gjm/envi-code
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
c7102cfe254439e5b0eeadf38973c9bb1d034532
envi-code/SourceCode/Code2026/tg_shs/shs_outdoor/WellDlg.cpp
T
gjm 345044cb46 初始化提交
2026-09-28 15:28:50 +08:00

2051 lines
57 KiB
C++
Raw Blame History

// WellDlg.cpp : implementation file
//
#include "stdafx.h"
#include "twtdef.h"
#include <DbWell.h>
#include <SSearchPipeList.h>
#include <xtext.h>
#include <TAPI.h>
#include <PipeWireMonitor.h>
#include "WellDlg.h"
#include "SelectBlkDlg.h"
#include "TWellJig.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
//专给室外用
void DrawPipeByIdx(XPoint p1, XPoint p2, int idx, double nGradient, double nDn, int iMat = 12)
{
int up(0), low(0);
double nElevation(0);
BOOL ret = GetInterPipeLevel(p1, p2, nElevation, up, low);
p1.z = 0;
p2.z = 0;
InitPipeLayer(GetPipeLayerByIdx(idx));
TDbPipe *pPipe = new TDbPipe;
pPipe->SetStartPoint(p1);
pPipe->SetEndPoint(p2);
// cet 2011.11.1 add 调整线型
// 2008.10.27 自动修正上华带文字线型的逆向管线
CString csLineType = GetPipeWireLayLineType(GetPipeLayerByIdx(idx));
// 2011.7.8 sr GetPipeWireLayLineType有时候会返回byLayer
CString csLineType2 = GetLayerLineType(GetPipeLayerByIdx(idx));
if(csLineType2.Find(_T("TG")) > -1)
{
XLine line(p1, p2);
double nAng = line.Direction();
if(nAng > PI/2 && nAng < (PI/2*3 + 0.001)){
pPipe->SetStartPoint(p2);
pPipe->SetEndPoint(p1);
}
}
if(up != 256)
pPipe->SetHideLevel(up+1);
else
pPipe->SetHideLevel(low+1);
pPipe->SetDnDiameter(nDn); //专给室外用
pPipe->SetPipeGradient(nGradient);
pPipe->setLayer(GetPipeLayerByIdx(idx));
pPipe->setLinetype(GetPipeWireLayLineType(GetPipeLayerByIdx(idx)));
pPipe->SetModelType(TPipeSys::kModel);
pPipe->SetMaterial(iMat); //钢筋混凝土 专给室外用
pPipe->SetPipeWeight(g_nPipeWidth[idx]);
pPipe->SetSysType(GetPipeSysByLayer(GetPipeLayerByIdx(idx)));
pPipe->SetRadius(g_nPipeRadius[idx]);
pPipe->setColor(AcCmColor()); //随层
AddToCurrentSpace(pPipe, Adesk::kTrue);
}
int GetCurWellSerial(const TCHAR* szLay)
{
RBList rbMask(RTDXF0, _T("ATS_WELL"), NULL);
PickSet ss(SS_FREE);
ss.Get(_T("X"), NULL, NULL, rbMask);
long len = ss.Length();
int iRet(0);
CString csLay = szLay;
int l = csLay.GetLength();
for(long i=0;i<len;i++){
Entity ent = ss[i];
CString csSerial = GetWellName(ent);
int idx = csSerial.Find(csLay);
if(idx < 0)
continue;
CString csTmp = csSerial.Right(csSerial.GetLength() - l);
int iTmp = _ttoi(csTmp);
if(iTmp > iRet)
iRet = iTmp;
}
return iRet;
}
//***************************************************************************************************
// 布置井
//***************************************************************************************************
CString GetBlkDesName(const TCHAR *szBlk)
{
CString csBlkName = szBlk;
CString csTKName, csRocord, csDesName;
SplitBlkStr(csBlkName, csTKName, csRocord);
csTKName = g_csDwbPath + csTKName + _T(".tk");
csDesName = GetBlkDesName((const TCHAR*)csRocord, (const TCHAR*)csTKName);
return csDesName;
}
// 已知一个线段，在上面按等距布置井，并连管
//如果pCurve为空退出
BOOL InsWellByCurve(AcDbCurve *pCurve, XPoint ptWell, XPoint &ptPick, Entity &entLastWell, CWellDlg &dlg)
{
if (pCurve == NULL)
return FALSE;
double dDistEven = dlg.m_nDist;
if(!DocGetMeterUnitDraw())
dDistEven = dDistEven*1000;
double dEndParam, dStartParam, dWellParam, dPickParam;
XPointList lstPt;
lstPt.NewAppend(ptWell);
XPoint ptOnCurve;
pCurve->getClosestPointTo(ptWell, ptOnCurve);
double dDist = ads_distance(ptWell, ptOnCurve);
if(dDist > 0.001)
return FALSE;
ptWell = ptOnCurve;
pCurve->getClosestPointTo(ptPick, ptPick);
pCurve->getEndParam(dEndParam);
pCurve->getStartParam(dStartParam);
pCurve->getParamAtPoint(ptWell, dWellParam);
pCurve->getParamAtPoint(ptPick, dPickParam);
double dFromStart = fabs(dPickParam - dStartParam);
double dFromEnd = fabs(dPickParam - dEndParam);
BOOL bToStart = FALSE;
if(dPickParam > dWellParam)
bToStart = FALSE;
else if(dPickParam < dWellParam)
bToStart = TRUE;
double dDist2Well(0), dAllLength(0), dLength(0), dParamDist(0);
pCurve->getDistAtPoint(ptWell, dDist2Well);
pCurve->getDistAtParam(dPickParam, dAllLength);
if(bToStart)
dLength = dDist2Well - dAllLength;
else
dLength = dAllLength - dDist2Well;
int num = int(dLength / dDistEven);
double dTmpDist(dDist2Well);
for(int i=0;i<num;i++){
if(bToStart)
dTmpDist -= dDistEven;
else
dTmpDist += dDistEven;
XPoint ptTmp;
pCurve->getPointAtDist(dTmpDist, ptTmp);
lstPt.NewAppend(ptTmp);
ptPick = ptTmp;
}
////////////////////////////////////////////////////////////////////////////////////////////////////
// 第二步， 绘制井
int len = lstPt.Length();
if(len < 2)
return FALSE;
double nRotate = 0;
CString csName = dlg.m_csName;
for(i=1;i<len;i++){
XPoint ptIns = *lstPt[i];
TDbWell *pEquip = new TDbWell;
pEquip->SetBlock2d(GetBlkIdByName(dlg.m_csBlkName));
if(_tcsicmp(_T("$TwtSys$00000389"), dlg.m_csBlkName) == 0 ){
pEquip->SetHidePipe(FALSE);
nRotate += PI/2;
}
else
pEquip->SetHidePipe(TRUE);
pEquip->SetAngle(nRotate);
if(!!entLastWell && _tcsicmp(_T("$TwtSys$00000389"), dlg.m_csBlkName) != 0){
OPENOBJ_BEGIN(entLastWell, AcDb::kForWrite, TDbWell, pEquip2);
if(pEquip2){
pEquip2->SetAngle(nRotate);
}
OPENOBJ_END();
}
ptIns.z = 0;
pEquip->SetLocation(ptIns);
pEquip->SetLayoutRotation(Ucs2Wcs(0.0));
pEquip->SetWellName(csName);
pEquip->SetTextHeight(g_nDimWellHeight);
pEquip->SetTextStyleId(InitTextStyle(g_csDimWellStyle));
pEquip->SetLabelLayer(InitLayer(LAY_WELL_TEXT));
pEquip->SetWellEleDown(0);
// if(g_bEquipByScale)
//pEquip->SetScale(dlg.m_nScale);
// zxl 2013.07.26 modify
if (dlg.m_iDrawType == 1)
{
pEquip->SetScale(dlg.m_nScale / DocGetPScale());
}
else
{
pEquip->SetScale(dlg.m_nScale);
}
// else
// pEquip->SetScale(dlg.m_nScale*DocGetPScale());
pEquip->setLayer(dlg.GetWellLayer());
pEquip->SetWellEleUp(dlg.m_nElevation);
if(GetBlkDesName(dlg.m_csBlkName).Find(_T("方")) < 0)
pEquip->SetNumber(_T("CIRCLE-0.5"));
pEquip->setColor(AcCmColor()); //随层
if(dlg.m_csDimPos == _T("不标注"))
pEquip->EnableDrawLabel(FALSE);
else
pEquip->EnableDrawLabel(TRUE, _tstof(dlg.m_csDimPos));
AddToCurrentSpace(pEquip, Adesk::kTrue);
entLastWell.GetLast();
WriteXdata(entLastWell, _T("TG-WELL-RADIUS"), XString(_T("%.2f"), dlg.m_dWellRadius));
csName = PlusString(csName, 1, TRUE);
XPoint p1, p2;
p1 = *lstPt[i-1];
p2 = ptIns;
if(dlg.m_bDrawPipe){
int iPipeIdx(0);
if(dlg.m_iPipeSys == 0)
iPipeIdx = 0;
else if(dlg.m_iPipeSys == 1)
iPipeIdx = 3;
else if(dlg.m_iPipeSys == 2)
iPipeIdx = 4;
else if(dlg.m_iPipeSys == 3)
iPipeIdx = 5;
else if(dlg.m_iPipeSys == 4)
iPipeIdx = 6;
else if(dlg.m_iPipeSys == 5)
iPipeIdx = 7;
else if(dlg.m_iPipeSys == 6)
iPipeIdx = 14;
DrawPipeByIdx(p1, p2, iPipeIdx, dlg.m_nGradient, _tstof(dlg.m_csDn), dlg.m_iMaterial);
}
}
dlg.m_csName = csName;
dlg.UpdateData(FALSE);
TPipePerDocData *pData = GetCurPipeDocData();
pData->ApplyUpdates();
return TRUE;
}
// 沿线等距布置井(支持OFFSET)
void InsWellByLine(XPoint ptWell, Entity &entLastWell, CWellDlg &dlg)
{
XPoint ptTemp = ptWell;
PickSet ss(SS_FREE);
RBList rbMask(RTDXF0, _T("LWPOLYLINE,LINE,ARC"), NULL);
GetPointPickSet(ptTemp,ss,rbMask,1);
ptWell.z = 0;
Entity ent, ent2;
XPoint ptPick, ptPick2;
double dOffsetDist(0);
if (ss.Length() <= 0)
{
//井不在所选的线上面
if(SelectEntity1(0.3, _T("\n请拾取布置井需要沿的PLINE、直线、弧线 <退出>"), ent, ptPick, rbMask) != RTNORM)
return;
ptPick = Ucs2Wcs(ptPick);
ptWell.z = ptPick.z; // cet 2012.8.21 add 保持z值一致
OPENOBJ_BEGIN(ent, AcDb::kForRead, AcDbCurve, pCurve);
if(pCurve)
{
XPoint ptOnCurve;
pCurve->getClosestPointTo(ptWell, ptOnCurve);
dOffsetDist = ads_distance(ptWell, ptOnCurve);
if(dOffsetDist > 0.001){
AcDbCurve *pCurve2 = GetOffsetCurve(pCurve, dOffsetDist, ptWell);
if (pCurve2 == NULL)
return;
InsWellByCurve(pCurve2, ptWell, ptPick, entLastWell, dlg);
delete pCurve2;
ptWell = ptPick;
pCurve->getClosestPointTo(ptPick, ptPick);
}
else
InsWellByCurve(pCurve, ptWell, ptPick, entLastWell, dlg);
}
OPENOBJ_END();
if(ent.Is(_T("LWPOLYLINE")))
return;
}
else
{
ptPick = ptTemp;
long lIndex = 0;
ent = ss[lIndex];
}
while(SelectEntity1(0.3, _T("\n请拾取下一段PLINE、直线、弧线 <退出>"), ent2, ptPick2, rbMask) == RTNORM){
ptPick2 = Ucs2Wcs(ptPick2);
//临时创建1条PLINE线，反复调用InsWellByCurve
AcDbPolyline *pLine = GetNextPloyLine(ent, ent2, ptPick, ptPick2);
if(pLine != NULL){
ptWell.z = pLine->elevation(); // cet 2012.8.21 add 保持z值一致
ptPick.z = pLine->elevation(); // cet 2012.8.21 add 保持z值一致
if(dOffsetDist > 0.001){
AcDbCurve *pCurveOffset = GetOffsetCurve((AcDbCurve *)pLine, dOffsetDist, ptWell);
pCurveOffset->getClosestPointTo(ptPick, ptWell);
pCurveOffset->getClosestPointTo(ptPick2, ptPick2);
InsWellByCurve(pCurveOffset, ptWell, ptPick2, entLastWell, dlg);
ptWell = ptPick2;
delete pCurveOffset;
// AddToCurrentSpace(pCurveOffset, Adesk::kTrue);
pLine->getClosestPointTo(ptPick2, ptPick2);
}
else
InsWellByCurve(pLine, ptPick, ptPick2, entLastWell, dlg);
delete pLine;
ptPick = ptPick2;
ent = ent2;
}
}
}
// cet 2011.5.26 ad 判断是否需调整井插入点标高值
bool IsModifyWellLocation(const XPoint &ptStart, double &dEle)
{
bool bModifyWell = false;
PickSet ss(SS_FREE);
RBList rbPipe(RTDXF0, _T("ATS_PIPE"), NULL);
ss.Get(Wcs2Ucs(ptStart), rbPipe);
if (ss.Length() > 1)
{
bModifyWell = true;
for (long i = 0; i < ss.Length(); i++)
{
XPoint pt1, pt2;
GetPipePoint(ss[i], pt1, pt2);
if (pt1.Distance2d(ptStart) < _DIST_SNAP)
{
if (i == 0)
{
dEle = pt1.z;
}
else if (fabs(dEle - pt1.z) > _DIST_SNAP)
{
bModifyWell = false;
break;
}
}
else if (pt2.Distance2d(ptStart) < _DIST_SNAP)
{
if (i == 0)
{
dEle = pt2.z;
}
else if (fabs(dEle - pt2.z) > _DIST_SNAP)
{
bModifyWell = false;
break;
}
}
}
}
return bModifyWell;
}
// zxl add 2012.10.16 更换井编号图层从WELL_TEXT到对应管线标注文字图层
void GetWellSerialLayer(CString &sWellLayer, CString &sWellSerialLayer)
{
if (sWellLayer == LAY_WELL_FEED)
{
sWellSerialLayer = LAY_TEXT_FEED;
}
else if (sWellLayer == LAY_WELL_DIRT)
{
sWellSerialLayer = LAY_TEXT_DIRT;
}
else if (sWellLayer == LAY_WELL_USED)
{
sWellSerialLayer = LAY_TEXT_USED;
}
else if (sWellLayer == LAY_WELL_RAIN)
{
sWellSerialLayer = LAY_TEXT_RAIN;
}
else if (sWellLayer == LAY_WELL_USELESS)
{
sWellSerialLayer = LAY_TEXT_USELESS;
}
else if (sWellLayer == LAY_WELL_FIRE)
{
sWellSerialLayer = LAY_TEXT_FIRE;
}
else if (sWellLayer == LAY_WELL_OTHER)
{
sWellSerialLayer = LAY_TEXT_OTHER;
}
}
// 布置交点井
void CreatWell(std::vector<std::pair<AcGePoint3d, double> > &vecPts, CWellDlg &dlg)
{
CString csBlkName = dlg.m_csBlkName;
CString csTK, csRecord;
SplitBlkStr(csBlkName, csTK, csRecord);
XString xsTmp;
if(LoadDwbBlock((const TCHAR*)csTK, (const TCHAR*)csRecord, xsTmp) != RTNORM)
{
dlg.DestroyWindow();
return;
}
std::vector<AcDbObjectId> vecWell;
std::vector<std::pair<AcGePoint3d, double> >::iterator it;
for (it = vecPts.begin(); it != vecPts.end(); it++)
{
AcGePoint3d ptIns = it->first;
double dElev = it->second;
TDbWell *pEquip = new TDbWell;
pEquip->SetBlock2d(GetBlkIdByName(dlg.m_csBlkName));
if(_tcsicmp(_T("$TwtSys$00000389"), dlg.m_csBlkName) == 0 )
{
pEquip->SetHidePipe(FALSE);
}
else
{
pEquip->SetHidePipe(TRUE);
}
double nElevation(0), nRotate2(0);
int iPipeIdx(-1);
Entity entWire = GetPipeByPt(ptIns, nElevation, iPipeIdx);
if(!!entWire)
{
XPoint pt3, pt4;
GetPipePoint(entWire, pt3, pt4);
nRotate2 = ads_angle(pt3, pt4);
OPENOBJ_BEGIN(entWire, AcDb::kForWrite, TDbPipe, pPipe);
if(pPipe)
{
AcGePoint3d p1 = ptIns;
AcGePoint3d p2 = p1;
p2.z = 100;
AcDbLine line(p1, p2);
AcGePoint3dArray arry;
arry.setLogicalLength(0);
pPipe->intersectWith(&line, AcDb::kExtendBoth, arry);
if (arry.length() > 0)
{
p2 = arry[0];
}
pPipe->BreakAt(p2, PS_SNAP);
}
OPENOBJ_END();
}
pEquip->SetLayoutRotation(Ucs2Wcs(0.0));
pEquip->SetAngle(nRotate2);
CString sWellLayer = dlg.GetWellLayer();
CString sWellSerialLayer = LAY_WELL_TEXT;
GetWellSerialLayer(sWellLayer, sWellSerialLayer);
pEquip->SetLabelLayer(InitLayer(sWellSerialLayer));
if (vecPts.size() == 1)
{
pEquip->SetWellName(dlg.m_csName);
}
pEquip->SetLocation(ptIns);
pEquip->SetTextHeight(g_nDimWellHeight);
pEquip->SetTextStyleId(InitTextStyle(g_csDimWellStyle));
//pEquip->SetScale(dlg.m_nScale);
// zxl 2013.07.26 modify
if (dlg.m_iDrawType == 1)
{
pEquip->SetScale(dlg.m_nScale / DocGetPScale());
}
else
{
pEquip->SetScale(dlg.m_nScale);
}
pEquip->setLayer(dlg.GetWellLayer());
pEquip->SetWellEleUp(dlg.m_nElevation);
pEquip->SetWellEleDown(0);
if(dlg.m_csDimPos == _T("不标注") || vecPts.size() > 1)
pEquip->EnableDrawLabel(FALSE);
else
pEquip->EnableDrawLabel(TRUE, _tstof(dlg.m_csDimPos));
if(GetBlkDesName(dlg.m_csBlkName).Find(_T("方")) < 0)
pEquip->SetNumber(_T("CIRCLE-0.5"));
pEquip->setColor(AcCmColor()); //随层
AcDbObjectId id = AddToCurrentSpace(pEquip, Adesk::kTrue);
vecWell.push_back(id);
dlg.UpdateData(FALSE);
Entity entLastWell;
entLastWell.GetLast();
WriteXdata(entLastWell, _T("TG-WELL-RADIUS"), XString(_T("%.2f"), dlg.m_dWellRadius));
TPipePerDocData *pData = GetCurPipeDocData();
pData->ApplyUpdates();
// 对于不同标高的插入点都要set一次
TDbWell *pWell = NULL;
acdbOpenObject(pWell, id, AcDb::kForWrite);
if (pWell != NULL)
{
XPoint pt = pWell->GetLocation();
pt.z = dElev;
pWell->SetLocation(pt);
pWell->close();
}
TPipePerDocData *pData2 = GetCurPipeDocData();
pData2->ApplyUpdates();
}
// 将井插入点还原
std::vector<AcDbObjectId>::iterator itW;
for (itW = vecWell.begin(); itW != vecWell.end(); itW++)
{
TDbWell *pWell = NULL;
acdbOpenObject(pWell, *itW, AcDb::kForWrite);
if (pWell != NULL)
{
XPoint pt = pWell->GetLocation();
pt.z = 0.0;
pWell->SetLocation(pt);
pWell->close();
}
}
TPipePerDocData *pData3 = GetCurPipeDocData();
pData3->ApplyUpdates();
}
// 判断当前点是否存在
bool HasPushInVec(std::vector<std::pair<AcGePoint3d, double> > &vecPts, const AcGePoint3d &ptOnLine)
{
std::vector<std::pair<AcGePoint3d, double> >::iterator it;
AcGePoint3d ptCur = ptOnLine;
ptCur.z = 0;
for (it = vecPts.begin(); it != vecPts.end(); it++)
{
AcGePoint3d pt = it->first;
pt.z = 0;
if (pt.distanceTo(ptCur) < 0.001)
{
return true;
}
}
return false;
}
// 判断管线图层是否和当前选定图层是同一系统
bool IsSameSys(const CString &sLayer1, const CString &sLayer2)
{
if (sLayer1.Compare(sLayer2) == 0)
{
return true;
}
else if ((sLayer1 == LAY_PIPE_FEED || sLayer1 == LAY_PIPE_FEED2 || sLayer1 == LAY_PIPE_FEED3)
&& (sLayer2 == LAY_PIPE_FEED || sLayer2 == LAY_PIPE_FEED2 || sLayer2 == LAY_PIPE_FEED3))
{
return true;
}
else if ((sLayer1 == LAY_PIPE_FIRE || sLayer1 == LAY_PIPE_FIRE2 || sLayer1 == LAY_PIPE_FIRE3)
&& (sLayer2 == LAY_PIPE_FIRE || sLayer2 == LAY_PIPE_FIRE2 || sLayer2 == LAY_PIPE_FIRE3))
{
return true;
}
else if ((sLayer1 == LAY_PIPE_USED || sLayer1 == LAY_PIPE_USED2 || sLayer1 == LAY_PIPE_USED3)
&& (sLayer2 == LAY_PIPE_USED || sLayer2 == LAY_PIPE_USED2 || sLayer2 == LAY_PIPE_USED3))
{
return true;
}
return false;
}
// 获取交点布置井可用的管线
void GetUsefulPipe(PickSet &ss, const CString &sLayer)
{
PickSet ssPipe(SS_FREE);
for (long l = 0; l < ss.Length(); l++)
{
Entity ent = ss[l];
CString sPipeLayer;
OPENOBJ_BEGIN(ent, AcDb::kForRead, TDbPipe, pPipe);
if(pPipe != NULL)
{
sPipeLayer = pPipe->GetLayer();
}
OPENOBJ_END();
if (IsSameSys(sLayer, sPipeLayer))
{
ssPipe += ent;
}
}
ss.Free();
ss += ssPipe;
}
void InsWellByIntersect(PickSet &ssPipe, CWellDlg &dlg)
{
GetUsefulPipe(ssPipe, dlg.GetPipeLayer());
if (ssPipe.Length() < 2)
{
return;
}
double dMaxDist = DocGetCurMeterUnitDraw() ? 3 : 3000;
std::vector<std::pair<AcGePoint3d, double> > vecPts;
Entity ent1, ent2;
XPoint ptS, ptE;
for (long l = 0; l < ssPipe.Length(); l++)
{
ent1 = ssPipe[l];
GetPipePoint(ent1, ptS, ptE);
AcDbLine lPipe1(ptS, ptE);
ptS.z = 0;
ptE.z = 0;
AcDbLine line1(ptS, ptE);
for (long ll = l + 1; ll < ssPipe.Length(); ll++)
{
ent2 = ssPipe[ll];
GetPipePoint(ent2, ptS, ptE);
AcDbLine lPipe2(ptS, ptE);
ptS.z = 0;
ptE.z = 0;
AcDbLine line2(ptS, ptE);
AcGePoint3dArray arry;
arry.setLogicalLength(0);
line1.intersectWith(&line2, AcDb::kOnBothOperands,arry);
if (arry.length() == 1)
{
AcGePoint3d ptOnLine = arry[0];
AcGePoint3d pt1, pt2, ptIns = ptOnLine;
ptIns.z = dMaxDist;
AcDbLine lIns(ptOnLine, ptIns);
AcGePoint3dArray arry;
arry.setLogicalLength(0);
lIns.intersectWith(&lPipe1, AcDb::kExtendBoth, arry);
if (arry.length() > 0)
{
pt1 = arry[0];
arry.setLogicalLength(0);
}
lIns.intersectWith(&lPipe2, AcDb::kExtendBoth, arry);
if (arry.length() > 0)
{
pt2 = arry[0];
arry.setLogicalLength(0);
}
int idx(0);
XPoint pt = ptOnLine;
Entity entEq = GetWellByPt(pt, idx);
if (fabs(pt1.z - pt2.z) < dMaxDist && !entEq)
{
if (!HasPushInVec(vecPts, ptOnLine))
{
// 两根管线上的井插入点都要保存（保存第一点和第二点的标高）
vecPts.push_back(std::make_pair(pt1, pt2.z));
}
}
}
}
}
CreatWell(vecPts, dlg);
}
void InsWellCmd()
{
xg_setvar(_T("CMDECHO"), 0); // cet 2012.2.14 add 关闭回显
int nOsMode=0;
xg_getvar(_T("OSMODE"), &nOsMode);
if(g_bTgOsnap)
{
nOsMode &= ~0x4000;
nOsMode |= OS_INT|OS_END|OS_NEA;
}
XPushVar<int> vOsMode(_T("OSMODE"), nOsMode);
CWellDlg dlg(acedGetAcadFrame());
{
// if(DocGetPScale() < 10 && dlg.m_nDist > 1000.0)
// dlg.m_nDist = dlg.m_nDist/1000.0;
CTemporaryResourceOverride vTemp;
dlg.Create(IDD_WELL, acedGetAcadFrame());
dlg.ShowWindow(SW_SHOW);
acedGetAcadDwgView()->SetFocus();
}
std::vector<AcDbObjectId> vecWell; // cet 2011.5.26 add 保存修改了井插入点标高的井id，以便恢复标高
g_nInsBlkRotate = 0;
InitTwtTextStyle(g_csDimWellStyle);
XPoint ptStart;
int ret0(0);
Entity entLastWell;
PickSet ssPipe(SS_FREE);
while (ret0 != RTNORM) {
//交点布井 zxl 2013.04.09 add
ssPipe.Free();
TCHAR cKey = _T('\0');
dlg.UpdateData(TRUE);
dlg.m_bChangeSys = false;
bool bSelKeyWord = false;
RBList rbMask(RTDXF0, _T("ATS_PIPE"), 8, GetLayerNames(_T("管线")), NULL);
if (dlg.m_iMode == 4)
{
INITGET_BEG(0, _T("P A "));
ret0 = SelectEntities(_T("\n请选择管道交点{选取闭合PLINE(P)/整张图(A)}<退出>:"), ssPipe, rbMask, _T("P A "), cKey);
INITGET_END();
}
else
{
INITGET_BEG(0, _T("F R L"));
ret0 = ads_getpoint(NULL, _T("\n请点取插入点{输入参考点(F)/选取参考线(L)}<退出>:"), ptStart);
INITGET_END();
}
if(ret0 == RTKWORD){
if (dlg.m_iMode != 4)
{
XString sKeyword;
ads_getinput(sKeyword);
cKey = sKeyword[0];
}
if(cKey==_T('F'))
{
if(ads_getpoint(NULL,_T("\n请输入参考点:"), ptStart) != RTNORM){
dlg.DestroyWindow();
return;
}
ptStart = Ucs2Wcs(ptStart);
ads_getpoint(ptStart, _T("\n请输入距参考点的距离<确定>:"), ptStart);
ptStart = Ucs2Wcs(ptStart);
break;
}
if(cKey==_T('L'))
{
RBList rbMask(RTDXF0, _T("LINE"), NULL);
Entity entLine;
XPoint ptPick;
if(SelectEntity(_T("\n请拾取布置井需要参考的边线<退出>"), entLine, ptPick, rbMask) != RTNORM)
{
dlg.DestroyWindow();
return;
}
ptPick = Ucs2Wcs(ptPick);
XCurveSegment seg(entLine);
seg.ProjectToMe(ptPick, ptPick);
double nAng = ads_angle(seg.EndPoint(), seg.StartPoint());
double dDist2Line(1000);
ads_getreal(_T("\n请输入距基线距离<1000>"), &dDist2Line);
XPoint ptend, ptPipe;
int itype = -1;
ads_prompt(_T("\n请选择插入方向<确定>"));
while(1){
struct resbuf pointbuf;
int iRet = ads_grread(5, &itype, &pointbuf);
ads_point_set(pointbuf.resval.rpoint, ptend);
ptend = Ucs2Wcs(ptend);
if(itype != 5 && itype != 3 && itype != 11)
break;
AcGeVector3d vectBase(seg.EndPoint().x - seg.StartPoint().x, seg.EndPoint().y - seg.StartPoint().y, 0);
AcGeVector3d vectTmp(ptend.x - ptPick.x, ptend.y - ptPick.y, 0);
double dAng2 = vectBase.angleTo(vectTmp, AcGeVector3d::kZAxis);
if(dAng2 < PI)
ads_polar(ptPick, nAng - PI/2, dDist2Line, ptPipe);
else{
ads_polar(ptPick, nAng + PI/2, dDist2Line, ptPipe);
}
ads_redraw(NULL, 1);
if(itype == 3 || itype == 11){
ptStart = Wcs2Ucs(ptPipe);
break;
}
else{
XPoint ptTmpUcs1 = Wcs2Ucs(ptPick);
XPoint ptTmpUcs2 = Wcs2Ucs(ptPipe);
ads_grdraw(ptTmpUcs1, ptTmpUcs2, -1, 0);
}
}
break;
}//PLINE线选择范围 zxl 2013.04.09 add
else if (cKey==_T('p') || cKey==_T('P'))
{
bSelKeyWord = true;
Entity entPoly;
RBList rbMask2(RTDXF0, _T("LWPOLYLINE"), 8, _T("*"), NULL);
if(SelectEntity(_T("\n请选择表示范围的闭合PLINE:<退出>"), entPoly, rbMask2) != RTNORM)
{
return;
}
XPoly2D poly2(entPoly);
XPoint ptLow3, ptUp3;
poly2.GetExtend(ptLow3, ptUp3);;
poly2.TransUCS(Groups(0), Groups(1));
RBList rbFence = poly2.Fence();
AssureInCurrentView_New(ptLow3, ptUp3);
ssPipe.Get(_T("CP"), rbFence, NULL, rbMask);
}// 全图范围
else if (cKey==_T('a') || cKey==_T('A'))
{
bSelKeyWord = true;
acedSSGet(_T("A"), NULL, NULL, rbMask, ssPipe);
}
else{
dlg.UpdateData(TRUE);
dlg.m_csHead = dlg.GetHead();
int iSerial = GetCurWellSerial(dlg.m_csHead);
iSerial ++;
dlg.m_csName.Format(_T("%s%d"), dlg.m_csHead, iSerial);
dlg.UpdateData(FALSE);
}
}
else if(ret0 == RTCAN || ret0 == RTNONE || (ret0 == RTERROR && dlg.m_iMode == 4 && !dlg.m_bChangeSys)){
dlg.DestroyWindow();
return;
}
if (ssPipe.Length() > 0 || bSelKeyWord)// 交点布井 zxl 2013.04.09 add
{
InsWellByIntersect(ssPipe, dlg);
return;
}
}
if(!IsLayerOn(dlg.GetWellLayer()))
{
adsout << _T("\n该图层已经关闭！请打开该图层后，继续绘制！\n");
dlg.DestroyWindow();
return;
}
UNDOB;
ptStart = Ucs2Wcs(ptStart);
double nDist(0);
int idx(0);
Entity entEq = GetWellByPt(ptStart, idx);
if(!entEq){
dlg.UpdateData(TRUE);
CString csBlkName = dlg.m_csBlkName;
CString csTK, csRecord;
SplitBlkStr(csBlkName, csTK, csRecord);
XString xsTmp;
if(LoadDwbBlock((const TCHAR*)csTK, (const TCHAR*)csRecord, xsTmp) != RTNORM) {
dlg.DestroyWindow();
return;
}
double nElevation(0), nRotate2(0);
int iPipeIdx(-1);
Entity entWire = GetPipeByPt(ptStart, nElevation, iPipeIdx);
// zxl 2012.08.21 add
if (iPipeIdx >= 0)
{
if(iPipeIdx == 0)
dlg.m_iPipeSys = 0;
else if(iPipeIdx == 5)
dlg.m_iPipeSys = 3;
else if(iPipeIdx == 3)
dlg.m_iPipeSys = 1;
else if(iPipeIdx == 7)
dlg.m_iPipeSys = 5;
else if(iPipeIdx == 6)
dlg.m_iPipeSys = 4;
else if(iPipeIdx == 14)
dlg.m_iPipeSys = 6;
else if(iPipeIdx == 4)
dlg.m_iPipeSys = 2;
dlg.UpdateData(FALSE);
dlg.m_csHead = dlg.GetHead();
int iSerial = GetCurWellSerial(dlg.m_csHead);
iSerial ++;
dlg.m_csName.Format(_T("%s%d"), dlg.m_csHead, iSerial);
if(dlg.m_iPipeSys == 0)
{ // 给水
dlg.m_csDn = _T("200");
dlg.m_nGradient = 0;
dlg.m_iMaterial = 1;//给水铸铁管
dlg.UpdateData(FALSE);
}
else
{
dlg.m_csDn = _T("300");
dlg.m_nGradient = 0.003;
dlg.m_iMaterial = 12;
dlg.UpdateData(FALSE);
}
dlg.m_nElevation = 0.0;
dlg.UpdateData(FALSE);
}
if(!!entWire){
XPoint pt3, pt4;
GetPipePoint(entWire, pt3, pt4);
nRotate2 = ads_angle(pt3, pt4);
OPENOBJ_BEGIN(entWire, AcDb::kForWrite, TDbPipe, pPipe);
if(pPipe){
AcGePoint3d p1 = ptStart;
AcGePoint3d p2;
pPipe->getClosestPointTo(p1,p2);
pPipe->BreakAt(p2, PS_SNAP);
}
OPENOBJ_END();
}
// cet 2011.5.26 add 当有多于一根管子的端点与井插入点位置重合(不考虑z值)时，
// 并且管线端点标高不为0时，井无法与管子建立关联，需先将井
// 插入点标高调整到与管道端点标高一致，在命令结束时，再调整回
// 井插入点原标高值
bool bModifyWell = false;
double dEle = 0.0;
bModifyWell = IsModifyWellLocation(ptStart, dEle);
TDbWell *pEquip = new TDbWell;
pEquip->SetBlock2d(GetBlkIdByName(csBlkName));
if(_tcsicmp(_T("$TwtSys$00000389"), csBlkName) == 0 ){
pEquip->SetHidePipe(FALSE);
}
else{
pEquip->SetHidePipe(TRUE);
}
ptStart.z = 0;
if (bModifyWell)// cet 2011.5.26 add
{
ptStart.z = dEle;
}
pEquip->SetLayoutRotation(Ucs2Wcs(0.0));
pEquip->SetAngle(nRotate2);
// zxl modify 2012.10.16
CString sWellLayer = dlg.GetWellLayer();
CString sWellSerialLayer = LAY_WELL_TEXT;
GetWellSerialLayer(sWellLayer, sWellSerialLayer);
pEquip->SetLabelLayer(InitLayer(sWellSerialLayer));
pEquip->SetWellName(dlg.m_csName);
pEquip->SetLocation(ptStart);
pEquip->SetTextHeight(g_nDimWellHeight);
pEquip->SetTextStyleId(InitTextStyle(g_csDimWellStyle));
//pEquip->SetScale(dlg.m_nScale);
// zxl 2013.07.26 modify
if (dlg.m_iDrawType == 1)
{
pEquip->SetScale(dlg.m_nScale / DocGetPScale());
dlg.m_dWellRadius = dlg.m_nScale;
dlg.UpdateData(FALSE);
}
else
{
pEquip->SetScale(dlg.m_nScale);
}
pEquip->setLayer(dlg.GetWellLayer());
pEquip->SetWellEleUp(dlg.m_nElevation);
pEquip->SetWellEleDown(0);
if(dlg.m_csDimPos == _T("不标注"))
pEquip->EnableDrawLabel(FALSE);
else
pEquip->EnableDrawLabel(TRUE, _tstof(dlg.m_csDimPos));
if(GetBlkDesName(dlg.m_csBlkName).Find(_T("方")) < 0)
pEquip->SetNumber(_T("CIRCLE-0.5"));
pEquip->setColor(AcCmColor()); //随层
AddToCurrentSpace(pEquip, Adesk::kTrue);
dlg.m_csName = PlusString(dlg.m_csName, 1, TRUE);
dlg.UpdateData(FALSE);
entLastWell.GetLast();
WriteXdata(entLastWell, _T("TG-WELL-RADIUS"), XString(_T("%.2f"), dlg.m_dWellRadius));
// cet 2011.5.26 add
if (bModifyWell)
{
AcDbObjectId idWell;
acdbGetObjectId(idWell, entLastWell);
vecWell.push_back(idWell);
}
TPipePerDocData *pData = GetCurPipeDocData();
pData->ApplyUpdates();
}
else{
entLastWell = entEq;
OPENOBJ_BEGIN(entLastWell, AcDb::kForRead, TDbWell, pEquip);
if(pEquip){
dlg.m_nScale = pEquip->GetScale();
dlg.m_nElevation = pEquip->GetWellEleUp();
}
OPENOBJ_END();
if(idx == 0)
dlg.m_iPipeSys = 0;
else if(idx == 5)
dlg.m_iPipeSys = 3;
else if(idx == 3)
dlg.m_iPipeSys = 1;
else if(idx == 7)
dlg.m_iPipeSys = 5;
else if(idx == 6)
dlg.m_iPipeSys = 4;
else if(idx == 14)
dlg.m_iPipeSys = 6;
else if(idx == 4)
dlg.m_iPipeSys = 2;
dlg.UpdateData(FALSE);
}
XPointList lstPt;
lstPt.NewAppend(ptStart);
double nOld = g_nSprinklerRadius;
double dJigLockAng(-1);
while(1){
TWellJig jig(ptStart);
jig.m_nLockAng = dJigLockAng;
dlg.UpdateData(TRUE);
dlg.m_csHead = dlg.GetHead();
int iSerial = GetCurWellSerial(dlg.m_csHead);
iSerial ++;
dlg.m_csName.Format(_T("%s%d"), dlg.m_csHead, iSerial);
dlg.UpdateData(FALSE);
// zxl 2013.07.26 add
if (dlg.m_iDrawType == 1)
{
dlg.m_dRealScale = dlg.m_nScale;
dlg.m_dWellRadius = dlg.m_nScale;
dlg.UpdateData(FALSE);
}
else
{
dlg.m_dOutScale = dlg.m_nScale;
}
double dDistWell = dlg.m_nDist;
if(!DocGetMeterUnitDraw())
dDistWell = dDistWell*1000;
if(dlg.m_iMode == 1)
jig.SetDist(dDistWell);
else if(dlg.m_iMode == 0)
jig.SetDist(0);
else if(dlg.m_iMode == 2)
jig.SetDist2(dDistWell);
else if(dlg.m_iMode == 3){//沿线定距
InsWellByLine(ptStart, entLastWell, dlg);
break;
}
// if(g_bEquipByScale)
//g_nSprinklerRadius = dlg.m_nScale/2*100;
// zxl 2013.07.26 modify
if (dlg.m_iDrawType == 0)
{
g_nSprinklerRadius = dlg.m_nScale/2*100;
}
else
{
g_nSprinklerRadius = dlg.m_nScale/2*100/DocGetPScale();
}
// else
// g_nSprinklerRadius = dlg.m_nScale/2*DocGetPScale();
jig.SetPrompt(_T("\n请点取井插入点[回退(U)/选取行向线(F)]<退出>:"));
jig.SetKeyword(_T("U F R"));
int nKeyIndex;
int nRetCode = jig.DoIt(&nKeyIndex);
if(nRetCode == RTKWORD){
if(nKeyIndex == 0){
int len = lstPt.Length();
if(len == 1) continue; //最后一个, 不能再退了
SHads_command(RTSTR, _T("UNDO"), RTSTR, _T("BACK"), NULL);
lstPt.Remove(len - 1);
XPoint ptTemp = *lstPt[len - 2];
jig.SetStartPoint(ptTemp);
ptStart = ptTemp;
}
else if(nKeyIndex == 1){
double s_angle(0);
int err_value=get_line_angle(s_angle);
if(err_value == RTNORM){
dJigLockAng = s_angle;
//jig.m_nLockAng = s_angle;
}
}
continue;
}
else if(nRetCode != RTNORM)
break;
dJigLockAng = -1;
if(dlg.m_iMode == 2)
{
XLine line(ptStart, jig.GetPickPoint(), 1);
double nRotate = line.Direction();
// double nRotate(0);
XCurveSegment seg;
seg = line;
XPointList lstPt;
GetPointList(seg, dDistWell, lstPt);
int len = lstPt.Length();
//int len = jig.m_pDrawEnt->m_lstPt.Length();
// if(len > 1){
// XPoint pt3 = *jig.m_pDrawEnt->m_lstPt[0];
// XPoint pt4 = *jig.m_pDrawEnt->m_lstPt[1];
// nRotate = Wcs2Ucs(ads_angle(pt3, pt4));
// }
CString csName = dlg.m_csName;
for(int i=1;i<len;i++){
XPoint ptIns = *lstPt[i];
TDbWell *pEquip = new TDbWell;
pEquip->SetBlock2d(GetBlkIdByName(dlg.m_csBlkName));
if(_tcsicmp(_T("$TwtSys$00000389"), dlg.m_csBlkName) == 0 ){
pEquip->SetHidePipe(FALSE);
nRotate += PI/2;
}
else
pEquip->SetHidePipe(TRUE);
pEquip->SetAngle(nRotate);
if(!!entLastWell && _tcsicmp(_T("$TwtSys$00000389"), dlg.m_csBlkName) != 0){
OPENOBJ_BEGIN(entLastWell, AcDb::kForWrite, TDbWell, pEquip2);
if(pEquip2){
pEquip2->SetAngle(nRotate);
}
OPENOBJ_END();
}
ptIns.z = 0;
pEquip->SetLocation(ptIns);
pEquip->SetLayoutRotation(Ucs2Wcs(0.0));
pEquip->SetWellName(csName);
pEquip->SetTextHeight(g_nDimWellHeight);
pEquip->SetTextStyleId(InitTextStyle(g_csDimWellStyle));
// pEquip->SetLabelLayer(InitLayer(LAY_WELL_TEXT)); zxl modify 2012.10.16
CString sWellLayer = dlg.GetWellLayer();
CString sWellSerialLayer = LAY_WELL_TEXT;
GetWellSerialLayer(sWellLayer, sWellSerialLayer);
pEquip->SetLabelLayer(InitLayer(sWellSerialLayer));
pEquip->SetWellEleDown(0);
// if(g_bEquipByScale)
// pEquip->SetScale(dlg.m_nScale);
// zxl 2013.07.26 modify
if (dlg.m_iDrawType == 1)
{
pEquip->SetScale(dlg.m_nScale / DocGetPScale());
}
else
{
pEquip->SetScale(dlg.m_nScale);
}
// else
// pEquip->SetScale(dlg.m_nScale*DocGetPScale());
pEquip->setLayer(dlg.GetWellLayer());
pEquip->SetWellEleUp(dlg.m_nElevation);
if(GetBlkDesName(dlg.m_csBlkName).Find(_T("方")) < 0)
pEquip->SetNumber(_T("CIRCLE-0.5"));
pEquip->setColor(AcCmColor()); //随层
if(dlg.m_csDimPos == _T("不标注"))
pEquip->EnableDrawLabel(FALSE);
else
pEquip->EnableDrawLabel(TRUE, _tstof(dlg.m_csDimPos));
AddToCurrentSpace(pEquip, Adesk::kTrue);
entLastWell.GetLast();
WriteXdata(entLastWell, _T("TG-WELL-RADIUS"), XString(_T("%.2f"), dlg.m_dWellRadius));
csName = PlusString(csName, 1, TRUE);
XPoint p1, p2;
//p1 = *jig.m_pDrawEnt->m_lstPt[i-1];
p1 = *lstPt[i-1];
p2 = ptIns;
if(dlg.m_bDrawPipe){
int iPipeIdx(0);
if(dlg.m_iPipeSys == 0)
iPipeIdx = 0;
else if(dlg.m_iPipeSys == 1)
iPipeIdx = 3;
else if(dlg.m_iPipeSys == 2)
iPipeIdx = 4;
else if(dlg.m_iPipeSys == 3)
iPipeIdx = 5;
else if(dlg.m_iPipeSys == 4)
iPipeIdx = 6;
else if(dlg.m_iPipeSys == 5)
iPipeIdx = 7;
else if(dlg.m_iPipeSys == 6)
iPipeIdx = 14;
DrawPipeByIdx(p1, p2, iPipeIdx, dlg.m_nGradient, _tstof(dlg.m_csDn), dlg.m_iMaterial);
}
}
break;//两点均布只执行一次，不连续
}
// zxl 2012.08.21 add
double nElev = 0.0;
int iNdx = -1;
GetPipeByPt(jig.GetPickPoint(), nElev, iNdx);
if (!dlg.m_bDrawPipe && iNdx >= 0 && dlg.GetWellStyleChangble())
{
if(iNdx == 0)
dlg.m_iPipeSys = 0;
else if(iNdx == 5)
dlg.m_iPipeSys = 3;
else if(iNdx == 3)
dlg.m_iPipeSys = 1;
else if(iNdx == 7)
dlg.m_iPipeSys = 5;
else if(iNdx == 6)
dlg.m_iPipeSys = 4;
else if(iNdx == 14)
dlg.m_iPipeSys = 6;
else if(iNdx == 4)
dlg.m_iPipeSys = 2;
dlg.UpdateData(FALSE);
dlg.m_csHead = dlg.GetHead();
int iSerial = GetCurWellSerial(dlg.m_csHead);
iSerial ++;
dlg.m_csName.Format(_T("%s%d"), dlg.m_csHead, iSerial);
if(dlg.m_iPipeSys == 0)
{ // 给水
dlg.m_csDn = _T("200");
dlg.m_nGradient = 0;
dlg.m_iMaterial = 1;//给水铸铁管
dlg.UpdateData(FALSE);
}
else
{
dlg.m_csDn = _T("300");
dlg.m_nGradient = 0.003;
dlg.m_iMaterial = 12;
dlg.UpdateData(FALSE);
}
dlg.m_nElevation = 0.0;
dlg.UpdateData(FALSE);
}
XPoint ptIns = jig.GetPickPoint();
XPoint ptUcs = Ucs2Wcs(jig.GetPickPoint());
if(jig.m_nLockAng > -1){
ptUcs = jig.GetCorrectPt();
ptIns = jig.GetCorrectPt();
jig.m_nLockAng = -1;
}
SHads_command(RTSTR, _T(".UNDO"), RTSTR, _T("MARK"), NULL); // Make a undo mark
dlg.UpdateData(TRUE);
Entity entEq2 = GetWellByPt(ptIns, idx);
if(!!entEq2){
TCHAR szLayer[256];
entEq2.GetData(8, szLayer);
if(_tcsicmp(szLayer, dlg.GetWellLayer()) == 0){
if(dlg.m_bDrawPipe){
int iPipeIdx(0);
if(dlg.m_iPipeSys == 0)
iPipeIdx = 0;
else if(dlg.m_iPipeSys == 1)
iPipeIdx = 3;
else if(dlg.m_iPipeSys == 2)
iPipeIdx = 4;
else if(dlg.m_iPipeSys == 3)
iPipeIdx = 5;
else if(dlg.m_iPipeSys == 4)
iPipeIdx = 6;
else if(dlg.m_iPipeSys == 5)
iPipeIdx = 7;
else if(dlg.m_iPipeSys == 6)
iPipeIdx = 14;
DrawPipeByIdx(ptStart, ptIns, iPipeIdx, dlg.m_nGradient, _tstof(dlg.m_csDn), dlg.m_iMaterial);
}
break;
}
}
TDbWell *pEquip = new TDbWell;
double nRotate = ads_angle(ptStart, ptIns);
pEquip->SetBlock2d(GetBlkIdByName(dlg.m_csBlkName));
if(_tcsicmp(_T("$TwtSys$00000389"), dlg.m_csBlkName) == 0 ){
pEquip->SetHidePipe(FALSE);
nRotate += PI/2;
}
else
pEquip->SetHidePipe(TRUE);
pEquip->SetAngle(nRotate);
if(!!entLastWell && _tcsicmp(_T("$TwtSys$00000389"), dlg.m_csBlkName) != 0){
OPENOBJ_BEGIN(entLastWell, AcDb::kForWrite, TDbWell, pEquip2);
if(pEquip2){
pEquip2->SetAngle(nRotate);
}
OPENOBJ_END();
}
ptIns.z = 0;
pEquip->SetLocation(ptIns);
pEquip->SetLayoutRotation(Ucs2Wcs(0.0));
pEquip->SetWellName(dlg.m_csName);
pEquip->SetTextHeight(g_nDimWellHeight);
pEquip->SetTextStyleId(InitTextStyle(g_csDimWellStyle));
// pEquip->SetLabelLayer(InitLayer(LAY_WELL_TEXT));zxl modify 2012.10.16
CString sWellLayer = dlg.GetWellLayer();
CString sWellSerialLayer = LAY_WELL_TEXT;
GetWellSerialLayer(sWellLayer, sWellSerialLayer);
pEquip->SetLabelLayer(InitLayer(sWellSerialLayer));
pEquip->SetWellEleDown(0);
// if(g_bEquipByScale)
//pEquip->SetScale(dlg.m_nScale);
// zxl 2013.07.26 modify
if (dlg.m_iDrawType == 1)
{
pEquip->SetScale(dlg.m_nScale / DocGetPScale());
}
else
{
pEquip->SetScale(dlg.m_nScale);
}
// else
// pEquip->SetScale(dlg.m_nScale*DocGetPScale());
pEquip->setLayer(dlg.GetWellLayer());
pEquip->SetWellEleUp(dlg.m_nElevation);
if(GetBlkDesName(dlg.m_csBlkName).Find(_T("方")) < 0)
pEquip->SetNumber(_T("CIRCLE-0.5"));
pEquip->setColor(AcCmColor()); //随层
if(dlg.m_csDimPos == _T("不标注"))
pEquip->EnableDrawLabel(FALSE);
else
pEquip->EnableDrawLabel(TRUE, _tstof(dlg.m_csDimPos));
AddToCurrentSpace(pEquip, Adesk::kTrue);
entLastWell.GetLast();
WriteXdata(entLastWell, _T("TG-WELL-RADIUS"), XString(_T("%.2f"), dlg.m_dWellRadius));
if(dlg.m_bDrawPipe){
int iPipeIdx(0);
if(dlg.m_iPipeSys == 0)
iPipeIdx = 0;
else if(dlg.m_iPipeSys == 1)
iPipeIdx = 3;
else if(dlg.m_iPipeSys == 2)
iPipeIdx = 4;
else if(dlg.m_iPipeSys == 3)
iPipeIdx = 5;
else if(dlg.m_iPipeSys == 4)
iPipeIdx = 6;
else if(dlg.m_iPipeSys == 5)
iPipeIdx = 7;
else if(dlg.m_iPipeSys == 6)
iPipeIdx = 14;
DrawPipeByIdx(ptStart, ptIns, iPipeIdx, dlg.m_nGradient, _tstof(dlg.m_csDn), dlg.m_iMaterial);
}
ptStart = ptIns;
jig.SetStartPoint(ptStart);
lstPt.NewAppend(ptStart);
dlg.m_csName = PlusString(dlg.m_csName, 1, TRUE);
dlg.UpdateData(FALSE);
TPipePerDocData *pData = GetCurPipeDocData();
pData->ApplyUpdates();
}
UNDOE;
g_nSprinklerRadius = nOld;
g_nWellRadius = dlg.m_nScale;
CRegProperty regProp(GetRegLocation(), _T("TWTConfig"));
regProp.SetTopRootKey(HKEY_CURRENT_USER);
regProp.SetValue(_T("WellRadius"), dlg.m_dOutScale);
regProp.SetValue(_T("WellRadiusReal"), dlg.m_dRealScale);// zxl 2013.07.26 add
regProp.SetValue(_T("WellRadiusDrawType"), dlg.m_iDrawType);// zxl 2013.07.26 add
regProp.SetValue(_T("LastWellBlk"), dlg.m_csBlkName);
SHads_command(RTNONE);
dlg.DestroyWindow();
// cet 2011.5.26 add 将井插入点还原
std::vector<AcDbObjectId>::iterator it;
for (it = vecWell.begin(); it != vecWell.end(); it++)
{
TDbWell *pWell = NULL;
acdbOpenObject(pWell, *it, AcDb::kForWrite);
if (pWell != NULL)
{
XPoint pt = pWell->GetLocation();
pt.z = 0.0;
pWell->SetLocation(pt);
pWell->close();
}
}
}
//***************************************************************************************************
// 给水节点
//***************************************************************************************************
void InsOutdoorFeedNode()
{
int nOsMode=0;
xg_getvar(_T("OSMODE"), &nOsMode);
nOsMode &= ~0x4000;
nOsMode |= OS_INT|OS_END|OS_NEA;
XPushVar<int> vOsMode(_T("OSMODE"), nOsMode);
CString csDwb = g_csDwbPath + _T("TwtSys");
XString xsBlockName;
if(LoadDwbBlock(csDwb, _T("00000389"), xsBlockName) != RTNORM)
return;
g_nInsBlkRotate = 0;
InitTwtTextStyle(g_csDimWellStyle);
XPoint ptStart;
int ret0(0);
Entity entLastWell;
if(ads_getpoint(NULL, _T("\n请点取插入点[输入参考点(F)]<退出>:"), ptStart) != RTNORM)
return;
UNDOB;
ptStart = Ucs2Wcs(ptStart);
double nDist(0);
int idx(0);
Entity entEq = GetWellByPt(ptStart, idx);
if(!entEq){
double nElevation(0), nRotate2(0);
int iPipeIdx(0);
Entity entWire = GetPipeByPt(ptStart, nElevation, iPipeIdx);
if(!!entWire){
XPoint pt3, pt4;
GetPipePoint(entWire, pt3, pt4);
nRotate2 = ads_angle(pt3, pt4);
OPENOBJ_BEGIN(entWire, AcDb::kForWrite, TDbPipe, pPipe);
if(pPipe){
AcGePoint3d p1 = ptStart;
AcGePoint3d p2;
pPipe->getClosestPointTo(p1,p2);
pPipe->BreakAt(p2, PS_SNAP);
}
OPENOBJ_END();
}
TDbWell *pEquip = new TDbWell;
pEquip->SetBlock2d(GetBlkIdByName(xsBlockName));
pEquip->SetHidePipe(FALSE);
ptStart.z = 0;
pEquip->SetAngle(nRotate2);
pEquip->SetLabelLayer(InitLayer(LAY_WELL_TEXT));
pEquip->SetLocation(ptStart);
pEquip->SetTextHeight(g_nDimWellHeight);
pEquip->SetTextStyleId(InitTextStyle(g_csDimWellStyle));
pEquip->SetScale(g_nWellRadius);
pEquip->setLayer(LAY_WELL_FEED);
pEquip->SetWellEleUp(0);
pEquip->SetWellEleDown(0);
pEquip->EnableDrawLabel(FALSE);
pEquip->setColor(AcCmColor()); //随层
AddToCurrentSpace(pEquip, Adesk::kTrue);
entLastWell.GetLast();
}
else{
entLastWell = entEq;
}
XPointList lstPt;
lstPt.NewAppend(ptStart);
double nOld = g_nSprinklerRadius;
TWellJig jig(ptStart);
while(1){
jig.m_nDist = 0;
jig.SetPrompt(_T("\n请点取井插入点[回退(U)/选取行向线(F)]<退出>:"));
jig.SetKeyword(_T("U F R"));
int nKeyIndex;
int nRetCode = jig.DoIt(&nKeyIndex);
if(nRetCode == RTKWORD){
if(nKeyIndex == 0){
int len = lstPt.Length();
if(len == 1) continue; //最后一个, 不能再退了
SHads_command(RTSTR, _T("UNDO"), RTSTR, _T("BACK"), NULL);
lstPt.Remove(len - 1);
XPoint ptTemp = *lstPt[len - 2];
jig.SetStartPoint(ptTemp);
ptStart = ptTemp;
}
else if(nKeyIndex == 1){
double s_angle(0);
int err_value=get_line_angle(s_angle);
if(err_value == RTNORM){
jig.m_nLockAng = s_angle;
}
}
continue;
}
else if(nRetCode != RTNORM)
break;
XPoint ptIns = jig.GetPickPoint();
XPoint ptUcs = Ucs2Wcs(jig.GetPickPoint());
if(jig.m_nLockAng > -1){
ptUcs = jig.GetCorrectPt();
ptIns = jig.GetCorrectPt();
jig.m_nLockAng = -1;
}
SHads_command(RTSTR, _T(".UNDO"), RTSTR, _T("MARK"), NULL); // Make a undo mark
TDbWell *pEquip = new TDbWell;
double nRotate = ads_angle(ptStart, ptIns);
pEquip->SetBlock2d(GetBlkIdByName(xsBlockName));
pEquip->SetHidePipe(FALSE);
nRotate += PI/2;
pEquip->SetAngle(nRotate);
pEquip->SetScale(g_nWellRadius);
ptIns.z = 0;
pEquip->SetLocation(ptIns);
pEquip->SetTextHeight(g_nDimWellHeight);
pEquip->SetTextStyleId(InitTextStyle(g_csDimWellStyle));
pEquip->SetLabelLayer(InitLayer(LAY_WELL_TEXT));
pEquip->SetWellEleDown(0);
pEquip->setLayer(LAY_WELL_FEED);
pEquip->SetWellEleUp(0);
pEquip->setColor(AcCmColor()); //随层
pEquip->EnableDrawLabel(FALSE);
AddToCurrentSpace(pEquip, Adesk::kTrue);
entLastWell.GetLast();
DrawPipeByIdx(ptStart, ptIns, 0, 0, 300, 0);
ptStart = ptIns;
jig.SetStartPoint(ptStart);
lstPt.NewAppend(ptStart);
TPipePerDocData *pData = GetCurPipeDocData();
pData->ApplyUpdates();
}
UNDOE;
}
/////////////////////////////////////////////////////////////////////////////
// CWellDlg dialog
IMPLEMENT_DYNAMIC(CWellDlg, CModelessDialog)
int CWellDlg::m_iPipeSys = 3;
int CWellDlg::m_iMaterial = 12;
double CWellDlg::m_nDist = 20;
double CWellDlg::m_dWellRadius = 700;
CString CWellDlg::m_csDimPos = _T("1.5");
BOOL CWellDlg::m_bDrawPipe = TRUE;
double CWellDlg::m_nElevation = 0.0; // cet 2010.9.7 add
double CWellDlg::m_nGradient = 0.003; // cet 2010.9.7 add
CString CWellDlg::m_csDn = _T("300"); // cet 2010.9.7 add
BOOL CWellDlg::m_bFirstRun = TRUE; // cet 2010.9.7 add
int CWellDlg::m_iMode = 0; // cet 2011.6.14 add
int CWellDlg::m_iDrawType = 0; // zxl 2013.07.26 add
double CWellDlg::m_dRealScale = 800; // zxl 2013.07.26 add
double CWellDlg::m_dOutScale = g_nWellRadius; // zxl 2013.07.26 add
CWellDlg::CWellDlg(CWnd* pParent /*=NULL*/)
: CModelessDialog(CWellDlg::IDD, pParent)
{
//{{AFX_DATA_INIT(CWellDlg)
m_nScale = g_nWellRadius;
m_csName = _T("Y1");
//}}AFX_DATA_INIT
m_csHead = _T("Y");
m_csBlkName = _T("$TwtSys$00000187");
m_bCanChangeStyle = true;
m_bChangeSys = false;
}
bool CWellDlg::GetWellStyleChangble()
{
return m_bCanChangeStyle;
}
void CWellDlg::DoDataExchange(CDataExchange* pDX)
{
CModelessDialog::DoDataExchange(pDX);
//{{AFX_DATA_MAP(CWellDlg)
DDX_Control(pDX, IDC_STATIC_REALDN, m_wndReal);
DDX_Control(pDX, IDC_STATIC_OUT, m_wndOut);
DDX_Control(pDX, IDC_EDIT_WELL_RADIUS, m_edtRadius);
DDX_Control(pDX, IDC_COMBO_MAT, m_comboMat);
DDX_Text(pDX, IDC_EDIT_DIM, m_nScale);
DDX_Text(pDX, IDC_EDIT_NAME, m_csName);
DDX_Check(pDX, IDC_CHECK_PIPE, m_bDrawPipe);
DDX_Text(pDX, IDC_EDIT_ELEV, m_nElevation);
DDX_Radio(pDX, IDC_RADIO_MODE1, m_iMode);
DDX_Text(pDX, IDC_EDIT_DIST, m_nDist);
DDX_Text(pDX, IDC_EDIT_GRADIENT, m_nGradient);
DDX_CBString(pDX, IDC_COMBO_DN, m_csDn);
DDX_CBIndex(pDX, IDC_COMBO_MAT, m_iMaterial);
DDX_CBIndex(pDX, IDC_COMBO_PIPE, m_iPipeSys);
DDX_CBString(pDX, IDC_COMBO_DIMPOS, m_csDimPos);
DDX_Text(pDX, IDC_EDIT_WELL_RADIUS, m_dWellRadius);
DDX_Radio(pDX, IDC_RADIO_OUT, m_iDrawType);
//}}AFX_DATA_MAP
}
BEGIN_MESSAGE_MAP(CWellDlg, CModelessDialog)
//{{AFX_MSG_MAP(CWellDlg)
ON_WM_PAINT()
ON_WM_CLOSE()
ON_BN_CLICKED(IDC_CHECK_PIPE, OnCheckPipe)
ON_BN_CLICKED(IDC_RADIO_MODE1, OnRadioMode1)
ON_BN_CLICKED(IDC_RADIO_MODE2, OnRadioMode2)
ON_EN_KILLFOCUS(IDC_EDIT_DIST, OnKillfocusEditDist)
ON_CBN_SELCHANGE(IDC_COMBO_PIPE, OnSelchangeComboPipe)
ON_BN_CLICKED(IDC_PREVIEW_WELL, OnPreviewWell)
ON_BN_CLICKED(IDC_RADIO_MODE3, OnRadioMode3)
ON_BN_CLICKED(IDC_RADIO_MODE4, OnRadioMode4)
ON_BN_CLICKED(IDC_RADIO_INTERSECT, OnRadioMode5)
ON_BN_CLICKED(IDC_RADIO_OUT, OnRadioOut)
ON_BN_CLICKED(IDC_RADIO_REAL, OnRadioReal)
//}}AFX_MSG_MAP
END_MESSAGE_MAP()
/////////////////////////////////////////////////////////////////////////////
// CWellDlg message handlers
BOOL CWellDlg::OnInitDialog()
{
CModelessDialog::OnInitDialog();
int iold = m_iMaterial;
CWnd *pWnd = GetDlgItem(IDC_EDIT_DIST);
// pWnd->EnableWindow(FALSE); cet 2011.6.14 modify
if (pWnd != NULL)
{
pWnd->EnableWindow(m_iMode == 0 ? FALSE : TRUE);
}
OpenSlide();
m_csHead = GetHead();
int iSerial = GetCurWellSerial(m_csHead);
iSerial ++;
m_csName.Format(_T("%s%d"), m_csHead, iSerial);
XStringList lstMat;
GetPipeMaterialList(lstMat);
for(int i=0;i<lstMat.Length();i++){
m_comboMat.AddString(lstMat[i]);
}
m_iMaterial = iold;
CRegProperty regProp(GetRegLocation(), _T("TWTConfig"));
regProp.SetTopRootKey(HKEY_CURRENT_USER);
CString csTmp;
regProp.GetValue(_T("LastWellBlk"), csTmp);
regProp.GetValue(_T("WellRadiusReal"), m_dRealScale); // zxl 2013.07.26 add
regProp.GetValue(_T("WellRadius"), m_dOutScale);// zxl 2013.07.26 add
regProp.GetValue(_T("WellRadiusDrawType"), m_iDrawType);// zxl 2013.07.26 add
if (m_iDrawType == 0)
{
m_nScale = m_dOutScale;
m_wndOut.SetWindowText(_T("出图尺寸mm"));
m_wndReal.ShowWindow(SW_SHOW);
m_edtRadius.ShowWindow(SW_SHOW);
}
else
{
m_nScale = m_dRealScale;
m_wndOut.SetWindowText(_T("实际尺寸mm"));
m_wndReal.ShowWindow(SW_HIDE);
m_edtRadius.ShowWindow(SW_HIDE);
m_dWellRadius = m_dRealScale;
}
if(csTmp != _T(""))
m_csBlkName = csTmp;
// cet 2010.9.7 modify
// if(m_iPipeSys == 0){ // 给水
if(m_iPipeSys == 0 && m_bFirstRun){ // 给水并且第一次运行
m_csDn = _T("200");
m_nGradient = 0;
m_iMaterial = 1;//给水铸铁管
m_bFirstRun = FALSE; // cet 2010.9.7 add
}
if (m_iMode == 4) // zxl add 2013.04.15
{
CWnd *pWnd2 = GetDlgItem(IDC_CHECK_PIPE);
ASSERT(pWnd2);
pWnd2->EnableWindow(FALSE);
}
UpdateData(FALSE);
return TRUE; // return TRUE unless you set the focus to a control
// EXCEPTION: OCX Property Pages should return FALSE
}
void CWellDlg::OnPaint()
{
CPaintDC dc(this); // device context for painting
OpenSlide();
}
void CWellDlg::OpenSlide()
{
UpdateData(TRUE);
CWnd *pImageBox1 = GetDlgItem(IDC_PREVIEW_WELL);
CString csSldName;
CString csTK, csRecord;
SplitBlkStr(m_csBlkName, csTK, csRecord);
csSldName.Format(_T("TWTSYS(%s)"), csRecord);
DrawSlide((const TCHAR*)csSldName, pImageBox1);
}
void CWellDlg::OnClose()
{
CModelessDialog::OnClose();
acedPostCommand(_T("\33\33"));
}
void CWellDlg::OnCheckPipe()
{
UpdateData(TRUE);
CWnd *pWnd = GetDlgItem(IDC_COMBO_PIPE);
if(m_bDrawPipe)
pWnd->EnableWindow(TRUE);
else
{
pWnd->EnableWindow(FALSE);
m_bCanChangeStyle = false;//zxl 2012.08.21 add
}
}
void CWellDlg::OnRadioMode1()
{
// zxl 2013.04.15 add 布置井方式改变时，发送不同命令(下同)
CString sCmd = _T("R ");
if (m_iMode == 4)
{
sCmd = _T(" ");
}
UpdateData(TRUE);
CWnd *pWnd = GetDlgItem(IDC_EDIT_DIST);
pWnd->EnableWindow(FALSE);
CWnd *pWnd2 = GetDlgItem(IDC_CHECK_PIPE);
ASSERT(pWnd2);
pWnd2->EnableWindow(TRUE);
PostCommand(sCmd, false);
acedGetAcadDwgView()->SetFocus();
}
void CWellDlg::OnRadioMode2()
{
CString sCmd = _T("R ");
if (m_iMode == 4)
{
sCmd = _T(" ");
}
UpdateData(TRUE);
CWnd *pWnd = GetDlgItem(IDC_EDIT_DIST);
pWnd->EnableWindow(TRUE);
CWnd *pWnd2 = GetDlgItem(IDC_CHECK_PIPE);
ASSERT(pWnd2);
pWnd2->EnableWindow(TRUE);
PostCommand(sCmd, false);
acedGetAcadDwgView()->SetFocus();
}
void CWellDlg::OnRadioMode3()
{
CString sCmd = _T("R ");
if (m_iMode == 4)
{
sCmd = _T(" ");
}
UpdateData(TRUE);
CWnd *pWnd = GetDlgItem(IDC_EDIT_DIST);
pWnd->EnableWindow(TRUE);
CWnd *pWnd2 = GetDlgItem(IDC_CHECK_PIPE);
ASSERT(pWnd2);
pWnd2->EnableWindow(TRUE);
PostCommand(sCmd, false);
acedGetAcadDwgView()->SetFocus();
}
void CWellDlg::OnRadioMode4()
{
CString sCmd = _T("R ");
if (m_iMode == 4)
{
sCmd = _T(" ");
}
UpdateData(TRUE);
CWnd *pWnd = GetDlgItem(IDC_EDIT_DIST);
pWnd->EnableWindow(TRUE);
CWnd *pWnd2 = GetDlgItem(IDC_CHECK_PIPE);
ASSERT(pWnd2);
pWnd2->EnableWindow(TRUE);
PostCommand(sCmd, false);
acedGetAcadDwgView()->SetFocus();
}
void CWellDlg::OnKillfocusEditDist()
{
CWnd *pWnd = GetFocus();
CWnd *pWnd2 = GetDlgItem(IDC_RADIO_MODE1);
if(pWnd2 == pWnd)//如果修改完长度，又改为“自由”，容易引起死锁
return;
double nTmp = m_nDist;
UpdateData(TRUE);
if(fabs(nTmp - m_nDist) < 0.01)
return;
PostCommand(_T("R "), false);
}
void CWellDlg::OnSelchangeComboPipe()
{
int iOld = m_iPipeSys;
UpdateData(TRUE);
if (iOld == m_iPipeSys) // cet 2010.9.7 add
{
return;
}
if(m_iPipeSys == 0){ // 给水
m_csDn = _T("200");
m_nGradient = 0;
m_iMaterial = 1;//给水铸铁管
UpdateData(FALSE);
}
else /*if(iOld == 0)*/{ // cet 2010.9.7 modify 删除判断条件
m_csDn = _T("300");
m_nGradient = 0.003;
m_iMaterial = 12;
UpdateData(FALSE);
}
// cet 2010.9.7 add
m_nElevation = 0.0;
UpdateData(FALSE);
CString sCmd = _T("R ");
if (m_iMode == 4)
{
sCmd = _T(" ");
}
PostCommand(sCmd, false);
acedGetAcadDwgView()->SetFocus();
m_bChangeSys = true;
}
void CWellDlg::OnPreviewWell()
{
CString csSldName;
CString csTK, csRecord;
SplitBlkStr(m_csBlkName, csTK, csRecord);
csSldName.Format(_T("TWTSYS(%s)"), csRecord);
CTemporaryResourceOverride vTemp;
CSelectBlkDlg dlg;
dlg.m_csTkName = _T("TWTSYS");
dlg.m_csType = _T("室外\\井");
CWnd *pWnd = GetDlgItem(IDC_PREVIEW_WELL);
CRect rect;
dlg.m_staticSlide.m_csCurRecord = csSldName;
pWnd->GetWindowRect(&rect);
dlg.m_ptBase = rect.TopLeft();
if(dlg.DoModal() == IDOK){
CString csRet = dlg.m_staticSlide.m_csCurRecord;
XString xsTKName, xsRocord, xsTmp;
SplitSlbName(csRet, xsTKName, xsRocord);
AcDbDatabase *dwg=acdbCurDwg();
AcAxDocLock docLock(dwg);
VERIFY(docLock.lockStatus() == Acad::eOk);
if(LoadDwbBlock((const TCHAR*)xsTKName, (const TCHAR*)xsRocord, xsTmp) != RTNORM)
return;
m_csBlkName = (const TCHAR*)xsTmp;
OpenSlide();
}
}
const TCHAR* CWellDlg::GetHead()
{
UpdateData(TRUE);
if(m_iPipeSys == 0)
return g_csPipeDim[0];
else if(m_iPipeSys == 1)
return g_csPipeDim[3];
else if(m_iPipeSys == 2)
return g_csPipeDim[4];
else if(m_iPipeSys == 3)
return g_csPipeDim[5];
else if(m_iPipeSys == 4)
return g_csPipeDim[6];
else if(m_iPipeSys == 5)
return g_csPipeDim[7];
else if(m_iPipeSys == 6)
return g_csPipeDim[9];
return _T("");
}
const TCHAR* CWellDlg::GetPipeLayer()
{
UpdateData(TRUE);
if(m_iPipeSys == 0)
return LAY_PIPE_FEED;
else if(m_iPipeSys == 1)
return LAY_PIPE_DIRT;
else if(m_iPipeSys == 2)
return LAY_PIPE_USELESS;
else if(m_iPipeSys == 3)
return LAY_PIPE_RAIN;
else if(m_iPipeSys == 4)
return LAY_PIPE_USED;
else if(m_iPipeSys == 5)
return LAY_PIPE_FIRE;
else if(m_iPipeSys == 6)
return LAY_PIPE_OTHER;
return _T("");
}
const TCHAR* CWellDlg::GetWellLayer()
{
UpdateData(TRUE);
if(m_iPipeSys == 0){
InitLayer(LAY_WELL_FEED);
return LAY_WELL_FEED;
}
else if(m_iPipeSys == 1){
InitLayer(LAY_WELL_DIRT);
return LAY_WELL_DIRT;
}
else if(m_iPipeSys == 2){
InitLayer(LAY_WELL_USELESS);
return LAY_WELL_USELESS;
}
else if(m_iPipeSys == 3){
InitLayer(LAY_WELL_RAIN);
return LAY_WELL_RAIN;
}
else if(m_iPipeSys == 4){
InitLayer(LAY_WELL_USED);
return LAY_WELL_USED;
}
else if(m_iPipeSys == 5){
InitLayer(LAY_WELL_FIRE);
return LAY_WELL_FIRE;
}
else if(m_iPipeSys == 6){
InitLayer(LAY_WELL_OTHER);
return LAY_WELL_OTHER;
}
return _T("");
}
// 交点布置井 zxl 2013.04.15 add
void CWellDlg::OnRadioMode5()
{
UpdateData(TRUE);
CWnd *pWnd = GetDlgItem(IDC_EDIT_DIST);
ASSERT(pWnd);
pWnd->EnableWindow(FALSE);
CWnd *pWnd2 = GetDlgItem(IDC_CHECK_PIPE);
ASSERT(pWnd2);
pWnd2->EnableWindow(FALSE);
PostCommand(_T("R "), false);
acedGetAcadDwgView()->SetFocus();
}
void CWellDlg::OnRadioOut()
{
DrawTypeChanged();
}
void CWellDlg::OnRadioReal()
{
DrawTypeChanged();
}
void CWellDlg::DrawTypeChanged()
{
int nOldType = m_iDrawType;
UpdateData(TRUE);
if (m_iDrawType == 0 && nOldType != m_iDrawType)
{
m_dRealScale = m_nScale;
m_wndOut.SetWindowText(_T("出图尺寸mm"));
m_wndReal.ShowWindow(SW_SHOW);
m_edtRadius.ShowWindow(SW_SHOW);
m_nScale = m_dOutScale;
m_dWellRadius = 700;
}
else if (m_iDrawType == 1 && nOldType != m_iDrawType)
{
m_dOutScale = m_nScale;
m_wndOut.SetWindowText(_T("实际尺寸mm"));
m_wndReal.ShowWindow(SW_HIDE);
m_edtRadius.ShowWindow(SW_HIDE);
m_nScale = m_dRealScale;
m_dWellRadius = m_dRealScale;
}
UpdateData(FALSE);
PostCommand(_T("R "), false);
acedGetAcadDwgView()->SetFocus();
}
Reference in new issue View Git Blame Copy Permalink