uinf.szSys, param3.szSys);
									uinf.vtDir = pPipe3->EndPoint() - pPipe3->StartPoint();
									uinf.vtDir.normalize();

									AcGePoint3d ptS, ptE, ptM, ptTmp;
									ptE = pPipe3->EndPoint();
									ptS = pPipe3->StartPoint();
									ptM = MidPoint(ptS, ptE);
									pPipe1->getClosestPointTo(ptM, ptTmp);

									AcGeVector3d vtTmp = ptM - ptTmp;
									if (vtTmp.dotProduct(uinf.vtDir) < 0)
									{
										uinf.vtDir.negate();
									}
									uinf.vtDir.normalize();

									//XY 面
									if (pPl->numVerts() >= 4)
									{
										uinf.nPoints = 5;
										for (int i = 0; i < 4; i++)
										{
											pPl->getPointAt(i, uinf.ptGe[i]);
										}
										uinf.ptGe[4] = uinf.ptGe[0];

										AcGeVector3d vtZ(0, 0, 1);
										vtZ *= param1.m_dEl;

										for (int i = 0; i < 5; i++)
										{
											uinf.ptGe[i] += vtZ;//到cen线

											//到面
											uinf.ptGe[i] += uinf.vtDir * 0.5 * param1.dSize[1];
										}
									}

									AecDbECableJig jig;
									AecDbECableLine pipeLine(&jig);
									pipeLine.SetPipeParam(&param1);
									double dL = GetElbowL(&param1);
									double dLx = GetElbowLx(&param1);

									AcGeVector3d vtMaj, vtMin;

									//改变pipe1,pipe2
									ModifyStartOrEnd(pPipe1, ptMid, dL + dLx, vtMaj);
									ModifyStartOrEnd(pPipe2, ptMid, dL + dLx, vtMin);

									uinf.vtDir.normalize();
									uinf.vtDir *= (dL + dLx);

									vtMaj.normalize(); vtMin.normalize();

									AcGePoint3d ptUinf = ptMid;
									AcGeVector3d vtUinf = uinf.vtDir;
									vtUinf.normalize();
									ptUinf += vtUinf * 0.5 * param1.dSize[1];
									ModifyStartOrEnd(pPipe3, ptUinf, uinf.vtDir, dL + dLx);

									pipeLine.AddTee5(ptMid, dL, vtMaj, vtMin,uinf);
								}
							}
							else
							{
								pEnt1->close();
								pEnt2->close();
								pEnt3->close();
								acutPrintf(_T("\n垂直桥架投影有获取失败!"));
								return;
							}
						}
						pEnt3->close();
					}
				}
				pEnt2->close();
			}
		}
		pEnt1->close();
	}
}

//垂直三角三通
void EL_SJ3TCmdFnc()
{
	ads_name ent1, ent2,ent3;
	//平面 两垂直桥架+ Z向垂直桥架
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择水平桥架1:"), ent1, pRb);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n选择水平桥架2:"), ent2, pRb);
		if (nRes == RTNORM)
		{
			nRes = CKTCadUtility::SelectEntity(_T("\n选择垂直桥架3:"), ent3, pRb);
			if (nRes == RTNORM)
			{
				AcDbObjectId id1, id2, id3;
				acdbGetObjectId(id1, ent1);
				acdbGetObjectId(id2, ent2);
				acdbGetObjectId(id3, ent3);

				AecHvac::DuctParam param1,param2,param3;
				memset(&param1, 0, sizeof(AecHvac::DuctParam));
				memset(&param2, 0, sizeof(AecHvac::DuctParam));
				memset(&param3, 0, sizeof(AecHvac::DuctParam));

				AcGeVector3d vt1, vt2, vt3;

				AcDbEntity *pEnt1 = NULL;
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForRead))
				{
					AecDbECableTray *pPipe1 = AecDbECableTray::cast(pEnt1);
					if (pPipe1 != NULL)
					{
						pPipe1->GetDuctParam(param1);
						vt1 = pPipe1->EndPoint() - pPipe1->StartPoint();
					}
					pEnt1->close();
				}

				AcDbEntity *pEnt2 = NULL;
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForRead))
				{
					AecDbECableTray *pPipe2 = AecDbECableTray::cast(pEnt2);
					if (pPipe2 != NULL)
					{
						pPipe2->GetDuctParam(param2);
						vt2 = pPipe2->EndPoint() - pPipe2->StartPoint();
					}
					pEnt2->close();
				}

				AcDbEntity *pEnt3 = NULL;
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt3, id3, AcDb::kForRead))
				{
					AecDbECableTray *pPipe3 = AecDbECableTray::cast(pEnt3);
					if (pPipe3 != NULL)
					{
						pPipe3->GetDuctParam(param3);
						vt3 = pPipe3->EndPoint() - pPipe3->StartPoint();
					}
					pEnt3->close();
				}

				//param1=param2!=param3 参数相等
				//
				if (fabs(param1.dSize[0] - param2.dSize[0]) < 1.e-1 &&
					fabs(param1.dSize[1] - param2.dSize[1]) < 1.e-1)
				{
					//...
				}
				else
				{
					acutPrintf(_T("\n选择的桥架1,2 参数不等!"));
					return;
				}

				AcGeLine3d ln1(AcGePoint3d::kOrigin, vt1);
				AcGeLine3d ln2(AcGePoint3d::kOrigin, vt2);
				if (vt3.isParallelTo(AcGeVector3d::kZAxis))
				{
					//
				}
				else
				{
					//...
					acutPrintf(_T("\n选择的桥架3 不是Z向桥架!"));
					return;
				}

				if ( ln1.isParallelTo(AcGePlane::kXYPlane) &&
					 ln2.isParallelTo(AcGePlane::kXYPlane))
				{
					AddUserinfTee(id1,id2,id3);
				}
				else
				{
					//...
					acutPrintf(_T("\n选择的桥架1,2 不是水平桥架!"));
					return;
				}
			}
		}
	}
	acutRelRb(pRb);
}

//添加四通
void EL_TJ4TCmdFnc()
{
	ads_name ent1, ent2;

	struct resbuf* pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择主桥架:"), ent1, pRb, NULL);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n选择支桥架:"), ent2, pRb, NULL);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1;
			acdbGetObjectId(id1, ent1);

			AcDbObjectId id2;
			acdbGetObjectId(id2, ent2);

			AcDbEntity* pEnt1 = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				AecDbECableTray* pPipeMaj = AecDbECableTray::cast(pEnt1);
				if (pPipeMaj != NULL)
				{
					AcDbEntity* pEnt2 = NULL;
					if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
					{
						AecDbECableTray* pPipeMin = AecDbECableTray::cast(pEnt2);
						if (pPipeMin != NULL)
						{

							AcGeLine3d ln1(pPipeMaj->StartPoint(), pPipeMaj->EndPoint());
							AcGeLine3d ln2(pPipeMin->StartPoint(), pPipeMin->EndPoint());

							AcGeVector3d vtMaj = pPipeMaj->EndPoint() - pPipeMaj->StartPoint();
							AcGeVector3d vtMin = pPipeMin->EndPoint() - pPipeMin->StartPoint();
							vtMaj.normalize();
							vtMin.normalize();

							if (!vtMaj.isPerpendicularTo(vtMin))
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的两桥架不垂直,无法加四通连结!请选择相互垂直的桥架!"));
								return;
							}

							AcGePoint3d ptMid, ptTemp1, ptTemp2;
							if (ln1.intersectWith(ln2, ptMid)) //相交
							{
								AecHvac::DuctParam param1, param2;
								memset(&param1,0,sizeof(AecHvac::DuctParam));
								memset(&param2,0,sizeof(AecHvac::DuctParam));

								pPipeMaj->GetDuctParam(param1);
								pPipeMin->GetDuctParam(param2);

								if (param1.m_app != param2.m_app)
								{
									pEnt1->close();
									pEnt2->close();
									acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以四通连接!"));
									return;
								}

								AecHvac::DuctParam paramMaj,paramMin;
								if (param1.dSize[0] > param2.dSize[0])
								{
									memcpy(&paramMaj,&param1,sizeof(AecHvac::DuctParam));
									memcpy(&paramMin,&param2,sizeof(AecHvac::DuctParam));
								}
								else
								{
									memcpy(&paramMaj,&param2,sizeof(AecHvac::DuctParam));
									memcpy(&paramMin,&param1,sizeof(AecHvac::DuctParam));
								}

								if ( fabs(param1.dSize[1] - param2.dSize[1]) < 1.e-3)
								{
									AecDbECableJig jig;
									AecDbECableLine pipeLine(&jig);
									pipeLine.SetPipeParam(&paramMin);

									pEnt1->close();
									pEnt2->close();
									pipeLine.AddCross(id1, ptMid, id2);

									return;
								}
								else
								{
									acutPrintf(_T("\n选择的两桥架高度不同,不能创建四通!"));
								}
							}
						}
						pEnt2->close();
					}
				}
				pEnt1->close();
			}
		}
	}
}

//添加弯头
void EL_TJWTCmdFnc()
{
	//选择管线末点加弯头
	ads_name ent;
	ads_point pt;

	KTCADSysVar<int> var(_T("orthomode"), 1);

	int nRes = acedEntSel(_T("\n选择桥架末端添加弯头:"), ent, pt);
	if (nRes == RTNORM)
	{
		AcDbObjectId id;
		acdbGetObjectId(id, ent);

		AcDbEntity* pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
		{
			AecDbECableTray* pPipe = AecDbECableTray::cast(pEnt);
			if (pPipe != NULL)
			{
				ads_point ptw;
				acdbUcs2Wcs(pt, ptw, false);
				AcGePoint3d ptGe = asPnt3d(ptw);

				double dDis1 = ptGe.distanceTo(pPipe->StartPoint());
				double dDis2 = ptGe.distanceTo(pPipe->EndPoint());

				AcGeVector3d vtMaj = pPipe->EndPoint() - pPipe->StartPoint();
				AcGePoint3d ptFrom = pPipe->EndPoint();
				if (dDis1 < dDis2) //靠近start
				{
					ptFrom = pPipe->StartPoint();
				}
				else
				{
					vtMaj.negate();
				}

				AecHvac::DuctParam param;
				memset(&param,0,sizeof(AecHvac::DuctParam));
				pPipe->GetDuctParam(param);

				vtMaj.normalize();

				acdbWcs2Ucs(asDblArray(ptFrom), pt, false);

				ads_point ptRes;
				AcGePoint3d ptEnd, ptMid;
				AcGeVector3d vtMin;

				acedInitGet(RSG_OTHER, _T("U D"));
				nRes = acedGetPoint(pt, _T("\n选择弯头的出口方向或另外桥架末端[向上(U)/向下(D)]:"), ptRes);
				if (nRes == RTNORM)
				{
					//判断是否落在其他管子上,且直径相同
					ads_name ss, ent;
					ads_point pt1, pt2;

					ads_point_set(ptRes, pt1);
					ads_point_set(ptRes, pt2);
					pt1[X] -= CoreTools::PixelToWcs(10);
					pt1[Y] -= CoreTools::PixelToWcs(10);
					pt2[X] += CoreTools::PixelToWcs(10);
					pt2[Y] += CoreTools::PixelToWcs(10);

					TCHAR szBuf[17];
					struct resbuf eb1;
					eb1.restype = 0;
					_tcscpy(szBuf, DXF_PIPE);
					eb1.resval.rstring = szBuf;
					eb1.rbnext = NULL;

					acedSSGet(_T("C"), pt1, pt2, &eb1, ss);
					Adesk::Int32 lLen = 0;
					acedSSLength(ss, &lLen);

					BOOL bHitPipeok = FALSE;
					if (lLen > 0)
					{
						acedSSName(ss, 0, ent);
						acedSSFree(ss);

						AcDbObjectId id2;
						acdbGetObjectId(id2, ent);
						AcDbEntity* pEnt2 = NULL;

						if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
						{
							AecDbECableTray* pWPipe = AecDbECableTray::cast(pEnt2);
							if (pWPipe != NULL)
							{
								AecHvac::DuctParam param2;
								memset(&param2,0,sizeof(AecHvac::DuctParam));
								pWPipe->GetDuctParam(param2);


								if ((int)param2.dSize[0] == (int)param.dSize[0])
								{
									AcGeLine3d ln1(pPipe->StartPoint(), pPipe->EndPoint());
									AcGeLine3d ln2(pWPipe->StartPoint(), pWPipe->EndPoint());
									if (ln2.intersectWith(ln1, ptMid))
									{
										//找距离ptmid最远的
										int nDir1 = 1;//
										vtMaj = ptMid - pPipe->StartPoint();
										double dDis1 = ptMid.distanceTo(pPipe->StartPoint());
										double dDis2 = ptMid.distanceTo(pPipe->EndPoint());
										if (dDis1 - dDis2 < 1.e-10)//距离end远,修改Start
										{
											vtMaj = ptMid - pPipe->EndPoint();
											nDir1 = 0;
										}
										vtMaj.normalize();

										//找距离ptmid最远的
										int nDir2 = 1;//
										vtMin = ptMid - pWPipe->StartPoint();
										dDis1 = ptMid.distanceTo(pWPipe->StartPoint());
										dDis2 = ptMid.distanceTo(pWPipe->EndPoint());
										if (dDis1 - dDis2 < 1.e-10)//距离end远,修改Start
										{
											vtMin = ptMid - pWPipe->EndPoint();
											nDir2 = 0;
										}
										vtMin.normalize();
										vtMin.negate();

										AecDbECableJig jig;
										AecDbECableLine pipeline(&jig);
										pipeline.SetPipeParam(&param);
										AcDbObjectId idElbow = pipeline.CreateElbow(vtMaj, ptMid, vtMin, &param, TRUE);

										//延长两个管子
										pPipe->upgradeOpen();
										if (nDir1 == 0)
											pPipe->SetStartPoint(pipeline.m_intf0.ptPos);
										else
											pPipe->SetEndPoint(pipeline.m_intf0.ptPos);
										pPipe->downgradeOpen();

										if (nDir2 == 0)
											pWPipe->SetStartPoint(pipeline.m_intf1.ptPos);
										else
											pWPipe->SetEndPoint(pipeline.m_intf1.ptPos);

										bHitPipeok = TRUE;
										pEnt->close();
										pEnt2->close();
										return;
									}
								}
							}
							pEnt2->close();
						}
					}

					if (!bHitPipeok)
					{
						ads_point ptResw;
						acdbUcs2Wcs(ptRes, ptResw, false);
						ptEnd = asPnt3d(ptResw);
						vtMin = ptEnd - ptFrom;
						vtMin.normalize();
					}
				}
				else if (nRes == RTKWORD)
				{
					TCHAR szKey[3];
					acedGetInput(szKey);
					if (_tcsicmp(_T("U"), szKey) == 0)
					{
						vtMin = AcGeVector3d::kZAxis;
					}
					else if (_tcsicmp(_T("D"), szKey) == 0)
					{
						vtMin = -AcGeVector3d::kZAxis;
					}

					//2024-1-15
					//double dTmp = param.dSize[0];
					//param.dSize[0] = param.dSize[1];
					//param.dSize[1] = dTmp;
				}

				if (vtMin.isParallelTo(vtMaj))
				{
					acutPrintf(_T("\n弯头的出口方向不能和主方向平行!"));
					pEnt->close();
					return;
				}

				double dr = GetElbowL(&param);

				AcGeVector3d vtToCen = vtMin.orthoProject(vtMaj);
				vtToCen.normalize();
				AcGePoint3d ptCen = ptFrom + dr * vtToCen;

				double dAng = vtMin.angleTo(vtMaj);//0-180
				double dDot = vtMin.dotProduct(vtMaj);
				if (dDot < -1.e-10 && dAng - PI / 2.0 < 1.e-10)
				{
					dAng = PI - dAng;
				}

				if (dAng - PI / 2.0 > 1.e-6)
				{
					acutPrintf(_T("弯头中心角度必须不大于90度"));
					pEnt->close();
					return;
				}

				if (dAng - PI < 1.e-10)
					dAng = PI - dAng;

				double dCord = dr * cos((PI - dAng) / 2.0);
				AcGeVector3d vtCord = vtMaj + vtMin;
				vtCord.normalize();
				ptMid = ptCen - vtCord * dCord;
				AcGeVector3d vtToM = ptMid - ptCen;
				vtToM.normalize();

				ptMid = ptCen + dr / cos((PI - dAng) / 2.0) * vtToM;

				AecDbECableJig jig;
				AecDbECableLine pipeline(&jig);
				pipeline.SetPipeParam(&param);
				pipeline.CreateElbow(vtMaj, ptMid, vtMin, &param, TRUE);
			}
			else
			{
				acutPrintf(_T("\n选择的实体不是管线!"));
			}
			pEnt->close();
		}
	}
}

//弯头连接
void EL_WTLJCmdFnc()
{
	//选择管线末点加弯头
	ads_name ent1, ent2;
	struct resbuf* pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n在桥架末端选择桥架1:"), ent1, pRb);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n在桥架末端选择桥架2:"), ent2, pRb);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1, id2;
			acdbGetObjectId(id1, ent1);
			acdbGetObjectId(id2, ent2);

			AcDbEntity* pEnt1 = NULL;
			AcDbEntity* pEnt2 = NULL;

			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
				{
					AecDbECableTray* pPipe1 = AecDbECableTray::cast(pEnt1);
					AecDbECableTray* pPipe2 = AecDbECableTray::cast(pEnt2);

					if (pPipe1 != NULL && pPipe2 != NULL)
					{
						AcGeVector3d vtDir1 = pPipe1->EndPoint() - pPipe1->StartPoint();
						AcGeVector3d vtDir2 = pPipe2->EndPoint() - pPipe2->StartPoint();

						if (vtDir1.isParallelTo(vtDir2))
						{
							pEnt1->close();
							pEnt2->close();
							acutPrintf(_T("\n选择的两根桥架平行,不能加弯头连接!"));
							return;
						}

						AecHvac::DuctParam param1, param2;
						memset(&param1,0,sizeof(AecHvac::DuctParam));
						memset(&param2,0,sizeof(AecHvac::DuctParam));

						pPipe1->GetDuctParam(param1);
						pPipe2->GetDuctParam(param2);

						if (param1.m_app != param2.m_app)
						{
							pEnt1->close();
							pEnt2->close();
							acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以弯头连接!"));
							return;
						}

						/*if ((int)param1.dSize[0] != (int)param2.dSize[0])
						{
							pEnt1->close();
							pEnt2->close();
							acutPrintf(_T("\n选择的两根桥架主尺寸不相同,不能加弯头连接!"));
							return;
						}*/

						//判断点在位置
						AcGeLine3d ln1(pPipe1->StartPoint(), pPipe1->EndPoint());
						AcGeLine3d ln2(pPipe2->StartPoint(), pPipe2->EndPoint());

						AcGePoint3d ptMid;
						if (ln1.intersectWith(ln2, ptMid) == Adesk::kTrue)
						{
							pEnt1->close();
							pEnt2->close();

							AecDbECableJig jig;
							AecDbECableLine pipeLine(&jig);
							pipeLine.SetPipeParam(&param2);
							pipeLine.PushPipeParam();
							pipeLine.AddElbow(id1, ptMid, id2);

							return;
						}
						else
						{
							acutPrintf(_T("\n两桥架底不能延长相交,不能弯头连接!"));
						}
					}
					pEnt2->close();
				}
				pEnt1->close();
			}
		}
	}
}

AcGeVector3d GetLineInfDir(const AcGePoint3d& ptSta,const AcGePoint3d& ptEnd,const AcGePoint3d& ptHit)
{
	double dDis1 = ptHit.distanceTo(ptSta);
	double dDis2 = ptHit.distanceTo(ptEnd);

	AcGeVector3d vt = ptEnd - ptSta;
	if (dDis1 < dDis2)//sta
	{
		vt.negate();
	}
	return vt;
}

void ModifyECableTray(AecDbECableTray* pPipe,AecInterface& inf)
{
	AcGePoint3d ptSta = pPipe->StartPoint();
	AcGePoint3d ptEnd = pPipe->EndPoint();

	double dDis1 = inf.ptPos.distanceTo(ptSta);
	double dDis2 = inf.ptPos.distanceTo(ptEnd);

	if (dDis1 < dDis2)//sta
	{
		pPipe->SetStartPoint(inf.ptPos);
	}
	else
	{
		pPipe->SetEndPoint(inf.ptPos);
	}
}

//添加乙字弯
void EL_TJZWCmdFnc()
{
	//选择管线末点加弯头
	ads_point pt1,pt2;
	ads_name ent1, ent2;
	struct resbuf* pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n请在桥架末端选择平行桥架1:"), ent1, pRb,pt1);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n请在桥架末端选择平行桥架2:"), ent2, pRb,pt2);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1, id2;
			acdbGetObjectId(id1, ent1);
			acdbGetObjectId(id2, ent2);

			ads_point pt11,pt22;
			acdbUcs2Wcs(pt1,pt11,false);
			acdbUcs2Wcs(pt2,pt22,false);

			AcDbEntity* pEnt1 = NULL;
			AcDbEntity* pEnt2 = NULL;

			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
				{
					AecDbECableTray* pPipe1 = AecDbECableTray::cast(pEnt1);
					AecDbECableTray* pPipe2 = AecDbECableTray::cast(pEnt2);

					if (pPipe1 != NULL && pPipe2 != NULL)
					{
						AcGeVector3d vtDir1 = pPipe1->EndPoint() - pPipe1->StartPoint();
						AcGeVector3d vtDir2 = pPipe2->EndPoint() - pPipe2->StartPoint();

						AcGePoint3d pt111,pt222;
						pPipe1->getClosestPointTo(asPnt3d(pt11),pt111,Adesk::kTrue);
						pPipe2->getClosestPointTo(asPnt3d(pt22),pt222,Adesk::kTrue);

						AcGePoint3d ptMid = MidPoint(pt111,pt222);

						if (vtDir1.isParallelTo(vtDir2))//平行
						{
							AecHvac::DuctParam param1, param2;
							memset(&param1,0,sizeof(AecHvac::DuctParam));
							memset(&param2,0,sizeof(AecHvac::DuctParam));

							pPipe1->GetDuctParam(param1);
							pPipe2->GetDuctParam(param2);

							if (param1.m_app != param2.m_app)
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以乙字弯连接!"));
								return;
							}

							if ((int)param1.dSize[0] != (int)param2.dSize[0] )
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的两根桥架主尺寸不相同,不能加乙字弯连接!"));
								return;
							}

							if ((int)param1.dSize[1] != (int)param2.dSize[1] )
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的两根桥架主尺寸不相同,不能加乙字弯连接!"));
								return;
							}

							//判断是否共面 XY 或立面叠加
							if ( fabs(param1.m_dEl - param2.m_dEl) < 1.e-10)//等标高
							{
								/*
								m_mapSpecXData.GetAt(KEY_MAJBR, vtMaj);//进口方向
								m_mapSpecXData.GetAt(KEY_MINBR, vtMin);//出口方向
								m_mapSpecXData.GetAt(KEY_OFFSETDIR,vtOffset);//偏移方向
								//vtMaj == vtMin

								m_mapSpecXData.GetAt(KEY_NORMAL,vtNorm);
								m_mapSpecXData.GetAt(KEY_MID, ptMid);//中间点
								m_mapSpecXData.GetAt(KEY_Offset,dOffsetH);

								m_mapSpecXData.GetAt(HELB_RadRatio, dRatio);
								m_mapSpecXData.GetAt(PIPE_ELBOWANG,dSweepAngle);
								m_mapSpecXData.GetAt(PIPE_THICK, dThick);
								m_mapSpecXData.GetAt(HELB_LX, dLx);//直边长度
								*/

								//是否  不共线
								AcGePoint3d pt2;
								pPipe1->getClosestPointTo(pPipe2->EndPoint(),pt2,Adesk::kTrue);

								AcGeVector3d vt = pt2 - pPipe2->EndPoint();
								if (!vt.isZeroLength())//平面 不共线
								{
									if (!vtDir1.isCodirectionalTo(vtDir2))
										vtDir2.negate();
									
									AcGeVector3d vtOffset = vt;
									vtOffset.negate();

									CAcModuleResourceOverride myResources;
									COffSetDlg dlg;
									dlg.m_dOffsetH = vt.length();
									if (IDOK == dlg.DoModal() )
									{
										AecDbEcFitting* pFit = new AecDbEcFitting;

										AecDbObjXDataMap* pXDataMap = pFit->GetSpecialtyData(AcDb::kForWrite);

										pFit->SetDuctParam(param1);

										vtDir1 = GetLineInfDir(pPipe1->StartPoint(),pPipe1->EndPoint(),asPnt3d(pt11));
										vtDir2 = GetLineInfDir(pPipe2->StartPoint(),pPipe2->EndPoint(),asPnt3d(pt22));
										vtDir2.negate();

										pXDataMap->SetAt(KEY_RUNTIME,eOffset);
										pXDataMap->SetAt(KEY_MAJBR, vtDir1);
										pXDataMap->SetAt(KEY_MINBR, vtDir2);
										pXDataMap->SetAt(KEY_OFFSETDIR,vtOffset);
										pXDataMap->SetAt(KEY_MID,ptMid);
										pXDataMap->SetAt(KEY_NORMAL,AcGeVector3d::kZAxis);
										pXDataMap->SetAt(KEY_Offset,dlg.m_dOffsetH);

										pXDataMap->SetAt(HELB_RadRatio, param1.m_dRatio);
										pXDataMap->SetAt(PIPE_ELBOWANG,dlg.m_dAngle);

										pXDataMap->SetAt(PIPE_THICK, param1.dSize[2]);
										pXDataMap->SetAt(HELB_LX,50.0);
										pXDataMap->SetAt(KEY_CENNODRAW,!param1.m_bCenDraw);

										AecInterface inf0,inf1;
										pFit->GetInterface(0,inf0);
										pFit->GetInterface(1,inf1);

										//修改桥架的位置
										ModifyECableTray(pPipe1,inf0);
										ModifyECableTray(pPipe2,inf1);

										//设置图层
										//设置图层
										AecHvac::DuctParam *pParam = &param1;
										AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, pParam->szSys, 4, _T("center2"), NULL);
										AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, pParam->szSys, nColor, _T("Continuous"), NULL);
										AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, pParam->szSys, 7, _T("Continuous"), NULL);

										pFit->setLayer(idOutLay);
										pFit->SetDoubleLayer(idOutLay);
										pFit->SetCenterLayer(idCenLay);
										pFit->SetCenterLayer(idCenLay);

										AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
									}
								}
							}
							else
							{
								//叠加
								AcGePoint3d pt2;
								pPipe1->getClosestPointTo(pPipe2->EndPoint(),pt2,Adesk::kTrue);
								AcGeVector3d vt = pt2 - pPipe2->EndPoint();
							
								AcGeTol tol;
								tol.setEqualVector(1.e-3);
								tol.setEqualPoint(1.e-3);
								if (vt.isParallelTo(AcGeVector3d::kZAxis,tol))
								{
									CAcModuleResourceOverride myResources;
									COffSetDlg dlg;
									dlg.m_dOffsetH = vt.length();
									if (IDOK == dlg.DoModal() )
									{
										AcGeVector3d vtOffset = vt;
										vtOffset.negate();

										AcGeVector3d vtNorm = vtDir1;
										vtNorm.rotateBy(PI/2.0,AcGeVector3d::kZAxis);
										
										AecDbEcFitting* pFit = new AecDbEcFitting;
										AecDbObjXDataMap* pXDataMap = pFit->GetSpecialtyData(AcDb::kForWrite);

										pFit->SetDuctParam(param1);

										vtDir1 = GetLineInfDir(pPipe1->StartPoint(),pPipe1->EndPoint(),asPnt3d(pt11));
										vtDir2 = GetLineInfDir(pPipe2->StartPoint(),pPipe2->EndPoint(),asPnt3d(pt22));
										vtDir2.negate();

										pXDataMap->SetAt(KEY_RUNTIME,eOffset);
										pXDataMap->SetAt(KEY_MAJBR, vtDir1);
										pXDataMap->SetAt(KEY_MINBR, vtDir2);
										pXDataMap->SetAt(KEY_OFFSETDIR,vtOffset);
										pXDataMap->SetAt(KEY_MID,ptMid);
										pXDataMap->SetAt(KEY_NORMAL,vtNorm);
										pXDataMap->SetAt(KEY_Offset,dlg.m_dOffsetH);

										pXDataMap->SetAt(HELB_RadRatio, param1.m_dRatio);
										pXDataMap->SetAt(PIPE_ELBOWANG,dlg.m_dAngle);

										pXDataMap->SetAt(PIPE_THICK, param1.dSize[2]);
										pXDataMap->SetAt(HELB_LX,50.0);
										pXDataMap->SetAt(KEY_CENNODRAW,!param1.m_bCenDraw);

										AecInterface inf0,inf1;
										pFit->GetInterface(0,inf0);
										pFit->GetInterface(1,inf1);

										//修改桥架的位置
										ModifyECableTray(pPipe1,inf0);
										ModifyECableTray(pPipe2,inf1);

										//设置图层
										//设置图层
										AecHvac::DuctParam *pParam = &param1;
										AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, pParam->szSys, 4, _T("center2"), NULL);
										AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, pParam->szSys, nColor, _T("Continuous"), NULL);
										AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, pParam->szSys, 7, _T("Continuous"), NULL);

										pFit->setLayer(idOutLay);
										pFit->SetDoubleLayer(idOutLay);
										pFit->SetCenterLayer(idCenLay);
										pFit->SetCenterLayer(idCenLay);

										AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
									}
								}
								else
								{
									acutPrintf(_T("\n选择的两个桥架不在叠加方向!不可加乙字弯连接!"));
								}
							}
						}
						else
						{
							acutPrintf(_T("\n选择的两个桥架不平行!不可加乙字弯连接!"));
						}
					}
					pEnt2->close();
				}
				pEnt1->close();
			}
		}
	}
}

//桥架避让
void EL_QJBRCmdFnc()
{
	//在管子上选择起始位置

	ads_name ent1;
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE_ONLY, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n请选择要加U型避让的桥架:"), ent1, pRb);
	acutRelRb(pRb);

	if (nRes == RTNORM)
	{
		AcDbObjectId id1;
		acdbGetObjectId(id1, ent1);

		ads_point pt1, pt2;
		AcGePoint3d ptGe[4], ptT;
		bool bSet = false;
		AcGeVector3d vtPipe;
		AecHvac::DuctParam param;
		memset(&param, 0, sizeof(AecHvac::DuctParam));


		nRes = acedGetPoint(NULL, _T("\n在桥架上选择U型避让的起点:"), pt1);
		if (nRes == RTNORM)
		{
			nRes = acedGetPoint(pt1, _T("\n在桥架上选择U型避让的终点:"), pt2);
			if (nRes == RTNORM)
			{
				ads_point pt11, pt22;
				acdbUcs2Wcs(pt1, pt11, false);
				acdbUcs2Wcs(pt2, pt22, false);

				AcDbEntity *pEnt = NULL;
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id1, AcDb::kForRead))
				{
					AecDbECableTray *pPipe = AecDbECableTray::cast(pEnt);
					if (pPipe != NULL)
					{
						pPipe->GetDuctParam(param);
						if (param.m_app == WPipe::eTrench)
						{
							acutPrintf(_T("\n选择的实体是电缆沟,不可以避让!"));
							pEnt->close();
							return;
						}

						pPipe->getClosestPointTo(asPnt3d(pt11), ptGe[1]);
						pPipe->getClosestPointTo(asPnt3d(pt22), ptGe[2]);
						ptGe[0] = pPipe->StartPoint();
						ptGe[3] = pPipe->EndPoint();

						AcGeVector3d vt1 = ptGe[3] - ptGe[0];
						vt1.normalize();
						vtPipe = vt1;

						AcGeVector3d vt2 = ptGe[2] - ptGe[1];
						vt2.normalize();

						if (vt1.dotProduct(vt2) < 0)//方向相反
						{
							ptT = ptGe[1];
							ptGe[1] = ptGe[2];
							ptGe[2] = ptT;
						}
						bSet = true;
					}
					pEnt->close();
				}
			}
		}

		if (bSet)
		{
			AcGePoint3d ptMid = MidPoint(ptGe[1], ptGe[2]);
			AcGeLine3d ln;
			ln.set(ptMid, vtPipe);
			bool bUpDw = false;

			//默认
			AcGeVector3d vtDir = vtPipe.perpVector();

			if (ln.isParallelTo(AcGePlane::kXYPlane))
			{
				vtDir = AcGeVector3d::kZAxis;
				//bUpDw = true;
			}
			else
			{
				if (vtPipe.isParallelTo(AcGeVector3d::kZAxis))
					vtDir = AcGeVector3d::kXAxis;
			}

			ads_point ptm, ptmm;
			acdbWcs2Ucs(asDblArray(ptMid), ptm, false);

			TCHAR szTip[256];
			_tcscpy(szTip, _T("\n请拾取一点指定水平避让方向:"));

			if (bUpDw)
			{
				acedInitGet(RSG_OTHER, _T("U D"));
				_tcscpy(szTip, _T("\n请拾取一点指定避让方向[向上(U)/向下(D):"));
			}

			nRes = acedGetPoint(ptm, szTip, ptm);
			if (nRes == RTNORM)
			{
				acdbUcs2Wcs(ptm, ptmm, false);
				AcGeVector3d vt = asPnt3d(ptmm) - ptMid;
				vtDir = vt.orthoProject(vtPipe);
				vtDir.normalize();

				if (vtDir.isZeroLength())
				{
					acutPrintf(_T("\n当前避让方向零长度,方向无效!"));
					return;
				}
			}
			/*else if (nRes == RTKWORD)
			{
				TCHAR szKey[3];
				acedGetInput(szKey);
				if (_tcsicmp(_T("U"), szKey) == 0)
				{
					vtDir = AcGeVector3d::kZAxis;
				}
				else if (_tcsicmp(_T("D"), szKey) == 0)
				{
					vtDir = -AcGeVector3d::kZAxis;
				}
			}*/
			else
			{
				return;
			}


			//空间间距
			nRes = RTNORM;
			if (nRes == RTNORM)
			{
				double dSpace = 0;
				nRes = acedGetReal(_T("\n请输入避让以管线中心为基准的空间间距<1000>:"), &dSpace);
				if (nRes == RTNONE)
				{
					dSpace = 1000.0;
				}
				else if (nRes == RTCAN)
				{
					return;
				}

				vtDir *= dSpace;

				AcGePoint3dArray arPts;
				arPts.append(ptGe[0]);
				arPts.append(ptGe[1]);

				ptGe[1] += vtDir;
				arPts.append(ptGe[1]);

				ptGe[2] += vtDir;
				arPts.append(ptGe[2]);

				ptGe[2] -= vtDir;
				arPts.append(ptGe[2]);

				arPts.append(ptGe[3]);

				//设置回退记录
				SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("BE"), RTNONE);

				AcDbEntity *pEnt = NULL;
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id1, AcDb::kForWrite))
				{
					pEnt->erase();
					pEnt->close();
				}

				AecDbECableJig jig(&param);
				jig.DoItOnPath(WPipe::eBridge, arPts, true,false);

				CoreTools::refreshGraphics();

				SHacedCommand(RTSTR, _T("_undo"), RTSTR, _T("E"), RTNONE);
			}
		}
	}
}

//引线开口
void EL_YXKKCmdFnc()
{
	//桥架,桥架件 任意侧面开口 口大小 系统 方向

	ads_name ent1;
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE_FIT, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n请选择桥架或桥架付件:"), ent1, pRb);
	if (nRes == RTNORM)
	{
		AcDbObjectId id1;
		acdbGetObjectId(id1, ent1);

		AecHvac::DuctParam param;
		memset(&param, 0, sizeof(AecHvac::DuctParam));

		AcDbEntity *pEnt1 = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForRead))
		{
			AecDbECableTray *pETray = AecDbECableTray::cast(pEnt1);
			if (pETray != NULL)
			{
				pETray->GetDuctParam(param);
			}

			AecDbEcFitting *pEFit = AecDbEcFitting::cast(pEnt1);
			if (pEFit != NULL)
			{
				pEFit->GetDuctParam(param);
			}

			if (param.m_app == WPipe::eTrench)
			{
				acedAlert(_T("选择的实体是缆沟,不可以引线开口!"));
				pEnt1->close();
				return;
			}
			pEnt1->close();
		}

		if (param.m_app == WPipe::eBridge)//是桥架
		{
			//弹出界面,用户选择面和位置方向尺寸系统
			CAcModuleResourceOverride myResources;
			CYXKKDlg dlg;
			dlg.SetObject(id1);
			if (IDOK == dlg.DoModal())
			{
				AecUserInterface inf;
				dlg.GetUserInf(inf);

				if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
				{
					AecDbECableTray *pETray = AecDbECableTray::cast(pEnt1);
					if (pETray != NULL)
					{
						pETray->AddUserInterface(inf);
					}

					AecDbEcFitting *pEFit = AecDbEcFitting::cast(pEnt1);
					if (pEFit != NULL)
					{
						pEFit->AddUserInterface(inf);
					}
					pEnt1->close();
				}
			}
		}
	}
}

//绘制缆沟
void EL_HZLGCmdFnc_old()
{
	//和绘制水槽一致
	//添加相关属性
	CAcModuleResourceOverride myResources;
	CHDLGDlg dlg;
	if (IDOK == dlg.DoModal() )
	{
		DlgData data;
		AcArray<RegionAndEl> arRegEl;

		dlg.GetDLGData(data,arRegEl);

		AcPolylineJig wallJig;
		wallJig.InitStatusRecsForWall(0.0,0.0);

		if ( wallJig.DoIt() )
		{
			AcDbObjectId idLayerWall = KTSetting::InitLayer(_T("LAY_WALL"),true);
			AcDbObjectId idLayerSlab = KTSetting::InitLayer(_T("LAY_SLAB"),true);

			AcDbObjectId idRoadLn = wallJig.GetRoadAxisLineId();

			AcDbEntity* pEnt = NULL;
			if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,idRoadLn,AcDb::kForWrite))
			{
				AecDb3dRoadAxisLine* pRoad = AecDb3dRoadAxisLine::cast(pEnt);
				if (pRoad != NULL)
				{
					for (int i = 0;i < arRegEl.length();i++)
					{
						RegionAndEl& rel = arRegEl.at(i);

						if (rel.nType == 2)// 墙体
						{
							AcDbPolyline* pPl = pRoad->ConvertTo2dPline();
							if (pPl != NULL)
							{
								AcDbVoidPtrArray arOff;
								pPl->getOffsetCurves(rel.m_dX,arOff);
								if ( !arOff.isEmpty() )
								{
									delete pPl;
									AcDbCurve* pPlCrv = (AcDbCurve*)arOff.first();

									AcDbVoidPtrArray arCurPtrs;
									pPlCrv->explode(arCurPtrs);

									//去处0长度线
									double dEnd = 0.0,dEndL = 0.0;
									AcDbCurve* pCurveT = NULL;
									for (int n = 0;n < arCurPtrs.length();n++)
									{
										pCurveT = (AcDbCurve*)arCurPtrs.at(n);
										pCurveT->getEndParam(dEnd);
										pCurveT->getDistAtParam(dEnd,dEndL);
										if (dEndL < 1.e-2)
										{
											arCurPtrs.removeAt(n);
											n -= 1;
											delete pCurveT;
										}
									}

									//创建墙体
									CString sSubNo;
									AecDbXWall* pWall = NULL;
									for (int ii = 0;ii < arCurPtrs.length();ii++)
									{
										sSubNo.Format(_T("WALL-%d"),ii+1);

										pCurveT = (AcDbCurve*)arCurPtrs.at(ii);

										pWall = new AecDbXWall;
										pWall->SetBaseCurve(pCurveT);
										pWall->GetSpecialtyData()->SetAt(KEY_NO,sSubNo);
										pWall->GetSpecialtyData()->SetAt(KEY_MATERIAL,rel.m_szMat);
										pWall->SetWallData(rel.dSize[0],rel.dSize[1],rel.m_dZ - 0.5 * rel.dSize[1],kMid);
										pWall->setLayer(idLayerWall);

										CKTCadUtility::AddToBlockTableRecord(pWall);
										AcDbObjectId idNew = pWall->objectId();
										pWall->close();
									}
								}
								else
								{
									delete pPl;
								}
							}
						}
						else if (rel.nType == 1)//板
						{
							AcDbPolyline* pPl = pRoad->ConvertTo2dPline();
							if (pPl != NULL)
							{
								pPl->setElevation(rel.m_dZ);

								TCHAR szHand[33];
								idRoadLn.handle().getIntoAsciiBuffer(szHand);

								CString sNo;
								sNo.Format(_T("板_%s"),szHand);
								
								AecDbXSlab* pSlab = new AecDbXSlab;
								pSlab->SetSection(rel.dSize[0],rel.dSize[1],0.0);
								pSlab->setLayer(idLayerSlab);
								pSlab->SetBaseCurve(pPl);
								pSlab->GetSpecialtyData()->SetAt(KEY_2DSTYLE,2);

								pSlab->GetSpecialtyData()->SetAt(KEY_MATERIAL,rel.m_szMat);
								pSlab->GetSpecialtyData()->SetAt(KEY_NO,sNo);
								pSlab->SetHatch(_T("AR-CONC"),0.0,1.0);

								CKTCadUtility::AddToBlockTableRecord(pSlab);
								pSlab->close();
							}
						}

						//暂时不用
						//delete rel.pReg;
					}
				}
				pEnt->close();
			}
		}
	}
}

void EL_HZLGCmdFnc()
{
	AecDbECableJig jig;
	jig.DoIt(WPipe::eTrench);
}

//合并缆沟
void EL_HBLGCmdFnc()
{
	ads_name ss, ent1, ent2;
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);

	int nRes = CKTCadUtility::SelectEntities(_T("\n请框选两个平行共线同属性的电缆沟:"), ss, pRb);
	acutRelRb(pRb);

	if (RTNORM == nRes)
	{
		Adesk::Int32 nLen = 0;
		acedSSLength(ss, &nLen);

		if (nLen == 2)
		{
			AcDbObjectId id1, id2;

			acedSSName(ss, 0, ent1);
			acdbGetObjectId(id1, ent1);

			acedSSName(ss, 1, ent2);
			acdbGetObjectId(id2, ent2);

			AcDbEntity *pEnt1 = NULL;
			AcDbEntity *pEnt2 = NULL;

			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
				{
					AecDbECableTray *pDuct1 = AecDbECableTray::cast(pEnt1);
					AecDbECableTray *pDuct2 = AecDbECableTray::cast(pEnt2);

					if (pDuct1 != NULL && pDuct2 != NULL)
					{
						AcGeVector3d vt1 = pDuct1->GetTailDir();
						AcGeVector3d vt2 = pDuct2->GetTailDir();

						AecHvac::DuctParam data1, data2;
						memset(&data1, 0, sizeof(AecHvac::DuctParam));
						memset(&data2, 0, sizeof(AecHvac::DuctParam));

						pDuct1->GetDuctParam(data1);
						pDuct2->GetDuctParam(data2);

						if (vt1.isParallelTo(vt2) && //平行
							fabs(data1.m_dEl - data2.m_dEl) < 1.e-3 && //标高
							fabs(data1.dSize[0] - data2.dSize[0]) < 1.e-3 && //尺寸
							fabs(data1.dSize[1] - data2.dSize[1]) < 1.e-3)
						{
							AcGePoint3d ptS1 = pDuct1->StartPoint();
							AcGePoint3d ptE1 = pDuct1->EndPoint();

							AcGePoint3d ptS2 = pDuct2->StartPoint();
							AcGePoint3d ptE2 = pDuct2->EndPoint();

							AcGePoint3dArray arPts;
							arPts.append(ptS1);
							arPts.append(ptE1);

							if (arPts.find(ptS2) == -1)
								arPts.append(ptS2);

							if (arPts.find(ptE2) == -1)
								arPts.append(ptE2);

							AcDbLine ln(ptS1, ptE1);
							SortPoints(arPts, &ln);

							pDuct1->SetStartPoint(arPts.first());
							pDuct1->SetEndPoint(arPts.last());

							pDuct2->erase();
						}
						else
						{
							acutPrintf(_T("\n选择的两个电缆沟实体几何属性不一致!"));
						}
					}
					pEnt2->close();
				}
				pEnt1->close();
			}
		}
		else
		{
			acutPrintf(_T("\n必须选择两个电缆沟实体!"));
		}
	}
	acedSSFree(ss);
}

//三通贯通
void EL_STGTCmdFnc()
{
	ads_name ent1, ent2;

	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择主电缆沟:"), ent1, pRb);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n选择支电缆沟:"), ent2, pRb);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1;
			acdbGetObjectId(id1, ent1);

			AcDbObjectId id2;
			acdbGetObjectId(id2, ent2);

			AcDbEntity *pEnt1 = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				AecDbECableTray *pPipeMaj = AecDbECableTray::cast(pEnt1);
				if (pPipeMaj != NULL)
				{
					AcDbEntity *pEnt2 = NULL;
					if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
					{

						AecDbECableTray *pPipeMin = AecDbECableTray::cast(pEnt2);
						if (pPipeMin != NULL)
						{
							AcGeLine3d ln1(pPipeMaj->StartPoint(), pPipeMaj->EndPoint());
							AcGeLine3d ln2(pPipeMin->StartPoint(), pPipeMin->EndPoint());

							AcGePoint3d ptMid, ptTemp1, ptTemp2;
							if (ln1.intersectWith(ln2, ptMid)) //相交
							{
								AecHvac::DuctParam param2;
								memset(&param2, 0, sizeof(AecHvac::DuctParam));
								pPipeMaj->GetDuctParam(param2);

								AecHvac::DuctParam param1;
								memset(&param1, 0, sizeof(AecHvac::DuctParam));
								pPipeMin->GetDuctParam(param1);

								if (param1.m_app != param2.m_app)
								{
									pEnt1->close();
									pEnt2->close();
									acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以三通连接!"));
									return;
								}

								double dRatio = param2.m_dRatio;
								double dLx = GetElbowLx(&param2);
								double dL = GetElbowL(&param2);
								double dS = dL;

								AecDbECableJig jig;
								AecDbECableLine pipeLine(&jig);
								pipeLine.SetPipeParam(&param1);

								AcGeVector3d vtMaj = pPipeMaj->EndPoint() - pPipeMaj->StartPoint();
								AcGeVector3d vtMin = pPipeMin->EndPoint() - pPipeMin->StartPoint();
								vtMaj.normalize();
								vtMin.normalize();

								//也可能加弯头,ptMid的两头有一在管子外
								ptTemp1 = ptMid + vtMaj * dL;
								ptTemp2 = ptMid - vtMaj * dL;

								AcGeLineSeg3d lineGe(pPipeMaj->StartPoint(), pPipeMaj->EndPoint());
								BOOL bAddTee = TRUE;
								if (!lineGe.isOn(ptTemp1) || !lineGe.isOn(ptTemp2))
								{
									if (fabs(param1.dSize[0] - param2.dSize[0]) < 1.e-3) //==
									{
										pEnt1->close();
										pEnt2->close();

										bAddTee = FALSE;
										if (pipeLine.AddElbow(id1, ptMid, id2))
										{
										}
										return;
									}
									else// 只能加三通
									{
										bAddTee = TRUE;
									}
								}

								if (bAddTee)
								{
									if (fabs(param1.dSize[1] - param2.dSize[1]) < 1.e-3)
									{
										int nPos = 1;//落在末端附近
										double dDis1 = ptMid.distanceTo(pPipeMin->StartPoint());
										double dDis2 = ptMid.distanceTo(pPipeMin->EndPoint());
										if (dDis1 < dDis2)
											nPos = 0; //落在开始端

										//对方断为两个管子
										pipeLine.SplitWPipe(ptMid, dL, pPipeMaj);

										if (nPos == 1)
											vtMin.negate();

										//改变this管子的位置
										pEnt2->close();

										AcGePoint3d ptGe = ptMid + dS * vtMin;
										pipeLine.ModifyWPipe(ptGe, id2, nPos);

										pipeLine.AddTee(pPipeMaj, dL, ptMid, dS, vtMin);
										pEnt1->close();

										return;
									}
									else
									{
										acedAlert(_T("\n选择的两桥架高度不同,不能贯通!"));
									}
								}
							}
						}
						pEnt2->close();
					}
				}
				pEnt1->close();
			}
		}
	}
}

//四通贯通
void EL_4TGTCmdFnc()
{
	ads_name ent1, ent2;

	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n选择主电缆沟:"), ent1, pRb, NULL);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n选择支电缆沟:"), ent2, pRb, NULL);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1;
			acdbGetObjectId(id1, ent1);

			AcDbObjectId id2;
			acdbGetObjectId(id2, ent2);

			AcDbEntity *pEnt1 = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				AecDbECableTray *pPipeMaj = AecDbECableTray::cast(pEnt1);
				if (pPipeMaj != NULL)
				{
					AcDbEntity *pEnt2 = NULL;
					if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
					{
						AecDbECableTray *pPipeMin = AecDbECableTray::cast(pEnt2);
						if (pPipeMin != NULL)
						{

							AcGeLine3d ln1(pPipeMaj->StartPoint(), pPipeMaj->EndPoint());
							AcGeLine3d ln2(pPipeMin->StartPoint(), pPipeMin->EndPoint());

							AcGeVector3d vtMaj = pPipeMaj->EndPoint() - pPipeMaj->StartPoint();
							AcGeVector3d vtMin = pPipeMin->EndPoint() - pPipeMin->StartPoint();
							vtMaj.normalize();
							vtMin.normalize();

							if (!vtMaj.isPerpendicularTo(vtMin))
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的两桥架不垂直,无法加四通连结!请选择相互垂直的桥架!"));
								return;
							}

							AcGePoint3d ptMid, ptTemp1, ptTemp2;
							if (ln1.intersectWith(ln2, ptMid)) //相交
							{
								AecHvac::DuctParam param1, param2;
								memset(&param1, 0, sizeof(AecHvac::DuctParam));
								memset(&param2, 0, sizeof(AecHvac::DuctParam));

								pPipeMaj->GetDuctParam(param1);
								pPipeMin->GetDuctParam(param2);

								if (param1.m_app != param2.m_app)
								{
									pEnt1->close();
									pEnt2->close();
									acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以四通连接!"));
									return;
								}

								AecHvac::DuctParam paramMaj, paramMin;
								if (param1.dSize[0] > param2.dSize[0])
								{
									memcpy(&paramMaj, &param1, sizeof(AecHvac::DuctParam));
									memcpy(&paramMin, &param2, sizeof(AecHvac::DuctParam));
								}
								else
								{
									memcpy(&paramMaj, &param2, sizeof(AecHvac::DuctParam));
									memcpy(&paramMin, &param1, sizeof(AecHvac::DuctParam));
								}

								if (fabs(param1.dSize[1] - param2.dSize[1]) < 1.e-3)
								{
									AecDbECableJig jig;
									AecDbECableLine pipeLine(&jig);
									pipeLine.SetPipeParam(&paramMin);

									pEnt1->close();
									pEnt2->close();
									pipeLine.AddCross(id1, ptMid, id2);

									return;
								}
								else
								{
									acutPrintf(_T("\n选择的两桥架高度不同,不能创建四通!"));
								}
							}
						}
						pEnt2->close();
					}
				}
				pEnt1->close();
			}
		}
	}
}

//弯头贯通
void EL_WTGTCmdFnc()
{
	//选择管线末点加弯头
	ads_name ent1, ent2;
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n在电缆沟末端选择电缆沟1:"), ent1, pRb);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n在电缆沟末端选择电缆沟2:"), ent2, pRb);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1, id2;
			acdbGetObjectId(id1, ent1);
			acdbGetObjectId(id2, ent2);

			AcDbEntity *pEnt1 = NULL;
			AcDbEntity *pEnt2 = NULL;

			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
				{
					AecDbECableTray *pPipe1 = AecDbECableTray::cast(pEnt1);
					AecDbECableTray *pPipe2 = AecDbECableTray::cast(pEnt2);

					if (pPipe1 != NULL && pPipe2 != NULL)
					{
						AcGeVector3d vtDir1 = pPipe1->EndPoint() - pPipe1->StartPoint();
						AcGeVector3d vtDir2 = pPipe2->EndPoint() - pPipe2->StartPoint();

						if (vtDir1.isParallelTo(vtDir2))
						{
							pEnt1->close();
							pEnt2->close();
							acutPrintf(_T("\n选择的两根桥架平行,不能加弯头连接!"));
							return;
						}

						AecHvac::DuctParam param1, param2;
						memset(&param1, 0, sizeof(AecHvac::DuctParam));
						memset(&param2, 0, sizeof(AecHvac::DuctParam));

						pPipe1->GetDuctParam(param1);
						pPipe2->GetDuctParam(param2);

						if (param1.m_app != param2.m_app)
						{
							pEnt1->close();
							pEnt2->close();
							acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以弯头连接!"));
							return;
						}

						/*if ((int)param1.dSize[0] != (int)param2.dSize[0])
						{
							pEnt1->close();
							pEnt2->close();
							acutPrintf(_T("\n选择的两根桥架主尺寸不相同,不能加弯头连接!"));
							return;
						}*/

						//判断点在位置
						AcGeLine3d ln1(pPipe1->StartPoint(), pPipe1->EndPoint());
						AcGeLine3d ln2(pPipe2->StartPoint(), pPipe2->EndPoint());

						AcGePoint3d ptMid;
						if (ln1.intersectWith(ln2, ptMid) == Adesk::kTrue)
						{
							pEnt1->close();
							pEnt2->close();

							AecDbECableJig jig;
							AecDbECableLine pipeLine(&jig);
							pipeLine.SetPipeParam(&param2);
							pipeLine.PushPipeParam();
							pipeLine.AddElbow(id1, ptMid, id2);

							return;
						}
						else
						{
							acutPrintf(_T("\n选择的两电缆沟在延长线上不相交!请检查标高是否一致!"));
						}
					}
					pEnt2->close();
				}
				pEnt1->close();
			}
		}
	}
}

//单加弯头
void EL_DJWTCmdFnc()
{
	//选择管线末点加弯头
	ads_name ent;
	ads_point pt;

	KTCADSysVar<int> var(_T("orthomode"), 1);

	int nRes = acedEntSel(_T("\n选择电缆沟末端添加弯头:"), ent, pt);
	if (nRes == RTNORM)
	{
		AcDbObjectId id;
		acdbGetObjectId(id, ent);

		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
		{
			AecDbECableTray *pPipe = AecDbECableTray::cast(pEnt);
			if (pPipe != NULL)
			{
				ads_point ptw;
				acdbUcs2Wcs(pt, ptw, false);
				AcGePoint3d ptGe = asPnt3d(ptw);

				double dDis1 = ptGe.distanceTo(pPipe->StartPoint());
				double dDis2 = ptGe.distanceTo(pPipe->EndPoint());

				AcGeVector3d vtMaj = pPipe->EndPoint() - pPipe->StartPoint();
				AcGePoint3d ptFrom = pPipe->EndPoint();
				if (dDis1 < dDis2) //靠近start
				{
					ptFrom = pPipe->StartPoint();
				}
				else
				{
					vtMaj.negate();
				}

				AecHvac::DuctParam param;
				memset(&param, 0, sizeof(AecHvac::DuctParam));
				pPipe->GetDuctParam(param);

				vtMaj.normalize();

				acdbWcs2Ucs(asDblArray(ptFrom), pt, false);

				ads_point ptRes;
				AcGePoint3d ptEnd, ptMid;
				AcGeVector3d vtMin;

				acedInitGet(RSG_OTHER, _T("U D"));
				nRes = acedGetPoint(pt, _T("\n选择弯头的出口方向或另外电缆沟末端[向上(U)/向下(D)]:"), ptRes);
				if (nRes == RTNORM)
				{
					//判断是否落在其他管子上,且直径相同
					ads_name ss, ent;
					ads_point pt1, pt2;

					ads_point_set(ptRes, pt1);
					ads_point_set(ptRes, pt2);
					pt1[X] -= CoreTools::PixelToWcs(10);
					pt1[Y] -= CoreTools::PixelToWcs(10);
					pt2[X] += CoreTools::PixelToWcs(10);
					pt2[Y] += CoreTools::PixelToWcs(10);

					TCHAR szBuf[17];
					struct resbuf eb1;
					eb1.restype = 0;
					_tcscpy(szBuf, DXF_PIPE);
					eb1.resval.rstring = szBuf;
					eb1.rbnext = NULL;

					acedSSGet(_T("C"), pt1, pt2, &eb1, ss);
					Adesk::Int32 lLen = 0;
					acedSSLength(ss, &lLen);

					BOOL bHitPipeok = FALSE;
					if (lLen > 0)
					{
						acedSSName(ss, 0, ent);
						acedSSFree(ss);

						AcDbObjectId id2;
						acdbGetObjectId(id2, ent);
						AcDbEntity *pEnt2 = NULL;

						if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
						{
							AecDbECableTray *pWPipe = AecDbECableTray::cast(pEnt2);
							if (pWPipe != NULL)
							{
								AecHvac::DuctParam param2;
								memset(&param2, 0, sizeof(AecHvac::DuctParam));
								pWPipe->GetDuctParam(param2);


								if ((int)param2.dSize[0] == (int)param.dSize[0])
								{
									AcGeLine3d ln1(pPipe->StartPoint(), pPipe->EndPoint());
									AcGeLine3d ln2(pWPipe->StartPoint(), pWPipe->EndPoint());
									if (ln2.intersectWith(ln1, ptMid))
									{
										//找距离ptmid最远的
										int nDir1 = 1;//
										vtMaj = ptMid - pPipe->StartPoint();
										double dDis1 = ptMid.distanceTo(pPipe->StartPoint());
										double dDis2 = ptMid.distanceTo(pPipe->EndPoint());
										if (dDis1 - dDis2 < 1.e-10)//距离end远,修改Start
										{
											vtMaj = ptMid - pPipe->EndPoint();
											nDir1 = 0;
										}
										vtMaj.normalize();

										//找距离ptmid最远的
										int nDir2 = 1;//
										vtMin = ptMid - pWPipe->StartPoint();
										dDis1 = ptMid.distanceTo(pWPipe->StartPoint());
										dDis2 = ptMid.distanceTo(pWPipe->EndPoint());
										if (dDis1 - dDis2 < 1.e-10)//距离end远,修改Start
										{
											vtMin = ptMid - pWPipe->EndPoint();
											nDir2 = 0;
										}
										vtMin.normalize();
										vtMin.negate();

										AecDbECableJig jig;
										AecDbECableLine pipeline(&jig);
										pipeline.SetPipeParam(&param);
										AcDbObjectId idElbow = pipeline.CreateElbow(vtMaj, ptMid, vtMin, &param, TRUE);

										//延长两个管子
										//pPipe->upgradeOpen();
										if (nDir1 == 0)
											pPipe->SetStartPoint(pipeline.m_intf0.ptPos);
										else
											pPipe->SetEndPoint(pipeline.m_intf0.ptPos);
										//pPipe->downgradeOpen();

										if (nDir2 == 0)
											pWPipe->SetStartPoint(pipeline.m_intf1.ptPos);
										else
											pWPipe->SetEndPoint(pipeline.m_intf1.ptPos);

										bHitPipeok = TRUE;
										pEnt->close();
										pEnt2->close();
										return;
									}
								}
							}
							pEnt2->close();
						}
					}

					if (!bHitPipeok)
					{
						ads_point ptResw;
						acdbUcs2Wcs(ptRes, ptResw, false);
						ptEnd = asPnt3d(ptResw);
						vtMin = ptEnd - ptFrom;
						vtMin.normalize();
					}
				}
				else if (nRes == RTKWORD)
				{
					TCHAR szKey[3];
					acedGetInput(szKey);
					if (_tcsicmp(_T("U"), szKey) == 0)
					{
						vtMin = AcGeVector3d::kZAxis;
					}
					else if (_tcsicmp(_T("D"), szKey) == 0)
					{
						vtMin = -AcGeVector3d::kZAxis;
					}
					double dTmp = param.dSize[0];
					param.dSize[0] = param.dSize[1];
					param.dSize[1] = dTmp;
				}

				if (vtMin.isParallelTo(vtMaj))
				{
					acutPrintf(_T("\n弯头的出口方向不能和主方向平行!"));
					pEnt->close();
					return;
				}

				double dr = GetElbowL(&param);

				AcGeVector3d vtToCen = vtMin.orthoProject(vtMaj);
				vtToCen.normalize();
				AcGePoint3d ptCen = ptFrom + dr * vtToCen;

				double dAng = vtMin.angleTo(vtMaj);//0-180
				double dDot = vtMin.dotProduct(vtMaj);
				if (dDot < -1.e-10 && dAng - PI / 2.0 < 1.e-10)
				{
					dAng = PI - dAng;
				}

				if (dAng - PI / 2.0 > 1.e-6)
				{
					acutPrintf(_T("弯头中心角度必须不大于90度"));
					pEnt->close();
					return;
				}

				if (dAng - PI < 1.e-10)
					dAng = PI - dAng;

				double dCord = dr * cos((PI - dAng) / 2.0);
				AcGeVector3d vtCord = vtMaj + vtMin;
				vtCord.normalize();
				ptMid = ptCen - vtCord * dCord;
				AcGeVector3d vtToM = ptMid - ptCen;
				vtToM.normalize();

				ptMid = ptCen + dr / cos((PI - dAng) / 2.0) * vtToM;

				AecDbECableJig jig;
				AecDbECableLine pipeline(&jig);
				pipeline.SetPipeParam(&param);
				pipeline.CreateElbow(vtMaj, ptMid, vtMin, &param, TRUE);
			}
			else
			{
				acutPrintf(_T("\n选择的实体不是管线!"));
			}
			pEnt->close();
		}
	}
}

//加乙字弯
void EL_JYZWCmdFnc()
{
	//选择管线末点加弯头
	ads_point pt1, pt2;
	ads_name ent1, ent2;
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n请在电缆沟末端选择平行电缆沟1:"), ent1, pRb, pt1);
	if (nRes == RTNORM)
	{
		nRes = CKTCadUtility::SelectEntity(_T("\n请在电缆沟末端选择平行电缆沟2:"), ent2, pRb, pt2);
		acutRelRb(pRb);
		if (nRes == RTNORM)
		{
			AcDbObjectId id1, id2;
			acdbGetObjectId(id1, ent1);
			acdbGetObjectId(id2, ent2);

			ads_point pt11, pt22;
			acdbUcs2Wcs(pt1, pt11, false);
			acdbUcs2Wcs(pt2, pt22, false);

			AcDbEntity *pEnt1 = NULL;
			AcDbEntity *pEnt2 = NULL;

			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1, id1, AcDb::kForWrite))
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt2, id2, AcDb::kForWrite))
				{
					AecDbECableTray *pPipe1 = AecDbECableTray::cast(pEnt1);
					AecDbECableTray *pPipe2 = AecDbECableTray::cast(pEnt2);

					if (pPipe1 != NULL && pPipe2 != NULL)
					{
						AcGeVector3d vtDir1 = pPipe1->EndPoint() - pPipe1->StartPoint();
						AcGeVector3d vtDir2 = pPipe2->EndPoint() - pPipe2->StartPoint();

						AcGePoint3d pt111, pt222;
						pPipe1->getClosestPointTo(asPnt3d(pt11), pt111, Adesk::kTrue);
						pPipe2->getClosestPointTo(asPnt3d(pt22), pt222, Adesk::kTrue);

						AcGePoint3d ptMid = MidPoint(pt111, pt222);

						if (vtDir1.isParallelTo(vtDir2))//平行
						{
							AecHvac::DuctParam param1, param2;
							memset(&param1, 0, sizeof(AecHvac::DuctParam));
							memset(&param2, 0, sizeof(AecHvac::DuctParam));

							pPipe1->GetDuctParam(param1);
							pPipe2->GetDuctParam(param2);

							if (param1.m_app != param2.m_app)
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的实体是桥架和缆沟!类型不一致,不可以乙字弯连接!"));
								return;
							}

							if ((int)param1.dSize[0] != (int)param2.dSize[0])
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的两根电缆沟主尺寸不相同,不能加乙字弯连接!"));
								return;
							}

							if ((int)param1.dSize[1] != (int)param2.dSize[1])
							{
								pEnt1->close();
								pEnt2->close();
								acutPrintf(_T("\n选择的两根电缆沟主尺寸不相同,不能加乙字弯连接!"));
								return;
							}

							//判断是否共面 XY 或立面叠加
							if (fabs(param1.m_dEl - param2.m_dEl) < 1.e-10)//等标高
							{
								/*
								m_mapSpecXData.GetAt(KEY_MAJBR, vtMaj);//进口方向
								m_mapSpecXData.GetAt(KEY_MINBR, vtMin);//出口方向
								m_mapSpecXData.GetAt(KEY_OFFSETDIR,vtOffset);//偏移方向
								//vtMaj == vtMin

								m_mapSpecXData.GetAt(KEY_NORMAL,vtNorm);
								m_mapSpecXData.GetAt(KEY_MID, ptMid);//中间点
								m_mapSpecXData.GetAt(KEY_Offset,dOffsetH);

								m_mapSpecXData.GetAt(HELB_RadRatio, dRatio);
								m_mapSpecXData.GetAt(PIPE_ELBOWANG,dSweepAngle);
								m_mapSpecXData.GetAt(PIPE_THICK, dThick);
								m_mapSpecXData.GetAt(HELB_LX, dLx);//直边长度
								*/

								//是否  不共线
								AcGePoint3d pt2;
								pPipe1->getClosestPointTo(pPipe2->EndPoint(), pt2, Adesk::kTrue);

								AcGeVector3d vt = pt2 - pPipe2->EndPoint();
								if (!vt.isZeroLength())//平面 不共线
								{
									if (!vtDir1.isCodirectionalTo(vtDir2))
										vtDir2.negate();

									AcGeVector3d vtOffset = vt;
									vtOffset.negate();

									CAcModuleResourceOverride myResources;
									COffSetDlg dlg;
									dlg.m_dOffsetH = vt.length();
									if (IDOK == dlg.DoModal())
									{
										AecDbEcFitting *pFit = new AecDbEcFitting;

										AecDbObjXDataMap *pXDataMap = pFit->GetSpecialtyData(AcDb::kForWrite);

										pFit->SetDuctParam(param1);

										vtDir1 = GetLineInfDir(pPipe1->StartPoint(), pPipe1->EndPoint(), asPnt3d(pt11));
										vtDir2 = GetLineInfDir(pPipe2->StartPoint(), pPipe2->EndPoint(), asPnt3d(pt22));
										vtDir2.negate();

										pXDataMap->SetAt(KEY_RUNTIME, eOffset);
										pXDataMap->SetAt(KEY_MAJBR, vtDir1);
										pXDataMap->SetAt(KEY_MINBR, vtDir2);
										pXDataMap->SetAt(KEY_OFFSETDIR, vtOffset);
										pXDataMap->SetAt(KEY_MID, ptMid);
										pXDataMap->SetAt(KEY_NORMAL, AcGeVector3d::kZAxis);
										pXDataMap->SetAt(KEY_Offset, dlg.m_dOffsetH);

										pXDataMap->SetAt(HELB_RadRatio, param1.m_dRatio);
										pXDataMap->SetAt(PIPE_ELBOWANG, dlg.m_dAngle);

										pXDataMap->SetAt(PIPE_THICK, param1.dSize[2]);
										pXDataMap->SetAt(HELB_LX, 50.0);
										pXDataMap->SetAt(KEY_CENNODRAW, !param1.m_bCenDraw);

										AecInterface inf0, inf1;
										pFit->GetInterface(0, inf0);
										pFit->GetInterface(1, inf1);

										//修改桥架的位置
										ModifyECableTray(pPipe1, inf0);
										ModifyECableTray(pPipe2, inf1);

										//设置图层
										AecHvac::DuctParam *pParam = &param1;
										AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, pParam->szSys, 4, _T("center2"), NULL);
										AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, pParam->szSys, nColor, _T("Continuous"), NULL);
										AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, pParam->szSys, 7, _T("Continuous"), NULL);

										pFit->setLayer(idOutLay);
										pFit->SetDoubleLayer(idOutLay);
										pFit->SetCenterLayer(idCenLay);
										pFit->SetCenterLayer(idCenLay);

										AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
									}
								}
							}
							else
							{
								//叠加
								AcGePoint3d pt2;
								pPipe1->getClosestPointTo(pPipe2->EndPoint(), pt2, Adesk::kTrue);
								AcGeVector3d vt = pt2 - pPipe2->EndPoint();

								AcGeTol tol;
								tol.setEqualVector(1.e-3);
								tol.setEqualPoint(1.e-3);
								if (vt.isParallelTo(AcGeVector3d::kZAxis, tol))
								{
									CAcModuleResourceOverride myResources;
									COffSetDlg dlg;
									dlg.m_dOffsetH = vt.length();
									if (IDOK == dlg.DoModal())
									{
										AcGeVector3d vtOffset = vt;
										vtOffset.negate();

										AcGeVector3d vtNorm = vtDir1;
										vtNorm.rotateBy(PI / 2.0, AcGeVector3d::kZAxis);

										AecDbEcFitting *pFit = new AecDbEcFitting;
										AecDbObjXDataMap *pXDataMap = pFit->GetSpecialtyData(AcDb::kForWrite);

										pFit->SetDuctParam(param1);

										vtDir1 = GetLineInfDir(pPipe1->StartPoint(), pPipe1->EndPoint(), asPnt3d(pt11));
										vtDir2 = GetLineInfDir(pPipe2->StartPoint(), pPipe2->EndPoint(), asPnt3d(pt22));
										vtDir2.negate();

										pXDataMap->SetAt(KEY_RUNTIME, eOffset);
										pXDataMap->SetAt(KEY_MAJBR, vtDir1);
										pXDataMap->SetAt(KEY_MINBR, vtDir2);
										pXDataMap->SetAt(KEY_OFFSETDIR, vtOffset);
										pXDataMap->SetAt(KEY_MID, ptMid);
										pXDataMap->SetAt(KEY_NORMAL, vtNorm);
										pXDataMap->SetAt(KEY_Offset, dlg.m_dOffsetH);

										pXDataMap->SetAt(HELB_RadRatio, param1.m_dRatio);
										pXDataMap->SetAt(PIPE_ELBOWANG, dlg.m_dAngle);

										pXDataMap->SetAt(PIPE_THICK, param1.dSize[2]);
										pXDataMap->SetAt(HELB_LX, 50.0);
										pXDataMap->SetAt(KEY_CENNODRAW, param1.m_bCenDraw ? FALSE : TRUE);

										AecInterface inf0, inf1;
										pFit->GetInterface(0, inf0);
										pFit->GetInterface(1, inf1);

										//修改桥架的位置
										ModifyECableTray(pPipe1, inf0);
										ModifyECableTray(pPipe2, inf1);

										//设置图层
										AecHvac::DuctParam *pParam = &param1;
										AcDbObjectId idLay = KTSetting::InitLayer((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										int nColor = KTSetting::GetLayerColor((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT);
										AcDbObjectId idCenLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_CEN : LAY_TRENCH_CEN, pParam->szSys, 4, _T("center2"), NULL);
										AcDbObjectId idOutLay = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_OUT : LAY_TRENCH_OUT, pParam->szSys, nColor, _T("Continuous"), NULL);
										AcDbObjectId idSingle = CablelineTools::AecInitLayerEx((pParam->m_app == WPipe::eBridge) ? LAY_CABTRY_SIG : LAY_TRENCH_SIG, pParam->szSys, 7, _T("Continuous"), NULL);

										pFit->setLayer(idOutLay);
										pFit->SetDoubleLayer(idOutLay);
										pFit->SetCenterLayer(idCenLay);
										pFit->SetCenterLayer(idCenLay);

										AcDbObjectId id = CoreTools::AddToModelSpace(pFit);
									}
								}
								else
								{
									acutPrintf(_T("\n选择的两个电缆沟不在叠加方向!不可加乙字弯连接!"));
								}
							}
						}
						else
						{
							acutPrintf(_T("\n选择的两个电缆沟不平行!不可加乙字弯连接!"));
						}
					}
					pEnt2->close();
				}
				pEnt1->close();
			}
		}
	}
}

//缆沟支架
void EL_LGZJCmdFnc()
{
	acedPostCommand(_T("PL_LGZJ "));
}

typedef struct XHolder_	// 支架
{
	// 支架行数,或非等距支架行数
	Adesk::Int32 N;

	//等距电缆沟用
	BOOL bNoEquDis;

	// 支架垂直间距(m)
	double V;

	//或非等距支架,最多64行
	Adesk::Int32 nDists[128];//间距
	Adesk::Int32 nSyss[128];//系统序号

	// 支架臂长度(mm)
	double L;

	// 角钢宽度(mm)
	double W;

	// 角钢厚度(mm)
	double t;

	//相对位置标高
	double dBomEl;

	// 材质
	TCHAR szMat[33];

	//编号
	TCHAR szNo[33];

	// 用途
	TCHAR szUsage[33];

	//预留
	double dResv[6];
	int    nResv[6];
	TCHAR  szResv[MAX_PATH];

}XHolder_;

#include "CWTXXDlg.h"
void EL_TESTCmdFnc()
{
	ads_name ent;
	ads_point pt;
	int nRes = acedEntSel(_T("\npick an ent:"), ent, pt);
	if (nRes == RTNORM)
	{
		AcDbObjectId id;
		acdbGetObjectId(id, ent);

		XHolder_ hld;
		memset(&hld, 0, sizeof(XHolder_));
		
		hld.N = 128;
		hld.bNoEquDis = 1;
		hld.V = 233;

		for (int i = 0; i < 128; i++)
		{
			hld.nDists[i] = i + 1;
			hld.nSyss[i] = i;
		}
		hld.L = 330;
		hld.W = 50;
		hld.t = 5;
		hld.dBomEl = -178;

		_tcscpy(hld.szMat, _T("Q235-A"));
		_tcscpy(hld.szNo, _T("Q235-A-100-009"));
		_tcscpy(hld.szUsage, _T("高压电缆支吊架"));

		AecDbObjXDataMap xData;
		xData.SetAt(_T("HOLDER"),&hld,sizeof(XHolder_));
		nRes = xData.Write(id, _T("XDATA_"));
		if (!nRes)
			acutPrintf(_T("\nFailed write large xdata!!"));

		AecDbObjXDataMap xData2;
		xData2.Read(id, _T("XDATA_"));

		int nSize = sizeof(XHolder_);

		void *pData = NULL;
		xData2.GetAt(_T("HOLDER"), pData, nSize);

		XHolder_ *pHolder = NULL;
		if (pData != NULL)
		{
			pHolder = (XHolder_ *)pData;
			acutPrintf(_T("\nSuccess read large xdata!!"));
		}
	}
}

//布置支架
void EL_BZZJCmdFnc()
{
	acedPostCommand(_T("PL_FZZJ "));
}

void DBL_AEC_EWCABLE()
{
	AcDbObjectId id;
	bool bIsOk = GetDoubleClickEnt(_T("DBL_AEC_EWCABLE"), id);

	if (bIsOk && id.isValid())
	{
		CAcModuleResourceOverride myResources;
		CPSDLDlg dlg;

		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
		{
			AecDbEwCable *pCableNew = AecDbEwCable::cast(pEnt);
			if (pCableNew != NULL)
			{
				pCableNew->GetSpecialtyData()->GetAt(_T("COLOR"), dlg.m_data.m_nClr);

				AcDbObjectId idLt = pCableNew->GetSingleLineType();

				AcDbSymbolTableRecordPointer<AcDbLinetypeTableRecord> rcLt(idLt,AcDb::kForRead);
				if (rcLt.openStatus() == Acad::eOk)
				{
					LPCTSTR pszName = NULL;
					rcLt->getName(pszName);
					if (pszName != NULL)
					{
						dlg.m_data.m_linetype = pszName;
					}
				}

				pCableNew->GetSpecialtyData()->GetAt(CABLE_D, dlg.m_data.m_dD);
				pCableNew->GetSpecialtyData()->GetAt(CABLE_MODEL, dlg.m_data.m_sModel);
				pCableNew->GetSpecialtyData()->GetAt(CABLE_FACTORY, dlg.m_data.m_sFactory);
				pCableNew->GetSpecialtyData()->GetAt(CABLE_RATIO, dlg.m_data.m_dDn);

				if (IDOK == dlg.DoModal())
				{
					pCableNew->GetSpecialtyData()->SetAt(_T("COLOR"), dlg.m_data.m_nClr);

					pCableNew->SetSingleLineType(KTSetting::InitLineStyle(dlg.m_data.m_linetype));
					pCableNew->SetDoubleLineType(KTSetting::InitLineStyle(dlg.m_data.m_linetype));

					pCableNew->GetSpecialtyData()->SetAt(CABLE_D, dlg.m_data.m_dD);
					pCableNew->GetSpecialtyData()->SetAt(CABLE_MODEL, dlg.m_data.m_sModel);
					pCableNew->GetSpecialtyData()->SetAt(CABLE_FACTORY, dlg.m_data.m_sFactory);
					pCableNew->GetSpecialtyData()->SetAt(CABLE_RATIO, dlg.m_data.m_dDn);

				}
			}

			pEnt->close();
		}
	}
}

//铺设电缆
void EL_HZDLCmdFnc()
{
	CAcModuleResourceOverride myResources;
	CPSDLDlg dlg;
	if (IDOK == dlg.DoModal() )
	{
		AcPolylineJig wallJig;
		wallJig.InitStatusRecsFor3dRoadAxisLine();

		if ( wallJig.DoIt() )
		{
			AcDbObjectId idLayCable = KTSetting::InitLayer(_T("LAY_CABLE"),true);

			AcDbObjectId idRoadLn = wallJig.GetRoadAxisLineId();

			AcDbEntity* pEnt = NULL;
			if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,idRoadLn,AcDb::kForWrite))
			{
				AecDb3dRoadAxisLine* pRoad = AecDb3dRoadAxisLine::cast(pEnt);
				if (pRoad != NULL)
				{	
					//第一段必须是直线段
					AcGeVector3d vtOff(0, 1, 0);
					vtOff.normalize();
					AcDbCurve* pFirst = pRoad->GetCurveSeg(0);
					if (pFirst != NULL)
					{
						AcDbVoidPtrArray arCurOff;
						pFirst->getOffsetCurves(dlg.m_data.m_dSpace, arCurOff);

						if (!arCurOff.isEmpty())
						{
							AcDbCurve *pFirst2 = (AcDbCurve *)arCurOff.first();
							if (pFirst2 != NULL)
							{
								AcGePoint3d ptS, ptS2;
								pFirst->getStartPoint(ptS);
								pFirst2->getStartPoint(ptS2);
								vtOff = ptS2 - ptS;
								vtOff.normalize();
							}
						}
					}
					vtOff *= (dlg.m_data.m_dSpace + dlg.m_data.m_dD);

					pRoad->SaveDandRatio(dlg.m_data.m_dD, dlg.m_data.m_dDn);
					//pRoad->Create3dRoadAxisLine(dlg.m_data.m_dD, dlg.m_data.m_dDn);

					AcGeMatrix3d xMove;
					for (int i = 0;i < dlg.m_nLines;i++)
					{
						AecDbEwCable* pCableNew = new AecDbEwCable;

						AecDb3dRoadAxisLine *pRoadAxLnCln = (AecDb3dRoadAxisLine *)pRoad->clone();
						pCableNew->SetBaseCurve(pRoadAxLnCln);

						pCableNew->SetSection(dlg.m_data.m_dD,0.0);

						pCableNew->setColorIndex(dlg.m_data.m_nClr);
						pCableNew->GetSpecialtyData()->SetAt(_T("COLOR"), dlg.m_data.m_nClr);

						pCableNew->SetSingleLayer(idLayCable);
						pCableNew->SetDoubleLayer(idLayCable);

						pCableNew->SetSingleLineType(KTSetting::InitLineStyle(dlg.m_data.m_linetype));
						pCableNew->SetDoubleLineType(KTSetting::InitLineStyle(dlg.m_data.m_linetype));

						pCableNew->setLayer(idLayCable);

						pCableNew->GetSpecialtyData()->SetAt(KEY_2DSTYLE, 1);
						pCableNew->GetSpecialtyData()->SetAt(CABLE_D, dlg.m_data.m_dD);
						pCableNew->GetSpecialtyData()->SetAt(CABLE_MODEL, dlg.m_data.m_sModel);
						pCableNew->GetSpecialtyData()->SetAt(CABLE_FACTORY, dlg.m_data.m_sFactory);
						pCableNew->GetSpecialtyData()->SetAt(CABLE_RATIO, dlg.m_data.m_dDn);

						CKTCadUtility::AddToBlockTableRecord(pCableNew);
						pCableNew->close();

						xMove.setToTranslation(vtOff);
						pRoad->transformBy(xMove);
						//pRoad->offset(dlg.m_dSpace);
					}
					pRoad->erase();
				}
				pEnt->close();
			}
		}
	}
}

static double getPScale()
{
	double dPScale(100.);
	CString sScale(_T("1:100"));
	AecDbObjXDataMap xDataMap;
	if (KTModelLayoutXData::ReadModelXData(KT_PIPEINIT, xDataMap))
		xDataMap.GetAt(DOC_SCALE, sScale);

	int idx = sScale.Find(':');
	if (idx != -1)
	{
		sScale = sScale.Right(sScale.GetLength() - idx - 1);
		dPScale = _ttof(sScale);
	}

	return dPScale;
}

static void GetDuctParam(AecDbObjXDataMap& xData,AecHvac::DuctParam &data)
{
	memset(&data, 0, sizeof(AecHvac::DuctParam));

	int nType = 0;
	xData.GetAt(KEY_SECSHAPE, nType);

	int nCenNDraw = 0;
	ESection eType = (ESection)nType;
	data.eType = eType;

	data.m_app = WPipe::eBridge;
	int nApp = 7;
	xData.GetAt(KEY_APP, nApp);
	data.m_app = WPipe::EApp(nApp);
	if (nApp == 0)
		data.m_app = WPipe::eBridge;

	switch (eType)
	{
	case eRect:
	{
		xData.GetAt(KEY_SIZE1, data.dSize[0]); //L
		xData.GetAt(KEY_SIZE2, data.dSize[1]); //w
		xData.GetAt(PIPE_THICK, data.dSize[2]);//t
		xData.GetAt(KEY_CENNODRAW, nCenNDraw);//中心线
		data.m_bCenDraw = nCenNDraw ? 0 : 1;
		break;
	}
	case eCircle:
	{
		xData.GetAt(KEY_SIZE1, data.dSize[0]); //D
		data.dSize[1] = 0.0;
		xData.GetAt(PIPE_THICK, data.dSize[2]);//t
		xData.GetAt(KEY_CENNODRAW, nCenNDraw);//中心线
		data.m_bCenDraw = nCenNDraw ? 0 : 1;
		break;
	}
	default:
		break;
	}

	//假设是平行XY
	//data.m_dEl = StartPoint().z;

	data.m_nAlign = 1;//居中
	xData.GetAt(KEY_WELLW, data.dSize[4]);
	xData.GetAt(KEY_NORMAL, data.m_vtNrom);
	xData.GetAt(KEY_RRATIO, data.m_dRatio);

	xData.GetAt(KEY_FULLPER, data.m_dFullPer);
	data.m_dFillUsed = 0;
	xData.GetAt(KEY_FILLUSED, data.m_dFillUsed);

	xData.GetAt(KEY_FULLPER2, data.m_dFullPer2);
	data.m_dFillUsed2 = 0;
	xData.GetAt(KEY_FILLUSED2, data.m_dFillUsed2);

	CString sTemp = _T("");
	xData.GetAt(KEY_SN, sTemp);
	_tcscpy(data.szNo, (LPCTSTR)sTemp);

	sTemp = _T("");
	xData.GetAt(KEY_TYPE, sTemp);
	_tcscpy(data.szType, (LPCTSTR)sTemp);

	sTemp = _T("");
	xData.GetAt(KEY_EXT, sTemp);
	_tcscpy(data.szExt, (LPCTSTR)sTemp);

	sTemp = _T("");
	xData.GetAt(PIPE_SYS, sTemp);
	_tcscpy(data.szSys, (LPCTSTR)sTemp);

	xData.GetAt(KEY_COVER, data.m_bCover);
	xData.GetAt(KEY_SPART, data.m_bSpart);
	xData.GetAt(KEY_SYSSPLT, data.m_nSysSplit);
	//...
	xData.GetAt(KEY_MATERIAL, sTemp);
	_tcscpy(data.szMat, (LPCTSTR)sTemp);

	xData.GetAt(KEY_FACTORY, sTemp);
	_tcscpy(data.szFat, (LPCTSTR)sTemp);

	xData.GetAt(KEY_REM, sTemp);
	_tcscpy(data.szRem, (LPCTSTR)sTemp);

	//提取预留数据 电缆沟等用
	CString sKey;
	for (int i = 5; i < 33; i++)//
	{
		sKey.Format(_T("%s_%d"), KEY_SIZE, i);
		xData.GetAt(sKey, data.dSize[i]);
	}
}

//桥架标1 -- AecDbEwPipeDim方式
void EL_QJBZCmdFnc1()
{
	ads_name ent1;
	ads_point pt1, pt2;

	struct resbuf* pRb = acutBuildList(RTDXF0, DXF_PIPE_FIT_DIM, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n请选择要标注的桥架:"), ent1, pRb, pt1);
	acutRelRb(pRb);
	if (nRes == RTNORM)
	{
		nRes = acedGetPoint(pt1, _T("\n请选择位置:"), pt2);
		if (nRes == RTNORM)
		{
			ads_point pt11, pt22;
			acdbUcs2Wcs(pt1, pt11, false);
			acdbUcs2Wcs(pt2, pt22, false);

			AcGePoint3d ptFr = asPnt3d(pt11);
			AcGePoint3d ptTo = asPnt3d(pt22);

			AcDbObjectId id1;
			acdbGetObjectId(id1, ent1);

			//
			AecHvac::DuctParam param;
			BOOL bGetParam = FALSE;

			AcDbEntity* pEnt = NULL;
			if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,id1,AcDb::kForRead))
			{
				AecDbECableTray* pTray = AecDbECableTray::cast(pEnt);
				if (pTray != NULL)
				{
					pTray->GetDuctParam(param);
					bGetParam = TRUE;
				}

				AecDbEcFitting* pFit = AecDbEcFitting::cast(pEnt);
				if (pFit != NULL)
				{
					pFit->GetDuctParam(param);
					bGetParam = TRUE;
				}

				AcDbLine *pLn = AcDbLine::cast(pEnt);
				if (pLn != NULL)
				{
					AecDbObjXDataMap xData;
					if (xData.Read(pEnt, BIMDATA_APP))
					{
						GetDuctParam(xData, param); bGetParam = TRUE;
					}
				}

				pEnt->close();
			}

			if (bGetParam)
			{
				CString sDimUp;
				sDimUp.Format(_T("%s %dx%d %s %s %s"),param.szType,(int)(param.dSize[0]+0.5),(int)(param.dSize[1]+0.5),param.szSys,param.szNo,param.szMat);

				AcDbObjectId idDimLay = KTSetting::InitLayer(gLayer_Pipe_Dim);
				AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(gTextStyle_Pipe_Dim);

				AecDbEwPipeDim* pDim = new AecDbEwPipeDim;
				pDim->AddAecDbWEntity(id1);

				pDim->SetDimStyle(0);
				pDim->SetDimDir(0);
				pDim->SetDimTextUporDownFlag(1);

				pDim->SetTextStyleId(idTSty);
				pDim->SetTextLayerId(idDimLay);
				pDim->SetPScale(getPScale());

				pDim->SetDimTextUporDownFlag(0);

				pDim->AddDimText(sDimUp,_T(""));

				pDim->SetTextHeight(2.5);
				pDim->SetTextWidthScale(0.75);

				pDim->AppendPoint(ptFr);
				pDim->AppendPoint(ptTo);

				pDim->SetDimupdownSpace(0.0);
				pDim->SetTextLayerId(idDimLay);

				CoreTools::AddToModelSpace(pDim);
			}
		}
	}
}

bool SortDuctParamBydR(AecHvac::DuctParam& pm1, AecHvac::DuctParam& pm2)
{
	if (pm1.m_dR <= pm2.m_dR)
		return true;
	return false;
}

//标注文字放在 DuctParam.szRem 中 临时
static bool GetCableTrayDimTxt(AecHvac::DuctParam &pm)
{
	//szType 类型 : 槽式，梯式，托盘式
	//1、槽式桥架代号：C ; 2、梯式桥架代号：T ; 3、托盘式桥架代号：P ; 4、组合式桥架代号：ZH
	//槽式;托盘式;梯式;组合式;大跨距式;钢制式;铝制式

	CString sPre = _T("");
	if ( NULL != _tcsstr(pm.szType, _T("槽式") ) )
	{
		sPre = _T(" C");
	}
	else if (NULL != _tcsstr(pm.szType, _T("梯式")))
	{
		sPre = _T(" T");
	}
	else if (NULL != _tcsstr(pm.szType, _T("托盘")))
	{
		sPre = _T(" P");
	}
	else if (NULL != _tcsstr(pm.szType, _T("组合式")))
	{
		sPre = _T(" ZH");
	}
	else if (NULL != _tcsstr(pm.szType, _T("大跨距")))
	{
		sPre = _T(" DJ");
	}
	else if (NULL != _tcsstr(pm.szType, _T("钢制")))
	{
		sPre = _T(" G");
	}
	else if (NULL != _tcsstr(pm.szType, _T("铝制")))
	{
		sPre = _T(" L");
	}
	else
	{
		sPre = _T("C");
	}

	CString sSize;
	sSize.Format(_T("电缆桥架 %dX%d(%s)"),(int)(pm.dSize[0]+0.5),(int)(pm.dSize[1]+0.5),pm.szSys);

	CString sDimTxt;
	sDimTxt += sPre;
	sDimTxt += _T("-");
	sDimTxt += sSize;

	_tcscpy(pm.szRem, sDimTxt);

	return true;
}

CQJBZDlg *pQJBZDlg = NULL;
CAutoWndDel autoDel3;

//桥架标2 -- AecDbEwPipeDim方式
void EL_QJBZCmdFnc2()
{
	//扫线标注选择桥架
	//弹出对话框,可以多行
	ads_point pt1, pt2;
	int nRes = acedGetPoint(NULL, _T("\n请拾取桥架标注起点:"), pt1);
	if (nRes == RTNORM)
	{
		nRes = acedGetPoint(pt1, _T("\n请拾取桥架标注扫掠线末点:"), pt2);
		if (nRes == RTNORM)
		{
			ads_point pt11, pt22;
			acdbUcs2Wcs(pt1, pt11, false); pt11[Z] = 0.0;
			acdbUcs2Wcs(pt2, pt22, false); pt22[Z] = 0.0;
			AcDbLine ln(asPnt3d(pt11), asPnt3d(pt22));

			struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE_DIM_ONLY, 0);
			AcAxDocLock lock;
			AcGePoint3d ptS, ptE;
			ads_name ss, ent;
			nRes = acedSSGet(_T("C"), pt1, pt2, pRb, ss);
			if (nRes == RTNORM)
			{
				Adesk::Int32 nLen = 0;
				acedSSLength(ss, &nLen);

				AcDbObjectId id;
				AcDbEntity *pEnt = NULL;
				AecHvac::DuctParam param;
				AcDbLine ln1;

				std::vector<AecHvac::DuctParam> arPams;

				for (int i = 0;i < nLen;i++)
				{
					acedSSName(ss, i, ent);
					acdbGetObjectId(id, ent);

					if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
					{
						AecDbECableTray *pTray = AecDbECableTray::cast(pEnt);
						if (pTray != NULL)
						{
							memset(&param, 0, sizeof(AecHvac::DuctParam));
							pTray->GetDuctParam(param);
							
							ptS = pTray->StartPoint();
							ptE = pTray->EndPoint();

							ln1.setStartPoint(ptS); ln1.setEndPoint(ptE);

							AcGePoint3dArray pts;
							ln1.intersectWith(&ln, AcDb::kExtendBoth, AcGePlane::kXYPlane,pts);

							GetCableTrayDimTxt(param);
							if (pts.length() == 1)//must
							{
								ln.getParamAtPoint(pts.first(), param.m_dR);
								arPams.push_back(param);
							}
						}

						AcDbLine *pLn = AcDbLine::cast(pEnt);
						if (pLn != NULL)
						{
							AecDbObjXDataMap xData;
							if (xData.Read(pEnt, BIMDATA_APP))
							{
								memset(&param, 0, sizeof(AecHvac::DuctParam));
								GetDuctParam(xData, param);

								ptS = pLn->startPoint();
								ptE = pLn->endPoint();

								ln1.setStartPoint(ptS); ln1.setEndPoint(ptE);

								AcGePoint3dArray pts;
								ln1.intersectWith(&ln, AcDb::kExtendBoth, AcGePlane::kXYPlane, pts);

								GetCableTrayDimTxt(param);
								if (pts.length() == 1)//must
								{
									ln.getParamAtPoint(pts.first(), param.m_dR);
									arPams.push_back(param);
								}
							}
						}

						pEnt->close();
					}
				}

				//按照pt1--pt2 排序
				std::sort(arPams.begin(),arPams.end(), SortDuctParamBydR);
				acedSSFree(ss);

				//弹出界面
				if (pQJBZDlg == NULL)
				{
					pQJBZDlg = new CQJBZDlg;
					autoDel3.m_pWnd = pQJBZDlg;
				}

				if (!IsWindow(pQJBZDlg->m_hWnd))
				{
					CAcModuleResourceOverride myResources;
					pQJBZDlg->Create(CQJBZDlg::IDD);
				}
				
				pQJBZDlg->RemoveAllDimTxt();
				for (int ii = 0;ii < arPams.size();ii++)
				{
					AecHvac::DuctParam &pm = arPams.at(ii);
					pQJBZDlg->AppendDimTxt(pm.szRem);
				}

				CRect rcW;
				pQJBZDlg->GetWindowRect(rcW);
				int nH = rcW.Height();
				int nW = rcW.Width();

				CRect rc;
				acedGetAcadDwgView()->GetWindowRect(rc);

				rcW.left = rc.left;
				rcW.right = rcW.left + nW;
				rcW.top = rc.top;
				rcW.bottom = rcW.top + nH;
				pQJBZDlg->MoveWindow(rcW);

				pQJBZDlg->ShowWindow(SW_SHOW);

				ads_point pt3,pt33;
				nRes = acedGetPoint(pt2, _T("\n请拾取桥架标注放置方向点:"), pt3);
				if (nRes == RTNORM)
				{
					acdbUcs2Wcs(pt3, pt33, false);

					AcDbObjectId idDimLay = KTSetting::InitLayer(gLayer_Pipe_Dim);
					AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(gTextStyle_Pipe_Dim);

					AecDbEwPipeDim *pDim = new AecDbEwPipeDim;

					pDim->SetDimStyle(4);
					pDim->SetDimDir(0);
					pDim->SetDimTextUporDownFlag(1);

					pDim->SetTextStyleId(idTSty);
					pDim->SetTextLayerId(idDimLay);
					pDim->SetPScale(getPScale());

					pDim->SetDimTextUporDownFlag(0);

					CStringArray arDimTxt;
					pQJBZDlg->GetDimTxts(arDimTxt);
					for (int ii = 0; ii < arDimTxt.GetSize(); ii++)
					{
						pDim->AddDimText(arDimTxt.GetAt(ii), _T(""));
					}

					pDim->SetTextHeight(2.5);
					pDim->SetTextWidthScale(0.75);

					pDim->AppendPoint(asPnt3d(pt11));
					pDim->AppendPoint(asPnt3d(pt22));
					pDim->AppendPoint(asPnt3d(pt33));

					pDim->SetDimupdownSpace(0.0);
					pDim->SetTextLayerId(idDimLay);

					CoreTools::AddToModelSpace(pDim);
				}
				pQJBZDlg->ShowWindow(SW_HIDE);
			}
			acutRelRb(pRb);
		}
	}
}

void EL_QJBHCmdFnc()
{
	//DXF_PIPE_FIT
	//扫线标注选择桥架
	//弹出对话框,可以多行
	ads_point pt1, pt2;
	int nRes = acedGetPoint(NULL, _T("\n请拾取桥架标注引出起点:"), pt1);
	if (nRes == RTNORM)
	{
		nRes = acedGetPoint(pt1, _T("\n请拾取桥架标注引出末点:"), pt2);
		if (nRes == RTNORM)
		{
			ads_point pt11, pt22;
			acdbUcs2Wcs(pt1, pt11, false); pt11[Z] = 0.0;
			acdbUcs2Wcs(pt2, pt22, false); pt22[Z] = 0.0;
			AcDbLine ln(asPnt3d(pt11), asPnt3d(pt22));

			struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE_FIT_DIM_ONLY, 0);

			AcAxDocLock lock;
			AcGePoint3d ptS, ptE;
			ads_name ss, ent;
			nRes = acedSSGet(_T("C"), pt1, pt2, pRb, ss);
			if (nRes == RTNORM)
			{
				Adesk::Int32 nLen = 0;
				acedSSLength(ss, &nLen);

				if (nLen > 0)
				{
					acedSSName(ss, 0, ent);

					AcDbObjectId id;
					acdbGetObjectId(id, ent);

					TCHAR szHd[17];
					id.handle().getIntoAsciiBuffer(szHd);

					bool bGetParam = false;
					AecHvac::DuctParam param;

					AcDbEntity *pEnt = NULL;
					if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
					{
						AecDbECableTray *pTray = AecDbECableTray::cast(pEnt);
						if (pTray != NULL)
						{
							memset(&param, 0, sizeof(AecHvac::DuctParam));
							pTray->GetDuctParam(param);
							bGetParam = true;
						}

						AecDbEcFitting *pEFit = AecDbEcFitting::cast(pEnt);
						if (pEFit != NULL)
						{
							memset(&param, 0, sizeof(AecHvac::DuctParam));
							pEFit->GetDuctParam(param);
							bGetParam = true;
						}

						AcDbLine *pLn = AcDbLine::cast(pEnt);
						if (pLn != NULL)
						{
							AecDbObjXDataMap xData;
							if (xData.Read(pEnt, BIMDATA_APP))
							{
								memset(&param, 0, sizeof(AecHvac::DuctParam));
								GetDuctParam(xData, param);
								bGetParam = true;
							}
						}
						pEnt->close();
					}

					if (bGetParam)
					{
						CString sDimTxt;
						sDimTxt.Format(_T("%s_%s"),szHd,param.szNo);

						//...

						ads_point pt11, pt22;
						acdbUcs2Wcs(pt1, pt11, false); pt11[Z] = 0.0;
						acdbUcs2Wcs(pt2, pt22, false); pt22[Z] = 0.0;

						//弹出界面
						if (pQJBZDlg == NULL)
						{
							pQJBZDlg = new CQJBZDlg;
							autoDel3.m_pWnd = pQJBZDlg;
						}

						if (!IsWindow(pQJBZDlg->m_hWnd))
						{
							CAcModuleResourceOverride myResources;
							pQJBZDlg->Create(CQJBZDlg::IDD);
						}

						pQJBZDlg->RemoveAllDimTxt();
						pQJBZDlg->AppendDimTxt(sDimTxt);

						CRect rcW;
						pQJBZDlg->GetWindowRect(rcW);
						int nH = rcW.Height();
						int nW = rcW.Width();

						CRect rc;
						acedGetAcadDwgView()->GetWindowRect(rc);

						rcW.left = rc.left;
						rcW.right = rcW.left + nW;
						rcW.top = rc.top;
						rcW.bottom = rcW.top + nH;
						pQJBZDlg->MoveWindow(rcW);

						pQJBZDlg->ShowWindow(SW_SHOW);

						ads_point pt3, pt33;
						nRes = acedGetPoint(pt2, _T("\n请拾取桥架标注放置方向点:"), pt3);
						if (nRes == RTNORM)
						{
							acdbUcs2Wcs(pt3, pt33, false);

							AcDbObjectId idDimLay = KTSetting::InitLayer(gLayer_Pipe_Dim);
							AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(gTextStyle_Pipe_Dim);

							AecDbEwPipeDim *pDim = new AecDbEwPipeDim;

							pDim->SetDimStyle(0);
							pDim->SetDimDir(0);
							pDim->SetDimTextUporDownFlag(1);

							pDim->SetTextStyleId(idTSty);
							pDim->SetTextLayerId(idDimLay);
							pDim->SetPScale(getPScale());

							pDim->SetDimTextUporDownFlag(0);

							CStringArray arDimTxt;
							pQJBZDlg->GetDimTxts(arDimTxt);
							for (int ii = 0; ii < arDimTxt.GetSize(); ii++)
							{
								pDim->AddDimText(arDimTxt.GetAt(ii), _T(""));
							}

							pDim->SetTextHeight(2.5);
							pDim->SetTextWidthScale(0.75);

							pDim->AppendPoint(asPnt3d(pt11));
							pDim->AppendPoint(asPnt3d(pt22));
							pDim->AppendPoint(asPnt3d(pt33));

							pDim->SetDimupdownSpace(0.0);
							pDim->SetTextLayerId(idDimLay);

							CoreTools::AddToModelSpace(pDim);
						}
						pQJBZDlg->ShowWindow(SW_HIDE);
					}
				}
				acedSSFree(ss);
			}
			acutRelRb(pRb);
		}
	}
}

/*
typedef struct PSDLData
{
	double m_dBomEl;	// 底部标高
	int m_nCount;		// 敷设几条
	int m_nClr;			// 颜色
	double m_dDn;		// 曲率半径
	double m_dSpace;	// 线缆间距
	double m_dD;		// 外径
	CString m_linetype;	// 线型
	CString m_sModel;	// 型号
	CString m_sFactory;	// 厂家
}PSDLDATA;
*/

//电缆标注
void EL_DLBZCmdFnc()
{
	ads_name ent1;
	ads_point pt1, pt2;

	struct resbuf* pRb = acutBuildList(RTDXF0, DXF_ECABLE, 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n请选择要标注的电缆:"), ent1, pRb, pt1);
	acutRelRb(pRb);
	if (nRes == RTNORM)
	{
		nRes = acedGetPoint(pt1, _T("\n请选择位置:"), pt2);
		if (nRes == RTNORM)
		{
			ads_point pt11, pt22;
			acdbUcs2Wcs(pt1, pt11, false);
			acdbUcs2Wcs(pt2, pt22, false);

			AcGePoint3d ptFr = asPnt3d(pt11);
			AcGePoint3d ptTo = asPnt3d(pt22);

			AcDbObjectId id1;
			acdbGetObjectId(id1, ent1);

			PSDLData param;
			BOOL bGetParam = FALSE;

			AcDbEntity* pEnt = NULL;
			if ( Acad::eOk == acdbOpenAcDbEntity(pEnt,id1,AcDb::kForRead))
			{
				AecDbEwCable* pCable = AecDbEwCable::cast(pEnt);
				if (pCable != NULL)
				{
					pCable->GetSpecialtyData(AcDb::kForRead)->GetAt(CABLE_D, param.m_dD);
					pCable->GetSpecialtyData(AcDb::kForRead)->GetAt(CABLE_MODEL, param.m_sModel);
					pCable->GetSpecialtyData(AcDb::kForRead)->GetAt(CABLE_FACTORY, param.m_sFactory);
					pCable->GetSpecialtyData(AcDb::kForRead)->GetAt(CABLE_RATIO, param.m_dDn);

					bGetParam = TRUE;
				}
				pEnt->close();
			}

			if (bGetParam)
			{
				CString sDimUp,sTmp;
				sDimUp.Format(_T("%s"),param.m_sModel);
				sDimUp += _T("Ø");
				sTmp.Format(_T("%d 曲率半径:%d"),(int)(param.m_dD+0.5),(int)(param.m_dDn+0.5));
				sDimUp += sTmp;

				AcDbObjectId idDimLay = KTSetting::InitLayer(gLayer_Pipe_Dim);
				AcDbObjectId idTSty = CKTCadUtility::InitTextStyle(gTextStyle_Pipe_Dim);

				AecDbEwPipeDim* pDim = new AecDbEwPipeDim;
				pDim->AddAecDbWEntity(id1);

				pDim->SetDimStyle(0);
				pDim->SetDimDir(0);
				pDim->SetDimTextUporDownFlag(1);

				pDim->SetTextStyleId(idTSty);
				pDim->SetTextLayerId(idDimLay);
				pDim->SetPScale(100.0);

				pDim->SetDimTextUporDownFlag(0);

				pDim->AddDimText(sDimUp,_T(""));

				pDim->SetTextHeight(2.5);
				pDim->SetTextWidthScale(0.75);

				pDim->AppendPoint(ptFr);
				pDim->AppendPoint(ptTo);

				pDim->SetDimupdownSpace(0.0);
				pDim->SetTextLayerId(idDimLay);

				CoreTools::AddToModelSpace(pDim);
			}
		}
	}
}

//合并桥架
void EL_HBQJCmdFnc()
{
	ads_name ss,ent1,ent2;
	struct resbuf* pRb = acutBuildList(RTDXF0, DXF_PIPE, 0);

	int nRes = CKTCadUtility::SelectEntities(_T("\n请框选两个平行共线同属性的桥架:"), ss,pRb);
	acutRelRb(pRb);

	if ( RTNORM == nRes)
	{
		Adesk::Int32 nLen = 0;
		acedSSLength(ss,&nLen);

		if (nLen == 2)
		{
			AcDbObjectId id1,id2;

			acedSSName(ss,0,ent1);
			acdbGetObjectId(id1,ent1);

			acedSSName(ss,1,ent2);
			acdbGetObjectId(id2,ent2);

			AcDbEntity* pEnt1 = NULL;
			AcDbEntity* pEnt2 = NULL;

			if (Acad::eOk == acdbOpenAcDbEntity(pEnt1,id1,AcDb::kForWrite))
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt2,id2,AcDb::kForWrite))
				{
					AecDbECableTray* pDuct1 = AecDbECableTray::cast(pEnt1);
					AecDbECableTray* pDuct2 = AecDbECableTray::cast(pEnt2);

					if (pDuct1 != NULL && pDuct2 != NULL)
					{
						AcGeVector3d vt1 = pDuct1->GetTailDir();
						AcGeVector3d vt2 = pDuct2->GetTailDir();

						AecHvac::DuctParam data1,data2;
						memset(&data1,0,sizeof(AecHvac::DuctParam));
						memset(&data2,0,sizeof(AecHvac::DuctParam));

						pDuct1->GetDuctParam(data1);
						pDuct2->GetDuctParam(data2);

						if ( vt1.isParallelTo(vt2) && //平行
							fabs(data1.m_dEl - data2.m_dEl) < 1.e-3 && //标高
							fabs(data1.dSize[0] - data2.dSize[0]) < 1.e-3 && //尺寸
							fabs(data1.dSize[1] - data2.dSize[1]) < 1.e-3 )
						{
							AcGePoint3d ptS1 = pDuct1->StartPoint();
							AcGePoint3d ptE1 = pDuct1->EndPoint();

							AcGePoint3d ptS2 = pDuct2->StartPoint();
							AcGePoint3d ptE2 = pDuct2->EndPoint();

							AcGePoint3dArray arPts;
							arPts.append(ptS1);
							arPts.append(ptE1);

							if (arPts.find(ptS2) == -1)
								arPts.append(ptS2);

							if (arPts.find(ptE2) == -1)
								arPts.append(ptE2);

							AcDbLine ln(ptS1,ptE1);
							SortPoints(arPts,&ln);

							pDuct1->SetStartPoint(arPts.first());
							pDuct1->SetEndPoint(arPts.last());

							pDuct2->erase();
						}
						else
						{
							acutPrintf(_T("\n选择的两个桥架实体几何属性不一致!"));
						}
					}
					pEnt2->close();
				}
				pEnt1->close();
			}
		}
		else
		{
			acutPrintf(_T("\n必须选择两个桥架实体!"));
		}
	}
	acedSSFree(ss);
}

//路径曲线
void EL_LJQXCmdFnc()
{
	//弹出用途界面
	CAcModuleResourceOverride myResources;
	CLJQXDlg dlg;
	if (IDOK != dlg.DoModal())
	{
		return;
	}

	AcDbObjectId idLay;
	switch (dlg.m_nForUse)
	{
		case 0://pipe
		{
			idLay = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
			break;
		}
		case 1://桥架
		{
			idLay = KTSetting::InitLayer(LAY_CABTRY_OUT);
			break;
		}
		case 2://缆沟
		{
			idLay = KTSetting::InitLayer(LAY_TRENCH_OUT);
			break;
		}
		case 3://线管
		{
			idLay = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
			break;
		}
		case 4://预埋
		{
			idLay = KTSetting::InitLayer(LAY_CABTRY_SIG);
			break;
		}
		default:
		{
			break;
		}
	}

	AcPolylineJig jig;
	jig.InitStatusRecsForLineSegs();
	if (jig.DoIt())
	{
		AcDbObjectId id = jig.GetRoadAxisLineId();

		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
		{
			//设置桥架图层
			pEnt->setLayer(idLay);
			pEnt->close();
		}
	}
}

typedef struct Clos2Point
{
	AcGePoint3d pt1;
	AcGePoint3d pt2;
}CLOS2POINT;

bool CompareC2P(Clos2Point& cpt1, Clos2Point& cpt2)
{
	double d1 = cpt1.pt1.distanceTo(cpt1.pt2);
	double d2 = cpt2.pt1.distanceTo(cpt2.pt2);
	if (d1 < d2)
		return true;
	return false;
}

static void GetClosestPointToEcFit(AcGePoint3d& pt, const AcGePoint3d& ptMid, AcArray<AecInterface>& arInfs, AcGePoint3d& ptOn)
{
	//计算距离那条中心线最近
	AcGePoint3d ptTmp;
	AcDbLine ln;

	Clos2Point c2p;
	std::vector<Clos2Point> c2ps;

	for (int i = 0;i < arInfs.length();i++)
	{
		AecInterface &inf = arInfs.at(i);

		ln.setStartPoint(ptMid);
		ln.setEndPoint(inf.ptPos);

		ln.getClosestPointTo(pt, ptTmp, Adesk::kFalse);
		c2p.pt1 = pt;
		c2p.pt2 = ptTmp;
		c2ps.push_back(c2p);
	}

	std::sort(c2ps.begin(), c2ps.end(), CompareC2P);

	ptOn = (*c2ps.begin()).pt2;
}

//设备接点
void EL_ZLJBCmdFnc()
{
	//选择设备
	ads_name ent;
	ads_point pt, pt2;

	struct resbuf *pRb = acutBuildList(RTDXF0, _T("INSERT,AEC_DBWEQUIPMENT,AEC_DBCABTRY,AEC_DBECFIT"), 0);
	int nRes = CKTCadUtility::SelectEntity(_T("\n请选择设备或桥架添加接线点:"), ent, pRb, pt);
	if (nRes == RTNORM)
	{
		AcGePoint3d ptOn, ptMid;
		bool bIsEqu = false;
		CString sEqu1,sEqu2,sEqu;
		AcDbObjectId id;
		acdbGetObjectId(id, ent);
		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
		{
			AecDbEwEquipment *pEqu = AecDbEwEquipment::cast(pEnt);
			if (pEqu != NULL)
			{
				acdbUcs2Wcs(pt, pt2, false);
				ptOn = asPnt3d(pt2);
				pEqu->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NO, sEqu1);
				pEqu->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NAME,sEqu2);
				bIsEqu = true;
			}

			AecDbECableTray *pTray = AecDbECableTray::cast(pEnt);
			if (pTray != NULL)
			{
				pTray->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NO, sEqu1);
				pTray->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NAME, sEqu2);

				acdbUcs2Wcs(pt, pt2, false);
				pTray->getClosestPointTo(asPnt3d(pt2), ptOn, false);
			}

			AecDbEcFitting *pEcFit = AecDbEcFitting::cast(pEnt);
			if (pEcFit != NULL)
			{
				pEcFit->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NO, sEqu1);
				pEcFit->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NAME, sEqu2);
				pEcFit->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_MID, ptMid);
				acdbUcs2Wcs(pt, pt2, false);
				AcArray<AecInterface> arInfs;
				pEcFit->GetInterface(arInfs);

				GetClosestPointToEcFit(asPnt3d(pt2), ptMid,arInfs, ptOn);
			}

			pEnt->close();
		}

		sEqu.Format(_T("%s_%s"),sEqu1,sEqu2);
		CAcModuleResourceOverride myResources;
		CXYCDDlg dlg;
		dlg.m_dEl = ptOn.z;
		dlg.m_sEqu = sEqu;
		if (IDOK == dlg.DoModal())
		{
			ads_point pt1;
			acdbUcs2Wcs(dlg.m_pt, pt1, false);
			pt1[Z] = dlg.m_dEl;

			TCHAR szHd[17];
			id.handle().getIntoAsciiBuffer(szHd);

			//创建一个
			AcDbObjectId idLay = KTSetting::InitLayer(LAY_CABTRY_OUT);
			AecDbDirPosition *pDirPt = new AecDbDirPosition;
			pDirPt->SetPosition(asPnt3d(pt1));
			pDirPt->SetSys(dlg.m_sSys);
			pDirPt->SetOnEqu(dlg.m_sEqu);
			pDirPt->SetIsEqu(bIsEqu);
			pDirPt->SetAssocEnt(szHd);

			pDirPt->setLayer(idLay);
			AcDbObjectId idPt = CoreTools::AddToModelSpace(pDirPt);
		}
	}
}

void DBL_AEC_DIRPS()
{
	AcDbObjectId id;
	bool bIsOk = GetDoubleClickEnt(_T("DBL_AEC_DIRPS"), id);

	if (bIsOk && id.isValid())
	{
		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
		{
			AecDbDirPosition *pDirPt = AecDbDirPosition::cast(pEnt);
			if (pDirPt != NULL)
			{
				CAcModuleResourceOverride myResources;

				CXYCDDlg dlg;
				AcGePoint3d ptOn;

				ptOn = pDirPt->GetPosition();
				dlg.m_dEl = ptOn.z;
				dlg.m_sPt.Format(_T("%.3f,%.3f,%.3f"),ptOn.x,ptOn.y,ptOn.z);
				pDirPt->GetSys(dlg.m_sSys);
				pDirPt->GetOnEqu(dlg.m_sEqu);
				
				if (IDOK == dlg.DoModal())
				{
					pDirPt->SetPosition(ptOn);
					pDirPt->SetSys(dlg.m_sSys);
					pDirPt->SetOnEqu(dlg.m_sEqu);
				}
			}
			pEnt->close();
		}
	}
}

//设备统编
CSBTBDlg g_wndSBTBDlg;
void EL_SBTBCmdFnc()
{
	if (!IsWindow(g_wndSBTBDlg.m_hWnd))
	{
		CAcModuleResourceOverride myResources;
		g_wndSBTBDlg.Create(CSBTBDlg::IDD);
		g_wndSBTBDlg.CenterWindow();
		g_wndSBTBDlg.ShowWindow(SW_SHOW);
	}
	else
	{
		g_wndSBTBDlg.ShowWindow(SW_SHOW);
	}
}

//必经路径
void EL_BJLJCmdFnc()
{
	//移到清册起始设备选择上
	//移到手动敷设起始设备选择上
	//....
}

//清册敷设
CDLFSDlg g_wndDLFSDlg;
void EL_DLFSCmdFnc()
{
	if (!IsWindow(g_wndDLFSDlg.m_hWnd))
	{
		CAcModuleResourceOverride myResources;
		g_wndDLFSDlg.Create(CDLFSDlg::IDD);
		g_wndDLFSDlg.CenterWindow();
		g_wndDLFSDlg.ShowWindow(SW_SHOW);
	}
	else
	{
		g_wndDLFSDlg.ShowWindow(SW_SHOW);
	}
}

//手动敷设
CSDFSDlg *g_pSDlg = NULL;
CAutoWndDel autoDel0;
void EL_SDFSCmdFnc()
{
	//弹出界面
	if (g_pSDlg == NULL)
	{
		g_pSDlg = new CSDFSDlg;
		autoDel0.m_pWnd = g_pSDlg;
	}

	if ( !IsWindow(g_pSDlg->m_hWnd) )
	{
		CAcModuleResourceOverride myResources;
		g_pSDlg->Create(CSDFSDlg::IDD);
	}
	g_pSDlg->ShowWindow(SW_SHOW);
	g_pSDlg->CenterWindow();
}

void EL_XTCLCmdFnc()
{
	int nShow = 0;
	int nRes = acedGetInt(_T("\n请输入选项[显示填充率(1)/关闭填充率(0)]<0>:"), &nShow);
	
	struct resbuf rb,rb2;
	rb.resval.rint = 0;
	acedGetVar(_T("USERI3"), &rb);
	acedGetVar(_T("USERI3"), &rb2);

	if (nShow > 0)
	{
		rb2.resval.rint = 1395;
		acedSetVar(_T("USERI3"), &rb2);
	}
	else
	{
		rb2.resval.rint = 0;
		acedSetVar(_T("USERI3"), &rb2);
	}
	acedPostCommand(_T("regen "));
}

void EL_LTCLCmdFnc()
{
	ads_name ss, ent;
	struct resbuf *pRb = acutBuildList(RTDXF0, DXF_PIPE_FIT, 0);
	int nRes = acedSSGet(_T("A"), NULL, NULL, pRb, ss);
	if (nRes == RTNORM)
	{
		AcDbObjectId id;
		AcDbEntity *pEnt = NULL;

		Adesk::Int32 nLen = 0;
		acedSSLength(ss, &nLen);
		
		for (int i = 0;i < nLen;i++)
		{
			acedSSName(ss, i, ent);
			acdbGetObjectId(id, ent);

			if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
			{
				AecDbECableTray *pTray = AecDbECableTray::cast(pEnt);
				if (pTray != NULL)
				{
					pTray->GetSpecialtyData(AcDb::kForWrite)->SetAt(KEY_FILLUSED, 0.0);
					pTray->GetSpecialtyData(AcDb::kForWrite)->SetAt(KEY_FILLUSED2, 0.0);
				}

				AecDbEcFitting *pEcFit = AecDbEcFitting::cast(pEnt);
				if (pEcFit != NULL)
				{
					pEcFit->GetSpecialtyData(AcDb::kForWrite)->SetAt(KEY_FILLUSED, 0.0);
					pEcFit->GetSpecialtyData(AcDb::kForWrite)->SetAt(KEY_FILLUSED2, 0.0);
				}

				pEnt->close();
			}
		}

		acedSSFree(ss);
	}
}

#define DXF_CABPATH _T("AEC_ROADAXISLINE")

//敷设汇总--报表
void EL_FSHZCmdFnc()
{
	//汇总列,模板
	CString sSysPath = FilePath::GetSysDir();
	CString sIniFile, sXlsFile;
	sIniFile.Format(_T("%s\\%s"), sSysPath, _T("电缆汇总.ini"));

	CFileFind find;
	if (find.FindFile(sIniFile))
	{
		/*
		* A = 序号
		B = 电缆及规格
		C = 截面
		D = 全长
		E = 电缆外径
		F = 电缆系统
		G = 备注
		*/
		CString sTip;
		TCHAR szVal[MAX_PATH];
		memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);

		if (0 == ::GetPrivateProfileString(_T("File"), _T("Templ"), _T(""), szVal, MAX_PATH, sIniFile))
			return;

		sXlsFile.Format(_T("%s\\%s"), sSysPath, szVal);
		if (!find.FindFile(sXlsFile))
		{
			sTip.Format(_T("汇总模板文件[%s]不存在!"), sXlsFile);
			AfxMessageBox(sTip);
			return;
		}

		memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);
		if (0 == ::GetPrivateProfileString(_T("Row"), _T("RowFrom"), _T(""), szVal, MAX_PATH, sIniFile))
			return;

		int nRowFrom = _ttoi(szVal);

		memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);
		if (0 == ::GetPrivateProfileString(_T("Row"), _T("Cells"), _T(""), szVal, MAX_PATH, sIniFile))
			return;

		//继续读 cells
		CStringArray arCells;
		CoreTools::SplitStrintToArray(szVal, arCells, _T(','));

		//写入的位置
		CString sCell, sName, sTitle;
		CMapStringToString mapCellToName;
		for (int i = 0; i < arCells.GetSize(); i++)
		{
			sCell = arCells.GetAt(i);

			memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);
			if (0 == ::GetPrivateProfileString(_T("Cell"), sCell, _T(""), szVal, MAX_PATH, sIniFile))
				return;

			mapCellToName.SetAt(sCell, szVal);
		}

		int nUnit = 1000;//默认毫米
		struct resbuf rb;
		acedGetVar(_T("INSUNITS"), &rb);
		if (rb.resval.rint == AcDb::kUnitsMeters)
		{
			nUnit = 1;
		}

		std::vector < CableSum > vtCableSumms;
		CableSum cabData;
		memset(&cabData, 0, sizeof(CableSum));

		//选择所有电缆
		ads_name ss, ent;
		AcDbObjectId id;
		AcDbEntity *pEnt = NULL;

		struct resbuf *pRb = acutBuildList(RTDXF0, DXF_CABPATH, 0);
		int nRet = acedSSGet(_T("A"), NULL, NULL, pRb,ss);
		acutRelRb(pRb);

		Adesk::Int32 nLen = 0;
		if (nRet == RTNORM)
		{
			acedSSLength(ss, &nLen);

			for (int i = 0;i < nLen;i++)
			{
				acedSSName(ss, i, ent);
				acdbGetObjectId(id, ent);

				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
				{
					AecDb3dRoadAxisLine *pRd = AecDb3dRoadAxisLine::cast(pEnt);
					AecDbObjXDataMap xData;
					if (xData.Read(pEnt, KEY_APP))
					{
						xData.GetAt(KEY_SPEC, cabData.szSpec);
						xData.GetAt(KEY_SYS, cabData.szSys);
						xData.GetAt(KEY_SECNAME, cabData.szSect);
						xData.GetAt(PIPE_OD, cabData.dOD);
						cabData.dLen = pRd->getLength();
						cabData.dLen /= nUnit;
						vtCableSumms.push_back(cabData);
					}

					pEnt->close();
				}
			}
			acedSSFree(ss);
		}

		if (nLen == 0)
		{
			acutPrintf(_T("\n图中没有电缆实体!不需要汇总!"));
			return;
		}


		CString sSpec, sSect, sSys, sOD, sLen, sKey;
		CableSum *pData = NULL;
		CMapStringToPtr mapSumm2Data;
		std::vector<CableSum *> vtCableSumPtrs;

		acedSetStatusBarProgressMeter(_T("正在汇总..."), 0, vtCableSumms.size());
		for (int i = 0;i < vtCableSumms.size();i++)
		{
			acedSetStatusBarProgressMeterPos(i);
			CableSum &data = vtCableSumms.at(i);

			sKey.Format(_T("%s-%s"), data.szSpec, data.szSect);
			if (mapSumm2Data.Lookup(sKey, (void *&)pData))
			{
				//汇总
				pData->dLen += data.dLen;
			}
			else
			{
				pData = new CableSum;
				memcpy(pData, &data, sizeof(CableSum));

				mapSumm2Data.SetAt(sKey, pData);
				vtCableSumPtrs.push_back(pData);
			}
		}
		acedRestoreStatusBar();

		//std::sort(vtCableSumPtrs.begin(), vtCableSumPtrs.end(), CableSumCmpFnc);
		//...

		CWaitCursor wait;

		::CoInitialize(NULL);

		_Application excelApp;
		Workbooks excelBooks;
		_Workbook excelBook;
		Worksheets excelSheets;
		_Worksheet excelSheet;

		COleVariant vResult;
		COleVariant covTrue((short)TRUE), covFalse((short)FALSE);

		Range range;
		Range iCell;
		Validation vald;

		BOOL bSuccess = excelApp.CreateDispatch(_T("excel.application"));
		if (bSuccess)
		{
			LPDISPATCH pLpDisp = NULL;

			excelBooks.AttachDispatch(excelApp.GetWorkbooks());

			COleVariant vOp((long)DISP_E_PARAMNOTFOUND, VT_ERROR);

			COleVariant vResult;
			COleVariant covTrue((short)TRUE), covFalse((short)FALSE);
			COleVariant covOptional((long)DISP_E_PARAMNOTFOUND, VT_ERROR);

			pLpDisp = excelBooks.Open(sXlsFile, covOptional, covOptional, covOptional,
				covOptional, covOptional, covOptional, covOptional,
				covOptional, covOptional, covOptional, covOptional,
				covOptional);

			if (pLpDisp == NULL)
			{
				AfxMessageBox(_T("启动excel 服务失败!请确认系统是否安装Excel!"));
				return;
			}

			excelBook.AttachDispatch(pLpDisp);

			//得到Worksheets 
			excelSheets.AttachDispatch(excelBook.GetWorksheets());

			//获取sheet 数量
			bool bModified = false;
			short nSheetIndex = 1;

			COleVariant varIndex(nSheetIndex);
			pLpDisp = excelSheets.GetItem(varIndex);
			if (pLpDisp != NULL)
			{
				excelSheet.AttachDispatch(pLpDisp);

				CUIntArray arAZPos;
				CString sCell, sVal, sKey, sItem;

				int nRow = nRowFrom;

				//
				for (int i = 0; i < vtCableSumPtrs.size(); i++)
				{
					pData = vtCableSumPtrs.at(i);

					for (POSITION ps = mapCellToName.GetStartPosition(); ps != NULL;)
					{
						mapCellToName.GetNextAssoc(ps, sKey, sName);

						/*
							* A = 序号
							B = 电缆及规格
							C = 截面
							D = 全长
							E = 电缆外径
							F = 电缆系统
							G = 备注
							*/

							//CableSum 的 文本 涵盖 sName

							//电缆及规格
						if (sName.Find(_T("电缆及规格")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(pData->szSpec);
							range.SetValue(varVal);
							continue;
						}

						//截面
						if (sName.Find(_T("截面")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(pData->szSect);
							range.SetValue(varVal);
							continue;
						}

						//电缆系统
						if (sName.Find(_T("电缆系统")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(pData->szSys);
							range.SetValue(varVal);
							continue;
						}

						//电缆外径
						if (sName.Find(_T("电缆外径")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(pData->dOD);
							range.SetValue(varVal);
							continue;
						}

						//全长
						if (sName.Find(_T("全长")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(pData->dLen);
							range.SetValue(varVal);
							continue;
						}

						//序号
						if (sName.Find(_T("序号")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal((long)(nRow - nRowFrom + 1));
							range.SetValue(varVal);
							continue;
						}

						//...
					}

					nRow += 1;
				}
				bModified = TRUE;
			}

			CString sSaveAsFileName = sXlsFile;
			if (bModified)
			{
				//另外保存新文件

				//年月 日 分 秒 文件记录
				CString sAdd;
				CTime tNow = CTime::GetCurrentTime();
				sAdd = tNow.Format("_%Y-%m-%d_%H.%M.%S");
				sAdd += _T(".xls");

				sSaveAsFileName.MakeLower();

				if (sSaveAsFileName.Find(_T(".xlsx")) != -1)
					sSaveAsFileName.Replace(_T(".xlsx"), sAdd);
				else
					sSaveAsFileName.Replace(_T(".xls"), sAdd);

				COleVariant varNewEFile(sSaveAsFileName);
				excelBook.SaveAs(varNewEFile, covOptional, covOptional, covOptional,
					covOptional, covOptional, 0, covOptional, covOptional,
					covOptional, covOptional);
			}

			excelBooks.Close();
			excelApp.Quit();

			//open
			if (bModified)
			{
				ShellExecute(AfxGetMainWnd()->m_hWnd, _T("open"), sSaveAsFileName, _T(""), _T(""), SW_SHOWNORMAL);
			}
		}
	}
}

static bool CableSummSort(CableSum& cls1, CableSum& cls2)
{
	if (cls1.dOD <= cls2.dOD)
		return true;
	return false;
}

static void GetEquNameFromHd(TCHAR* szHd)
{
	AcDbHandle hd(szHd);

	AcDbObjectId id;
	if (Acad::eOk == acdbCurDwg()->getAcDbObjectId(id, false, hd))
	{
		AcDbEntity *pEnt = NULL;
		if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
		{
			// AEC_DBWEQUIPMENT
			AecDbEwEquipment *pEqu = AecDbEwEquipment::cast(pEnt);
			if (pEqu != NULL)
			{
				CString sNo = _T(""), sName = _T(""), sTmp;
				pEqu->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NO,sNo);
				pEqu->GetSpecialtyData(AcDb::kForRead)->GetAt(KEY_NAME, sName);

				sTmp = sName + sNo;
				_tcscpy(szHd, (LPCTSTR)sTmp);
			}
			pEnt->close();
		}
	}
}

void EL_TQQCCmdFnc()
{
	//汇总列,模板
	CString sSysPath = FilePath::GetSysDir();
	CString sIniFile, sXlsFile;
	sIniFile.Format(_T("%s\\%s"), sSysPath, _T("电缆敷设清单.ini"));

	CFileFind find;
	if (find.FindFile(sIniFile))
	{
		/*
		A = 序号
		B = 起点设备
		C = 终点设备
		D = 电缆及规格
		E = 截面
		F = 全长
		G = 电缆外径
		H = 电缆系统
		I = 备注
		*/
		CString sTip;
		TCHAR szVal[MAX_PATH];
		memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);

		if (0 == ::GetPrivateProfileString(_T("File"), _T("Templ"), _T(""), szVal, MAX_PATH, sIniFile))
			return;

		sXlsFile.Format(_T("%s\\%s"), sSysPath, szVal);
		if (!find.FindFile(sXlsFile))
		{
			sTip.Format(_T("电缆敷设清单[%s]不存在!"), sXlsFile);
			AfxMessageBox(sTip);
			return;
		}

		memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);
		if (0 == ::GetPrivateProfileString(_T("Row"), _T("RowFrom"), _T(""), szVal, MAX_PATH, sIniFile))
			return;

		int nRowFrom = _ttoi(szVal);

		memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);
		if (0 == ::GetPrivateProfileString(_T("Row"), _T("Cells"), _T(""), szVal, MAX_PATH, sIniFile))
			return;

		//继续读 cells
		CStringArray arCells;
		CoreTools::SplitStrintToArray(szVal, arCells, _T(','));

		//写入的位置
		CString sCell, sName, sTitle;
		CMapStringToString mapCellToName;
		for (int i = 0; i < arCells.GetSize(); i++)
		{
			sCell = arCells.GetAt(i);

			memset(szVal, 0, sizeof(TCHAR) * MAX_PATH);
			if (0 == ::GetPrivateProfileString(_T("Cell"), sCell, _T(""), szVal, MAX_PATH, sIniFile))
				return;

			mapCellToName.SetAt(sCell, szVal);
		}

		int nUnit = 1000;//默认毫米
		struct resbuf rb;
		acedGetVar(_T("INSUNITS"), &rb);
		if (rb.resval.rint == AcDb::kUnitsMeters)
		{
			nUnit = 1;
		}

		std::vector < CableSum > vtCableSumms;
		CableSum cabData;
		memset(&cabData, 0, sizeof(CableSum));

		//选择所有电缆
		ads_name ss, ent;
		AcDbObjectId id;
		AcDbEntity *pEnt = NULL;

		struct resbuf *pRb = acutBuildList(RTDXF0, DXF_CABPATH, 0);
		int nRet = acedSSGet(_T("A"), NULL, NULL, pRb, ss);
		acutRelRb(pRb);
		//acrxClassDictionary
		Adesk::Int32 nLen = 0;
		if (nRet == RTNORM)
		{
			acedSSLength(ss, &nLen);

			for (int i = 0; i < nLen; i++)
			{
				acedSSName(ss, i, ent);
				acdbGetObjectId(id, ent);

				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForRead))
				{
					AecDb3dRoadAxisLine *pRd = AecDb3dRoadAxisLine::cast(pEnt);
					AecDbObjXDataMap xData;
					if (xData.Read(pEnt, KEY_APP))
					{
						memset(&cabData, 0, sizeof(CableSum));

						xData.GetAt(KEY_START, cabData.szFr);
						xData.GetAt(KEY_END, cabData.szTo);

						GetEquNameFromHd(cabData.szFr);
						GetEquNameFromHd(cabData.szTo);

						xData.GetAt(KEY_SPEC, cabData.szSpec);
						xData.GetAt(KEY_SYS, cabData.szSys);
						xData.GetAt(KEY_SECNAME, cabData.szSect);
						xData.GetAt(PIPE_OD, cabData.dOD);
						cabData.dLen = pRd->getLength();
						cabData.dLen /= nUnit;
						vtCableSumms.push_back(cabData);
					}

					pEnt->close();
				}
			}
			acedSSFree(ss);
		}

		if (nLen == 0)
		{
			acutPrintf(_T("\n图中没有电缆实体!不需要汇总!"));
			return;
		}

		//按照外径排序
		std::sort(vtCableSumms.begin(), vtCableSumms.end(), CableSummSort);

		CWaitCursor wait;

		::CoInitialize(NULL);

		_Application excelApp;
		Workbooks excelBooks;
		_Workbook excelBook;
		Worksheets excelSheets;
		_Worksheet excelSheet;

		COleVariant vResult;
		COleVariant covTrue((short)TRUE), covFalse((short)FALSE);

		Range range;
		Range iCell;
		Validation vald;

		BOOL bSuccess = excelApp.CreateDispatch(_T("excel.application"));
		if (bSuccess)
		{
			LPDISPATCH pLpDisp = NULL;

			excelBooks.AttachDispatch(excelApp.GetWorkbooks());

			COleVariant vOp((long)DISP_E_PARAMNOTFOUND, VT_ERROR);

			COleVariant vResult;
			COleVariant covTrue((short)TRUE), covFalse((short)FALSE);
			COleVariant covOptional((long)DISP_E_PARAMNOTFOUND, VT_ERROR);

			pLpDisp = excelBooks.Open(sXlsFile, covOptional, covOptional, covOptional,
				covOptional, covOptional, covOptional, covOptional,
				covOptional, covOptional, covOptional, covOptional,
				covOptional);

			if (pLpDisp == NULL)
			{
				AfxMessageBox(_T("启动excel 服务失败!请确认系统是否安装Excel!"));
				return;
			}

			excelBook.AttachDispatch(pLpDisp);

			//得到Worksheets 
			excelSheets.AttachDispatch(excelBook.GetWorksheets());

			//获取sheet 数量
			bool bModified = false;
			short nSheetIndex = 1;

			COleVariant varIndex(nSheetIndex);
			pLpDisp = excelSheets.GetItem(varIndex);
			if (pLpDisp != NULL)
			{
				excelSheet.AttachDispatch(pLpDisp);

				CUIntArray arAZPos;
				CString sCell, sVal, sKey, sItem;

				int nRow = nRowFrom;

				//
				for (int i = 0; i < vtCableSumms.size(); i++)
				{
					CableSum& data = vtCableSumms.at(i);

					for (POSITION ps = mapCellToName.GetStartPosition(); ps != NULL;)
					{
						mapCellToName.GetNextAssoc(ps, sKey, sName);

						/*
						A = 序号
						B = 起点设备
						C = 终点设备
						D = 电缆及规格
						E = 截面
						F = 全长
						G = 电缆外径
						H = 电缆系统
						I = 备注
						*/

						//CableSum 的 文本 涵盖 sName

						if (sName.Find(_T("起点设备")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(data.szFr);
							range.SetValue(varVal);
							continue;
						}

						if (sName.Find(_T("终点设备")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(data.szTo);
							range.SetValue(varVal);
							continue;
						}

						//电缆及规格
						if (sName.Find(_T("电缆及规格")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(data.szSpec);
							range.SetValue(varVal);
							continue;
						}

						//截面
						if (sName.Find(_T("截面")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(data.szSect);
							range.SetValue(varVal);
							continue;
						}

						//电缆系统
						if (sName.Find(_T("电缆系统")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(data.szSys);
							range.SetValue(varVal);
							continue;
						}

						//电缆外径
						if (sName.Find(_T("电缆外径")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(data.dOD);
							range.SetValue(varVal);
							continue;
						}

						//全长
						if (sName.Find(_T("全长")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal(data.dLen);
							range.SetValue(varVal);
							continue;
						}

						//序号
						if (sName.Find(_T("序号")) != -1)
						{
							//A1 B1 C1
							sCell.Format(_T("%s%d"), sKey, nRow);

							COleVariant varCell(sCell);
							range = excelSheet.GetRange(varCell, varCell);

							COleVariant varVal((long)(nRow - nRowFrom + 1));
							range.SetValue(varVal);
							continue;
						}

						//...
					}

					nRow += 1;
				}
				bModified = TRUE;
			}

			CString sSaveAsFileName = sXlsFile;
			if (bModified)
			{
				//年月 日 分 秒 文件记录
				CString sAdd;
				CTime tNow = CTime::GetCurrentTime();
				sAdd = tNow.Format("_%Y-%m-%d_%H.%M.%S");
				sAdd += _T(".xls");

				sSaveAsFileName.MakeLower();

				if (sSaveAsFileName.Find(_T(".xlsx")) != -1)
					sSaveAsFileName.Replace(_T(".xlsx"), sAdd);
				else
					sSaveAsFileName.Replace(_T(".xls"), sAdd);

				COleVariant varNewEFile(sSaveAsFileName);
				excelBook.SaveAs(varNewEFile, covOptional, covOptional, covOptional,
					covOptional, covOptional, 0, covOptional, covOptional,
					covOptional, covOptional);
			}

			excelBooks.Close();
			excelApp.Quit();

			//open
			if (bModified)
			{
				ShellExecute(AfxGetMainWnd()->m_hWnd, _T("open"), sSaveAsFileName, _T(""), _T(""), SW_SHOWNORMAL);
			}
		}
	}
}

CDLCKDLG *g_pDlckDlg = NULL;
CAutoWndDel autoDel1;
void EL_DLCKCmdFnc()
{
	//弹出截面,显示电缆,非模式
	if (g_pDlckDlg == NULL)
	{
		g_pDlckDlg = new CDLCKDLG;
		autoDel1.m_pWnd = g_pDlckDlg;
	}

	if (!IsWindow(g_pDlckDlg->m_hWnd))
	{
		CAcModuleResourceOverride myResources;
		g_pDlckDlg->Create(CDLCKDLG::IDD);
	}
	g_pDlckDlg->ShowAllCables();
	g_pDlckDlg->ShowWindow(SW_SHOW);
	g_pDlckDlg->CenterWindow();
}

//设备编码
CSBBMDlg *g_pSBBMDlg = NULL;
CAutoWndDel autoDel2;
void EL_SBBMCmdFnc()
{
	//...
	//弹出截面,显示电缆,非模式
	if (g_pSBBMDlg == NULL)
	{
		g_pSBBMDlg = new CSBBMDlg;
		autoDel2.m_pWnd = g_pSBBMDlg;
	}

	if (!IsWindow(g_pSBBMDlg->m_hWnd))
	{
		CAcModuleResourceOverride myResources;
		g_pSBBMDlg->Create(CSBBMDlg::IDD);
	}
	g_pSBBMDlg->ShowAllEqus();
	g_pSBBMDlg->ShowWindow(SW_SHOW);
	g_pSBBMDlg->CenterWindow();
}

void EL_ZJXGCmdFnc()
{
	ads_point pt1, pt2;
	int nRes = acedGetPoint(NULL,_T("\n请在桥架上选择出口引出点:"),pt1);
	if (nRes == RTNORM)
	{
		nRes = acedGetPoint(pt1, _T("\n请选择电气设备的接线点:"), pt2);
		if (nRes == RTNORM)
		{
			ads_point pt11, pt22;
			acdbUcs2Wcs(pt1, pt11, false);
			acdbUcs2Wcs(pt2, pt22, false);

			CAcModuleResourceOverride myResources;
			CHZXGDlg dlg;
			dlg.SetSelectRoad(FALSE);

			if (IDOK == dlg.DoModal())
			{
				XGPipeData data;
				memset(&data, 0, sizeof(XGPipeData));

				if (dlg.GetXGPipeData(data))
				{
					AcDbLine *pLn1 = new AcDbLine(asPnt3d(pt11), AcGePoint3d(pt11[X], pt11[Y], pt22[Z]));
					AecDb3dRoadAxisLine *pRd = new AecDb3dRoadAxisLine;
					pRd->AppendCurveSeg(pLn1);
					delete pLn1;

					AcDbLine *pLn2 = new AcDbLine(AcGePoint3d(pt11[X], pt11[Y], pt22[Z]), asPnt3d(pt22));
					pRd->AppendCurveSeg(pLn2);
					delete pLn2;

					double dRatio = data.dDR / data.dOD;
					pRd->SaveDandRatio(data.dOD, dRatio);
					//pRd->Create3dRoadAxisLine(data.dOD, dRatio);

					AecDbEwFlexiblePipe *pFlexiblePipe = new AecDbEwFlexiblePipe;
					pFlexiblePipe->SetBaseCurve(pRd);
					pFlexiblePipe->SetSection(data.dOD, data.dt);//

					pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_NAME, data.szPName);
					pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_MATERIAL, data.szMaterial);
					pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_D, data.dOD);
					pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_THICK, data.dt);
					pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_DN, data.dDN);
					pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_RATIO, dRatio);
					pFlexiblePipe->GetSpecialtyData()->SetAt(PID_PIPE_DTEMPER, data.szWorkTmp);
					pFlexiblePipe->GetSpecialtyData()->SetAt(PID_PIPE_DPRESS, data.dt);
					pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FLAMER, data.szFlameR);
					pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_TM, data.szTM);
					pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_Model, data.szModel);
					pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_STRUF, data.szStruF);
					pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FACTORY, data.szProvider);

					AcDbObjectId idPipe = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
					pFlexiblePipe->setLayer(idPipe);

					CoreTools::AddToModelSpace(pFlexiblePipe);
				}
			}
		}
	}
}

//绘制线管
void EL_HZXGCmdFnc()
{
	CAcModuleResourceOverride myResources;
	CHZXGDlg dlg;
	dlg.SetSelectRoad(TRUE);
	if (IDOK == dlg.DoModal())
	{
		XGPipeData data;
		memset(&data, 0, sizeof(XGPipeData));
		if (dlg.GetXGPipeData(data))
		{
			double dRatio = data.dDR / data.dOD;
			AcDbEntity *pEnt = NULL;

			//如果界面中选择了路径 id;
			AcDbObjectId idPath;
			if (dlg.GetSelectRoad(idPath))
			{
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, idPath, AcDb::kForWrite))
				{
					AecDb3dRoadAxisLine *pRoadCln = NULL;
					AcDbLine *pLn = AcDbLine::cast(pEnt);
					AcDbPolyline *pPl = AcDbPolyline::cast(pEnt);
					if (pLn != NULL || pPl != NULL)
					{
						AcDbCurve *pCurve = AcDbCurve::cast(pEnt);
						pRoadCln = new AecDb3dRoadAxisLine;
						pRoadCln->AppendCurveSeg(pCurve);
					}

					AecDb3dRoadAxisLine *pRoad = AecDb3dRoadAxisLine::cast(pEnt);
					if (pRoad != NULL)
					{
						pRoadCln = (AecDb3dRoadAxisLine *)pRoad->clone();
					}

					if (pRoadCln != NULL)
					{
						pRoadCln->SaveDandRatio(data.dOD, dRatio);
						//pRoadCln->Create3dRoadAxisLine(data.dOD, dRatio);

						AecDbEwFlexiblePipe *pFlexiblePipe = new AecDbEwFlexiblePipe;
						pFlexiblePipe->SetBaseCurve(pRoadCln);
						pFlexiblePipe->SetSection(data.dOD, data.dt);//

						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_NAME, data.szPName);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_MATERIAL, data.szMaterial);
						pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_D, data.dOD);
						pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_THICK, data.dt);
						pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_DN, data.dDN);
						pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_RATIO, dRatio);
						pFlexiblePipe->GetSpecialtyData()->SetAt(PID_PIPE_DTEMPER, data.szWorkTmp);
						pFlexiblePipe->GetSpecialtyData()->SetAt(PID_PIPE_DPRESS, data.dt);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FLAMER, data.szFlameR);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_TM, data.szTM);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_Model, data.szModel);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_STRUF, data.szStruF);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FACTORY, data.szProvider);

						AcDbObjectId idPipe = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
						pFlexiblePipe->setLayer(idPipe);

						CoreTools::AddToModelSpace(pFlexiblePipe);
						delete pRoadCln;
					}
					pEnt->erase();
					pEnt->close();
				}
				return;
			}

			AcPolylineJig jig;
			jig.InitStatusRecsFor3dRoadAxisLine();
			if (jig.DoIt())
			{
				AcDbObjectId id = jig.GetRoadAxisLineId();
				if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
				{
					AecDb3dRoadAxisLine *pRoadAxLn = AecDb3dRoadAxisLine::cast(pEnt);
					if (pRoadAxLn != NULL)
					{
						pRoadAxLn->SaveDandRatio(data.dOD, dRatio);
						//pRoadAxLn->Create3dRoadAxisLine(data.dOD, dRatio);

						AecDb3dRoadAxisLine *pRoadAxLnCln = (AecDb3dRoadAxisLine *)pRoadAxLn->clone();
						if (pRoadAxLnCln != NULL)
						{
							AecDbEwFlexiblePipe *pFlexiblePipe = new AecDbEwFlexiblePipe;
							pFlexiblePipe->SetBaseCurve(pRoadAxLnCln);
							pFlexiblePipe->SetSection(data.dOD, data.dt);//

							pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_NAME, data.szPName);
							pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_MATERIAL, data.szMaterial);
							pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_D, data.dOD);
							pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_THICK, data.dt);
							pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_DN, data.dDN);
							pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_RATIO, dRatio);
							pFlexiblePipe->GetSpecialtyData()->SetAt(PID_PIPE_DTEMPER, data.szWorkTmp);
							pFlexiblePipe->GetSpecialtyData()->SetAt(PID_PIPE_DPRESS, data.dt);
							pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FLAMER, data.szFlameR);
							pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_TM, data.szTM);
							pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_Model, data.szModel);
							pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_STRUF, data.szStruF);
							pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FACTORY, data.szProvider);

							AcDbObjectId idPipe = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
							pFlexiblePipe->setLayer(idPipe);

							CoreTools::AddToModelSpace(pFlexiblePipe);
							delete pRoadAxLnCln;
						}
					}
					pEnt->erase();
					pEnt->close();
				}
			}
		}
	}
}

//多层线管
void EL_DCXGCmdFnc()
{

}

//放接线盒
void EL_FJXHCmdFnc()
{

}

//放置开关
void EL_FZKGCmdFnc()
{

}

//放置灯具
void EL_FZDJCmdFnc()
{

}

namespace
{
	AcDbRegion* makeCircleRegion(const AcGePoint3d& ptOrg
		, const AcGeVector3d& vtZ
		, const double& dR)
	{
		AcDbCircle* pCir(new AcDbCircle(ptOrg, vtZ, dR));
		if (!pCir)
		{
			return NULL;
		}
		return CoreTools::createRegion(pCir);
	}

	AcDbRegion* makeRectRegion(const AcGePoint3d& ptOrg
		, const double& dL
		, const double& dW
		, const AcGeVector3d& vecL
		, const AcGeVector3d& vecW)
	{
		AcGePoint3d ptGe[4];

		ptGe[0] = ptOrg + vecW * dW * .5;
		ptGe[0] += vecL * dL * .5;
		ptGe[1] = ptGe[0] - vecW * dW;
		ptGe[2] = ptGe[1] - vecL * dL;
		ptGe[3] = ptGe[2] + vecW * dW;

		AcDbVoidPtrArray ar;
		ar.append(new AcDbLine(ptGe[0], ptGe[1]));
		ar.append(new AcDbLine(ptGe[1], ptGe[2]));
		ar.append(new AcDbLine(ptGe[2], ptGe[3]));
		ar.append(new AcDbLine(ptGe[3], ptGe[0]));
		AcDbRegion* pReg = CoreTools::createRegion(ar);
		deleteArrayVoidPtrs< AcDbLine>(ar);
		if (!pReg)
		{
			return NULL;
		}
		return pReg;
	}

	template <typename T>
	void setData(AecEqui::XPrimData* pXPData, void* pData)
	{
		pXPData->m_nID = ::_time32(NULL);
		switch (pXPData->m_eType)
		{
		case AecEqui::kExtrude:
		case AecEqui::kRevolve:
			pXPData->m_nSize = ((AecEqui::XBuffer*)pData)->nSize;
			if (pXPData->m_nSize > 0)
			{
				pXPData->m_pData = new byte[pXPData->m_nSize];
				::memcpy(pXPData->m_pData, ((AecEqui::XBuffer*)pData)->pData, pXPData->m_nSize);
			}
			break;
		default:
			pXPData->m_pData = new T;
			::memcpy(pXPData->m_pData, pData, sizeof(T));
			pXPData->m_nSize = sizeof(T);
			break;
		}
	}

	void clearData(AecEqui::XPrimData& data)
	{
		data.releaseData();
		return;
	}

	void swap(AcGePoint3d& ptA, AcGePoint3d& ptB)
	{
		AcGePoint3d ptT = ptA;
		ptA = ptB;
		ptB = ptT;
		return;
	}
}

//参见资源图片 IDB_BITMAP3/4/5
//绘避雷网
void EL_HBLWCmdFnc()
{
	CAcModuleResourceOverride myResources;
	CHBLWDlg dlg;
	if (IDOK == dlg.DoModal())
	{
		AcPolylineJig jig;
		jig.InitStatusRecsForLineSegs();
		if (jig.DoIt())
		{
			AcDbObjectId id = jig.GetRoadAxisLineId();
			AcDbEntity* pEnt = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
			{
				AecDb3dRoadAxisLine* pRoadAxLn = AecDb3dRoadAxisLine::cast(pEnt);
				if (pRoadAxLn != NULL)
				{
					pRoadAxLn->Create3dRoadAxisLine(dlg.m_dL, 0);

					AecDb3dRoadAxisLine* pRoadAxLnCln = (AecDb3dRoadAxisLine*)pRoadAxLn->clone();
					if (pRoadAxLnCln != NULL)
					{
						AecDbEwFlexiblePipe* pFlexiblePipe = new AecDbEwFlexiblePipe;
						pFlexiblePipe->SetBaseCurve(pRoadAxLnCln);
						pFlexiblePipe->SetStartElevation(dlg.m_dBomH);
						pFlexiblePipe->SetEndElevation(dlg.m_dBomH);
						pFlexiblePipe->SetSection(dlg.m_dL, dlg.m_dt, 0.0);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_NAME, _T("扁钢"));
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FORUSE, _T("避雷网"));
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_L, dlg.m_dL);
						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_T, dlg.m_dt);
						//示例
						AcDbObjectId idPipe = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
						pFlexiblePipe->setLayer(idPipe);

						CoreTools::AddToModelSpace(pFlexiblePipe);
					}
				}

				AcDbPolyline* pPl = pRoadAxLn->ConvertTo2dPline();
				if (!pPl)
				{
					return;
				}

				int nCount(0), i(0), ntemp(0);
				double dLen(.0);
				AcGePoint3d pt, ptS, ptE, ptTemp;
				AcGeVector3d Z(AcGeVector3d::kZAxis), vt, vtDir;
				
				int nNum = pPl->numVerts();

				AcGePoint3dArray ptAr;
				ptAr.removeAll();
				AcGeVector3dArray vecAr;
				vecAr.removeAll();
				for (i = 0; i < pPl->numVerts() - 1; ++i)
				{
					pPl->getPointAt(i, ptS);
					pPl->getPointAt(i + 1, ptE);

					vt = (ptS - ptE).normalize();

					dLen = ptS.distanceTo(ptE);
					nCount = (int)(dLen / dlg.m_dSpace);

					for (int j = 0; j <= nCount; ++j)
					{
						pt = ptS - vt * dlg.m_dSpace * j;

						ptAr.append(pt);
						vecAr.append(vt);

						pPl->getEndPoint(ptE);
						dLen = pt.distanceTo(ptE);
						if (dLen < dlg.m_dSpace)
						{
							ptAr.append(ptE);
							vecAr.append(vt);
						}
					}
				}

				AcArray<AcDbRegion*> regs;
				AcDbRegion *pTopReg(NULL), *pSubTopReg(NULL), *pReg(NULL);
				AecDbEwEquipment* pEqu = new AecDbEwEquipment;
				for (int k = 0; k < ptAr.length(); ++k)
				{
					//pEqu->SetInsert();

					pt = ptAr.at(k);
					vt = vecAr.at(k);

					ptTemp = ptAr.at(k - 1);
					dLen = ptTemp.distanceTo(pt);
					if (dLen < dlg.m_dBomW)
					{
						continue;
					}

					vtDir = vt;
					vtDir.rotateBy(-PI / 2.0, Z);
					vtDir.normalize();

					AecDbEwFlexiblePipe* pFlexiblePipeSteel = new AecDbEwFlexiblePipe;
					pReg = makeRectRegion(pt, dlg.m_dt, dlg.m_dL, vtDir, vt);
					if (!pReg)
					{
						return;
					}

					pFlexiblePipeSteel->SetSection(pReg, pt);
					pFlexiblePipeSteel->SetBaseCurve(pt - Z * (dlg.m_dL + dlg.m_dH - dlg.m_dBomH), pt + Z * dlg.m_dBomH);
					pFlexiblePipeSteel->SetStartElevation(dlg.m_dBomH);
					pFlexiblePipeSteel->SetEndElevation(dlg.m_dBomH);
					pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_NAME, _T("扁钢"));
					pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_FORUSE, _T("避雷网"));
					pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_T, dlg.m_dt);
					pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_L, dlg.m_dL);
					CoreTools::AddToModelSpace(pFlexiblePipeSteel);

					regs.removeAll();

					// 支墩
					pTopReg = makeRectRegion(pt, dlg.m_dBomW, dlg.m_dBomW, vt, vtDir);
					pSubTopReg = makeRectRegion(pt + Z * dlg.m_dH, dlg.m_dTopW, dlg.m_dTopW, vt, vtDir);
					if (pSubTopReg && pTopReg)
					{
						regs.append(pTopReg);
						regs.append(pSubTopReg);

						AecEqui::XPrimData data;
						NewLoft nl(true, regs, NULL);
						deleteContainerOfArx<AcDbRegion>(regs);
						data.m_nID = ::GetTickCount();
						data.m_eType = AecEqui::kNewLoft;
						data.m_bBoolSubtract = false;
						data.m_iClr = 256;
						data.m_vtMove = Z * -(dlg.m_dL + dlg.m_dH - dlg.m_dBomH);
						nl.toData(data.m_pData, data.m_nSize);
						pEqu->AddSubPrimObj(&data);
						clearData(data);
					}
				}
				CoreTools::AddToModelSpace(pEqu);
				deleteContainerOfArx<AcDbRegion>(regs);

				pEnt->setColorIndex(1);
				pEnt->close();
			}
		}
	}
}

//绘避雷带
void EL_HBLDCmdFnc()
{
	CAcModuleResourceOverride myResources;
	CHBLDDlg dlg;
	if (IDOK != dlg.DoModal())
	{
		return;
	}
	//参考代码
	
	AcPolylineJig jig;
	jig.InitStatusRecsFor2DLineSegs();
	if (jig.DoIt() == FALSE)
	{
		return;
	}
	
	AcDbObjectId id = jig.GetRoadAxisLineId();
	AcDbEntity* pEnt = NULL;
	if (Acad::eOk != acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
	{
		return;
	}
	
	AecDb3dRoadAxisLine* pRoadAxLn = AecDb3dRoadAxisLine::cast(pEnt);
	if (!pRoadAxLn)
	{
		return;
	}	
	
	pRoadAxLn->SaveDandRatio(dlg.m_dSteelT, 2);
	//pRoadAxLn->Create3dRoadAxisLine(dlg.m_dSteelT, 2);
	AecDb3dRoadAxisLine* pRoadAxLnCln = (AecDb3dRoadAxisLine*)pRoadAxLn->clone();
	if (!pRoadAxLnCln)
	{
		return;
	}
	
	AecDbEwFlexiblePipe* pFlexiblePipe = new AecDbEwFlexiblePipe;
	pFlexiblePipe->SetBaseCurve(pRoadAxLnCln);
	pFlexiblePipe->SetStartElevation(dlg.m_dBomEl);
	pFlexiblePipe->SetEndElevation(dlg.m_dBomEl);
	pFlexiblePipe->SetSection(dlg.m_dSteelT, dlg.m_dSteelT, 0.0);
	pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_NAME, _T("扁钢"));
	pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_FORUSE, _T("避雷带"));
	pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_L, dlg.m_dSteelT);
	pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_T, dlg.m_dSteelT);
	pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_D, dlg.m_dSteelT);
	pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_RATIO, 2);
	AcDbObjectId idPipe = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
	pFlexiblePipe->setLayer(idPipe);
	CoreTools::AddToModelSpace(pFlexiblePipe);	

	AcDbPolyline* pPl = pRoadAxLnCln->ConvertTo2dPline();
	if (!pPl)
	{
		return;
	}

	int nCount(0), i(0), ntemp(0);
	double dLen(.0);
	AcGePoint3d pt, ptS, ptE, ptTemp;
	AcGeVector3d Z(AcGeVector3d::kZAxis), vt, vtDir;

	AcGePoint3dArray ptAr;
	ptAr.removeAll();
	AcGeVector3dArray vecAr;
	vecAr.removeAll();
	for (i = 0; i < pPl->numVerts() - 1; ++i)
	{
		pPl->getPointAt(i, ptS);
		pPl->getPointAt(i + 1, ptE);

		vt = (ptS - ptE).normalize();

		dLen = ptS.distanceTo(ptE);
		if (dLen < dlg.m_dBaseR)
		{
			continue;
		}
		nCount = (int)(dLen / dlg.m_dBaseDist);

		for (int j = 0; j <= nCount; ++j)
		{
			pt = ptS - vt * dlg.m_dBaseDist * j;

			ptAr.append(pt);
			vecAr.append(vt);

			pPl->getEndPoint(ptE);
			dLen = pt.distanceTo(ptE);
			if ((dLen > dlg.m_dBaseR * .5) && (dLen < dlg.m_dBaseDist))
			{
				ptAr.append(ptE);
				vecAr.append(vt);
			}
		}
	}

	AecDbEwEquipment* pEqu = new AecDbEwEquipment;
	AcDbRegion* pReg(NULL);
	for (int k = 0; k < ptAr.length(); ++k)
	{
		pt = ptAr.at(k);
		ptTemp = ptAr.at(k - 1);
		vt = vecAr.at(k);

		dLen = ptTemp.distanceTo(pt);
		if (dLen < dlg.m_dBaseR * .5)
		{
			continue;
		}

		vtDir = vt;
		vtDir.rotateBy(-PI / 2.0, Z);
		vtDir.normalize();

		pt += Z * dlg.m_dBomEl;

		// 圆钢 + 扁钢
		AecDbEwFlexiblePipe* pFlexiblePipeSteel = new AecDbEwFlexiblePipe;
		pFlexiblePipeSteel->SetBaseCurve(pt - Z * dlg.m_dSteelH, pt);
		if (dlg.m_bSteelType)
		{
			// 圆钢
			pFlexiblePipeSteel->SetSection(dlg.m_dSteelT, 0.0);
			pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_NAME, _T("圆钢"));
		}
		else
		{
			// 扁钢
			pReg = makeRectRegion(pt, dlg.m_dSteelT, dlg.m_dSteelT, vt, vtDir);
			if (!pReg)
			{
				return;
			}
			pFlexiblePipeSteel->SetSection(pReg, pt);
			pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_NAME, _T("扁钢"));
		}
		pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_FORUSE, _T("避雷带"));
		pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_L, dlg.m_dSteelT);
		pFlexiblePipeSteel->GetSpecialtyData()->SetAt(KEY_T, dlg.m_dSteelT);
		pFlexiblePipeSteel->GetSpecialtyData()->SetAt(PIPE_D, dlg.m_dSteelT);
		pFlexiblePipeSteel->GetSpecialtyData()->SetAt(PIPE_RATIO, 2);
		AcDbObjectId idSteel = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
		pFlexiblePipeSteel->setLayer(idSteel);
		CoreTools::AddToModelSpace(pFlexiblePipeSteel);

		// 底座
		pReg = makeCircleRegion(pt - Z * dlg.m_dSteelH, Z, dlg.m_dBaseR * .5);
		if (!pReg)
		{
			return;
		}
		NewExtrude extrudeDZ(true, pReg, dlg.m_dBaseH);
		DELETE_PTR(pReg);
		AecEqui::XPrimData dataDZ;
		dataDZ.m_eType = AecEqui::kNewExtrude;
		dataDZ.m_bBoolSubtract = false;
		dataDZ.m_iClr = 50;
		extrudeDZ.toData(dataDZ.m_pData, dataDZ.m_nSize);
		pEqu->AddSubPrimObj(&dataDZ);
		clearData(dataDZ);
	}
	CoreTools::AddToModelSpace(pEqu);

	//pEnt->setColorIndex(1);
	pEnt->close();
}

//加伸缩节
void EL_JSSJCmdFnc()
{
	//拾取避雷带位置点
	//输入上弯半径

	// 拾取避雷带位置点
	ads_name ent;
	ads_point pt;
	int nRes = acedEntSel(_T("\n拾取避雷带:"), ent, pt);
	if (nRes != RTNORM) return;
	AcDbObjectId id;
	acdbGetObjectId(id, ent);

	ads_point adsPtSelect;
	nRes = acedGetPoint(NULL, _T("\n拾取避雷带位置点:"), adsPtSelect);
	if (nRes != RTNORM)
	{
		return;
	}

	ads_point pt1;
	acdbUcs2Wcs(adsPtSelect, pt1, false);
	AcGePoint3d ptGe[6];
	ptGe[0] = asPnt3d(pt1);

	// 输入上弯半径
	double dR(.0);
	nRes = acedGetReal(_T("\n输入上弯半径: "), &dR);
	if (nRes != RTNORM) return;

	AcDbEntity* pEnt = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
	{
		AecDbEwFlexiblePipe* pFl = AecDbEwFlexiblePipe::cast(pEnt);
		if (!pFl) return;
		AcDbCurve* pBaseCurve = pFl->GetBaseCurve();//路径
		if (!pBaseCurve) return;
		AecDb3dRoadAxisLine* pRoadAxLn = AecDb3dRoadAxisLine::cast(pBaseCurve);
		if (!pRoadAxLn)
		{
			return;
		}

		AcDbPolyline* pPl = pRoadAxLn->ConvertTo2dPline();
		if (!pPl)
		{
			return;
		}
		pPl->getClosestPointTo(ptGe[0], ptGe[1]);
		AcDbCircle* pCirM = new AcDbCircle(ptGe[1], AcGeVector3d::kZAxis, 10);
		pCirM->setColorIndex(3);
		CoreTools::AddToModelSpace(pCirM);
		double dLen(.0);
		pPl->getDistAtPoint(ptGe[1], dLen);
		pPl->getPointAtDist(dLen - dR * 2, ptGe[2]);
		pPl->getPointAtDist(dLen + dR * 2, ptGe[3]);
		AcDbCircle* pCirS = new AcDbCircle(ptGe[2], AcGeVector3d::kZAxis, 10);
		pCirS->setColorIndex(6);
		CoreTools::AddToModelSpace(pCirS);
		AcDbCircle* pCirE = new AcDbCircle(ptGe[3], AcGeVector3d::kZAxis, 10);
		pCirE->setColorIndex(6);
		CoreTools::AddToModelSpace(pCirE);

		AecDb3dRoadAxisLine* pRoad = new AecDb3dRoadAxisLine();
		AcDbCurve* pCurveF(NULL);
		int nNum = pRoadAxLn->GetCurveSegCount();
		double dLen1(.0), dLen2(.0), dLen3(.0);
		AcGePoint3d ptE;
		int nIndex(0);
		AcDbLine* pL(NULL);
		AcDbArc* pArc(NULL);
		for (int i(0); i < nNum; ++i)
		{
			pCurveF = pRoadAxLn->GetCurveSeg(i);
			pL = AcDbLine::cast(pCurveF);
			pArc = AcDbArc::cast(pCurveF);
			if (!pL && !pArc)
			{
				acutPrintf(_T("\n存在除直线、弧线之外的曲线类型！"));
				return;
			}
			
			dLen3 += dLen1;
			pCurveF->getEndPoint(ptE);
			pCurveF->getDistAtPoint(ptE, dLen1);
			dLen2 += dLen1;

			if ((dLen <= dLen2)&&(dLen >= dLen3))
			{
				acutPrintf(_T("\nfind！"));
				nIndex = i;
			}
		}

		for (int i(0); i < nIndex; ++i)
		{
			pCurveF = pRoadAxLn->GetCurveSeg(i);
			pL = AcDbLine::cast(pCurveF);
			pArc = AcDbArc::cast(pCurveF);
			if (!pL && !pArc)
			{
				acutPrintf(_T("\n存在除直线、弧线之外的曲线类型！"));
				return;
			}

			pRoad->AppendCurveSeg(pCurveF);
		}

		AcGePoint3dArray ptAr;
		ptAr.removeAll();
		ptAr.append(ptGe[2]);
		ptAr.append(ptGe[3]);
		AcDbVoidPtrArray CurveAr;
		CurveAr.removeAll();
		pCurveF = pRoadAxLn->GetCurveSeg(nIndex);
		Acad::ErrorStatus es = pCurveF->getSplitCurves(ptAr, CurveAr);
		if (es != Acad::eOk)
		{
			return;
		}
		AecDb3dRoadAxisLine* pCurveS = (AecDb3dRoadAxisLine*)CurveAr.first();
		AecDb3dRoadAxisLine* pCurveE = (AecDb3dRoadAxisLine*)CurveAr.last();
		if (!pCurveS) return;
		AcGeMatrix3d mat;
		mat.setToIdentity();
		mat.setTranslation(AcGeVector3d::kZAxis * 150);
		//pCurveS->transformBy(mat);
		pCurveS->setColorIndex(3);
		CoreTools::CloneAndAddToModelSpace(pCurveS);
		if (!pCurveE) return;
		mat.setToIdentity();
		mat.setTranslation(AcGeVector3d::kZAxis * 150);
		//pCurveE->transformBy(mat);
		pCurveE->setColorIndex(3);
		CoreTools::CloneAndAddToModelSpace(pCurveE);

		pRoad->AppendCurveSeg(pCurveS);

		AcGeVector3d vt, vtDir, Z(AcGeVector3d::kZAxis);
		vt = (ptGe[2] - ptGe[3]).normalize();
		vtDir = vt;
		vtDir.rotateBy(PI / 2.0, Z);
		vtDir.normalize();

		AcGePoint3d pt = ptGe[2] + Z * dR;
		AcDbArc* pArcTest = new AcDbArc(pt, vtDir, dR, PI * 1.5, PI * 2);
		CoreTools::CloneAndAddToModelSpace(pArcTest);
		pRoad->AppendCurveSeg(pArcTest);
		pt -= vt * dR * 2;
		pArcTest = new AcDbArc(pt, vtDir, dR, .0, PI);
		CoreTools::CloneAndAddToModelSpace(pArcTest);
		pRoad->AppendCurveSeg(pArcTest);
		pt -= vt * dR * 2;
		pArcTest = new AcDbArc(pt, vtDir, dR, PI, PI * 1.5);
		CoreTools::CloneAndAddToModelSpace(pArcTest);
		pRoad->AppendCurveSeg(pArcTest);

		pRoad->AppendCurveSeg(pCurveE);

		for (int i = (nIndex + 1); i < nNum; ++i)
		{
			pCurveF = pRoadAxLn->GetCurveSeg(i);
			pL = AcDbLine::cast(pCurveF);
			pArc = AcDbArc::cast(pCurveF);
			if (!pL && !pArc)
			{
				acutPrintf(_T("\n存在除直线、弧线之外的曲线类型！"));
				return;
			}

			pRoad->AppendCurveSeg(pCurveF);
		}
		
		pFl->SetBaseCurve(pRoad);

		pEnt->close();
	}
}

//翻弯避让
void EL_FWBRCmdFnc()
{
	//拾取避雷带位置第一点
	//拾取避雷带位置第二点
	//输入过度弯曲的半径:

	ads_name ent;
	ads_point adsPt;
	int nRes = acedEntSel(_T("\n拾取避雷带:"), ent, adsPt);
	if (nRes != RTNORM) return;
	AcDbObjectId id;
	acdbGetObjectId(id, ent);

	ads_point adsPtS, adsPtE;
	nRes = acedGetPoint(NULL, _T("\n拾取避雷带位置第一点:"), adsPtS);
	if (nRes != RTNORM)
	{
		return;
	}
	nRes = acedGetPoint(NULL, _T("\n拾取避雷带位置第二点:"), adsPtE);
	if (nRes != RTNORM)
	{
		return;
	}

	ads_point adsPtS1, adsPtE1;
	acdbUcs2Wcs(adsPtS, adsPtS1, false);
	acdbUcs2Wcs(adsPtE, adsPtE1, false);
	AcGePoint3d ptGe[6];
	ptGe[0] = asPnt3d(adsPtS1);
	ptGe[1] = asPnt3d(adsPtE1);

	double dDist = ptGe[0].distanceTo(ptGe[1]);
	if (dDist < 1e-6)
	{
		acutPrintf(_T("\n拾取避雷带位置的两点距离(%g)太短!"), dDist);
		return;
	}

	// 输入过度弯曲的半径:
	double dR(.0);
	nRes = acedGetReal(_T("\n请输入过度弯曲的半径: "), &dR);
	if (nRes != RTNORM) return;

	dDist = ptGe[0].distanceTo(ptGe[1]);
	if (dDist < dR * 2)
	{
		acutPrintf(_T("\n拾取避雷带位置的两点距离(%g)太短!"), dDist);
		return;
	}

	AcDbEntity* pEnt = NULL;
	if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
	{
		AecDbEwFlexiblePipe* pFl = AecDbEwFlexiblePipe::cast(pEnt);
		if (!pFl) return;
		AcDbCurve* pBaseCurve = pFl->GetBaseCurve();//路径
		if (!pBaseCurve) return;
		AecDb3dRoadAxisLine* pRoadAxLn = AecDb3dRoadAxisLine::cast(pBaseCurve);
		if (!pRoadAxLn)
		{
			return;
		}
		
		AcDbPolyline* pPl = pRoadAxLn->ConvertTo2dPline();
		if (!pPl)
		{
			return;
		}
		pPl->getClosestPointTo(ptGe[0], ptGe[2]);
		pPl->getClosestPointTo(ptGe[1], ptGe[3]);
		double dLenS(.0), dLenE(.0);
		pPl->getDistAtPoint(ptGe[2], dLenS);
		pPl->getDistAtPoint(ptGe[3], dLenE);
		if (dLenS > dLenE)
		{
			swap(ptGe[2], ptGe[3]);
		}

		AcGeVector3d vt, vtDir, Z(AcGeVector3d::kZAxis);
		vt = (ptGe[2] - ptGe[3]).normalize();
		vtDir = vt;
		vtDir.rotateBy(PI / 2.0, Z);
		vtDir.normalize();

		dDist = ptGe[2].distanceTo(ptGe[3]);
		AcGePoint3d ptMid = ptGe[2] - vt * dDist * .5;;

		AcDbCircle* pCirS = new AcDbCircle(ptGe[2], AcGeVector3d::kZAxis, 10);
		pCirS->setColorIndex(3);
		CoreTools::AddToModelSpace(pCirS);
		AcDbCircle* pCirM = new AcDbCircle(ptMid, AcGeVector3d::kZAxis, 10);
		pCirM->setColorIndex(6);
		CoreTools::AddToModelSpace(pCirM);
		AcDbCircle* pCirE = new AcDbCircle(ptGe[3], AcGeVector3d::kZAxis, 10);
		pCirE->setColorIndex(3);
		CoreTools::AddToModelSpace(pCirE);

		pPl->getDistAtPoint(ptMid, dDist);

		AecDb3dRoadAxisLine* pRoad = new AecDb3dRoadAxisLine();
		AcDbCurve* pCurveF(NULL);
		int nNum = pRoadAxLn->GetCurveSegCount();
		double dLen1(.0), dLen2(.0), dLen3(.0);
		AcGePoint3d ptE;
		int nIndex(0);
		AcDbLine* pL(NULL);
		AcDbArc* pArc(NULL);
		for (int i(0); i < nNum; ++i)
		{
			pCurveF = pRoadAxLn->GetCurveSeg(i);
			pL = AcDbLine::cast(pCurveF);
			pArc = AcDbArc::cast(pCurveF);
			if (!pL && !pArc)
			{
				acutPrintf(_T("\n存在除直线、弧线之外的曲线类型！"));
				return;
			}

			dLen3 += dLen1;
			pCurveF->getEndPoint(ptE);
			pCurveF->getDistAtPoint(ptE, dLen1);
			dLen2 += dLen1;

			if ((dDist <= dLen2) && (dDist >= dLen3))
			{
				acutPrintf(_T("\nfind！"));
				nIndex = i;
			}
		}

		for (int i(0); i < nIndex; ++i)
		{
			pCurveF = pRoadAxLn->GetCurveSeg(i);
			pL = AcDbLine::cast(pCurveF);
			pArc = AcDbArc::cast(pCurveF);
			if (!pL && !pArc)
			{
				acutPrintf(_T("\n存在除直线、弧线之外的曲线类型！"));
				return;
			}

			pRoad->AppendCurveSeg(pCurveF);
		}

		AcGePoint3dArray ptAr;
		ptAr.removeAll();
		ptAr.append(ptGe[2]);
		ptAr.append(ptGe[3]);
		AcDbVoidPtrArray CurveAr;
		CurveAr.removeAll();
		pCurveF = pRoadAxLn->GetCurveSeg(nIndex);
		Acad::ErrorStatus es = pCurveF->getSplitCurves(ptAr, CurveAr);
		if (es != Acad::eOk)
		{
			return;
		}
		AecDb3dRoadAxisLine* pCurveS = (AecDb3dRoadAxisLine*)CurveAr.first();
		AecDb3dRoadAxisLine* pCurveE = (AecDb3dRoadAxisLine*)CurveAr.last();
		if (!pCurveS) return;
		AcGeMatrix3d mat;
		mat.setToIdentity();
		mat.setTranslation(AcGeVector3d::kZAxis * 150);
		//pCurveS->transformBy(mat);
		pCurveS->setColorIndex(3);
		CoreTools::CloneAndAddToModelSpace(pCurveS);
		if (!pCurveE) return;
		mat.setToIdentity();
		mat.setTranslation(AcGeVector3d::kZAxis * 150);
		//pCurveE->transformBy(mat);
		pCurveE->setColorIndex(3);
		CoreTools::CloneAndAddToModelSpace(pCurveE);

		pRoad->AppendCurveSeg(pCurveS);

		AcGePoint3d pt = ptGe[2] + Z * dR;
		pArc = new AcDbArc(pt, vtDir, dR, PI * 1.5, PI * 2);
		CoreTools::CloneAndAddToModelSpace(pArc);
		pRoad->AppendCurveSeg(pArc);
		pt -= vt * dR * 2;
		pArc = new AcDbArc(pt, vtDir, dR, PI * .5, PI);
		CoreTools::CloneAndAddToModelSpace(pArc);
		pRoad->AppendCurveSeg(pArc);
		
		ptGe[4] = ptGe[2] - vt * dR * 2;
		ptGe[4] += Z * dR * 2;
		ptGe[5] = ptGe[3] + vt * dR * 2;
		ptGe[5] += Z * dR * 2;
		pL = new AcDbLine(ptGe[4], ptGe[5]);
		pL->setColorIndex(3);
		CoreTools::CloneAndAddToModelSpace(pL);
		pRoad->AppendCurveSeg(pL);

		pt = ptGe[3] + Z * dR;
		pt += vt * dR * 2;
		pArc = new AcDbArc(pt, vtDir, dR, .0, PI * .5);
		CoreTools::CloneAndAddToModelSpace(pArc);
		pRoad->AppendCurveSeg(pArc);
		pt -= vt * dR * 2;
		pArc = new AcDbArc(pt, vtDir, dR, PI, PI * 1.5);
		CoreTools::CloneAndAddToModelSpace(pArc);
		pRoad->AppendCurveSeg(pArc);

		pRoad->AppendCurveSeg(pCurveE);

		for (int i = (nIndex + 1); i < nNum; ++i)
		{
			pCurveF = pRoadAxLn->GetCurveSeg(i);
			pL = AcDbLine::cast(pCurveF);
			pArc = AcDbArc::cast(pCurveF);
			if (!pL && !pArc)
			{
				acutPrintf(_T("\n存在除直线、弧线之外的曲线类型！"));
				return;
			}

			pRoad->AppendCurveSeg(pCurveF);
		}

		pFl->SetBaseCurve(pRoad);

		pEnt->close();
	}
}

//加引下线
void EL_JYXXCmdFnc()
{
	//拾取避雷带加引下线位置点:
	ads_name ent;
	ads_point pt;
	int nRes = acedEntSel(_T("\n拾取避雷带位置点:"), ent, pt);
	if (nRes != RTNORM) return;

}

//柔性类管
void EL_RXLGCmdFnc()
{
	CAcModuleResourceOverride myResources;
	CRXLGDlg dlg;
	if (IDOK == dlg.DoModal())
	{
		AcPolylineJig jig;
		jig.InitStatusRecsForLineSegs();
		if (jig.DoIt())
		{
			AcDbObjectId id = jig.GetRoadAxisLineId();

			AcDbEntity *pEnt = NULL;
			if (Acad::eOk == acdbOpenAcDbEntity(pEnt, id, AcDb::kForWrite))
			{
				AecDb3dRoadAxisLine *pRoadAxLn = AecDb3dRoadAxisLine::cast(pEnt);
				if (pRoadAxLn != NULL)
				{
					//TEST
					//AecDb3dRoadAxisLine *pRoadAxLnCln2 = (AecDb3dRoadAxisLine *)pRoadAxLn->clone();
					//pRoadAxLnCln2->setColorIndex(2);
					//CoreTools::AddToModelSpace(pRoadAxLnCln2);

					pRoadAxLn->SaveDandRatio(dlg.m_dD, dlg.m_dRatio);
					//pRoadAxLn->Create3dRoadAxisLine(dlg.m_dD, dlg.m_dRatio);

					AecDb3dRoadAxisLine*pRoadAxLnCln = (AecDb3dRoadAxisLine *)pRoadAxLn->clone();
					if (pRoadAxLnCln != NULL)
					{
						AecDbEwFlexiblePipe *pFlexiblePipe = new AecDbEwFlexiblePipe;
						pFlexiblePipe->SetBaseCurve(pRoadAxLnCln);
						pFlexiblePipe->SetSection(0.5 * dlg.m_dD,0.0);//TEST RECT

						pFlexiblePipe->GetSpecialtyData()->SetAt(KEY_NAME, _T("柔性类管"));
						pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_D, dlg.m_dD);
						pFlexiblePipe->GetSpecialtyData()->SetAt(PIPE_RATIO, dlg.m_dRatio);
						// 示例
						AcDbObjectId idPipe = KTSetting::InitLayer(LAY_PIPE_OUTSIDE);
						pFlexiblePipe->setLayer(idPipe);

						CoreTools::AddToModelSpace(pFlexiblePipe);

						delete pRoadAxLnCln;
					}
				}
				//TEST
				//pEnt->erase();
				pEnt->setColorIndex(1);
				pEnt->close();
			}
		}
	}
}

//布置电气柜
void EL_BDQGCmdFnc()
{
	ads_point adspt, adspt2;
	int nRes = acedGetPoint(NULL, _T("\n选择插入点:"), adspt);
	if (nRes != RTNORM) return;
	AcGePoint3d ptIns(asPnt3d(adspt));
	CoreTools::UCS2WCS(ptIns, ptIns);

	AcGeVector3d vtDir(AcGeVector3d::kXAxis);
	nRes = acedGetPoint(adspt, _T("\n选择插入方向<默认X方向>:"), adspt2);
	if (nRes == RTNORM)
	{
		AcGePoint3d pt2(asPnt3d(adspt2));
		CoreTools::UCS2WCS(pt2, pt2);
		vtDir = pt2 - ptIns;
	}

	CAcModuleResourceOverride myResources;
	CBDQGDlg dlg;
	if (IDOK == dlg.DoModal())
	{
		AecDbEwEquipment *pEqu = dlg.getEqu(ptIns, vtDir);
		if (pEqu)
			CoreTools::AddToModelSpace(pEqu);
	}
}

//桥架管件测试
void EL_QJCSCmdFnc()
{

}